
                   comp.os.os2.networking.misc      (Usenet)

                 Saturday, 27-Nov-1999 to Friday, 03-Dec-1999

+----------------------------------------------------------------------------+

From: jcleveland@carolina.rr.com                        27-Nov-99 01:44:26
  To: All                                               27-Nov-99 03:29:02
Subj: Re: NIC for os/2?

From: Jon Cleveland <jcleveland@carolina.rr.com>

Just wanted to say, I did get my cable modem working. The card,
3com509b-tp, is fine.
Apparently I had a bad file somewhere even after the upgrades to MPTS and
TCP/IP.
I did a complete re-install and its working fine.
Thanks

Jon C.

Jon Cleveland wrote:

> Can someone recommend a good NIC for OS/2 with proper drivers?
> I have an older 3com card that doesn't appear to work well under OS/2.
>
> Thanks
>
> Jon C.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: RoadRunner - Carolina (1:109/42)

+----------------------------------------------------------------------------+

From: sdunnin@iw.edwpub.com                             26-Nov-99 23:36:17
  To: All                                               27-Nov-99 03:29:03
Subj: PPP and server assigned DNS server

From: Steve Dunning <sdunnin@iw.edwpub.com>

My ISP recently started using  dynamic server assigned DNS server
addresses. I believe their PPP server performs that task along with the
dynamic IP address assignment, which os/2's PPP handles just fine.

Does anyone know how to make the dynamic dns server address assignment
work with DOIP and PPP?

Thanks,
Steve



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: UseNet Server, Inc.  http://www.usenetserver.com 
(1:109/42)

+----------------------------------------------------------------------------+

From: evsi@naverex.kiev.ua                              27-Nov-99 06:29:00
  To: All                                               27-Nov-99 03:29:03
Subj: Re: PPP and server assigned DNS server

From: evsi@naverex.kiev.ua (Sergey I. Yevtushenko)

On Sat, 27 Nov 1999 04:36:34, Steve Dunning <sdunnin@iw.edwpub.com> wrote:

> My ISP recently started using  dynamic server assigned DNS server
> addresses. I believe their PPP server performs that task along with the
> dynamic IP address assignment, which os/2's PPP handles just fine.
> 
> Does anyone know how to make the dynamic dns server address assignment
> work with DOIP and PPP?

These IPCP options (like dynamically assigned IP addresses) just rejected by
PPP. 
PPP is outdated and there is no way to make it work. Take a look at SafeFire
PPP 
(http://www.lgs.kiev.ua/) and you'll find a solution for that problem.

Regards,
	Sergey.

*--------------------------------------
ES@Home

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: ES@Home (1:109/42)

+----------------------------------------------------------------------------+

From: maxikins@os2bbs.com                               27-Nov-99 11:26:17
  To: All                                               27-Nov-99 10:30:01
Subj: Re: PPP and server assigned DNS server

From: maxikins@os2bbs.com (Mark Klebanoff)

The latest version of InJoy supports server-assigned DNS addresses.  
Another trick is to login using Windoze9x and run 'winipcfg'  It will 
give you the addresses of the DNS and you can enter them manually into
DOIP

On Sat, 27 Nov 1999 04:36:34, Steve Dunning <sdunnin@iw.edwpub.com> 
wrote:

> My ISP recently started using  dynamic server assigned DNS server
> addresses. I believe their PPP server performs that task along with the
> dynamic IP address assignment, which os/2's PPP handles just fine.
> 
> Does anyone know how to make the dynamic dns server address assignment
> work with DOIP and PPP?
> 
> Thanks,
> Steve
> 
> 
> 


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Verio (1:109/42)

+----------------------------------------------------------------------------+

From: kenames@earthlink.net                             27-Nov-99 17:31:28
  To: All                                               27-Nov-99 16:56:12
Subj: NS4.04 & Java

From: kenames@earthlink.net

I have java 1.18 and nescape 4.04 installed on warp 4 with fixpak11. 
My problem is when loading any page with java, the status line at 
bottom of ns says "starting Java" for about 3 seconds and then 
netscape just closes. Has this happened to anyone else and is there a 
solution? Thanks.

