
                   comp.os.os2.networking.misc      (Usenet)

                 Saturday, 11-Dec-1999 to Friday, 17-Dec-1999

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              11-Dec-99 05:33:02
  To: All                                               11-Dec-99 03:29:26
Subj: Re: Networking a HP LaserJet4...

From: James Moe <sma.spam-not@rtd.com>


"Dave {Reply Address in.sig}" wrote:
> 
> >>
> >  As I recall, HP is discontinuing ALL versions of JetAdmin, not just
> >os/2. The replacement is WebJetAdmin.
> >
> Which is not supported in an OS/2-only version as far as I can tell,
> you need the NT server stuff.
> 
  I have WebJetAdmon running on my computer at work which is os/2.

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: 72764.2166@csi.com                                11-Dec-99 00:42:16
  To: All                                               11-Dec-99 03:29:26
Subj: Re: Connecting to a Linux server

From: "Barry" <72764.2166@csi.com>

Lorne,

I just downloaded and installed WR8610, but got the same results.  I also
noticed there is a WR8620, should I apply that fix or is it buggy?

Barry


On Fri, 10 Dec 1999 05:47:00 GMT, Lorne Sunley wrote:

>On Fri, 10 Dec 1999 05:02:54, "Barry" <72764.2166@csi.com> wrote:
>
>> I have 2 computers networked.  Computer #1 runs Red Hat Linux 6.0, 
Computer
>> #2 is a dual boot OS/2-WIN98 computer.  If I boot Computer #2 to WIN98 and
>> set it up to use either DHCP or manually entering of the IP address, I do
>> connect to the Linux box and see the shares.  
>> If I boot computer #2 to OS/2 and setup TCPIP to manually enter the IP
>> address, I do connect to the Linux box and see the shares.
>> However, If I change the TCPIP settings to automatically get IP address
using
>> the Linux computer's DHCP server (and that is the only change I am making),
>> reboot, I do NOT see the Linux box.  I know the DHCP is working okay on the
>> OS/2 side since the DHCP monitor shows a valid lease with the correct IP
>> address (the same IP address that shows when I boot WIN98 using DHCP).  Of
>> course if I change back to manually entering the IP address, the shares
then
>> show up.  Any ideas?
>> 
>
>What version of MPTS do you have installed?
>
>There are bugs in the earlier releases of MPTS and it's
>DHCP handling. If you haven't tried it yet update the
>MPTS level to WR8610.
>
>--
>
>Lorne Sunley
>



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MindSpring Enterprises (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           11-Dec-99 05:59:04
  To: All                                               11-Dec-99 03:29:27
Subj: Re: Connecting to a Linux server

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Sat, 11 Dec 1999 05:42:33, "Barry" <72764.2166@csi.com> wrote:

> Lorne,
> 
> I just downloaded and installed WR8610, but got the same results.  I also
> noticed there is a WR8620, should I apply that fix or is it buggy?
> 

<snip>

You might as well. That one is updated with the same
tool you use to apply the regular OS fixpacks. So you 
will need the CSF 1.41 fixtool.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  11-Dec-99 04:44:19
  To: All                                               11-Dec-99 10:16:29
Subj: Can one static (ADSL) IP be shared by two computers without setting up 

From: Robert Holmgren <holmgren@idt.net>

I have a 5 port hub and a static IP ADSL connection.  I'd like to share
the connection between two computers, both attached to the hub (DSL
modem also attached to the hub).  Does anybody know whether this can be
done, and if so, generally what the strategy is?  Can I avoid installing
OS/2 Peer (which seems painful, and doesn't yield any additional
benefits that I can see)?  TIA

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: lamikr@cc.jyu.fi                                  11-Dec-99 14:48:21
  To: All                                               11-Dec-99 10:17:00
Subj: Telewell PCI modem and OS/2?

From: lamikr <lamikr@cc.jyu.fi>

Does anybody know will telewell's PCI modem work with OS/2?
(TW-5614SI PCI K56Flex & V.90 FAX/modem)

Mika

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: University of Jyvaskyla, Finland (1:109/42)

+----------------------------------------------------------------------------+

From: bj@fx.dk                                          11-Dec-99 15:56:13
  To: All                                               11-Dec-99 14:33:26
Subj: Re: Injoy Firewall logging

From: Bjarne Jensen <bj@fx.dk>

> But the product doesn't behave as documented. (see below)

Well, no reason for such an assertion when you have yet to
figure out what the exact problem is. I can guarantee you
that if logging is turned off in the right places, then it's
really OFF!

> My problem is that I have logging control = disabled on
>all my rules, yet the hard drive goes constantly whenever
>the firewall is accessed,  and the log shows every single

Either logging it turned off in the wrong places or you have
forgot to turn off the trace facility in gwpm.exe. If logging
really is what gives the harddisk ticks then simply look
directly in the log to see which firewall rule that is
responsible.

I think you'll find that the harddisk ticks are caused by
something else. Maybe accounting rules?

I can assist you if you e-mail me privately or on the InJoy
mailing list.





Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           11-Dec-99 16:16:26
  To: All                                               11-Dec-99 14:33:26
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net> 
wrote:

> I have a 5 port hub and a static IP ADSL connection.  I'd like to share
> the connection between two computers, both attached to the hub (DSL
> modem also attached to the hub).  Does anybody know whether this can be
> done, and if so, generally what the strategy is?  Can I avoid installing
> OS/2 Peer (which seems painful, and doesn't yield any additional
> benefits that I can see)?  TIA

You will have to insall some gateway software (like Injoy Gateway)
on one of the computers. The other machine will have to be assigned
a private IP address and it's access to the internet must be
routed to the machine with the gateway software.

Injoy's documentation describes how to do this.

URL http://www.fx.dk

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  11-Dec-99 12:59:04
  To: All                                               11-Dec-99 16:33:29
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: Robert Holmgren <holmgren@idt.net>


Lorne Sunley wrote:
> 
> On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net>
> wrote:
> 
> > I have a 5 port hub and a static IP ADSL connection.  I'd like to share
> > the connection between two computers...  Does anybody know whether this
can be
> > done, and if so, generally what the strategy is?...
> 
> You will have to install some gateway software (like Injoy Gateway)
> on one of the computers.

Is there any decent freeware gateway software -- or is Injoy the
consensus/quality choice?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           11-Dec-99 18:44:06
  To: All                                               11-Dec-99 16:33:29
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Sat, 11 Dec 1999 17:59:08, Robert Holmgren <holmgren@idt.net> 
wrote:

> 
> 
> Lorne Sunley wrote:
> > 
> > On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net>
> > wrote:
> > 
> > > I have a 5 port hub and a static IP ADSL connection.  I'd like to share
> > > the connection between two computers...  Does anybody know whether this
can be
> > > done, and if so, generally what the strategy is?...
> > 
> > You will have to install some gateway software (like Injoy Gateway)
> > on one of the computers.
> 
> Is there any decent freeware gateway software -- or is Injoy the
> consensus/quality choice?

The WR8610 stack update provides the drivers for NAT
and VPN. The only "gotcha" is the fact that the NAT requires
a "real" IP address for each "internal" IP address that
has access to the internet. Plus the fact that the documentation
does not mention how to configure the NAT capability. There
is an IBM Redbook for AIX that does document it though.

Injoy is a good solid product for a gateway. There are
some issues concerning the firewall that have been
voiced by others on USENET. When the firewall
is not running the "real" IP address in the machine 
still responds to any and all TCP/IP packets.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: rgehrig@primenet.com                              11-Dec-99 13:25:19
  To: All                                               11-Dec-99 19:49:07
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: "Robert Gehrig" <rgehrig@primenet.com>

On Sat, 11 Dec 1999 04:44:39 -0500, Robert Holmgren wrote:

>I have a 5 port hub and a static IP ADSL connection.  I'd like to share
>the connection between two computers, both attached to the hub (DSL
>modem also attached to the hub).  Does anybody know whether this can be
>done, and if so, generally what the strategy is?  Can I avoid installing
>OS/2 Peer (which seems painful, and doesn't yield any additional
>benefits that I can see)?  TIA

What is your ADSL Unit. If it is a Cisco 675 it is very easy.

You can use the DHCP server in the Cisco unit.

e-mail me at robert.gehrig@mail.gdbarri.com.

I will also put up here on the discussion.


Robert Gehrig
rgehrig@primenet.com

Brought to you by the letters O and S and the number 2



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Frontier GlobalCenter Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: operagost@e-mail.com                              11-Dec-99 22:12:17
  To: All                                               11-Dec-99 19:49:08
Subj: Re: Networking a HP LaserJet4...

From: "Stephen Eickhoff (remove the - to reply)" <operagost@e-mail.com>

You can configure printers from any browser using WebJetAdmin. However, you
escape the fact that will probably need a really powerful server running
Windows NT to host it.

By the way, I saw some comments in this thread about DLC. You can use DLC to
print to JetDirects, but you must add the 802.2 protocol in MPTS to do so. I
recommend against it on either OS/2 or Windows NT. Instead, on NT install
TCP/IP Printing support and set up an LPD port. Use "raw" as the service name.
With OS/2, I've found it easiest to use JetAdmin and enable only TCP/IP. Then
I go into printer properties and add a new HP Network port for that printer.

James Moe wrote:
> 
> "Dave {Reply Address in.sig}" wrote:
> >
> > >>
> > >  As I recall, HP is discontinuing ALL versions of JetAdmin, not just
> > >os/2. The replacement is WebJetAdmin.
> > >
> > Which is not supported in an OS/2-only version as far as I can tell,
> > you need the NT server stuff.
> >
>   I have WebJetAdmon running on my computer at work which is os/2.
> 
> --
> 
> sma at rtd dot com
> Remove ".spam-not" for email

-- 
----------------------------------
         Stephen Eickhoff
          Havertown, PA
----------------------------------

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  11-Dec-99 16:18:26
  To: All                                               11-Dec-99 19:49:08
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: Robert Holmgren <holmgren@idt.net>


Lorne Sunley wrote:
> 
> On Sat, 11 Dec 1999 17:59:08, Robert Holmgren <holmgren@idt.net>
> wrote:
> 
> >
> >
> > Lorne Sunley wrote:
> > >
> > > On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net>
> > > wrote:
> > >
> > > > I have a 5 port hub and a static IP ADSL connection.  I'd like to
share
> > > > the connection between two computers...  Does anybody know whether
this can be
> > > > done, and if so, generally what the strategy is?...
> > >
> > > You will have to install some gateway software (like Injoy Gateway)
> > > on one of the computers.
> >
> > Is there any decent freeware gateway software -- or is Injoy the
> > consensus/quality choice?
> 
> The only "gotcha" is the fact that the NAT requires
> a "real" IP address for each "internal" IP address that
> has access to the internet.

Are you saying that NAT requires a *separate* "real" IP address for each
internal IP address -- in other words, if you have two machines, you
need two static IP addresses?  If not, then I guess I don't understand
what the "gotcha" really is.

Also, the Injoy docs (well, introductory blurbs actually) at their site
suggest that you need to be running a LAN already to connect separate
workstations to a single external IP connection.  Are they saying that I
need to have IBM Peer or a server-client relationship established before
their gateway/firewall combo will work?

In the abstract, it seems that it might just be easier to obtain a
second IP address.  (Although I do need a firewall.  Hmmmm...)

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  11-Dec-99 16:29:04
  To: All                                               11-Dec-99 19:49:08
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: Robert Holmgren <holmgren@idt.net>


Robert Gehrig wrote:
> 
> On Sat, 11 Dec 1999 04:44:39 -0500, Robert Holmgren wrote:
> 
> >I have a 5 port hub and a static IP ADSL connection.  I'd like to share
> >the connection between two computers, both attached to the hub (DSL
> >modem also attached to the hub).  Does anybody know whether this can be
> >done, and if so, generally what the strategy is?  Can I avoid installing
> >OS/2 Peer (which seems painful, and doesn't yield any additional
> >benefits that I can see)?  TIA
> 
> What is your ADSL Unit. If it is a Cisco 675 it is very easy.

