
                   comp.os.os2.networking.misc      (Usenet)

                 Saturday, 04-Dec-1999 to Friday, 10-Dec-1999

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         03-Dec-99 22:08:17
  To: All                                               04-Dec-99 10:37:14
Subj: Bug, bugs, and more bugs

From: Fujiha <peterpan@mail2.dgraph.com>

I have had it.

My Warp 4 box forgets all the network settings about 1 hour after
reboot.
If I reassign IPs to the two interfaces (lan0 .1-.5, lan1 10.10.10.x)
they will be reachable for 5-6 minutes (as opposed to ~1 hour if I
reboot).

All hardware tested and working 100%
Warp 4
TCP/IP 4.1 (latest fixes)
5 static IPs

I need to run a DNS on this box and am beginning to wonder if it is
worth it (should I simply use Linux for this?).

Thanks

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         03-Dec-99 22:20:01
  To: All                                               04-Dec-99 10:37:14
Subj: Re: Losing network path?

From: Fujiha <peterpan@mail2.dgraph.com>

This sounds like the same problem I am having. In my case, I have static
IPs and the system has been almost working well for over a year till a
week ago. If I reassign my IPs and routes they stay up for only 5-6
minutes as opposed to 1 hour after a reboot. This is beginning to annoy
me to no end. Probably will reformat and install some other OS.

George McCabe wrote:
> 
> jon,
> 
> from the errors you describe, sounds like your connection to the network has
> gone down.  when browsing and email fails next time, try to ping your ISP's
> name server to verify that the you have network access.  if that ping fails,
> then ping yourself. if necessary contact tech support at your ISP and tell
> them your conection is bad.
> 
> one other thing, if this failure always occurs after a set amount of time
> then i'ld look into power saving features which might be turned on in your
> system.
> 
> george
> 
> Jon Cleveland wrote:
> 
> > Hi. I don't know much about networking at all, but here is my problem.
> > I have a cable modem and it works great after boot up, but after I've
> > been on for about an hour or so, my browser and my e-mail program seem
> > to lose the path. No matter what url I try to connect to Netscape gives
> > an error message saying can't find the page. So I try my e-mail program,
> >
> > it reports the server is unreachable. The DHCP monitor says I still have
> > a valid
> > lease. If I reboot all is well again. Any suggestions?
> >
> > Jon Cleveland

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: sonalar@sonalar.es                                02-Dec-99 12:47:20
  To: All                                               04-Dec-99 10:37:14
Subj: ethernet soft para MS-DOC

From: "Javier Alcaraz" <sonalar@sonalar.es>

    hola grupo...


    Estoy buscando un software antiguo para redes de rea local que
trabajaba en DOS llamado:

    NETWORK-OS PLUS V7.20

    El fabricante de este programa era CBIS, Inc. pero me parece que han
desaparecido del planeta tierra.

    Serva para controlar unas tarjetas de red Ethernet, en concreto el
modelo de tarjeta era el Western Digital WD-8003E (s WD no slo haca
discos duros).

    He intentado buscar por todas partes pero no me he comido ni una rosca;
si alguien sabe algn dato sobre el programa, se lo agradecer eternamente.


Javier Alcaraz
sonalar@sonalar.es





--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Telefonica Transmision de Datos (1:109/42)

+----------------------------------------------------------------------------+

From: JHB@jita.nospam.demon.co.uk                       04-Dec-99 18:34:23
  To: All                                               04-Dec-99 16:31:19
Subj: Re: HELP PLEASE ON SIMPLE NETWORKING

From: JHB@jita.nospam.demon.co.uk (Jim Backus)

On Fri, 3 Dec 1999 17:02:27, "Dean Taylor" <mdtaylor@mdtaylor.com> 
wrote:

> FIRSTLY I AM A COMPLETE NOVICE !!!!!!!
> 
> How do I move a file from my remote machine on to the one I am viewing it on
> so i can open it.????????
> 
> I AM USING A HUB CONNECTION BETWEEN 2 OF MY COMPUTERS  ETC
> 
> I can see the files on my remote machine(machine2)-- but cannot open them on
> the machine i am seeing them on !!(machine 1)
> Can i open files for example photoshop ms word
> am i allowed to print them off then etc?????
> 
> 
> Is there a way to get them across or do i drag and drop ??
> 
> I have given full access to all machines with no pass words installed as it
> is only me who uses this network.
> 
> I run windows 98 on both machines
> I would be grateful for any help.

You might get more useful answers from a newsgroup that specialised in
Windows networking.  Windows tends to dump all the DLLs into the 
Windows directory structure so it may be necessary to have the 
application installed on both PCs.

--
Jim Backus  OS/2 - 32 bits without the bloat
bona fide replies to jimb(at)jita(dot)demon(dot)co(dot)uk
http://www.jita.demon.co.uk

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Fourmyle (1:109/42)

+----------------------------------------------------------------------------+

From: ccsten@usa.net                                    04-Dec-99 19:53:28
  To: All                                               05-Dec-99 03:19:15
Subj: Re: Bug, bugs, and more bugs

From: Terry Norton <ccsten@usa.net>

Try this.  In x:\mptn\bin\setup.cmd, delete the line that looks
similar to this:

route add -net 192.168.0 192.168.0.1 -netmask 255.255.255.0
-hopcount 1


Your IP address is probably different than mine in this line, but
that's the line that needs to be removed to stop TCP/IP from
magically quitting to function.



Fujiha wrote:
> 
> I have had it.
> 
> My Warp 4 box forgets all the network settings about 1 hour after
> reboot.
> If I reassign IPs to the two interfaces (lan0 .1-.5, lan1 10.10.10.x)
> they will be reachable for 5-6 minutes (as opposed to ~1 hour if I
> reboot).
> 
> All hardware tested and working 100%
> Warp 4
> TCP/IP 4.1 (latest fixes)
> 5 static IPs
> 
-- 

Terry Norton
Warped with OS/2

This OS/2 system uptime is 1d 1h 01m 22s 968ms (en).

Only in America... do people order double cheeseburgers, large
fries, and a Diet Coke.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Together Networks - Burlington, VT. (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         05-Dec-99 04:36:06
  To: All                                               05-Dec-99 10:37:08
Subj: Re: Bug, bugs, and more bugs

From: Fujiha <peterpan@mail2.dgraph.com>

Terry Norton wrote:
> 
> Try this.  In x:\mptn\bin\setup.cmd, delete the line that looks
> similar to this:
> 
> route add -net 192.168.0 192.168.0.1 -netmask 255.255.255.0
> -hopcount 1
> 
> Your IP address is probably different than mine in this line, but
> that's the line that needs to be removed to stop TCP/IP from
> magically quitting to function.

I only have a default route in my setup.cmd

But alas! Like magic, after 2 days of silence it started working. I know
I did not do anything since the PC is in my office and no one has been
there for a week. Magic I tell ya! It will probaly die in an hour or so
anyways. Will see.



> 
> Fujiha wrote:
> >
> > I have had it.
> >
> > My Warp 4 box forgets all the network settings about 1 hour after
> > reboot.
> > If I reassign IPs to the two interfaces (lan0 .1-.5, lan1 10.10.10.x)
> > they will be reachable for 5-6 minutes (as opposed to ~1 hour if I
> > reboot).
> >
> > All hardware tested and working 100%
> > Warp 4
> > TCP/IP 4.1 (latest fixes)
> > 5 static IPs
> >
> --
> 
> Terry Norton
> Warped with OS/2
> 
> This OS/2 system uptime is 1d 1h 01m 22s 968ms (en).
> 
> Only in America... do people order double cheeseburgers, large
> fries, and a Diet Coke.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         05-Dec-99 04:40:13
  To: All                                               05-Dec-99 10:37:08
Subj: Re: Bug, bugs, and more bugs

From: Fujiha <peterpan@mail2.dgraph.com>

Fujiha wrote:
> 
> Terry Norton wrote:
> >
> > Try this.  In x:\mptn\bin\setup.cmd, delete the line that looks
> > similar to this:
> >
> > route add -net 192.168.0 192.168.0.1 -netmask 255.255.255.0
> > -hopcount 1
> >
> > Your IP address is probably different than mine in this line, but
> > that's the line that needs to be removed to stop TCP/IP from
> > magically quitting to function.
> 
> I only have a default route in my setup.cmd
> 
> But alas! Like magic, after 2 days of silence it started working. I know
> I did not do anything since the PC is in my office and no one has been
> there for a week. Magic I tell ya! It will probaly die in an hour or so
> anyways. Will see.

It died again right after I managed to get my emails (so it was up for
5-6 minutes). Wonder if it will work again in 2 days but by then I will
most likely switch to linux.



> 
> >
> > Fujiha wrote:
> > >
> > > I have had it.
> > >
> > > My Warp 4 box forgets all the network settings about 1 hour after
> > > reboot.
> > > If I reassign IPs to the two interfaces (lan0 .1-.5, lan1 10.10.10.x)
> > > they will be reachable for 5-6 minutes (as opposed to ~1 hour if I
> > > reboot).
> > >
> > > All hardware tested and working 100%
> > > Warp 4
> > > TCP/IP 4.1 (latest fixes)
> > > 5 static IPs
> > >
> > --
> >
> > Terry Norton
> > Warped with OS/2
> >
> > This OS/2 system uptime is 1d 1h 01m 22s 968ms (en).
> >
> > Only in America... do people order double cheeseburgers, large
> > fries, and a Diet Coke.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: bobmcl@ibm.net                                    05-Dec-99 16:58:11
  To: All                                               05-Dec-99 19:50:28
Subj: Re: Peer Trouble

From: Bob McLellan <bobmcl@ibm.net>


Per Johannessen wrote:

> On Sun, 28 Nov 1999 16:51:14, pjohann@ibm.net (Per Johannessen) wrote:
>
> Please note my new e-mail address: pjohann@c2i.net
>
> > After some changes of NIC's I now have trouble
> > making my 3 pc's find each other. Each workstation
> > boots just fine, binding protocols and adapters.
> > (Running Ethernet and coax cabling.)
> > However, when I start the program for connections
> > and sharing, Peer services only finds the local PC
> > I'm searching from. When typing in the name on other
> > existing resources I get error message; unable to find
> > network path, and sometimes SYS0053.
> > I'm quite lost, so any help is welcome.

 'After some changes of NIC's I now have trouble' - I guess these are the
key words.
Check lantran.log in the ibmcom directory. You may find driver messages
relating to your problem. Chances are the drivers are not loading properly
(which is usually due to mismatch of interrupt etc).
Also run a current version of os2sniff (in the MPTS fixpacks). This will
find most drivers if they are loaded.

--
------------------------------------------------------
Bob McLellan
The Little Blue Kiwi
OS/2 Solutions for New Zeland


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: jeling@bigpond.com                                06-Dec-99 09:40:15
  To: All                                               05-Dec-99 19:50:29
Subj: Problem setting up network

From: "James Eling" <jeling@bigpond.com>

Hi,

I have limited OS 2 experience andam setting up a network between 3 os 2
Warp 4 (I think) PCs and 1 win 98 box.

So far 2 Os 2 and the win 98.  I can browse files from the win 98 machine
back to the OSs 2 boxes now I just have to go the other way.  (I don't think
that will be too hard.)  I could use net use and put that command in the
autoexec.bat I think.

My big problem at the moment is one of the machines seems to have a strange
setup.  The MPTS icon does not appear where it did with the other machines.
I first thought that maybe it hadn't been installed, until I read that it is
always installed.  Ilater found the directory and ran the program that way.
Most of the networking icons are missing.  Why are they missing and what can
I do to find tham again?

Thanks in advance.

--
James Eling


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Telstra BigPond Internet Services (http://www.big
(1:109/42)

+----------------------------------------------------------------------------+

From: mmellin@home.com                                  06-Dec-99 00:47:21
  To: All                                               05-Dec-99 21:17:16
Subj: Networking a HP LaserJet4...

