                     CNET PRO200WL PCI Fast Ethernet Adapters
                               NDIS 3.0 Driver
             For Windows for Workgroups v3.11 Installation Guide
             ===================================================


Installation Procedure 
======================

 1. From the "Program Manager" windows, click the "Network" icon.

 2. In the "Network" window, double-click "Network Setup."

 3. In the "Network Setup" window, click "Drivers."

 4. In the "Network Drivers" window, click the "Add Adapter..." button.

 5. When the "Add Network Adapter" window shows up, click the "Unlisted or
    Updated Network Adapter" item for the new driver. Then, click the <OK>
    button.

 6. Insert the driver diskette into a floppy disk drive 'A'.

 7. Enter the driver path, and then click <OK> button.

     A:\WFW311

 8. The Unlisted or Updated Network Adapter windows will show the name of the
    adapter, and then highlight it. Click <OK> button.

 9. Close and exit all of the windows. The system will automatically modify the
    CONFIG.SYS, AUTOEXEC.BAT, PROTOCOL.INI, and SYSTEM.INI files.


Setup Driver Parameters 
=======================
Only one parameter can be set in driver installation & reconfiguration.

    Media Speed : default is Auto Detection.

    AutoDetect  : start N-WAY function to perform media speed detection during
                  driver initialization.

    FM_10M_HALF : Media speed is set to 10 Mbps and Half-duplex mode.

    FM_10M_FULL : Media speed is set to 10 Mbps and Full-duplex mode.

    FM_100M_HALF: Media speed is set to 100 Mbps and Half-duplex mode.

    FM_100M_FULL: Media speed is set to 100Mbps Full-duplex mode.


Sample Configuration Files
==========================

 1. CONFIG.SYS File
     FILES=30
     BUFFERS=30
     LASTDRIVE=Z
     DEVICE=C:\WFW311\HIMEM.SYS
     DEVICE=C:\WFW311\IFSHLP.SYS
     DEVICE=C:\WFW311\PROTMAN.DOS /I:C:\WFW311
     DEVICE=C:\WFW311\DM9PCI.DOS
     DEVICE=C:\WFW311\NDISHLP.SYS
     STACKS=9,256

 2. AUTOEXEC.BAT File
     C:\WFW311\SMARTDRV.EXE
     C:\WFW311\net start
     PATH C:\WFW311;
     SET TEMP=C:\WFW311\TEMP