It's a Next Level Communications hub/router connected to a LinkSys
5-port 100/10 hub.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           11-Dec-99 22:05:24
  To: All                                               11-Dec-99 19:49:08
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Sat, 11 Dec 1999 21:18:52, Robert Holmgren <holmgren@idt.net> 
wrote:

> 
> 
> Lorne Sunley wrote:
> > 
> > On Sat, 11 Dec 1999 17:59:08, Robert Holmgren <holmgren@idt.net>
> > wrote:
> > 
> > >
> > >
> > > Lorne Sunley wrote:
> > > >
> > > > On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net>
> > > > wrote:
> > > >
> > > > > I have a 5 port hub and a static IP ADSL connection.  I'd like to
share
> > > > > the connection between two computers...  Does anybody know whether
this can be
> > > > > done, and if so, generally what the strategy is?...
> > > >
> > > > You will have to install some gateway software (like Injoy Gateway)
> > > > on one of the computers.
> > >
> > > Is there any decent freeware gateway software -- or is Injoy the
> > > consensus/quality choice?
> > 
> > The only "gotcha" is the fact that the NAT requires
> > a "real" IP address for each "internal" IP address that
> > has access to the internet.
> 
> Are you saying that NAT requires a *separate* "real" IP address for each
> internal IP address -- in other words, if you have two machines, you
> need two static IP addresses?  If not, then I guess I don't understand
> what the "gotcha" really is.

The Injoy Gateway program will do Address Translation from
any number (well, up to the licence limit) of private IP addresses
to a single "real" IP address.

The WR8610 stack needs one "real" IP address for each
"private" IP address. This is a real PITA if you only have
one "real" IP address available to you.

> 
> Also, the Injoy docs (well, introductory blurbs actually) at their site
> suggest that you need to be running a LAN already to connect separate
> workstations to a single external IP connection.  Are they saying that I
> need to have IBM Peer or a server-client relationship established before
> their gateway/firewall combo will work?
> 

The LAN is the TCP/IP stack running on each machine that
you want to connect to the internet. The LAN can consist of
a single machine. The only network protocol you need
is TCP/IP. The IBM Peer software is not involved in
setting up the TCP/IP stacks.

> In the abstract, it seems that it might just be easier to obtain a
> second IP address.  (Although I do need a firewall.  Hmmmm...)

If it is easier to obtain a second IP address that will work
as well. If you have a "real" IP address for each machine
you can use the firewall code built into the WR8610 stack.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: wsrue@BellAtlantic.net                            11-Dec-99 23:03:13
  To: All                                               11-Dec-99 19:49:08
Subj: Re: DSL Not Always On

From: "Walter S. Rue" <wsrue@BellAtlantic.net>

My original statement that BellAtlantic recognized only M$ Windows
clients was incomplete.  They also support certain Apple Mac clients. 
The software comes from iVasion, who is otherwise unknown to me.

But my surprise at the OS restriction leads me to wonder if a "bait and
switch" game is afoot.  None of the prominent announcements, promotions
or FAQs I could find at www.bellatlantic.com/infospeed mentioned OS
requirements.  Not even PPP was identified.  Maybe the silence was
simply because their first round of DSL service used static IP addresses
and they hadn't got round to updating the material.  But when asked to
confirm their RFC support, they had nothing to say.  Instead, they
referred me to iVasion, who replied only with a couple of Linux sites
dealing with PPP issues, perhaps trying to imply something.  Responding
to a direct question later, I finally heard one technical rep admit that
PPPoE was the protocol.  I guess I am not sure they were obfuscating
deliberately.  But some of this was clearly unprofessional and
amaturish.  Maybe M$ played a role too -- who knows!

Eventually, I found a technical rep who claimed familiarity with Linux
and, in response to an e-mail, heard from another claiming familiarity
with OS/2.  The latter assured me that connection was possible but did
not say how.  Later, after I was up and running, the rep on the phone
during the initial connection test was originally skeptical but
afterward invited me to send a description so they would have something
for future OS/2 users.


"Walter S. Rue" wrote:
> 
> Maybe I was imagining it, but I was sure that the BellAtlantic rep I
> spoke with about their DSL service said that OS/2 was supported.  In the
> install kit they sent, the CD with only Win software on it was the first
> ominous sign, then the instruction booklets with only Win related
> instructions in it, finally the voiced denial by their reps when I
> phoned back to confirm.
> 
> They require a special signon after the TCP/IP (DHCP) connection using
> proprietary software from IVasion named PoET, to be repeated at the
> beginning of each session (even though the line is non-switched).
> IVasion products are exclusively Win9x & NT.  No static IP options.  So
> much for "always on".
> 
> Might this signon after all be a standardized process available in the
> likes of InJoy?  Has anyone else worked around a similar problem?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: wsrue@BellAtlantic.net                            12-Dec-99 00:23:05
  To: All                                               11-Dec-99 21:20:14
Subj: Re: DSL Not Always On

From: "Walter S. Rue" <wsrue@BellAtlantic.net>

After finally determining that PPPoE was the required protocol, "up and
running" became rather simple.  Some details might be of use.

The BellAtlantic DSL service in my area (north of Boston) is branded as
"Infospeed DSL", URL www.bellatlantic.com/infospeed.  By the way, this
was NYNEX until the recent merger, and the "Infospeed" DSL incarnation
may have been of NYNEX origin.  In addition to the data line, it
features simultaneous voice, so we retain our original phone number and
voice service.  I chose the 640kb speed for price reasons, but two
higher speeds are also available.  Instead of the static IP address I
expected (and which Mr. Glass apparently has), they use PPPoE for its
connect & disconnect functions, even though the line itself is
electrically nonswitched.  BA explained that with static addresses
Windows' Network Neighborhood somehow showed all of them together,
making them equally accessible (maybe firewalls are only for those in
the know).  So PPPoE with its connection control was their response.

From Mr. Thacker's suggestion, I downloaded Link Guard Solution's
Safefire PPP over Ethernet (SFPPP).  After clearing up questions about
which (sample) CFG files to use and which path they should be in, and
also about dissociating TCP/IP from the ethernet card, it simply worked
and continues to work.  It is true after all: this DSL is (nearly)
always on!  I should add that LGS technical support was very responsive
and knowledgable.  But one thing the iVasion clients do that SFPPP
doesn't is the one-time account setup -- establishing the userid/mailid
& password and selecting a mail server.  So BA did that for me over the
phone.  The resulting uid/pw, of course, are copied into the CFG.

Apart from the OS & protocol obfuscations, the other thing I dislike is
the requirement to change ISP.  BA states that other ISP choices may be
available later, without saying when.  But later is too late.  I could
keep ATTGlobal for e-mail only, of course, but the duplicate expense and
the repeated switching from DSL to dial-up and back would be a big
nuisance.  So, except for the unlikely event that ATT makes an ISP deal
with BA within the next few days, I'm out.  It seems that at least
e-mail continuity may be a thing of the past.

-Walter


"Walter S. Rue" wrote:
> 
> Maybe I was imagining it, but I was sure that the BellAtlantic rep I
> spoke with about their DSL service said that OS/2 was supported.  In the
> install kit they sent, the CD with only Win software on it was the first
> ominous sign, then the instruction booklets with only Win related
> instructions in it, finally the voiced denial by their reps when I
> phoned back to confirm.
> 
> They require a special signon after the TCP/IP (DHCP) connection using
> proprietary software from IVasion named PoET, to be repeated at the
> beginning of each session (even though the line is non-switched).
> IVasion products are exclusively Win9x & NT.  No static IP options.  So
> much for "always on".
> 
> Might this signon after all be a standardized process available in the
> likes of InJoy?  Has anyone else worked around a similar problem?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: prmlaw@bellatlantic.net                           12-Dec-99 01:53:29
  To: All                                               12-Dec-99 02:24:03
Subj: Re: DSL Not Always On

From: "Philip R. Mann" <prmlaw@bellatlantic.net>

On Sun, 12 Dec 1999 00:23:10 GMT, Walter S. Rue wrote:

>I could keep ATTGlobal for e-mail only, of course, but the duplicate expense
and
>the repeated switching from DSL to dial-up and back would be a big
>nuisance. 

ATTGlobal mail can be downloaded from BellAtlantic.Net and vice-versa.

Until BellAtlantic.Net establishes a better dialup system (its only
available from Va to NJ), you'll probably want to keep a nationwide ISP as
backup anyhow.

----- PRM -----


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: nospam_n.saxon@mindspring.com                     11-Dec-99 21:39:07
  To: All                                               12-Dec-99 02:24:03
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: "Nick Saxon" <nospam_n.saxon@mindspring.com>

On Sat, 11 Dec 1999 04:44:39 -0500, Robert Holmgren wrote:

>I have a 5 port hub and a static IP ADSL connection.  I'd like to share
>the connection between two computers, both attached to the hub (DSL
>modem also attached to the hub).  Does anybody know whether this can be
>done, and if so, generally what the strategy is?  Can I avoid installing
>OS/2 Peer (which seems painful, and doesn't yield any additional
>benefits that I can see)?  TIA

Check the ADSL modem capabilities. Chances are that it can do it on its own.
I'm a happy user of Alcatel 1000 ADSL. It is a small router and has a room
for 5 
ARP entries.

What it means to me is that I can have up to 5  PCs at home configured to
have the ADSL
as a default router without need of any additional software.

Nich Saxon


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Golde Code Development (1:109/42)

+----------------------------------------------------------------------------+

From: windows.from.your.harddisk.arnol...               12-Dec-99 11:58:04
  To: All                                               12-Dec-99 10:13:27
Subj: Checkpoint firewall support under OS/2 ?

Message sender: windows.from.your.harddisk.arnoldvanovereem@iname.com

From: windows.from.your.harddisk.arnoldvanovereem@iname.com (Arnold van
Overeem)

My employer installed a checkpoint firewall-1 and requires me to use 
Securemote to access the intranet. Anyone who knows he to achieve this with 
OS/2 ?
I'm using Warp 4 with ISDN-card and ISDNPM, which worked fine until recently 
(and still works on the open internet).
On the checkpoint site I didn't find any clue that they know about the 
existence of OS/2.

remove windows from your harddisk to reply
==========================================
Arnold van Overeem
==========================================
Let's make the difference/2

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: UUNET-NL (http://www.nl.uu.net) (1:109/42)

+----------------------------------------------------------------------------+

From: 72764.2166@csi.com                                12-Dec-99 12:59:20
  To: All                                               12-Dec-99 19:56:11
Subj: Re: Connecting to a Linux server

From: "Barry" <72764.2166@csi.com>

Lorne,

I was reading thru some messages here and on Compuserve and I added something
that solved the problem.  What I did was add to DHCPD.CFG file the following:

option 12  <hostname>

with <hostname> being my actual hostname with no quotes.  Why this solved the
problem I'm not sure.  How one could know this without lucking out by reading
it I'm not sure either.

Barry


On Sat, 11 Dec 1999 05:59:08 GMT, Lorne Sunley wrote:

>On Sat, 11 Dec 1999 05:42:33, "Barry" <72764.2166@csi.com> wrote:
>
>> Lorne,
>> 
>> I just downloaded and installed WR8610, but got the same results.  I also
>> noticed there is a WR8620, should I apply that fix or is it buggy?
>> 
>
><snip>
>
>You might as well. That one is updated with the same
>tool you use to apply the regular OS fixpacks. So you 
>will need the CSF 1.41 fixtool.
>
>--
>
>Lorne Sunley
>



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MindSpring Enterprises (1:109/42)

+----------------------------------------------------------------------------+

From: donnelly@tampabay.rr.com                          12-Dec-99 22:18:22
  To: All                                               12-Dec-99 19:56:11
Subj: Re: Join Prominent Doctor In No Risk Online Business  1462

From: donnelly@tampabay.rr.com (Buddy Donnelly)

On Sun, 12 Dec 1999 19:05:57, juptry@auto.myfreeoffice.com wrote:

> Join our online no risk discount catalog business with great products right
from factory, including some medical breakthroughs and get our free lead
generating apparatus!  Excellent support. Will teach you how to do this part
time from home and make serious money. Call 1-800-933-3508 or email to
ilikemoney@auto.myfreeoffice.com
> wzvqjkhpbskgkkliwvqiimkjkwlqqlgzibs
> 

And may the Malpractice Suit With Punitive Damages Gods visit this 
"doctor" real soon...

-- 

Good luck,

Buddy

Buddy Donnelly
donnelly@tampabay.rr.com


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RoadRunner - TampaBay (1:109/42)

+----------------------------------------------------------------------------+

From: carlking@healthquestnutrition.com                 12-Dec-99 19:22:00
  To: All                                               12-Dec-99 21:19:04
Subj: Re: NT client for Warp Server

From: Carl King <carlking@healthquestnutrition.com>

I seem to remember seeing it at the software choice site or try
www.software.ibm.com/os/warp and follow the download links.

laniear@pacificnet.net wrote:

> Last year I setup an NT system and I wanted to be able to logon to my
> server.  I donwloaded the NT client from some page at IBM.  I'm using
> the NT machine again and I can't find the client anywhere.  Anyone know
> where I can find it again?
>
> BTW, if there a Linux client also?
>
> Thanks in advance,
>
> Lee



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Smart (1:109/42)

+----------------------------------------------------------------------------+

From: oad@it.hkbank.com                                 13-Dec-99 10:07:08
  To: All                                               13-Dec-99 03:31:20
Subj: WordPerfect 6.0 Invalid Filename

From: "oad" <oad@it.hkbank.com>

Why WordPerfect6.0 filename will have a @XXX in the beginning characters?
The software is on OS/2 platform, installed at LAN server running Netware.