From: mmellin@home.com (Mark Mellin)

Any ideas on how to connect/configure Warp4 as the print server on
a HP LaserJet4 using HP's JetDirect card across a 10-BaseT peer
network with TCP/IP ??

I couldn't & didn't find any JetDirect software for OS/2 on HP's
or IBM's driver site(s).

My telenet'd config for the Jetdirect card is as follows:

===JetDirect Telnet Configuration===

        Configured Parameters
        IP Address      : 192.168.1.5
        Subnet Mask     : 255.255.255.0
        Default Gateway : 192.168.1.5
        Syslog Server   : 192.168.1.1
        Idle Timeout    : 90 Seconds


Everything seems to be connected and working properly...

Thanks in advance for any help.
Mark

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network (1:109/42)

+----------------------------------------------------------------------------+

From: ktkelvin@yahoo.com                                06-Dec-99 09:35:29
  To: All                                               06-Dec-99 03:38:14
Subj: Re: Networking a HP LaserJet4...

From: "Kelvin Tsang" <ktkelvin@yahoo.com>

Why ?  The JetAdmin for OS/2 is comes with the JetDirect.
Or you may find it easily at HP's homepage :
http://www.hp.com/cposupport/prodhome/hpjetadmin1877.html
Kelvin



Mark Mellin g峹 ...
>Any ideas on how to connect/configure Warp4 as the print server on
>a HP LaserJet4 using HP's JetDirect card across a 10-BaseT peer
>network with TCP/IP ??
>
>I couldn't & didn't find any JetDirect software for OS/2 on HP's
>or IBM's driver site(s).
>
>My telenet'd config for the Jetdirect card is as follows:
>
>===JetDirect Telnet Configuration===
>
>        Configured Parameters
>        IP Address      : 192.168.1.5
>        Subnet Mask     : 255.255.255.0
>        Default Gateway : 192.168.1.5
>        Syslog Server   : 192.168.1.1
>        Idle Timeout    : 90 Seconds
>
>
>Everything seems to be connected and working properly...
>
>Thanks in advance for any help.
>Mark
>


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: IMS Netvigator (1:109/42)

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              06-Dec-99 06:01:27
  To: All                                               06-Dec-99 03:38:15
Subj: Re: Networking a HP LaserJet4...

From: James Moe <sma.spam-not@rtd.com>


Kelvin Tsang wrote:
> 
> Why ?  The JetAdmin for OS/2 is comes with the JetDirect.
> Or you may find it easily at HP's homepage :
> http://www.hp.com/cposupport/prodhome/hpjetadmin1877.html

  Yes. The filename is JA105EN.EXE. Seems to be a good release; it
solved the "duplicate print of the first job" problem I had with it, and
generally seems to run faster.
  The installation is crude. Follow the the README instructiosn
slavishly and you'll do OK.

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: nospam.wxperson@pcwp.com                          06-Dec-99 15:24:25
  To: All                                               06-Dec-99 14:17:05
Subj: Lost lan logon

From: nospam.wxperson@pcwp.com

HI,

Is there anyway to recover the LAN logon userid and password for a
workstation?

This is on a backup PC that has not been touched in a year and I lost
that information.

This is for V4.0 of OS2.  Any hidden files, etc..??

Thanks,

George
wx@pcwp.com

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MindSpring Enterprises (1:109/42)

+----------------------------------------------------------------------------+

From: jimburke@ionet.net                                06-Dec-99 16:00:29
  To: All                                               06-Dec-99 14:17:05
Subj: Re: IBM-Etherjet-CardBus Adapter and O2Micro CardbusControler

From: jimburke@ionet.net (Jim Burke)

http://service.software.ibm.com/os2ddpak/html/lanadapt/ibmcorpo/index.htm

Check there for your exact model. The first one has os2 support, but there are 
6 other adaptors that
are listed. 

bakan@-NOSPAM-btzpc3.desy.de (Franz Bakan) wrote:

>I have an ACER TravelMate 513T Notebook and an IBM Etherjet Cardbus
>Adapter.

>It only works in Win9x

>No DOS no OS/2.

>Someone told me that the Drivers do not support the O2Micro
>Cardbus-Chipset which is used in this Notebook (probably OZ6832/OZ6833 Chip)

>Is there any solution to get things going?

>Where to ask the responsable people for the drivers?

>Is there a way to set the PCI-Registers? and what values would be
>necessary?

>Perhaps someone has some answers.


>Franz Bakan


>-- 
> Franz Bakan,  Hamburg,  Germany
> email: bakan@ukezyk.desy.de


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: ioNET Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: ajglass@cpcug.org                                 06-Dec-99 19:09:11
  To: All                                               06-Dec-99 19:57:15
Subj: Re: DSL Not Always On

From: ajglass@cpcug.org (Andrew J. Glass)

In message <384732B3.653FDAB2@ATTGlobal.net> - "Walter S. Rue"
<wsrue@ATTGlobal.net> writes:
:>
:>Maybe I was imagining it, but I was sure that the BellAtlantic rep I
:>spoke with about their DSL service said that OS/2 was supported.  In the
:>install kit they sent, the CD with only Win software on it was the first
:>ominous sign, then the instruction booklets with only Win related
:>instructions in it, finally the voiced denial by their reps when I
:>phoned back to confirm.  
:>
:>They require a special signon after the TCP/IP (DHCP) connection using
:>proprietary software from IVasion named PoET, to be repeated at the
:>beginning of each session (even though the line is non-switched). 
:>IVasion products are exclusively Win9x & NT.  No static IP options.  So
:>much for "always on".
:>
:>Might this signon after all be a standardized process available in the
:>likes of InJoy?  Has anyone else worked around a similar problem?

I've been using DSL from Bell Atlantic for about a year under OS/2 without any
problems. Occasionally, after non-use, it times out; running "setup.exe"
restores it.

All that's involved, really, is a unique ethernet address (which serves as the
"passoword") and the various TCP/IP settings. There are no device drivers. So
the DSL terminal doesn't care what OS is under the hood. I'm running at 1MB,
by the way, with typical thruputs of 80 Mbs.

Of, course, BA won't do this for you; their technies were sufficiently
challenged by Windows NT.


- Andy

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Capital PC Users Group (1:109/42)

+----------------------------------------------------------------------------+

From: jim.danvers@mindex.com                            06-Dec-99 22:03:07
  To: All                                               07-Dec-99 12:14:17
Subj: Re: Networking a HP LaserJet4...

From: Jim Danvers <jim.danvers@mindex.com>

I don't really know a ton about OS/2 (matter 'o fact I don't hardly know
anything about it!), but I have recently installed it on a box @work and
have been playing  / experimenting with it for the last couple of
days....   Anyhow - with respect to your JetAdmin s/w question - I have
heard of many a bad experience with jetadmin in the NT world also (which
is what I deal with @work) - my solution is to use a protocol called
"DLC" to talk to the jetdirect devices that we have on our network.  It
will ~only~ work with jetdirect devices though (w/respect to using it as
a printing protocol).  Bear in mind that DLC is non-routable, so if you
need to access a printer on the other side of a router it ain't gonna
work for you.  I dunno if OS/2 has an equivilent to DLC, but thats my
.02 cents worth anyway.  Hope its good for something....  {shrug
shoulders}

-=- J.D. -=-


Mark Mellin wrote:

> Any ideas on how to connect/configure Warp4 as the print server on
> a HP LaserJet4 using HP's JetDirect card across a 10-BaseT peer
> network with TCP/IP ??
>
> I couldn't & didn't find any JetDirect software for OS/2 on HP's
> or IBM's driver site(s).
>
> My telenet'd config for the Jetdirect card is as follows:
>
> ===JetDirect Telnet Configuration===
>
>         Configured Parameters
>         IP Address      : 192.168.1.5
>         Subnet Mask     : 255.255.255.0
>         Default Gateway : 192.168.1.5
>         Syslog Server   : 192.168.1.1
>         Idle Timeout    : 90 Seconds
>
> Everything seems to be connected and working properly...
>
> Thanks in advance for any help.
> Mark

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: whonea@codenet.net                                06-Dec-99 21:50:27
  To: All                                               07-Dec-99 12:14:18
Subj: Re: Problem setting up network

From: whonea@codenet.net (Will Honea)

On Sun, 5 Dec 1999 22:40:30, "James Eling" <jeling@bigpond.com> wrote:

> My big problem at the moment is one of the machines seems to have a strange
> setup.  The MPTS icon does not appear where it did with the other machines.
> I first thought that maybe it hadn't been installed, until I read that it is
> always installed.  Ilater found the directory and ran the program that way.
> Most of the networking icons are missing.  Why are they missing and what can
> I do to find tham again?

From a command line, run VER /R on the OS/2 machines and post the 
numbers that result.  The solution will depend on what version(s) and 
fixpak levels you have for Warp.  Eventually, you will need to post 
the results of the SYSLEVEL program but this will get started.

Will Honea <whonea@codenet.net>

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: rauscher@odin.botanik.biologie.u...               07-Dec-99 10:07:07
  To: All                                               07-Dec-99 12:14:19
Subj: OS2 in a Microsoft Network

Message sender: rauscher@odin.botanik.biologie.uni-muenchen.de

From: Rauscher Guenter <rauscher@odin.botanik.biologie.uni-muenchen.de>

Dear  OS/2 users,

we have several computers with OS/2 in a large heterogenous network.
Most of the computers are with Win9X or Win311.
To keep ageneral overview, we made several groups in the Microdoft
network. The OS/2 computers are also members of any groups.
But the OS/2 computers see only the computers in the own group because
OS/2 peer services interpretes groups as a domain.
Is there a way to connect to computers in an other group?
It is a funny thing, that one OS/2 computer has a connection to a
windows computer and to a UNIX workstation via samba, which are members
of other groups, becaus the connection was achieved before the groups
were introduced.
Is there any way in the present situation, to achieve a connection to a
computer of an other group?

Thanks in advance

Guenter Rauscher

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Botanik LMU (1:109/42)

+----------------------------------------------------------------------------+

From: mdtaylor@mdtaylor.com                             07-Dec-99 09:39:03
  To: All                                               07-Dec-99 12:14:19
Subj: HELP ON NETWORKING A SCANNER PLEASE!

From: " Michael Dean Taylor" <mdtaylor@mdtaylor.com>

After much help from you kind people I now have a successful network up
and running which allows access to printing.

I have one last problem- how do I network my scanner

I have 3 machines all networked machine A B and C

MachineB has the scanner plugged in via a usb port .
Machine A and C are remote

Is it possible to scan from any machine using photoshop which is installed
on all 3 machines.(A B AND C)

At the momemt machine B (scanner connected to it) scans o.k
but when I try machine A or C- I have a message stating "scanner not
found-cannot initialise"  Etc...

I have set all my drives to share which I presume would cover the twain
drive. and iihave installed the scanner software on all 3 machines.

I am using a hewlett packard scanjet 6200c under a standard windows 98
network using a hub and 3 network cards.

Where am I going wrong iIwould be grateful for any help !!
Thanks
--
*************************
*************************
      E- Mail from:
   Michael Dean Taylor
*************************
 mdtaylor@mdtaylor.com
*************************


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: hellwig@exp.bessy.de                              07-Dec-99 11:21:19
  To: All                                               07-Dec-99 12:14:19
Subj: different TCP/IP configuration

From: Chris Hellwig <hellwig@exp.bessy.de>

Hi,

I have an OS/2 client working in different lan's.
So I have to change the settings like 
- IP address and name
- router
. DNS
- ....

Is there a way to save the settings from tcpcfg in different files, to
have at the end some icons like  STAY_at_place_A, STAY_at_place_B,
STAY_at_place_C & .....