Ken


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: EarthLink Network, Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: t_am@gmx.de                                       27-Nov-99 18:23:07
  To: All                                               27-Nov-99 16:56:12
Subj: net files -> files don't get closed at once

From: t_am@gmx.de (Timo Maier)

Hi!

When I open files from a NT4 (SP5) client on my Warp 4 server, and close them
on client side, the files still are opened up to about 40 seconds on the Warp
server. I can see this using "net files".

Doing the same on a Warp 4 client (DOS mode), the file are closed right after
the client closes the files.

It doesn't matter if I use the IBM primary logon client, or the NT client. I
tested NetBios and NetBios over tcp/ip, same result.

Is that a known problem or what could be wrong?

TAM
-- 
OS/2 Warp4, Ducati 750SS '92
http://www.privat.toplink.de/homepages/thunder
Remove "_" for eMail reply

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Freiburg/Germany (1:109/42)

+----------------------------------------------------------------------------+

From: abrahams@sparc.isl.net                            27-Nov-99 15:53:06
  To: All                                               28-Nov-99 00:25:05
Subj: Re: local LAN connection problems with 2 WARP4 systems

From: "Lionel C. Abrahams" <abrahams@sparc.isl.net>

On Fri, 26 Nov 1999 15:01:40 GMT, Matt Hickman wrote:

>You might want to post the protocol.ini and the \mptn\bin\setup.cmd
>from both Warp systems.

Here they are:
From system A  
I:\mptn\BIN\SETUP.CMD 
 Top of File 
route -fh
arp -f
ifconfig lo 127.0.0.1
ifconfig lan0 192.168.1.1 netmask 255.255.255.0 mtu 1500
REM ifconfig lan1
REM ifconfig lan2
REM ifconfig lan3
REM ifconfig lan4
REM ifconfig lan5
REM ifconfig lan6
REM ifconfig lan7
route add default 192.168.1.1 -hopcount 1
route add -net 192.168.1 192.168.1.1 -netmask 255.255.255.0
-hopcount 1
ipgate off
 End of File 


I:\IBMCOM\PROTOCOL.INI
 Top of File 
[PROT_MAN]

   DRIVERNAME = PROTMAN$

[IBMLXCFG]

   netbeui_nif = netbeui.nif
   tcpbeui_nif = tcpbeui.nif
   tcpip_nif = tcpip.nif
   LNE100_nif = LNE100.NIF

[NETBIOS]

   DriverName = netbios$
   ADAPTER0 = netbeui$,0
   ADAPTER1 = tcpbeui$,1

[netbeui_nif]

   DriverName = netbeui$
   Bindings = LNE100_nif

==========================================================

From system B

G:\MPTN\BIN\SETUP.CMD
 Top of File 
route -fh
ifconfig lan0 192.168.1.2 netmask 255.255.255.0 mtu 1500
REM ifconfig lan1
REM ifconfig lan2
REM ifconfig lan3
REM ifconfig lan4
REM ifconfig lan5
REM ifconfig lan6
REM ifconfig lan7
ifconfig lo 127.0.0.1
rem ifconfig sl0
route add default 192.168.1.2 -hopcount 1
route add -net 192.168.1 192.168.1.2 -netmask 255.255.255.0
-hopcount 1
ipgate off
 End of File 



G:\IBMCOM\PROTOCOL.INI
 Top of File 
[PROT_MAN]

   DRIVERNAME = PROTMAN$

[IBMLXCFG]

   NETBEUI_nif = NETBEUI.NIF
   TCPBEUI_nif = TCPBEUI.NIF
   TCPIP_nif = TCPIP.NIF
   IBMFEEO2_nif = IBMFEEO2.nif

[NETBIOS]