--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: IMS Netvigator (1:109/42)

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              13-Dec-99 02:01:05
  To: All                                               13-Dec-99 03:31:20
Subj: Re: Networking a HP LaserJet4...

From: James Moe <sma.spam-not@rtd.com>


"Stephen Eickhoff (remove the - to reply)" wrote:
> 
> You can configure printers from any browser using WebJetAdmin. However, you
> escape the fact that will probably need a really powerful server running
> Windows NT to host it.
> 
   My pentium1/90 is hosting the WebJetAdmin service. I.e., it is
running the HTTP server for WebJetAdmin. I connect to myself to
configure a printer.
   It is rather slow...

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  12-Dec-99 21:18:27
  To: All                                               13-Dec-99 03:31:20
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: Robert Holmgren <holmgren@idt.net>


Nick Saxon wrote:
> 
> On Sat, 11 Dec 1999 04:44:39 -0500, Robert Holmgren wrote:
> 
> >I have a 5 port hub and a static IP ADSL connection.  I'd like to share
> >the connection between two computers, both attached to the hub (DSL
> >modem also attached to the hub).  Does anybody know whether this can be
> >done, and if so, generally what the strategy is?  Can I avoid installing
> >OS/2 Peer (which seems painful, and doesn't yield any additional
> >benefits that I can see)?  TIA
> 
> Check the ADSL modem capabilities. Chances are that it can do it on its own.
> I'm a happy user of Alcatel 1000 ADSL. It is a small router and has a room
> for 5
> ARP entries.
> 
> What it means to me is that I can have up to 5  PCs at home configured to
> have the ADSL
> as a default router without need of any additional software.

Lucky you!  The Next Level modem is billed as a "modem/router", but I
see nothing in the literature (or at their site) to indicate how to use
the router capabilities (if they're really there).  Nothing about how to
program it or store ARP entries.  Sh!t!  No spec sheet, and DOCs written
for morons (as seems increasingly to be the case in the MS Era:  even
when you don't understand a subject, if they at least discuss it at a
high level, you learn).

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  12-Dec-99 22:01:11
  To: All                                               13-Dec-99 03:31:20
Subj: Re: Can one static (ADSL) IP be shared by two computers without    sett

From: Robert Holmgren <holmgren@idt.net>

Lorne Sunley wrote:
> 
> On Sat, 11 Dec 1999 21:18:52, Robert Holmgren <holmgren@idt.net>
> wrote:
> 
> >
> >
> > Lorne Sunley wrote:
> > >
> > > On Sat, 11 Dec 1999 17:59:08, Robert Holmgren <holmgren@idt.net>
> > > wrote:
> > >
> > > >
> > > >
> > > > Lorne Sunley wrote:
> > > > >
> > > > > On Sat, 11 Dec 1999 09:44:39, Robert Holmgren <holmgren@idt.net>
> > > > > wrote:
> > > > >
> > > > > > I have a 5 port hub and a static IP ADSL connection.  I'd like to
share
> > > > > > the connection between two computers...  Does anybody know whether 
this can be
> > > > > > done, and if so, generally what the strategy is?...
> > > > >
> > > > > You will have to install some gateway software (like Injoy Gateway)
> > > > > on one of the computers.
> > > >
> > > > Is there any decent freeware gateway software -- or is Injoy the
> > > > consensus/quality choice?
> > >
> > > The only "gotcha" is the fact that the NAT requires
> > > a "real" IP address for each "internal" IP address that
> > > has access to the internet.
> >
> > Are you saying that NAT requires a *separate* "real" IP address for each
> > internal IP address -- in other words, if you have two machines, you
> > need two static IP addresses?  If not, then I guess I don't understand
> > what the "gotcha" really is.
> 
> The Injoy Gateway program will do Address Translation from
> any number (well, up to the licence limit) of private IP addresses
> to a single "real" IP address.
> 
> The WR8610 stack needs one "real" IP address for each
> "private" IP address. This is a real PITA if you only have
> one "real" IP address available to you.

So, to be clear:  the answer is, you need two real (not local) IP
addresses for two machines -- yes or no?
 
> > Also, the Injoy docs (well, introductory blurbs actually) at their site
> > suggest that you need to be running a LAN already to connect separate
> > workstations to a single external IP connection.  Are they saying that I
> > need to have IBM Peer or a server-client relationship established before
> > their gateway/firewall combo will work?
 
> The LAN is the TCP/IP stack running on each machine that
> you want to connect to the internet. The LAN can consist of
> a single machine. The only network protocol you need
> is TCP/IP. The IBM Peer software is not involved in
> setting up the TCP/IP stacks.

Got it.  That's what I assumed and wanted to confirm.  I'm running
WR08620, i.e. the TCP/IP v4.1 that IBM graciously err umm made freely
available on Software Choice for about four whole days last year, plus
the latest fixes (which bumps it to v4.2 or 4.3 level, I think).

> > In the abstract, it seems that it might just be easier to obtain a
> > second IP address.  (Although I do need a firewall.  Hmmmm...)
 
> If it is easier to obtain a second IP address that will work
> as well. If you have a "real" IP address for each machine
> you can use the firewall code built into the WR8610 stack.

If I understand you, there's *no alternative* to a second "real" IP
address -- that's the "gotcha" of the OS/2 stack that you're talking
about, isn't it?  I mean, my limited understanding (at this point) is,
that the only viable alternative is to set up a full-fledged
server-client network.

Much obliged for these clarifications, Lorne, and sorry to labor it --
but none of this is intuitive or obvious if you've never dealt with a
network before.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: holmgren@idt.net                                  12-Dec-99 22:10:21
  To: All                                               13-Dec-99 03:31:20
Subj: Re: Can one static (ADSL) IP be shared by two computers without    sett

From: Robert Holmgren <holmgren@idt.net>


Lorne Sunley wrote:

> If it is easier to obtain a second IP address that will work
> as well. If you have a "real" IP address for each machine
> you can use the firewall code built into the WR8610 stack.

I took a look at that on the Russian Underground site a few days back,
also at the Zampa front-end.  Daunting!  Is there a faq anywhere that
explains setting up *rules*, i.e. "permit this type of packet, deny that
kind of packet, and you'll be protected", etc?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: hemo_jr@attglobal.net                             13-Dec-99 08:55:14
  To: All                                               13-Dec-99 14:27:00
Subj: Re: NT client for Warp Server

From: hemo_jr@attglobal.net (Matt Hickman)

In <38543C28.AECF0D3A@healthquestnutrition.com>, on 12/12/99 
   at 07:22 PM, Carl King <carlking@healthquestnutrition.com> said:

>I seem to remember seeing it at the software choice site or try
>www.software.ibm.com/os/warp and follow the download links.

>laniear@pacificnet.net wrote:

>> Last year I setup an NT system and I wanted to be able to logon to my
>> server.  I donwloaded the NT client from some page at IBM.  I'm using
>> the NT machine again and I can't find the client anywhere.  Anyone know
>> where I can find it again?
>>
>> BTW, if there a Linux client also?

You might try Samba for Linux as a client.

-- 
Matt Hickman    
     No news, he thought but a dull breakfast.
                           - Robert A. Heinlein (1907-1988)
                            _Beyond this Horizon_ (c. 1942)


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: m.o.davis@gte.net                                 13-Dec-99 16:16:11
  To: All                                               13-Dec-99 14:27:00
Subj: NIC going to sleep?

From: m.o.davis@gte.net (Mark Davis)

I have a home LAN with a mix of machines. We use a Linux box attached to a DSL
modem as our internet gateway. The other machines run Warp 4 or Win95/98 and
use tcpip and NETBIOS/NETBEUI. Samba is not loaded on the Linux box. My
problem is with my main machine running Warp 4. For about the past month or
so, the connection LED on the hub will go out. When that happens, I lose all
connections with the LAN and, naturally, with the internet. I can go to
another machine and ping the problem machine and it will "wake up" but I
cannot wake it up from the problem machine. The NIC is a 3com 3c595 Fast
Etherlink. Two other machines on the network have the same card but don't
exhibit the same symptoms, though one loses connection without losing the LED;
I can refresh its connection by unplugging the patch cable from the wall plate
and plugging it back in.

Does this sound like a hardware problem? Thanks for any suggestions.

Mark Davis
San Angelo, TX

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: miket@interact.net.au                             14-Dec-99 10:17:17
  To: All                                               13-Dec-99 21:12:03
Subj: Installing WSEB as a client?

From: Michael Taylor <miket@interact.net.au>

What is the best way to install WSeB as a client?

I have OS/2 V4 installed in a network with NT Servers. It is not a 
real Domain but more a Workgroup based network.

My C: drive is shared and I need access to the shares on other 
computers around the office.

I have experimented installing WSeB at home (two PCs - OS/2 and Win98)
and have not managed to get the Win98 PC to attach to WSeB.
It wants a pasword to connect to the IPC$ share and I don't know
how to set it!

Should I install WSeB as an additional server in the network? 
Would installing the Warp4 Peer software be a good idea rather than
the WSeB Print and File client?

We are upgrading the office PCs to SMP - does this have a bearing on 
the way I do the install/upgrade?

Current PC is 
OS/2 V4 + FP11
Matrox Productiva G100 - 2.36 drivers
S3 9C805 100MB network card.


-- 
Regards,
Mick

Michael Taylor
Senior Technical Specialist
Search Software America
PO Box 22, Braddon
Canberra, ACT 2612, Australia

Michael_Taylor@searchsoftware.com
http://www.searchsoftware.com

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: InterACT Technology Group http://www.interact.net
(1:109/42)

+----------------------------------------------------------------------------+

From: jimburke@ionet.net                                14-Dec-99 05:24:25
  To: All                                               14-Dec-99 03:29:06
Subj: No tcpip drivers for an older NIC?

From: jimburke@ionet.net (Jim Burke)

I have an EISA Nic made by Hewlett-Packard and I'm about to conclude that
there are no tcpip drivers written
for this particular card. (HP EISA LAN Adapter/32 272248-13411 --

Here is a directory listing of the support disk -- looking for *os2*

 Volume in drive A is LAN_DRV_424
 Volume Serial Number is 1431-13E1

Directory of A:\

MSLANMAN OS2   <DIR>        10-15-93  1:11p MSLANMAN.OS2
         0 file(s)              0 bytes

Directory of A:\MSLANMAN.OS2

README   OS2         5,214  11-23-92  4:20p README.OS2
         1 file(s)          5,214 bytes

Directory of A:\MSLANMAN.OS2\DRIVERS\ETHERNET\HPLANE

HPLANE   OS2        16,780  08-25-92  8:56a HPLANE.OS2
         1 file(s)         16,780 bytes

Directory of A:\NDIS

OS2            <DIR>        10-15-93  1:11p OS2
         0 file(s)              0 bytes

Directory of A:\NDIS\OS2

HPLANE   OS2        16,780  08-25-92  8:56a HPLANE.OS2
         1 file(s)         16,780 bytes

Directory of A:\NETWARE.386

OS2      ODI   <DIR>        10-15-93  1:10p OS2.ODI
         0 file(s)              0 bytes

Total files listed:
         3 file(s)         38,774 bytes
         3 dir(s)         698,368 bytes free

I set up a tcpip protocol for this NIC, but if I telnet to the machine or ping 
it, it crashes.
I can see the computer on the lan but probably only through the netbios
protocol. 

If there isn't a driver written for this card, is there a chance that another
driver might work?


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: ioNET Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: timurkz@saxz.mmbankz.ruz                          14-Dec-99 11:21:07
  To: All                                               14-Dec-99 11:41:16
Subj: Re: No tcpip drivers for an older NIC?

From: "Timur Kazimirov" <timurkz@saxz.mmbankz.ruz>

Hello Jim,

On Tue, 14 Dec 1999 05:24:50 GMT, Jim Burke wrote:

>I have an EISA Nic made by Hewlett-Packard and I'm about to conclude that
there are no tcpip drivers written
>for this particular card. (HP EISA LAN Adapter/32 272248-13411 --

OS/2 uses NDIS drivers for all protocols. There are no tcpip NIC drivers for
OS/2 at all.
MPTS (MultiProtocol Transport Service) is responsible for using one NDIS
driver with
as many network protocols as you would like to use, and it can support.