Bye
  Chris

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           07-Dec-99 14:56:13
  To: All                                               07-Dec-99 16:53:18
Subj: Re: OS2 in a Microsoft Network

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Tue, 7 Dec 1999 09:07:15, Rauscher Guenter 
<rauscher@odin.botanik.biologie.uni-muenchen.de> wrote:

> Dear  OS/2 users,
> 
> we have several computers with OS/2 in a large heterogenous network.
> Most of the computers are with Win9X or Win311.
> To keep ageneral overview, we made several groups in the Microdoft
> network. The OS/2 computers are also members of any groups.
> But the OS/2 computers see only the computers in the own group because
> OS/2 peer services interpretes groups as a domain.
> Is there a way to connect to computers in an other group?
> It is a funny thing, that one OS/2 computer has a connection to a
> windows computer and to a UNIX workstation via samba, which are members
> of other groups, becaus the connection was achieved before the groups
> were introduced.
> Is there any way in the present situation, to achieve a connection to a
> computer of an other group?
> 

There is a parameter in the IBMLAN.INI file that allows
the requester to see other domains. The additional domains
or groups are set up in a comma separated list.

othdomains = freds, ibmpeers, research, etc, etc

The IBMLAN.INI file lives in the \IBMLAN directory.

Edit the file, stop the requester, start it again, and see
if you can connect to the various groups.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: noone@llondel.demon.co.uk                         07-Dec-99 09:18:06
  To: All                                               07-Dec-99 16:53:18
Subj: Re: Networking a HP LaserJet4...

From: "Dave {Reply Address in.sig}" <noone@llondel.demon.co.uk>

On Mon, 06 Dec 1999 00:47:43 GMT, Mark Mellin wrote:

>Any ideas on how to connect/configure Warp4 as the print server on
>a HP LaserJet4 using HP's JetDirect card across a 10-BaseT peer
>network with TCP/IP ??
>
>I couldn't & didn't find any JetDirect software for OS/2 on HP's
>or IBM's driver site(s).
>
It's hidden in with the JetAdmin stuff. JA105EN.EXE or something like
that, IIRC. Works fine here, I've got a LaserJet4M+ which will talk to
OS/2 machines, a Windoze95 machine (when it's switched on) and a Mac,
all on the same network.

As an aside, did anyone notice that HP have discontinued decent
JetAdmin support for OS/2 - you have to have an NT server on your
system to run the newer OS/2 JetAdmin. I couldn't find a suitable HP
contact to complain to in the notifying email :-( Not that I use it
anyway...

 
Dave
-- 
mail da ve@llondel.demon.co.uk
http://www.llondel.demon.co.uk
Give blood... Play Rugby!


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: the bus stop (1:109/42)

+----------------------------------------------------------------------------+

From: ktkelvin@yahoo.com                                08-Dec-99 00:45:26
  To: All                                               07-Dec-99 16:53:18
Subj: Re: Networking a HP LaserJet4...

From: "Kelvin Tsang" <ktkelvin@yahoo.com>

Dave {Reply Address in.sig} <noone@llondel.demon.co.uk> wrote in message
news:abbaryybaqryqrzbapbhx.fmdjqds.pminews@sharra.llondel.demon.co.uk...
> On Mon, 06 Dec 1999 00:47:43 GMT, Mark Mellin wrote:
>
> As an aside, did anyone notice that HP have discontinued decent
> JetAdmin support for OS/2 -
> you have to have an NT server on your system to run
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Dave, what do you mean ?
Is that mean the new JetAdmin/2 will detect the existence
of NT Server to work ?

I'm using the bundled OS/2 driver of JetDirect 500x, and
am planning to upgrade to the lastest one, if any.

Kelvin



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Still an OS/2 fan ! (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           07-Dec-99 15:06:20
  To: All                                               07-Dec-99 16:53:18
Subj: Re: HELP ON NETWORKING A SCANNER PLEASE!

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Tue, 7 Dec 1999 09:39:06, " Michael Dean Taylor" 
<mdtaylor@mdtaylor.com> wrote:

> 
> After much help from you kind people I now have a successful network up
> and running which allows access to printing.
> 
> I have one last problem- how do I network my scanner
> 
> I have 3 machines all networked machine A B and C
> 
> MachineB has the scanner plugged in via a usb port .
> Machine A and C are remote
> 
> Is it possible to scan from any machine using photoshop which is installed
> on all 3 machines.(A B AND C)
> 
> At the momemt machine B (scanner connected to it) scans o.k
> but when I try machine A or C- I have a message stating "scanner not
> found-cannot initialise"  Etc...
> 
> I have set all my drives to share which I presume would cover the twain
> drive. and iihave installed the scanner software on all 3 machines.
> 
> I am using a hewlett packard scanjet 6200c under a standard windows 98
> network using a hub and 3 network cards.
> 
> Where am I going wrong iIwould be grateful for any help !!
> Thanks

This is an OS/2 newsgroup not a Windows newsgroup.
You should really be posting these items to one
of the Windows newsgroups.

Sharing a "drive" has nothing to do with sharing the
scanner hardware. Windows 98 won't even share
a modem, so I doubt that sharing a scanner is
possible either.

There is nothing in the standard Windows
networking that allows you to share
a scanner between machines.

The TWAIN drivers assume the presence of the
scanner on the local machine. I don't think anyone
has written a TWAIN "scanner on a network" driver.
It's possible to do it, I just don't think anyone has
done it.

You could buy a USB hub and plug the scanner
and all three machines into that. The USB protocols
are supposed to allow this type of sharing.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: james.arnold@!!!usa.net                           07-Dec-99 17:03:12
  To: All                                               07-Dec-99 16:53:18
Subj: Re: OS2 in a Microsoft Network

From: james.arnold@!!!usa.net

In <qpkdVVNoMoTk-pn2-Wudqmx7mqKGo@tcpserver>, lsunley@mb.sympatico.ca (Lorne
Sunley) writes:
>On Tue, 7 Dec 1999 09:07:15, Rauscher Guenter 
><rauscher@odin.botanik.biologie.uni-muenchen.de> wrote:
>
>> Dear  OS/2 users,
>> 
>> we have several computers with OS/2 in a large heterogenous network.
>> Most of the computers are with Win9X or Win311.
>> To keep ageneral overview, we made several groups in the Microdoft
>> network. The OS/2 computers are also members of any groups.
>> But the OS/2 computers see only the computers in the own group because
>> OS/2 peer services interpretes groups as a domain.
>> Is there a way to connect to computers in an other group?
>> It is a funny thing, that one OS/2 computer has a connection to a
>> windows computer and to a UNIX workstation via samba, which are members
>> of other groups, becaus the connection was achieved before the groups
>> were introduced.
>> Is there any way in the present situation, to achieve a connection to a
>> computer of an other group?
>> 
>
>There is a parameter in the IBMLAN.INI file that allows
>the requester to see other domains. The additional domains
>or groups are set up in a comma separated list.
>
>othdomains = freds, ibmpeers, research, etc, etc
>
>The IBMLAN.INI file lives in the \IBMLAN directory.
>
>Edit the file, stop the requester, start it again, and see
>if you can connect to the various groups.
>
>--
>
>Lorne Sunley

        You can also use the "net use" command. This will work for any valid
machine on your net no matter what the workgroup name is.

        Type "net help use" and "net help view" for maore information, also
check the OS/2 Warp Command reference.

        If you want the network resources every time you boot your machine you
could make a command file that runs from the startup folder to start the
requester, log you on and connect to the resources that you want. You could
alternatively put the commands in "startup.cmd" in the root directory of your
boot drive.

        Frankly I find it much nice not to be able to see everything on the
local network. Ever tried opening up the Winxx Network Neighbourhood when
there are over a couple of hundred workgroups? Its really painfull.

        Jim


===========================================================================
remove !!! for e-mail
James Arnold                                email:    james.arnold@usa.net
                                              ICQ:    9719182

        Member Toronto OS/2 User Group

Brought to you by the letters O S the number 2 and NR/2
===========================================================================

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sympatico (1:109/42)

+----------------------------------------------------------------------------+

From: bm_ptx@my-deja.com                                08-Dec-99 04:46:19
  To: All                                               08-Dec-99 03:27:26
Subj: Internet sharing, with different OS

From: bm_ptx@my-deja.com

Hi,

Currently I have two PCs in my home. One using Win98, one OS/2. Now only
the Win98 PC is subscribed to a broadband network access (somewhat a
proprietary interface by Hong Kong Telecom, I'm afraid), and I'd like to
have my OS/2 system to share the connection.

1) Is Internet sharing between Win98 and OS/2 possible, using Win98 as
server? Even solutions of plain modem internet access is welcome,
I'd like to know the possibilities (The proprietary broadband doesn't
have a program for OS/2 to trigger the internet access, anyway)

2) What softwares on these two PCs should I use? The problem is, it
seems that I can't find any internet sharing software (Wingate,
GateKeeper, etc.) that have cross-platform capabilities.

3) What changes on the network do I need? I'm currently using TCP/IP.

Thanks a lot!

Regards,
Tony Pang


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           08-Dec-99 06:04:01
  To: All                                               08-Dec-99 03:27:26
Subj: Re: Internet sharing, with different OS

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Wed, 8 Dec 1999 04:46:39, bm_ptx@my-deja.com wrote:

> Hi,
> 
> Currently I have two PCs in my home. One using Win98, one OS/2. Now only
> the Win98 PC is subscribed to a broadband network access (somewhat a
> proprietary interface by Hong Kong Telecom, I'm afraid), and I'd like to
> have my OS/2 system to share the connection.
> 
> 1) Is Internet sharing between Win98 and OS/2 possible, using Win98 as
> server? Even solutions of plain modem internet access is welcome,
> I'd like to know the possibilities (The proprietary broadband doesn't
> have a program for OS/2 to trigger the internet access, anyway)
> 
> 2) What softwares on these two PCs should I use? The problem is, it
> seems that I can't find any internet sharing software (Wingate,
> GateKeeper, etc.) that have cross-platform capabilities.
> 
> 3) What changes on the network do I need? I'm currently using TCP/IP.
> 

As long as the Win98 box has some software on it that will serve
as a NAT gateway, like Wingate, you can access the internet 
from the OS/2 box. The gateway software will have to run on
the Win98 box if the proprietary access program for the
broadband connection will only run on Windows.

<ADVOCACY ALERT>
You should register a strong objection with the ISP
at their lack of support of platforms other than Windows. 
This is  beginning to look like some kind of restraint of trade
on the part of some ISP's. There appears to be some kind
of conspiracy to keep Linux, OS/2, BeOS and any
other operating system except Windows from having
broadband Internet Access
</ADVOCACY ALERT>

The OS/2 box will need TCP/IP set up for it's LAN card
and the Win98 box and the OS/2 box will have to be
connected on a LAN.

The OS/2 TCP/IP setup will have the default router (gateway)
set to the private IP address that is assigned to the
WIN 98 box. DNS addresses will be those assigned
by the ISP. The OS/2 box will have a private IP
address assigned.

The Windows 98 box may need two NICs to
provide for connection to the broadband internet
and the LAN. Each NIC on the Windows 98 box
will have to have the TCP/IP protocol installed.

Windows LAN NIC
IP address 10.1.1.1

OS/2 LAN NIC
IP address 10.1.1.2
router(gateway) default 10.1.1.1

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: jknott@ibm.net                                    08-Dec-99 05:50:27
  To: All                                               08-Dec-99 10:20:01
Subj: Re: different TCP/IP configuration

From: jknott@ibm.net (James Knott)

In article <384CDFB3.DB3BE0F@exp.bessy.de>,
Chris Hellwig <hellwig@exp.bessy.de> wrote:
>Hi,
>
>I have an OS/2 client working in different lan's.
>So I have to change the settings like 
>- IP address and name
>- router
>. DNS
>- ....
>
>Is there a way to save the settings from tcpcfg in different files, to
>have at the end some icons like  STAY_at_place_A, STAY_at_place_B,
>STAY_at_place_C & .....

The IP address and router info is stored in \mptn\bin\setup.cmd.  The 
DNS info is stored in \mptn\etc\resolv2.  To use different OS/2 at 
different sites, just replace these files.  I have my computer 
configured to select location at bootup.  I change the setup.cmd file,
lan logon commands and network drivers, but not resolve file.