   DriverName = netbios$
   ADAPTER0 = netbeui$,0
   ADAPTER1 = tcpbeui$,1

[NETBEUI_nif]

   DriverName = netbeui$
   Bindings = IBMFEEO2_nif

===========================================
TIA for looking them over
...Posted with PMINews 2.00.1200
   using OS/2 WARP4 @FP12




  -----------== Posted via Newsfeeds.Com, Uncensored Usenet News ==----------
   http://www.newsfeeds.com       The Largest Usenet Servers in the World!
------== Over 73,000 Newsgroups - Including  Dedicated  Binaries Servers
==-----

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Newsfeeds.com http://www.newsfeeds.com 73,000+ UN
(1:109/42)

+----------------------------------------------------------------------------+

From: matthickman@my-deja.com                           28-Nov-99 02:00:04
  To: All                                               28-Nov-99 00:25:06
Subj: Re: networking os2 to Linux

From: Matt Hickman <matthickman@my-deja.com>

In article <unvznaaqzertvasvarg.flt6nb0.pminews@news.dmreg.infi.net>,
  "Terry Haimann" <thaimann@dmreg.infi.net> wrote:
> The problem is more basic then this, I can't get the 2 machines  to
connect
> and I beleive it is on the os2 side that I have the problem.
> Therefore I am looking for basic imfo as how to set up networking on
os2 to
> connect to linux, so far all I have managed to do is fry my internet
> connection.
>

Install an ethernet Card on the Warp Machine. Install another ethernet
on the Linux machine. Make sure they both use the same type of cable.
Connect the machines using 10 baseT,thin ethernet, whatever.  Run
continuity test on the wire. Install a hub, if necessary. Design
IP with appropriate adresses, subnets et al.

Run Peerinst (or install Samba).  Make sure you have the correct
driver for the card and there are no hardware conflicts.  Configure
TCP/IP. Ping yourself on the Warp machine.  Ping your Linux machine.
Use netstat on the Warp machine for troublershooting.


--
Matt Hickman
I don't even see how a four-dimensional coffee cup
could even hold coffee, much less a whole galaxy.
              - Robert A. Heinlein (1907-1988)


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: thaimann@dmreg.infi.net                           27-Nov-99 21:51:21
  To: All                                               28-Nov-99 04:44:28
Subj: Re: networking os2 to Linux

From: "Terry Haimann" <thaimann@dmreg.infi.net>

I went back to John Summerfield's Web page "setting up a home lan" and
basically created a table to catorgize each setting.  With this informattion
I made another attempt to set up the network.  Well I think I was
succsessful, I can ping each machine from the other.  What I can't do is
telnet from my os2 box to my linux box.  I beleive the problem is that Linux
is using some sort of secure telnet deamon and os2 has just a standard telnet
client.  I tryed d/l ssh for os2, but still can't connect to the linux
machine.  If I can figure out how to setup Linux to use the standard telnet
deamon and then set the allow file to local connections only, that is what I
will probably do.

I still need information as how to set up infi.net on Linux, this would allow
both my Wife and I to internet at the same time.

Thx	Terry

On Sun, 28 Nov 1999 02:00:08 GMT, Matt Hickman wrote:

>In article <unvznaaqzertvasvarg.flt6nb0.pminews@news.dmreg.infi.net>,
>  "Terry Haimann" <thaimann@dmreg.infi.net> wrote:
>> The problem is more basic then this, I can't get the 2 machines  to
>connect
>> and I beleive it is on the os2 side that I have the problem.
>> Therefore I am looking for basic imfo as how to set up networking on
>os2 to
>> connect to linux, so far all I have managed to do is fry my internet
>> connection.
>>
>
>Install an ethernet Card on the Warp Machine. Install another ethernet
>on the Linux machine. Make sure they both use the same type of cable.
>Connect the machines using 10 baseT,thin ethernet, whatever.  Run
>continuity test on the wire. Install a hub, if necessary. Design
>IP with appropriate adresses, subnets et al.
>
>Run Peerinst (or install Samba).  Make sure you have the correct
>driver for the card and there are no hardware conflicts.  Configure
>TCP/IP. Ping yourself on the Warp machine.  Ping your Linux machine.
>Use netstat on the Warp machine for troublershooting.
>
>
>--
>Matt Hickman
>I don't even see how a four-dimensional coffee cup
>could even hold coffee, much less a whole galaxy.
>              - Robert A. Heinlein (1907-1988)
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: InfiNet (1:109/42)