There is another way, of course (using ODI drivers instead of NDIS), but this
is another story...

>Directory of A:\NDIS\OS2
>
>HPLANE   OS2        16,780  08-25-92  8:56a HPLANE.OS2

This is the exactly what you need!!! This is NDIS driver for OS/2

>I set up a tcpip protocol for this NIC, but if I telnet to the machine or
ping it, it crashes.
>I can see the computer on the lan but probably only through the netbios
protocol. 

It seems to me that you have improperly configured TCP/IP stack on your
machine.
Couldn't you post following files to analyze problem:

X:\CONFIG.SYS
X:\IBMCOM\PROTOCOL.INI
X:\MPTN\BIN\SETUP.CMD

With best regards,
Timur Kazimirov

-- Remove all "z" from my address to reply



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Bank of Moscow, Sakhalin Branch (1:109/42)

+----------------------------------------------------------------------------+

From: tvshow@attglobal.net                              14-Dec-99 17:11:22
  To: All                                               14-Dec-99 11:41:17
Subj: Proxy for Mac-Help!!!

From: "@" <tvshow@attglobal.net>

I am running windows NT server as my proxy server. I need to solve various
NT-OS2 problems like how do i get proxy client for Mac OS2 to access my MS
proxy server. If you can help write:

tvshow@attglobal.net

Peace,

Razman.


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: mgreene@exis.net                                  14-Dec-99 07:57:07
  To: All                                               14-Dec-99 11:41:17
Subj: Re: No tcpip drivers for an older NIC?

From: "Michael K Greene" <mgreene@exis.net>

On Tue, 14 Dec 1999 05:24:50 GMT, Jim Burke wrote:

This is a long shot but you could run os2sniff.exe that comes with a version
of MPTS. This might tell you????



Michael K Greene <mgreene@exis.net>     |      OS/2 Warp / Linux / Win95-311



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Exis Net Inc (1:109/42)

+----------------------------------------------------------------------------+

From: jimburke@ionet.net                                14-Dec-99 13:38:03
  To: All                                               14-Dec-99 14:35:14
Subj: Re: No tcpip drivers for an older NIC?  long

From: jimburke@ionet.net (Jim Burke)

protocol.ini

[PROT_MAN]

   DRIVERNAME = PROTMAN$

[IBMLXCFG]

   netbeui_nif = netbeui.nif
   tcpbeui_nif = tcpbeui.nif
   tcpip_nif = tcpip.nif
   HPLANE_nif = HPLANE.nif

[NETBIOS]

   DriverName = netbios$
   ADAPTER0 = netbeui$,0
   ADAPTER1 = tcpbeui$,1

[netbeui_nif]

   DriverName = netbeui$
   Bindings = HPLANE_nif
   NETADDRESS = " 080009697c71"
   ETHERAND_TYPE = "I"
   USEADDRREV = "YES"
   OS2TRACEMASK = 0x0
   SESSIONS = 130
   NCBS = 225
   NAMES = 21
   SELECTORS = 50
   USEMAXDATAGRAM = "YES"
   ADAPTRATE = 1000
   WINDOWERRORS = 0
   MAXDATARCV = 4168
   TI = 30000
   T1 = 1000
   T2 = 200
   MAXIN = 1
   MAXOUT = 1
   NETBIOSTIMEOUT = 500
   NETBIOSRETRIES = 3
   NAMECACHE = 1000
   RNDOPTION = 1
   PIGGYBACKACKS = 1
   DATAGRAMPACKETS = 50
   PACKETS = 300
   LOOPPACKETS = 8
   PIPELINE = 5
   MAXTRANSMITS = 6
   MINTRANSMITS = 2
   DLCRETRIES = 10
   FCPRIORITY = 5
   NETFLAGS = 0x0

[tcpbeui_nif]

   DriverName = tcpbeui$
   Bindings = ,HPLANE_nif
   NODETYPE = "B-Node"
   SLIP = "YES"
   NBNSADDR = "192.168.1.7"
   NBNSBACKADDR = "192.168.1.5"
   NBDDADDR = "192.168.1.7"
   NBDDBACKADDR = "192.168.1.5"
   OS2TRACEMASK = 0x0
   SESSIONS = 130
   NCBS = 225
   NAMES = 21
   SELECTORS = 15
   USEMAXDATAGRAM = "NO"
   NETBIOSTIMEOUT = 500
   NETBIOSRETRIES = 2
   NAMECACHE = 1000
   PRELOADCACHE = "NO"
   NAMESFILE = 4
   DATAGRAMPACKETS = 20
   PACKETS = 50
   DOMAINSCOPE = "ionet.net"
   LOCALSCOPE = "burke"
   INTERFACERATE = 300

[tcpip_nif]

   DriverName = TCPIP$
   Bindings = ,,HPLANE_nif
   IfType = ,,23

[HPLANE_nif]

   DriverName = HPLANE$
   AdapterSlot = 1

Config.sys

SET COPYFROMFLOPPY=1
IFS=C:\OS2\HPFS.IFS /CACHE:1024 /CRECL:4 /AUTOCHECK:CG
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS,WARPCENTER
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=G:\PENos2\DLL;G:\PENos2\TEXTBOX;G:\PENos2\GESTURE;C:\NETSCAPE\PROGRAM;C
:\IBMLAN\NETLIB;C:\MUGLIB\DLL;.;C:\VT\SPCH_BIN;C:\OS2\DLL;C:\MPTN\DLL;C:\IBMCOM
\DLL;C:\IBMI18N\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\BONUSPAK\IBMWORKS;C:\BON
USPAK\RS231B;G:\JAVA11\DLL;C:\JAVAOS2\DLL;C:\IBMINST;C:\NSC\DLL;C:\TCPIP\DLL;C:
\TCPIP\PCOMOS2;C:\TCPIP\UMAIL;c:\wc1;G:\JAVA11\ICATJAVA\DLL;G:\JAVA11\ICATJAVA\
DAEMON;C:\BA2KEV
SET
PATH=C:\MPTN\BIN;C:\IBMCOM;G:\PENos2;C:\NETSCAPE\PROGRAM;C:\IBMLAN\NETPROG;C:\M
UGLIB;C:\OS2;C:\VT\SPCH_BIN;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\
;C:\OS2\MDOS;C:\OS2\APPS;C:\BonusPak\ibmworks;G:\JAVA11\BIN;C:\javaos2\bin;C:\N
SC;c:\tcpip\bin;c:\tcpip\pcomos2;C:\TCPIP\UMAIL;c:\wc1;G:\JAVA11\ICATJAVA\BIN;C
:\BA2KEV
SET
DPATH=C:\MPTN;C:\IBMCOM;G:\PENos2;G:\PENos2\DLL;G:\PENos2\INSTALL;C:\IBMLAN\NET
PROG;C:\IBMLAN;C:\MUGLIB;C:\OS2;C:\VT\SPCH_BIN;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2
;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\IBMINST;C:\NSC;C:\
TCPIP\PCOMOS2;G:\JAVA11\ICATJAVA\HELP;
SET PROMPT=$i[$p]
SET
HELP=C:\MPTN;G:\PENos2\HELP;C:\OS2\HELP;C:\VT\SPCH_RO\HELP;C:\BonusPak\askpsp\b
ooks;C:\BonusPak\ibmworks;c:\tcpip\help;C:\TCPIP\UMAIL;G:\JAVA11\ICATJAVA\HELP;

SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM /S 
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
BASEDEV=IBMKBD.SYS
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=D,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
BREAK=OFF
THREADS=1024
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET
BOOKSHELF=C:\IBMLAN\BOOK;C:\OS2\BOOK;C:\BonusPak\askpsp\books;c:\tcpip\help;c:\
wc1;
SET LOCPATH=C:\IBMI18N\LOCALE;C:\LANGUAGE\LOCALE;
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;
RUN=C:\OS2\SYSTEM\HYBERSET.EXE
SET
SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR;C:\OS2\ETC\REX
X.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
SET ULSPATH=C:\LANGUAGE;
SET LOCPATH=C:\IBMI18N\LOCALE;C:\LANGUAGE\LOCALE;
BASEDEV=TIMER0.SYS
REM SET
DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;F:\DELETE,512;G:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD /MP:(*,1) /V
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VW32S.SYS
BASEDEV=OS2SCSI.DMD
BASEDEV=AIC7870.ADD /V
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
IFS=C:\OS2\BOOT\CDFS.IFS /Q
DEVICE=C:\OS2\MDOS\VCDROM.SYS
BASEDEV=CDSEIDE.FLT
BASEDEV=IBMIDECD.FLT
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=G:\PENos2\EMI.SYS
DEVICE=G:\PENos2\EIQO2.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS SERIAL=COM1
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
SET LANG=EN_US
SET TZ=cST6cdT
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
SET IBMWORKS_INI=C:\BonusPak\ibmworks
DEVICE=C:\BonusPak\rs231b\ecrdrv.sys
DEVICE=C:\BonusPak\rs231b\rsmvdwo.sys
DEVICE=C:\MMOS2\MIDI.SYS
REM DEVICE=C:\MMOS2\VCSHDD.SYS
RUN=C:\MMOS2\QRYMMCD.EXE
CALL=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
SET NLSPATH=C:\MPTN\MSG\NLS\%N;c:\tcpip\msg\enus850\%N;
SET ETC=C:\MPTN\ETC
DEVICE=C:\MPTN\PROTOCOL\SOCKETS.SYS
DEVICE=C:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=C:\MPTN\PROTOCOL\AFINET.SYS
DEVICE=C:\MPTN\BIN\VDOSTCP.VDD
DEVICE=C:\MPTN\PROTOCOL\AFNB.SYS /S:50 /C:80 /N:2
RUN=C:\MPTN\BIN\AFNBINI.EXE
RUN=C:\MPTN\BIN\CNTRL.EXE
CALL=C:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD >NUL
RUN=C:\IBMCOM\PROTOCOL\NBTCP.EXE
RUN=C:\MPTN\BIN\VDOSCTL.EXE
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMCOM\PROTOCOL\TCPBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
SET I18NDIR=C:\IBMI18N
RUN=C:\IBMLAN\NETPROG\LSDAEMON.EXE
DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2
RUN=C:\IBMLAN\NETPROG\VNRMINIT.EXE
SET NWDBPATH=C:\IBMLAN\NETPROG
SET DLSINI=C:\IBMLAN\NETPROG\NETGUI.INI
SET INIT_FILE_NAMES=netgui
SET INIT_FILE_RANGES=200
SET WPS_COMMUNICATION=YES
SET LANINSTEP=E:\CID\IMG\IBMPEER
CALL=C:\BonusPak\rs231b\pps731b.exe
SET
INCLUDE=G:\JAVA11\INCLUDE;C:\javaos2\include;G:\JAVA11\INCLUDE\OS2;C:\javaos2\i
nclude\os2;
SET LIB=G:\JAVA11\LIB;C:\javaos2\lib;
REM *** IBM VoiceType  ***
REM SET SPCH_RUN=C:\VT\SPCH_RUN
REM SET SPCH_RO=C:\VT\SPCH_RO
REM SET SPCH_RW=C:\VT\SPCH_RW
REM SET SPCH_BIN=C:\VT\SPCH_BIN
REM SET SPCH_PATH=C:\VT\SPCH_RO\LANGS\%L\POOLS
REM SET SPCH_TRN=C:\VT\SPCH_BSF
REM SET DMIPATH=C:\DMISL\BIN
RUN=C:\OS2\SMSTART.EXE
SET
CLASSPATH=C:\javaos2\lib\jempcl10.zip;.\.;G:\JAVA11\ICATJAVA\DAEMON\JAVAPROB.ZI
P;
RUN=C:\MMOS2\MIDIDMON.EXE
SET HOSTNAME=WaltK
REM DEVICE=c:\tcpip\bin\vdostcp.sys
SWAPPATH=g:\ 28048 2048
SET TMP=c:\tcpip\tmp
REM *** WatchCat 2.1 device driver - REQUIRED
DEVICE=c:\wc1\WATCHCAT.SYS KEYB
REM *** WatchCat 2.1 main program - REQUIRED
RUN=c:\wc1\WATCHCAT.EXE
REM *** WatchCat 2.1 Process Manipluation Center Driver
REM DEVICE=c:\wc1\KILLER.SYS
REM *** WatchCat 2.1 CAD Package Virtual Device Driver
REM DEVICE=c:\wc1\VWCAT.SYS
REM *** WatchCat 2.1 CAD Package Control Program
REM RUN=c:\wc1\WCCAD.EXE
device=c:\oad\os2.sys
SET TELNET.PASSWORD.ID=mich
SET USER=ed
REM *** Environment variables used by Back Again/2
SET BA2_SET_PATH=c:\BA2PRO\SETS
SET BA2_CATALOG_PATH=c:\BA2PRO\CATALOGS
SET BA2_LOG_PATH=c:\BA2PRO\LOGS
REM *** Back Again/2 tape device manager
BASEDEV=CDSTAPE.DMD
device=c:\ba2pro\BTSSCSI.SYS