-- 
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: uno@40th.com                                      08-Dec-99 16:40:25
  To: All                                               08-Dec-99 14:48:04
Subj: Re: Internet sharing, with different OS

From: uno@40th.com (uno@40th.com)

Lorne Sunley? (lsunley@mb.sympatico.ca?) wrote (Wed, 08 Dec 1999 06:04:03
GMT):
>You should register a strong objection with the ISP
>at their lack of support of platforms other than Windows.

This might explain why they do it:

 http://www.statmarket.com/SM?c=Operating_System


 '`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'
 Corne1 Huth     http://40th.com/      Bullet database engines/servers

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Yanaguana (1:109/42)

+----------------------------------------------------------------------------+

From: noone@llondel.demon.co.uk                         08-Dec-99 20:35:01
  To: All                                               08-Dec-99 19:54:20
Subj: Re: Networking a HP LaserJet4...

From: "Dave {Reply Address in.sig}" <noone@llondel.demon.co.uk>

On Wed, 8 Dec 1999 00:45:52 -0000, Kelvin Tsang wrote:

>
>Dave {Reply Address in.sig} <noone@llondel.demon.co.uk> wrote in message
>news:abbaryybaqryqrzbapbhx.fmdjqds.pminews@sharra.llondel.demon.co.uk...
>> On Mon, 06 Dec 1999 00:47:43 GMT, Mark Mellin wrote:
>>
>> As an aside, did anyone notice that HP have discontinued decent
>> JetAdmin support for OS/2 -
>> you have to have an NT server on your system to run
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>Dave, what do you mean ?
>Is that mean the new JetAdmin/2 will detect the existence
>of NT Server to work ?
>
Part of an email I received from HP, dated 11th October:

----------------------------------------------------------------
3. HP JetAdmin discontinuance notice
----------------------------------------------------------------
The simple installation tools for printer and print server installation

and HP Web JetAdmin for management, troubleshooting, and diagnostics
have 
become more powerful and simpler to use than HP JetAdmin. HP will
continue 
to invest and expand functionality with simple installation tools and
HP 
Web JetAdmin. As a result, this evolution and continual improvement
process 
allows HP to begin a discontinuance process for the HP JetAdmin family 
of software products listed below effective February 1, 2000:
 
* HP JetAdmin Version 2.7 for Microsoft Windows 3.1x 
* HP JetAdmin Version 3.4x for Microsoft Windows 95/98 
* HP JetAdmin Version 3.4x for Microsoft Windows NT
* HP JetAdmin Version D.06x for HP-UX 10x and 11x 
* HP JetAdmin Version D.06x for Sun Solaris 
* HP JetAdmin Version A.04x for IBM OS/2 

HP encourages customers to take advantage of the many benefits of HP
Web 
JetAdmin and the Simple Installation Tools by migrating to these robust

solutions at the earliest possible convenience. At the same time, HP
will 
provide full support of JetAdmin until January 31, 2002 to ensure ample

time to complete this transition. HP Web JetAdmin 5.6 is currently
available 
in English, French, Italian, German, Spanish, and Japanese. In the near

future HP will release new versions of Web JetAdmin that will also be 
available in Czech, Korean, Polish, Portuguese, Russian, Simplified
Chinese 
and Traditional Chinese.

For more information on HP JetAdmin discontinuance and the extended
support 
timeline, please visit: 

     http://network-printing.com/Key=1674.M5m.D.g3aQ9

===========================================================

When I went looking for OS/2 versions of the Web JetAdmin, I discovered
from the HP website that:

>>HP Print Server Manager, along with HP Web JetAdmin, provide the
>>ability to install, configure, manage, and troubleshoot TCP/IP connected
>>devices on an intranet. For this support, HP Web JetAdmin 5.6 must be
>>installed on a Windows NT 4.0 PC (Workstation or Server) and HP Print
>>Server Manager must be installed on an OS/2 server.

(on http://www.hp.com/cposupport/networking/software/hppsosen.exe.html
)

I don't know what level of support you get without the NT machine but I
think it's bad that there isn't a native OS/2 equivalent.


Dave
-- 
mail da ve@llondel.demon.co.uk
http://www.llondel.demon.co.uk
Give blood... Play Rugby!


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: the bus stop (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           08-Dec-99 18:55:19
  To: All                                               08-Dec-99 19:54:20
Subj: Re: Internet sharing, with different OS

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Wed, 8 Dec 1999 16:40:51, uno@40th.com (uno@40th.com) wrote:

> 
> Lorne Sunley? (lsunley@mb.sympatico.ca?) wrote (Wed, 08 Dec 1999 06:04:03
GMT):
> >You should register a strong objection with the ISP
> >at their lack of support of platforms other than Windows.
> 
> This might explain why they do it:
> 
>  http://www.statmarket.com/SM?c=Operating_System
> 

<RANT>
I suppose it does explain it, but locking people out
of broadband access because Windows has
proprietary access techniques, that of course
cannot be implemented in another OS, is still
an ugly restraint of user choice. Given the way
Microsoft is buying up cable TV providers
(who also provide broadband internet access)
people will be forced to pay yet another Microsoft
tax. "We're sorry sir, even though your servers
run Unix, you have to connect to our service
through Windows".
</RANT>

I suppose it's too difficult just to implement
standard TCP/IP connectivity. Instead you
have to have MSN/IP the new "extended"
standard.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: slindsey@facstaff.wisc.edu                        08-Dec-99 18:52:22
  To: All                                               08-Dec-99 19:54:20
Subj: File & Print Client won't install

From: slindsey@facstaff.wisc.edu

I can't get the File & Print Client in Warp 4 to install.  I've tried
installing it repeatedly but the Network icon does not show up under
Connections and when I go back in to Selective Install for Networks the
client is listed as NOT installed.  I've read mention of this problem
on other web pages but no details on a solution were given (something
to do with the config.sys file).  Any suggestions?  Please email as
well as post.

Thanks
-Scott
slindsey@facstaff.wisc.edu


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: eickhsr@jm-usa.com                                08-Dec-99 15:00:15
  To: All                                               08-Dec-99 19:54:20
Subj: Injoy Firewall logging

From: Stephen Eickhoff <eickhsr@jm-usa.com>


Bjarne Jensen wrote:

> >IMHO, less people would be confused if the standard version
> >was called  "InJoy Gateway" and the professional version
> >"InJoy Firewall".
>
> Originally it was actually called the InJoy Gateway, but
> that gave a lot of confusion too. One problem was that a
> top-level name was needed to cover both versions (of the
> same program) and we didn't want two sets of docs, web and
> purchase options.
>
> > Another thing which I found very confusing is the system of
> >multiple config files (there are seven of them I believe).
> >First of all, IJF  doesn't tell you which files it reads;
>
> The documentation clarifies what files to use and even the
> comments in the top of the files tell fairly clear what they
> are used for..

But the product doesn't behave as documented. (see below)

>
> >then, if you put the commands in the wrong file, it doesn't
> >produce error messages, it simply ignores the misplaced
> >commands!
>
> That would be because your file included the information
> needed by the firewall, so the firewall doesn't read the
> rest of the file looking for displaced firewall rules.
> If you put rules into files, by random, then you are
> gonna get into problems with a lot of software though..
>

I don't have trouble with this. I usually get a .err if I do mess up.
That works pretty well.

My problem is that I have logging control = disabled on all my rules,
yet the hard drive goes constantly whenever the firewall is accessed,
and the log shows every single transaction! I suppose it's logging
everything _but_ my rules. Can't I shut ALL logging off, or just log
certain ports? This poor P90 is killing my Tribes connection ;-)

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: UUNET WorldCom server (post doesn't reflect views
(1:109/42)

+----------------------------------------------------------------------------+

From: uno@40th.com                                      08-Dec-99 20:00:12
  To: All                                               08-Dec-99 19:54:20
Subj: Re: Internet sharing, with different OS

From: uno@40th.com (uno@40th.com)

All it really is is that everyone 'cept a few are using MS, and buying into
MS, and so long as everything is peachy with MS, OS2 and anything else is
remains but a footnote (if even that).  Anyway, it's all holding up...

 http://www.billparish.com/msftfraudfacts.html

Lorne Sunley? (lsunley@mb.sympatico.ca?) wrote (Wed, 08 Dec 1999 18:55:39
GMT):
><RANT>
?
></RANT>
-- 
 '`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'`'
 Corne1 Huth     http://40th.com/      Bullet database engines/servers

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Yanaguana (1:109/42)

+----------------------------------------------------------------------------+

From: jcbls@worldnet.att.net                            08-Dec-99 14:59:26
  To: All                                               08-Dec-99 19:54:20
Subj: TOKEN-RING AND ETHERNET WITH NT-OS2

From: "JCBLS" <jcbls@worldnet.att.net>

This is a multi-part message in MIME format.

------=_NextPart_000_001F_01BF418C.E16988C0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

I have a Token-Ring Network and Novel Server, I am connecting from OS/2 Warp 4 
Client fine.
But I want to connect the OS/2 client to another Server that is NT, which have 
one NIC card Olicom Token-Ring for the Novel Network and Another NIC that is
3COM Ethernet PCI for the Ethernet OS/2 clients.

How I go around, because I don't have much luck at this point.

Thanks,

JCBLS

------=_NextPart_000_001F_01BF418C.E16988C0
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2314.1000" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>
<DIV><FONT size=2>I have a Token-Ring Network and Novel Server,&nbsp;I am 
connecting from OS/2 Warp 4 Client fine.</FONT></DIV>
<DIV><FONT size=2>But I want to connect the OS/2 client to another Server that 

is&nbsp;NT, which have one NIC card Olicom Token-Ring for the Novel Network
and 
Another NIC that is 3COM Ethernet PCI for the Ethernet OS/2 
clients.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=2>How I go around, because I don't have much luck at this 
point.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=2>Thanks,</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT size=2>JCBLS</FONT></DIV></FONT></DIV></BODY></HTML>

------=_NextPart_000_001F_01BF418C.E16988C0--

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: AT&T WorldNet Services (1:109/42)

+----------------------------------------------------------------------------+

From: alex@eddie.cis.uoguelph.ca                        08-Dec-99 20:46:05
  To: All                                               08-Dec-99 19:54:21
Subj: UPM installed without File and Print Client?

From: alex@eddie.cis.uoguelph.ca (Alex Taylor)

I've run up against something interesting with two of the OS/2 machines I
maintain here at work.  These machines were put in place before I started
here, and are in a very closed production environment, so I don't get to
poke around them all that much.

Basically, User Profile Management services seems to be installed on them,
but the File and Print Client is not.  I didn't think this was possible.

I was trying to install UPM service pack IP08406 on them (as Y2K is coming
up and this contains a few fixes for UPM, Peer, etc.).  However, the CSF
claimed it could find no products available to service.  That's funny, I
thought to myself, and checked SYSLEVEL.  UPM is listed as installed,
level WR08000.

I tried several tricks for installing, but the CSF refused.  I then
noticed that the IBMLAN directory does not exist.  Curious, I loaded up
Selective Install for Networking, and, sure enough, beside "File and Print
Client" it says "not installed".

My question is: under what circumstances can UPM get installed without the
File and Print Client?  And do I need to install FP&C in order to apply
service to UPM?

This machine runs DB/2, Personal Communications, and a few other things.
DB/2 and the 'other things' require UPM and the user accounts database to
function, but the LAN client and peer services are not needed.  I am
anxious to get UPM Y2K compliant, however, so I need to install IP08406.

Any suggestions?

Thanks...
-- 
-----------------------------------------------------------------
 Alex Taylor                  BA - CIS - University of Guelph
 alex@eddie.cis.uoguelph.ca   http://eddie.cis.uoguelph.ca/~alex
-----------------------------------------------------------------

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network Canada (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           08-Dec-99 21:41:18
  To: All                                               08-Dec-99 19:54:21
Subj: Re: UPM installed without File and Print Client?