+----------------------------------------------------------------------------+

From: pjohann@ibm.net                                   28-Nov-99 16:51:07
  To: All                                               28-Nov-99 14:37:29
Subj: Peer Trouble

From: pjohann@ibm.net (Per Johannessen)

After some changes of NIC's I now have trouble
making my 3 pc's find each other. Each workstation
boots just fine, binding protocols and adapters.
(Running Ethernet and coax cabling.)
However, when I start the program for connections
and sharing, Peer services only finds the local PC
I'm searching from. When typing in the name on other
existing resources I get error message; unable to find
network path, and sometimes SYS0053.
I'm quite lost, so any help is welcome.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Tele2 Norway AS Public Access (1:109/42)

+----------------------------------------------------------------------------+

From: pjohann@c2i.net                                   28-Nov-99 17:03:23
  To: All                                               28-Nov-99 14:37:29
Subj: Re: Peer Trouble

From: pjohann@c2i.net (Per Johannessen)

On Sun, 28 Nov 1999 16:51:14, pjohann@ibm.net (Per Johannessen) wrote:

Please note my new e-mail address: pjohann@c2i.net

> After some changes of NIC's I now have trouble
> making my 3 pc's find each other. Each workstation
> boots just fine, binding protocols and adapters.
> (Running Ethernet and coax cabling.)
> However, when I start the program for connections
> and sharing, Peer services only finds the local PC
> I'm searching from. When typing in the name on other
> existing resources I get error message; unable to find
> network path, and sometimes SYS0053.
> I'm quite lost, so any help is welcome.


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Tele2 Norway AS Public Access (1:109/42)

+----------------------------------------------------------------------------+

From: jladams24@aol.com                                 28-Nov-99 17:28:00
  To: All                                               28-Nov-99 16:57:23
Subj: FS:  3COM SUPERSTACK II HUB 10 TX AT $11.50

From: jladams24@aol.com (JL Adams24)

PLEASE GO TO OUR WEBPAGE TO SEE THIS AND OTHER GREAT ITEMS WE HAVE UP

http://members.ebay.com/aboutme/jla_enterprises/

BE SURE TO BOOKMARK THE PAGE BECAUSE WE ADD MANY DIFFERENT TYPES OF ITEMS FROM
WEEK TO WEEK.  YOU NEVER KNOW WHAT TYPE OF DEAL OR STEAL THAT YOU MAY FIND.

THANK YOU FOR YOUR TIME!!!!

JLA ENTERPRISES
(919) 844-0960

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: AOL http://www.aol.com (1:109/42)

+----------------------------------------------------------------------------+

From: tvoltagg@home.com                                 29-Nov-99 00:42:15
  To: All                                               28-Nov-99 21:13:18
Subj: Re: Configuring a Warp machine as a client for a Win95 NAT server

From: tvoltagg@home.com

Thanks for these responses.  I've have everything running except AOL Instant
Messenger.  Can either of you get that running?