REM *** Back Again/2 ATAPI/IDE tape support
BASEDEV=BTSEIDE.FLT
DEVICE=c:\THESEUS\THESEUS5.SYS
REM RUN=C:\MPTN\BIN\VDOSTCP.VDD

SET VCFG_NO_DDC=TRUE
SET GREEXT=SDDGREXT
DEVICE=C:\OS2\SDDHELP.SYS
SET GRADD_CHAINS=C1
DEVICE=C:\OS2\GRADD.SYS
DEVICE=C:\OS2\MDOS\VMANWIN.SYS
SET C1=SDDGRADD
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
DEVICE=C:\IBMCOM\MACS\HPLANE.OS2
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
SET PENPM=G:\PENos2;
SET PEN_INKING_PRIORITY=HIGH
REM *** Back Again/2000 Tape Support
BASEDEV=CDSTAP2.DMD

setup.cmd

route -fh
ifconfig lo 127.0.0.1
ifconfig lan0 192.168.1.7 netmask 255.255.255.0
REM ifconfig lan1
REM ifconfig lan2
REM ifconfig lan3
REM ifconfig lan4
REM ifconfig lan5
REM ifconfig lan6
REM ifconfig lan7
REM ifconfig sl0
route add default 192.168.1.1 1  > null
route add net 192.168.1 192.168.1.1 1 netmask 255.255.255.0  > null
ipgate on



"Timur Kazimirov" <timurkz@saxz.mmbankz.ruz> wrote:

>Hello Jim,

>On Tue, 14 Dec 1999 05:24:50 GMT, Jim Burke wrote:

>>I have an EISA Nic made by Hewlett-Packard and I'm about to conclude that
there are no tcpip drivers written
>>for this particular card. (HP EISA LAN Adapter/32 272248-13411 --

>OS/2 uses NDIS drivers for all protocols. There are no tcpip NIC drivers for
>OS/2 at all.
>MPTS (MultiProtocol Transport Service) is responsible for using one NDIS
>driver with
>as many network protocols as you would like to use, and it can support.

>There is another way, of course (using ODI drivers instead of NDIS), but this
>is another story...

>>Directory of A:\NDIS\OS2
>>
>>HPLANE   OS2        16,780  08-25-92  8:56a HPLANE.OS2

>This is the exactly what you need!!! This is NDIS driver for OS/2

>>I set up a tcpip protocol for this NIC, but if I telnet to the machine or
ping it, it crashes.
>>I can see the computer on the lan but probably only through the netbios
protocol. 

>It seems to me that you have improperly configured TCP/IP stack on your
>machine.
>Couldn't you post following files to analyze problem:

>X:\CONFIG.SYS
>X:\IBMCOM\PROTOCOL.INI
>X:\MPTN\BIN\SETUP.CMD

>With best regards,
>Timur Kazimirov

>-- Remove all "z" from my address to reply





--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: ioNET Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: jstucklex@attglobal.net                           14-Dec-99 09:34:25
  To: All                                               14-Dec-99 14:35:14
Subj: Re: Lost lan logon

From: Jerry Stuckle <jstucklex@attglobal.net>

George,

Nope.  The userid and password are encrypted in the net.acc file - but
there's no way to decrypt it.

nospam.wxperson@pcwp.com wrote:
> 
> HI,
> 
> Is there anyway to recover the LAN logon userid and password for a
> workstation?
> 
> This is on a backup PC that has not been touched in a year and I lost
> that information.
> 
> This is for V4.0 of OS2.  Any hidden files, etc..??
> 
> Thanks,
> 
> George
> wx@pcwp.com

-- 

=======================================================
To reply, delete the "x" from my email address

Jerry Stuckle
jstucklex@attglobal.net
JDS Computer Training Corp.
Sun Certified Java Programmer
VisualAge/Java Certified Advanced Technical Expert
VisualAge/C++ Certified Developer

=======================================================

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: JDS Computer Training Corp. (1:109/42)

+----------------------------------------------------------------------------+

From: privata@gbper.ch                                  14-Dec-99 16:02:11
  To: All                                               14-Dec-99 14:35:14
Subj: How to see a shared drive from NT workstation 4

From: "BPRL" <privata@gbper.ch>

I added to my NT domain an OS/2 Warp server machine. This machine can see
the optical Disks (IBM3995) locally attached.
My whole network is Microsoft TCP-IP. I have installed TCP on OS/2 too, and
I have shared a drive.
I can't see the shared drive nor the OS/2 machine.
What have I to do? NFS ? Is there another way?


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Swisscom IP+ (post doesn't reflect views of Swiss
(1:109/42)

+----------------------------------------------------------------------------+

From: JHB@jita.nospam.demon.co.uk                       14-Dec-99 18:03:18
  To: All                                               14-Dec-99 16:42:03
Subj: tcpcoex.log question also y2k & tcp update

From: JHB@jita.nospam.demon.co.uk (Jim Backus)

While doing y2k updates to tcp/ip on a Warp 3 Connect installation, I 
noticed a file TCPCOEX.LOG.  What is the purpose of this file?  There 
are a number of entries of the form "Tcpcoex <time> <date>" followed 
by
"End Tcpcoex"

It seems that no MPTN update for y2k is needed for Warp 3 - is this 
correct?  It seems that Warp 3 is y2k compliant with a recent fix pack
(FP 32 or later), updates to tcp/ip (v30y2k.exe) and to UPM (IP08196) 
- is that the complete list?

Are there advantages to be gained through installing TCP/IP 4 or later
on a Warp Connect system?  How is it done?  I've got Warp 4 on another
PC so have access to TCP/IP 4.0.

--
Jim Backus  OS/2 - 32 bits without the bloat
bona fide replies to jimb(at)jita(dot)demon(dot)co(dot)uk
http://www.jita.demon.co.uk

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Fourmyle (1:109/42)

+----------------------------------------------------------------------------+

From: cocke@catherders.com                              14-Dec-99 13:58:24
  To: All                                               14-Dec-99 16:42:03
Subj: Netbios over tcp/ip questions

From: Michael W. Cocke <cocke@catherders.com>

This is the first time I've ever tried to set up netbios over IP, and I 
have a few questions:

I'm trying to connect from one system to another over the internet, and 
I'd like to share drives on them using warp peer.  Questions of security
aside(I already have ipsec & pluto working - thank you Bjarne!), I'm 
having problems setting it up.

I have netbios, tcp/ip, and netbios over tcp/ip configured for the 
appropriate interfaces.  I can ping from one to the other successfully. 

My questions: Is the NET USE syntax supposed to work for drive sharing 
over this link? How?  Is there a way to check if the netbios layer is 
working, other than by trying a NET USE?

Thanks!



-------------------------------------------------------------------
         Please note:  My Email and web page addresses have changed!
                The new email address is cocke@catherders.com   
                 The web page is at http://www.catherders.com

               Because network administration is like herding cats.

-------------------------------------------------------------------



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: UseNet Server, Inc.  http://www.usenetserver.com 
(1:109/42)

+----------------------------------------------------------------------------+

From: bobmcl@ibm.net                                    13-Dec-99 11:12:18
  To: All                                               14-Dec-99 19:59:12
Subj: Re: Connecting to a Linux server

From: Bob McLellan <bobmcl@ibm.net>


Lorne Sunley wrote:

> On Fri, 10 Dec 1999 05:02:54, "Barry" <72764.2166@csi.com> wrote:
>
> > I have 2 computers networked.  Computer #1 runs Red Hat Linux 6.0, 
Computer
> > #2 is a dual boot OS/2-WIN98 computer.  If I boot Computer #2 to WIN98 and
> > set it up to use either DHCP or manually entering of the IP address, I do
> > connect to the Linux box and see the shares.
> > If I boot computer #2 to OS/2 and setup TCPIP to manually enter the IP
> > address, I do connect to the Linux box and see the shares.
> > However, If I change the TCPIP settings to automatically get IP address
using
> > the Linux computer's DHCP server (and that is the only change I am
making),
> > reboot, I do NOT see the Linux box.  I know the DHCP is working okay on
the
> > OS/2 side since the DHCP monitor shows a valid lease with the correct IP
> > address (the same IP address that shows when I boot WIN98 using DHCP).  Of
> > course if I change back to manually entering the IP address, the shares
then
> > show up.  Any ideas?
> >
>
> What version of MPTS do you have installed?
>
> There are bugs in the earlier releases of MPTS and it's
> DHCP handling. If you haven't tried it yet update the
> MPTS level to WR8610.
>
> --
>
> Lorne Sunley

 Use 'netstat -r' and 'netstat -a' to inspect your routes and addresses. Are
they
OK. Also check the DHCPCD.CFG file in mptn\etc. Many people have found that
they
need to make a few modes to this before DHCP will work properly.
I have found that with WR8421 the original DHCP problems were fixed. Watch out 
for
WR8610/20, there are a few tricks to it. Check the Warp Updates page
http://www.warpupdates.de/english/warpupdates.html.
If all else fails, run a trace of the setup phase and see what shows up.
--
------------------------------------------------------
Bob McLellan
The Little Blue Kiwi
OS/2 Solutions for New Zeland


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: rainer.doering@icn.siemens.de                     14-Dec-99 23:42:04
  To: All                                               14-Dec-99 19:59:13
Subj: Re: How to see a shared drive from NT workstation 4

From: Rainer Doering <rainer.doering@icn.siemens.de>

On Tue, 14 Dec 1999 16:02:23 +0100, "BPRL" <privata@gbper.ch> wrote:

>I added to my NT domain an OS/2 Warp server machine. This machine can see
>the optical Disks (IBM3995) locally attached.
>My whole network is Microsoft TCP-IP. I have installed TCP on OS/2 too, and
>I have shared a drive.
>I can't see the shared drive nor the OS/2 machine.
>What have I to do? NFS ? Is there another way?
>
Microsoft "TCP/IP" = IBM "Netbios over TCP/IP"

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Siemens AG,(Hofmannstr)  Munich-Germany-Europe. (1:109/42)

+----------------------------------------------------------------------------+

From: hemo_jr@attglobal.net                             14-Dec-99 17:05:00
  To: All                                               14-Dec-99 21:14:07
Subj: Re: Netbios over tcp/ip questions

From: hemo_jr@attglobal.net (Matt Hickman)

In <55431294519792924379614@mike>, on 12/14/99 
   at 01:58 PM, Michael W. Cocke <cocke@catherders.com> said:

>My questions: Is the NET USE syntax supposed to work for drive sharing 
>over this link? How?  Is there a way to check if the netbios layer is 
>working, other than by trying a NET USE?

It should work if you have rfcnames.lst etc. configured.
You can do a NET VIEW to test the netbios layer.  IIRC there is also a
netbios ping somewhere (EWS?)

-- 
Matt Hickman
  ...when faced with a problem you do not understand, do any part of it
  you do understand, then look at it again.  (Prof to Manuel)
                    Robert A. Heinlein (1907 - 1988)
                    _The Moon Is a Harsh Mistress_ c 1966

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: timurkz@saxz.mmbankz.ruz                          15-Dec-99 03:01:20
  To: All                                               14-Dec-99 21:14:07
Subj: Re: No tcpip drivers for an older NIC? long

From: "Timur Kazimirov" <timurkz@saxz.mmbankz.ruz>

On Tue, 14 Dec 1999 13:38:06 GMT, Jim Burke wrote:

>protocol.ini
[...]
>   netbeui_nif = netbeui.nif
>   tcpbeui_nif = tcpbeui.nif

Well.... It seems to me, I have found the problem :-)

Try to comment these lines:

>Config.sys
[...]
>DEVICE=C:\MPTN\PROTOCOL\AFNB.SYS /S:50 /C:80 /N:2
>RUN=C:\MPTN\BIN\AFNBINI.EXE

P.S. I hope you have:

  net1 = NETBEUI$,0,LM10,100,150,14
  net2 = TCPBEUI$,1,LM10,100,150,14
  ...
  wrknets = NET1 NET2
  ...
In your IBMLAN.INI to use NetBIOS over TCP/IP with IBM Peer?