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Wed, 8 Dec 1999 20:46:11, alex@eddie.cis.uoguelph.ca (Alex Taylor) 
wrote:

> 
> My question is: under what circumstances can UPM get installed without the
> File and Print Client?  And do I need to install FP&C in order to apply
> service to UPM?
> 
> This machine runs DB/2, Personal Communications, and a few other things.
> DB/2 and the 'other things' require UPM and the user accounts database to
> function, but the LAN client and peer services are not needed.  I am
> anxious to get UPM Y2K compliant, however, so I need to install IP08406.
> 

DB2 installs UPM so that it can have a place to keep
the logon ID's and passwords for the DB2 users.

I have no idea if this is updated by the DB2 fixpacks or not.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             08-Dec-99 18:24:11
  To: All                                               08-Dec-99 21:21:26
Subj: Apache 1.2.4 problem

From: Scott Vetter <svetter@ameritech.net>

I'm just starting to work with web servers on my OS/2 V4 system.  When I
start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
determine the IP address of the specified ServerName (127.0.0.1)".  The
address (127.0.0.1) is defined to my system as a local host in the
TCP/IP configuration.  What's wrong?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: hemo_jr@attglobal.net                             08-Dec-99 17:50:09
  To: All                                               08-Dec-99 21:21:26
Subj: Re: Remote Control of Remote Systems

From: hemo_jr@attglobal.net (Matt Hickman)

In <384EE9D7.B9437FBC@ameritech.net>, on 12/08/99 
   at 06:29 PM, Scott Vetter <svetter@ameritech.net> said:

>   Just wondering, but is that the same Netfinity that comes with OS/2 or
>do you have to buy an add-on product?  If the first case is true, how do

IIRC, the Netfinity which comes with OS/2 is at a lower rev level and may
have fewer features.  AFAIK it contains remote control.

The latest and most full featured version is Netfinity Manager 5.2.2(?)
and is available from the PC company.  If you get to the point where you
rely on the product and require support, then buy the retail product.

-- 
Matt Hickman  
  The entire universe ... is wildly unlikely to the point of
  ridiculousness.  Therefore, we of Rargyll know that God
  is a humorist.
                  Robert A. Heinlein (1907 - 1988)
                 _The Star Beast_  c. 1954

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             08-Dec-99 18:25:25
  To: All                                               08-Dec-99 21:21:26
Subj: Bind for OS/2

From: Scott Vetter <svetter@ameritech.net>

    I've downloaded and installed Bind/8 for OS/2 and I'm using OS/2 V4,
however the documentation does not tell me how to get Bind to interface
with OS/2.  How does one do this?

Thanks

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             08-Dec-99 18:29:13
  To: All                                               08-Dec-99 21:21:26
Subj: Re: Remote Control of Remote Systems

From: Scott Vetter <svetter@ameritech.net>

   Just wondering, but is that the same Netfinity that comes with OS/2 or do
you
have to buy an add-on product?  If the first case is true, how do you go anout
setting up and using it?

Roland Pinches wrote:

> If you are after a viewer for OS/2 try PMVNC. It allows you to view
> Windows/Linux + other O/S as if it were your local desktop. Unfortunately
> there isn't currently an OS/2 VNC Server available, so you can only use OS/2
> to view other O/S desktops :-(
>
> I've used Netfinity and while it is ok over a LAN, if you try it over a slow
> kilostream link (up to 64k/bps) it's a pig! VNC is very much quicker due to
> the way it works.
>
> Not sure of the location to download the software, but I can find it if
> you're interested...
>
> Roly.
>
> On Thu, 18 Nov 1999 22:20:18 GMT, Matt Hickman wrote:
>
> >In article <382F06F7.C1AAA059@rwg.de>,
> >  Stefan Hoenes <stefan.hoenes-remove-@rwg.de> wrote:
> >>
> >>
> >> "Matthew A. Jones" schrieb:
> >> >
> >> >
> >> > Does anyone know of any products available similar in design to
> >> > PCAnywhere that works with OS/2 Warp 3.0.
> >> >
> >> I know 3 products: DCAF from IBM  (works only with OS/2),
> >> PolyPM  and  NetOP
> >
> >Note: PolyPM is now "Remote Managment Professional" and DCAF is part of
> >the Netfinity Manger product from the IBM PC company.
> >
> >--
> >Matt Hickman
> >I don't even see how a four-dimensional coffee cup
> >could even hold coffee, much less a whole galaxy.
> >              - Robert A. Heinlein (1907-1988)
> >
> >
> >Sent via Deja.com http://www.deja.com/
> >Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: Roland.Pinches@pmail.net                          09-Dec-99 00:52:25
  To: All                                               09-Dec-99 03:31:04
Subj: Re: Remote Control of Remote Systems

From: "Roland Pinches" <Roland.Pinches@pmail.net>

The version of Netfinity I was using came with Warp Server and its was called
System View. Because System View was so shite, IBM gave a free upgrade to
Netfinity Server 4.0, which was better but not great. We actually bought
TME10 Netfinity 5.0 as an upgrade and made extensive use of the Remote
Workstation Control (RWC) functionality. Version 5 was, IMHO, much better
than version 4.

TME 10 Netfinity comes in two parts, the Manager part and the Services part.
I'm not sure if the full product comes with the OS/2 client or just the
'services' part. You need the Manager part to be able to take control of a
remote workstation.

Roly.

On Wed, 08 Dec 1999 18:29:27 -0500, Scott Vetter wrote:

>   Just wondering, but is that the same Netfinity that comes with OS/2 or do
you
>have to buy an add-on product?  If the first case is true, how do you go
anout
>setting up and using it?
>
>Roland Pinches wrote:
>
>> If you are after a viewer for OS/2 try PMVNC. It allows you to view
>> Windows/Linux + other O/S as if it were your local desktop. Unfortunately
>> there isn't currently an OS/2 VNC Server available, so you can only use
OS/2
>> to view other O/S desktops :-(
>>
>> I've used Netfinity and while it is ok over a LAN, if you try it over a
slow
>> kilostream link (up to 64k/bps) it's a pig! VNC is very much quicker due to
>> the way it works.
>>
>> Not sure of the location to download the software, but I can find it if
>> you're interested...
>>
>> Roly.
>>
>> On Thu, 18 Nov 1999 22:20:18 GMT, Matt Hickman wrote:
>>
>> >In article <382F06F7.C1AAA059@rwg.de>,
>> >  Stefan Hoenes <stefan.hoenes-remove-@rwg.de> wrote:
>> >>
>> >>
>> >> "Matthew A. Jones" schrieb:
>> >> >
>> >> >
>> >> > Does anyone know of any products available similar in design to
>> >> > PCAnywhere that works with OS/2 Warp 3.0.
>> >> >
>> >> I know 3 products: DCAF from IBM  (works only with OS/2),
>> >> PolyPM  and  NetOP
>> >
>> >Note: PolyPM is now "Remote Managment Professional" and DCAF is part of
>> >the Netfinity Manger product from the IBM PC company.
>> >
>> >--
>> >Matt Hickman
>> >I don't even see how a four-dimensional coffee cup
>> >could even hold coffee, much less a whole galaxy.
>> >              - Robert A. Heinlein (1907-1988)
>> >
>> >
>> >Sent via Deja.com http://www.deja.com/
>> >Before you buy.
>



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           09-Dec-99 03:14:29
  To: All                                               09-Dec-99 03:31:04
Subj: Re: Apache 1.2.4 problem

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Wed, 8 Dec 1999 23:24:22, Scott Vetter <svetter@ameritech.net> 
wrote:

> I'm just starting to work with web servers on my OS/2 V4 system.  When I
> start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> determine the IP address of the specified ServerName (127.0.0.1)".  The
> address (127.0.0.1) is defined to my system as a local host in the
> TCP/IP configuration.  What's wrong?
> 

Do you have an entry in the \mptn\etc\hosts file
for 127.0.0.1 that has the host name of your machine?

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         09-Dec-99 00:11:13
  To: All                                               09-Dec-99 05:20:03
Subj: Re: Apache 1.2.4 problem

From: Fujiha <peterpan@mail2.dgraph.com>

Scott Vetter wrote:
> 
> I'm just starting to work with web servers on my OS/2 V4 system.  When I
> start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> determine the IP address of the specified ServerName (127.0.0.1)".  The
> address (127.0.0.1) is defined to my system as a local host in the
> TCP/IP configuration.  What's wrong?

ServerName should be localhost

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         09-Dec-99 00:15:08
  To: All                                               09-Dec-99 05:20:03
Subj: Re: Bind for OS/2

From: Fujiha <peterpan@mail2.dgraph.com>

Scott Vetter wrote:
> 
>     I've downloaded and installed Bind/8 for OS/2 and I'm using OS/2 V4,
> however the documentation does not tell me how to get Bind to interface
> with OS/2.  How does one do this?
> 
> Thanks

What do you mean?
All you need to do is to create your zone files and start named.
Logging (if configured) is handled by the syslog daemon
The install also creates a folder with action icons

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: donnelly@tampabay.rr.com                          09-Dec-99 17:44:19
  To: All                                               09-Dec-99 15:31:04
Subj: Re: Bind for OS/2

From: donnelly@tampabay.rr.com (Buddy Donnelly)

On Wed, 8 Dec 1999 23:25:51, Scott Vetter <svetter@ameritech.net> 
wrote:

>     I've downloaded and installed Bind/8 for OS/2 and I'm using OS/2 V4,
> however the documentation does not tell me how to get Bind to interface
> with OS/2.  How does one do this?

Didn't your distribution have a file named SETUP.OS2? I've quoted it 
all, below.

-- 

Good luck,

Buddy

Buddy Donnelly
donnelly@tampabay.rr.com

------------SETUP.OS2
Quick setup guide for a caching-only server
-------------------------------------------

prereqs:
  OS/2 version ?.?? or higher
  TCP/IP version ?.?? or higher
  EMX runtime version 0.9c or higher
  HPFS

move the folowing files to a directory in your path:
  named.exe
  named-xfer.exe
  emxkill.exe
  ndc.cmd

optionally, you may also want to put the following tools in
the same directory:
  nslookup.exe
  dig.exe
  dnsquery.exe
  host.exe
  addr.exe
  nsupdate.exe
  nssig.cmd

move the following file to your ETC directory
  nslookup.help

make a copy of the sample conf file in your ETC directory
  cd %ETC%
  copy y:\xxx\bind\etc\samples\named.conf 

create a database directory in your ETC directory
  md namedb

switch to the database directory
  cd namedb

copy database files into it
  copy y:\xxx\bind\etc\samples\127.0.0.zone
  copy y:\xxx\bind\etc\samples\root.hint
  copy y:\xxx\bind\etc\samples\localhost.zone
  copy y:\xxx\bind\etc\samples\bogus.zone

edit named.conf and update the directory option

start the server
  ndc start


Thanks a lot to Ed Tomlinson <tomlins@cam.org> for this guide.


bjorn@mork.no
May 03 1998

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RoadRunner - TampaBay (1:109/42)

+----------------------------------------------------------------------------+

From: cmhall@umich.edu                                  09-Dec-99 18:39:16
  To: All                                               09-Dec-99 15:31:04
Subj: Error 58 trying to net view Mac share (Dave OR Apple Share)

From: cmhall@umich.edu (Chris Hall)

We've got a local peer network going which works very well. I have both
netbios and netbios over tcp/ip enabled, and can view and share resources
on OS/2 and Win95 machines. However, a Mac running either Dave or
Apple Share won't even let me view what shares are available, let alone
provide a password. Error message is 58, meaning that the machine cannot
provide the requested service. Running Warp 4, FP12, Lan & Prot services at
8423, TCP/IP at 8423, Net Services and Peer at 8400, Lan Req. at 8406. Anyone
out there been successful in a peer relationship with a Mac have any ideas
for configuring things so we can at least see what's available?