With best regards,
Timur Kazimirov

-- Remove all "z" from my address to reply



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Bank of Moscow, Sakhalin Branch (1:109/42)

+----------------------------------------------------------------------------+

From: hemo_jr@attglobal.net                             14-Dec-99 20:20:15
  To: All                                               15-Dec-99 03:46:00
Subj: Re: How to see a shared drive from NT workstation 4

From: hemo_jr@attglobal.net (Matt Hickman)

In <kMdWODo0+9kqOXZtTAM181RKLEAx@4ax.com>, on 12/14/99 
   at 11:42 PM, Rainer Doering <rainer.doering@icn.siemens.de> said:

>
>Microsoft "TCP/IP" = IBM "Netbios over TCP/IP"


AKA TCPBeui

-- 
Matt Hickman  
  The Old Man would have buried us alive if he thought there 
  was as much as a fifty-one per cent probability that it was the
  Tree of Liberty he was nourishing... We'd have done it. Any of us
  would.
                         - Robert A. Heinlein (1907-1988)
                          _The Puppet Masters_ (c 1951)
-----------------------------------------------------------

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: merlins@ibm.net                                   14-Dec-99 23:37:20
  To: All                                               15-Dec-99 03:46:00
Subj: Re: Proxy for Mac-Help!!!

From: Meinolf Sondermann <merlins@ibm.net>

Hello Razman,

"@" wrote:
> 
> I am running windows NT server as my proxy server. I need to solve various

What type of proxy ? HTTP, NNTP, Telnet, FTP, whatever ...  ?

> NT-OS2 problems like how do i get proxy client for Mac OS2 to access my MS

Wow, does your iMac run OS/2 ? Surprise, surprise .

> proxy server. If you can help write:
> 
> tvshow@attglobal.net
> 
> Peace,
> 
> Razman.

Bye/2
Meinolf

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: merlins@ibm.net                                   14-Dec-99 23:43:04
  To: All                                               15-Dec-99 03:46:00
Subj: Re: Lost lan logon

From: Meinolf Sondermann <merlins@ibm.net>


Jerry Stuckle wrote:
> 
> George,
> 
> Nope.  The userid and password are encrypted in the net.acc file - but
> there's no way to decrypt it.
> 
> nospam.wxperson@pcwp.com wrote:
> >
> > HI,
> >
> > Is there anyway to recover the LAN logon userid and password for a
> > workstation?

Copy the file NET.ACC located in \IBMLAN\INSTALL to \IBMLAN\ACCOUNTS
and Your back to installation defaults. These are USERID as your userid
and PASSWORD as your password. You now have administrative access.

Bye/2
Meinolf

> >
> > This is on a backup PC that has not been touched in a year and I lost
> > that information.
> >
> > This is for V4.0 of OS2.  Any hidden files, etc..??
> >
> > Thanks,
> >
> > George
> > wx@pcwp.com
> 
> --
> 
> =======================================================
> To reply, delete the "x" from my email address
> 
> Jerry Stuckle
> jstucklex@attglobal.net
> JDS Computer Training Corp.
> Sun Certified Java Programmer
> VisualAge/Java Certified Advanced Technical Expert
> VisualAge/C++ Certified Developer
> 
> =======================================================

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: racette@cablevision.qc.ca                         15-Dec-99 02:56:27
  To: All                                               15-Dec-99 03:46:00
Subj: DOCSIS modem ?

From: racette@cablevision.qc.ca (Martin Racette)

Hi guys,

I have to switch to DOCSIS modem, 
because my ISP, and I know from work 
that I need to run in Win98 
"WINIPCFG.EXE" to make the modem find 
the IPs it requires, but how can I do 
something like that in Warp ??????

P.S. Please can you answer through 
E-Mail as well as here

//-------------------------
Thank you in advance

Merci a l'avance

Martin

http://205.237.57.73/

ICQ #48552954

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: mgreene@exis.net                                  14-Dec-99 22:53:11
  To: All                                               15-Dec-99 03:46:01
Subj: Warp Server Advanced - Preview Disk

From: "Michael K Greene" <mgreene@exis.net>

I installed Warp Server 4 Advanced on an old 486-100, it is a preview version
I received from IBM years ago. I never used it before and I realize it is
only good for 60 days. If I play with the local security functions, in 60
days does it crap out and everything I have on it lost?

Yes, I know it is a preview version however running it next to my home
computer and doesn't quite make a production system. The only use I see I
will use it for - a cheap way to use my CDR to make OS/2 CDs. I can collect
my OS/2 files on the server and then boot to Win95 - burn the CD using Win95.



  
Michael K Greene <mgreene@exis.net>     |      OS/2 Warp / Linux / Win95-311



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Exis Net Inc (1:109/42)

+----------------------------------------------------------------------------+

From: jknott@ibm.net                                    15-Dec-99 05:47:14
  To: All                                               15-Dec-99 10:26:21
Subj: Re: Lost lan logon

From: jknott@ibm.net (James Knott)

However, you can replace \ibmlan\acounts\net.acc with 
\ibmlan\install\net.acc to restore the original "userid" and 
"password".  This will allow access to the computer security.

In article <3856558B.3ED5@attglobal.net>,
Jerry Stuckle <jstucklex@attglobal.net> wrote:
>George,
>
>Nope.  The userid and password are encrypted in the net.acc file - but
>there's no way to decrypt it.
>
>nospam.wxperson@pcwp.com wrote:
>> 
>> HI,
>> 
>> Is there anyway to recover the LAN logon userid and password for a
>> workstation?
>> 
>> This is on a backup PC that has not been touched in a year and I lost
>> that information.
>> 
>> This is for V4.0 of OS2.  Any hidden files, etc..??
>> 
>> Thanks,
>> 
>> George
>> wx@pcwp.com
>
>-- 
>
>=======================================================
>To reply, delete the "x" from my email address
>
>Jerry Stuckle
>jstucklex@attglobal.net
>JDS Computer Training Corp.
>Sun Certified Java Programmer
>VisualAge/Java Certified Advanced Technical Expert
>VisualAge/C++ Certified Developer
>
>=======================================================

-- 
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: jknott@ibm.net                                    15-Dec-99 05:53:09
  To: All                                               15-Dec-99 10:26:21
Subj: Re: sharing os2 printer from win95

From: jknott@ibm.net (James Knott)

In article <EBG54.33089$eh2.532962@news2.rdc1.on.home.com>,
samsonow@home.com (as) wrote:
>My os2 computer has 2 network cards, my win95 computer
>one network card.  One card from the os2 computer plugs into a hub along with
>the win95 computer.  I have file and print sharing installed in os2 but how
do
>i get things to work so that i can print from the win95 computer to a printer
>attached to the os2 computer?  When i boot win95 (also available on the os2
>computer) i can print and share files no problem so i know the hardware is
>okay.  Any os2 configuration help here would greatly be appreciated.

You'll need to have the file & print client installed.  This will give
you a folder called Network Services, located in the 
Connections>Network folder.  In there, you'll find a Shared Resources 
and Network Connections object.  Use this to create the share.  You 
can also create shares from the command line or by right clicking on 
the printer.


-- 
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: t_am@gmx.de                                       15-Dec-99 08:24:20
  To: All                                               15-Dec-99 16:48:08
Subj: Re: How to see a shared drive from NT workstation 4

From: t_am@gmx.de (Timo Maier)

Hi Rainer!

>Microsoft "TCP/IP" = IBM "Netbios over TCP/IP"
Microsoft "TCP/IP" = IBM TCP/IP + IBM "Netbios over TCP/IP"

TAM
-- 
OS/2 Warp4, Ducati 750SS '92
http://www.privat.toplink.de/homepages/thunder
Remove "_" for eMail reply

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Freiburg/Germany (1:109/42)

+----------------------------------------------------------------------------+

From: jens.deletethis.berg@gmx.deletet...               15-Dec-99 16:23:24
  To: All                                               15-Dec-99 16:48:09
Subj: Re: Netbios over tcp/ip questions

Message sender: jens.deletethis.berg@gmx.deletethis.net

From: "Jens Berg" <jens.deletethis.berg@gmx.deletethis.net>

Remove the NETBIOS protocol, since NETBIOS over TCP/IP will probably do 
everything you need. Setup rfcnames.lst correctly and run rfcaddr.exe after 
modifications to this file.

On Tue, 14 Dec 1999 13:58:49 -0500, Michael W. Cocke wrote:

>I have netbios, tcp/ip, and netbios over tcp/ip configured for the 
>appropriate interfaces.  I can ping from one to the other successfully. 

-- 
Jens Berg, Werftstr. 27, 24148 Kiel, Germany
mailto:jens.deletethis.berg@gmx.deletethis.net


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: CorTech A/S ZN Kiel (1:109/42)

+----------------------------------------------------------------------------+

From: hafflys@primenet.com                              16-Dec-99 03:08:12
  To: All                                               16-Dec-99 00:43:20
Subj: Re: sharing os2 printer from win95

From: Stephen Haffly <hafflys@primenet.com>

 
>  
> My os2 computer has 2 network cards, my win95 computer 
> one network card.  One card from the os2 computer plugs into a hub along
with 
> the win95 computer.  I have file and print sharing installed in os2 but how
do 
> i get things to work so that i can print from the win95 computer to a
printer 
> attached to the os2 computer?  When i boot win95 (also available on the os2 
> computer) i can print and share files no problem so i know the hardware is 
> okay.  Any os2 configuration help here would greatly be appreciated. 
>  
>  
Assuming you are connected and have peer services installed, you will need to
share the printer   
on the OS/2 side.  I found that with my BJC-610 attached to my OS/2 box, I had 
to map it to a   
local printer port (lpt2) on the W95 side before I could print to it.  Even
so, printing from   
OS/2 to the BJC-210 attached to the W95 box is fast, but printing from the W95 
box to the   
OS/2's BJC-610 is very slow.  Of course, depending on the printer, YMMV. 
 


Stephen Haffly 
Team OS/2   Team GEOS -- OS/2 and New Deal Office 98 - What a combo! 
hafflys@primenet  FIDO 1:309/63.4  http://www.primenet.com/~hafflys

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Frontier GlobalCenter Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: aa158@valleynet.on.ca                             15-Dec-99 19:23:02
  To: tvshow@attglobal.net                              16-Dec-99 02:11:09
Subj: Re: Proxy for Mac-Help!!!

To: tvshow@attglobal.net
From: Richard Birchall <aa158@valleynet.on.ca>

In article <385634a7_2@news2.prserv.net>,
  <tvshow@attglobal.net> wrote:
> I am running windows NT server as my proxy server. I need to solve
> various NT-OS2 problems like how do i get proxy client for Mac OS2 to
> access my MS proxy server.

If you are running MS Proxy Server, then there is no "Winsock Proxy
Client" for either Macintosh or OS/2.

Those clients will be limited to HTTP (web) (and some other
protocols).

That is, no POP (email), FTP, NNTP (news), etc.


The exception is if you can find client applications which have SOCKS
support.


Richard



Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: n/a (1:109/42)

+----------------------------------------------------------------------------+

From: samsonow@home.com                                 15-Dec-99 20:38:08
  To: All                                               16-Dec-99 02:11:09
Subj: Re: sharing os2 printer from win95

From: samsonow@home.com (as)

In message <eM3V4odSRMOO089yn@ibm.net> - jknott@ibm.net (James Knott)Wed, 15
Dec 1999 05:53:18 -0500 writes:
:>
:>In article <EBG54.33089$eh2.532962@news2.rdc1.on.home.com>,
:>samsonow@home.com (as) wrote:
:>>My os2 computer has 2 network cards, my win95 computer
:>>one network card.  One card from the os2 computer plugs into a hub along
with
:>>the win95 computer.  I have file and print sharing installed in os2 but how 
do
:>>i get things to work so that i can print from the win95 computer to a
printer
:>>attached to the os2 computer?  When i boot win95 (also available on the os2
:>>computer) i can print and share files no problem so i know the hardware is
:>>okay.  Any os2 configuration help here would greatly be appreciated.
:>
:>You'll need to have the file & print client installed.  This will give
:>you a folder called Network Services, located in the 
:>Connections>Network folder.  In there, you'll find a Shared Resources 
:>and Network Connections object.  Use this to create the share.  You 
:>can also create shares from the command line or by right clicking on 
:>the printer.
:>
:>
:>-- 
:>E-mail jknott@ca.ibm.com
:>_________________________________________________________________________
:>The above opinions are my own and not those of ISM Corp., a subsidiary of
:>IBM Canada Ltd.


I believe i already have that installed as under Network i have 3 folders,
Network, File and Print Resource Browser and Network Services.  When i open
the network services folder the wait icon appears, lasts forever and the
folder remains empty.  Any suggestions on what to do?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network Canada (1:109/42)

+----------------------------------------------------------------------------+

From: jag12@_nospam_le.ac.uk                            16-Dec-99 12:02:21
  To: All                                               16-Dec-99 10:28:06
Subj: Re: NIC going to sleep?

From: Dr J A Gow <jag12@_nospam_le.ac.uk>


Mark Davis wrote:
> 
> I have a home LAN with a mix of machines. We use a Linux box attached to a
DSL
> modem as our internet gateway. The other machines run Warp 4 or Win95/98 and
> use tcpip and NETBIOS/NETBEUI. Samba is not loaded on the Linux box. My
> problem is with my main machine running Warp 4. For about the past month or
> so, the connection LED on the hub will go out. When that happens, I lose all
> connections with the LAN and, naturally, with the internet. I can go to
> another machine and ping the problem machine and it will "wake up" but I
> cannot wake it up from the problem machine. The NIC is a 3com 3c595 Fast
> Etherlink. Two other machines on the network have the same card but don't
> exhibit the same symptoms, though one loses connection without losing the
LED;
> I can refresh its connection by unplugging the patch cable from the wall
plate
> and plugging it back in.
> 
> Does this sound like a hardware problem? Thanks for any suggestions.
> 
> Mark Davis
> San Angelo, TX

If you have a Lose9x partition on the Warp box, does the same machine
drop its connection under this so-called OS as well as with Warp?

If not, then this problem may be similar to a common experience that 
some people (including myself) have had with the TCP/IP stack under
Warp.
It sounds as though it might be related, so I'll give you the solution
to
this problem and you can at least try it.

Problem: OS/2 Warp TCPIP stack ceases to function after a period of time
         after boot

Solution: The OS/2 TCPIP installer tries to place two route statements
	  in the \mptn\bin\SETUP.CMD file. One starts
	
	  route add default .......

	  and the other starts

	  route add net ........

	  When the default route is set (first line is run, the TCPIP
	  route command adds the net route transparently, so the second
          line is redundant. Simply remove the 'route add net' line and
          reboot, the problem should go away


However, it seems that as the connection LED is going out on the hub,
then
it is just possible that there might be a h/w problem. Have you tried 
changing the cable between the hub and the affected machine? 

	John.

-- 
 _________________
______________________________________________________
|                 |                                                     
|
|	          | Dr. J.A. Gow M.Eng AMIEE                             |
|      \||/       | Research Associate, Power Electronics Research Group
|
|       \/        | Leicester University                                
|
|   __  00        | University Road                                     
|
|  /  \/  \_@     | Leicester, UK.                                      
|
| |          \    |                                                     
|
|  \__/    \  \   | Tel: (0468) 328787                                  
|
|  /  \    /\  |  |                                                     
|
| |    \__/    |  | email:   jag12@le.ac.uk                             
|
| |           /   |                                                     
|
|  \__    __ /    |                                                     
|
|     ||||        |                                                     
|
|   __||||__      |                                                     
|
|  <___||___>     |         ______________________________              
|
|_________________|________|THIS IS A MICROSOFT-FREE
ZONE!|______________|

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: University of Leicester, UK (1:109/42)

+----------------------------------------------------------------------------+

From: george.mccabe@gsfc.nasa.gov                       16-Dec-99 09:52:20
  To: All                                               16-Dec-99 10:57:20
Subj: rsh error

From: George McCabe <george.mccabe@gsfc.nasa.gov>

hello,

trying to copy a tape across the net from one DAT drive on a unix host
to another on an OS/2 host -

rsh <unix_host> -b -n "dd if=/dev/rmt/tps1d3v ibs=61440 obs=2b" | buffer
-
b10240 | tape -block 10240 write
Write tape from pipe
        -2147475456 bytes written
RSH 2047: Error DosWrite=109

note that the 'buffer' and 'tape' commands which are part of the
gtak/gtar software seems not to be the problem.  

if i repeat the operation above the same error, at the same byte,
occurs.  it's strange that OS/2 rsh would have a problem with how much
data is piped through stdin.  any ideas?

thanks, george

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: NASA Goddard Space Flight Center -- Greenbelt, Ma
(1:109/42)

+----------------------------------------------------------------------------+

From: krask@mediac.dk                                   16-Dec-99 15:36:29
  To: All                                               16-Dec-99 13:28:01
Subj: Re: rsh error

From: krask@mediac.dk (Kristian Rask)

Hi

On Thu, 16 Dec 1999 09:52:40 -0500, George McCabe
<george.mccabe@gsfc.nasa.gov> wrote:

>hello,
>trying to copy a tape across the net from one DAT drive on a unix host
>to another on an OS/2 host -
>rsh <unix_host> -b -n "dd if=/dev/rmt/tps1d3v ibs=61440 obs=2b" | buffer-
>b10240 | tape -block 10240 write
>Write tape from pipe
>        -2147475456 bytes written
>RSH 2047: Error DosWrite=109
>
>note that the 'buffer' and 'tape' commands which are part of the
>gtak/gtar software seems not to be the problem.  
>
>if i repeat the operation above the same error, at the same byte,
>occurs.  it's strange that OS/2 rsh would have a problem with how much
>data is piped through stdin.  any ideas?

I really dont know this, but aint there a 2Gig file (pipe ?) limit in
dos (Error DosWrite=109)

regards

Kristian

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Agora (1:109/42)

+----------------------------------------------------------------------------+

From: oliver.rick@oor.de                                15-Dec-99 21:39:17
  To: All                                               16-Dec-99 16:52:16
Subj: Re: tcpcoex.log question also y2k & tcp update

From: oliver.rick@oor.de (Oliver Rick)

On Tue, 14 Dec 1999 Jim Backus wrote:

> While doing y2k updates to tcp/ip on a Warp 3 Connect installation, I
> noticed a file TCPCOEX.LOG.  What is the purpose of this file?  There
> are a number of entries of the form "Tcpcoex <time> <date>" followed
> by
> "End Tcpcoex"

IIRC, it ensures that you have a consistent TCP/IP package. There is much
that depend on each other.

> It seems that no MPTN update for y2k is needed for Warp 3 - is this
> correct?

Yes.

> It seems that Warp 3 is y2k compliant with a recent fix pack
> (FP 32 or later), updates to tcp/ip (v30y2k.exe) and to UPM (IP08196)
> - is that the complete list?

No, there are printer driver, browsers, Java, ...
You can check your components here:
http://www.warpupdates.de/english/warp_year2000.html

> Are there advantages to be gained through installing TCP/IP 4 or later
> on a Warp Connect system?

TCP/IP 3.0 is a small package. 4.0 has more services.

> How is it done?

Dunno. It's not legal IMHO, if you have only one licence.

> I've got Warp 4 on another PC so have access to TCP/IP 4.0.

You can upgrade TCP/IP 3.0 to 3.1 by applying MPTS FixPak WR08210 plus
TCP/IP 3.1 CSD UN00959 (makes a complete package).
You can add a 4.0 stack with MPTS FixPak WR08423 (+ WR08424).
Upgrade the services to 4.0 with TCP/IP 3.1 & 4.0 FixPak UN_0980 (not a
complete package).
A 32-bit TCP/IP stack (4.2) is included in MPTS FixPak WR08610 (+ WR08620,
4.21).
See http://www.warpupdates.de/english/tcp_upgrades.html for a summary.
Please read the information boxes shown on the site.

   /Olli/
--
IBM OS/2 Warp Update Summary:
http://www.warpupdates.de/english/warpupdates.html

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Out of Rosenheim/2 (1:109/42)

+----------------------------------------------------------------------------+

From: jeburke@laplaza.org                               16-Dec-99 21:01:21
  To: All                                               16-Dec-99 19:47:15
Subj: Re: No tcpip drivers for an older NIC?  long

From: jeburke@laplaza.org (Jane Burke Plowden-Wardlaw)

Posting from my sister's machine.... 
see below
On Tue, 14 Dec 1999 23:21:53 +0100, Meinolf Sondermann
<merlins@ibm.net> wrote:


>> 
>> [HPLANE_nif]
>> 
>>    DriverName = HPLANE$
>>    AdapterSlot = 1
>
>Are there really no other parms to configure, like e.g MAXTRANSMITS ?

No, there are none. This is what gave rise to the original question. 

I'm not at home now and can't experiment with the suggested changes
I've received. But nowhere in the readme's does it mention tcpip. It
talks of 802.2 protocol and netware. 



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Southwest Cyberport (1:109/42)

+----------------------------------------------------------------------------+

From: jkrim@ecrix.com                                   16-Dec-99 23:40:22
  To: All                                               17-Dec-99 03:47:21
Subj: Can't print to TCP/IP network printer

From: jkrim@ecrix.com

I am running Warp 4.0 Fixpak 12 and I can't seem to print to a network
attached (TCP/IP) printer from an appplication like NR/2 or Adobe Acrobat
Reader.  I have LPT1 redirected to \pipe\lpd0 and I have tried both the
name and the IP number of the print server, but the file shows up in the
printer 'Job Icon View', then after a short time the pop-up message
saying 'printer not responding' appears.

Interestingly enough, printing from an OS/2 command prompt some text file
using the 'print' command works.

Any help greatly appreciated.

Jordan Krim
jkrim@ecrix.com
jkrim@mho.com

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RMI.NET (1:109/42)

+----------------------------------------------------------------------------+

From: hemo_jr@attglobal.net                             16-Dec-99 18:54:02
  To: All                                               17-Dec-99 03:47:21
Subj: Re: Can't print to TCP/IP network printer

From: hemo_jr@attglobal.net (Matt Hickman)

In <1Me64.4958$6c6.531685@den-news1.rmi.net>, on 12/16/99 
   at 11:40 PM, jkrim@ecrix.com said:

>I am running Warp 4.0 Fixpak 12 and I can't seem to print to a network
>attached (TCP/IP) printer from an appplication like NR/2 or Adobe Acrobat
>Reader.  I have LPT1 redirected to \pipe\lpd0 and I have tried both the
>name and the IP number of the print server, but the file shows up in the
>printer 'Job Icon View', then after a short time the pop-up message
>saying 'printer not responding' appears.

Have you set up printer queue with the proper driver?

-- 
Matt Hickman
 There is something about a command issued by one who is used to being obeyed
 which enforces compliance.  It may be intonation, or possibly a more esoteric
 power, such as animal tamers are reputed to be able to exercise in
controlling
 ferocious beasts.  But it does exist, and can be used to compel even those
not
 habituated to obedience.
                         Robert A. Heinlein (1907 - 1988)
                         "The Roads Must Roll" c. 1940 (ASF)

** Join the SETI@home club "The Heinleiners" go to
http://setiathome.ssl.berkeley.edu/stats/team/team_17222.html


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: jpolt@bradnet.legend.co.uk                        17-Dec-99 01:38:19
  To: All                                               17-Dec-99 03:47:22
Subj: IBM PS/2 E & Socket Services

From: jpolt@bradnet.legend.co.uk (John Poltorak)

I'm trying to get a PCMCIA token ring card working under OS/2 on a PS/2 E
and hitting a few problems...

LANTRAN.LOG says

Token-Ring Credit Card Inserted in socket 03.

followed by

A Token-Ring Credit Card is not present in a socket

Does this mean I have the wrong version of socket services loaded ?

What else could be causing the problem?...

The machine itself will boot via RIPL without any problems or changes of
configuration

--
John

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Legend Internet Ltd (1:109/42)

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              17-Dec-99 03:57:26
  To: All                                               17-Dec-99 03:47:22
Subj: Re: Can't print to TCP/IP network printer

From: James Moe <sma.spam-not@rtd.com>


jkrim@ecrix.com wrote:
> 
> I am running Warp 4.0 Fixpak 12 and I can't seem to print to a network
> attached (TCP/IP) printer from an appplication like NR/2 or Adobe Acrobat
> Reader.  I have LPT1 redirected to \pipe\lpd0

  Explain exactly how you did this. (I have done it myself but it is a
wasteful and ridiculous loop I put together due to a mostly Windows
shop.)


> and I have tried both the
> name and the IP number of the print server, but the file shows up in the
> printer 'Job Icon View', then after a short time the pop-up message
> saying 'printer not responding' appears.
> 
  Do you have the correct name for the "printer" in the printer's LPD
server? Each brand of printer seems to use a different one. HP prefers
"lp"; I have one that uses "postscript"; others use "printer". The
printer's internal queue name seems a dark secret, hard to come by,
buried deep within the technical (not user) manual.