Chris Hall  (cmhall@umich.edu)
Dept. of Geological Sciences, U. of Michigan
"They use Microsoft Excel to plot their data. Sometimes they get the results
they expect, sometimes they don't."   from Microsoft TV commercial, 1999.


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: alex@eddie.cis.uoguelph.ca                        09-Dec-99 19:03:04
  To: All                                               09-Dec-99 15:31:04
Subj: Re: UPM installed without File and Print Client?

From: alex@eddie.cis.uoguelph.ca (Alex Taylor)

On Wed, 08 Dec 1999 21:41:37 GMT, Lorne Sunley <lsunley@mb.sympatico.ca>
wrote:
> > My question is: under what circumstances can UPM get installed without the
> > File and Print Client?  And do I need to install FP&C in order to apply
> > service to UPM?
> > 
> > This machine runs DB/2, Personal Communications, and a few other things.
> > DB/2 and the 'other things' require UPM and the user accounts database to
> > function, but the LAN client and peer services are not needed.  I am
> > anxious to get UPM Y2K compliant, however, so I need to install IP08406.
> 
> DB2 installs UPM so that it can have a place to keep
> the logon ID's and passwords for the DB2 users.

I wondered if this was it.  Thanks...

> I have no idea if this is updated by the DB2 fixpacks or not.

Doesn't look like it, skimming through the ARAR lists.  Hmm.

-- 
-----------------------------------------------------------------
 Alex Taylor                  BA - CIS - University of Guelph
 alex@eddie.cis.uoguelph.ca   http://eddie.cis.uoguelph.ca/~alex
-----------------------------------------------------------------

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network Canada (1:109/42)

+----------------------------------------------------------------------------+

From: alex@eddie.cis.uoguelph.ca                        09-Dec-99 19:01:05
  To: All                                               09-Dec-99 22:41:11
Subj: Re: File & Print Client won't install

From: alex@eddie.cis.uoguelph.ca (Alex Taylor)

On Wed, 08 Dec 1999 18:52:44 GMT, slindsey@facstaff.wisc.edu
<slindsey@facstaff.wisc.edu> wrote:
> I can't get the File & Print Client in Warp 4 to install.  I've tried
> installing it repeatedly but the Network icon does not show up under
> Connections and when I go back in to Selective Install for Networks the
> client is listed as NOT installed.  I've read mention of this problem
> on other web pages but no details on a solution were given (something
> to do with the config.sys file).  Any suggestions?  Please email as
> well as post.

Try making sure CONFIG.SYS contains no lines greater than 250 characters
in length.  This includes lines which are rem'd out.  The LAN client
installer has a serious bug which causes installation to fail if any line
in the file is longer.

-- 
-----------------------------------------------------------------
 Alex Taylor                  BA - CIS - University of Guelph
 alex@eddie.cis.uoguelph.ca   http://eddie.cis.uoguelph.ca/~alex
-----------------------------------------------------------------

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network Canada (1:109/42)

+----------------------------------------------------------------------------+

From: whgiii@openpgp.net                                09-Dec-99 14:39:01
  To: All                                               09-Dec-99 22:41:11
Subj: File Sharing Errors with Warp 4 & WSeB

From: William Geiger <whgiii@openpgp.net>

Hi,

I am having a file sharing problem on WSeb shared directory. I am 
running a NT application which I have set up to store it's database 
files on the shared directory.

According to the WSeB audit logs the only place I seem to be having 
problems is when the app tries a RWC access to one of the files:

WHGIII              DELL400     Access unsuccessful  12-08-99 12:29AM
RWC D:\dn2id.dbb

The NT app is running as a service and is logging in as the WSeB 
administrator. 

R, W, RW, WC, & D access to the files all work fine but every time there
is a RWC entry in the Audit log I get Access unsuccessful. :(

FWIW I had the same problem trying to use a shared drive on a Warp 4 
client.

If anyone knows what the @#$@#$ is going on please let me know.

tks,



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: sma.spam-not@rtd.com                              10-Dec-99 01:09:04
  To: All                                               09-Dec-99 22:41:11
Subj: Re: Networking a HP LaserJet4...

From: James Moe <sma.spam-not@rtd.com>


"Dave {Reply Address in.sig}" wrote:
> 
> 
> As an aside, did anyone notice that HP have discontinued decent
> JetAdmin support for OS/2 - you have to have an NT server on your
> system to run the newer OS/2 JetAdmin. I couldn't find a suitable HP
> contact to complain to in the notifying email :-( Not that I use it
> anyway...
> 
  As I recall, HP is discontinuing ALL versions of JetAdmin, not just
os/2. The replacement is WebJetAdmin.

-- 

sma at rtd dot com
Remove ".spam-not" for email

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)

+----------------------------------------------------------------------------+

From: ajglass@cpcug.org                                 09-Dec-99 23:29:17
  To: All                                               09-Dec-99 22:41:12
Subj: Re: different TCP/IP configuration

From: ajglass@cpcug.org (Andrew J. Glass)

Can you kindly tell me how I would go about loading the network drivers for a
(second) Ethernet card?

Can you kindly tell me whether I could load the TCP/IP info under "lan 1"? If
so, how would tell the machine whether I wanted to connect to lan 0 or lan 1?
Is it possible to be connected (at least at the DNS level) to both?

Thanks.


:>The IP address and router info is stored in \mptn\bin\setup.cmd.  The 
:>DNS info is stored in \mptn\etc\resolv2.  To use different OS/2 at 
:>different sites, just replace these files.  I have my computer 
:>configured to select location at bootup.  I change the setup.cmd file,
:>lan logon commands and network drivers, but not resolve file.
:>
:>-- 
:>E-mail jknott@ca.ibm.com
:>_________________________________________________________________________
:>The above opinions are my own and not those of ISM Corp., a subsidiary of
:>IBM Canada Ltd.



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Capital PC Users Group (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           10-Dec-99 00:56:27
  To: All                                               09-Dec-99 22:41:12
Subj: Re: different TCP/IP configuration

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Thu, 9 Dec 1999 23:29:34, ajglass@cpcug.org (Andrew J. Glass) 
wrote:

> Can you kindly tell me how I would go about loading the network drivers for
a
> (second) Ethernet card?
> 
> Can you kindly tell me whether I could load the TCP/IP info under "lan 1"?
If
> so, how would tell the machine whether I wanted to connect to lan 0 or lan
1?
> Is it possible to be connected (at least at the DNS level) to both?
> 

Just use MPTS to configure the driver for the network card
and add the TCP/IP protocol for that interface.

You can have TCP/IP bound to a maximum of 8 NIC's (I think that's
the limit anyway).

The "route" statements in the SETUP.CMD file determine which
interface is used for sending out the packets.

If you have two NIC's 

ifconfig lan0 10.1.1.1
route add net 205.200 10.1.1.1 
route add net 200.100 10.1.1.1

ifconfig lan1 10.1.2.1
route add net 168 10.1.2.1
route add net 54,1 10.1.2.1

route add default 205.200.1.1


This configuration will route packets to
any IP address in the subnet 205.200 through
the lan0 interface (they will have to connected to
the LAN the NIC is part of). It will also route
packets for any address 200.100.x.x through
lan0

The second NIC will be used to pass along
packets addressed to the sub nets 168.x.x.x
and 54.1.x.x (the machines on those sub nets 
will have to attached to the LAN the NIC is part of).

Any packets addressed to IP addresses that
are outside of the named sub net routes will
be sent to the IP address 205.200.1.1 which
will be sent out through lan0 as that NIC has
a sub net route for that IP address.

Clear as mud, right?


--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             09-Dec-99 08:55:03
  To: All                                               09-Dec-99 22:41:12
Subj: Re: Apache 1.2.4 problem

From: Scott Vetter <svetter@ameritech.net>

Lorne:

   I've got the entry in the HOSTS file.  Any other ideas?

Thank you

-------------

Lorne Sunley wrote:

> On Wed, 8 Dec 1999 23:24:22, Scott Vetter <svetter@ameritech.net>
> wrote:
>
> > I'm just starting to work with web servers on my OS/2 V4 system.  When I
> > start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> > determine the IP address of the specified ServerName (127.0.0.1)".  The
> > address (127.0.0.1) is defined to my system as a local host in the
> > TCP/IP configuration.  What's wrong?
> >
>
> Do you have an entry in the \mptn\etc\hosts file
> for 127.0.0.1 that has the host name of your machine?
>
> --
>
> Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             09-Dec-99 08:58:07
  To: All                                               09-Dec-99 22:41:12
Subj: Re: Apache 1.2.4 problem

From: Scott Vetter <svetter@ameritech.net>

Fujiha:

   That name is set in the ServerName entry as well as the HOSTS entry.  Next
idea?

Thank you,

-------------------

Fujiha wrote:

> Scott Vetter wrote:
> >
> > I'm just starting to work with web servers on my OS/2 V4 system.  When I
> > start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> > determine the IP address of the specified ServerName (127.0.0.1)".  The
> > address (127.0.0.1) is defined to my system as a local host in the
> > TCP/IP configuration.  What's wrong?
>
> ServerName should be localhost

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         09-Dec-99 08:07:20
  To: All                                               09-Dec-99 22:41:12
Subj: Re: Apache 1.2.4 problem

From: Fujiha <peterpan@mail2.dgraph.com>

Scott Vetter wrote:
> 
> Fujiha:
> 
>    That name is set in the ServerName entry as well as the HOSTS entry. 
Next
> idea?
> 
> Thank you,

So what does the host command give you when you query the localhost
host? It should give the localhost IP.


> 
> -------------------
> 
> Fujiha wrote:
> 
> > Scott Vetter wrote:
> > >
> > > I'm just starting to work with web servers on my OS/2 V4 system.  When I
> > > start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> > > determine the IP address of the specified ServerName (127.0.0.1)".  The
> > > address (127.0.0.1) is defined to my system as a local host in the
> > > TCP/IP configuration.  What's wrong?
> >
> > ServerName should be localhost

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: bm_ptx@my-deja.com                                10-Dec-99 07:39:22
  To: All                                               10-Dec-99 10:35:21
Subj: Re: Internet sharing, with different OS

From: bm_ptx@my-deja.com

Hi,

> All it really is is that everyone 'cept a few are using MS, and buying
into
> MS, and so long as everything is peachy with MS, OS2 and anything else
is
> remains but a footnote (if even that).  Anyway, it's all holding up...
>
>  http://www.billparish.com/msftfraudfacts.html

But I must admit that, apart from Win9X, NT, and probably Linux, the
OS/2 community has already been treated fairly well than the others.
Look at driver supports. Look at NVidia and VIA. At least there are
official drivers for us. What about other OSes? No, not a penny spent on
them. While these users are struggling to survive, sometimes even
writing their own drivers to survive, I must admit that we're already
enjoying a privilage, considering that OS/2's market share isn't
anything much better than the others.

However may curse falls on IBM. Now IBM no longer markets this product,
support to TeamOS/2 is over (still I think they're a wonderful team,
although I haven't contributed anything to it), no more OS/2 Warp 5,
blah blah blah. We cannot blame other companies not to release a OS/2
version of their products (both hard & softwares), when the mother
company of OS/2 abandon her own son! So I think the future of OS/2, if
not made dead by IBM, must be: 1) open the source code, like Linux - I
believe there will be no direct competition between these two as they're
aiming at different markets. But it's Bill Gates who'll be scared to
death. 2) Sell the OS/2 Client out of IBM completely, instead of holding
the licence but do nothing good to it at all. Maybe RedHat? Caldera?
Just like DR Dos? Or Sun? Maybe AOL is interested.

Anyway where is my original post? Seems that we shouldn't blame other
OSes that have better market shares. If we all support OS/2 and make it
grow larger and better (and of course with the help from IBM, now
non-existent), companies will come and give their support without we
OS/2 users bombing their marketing department's mailboxs!