> Interestingly enough, printing from an OS/2 command prompt some text file
> using the 'print' command works.
> 
  You may be re-directing directly to the printer using LPRMON, not LPD.
  As requested above, explain in excruciating detail how you set it up.

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: jim.danvers@mindex.com                            16-Dec-99 23:06:23
  To: All                                               17-Dec-99 03:47:22
Subj: Re: Connecting to a Linux server

From: Jim Danvers <jim.danvers@mindex.com>

Lorne, et all ...

How do I tell what the current version of MPTS is?  I learned about the
inetver
thing earlier tonight.   :)

-=- J.D. -=-

Lorne Sunley wrote:

> On Fri, 10 Dec 1999 05:02:54, "Barry" <72764.2166@csi.com> wrote:
>
> > I have 2 computers networked.  Computer #1 runs Red Hat Linux 6.0, 
Computer
> > #2 is a dual boot OS/2-WIN98 computer.  If I boot Computer #2 to WIN98 and
> > set it up to use either DHCP or manually entering of the IP address, I do
> > connect to the Linux box and see the shares.
> > If I boot computer #2 to OS/2 and setup TCPIP to manually enter the IP
> > address, I do connect to the Linux box and see the shares.
> > However, If I change the TCPIP settings to automatically get IP address
using
> > the Linux computer's DHCP server (and that is the only change I am
making),
> > reboot, I do NOT see the Linux box.  I know the DHCP is working okay on
the
> > OS/2 side since the DHCP monitor shows a valid lease with the correct IP
> > address (the same IP address that shows when I boot WIN98 using DHCP).  Of
> > course if I change back to manually entering the IP address, the shares
then
> > show up.  Any ideas?
> >
>
> What version of MPTS do you have installed?
>
> There are bugs in the earlier releases of MPTS and it's
> DHCP handling. If you haven't tried it yet update the
> MPTS level to WR8610.
>
> --
>
> Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              17-Dec-99 04:37:18
  To: All                                               17-Dec-99 03:47:22
Subj: Re: Connecting to a Linux server

From: James Moe <sma.spam-not@rtd.com>


Jim Danvers wrote:
> 
> Lorne, et all ...
> 
> How do I tell what the current version of MPTS is?  I learned about the
inetver
> thing earlier tonight.   :)
> 
  INETVER gives the current versions of the MPTS tcpip protocol stack.
To see the current version of everything on your system run SYSLEVEL.
Make life easier by re-directing the output to a file first then use an
editor to look at the stuff. Search for TCP for tcpip components.

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: jknott@ibm.net                                    17-Dec-99 05:47:24
  To: All                                               17-Dec-99 10:29:26
Subj: Re: sharing os2 printer from win95

From: jknott@ibm.net (James Knott)

I'm not sure why you don't have the icons.  However, you should still 
be able to share using the command line method or by right clicking on
the printer.  You have to be logged in before you share anything.


In article <Z_S54.35508$eh2.562873@news2.rdc1.on.home.com>,
samsonow@home.com (as) wrote:
>In message <eM3V4odSRMOO089yn@ibm.net> - jknott@ibm.net (James Knott)Wed, 15
>Dec 1999 05:53:18 -0500 writes:
>:>
>:>In article <EBG54.33089$eh2.532962@news2.rdc1.on.home.com>,
>:>samsonow@home.com (as) wrote:
>:>>My os2 computer has 2 network cards, my win95 computer
>:>>one network card.  One card from the os2 computer plugs into a hub along
with
>:>>the win95 computer.  I have file and print sharing installed in os2 but
how do
>:>>i get things to work so that i can print from the win95 computer to a
printer
>:>>attached to the os2 computer?  When i boot win95 (also available on the
os2
>:>>computer) i can print and share files no problem so i know the hardware is
>:>>okay.  Any os2 configuration help here would greatly be appreciated.
>:>
>:>You'll need to have the file & print client installed.  This will give
>:>you a folder called Network Services, located in the 
>:>Connections>Network folder.  In there, you'll find a Shared Resources 
>:>and Network Connections object.  Use this to create the share.  You 
>:>can also create shares from the command line or by right clicking on 
>:>the printer.
>:>
>:>
>:>-- 
>:>E-mail jknott@ca.ibm.com
>:>_________________________________________________________________________
>:>The above opinions are my own and not those of ISM Corp., a subsidiary of
>:>IBM Canada Ltd.
>
>
>I believe i already have that installed as under Network i have 3 folders,
>Network, File and Print Resource Browser and Network Services.  When i open
>the network services folder the wait icon appears, lasts forever and the
>folder remains empty.  Any suggestions on what to do?
>

-- 
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: phillipd@antares.cloudnet.com                     17-Dec-99 12:17:13
  To: All                                               17-Dec-99 10:29:26
Subj: Re: Can one static (ADSL) IP be shared by two computers without setting

From: Phillip Davenport <phillipd@antares.cloudnet.com>

Lorne Sunley <lsunley@mb.sympatico.ca> wrote:
> On Sat, 11 Dec 1999 17:59:08, Robert Holmgren <holmgren@idt.net> 
> wrote:
>> 
>> Is there any decent freeware gateway software -- or is Injoy the
>> consensus/quality choice?

> The WR8610 stack update provides the drivers for NAT
> and VPN. The only "gotcha" is the fact that the NAT requires
> a "real" IP address for each "internal" IP address that
> has access to the internet. Plus the fact that the documentation
> does not mention how to configure the NAT capability. There
> is an IBM Redbook for AIX that does document it though.

At least IBM documents the policy assumptions they made..

Here
-</http://publib.boulder.ibm.com:80/cgi-bin/bookmgr/BOOKS/SG242577/10.0/>

Basically, SOCKS for those that can, proxies for those that can't, NAT for
hacks..

  p

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Cloudnet - St. Cloud, MN (320) 240-8243 (1:109/42)

+----------------------------------------------------------------------------+

From: george.mccabe@gsfc.nasa.gov                       17-Dec-99 11:25:02
  To: krask@mediac.dk                                   17-Dec-99 20:07:15
Subj: Re: rsh error

To: Kristian Rask <krask@mediac.dk>
From: George McCabe <george.mccabe@gsfc.nasa.gov>

Kristian,  thanks for the reply.

1) does OS/2 use a DOS pipe or a pipe with a 2Gb limit?
2) is a pipeline a file?  

i think the answer to the 2nd question is No, and pipelines as used in
the OS/2 CMD shell don't have a 2Gb limit - i tested this locally by
piping 5Gb to BUFFER > NUL.  in any event there seems to be a 2Gb limit
on piping from rsh the way that i am doing it, and i can't think of a
way around it except breaking up the file into small pieces. Yuk!

george

Kristian Rask wrote:
> I really dont know this, but aint there a 2Gig file (pipe ?) limit in
> dos (Error DosWrite=109)

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: NASA Goddard Space Flight Center -- Greenbelt, Ma
(1:109/42)

+----------------------------------------------------------------------------+

From: andret@city.yellowknife.nt.ca                     17-Dec-99 10:29:17
  To: laniear@pacificnet.net                            17-Dec-99 20:07:15
Subj: Re: NT client for Warp Server

To: laniear@pacificnet.net
From: Andre Thibodeau <andret@city.yellowknife.nt.ca>


http://service5.boulder.ibm.com/pspfixpk.nsf/3f5d9c073e8a66718625662800691e9b/1
2de59cba201378d85256792006a3c0c?OpenDocument



laniear@pacificnet.net wrote:

> Last year I setup an NT system and I wanted to be able to logon to my
> server.  I donwloaded the NT client from some page at IBM.  I'm using
> the NT machine again and I can't find the client anywhere.  Anyone know
> where I can find it again?
>
> BTW, if there a Linux client also?
>
> Thanks in advance,
>
> Lee

--
Lan Administrator
City of Yellowknife
4807 52nd Street - City Hall
Yellowknife, NT  X1A 2N4
ph: 867-920-5615, fx: 867-669-3462
http://city.yellowknife.nt.ca


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: City of Yellowknife (1:109/42)

+----------------------------------------------------------------------------+

From: andret@city.yellowknife.nt.ca                     17-Dec-99 10:29:08
  To: laniear@pacificnet.net                            17-Dec-99 20:07:15
Subj: Re: NT client for Warp Server

To: laniear@pacificnet.net
From: Andre Thibodeau <andret@city.yellowknife.nt.ca>


http://service5.boulder.ibm.com/pspfixpk.nsf/3f5d9c073e8a66718625662800691e9b/1
2de59cba201378d85256792006a3c0c?OpenDocument



laniear@pacificnet.net wrote:

> Last year I setup an NT system and I wanted to be able to logon to my
> server.  I donwloaded the NT client from some page at IBM.  I'm using
> the NT machine again and I can't find the client anywhere.  Anyone know
> where I can find it again?
>
> BTW, if there a Linux client also?
>
> Thanks in advance,
>
> Lee

--
Lan Administrator
City of Yellowknife
4807 52nd Street - City Hall
Yellowknife, NT  X1A 2N4
ph: 867-920-5615, fx: 867-669-3462
http://city.yellowknife.nt.ca


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: City of Yellowknife (1:109/42)

+----------------------------------------------------------------------------+

From: jkrim@ecrix.com                                   17-Dec-99 17:31:21
  To: All                                               17-Dec-99 20:07:15
Subj: Re: Can't print to TCP/IP network printer

From: jkrim@ecrix.com

In <3859B4BD.A4B934D5@rtd.com>, James Moe <sma.spam-not@rtd.com> writes:
>
>  You may be re-directing directly to the printer using LPRMON, not LPD.
>  As requested above, explain in excruciating detail how you set it up.

Well, in any case I got it working.
I have my output port set to \pipe\lpd0 where my LPD server is the IP of
the printer and the LPD printer is the name of the printer.

I think I was having problems starting LPRPORTD.EXE, but after fiddling around
with the TCP/IP settings managed to do it.

Jordan Krim
jkrim@ecrix.com
jkrim@mho.com

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RMI.NET (1:109/42)

+----------------------------------------------------------------------------+

From: PGegen@UKans.nolospamare.edu                      17-Dec-99 21:35:06
  To: All                                               17-Dec-99 20:07:16
Subj: Re: DOCSIS modem ?

From: PGegen@UKans.nolospamare.edu (Dr. Peter Gegenheimer)

On Wed, 15 Dec 1999 02:56:54, racette@cablevision.qc.ca (Martin Racette) 
wrote:

 Hi guys,
 
 I have to switch to DOCSIS modem, 
 because my ISP, and I know from work 
 that I need to run in Win98 
 "WINIPCFG.EXE" to make the modem find 
 the IPs it requires, but how can I do 
 something like that in Warp ??????

You run <install dir>/tcpip/bin/tcpcfg.exe. This is normally run by opening 
the "OS/2 System" folder, then the "TCP/IP Internet Folder", then launching 
"TCP/IP Configuration". You do NOT want the folder for dial-up connections, 
rather the one for direct internet connection. 

You want to configure "Lan Interface 0" -- click on "[] Enable", then select 
"0 Automatically, using DHCP" if your cable co is providing IP numbers 
automatically each time you log on; or, if not, then select "0 Manually, using
.." and type in the 2 IP's needed (your cable co. will have given them to 
you). 

Note that "router" and "gateway" are the same, and "netmask" or "subnet mask" 
are the same -- but check w/ cable co. if their names don't match IBM's! 

If you have automatic IP assignment via DHCP [dynamic host configuration 
protocol?], there is a tool called  <install dir>/C:/MPTN/BIN/dhcpmon.exe with
you should put in your startup folder. (Please don't ask why it's not in the 
Internet Utilities folder...) This monitors the status of your DHCP 
connection: shows the negotiation that your computer and the cable co undergo 
to assign your IP, what the current IP is, and how much longer you have to go 
on its "lease." This will help debug errors & connections. 

o----------------------------------------------------------------------o
| Dr. Peter Gegenheimer       | Vox: 785-864-3939  FAX: 785-864-5321   |
| Department of               |   PGegen@UKans.nospam.edu              |
|   Molecular Biosciences     |   http://rnaworld.bio.ukans.edu/       |
| University of Kansas        |"When you have excluded the impossible, |
| 2045 Haworth Hall           |  whatever remains, however improbable, |
| Lawrence  KS  66045-2106    |  must be the truth."      S. Holmes    |
o_____________________________|________________________________________o

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Univ. Kansas (Molecular Biosciences) (1:109/42)

+----------------------------------------------------------------------------+

+============================================================================+