Regards,
Tony Pang


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: cannyk@hotmail.com                                10-Dec-99 07:56:14
  To: All                                               10-Dec-99 10:35:21
Subj: recommend

From: "Kenny" <cannyk@hotmail.com>

hi guys,
anyone know what is the easiest manage software for mail server ????
thanks for helping .

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Subscriber of Pacific Internet (1:109/42)

+----------------------------------------------------------------------------+

From: oscarptyltd@ozemail.com.au                        10-Dec-99 19:22:05
  To: All                                               10-Dec-99 10:35:21
Subj: Re: OS/2 seeing longfilenames on a fat32-disk

From: Clem Clarke <oscarptyltd@ozemail.com.au>

So why can't OS/2 do it directly, I ask myself?

Has anyone actually reported it to IBM as a bug (apart from me - about the day
after Win 95 came out <smile>)?

Cheers,

Clem Clarke


Mike Ruskai wrote:

> On Sun, 14 Nov 1999 14:10:21 -0500, Esben Rugbjerg wrote:
>
> >I am on a lan with filesharing.
> >
> >It is run on tcpip and NetBios over Tcpip.
> >
> >When I look on a disk which uses fat32 I can't see the long filenames.
> >
> >Can anybody tell me why ?
>
> OS/2 and WinXX use different SMB implementations.  They negotiate to the
> lowest level they support in common, which for the OS/2-WinXX direction is
> a level that doesn't support long filenames.  In the other direction, it's
> a level which does support long filenames.
>
> It's odd, and if I were paranoid, I'd call it intentional on the part of
> MS.
>
> >Do I need install som extra software ?
>
> The only way I'm aware of to circumvent the problem is to install Samba on
> the OS/2 machine, which is a GNU SMB client, which will be able to
> communicate with WinXX at a level that supports long filenames.
>
> It's a pain to setup, though.
>
> --
>  - Mike
>
> Remove 'spambegone.net' and reverse to send e-mail.

--


  ,-._|\  Clement V. Clarke - Author Jol, EASYJCL, EASYPANEL, OSCAR, 370TO486
 /  Oz  \ oscarptyltd@ozemail.com.au, Web:
http://www.ozemail.com.au/~oscarptyltd
 \_,--.x/ P.O. Box 475, Toorak, Victoria, AUSTRALIA, 3142.
       v  Tel (61)-3-9818-8351, Fax (61)-3-9819-2848.


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: OzEmail Ltd, Australia (1:109/42)

+----------------------------------------------------------------------------+

From: jknott@ibm.net                                    10-Dec-99 05:41:20
  To: All                                               10-Dec-99 10:35:21
Subj: Re: different TCP/IP configuration

From: jknott@ibm.net (James Knott)

In article <yXW34.96$C9.9694@news>, ajglass@cpcug.org (Andrew J. Glass) wrote:
>Can you kindly tell me how I would go about loading the network drivers for a
>(second) Ethernet card?
>
>Can you kindly tell me whether I could load the TCP/IP info under "lan 1"? If
>so, how would tell the machine whether I wanted to connect to lan 0 or lan 1?
>Is it possible to be connected (at least at the DNS level) to both?

I'm not sure what you're trying to do.  Do you want two cards enabled 
or a different card for each location?  If all you need is a second 
card, it is done in MPTS.  If you need different cards for different 
locations, you'll have to create some .CMD files that can swap files 
at bootup as required.  The files you need to swap are 
\mptn\bin\setup.cmd and \ibmlan\ibmlan.ini.  Both cards have to be in 
config.sys, unless you also want to swap or change that file.

-- 
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: t_am@gmx.de                                       10-Dec-99 12:07:20
  To: All                                               10-Dec-99 10:35:22
Subj: Re: OS/2 seeing longfilenames on a fat32-disk

From: t_am@gmx.de (Timo Maier)

Hi Clem!

>So why can't OS/2 do it directly, I ask myself?
>Has anyone actually reported it to IBM as a bug (apart from me - about the
day
>after Win 95 came out <smile>)?
Must be a "bug" in Win9x.

TAM
-- 
OS/2 Warp4, Ducati 750SS '92
http://www.privat.toplink.de/homepages/thunder
Remove "_" for eMail reply

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Freiburg/Germany (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           10-Dec-99 15:09:04
  To: All                                               10-Dec-99 14:58:23
Subj: Re: recommend

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Fri, 10 Dec 1999 07:56:28, "Kenny" <cannyk@hotmail.com> wrote:

> hi guys,
> anyone know what is the easiest manage software for mail server ????
> thanks for helping .
> 

If you are looking for a POP3 server to deliver mail to
people there is a POP3 server os2pops.zip on the
IBM PC Company FTP site

URL ftp://ftp.pc.ibm.com/pub/pccbbs/os2_ews/os2pops.zip

It is Employee Written software, and it worked OK when I
tried it out.

You use it in conjunction with sendmail (used to get mail
delivered from the internet).

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             10-Dec-99 13:30:05
  To: All                                               10-Dec-99 14:58:23
Subj: Re: Bind for OS/2

From: Scott Vetter <svetter@ameritech.net>

Buddy:

   Those are the directions I followed...   But is there not supposed to be an
entry added to the TCP/IP configuration page that says that the local
machine's DNS is to be checked prior to any other like my ISP's?

   Also, how does one add entries?  I have not seen any other way of adding
entries unless the zone file is edited.

   What can I say I'm new to this stuff...

Scott

----------------------------

Buddy Donnelly wrote:

> On Wed, 8 Dec 1999 23:25:51, Scott Vetter <svetter@ameritech.net>
> wrote:
>
> >     I've downloaded and installed Bind/8 for OS/2 and I'm using OS/2 V4,
> > however the documentation does not tell me how to get Bind to interface
> > with OS/2.  How does one do this?
>
> Didn't your distribution have a file named SETUP.OS2? I've quoted it
> all, below.
>
> --
>
> Good luck,
>
> Buddy
>
> Buddy Donnelly
> donnelly@tampabay.rr.com
>
> ------------SETUP.OS2
> Quick setup guide for a caching-only server
> -------------------------------------------
>
> prereqs:
>   OS/2 version ?.?? or higher
>   TCP/IP version ?.?? or higher
>   EMX runtime version 0.9c or higher
>   HPFS
>
> move the folowing files to a directory in your path:
>   named.exe
>   named-xfer.exe
>   emxkill.exe
>   ndc.cmd
>
> optionally, you may also want to put the following tools in
> the same directory:
>   nslookup.exe
>   dig.exe
>   dnsquery.exe
>   host.exe
>   addr.exe
>   nsupdate.exe
>   nssig.cmd
>
> move the following file to your ETC directory
>   nslookup.help
>
> make a copy of the sample conf file in your ETC directory
>   cd %ETC%
>   copy y:\xxx\bind\etc\samples\named.conf
>
> create a database directory in your ETC directory
>   md namedb
>
> switch to the database directory
>   cd namedb
>
> copy database files into it
>   copy y:\xxx\bind\etc\samples\127.0.0.zone
>   copy y:\xxx\bind\etc\samples\root.hint
>   copy y:\xxx\bind\etc\samples\localhost.zone
>   copy y:\xxx\bind\etc\samples\bogus.zone
>
> edit named.conf and update the directory option
>
> start the server
>   ndc start
>
> Thanks a lot to Ed Tomlinson <tomlins@cam.org> for this guide.
>
> bjorn@mork.no
> May 03 1998

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: svetter@ameritech.net                             10-Dec-99 13:26:27
  To: All                                               10-Dec-99 20:37:00
Subj: Re: Apache 1.2.4 problem

From: Scott Vetter <svetter@ameritech.net>

Fujiha:

    I enter the command of "host local host" and get a response of "localhost
=
127.0.0.1".

    Possible that Apache's config is not set up right?

Scott

--------------------

Fujiha wrote:

> Scott Vetter wrote:
> >
> > Fujiha:
> >
> >    That name is set in the ServerName entry as well as the HOSTS entry. 
Next
> > idea?
> >
> > Thank you,
>
> So what does the host command give you when you query the localhost
> host? It should give the localhost IP.
>
> >
> > -------------------
> >
> > Fujiha wrote:
> >
> > > Scott Vetter wrote:
> > > >
> > > > I'm just starting to work with web servers on my OS/2 V4 system.  When 
I
> > > > start up Apace V1.2.4 I receive the following message: "Httpd: Cannot
> > > > determine the IP address of the specified ServerName (127.0.0.1)". 
The
> > > > address (127.0.0.1) is defined to my system as a local host in the
> > > > TCP/IP configuration.  What's wrong?
> > >
> > > ServerName should be localhost

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Ameritech.Net www.ameritech.net  Complaints: abus
(1:109/42)

+----------------------------------------------------------------------------+

From: ajglass@cpcug.org                                 10-Dec-99 19:20:06
  To: All                                               10-Dec-99 20:37:00
Subj: Re: different TCP/IP configuration

From: ajglass@cpcug.org (Andrew J. Glass)

I think you've told me what I need to know.
One ethernet card goes to am ADSL device.
The other card would go to an 24/7 ISDN link to my office network, which gets
me through the firewall and gains me access to my office e-mail files and
other otherwise restricted goodies.
In NT4, I had both cards working for awhile but then IP contention errors set
in and the whole edifice crashed.

Thanks. 

In message <kjNU4odSR0CS089yn@ibm.net> - jknott@ibm.net (James Knott)Fri, 10
Dec 1999 05:41:40 -0500 writes:
:>
:>In article <yXW34.96$C9.9694@news>, ajglass@cpcug.org (Andrew J. Glass)
wrote:
:>>Can you kindly tell me how I would go about loading the network drivers for 
a
:>>(second) Ethernet card?
:>>
:>>Can you kindly tell me whether I could load the TCP/IP info under "lan 1"?
If
:>>so, how would tell the machine whether I wanted to connect to lan 0 or lan
1?
:>>Is it possible to be connected (at least at the DNS level) to both?
:>
:>I'm not sure what you're trying to do.  Do you want two cards enabled 
:>or a different card for each location?  If all you need is a second 
:>card, it is done in MPTS.  If you need different cards for different 
:>locations, you'll have to create some .CMD files that can swap files 
:>at bootup as required.  The files you need to swap are 
:>\mptn\bin\setup.cmd and \ibmlan\ibmlan.ini.  Both cards have to be in 
:>config.sys, unless you also want to swap or change that file.
:>
:>-- 
:>E-mail jknott@ca.ibm.com
:>_________________________________________________________________________
:>The above opinions are my own and not those of ISM Corp., a subsidiary of
:>IBM Canada Ltd.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Capital PC Users Group (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         10-Dec-99 13:05:03
  To: All                                               10-Dec-99 20:37:00
Subj: Re: Apache 1.2.4 problem

From: Fujiha <peterpan@mail2.dgraph.com>

Scott Vetter wrote:
> 
> Fujiha:
> 
>     I enter the command of "host local host" and get a response of
"localhost =
> 127.0.0.1".
> 
>     Possible that Apache's config is not set up right?
> 
> Scott

I assume you meant "host localhost" as the command

Also, what if Apache queries the DNS to resolve the name?
If there is no DNS accessible then it might not work.

In my case I have this entry in my httpd.conf file

ServerName sobieski.powersurfr.com

See what happens when you are connected to the net and enter your
hostname as assigned by your ISP.
Most likely will work.

> 
> --------------------
> 
> Fujiha wrote:
> 
> > Scott Vetter wrote:
> > >
> > > Fujiha:
> > >
> > >    That name is set in the ServerName entry as well as the HOSTS entry.  
Next
> > > idea?
> > >
> > > Thank you,
> >
> > So what does the host command give you when you query the localhost
> > host? It should give the localhost IP.
> >

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: peterpan@mail2.dgraph.com                         10-Dec-99 13:27:19
  To: All                                               10-Dec-99 20:37:00
Subj: Re: Bind for OS/2

From: Fujiha <peterpan@mail2.dgraph.com>

Scott Vetter wrote:
> 
> Buddy:
> 
>    Those are the directions I followed...   But is there not supposed to be
an
> entry added to the TCP/IP configuration page that says that the local
> machine's DNS is to be checked prior to any other like my ISP's?

Edit your RESOLV2 file (x:\mptn\etc)

You can have a max of 3 DNS servers

Here is mine

domain powersurfr.com
nameserver 206.75.216.200 <----- will be queried first
nameserver 206.75.216.210 <----- will be queried second

if you type in

domain your.domain
nameserver 127.0.0.1 <----- will be queried first
nameserver your.isp.DNS.IP <----- will be queried second



> 
>    Also, how does one add entries?  I have not seen any other way of adding
> entries unless the zone file is edited.

Just add another zone entry in the named.conf file (x:\mptn\etc)

like so

zone "domain.com" IN {
	type master;
	file "domain.zone"; <-------- this filename can be anything you want
};

Then in the x:\mptn\etc\namedb directory create the zone file (in our
case domain.zone)

like so


@	IN	SOA	domain.com.	postmaster.domain.com. (
/* doesn't have to be postmaster. use the email of the admin */
199911030 /* version of xone file*/
8H
2H
1W
1D )
NS dns1.domain.com. /* DNS1 for this domain */
NS dns2.domain.com. /* DNS2 for this domain */
MX 10 mail.domain.com.  /* mail server for this doamin*/
MX 20 mail.anotherdomain.com.  /* backup mail server */

/* any hosts for this domain */
dns1 A 207.167.13.1
dns2 A 207.167.13.2
mail A 207.167.13.3
ftp A 207.167.13.3
www A 207.167.13.3
fujiha A 24.108.21.211
whatever A an.ip.address
@ TXT "Domain description"


/* stuff between these are just comments so they can be removed */

Hope this helps


> 
>    What can I say I'm new to this stuff...
>

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Dreamland (1:109/42)

+----------------------------------------------------------------------------+

From: noone@llondel.demon.co.uk                         10-Dec-99 21:56:03
  To: All                                               10-Dec-99 20:37:01
Subj: Re: Networking a HP LaserJet4...

From: "Dave {Reply Address in.sig}" <noone@llondel.demon.co.uk>

On Fri, 10 Dec 1999 01:09:08 GMT, James Moe wrote:

>
>
>"Dave {Reply Address in.sig}" wrote:
>> 
>> 
>> As an aside, did anyone notice that HP have discontinued decent
>> JetAdmin support for OS/2 - you have to have an NT server on your
>> system to run the newer OS/2 JetAdmin. I couldn't find a suitable HP
>> contact to complain to in the notifying email :-( Not that I use it
>> anyway...
>> 
>  As I recall, HP is discontinuing ALL versions of JetAdmin, not just
>os/2. The replacement is WebJetAdmin.
>
Which is not supported in an OS/2-only version as far as I can tell,
you need the NT server stuff.

Dave
-- 
mail da ve@llondel.demon.co.uk
http://www.llondel.demon.co.uk
Give blood... Play Rugby!


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: the bus stop (1:109/42)

+----------------------------------------------------------------------------+

From: 72764.2166@csi.com                                10-Dec-99 00:02:27
  To: All                                               10-Dec-99 21:22:22
Subj: Connecting to a Linux server

From: "Barry" <72764.2166@csi.com>

I have 2 computers networked.  Computer #1 runs Red Hat Linux 6.0,  Computer
#2 is a dual boot OS/2-WIN98 computer.  If I boot Computer #2 to WIN98 and
set it up to use either DHCP or manually entering of the IP address, I do
connect to the Linux box and see the shares.  
If I boot computer #2 to OS/2 and setup TCPIP to manually enter the IP
address, I do connect to the Linux box and see the shares.
However, If I change the TCPIP settings to automatically get IP address using
the Linux computer's DHCP server (and that is the only change I am making),
reboot, I do NOT see the Linux box.  I know the DHCP is working okay on the
OS/2 side since the DHCP monitor shows a valid lease with the correct IP
address (the same IP address that shows when I boot WIN98 using DHCP).  Of
course if I change back to manually entering the IP address, the shares then
show up.  Any ideas?

Barry
    


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MindSpring Enterprises (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           10-Dec-99 05:47:00
  To: All                                               10-Dec-99 21:22:22
Subj: Re: Connecting to a Linux server

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Fri, 10 Dec 1999 05:02:54, "Barry" <72764.2166@csi.com> wrote:

> I have 2 computers networked.  Computer #1 runs Red Hat Linux 6.0,  Computer
> #2 is a dual boot OS/2-WIN98 computer.  If I boot Computer #2 to WIN98 and
> set it up to use either DHCP or manually entering of the IP address, I do
> connect to the Linux box and see the shares.  
> If I boot computer #2 to OS/2 and setup TCPIP to manually enter the IP
> address, I do connect to the Linux box and see the shares.
> However, If I change the TCPIP settings to automatically get IP address
using
> the Linux computer's DHCP server (and that is the only change I am making),
> reboot, I do NOT see the Linux box.  I know the DHCP is working okay on the
> OS/2 side since the DHCP monitor shows a valid lease with the correct IP
> address (the same IP address that shows when I boot WIN98 using DHCP).  Of
> course if I change back to manually entering the IP address, the shares then
> show up.  Any ideas?
> 

What version of MPTS do you have installed?

There are bugs in the earlier releases of MPTS and it's
DHCP handling. If you haven't tried it yet update the
MPTS level to WR8610.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: laniear@pacificnet.net                            09-Dec-99 22:46:17
  To: All                                               10-Dec-99 21:22:22
Subj: NT client for Warp Server

From: laniear@pacificnet.net

Last year I setup an NT system and I wanted to be able to logon to my
server.  I donwloaded the NT client from some page at IBM.  I'm using
the NT machine again and I can't find the client anywhere.  Anyone know
where I can find it again?

BTW, if there a Linux client also?

Thanks in advance,

Lee

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)

+----------------------------------------------------------------------------+

From: donnelly@tampabay.rr.com                          10-Dec-99 23:18:07
  To: All                                               10-Dec-99 21:22:23
Subj: Re: Bind for OS/2

From: donnelly@tampabay.rr.com (Buddy Donnelly)

On Fri, 10 Dec 1999 18:30:10, Scott Vetter <svetter@ameritech.net> 
wrote:

> Buddy:
> 
>    Those are the directions I followed...   But is there not supposed to be
an
> entry added to the TCP/IP configuration page that says that the local
> machine's DNS is to be checked prior to any other like my ISP's?

I believe this is configured in NAMED.CONF, which you do have to edit 
locally.

Also, there's an entry near the bottom of the docs that says:

	> > start the server
	> >   ndc start

Which I accomplish by putting this line in my STARTUP.CMD file:

	call=e:\web\bind\bin\ndc.cmd start

NDC.CMD was already in the BIND8 distribution. As I understand it, 
this is all that's needed, to kick off E:\WEB\BIND\BIN\NAMED.EXE, 
which eats lots of CPU (according to TOP) when things are quiet but 
doesn't get in the way when things get jumping, and even to 


> 
>    Also, how does one add entries?  I have not seen any other way of adding
> entries unless the zone file is edited.

I believe all I'm doing with the basic setup is providing local 
caching for DNS lookups. There are directions for turning it into a 
full-bore DNS server, but I haven't fooled with it. Our local ISP's 
(RoadRunner) name server is woefully slow, and installing BIND speeded
things up noticeably.

> 
>    What can I say I'm new to this stuff...

You can't be any greener at it than I was when I installed it earlier 
in the year. I stumbled through and got it to load every time, so I 
assume it's working.

However. If you have a slowish DNS server, there's a more direct way 
(I believe) to supply IP numbers, if you have URLs that are accessed 
on a regular basis. As most individuals do.

Add this line to CONFIG.SYS:

SET USE_HOSTS_FIRST=1

Then start adding entries to your HOSTS file, probably 
x:\MPTN\ETC\HOSTS, as in the first few lines quoted below from my own:

127.0.0.1     smart.cache     scache      # customization 9/18/99
4.22.129.30     superpages.gte.net           #
24.92.3.50     rrweb2           #
24.94.23.192     www.dynhost.com           #


HOSTS entries allow local aliases, such as the "scache" entry for 
SmartCache, so that I can just type "scache" into the proxy blank. Or 
you can even use aliasing to associate a target IP with a web URL, to 
provide some control over browsers in a network.

I'm no expert in this, and like very much like to use a utility called
RACERNET to import the URLs contained in various HTML (BOOKMARK.HTM, 
WebOrg pages, etc.), extract an IP number, then verify the link as 
being active, and *then* when you close it, it adds all the new 
entries to HOSTS for me. Find it at:

	http://www.frugalsoft.com/racernet/index.html


-- 

Good luck,

Buddy

Buddy Donnelly
donnelly@tampabay.rr.com




--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RoadRunner - TampaBay (1:109/42)

+----------------------------------------------------------------------------+

From: bobmcl@ibm.net                                    10-Dec-99 08:44:00
  To: All                                               10-Dec-99 23:09:10
Subj: Re: File & Print Client won't install

From: Bob McLellan <bobmcl@ibm.net>


slindsey@facstaff.wisc.edu wrote:

> I can't get the File & Print Client in Warp 4 to install.  I've tried
> installing it repeatedly but the Network icon does not show up under
> Connections and when I go back in to Selective Install for Networks the
> client is listed as NOT installed.  I've read mention of this problem
> on other web pages but no details on a solution were given (something
> to do with the config.sys file).  Any suggestions?  Please email as
> well as post.
>
> Thanks
> -Scott
> slindsey@facstaff.wisc.edu
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

 There is a problem with the icons when you install again. I think it is
tied up with the fact that at the end of a full OS/2 install a program
called CLNDESK is run. This shuffles all the desktop icons. I suspect that
when we try to reinstall F&P it can't handle the new layout.
Try this
Paste the lines below to a file 'fandp.rsp'
*******************************************************************
DELETEIBMLAN = Networks<

  netlb =

  net2 =
  net3 =
  net4 =
>

UPDATEIBMLAN = Networks<

net1 = NETBEUI$,*,LM10,*,100,*

>

UPDATEIBMLAN = Peer<

  srvcomment = BOB'S WORKSTATION

>

DELETEIBMLAN = Requester<

  wrknets = net2, net3, net4
  wrkservices = MESSENGER

>

ADDIBMLAN = Requester<

  wrknets = net1
  wrkservices = MESSENGER

>

UPDATEIBMLAN = Requester<

  Computername = myname
  Domain = mydomain

>

  ConfigTargetDrive = E
  ConfigAutoStartLS = Migrate
  ConfigSourceDrive = E
  ReplaceNetAcc = NO
  InstallFFST = NO
  InstallAPI = INSTALLIFREQUIRED
  InstallDosLanApi = INSTALLIFREQUIRED
  InstallInstallProgram = INSTALLIFREQUIRED
  InstallPeerService = INSTALL
  InstallRequester = INSTALLIFREQUIRED
  InstallUPM = INSTALLIFREQUIRED
  InstallMSGPopup = INSTALLIFREQUIRED
  InstallGUI = INSTALL
  InstallClipBoard = INSTALLIFREQUIRED
  InstallBooks = INSTALLIFREQUIRED
  InstallAdminGUI = REMOVE
*************************************************************************
Modify the two drive lines, domain and computer name to suit your
installation.

Paste this command line into a command file and modify it to suit your
installation. Run it.
**************************************************************************
x:\cid\ibmpeer\peerrmt /l1:c:\mydir\peerbase.log /PEER
/r:c:\mydir\fandp.rsp

where x: is your CD. Just have a look in the CD and check the cid\ibmpeer
path. It should be the path that has the peer image in it.

Regards
--------------------------------------------------------
Bob McLellan
The Little Blue Kiwi
OS/2 Solutions for New Zeland


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

+============================================================================+