<Duz%3.15480$n3.230304@news1.telusplanet.net>, "David Thacker" <David @
Thackernet.com> writes:
>This probably won't help you, but I thought you might find it useful anyway.
>I use Win2000 Pro RC1 as my "server" machine, which connects to the internet
>via modem.  Win2000 and Win98SE have a built in NAT/DHCP function called
>Internet Connection Sharing.  With this enabled in W2K, my Warp 4 machine on
>the home lan can use this internet connection by configuring Warp to use
>DHCP.  The W2K ICS acts as a DHCP server for the Warp machine.  Works like a
>charm.  The W2K machine will even dial on demand if the Warp machine tries
>to connect to something when the W2K machine is not connected to the
>internet.
>
>I did have one problem where the Warp machine would lose DNS service after a
>while.  I couldn't reach anything via hostname, but could still reach
>everything by IP.  So, I just manually added my ISP's DNS server addresses
>to the Warp resolv2 file -- problem solved.  That was back when it was on an
>older stack -- up to TCPIP 4.2 now.
>
>So, I don't know if WinNAT acts as a DHCP server or not, but you might want
>to try setting your Warp machine to DHCP just for the heck of it.  Or, you
>may wish to buy the Win98SE Upgrade for your windows machine.
>
>dAvid tHacker
>
>
><tvoltagg@home.com> wrote in message
>news:lJf%3.8804$n5.600781@news1.rdc2.pa.home.com...
>> I am trying a number of options in trying to improve my 2 computer peer to
>> peer system.  The "server" runs Win95b and the "client" is a Warp machine.
>> The server has 2 NICS; one connected to a cable modem and the other
>connected
>> to the client machine.
>> I've used a proxy server for a few months, but am having nagging problems.
>> I'd like to use NAT instead.  I downloaded WinNAT 1.1 and configured it,
>but
>> can't see how to configure my Warp client TCP/IP settings.  Does anyone
>know
>> of a FAQ for this?  Thanks
>
>

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Team OS/2 (1:109/42)

+----------------------------------------------------------------------------+

From: jcleve@attglobal.net                              29-Nov-99 15:00:14
  To: All                                               29-Nov-99 16:52:21
Subj: Losing network path?

From: Jon Cleveland <jcleve@attglobal.net>

Hi. I don't know much about networking at all, but here is my problem.
I have a cable modem and it works great after boot up, but after I've
been on for about an hour or so, my browser and my e-mail program seem
to lose the path. No matter what url I try to connect to Netscape gives
an error message saying can't find the page. So I try my e-mail program,

it reports the server is unreachable. The DHCP monitor says I still have
a valid
lease. If I reboot all is well again. Any suggestions?

Jon Cleveland

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: ThisSpaceLeftBlank@pacbell.net                    29-Nov-99 19:05:11
  To: All                                               29-Nov-99 16:52:21
Subj: Re: NAT/Firewall: InJoy or TCP/IP 4.2?

From: ThisSpaceLeftBlank@pacbell.net

On Sat, 13 Nov 1999 20:59:42, Alan Beagley <abeagley@datatone.com> 
wrote:

> Well, I am about to get a cable modem connection to the Internet, with only
> *one* dynamically assigned IP address, so the firewall features incorporated
> into TCP/IP 4.1 and higher are not going to do what I need. So it looks as
> though I do need to use third-party software.
> 
> Sergey or anybody else: What are the pros and cons of the InJoy Firewall
> compared to the SafeFire Firewall. The cost is the same for my needs (for
> 5-user Pro version of Injoy Firewall or unlimited-user Gold version of
> SafeFire Firewall). From my reading of the docs., the two products seem to
do
> the same thing -- or claim to.
> 
> Alan
> 
> 
> "Sergey I. Yevtushenko" wrote:
> 
> > On Sat, 13 Nov 1999 07:24:46, Alan Beagley <abeagley@datatone.com> wrote:
> >
> > > Now that TCP/IP 4.2 (or is it 4.21? -- the version included with Warp
> > > Server for e-Business) has firewall capabilities, is there any reason to
> > > use Injoy Firewall or other third-party software?
> >
> > No, as long as you don't need a NAT functionality.
> > You may look also at SafeFire Firewall http://www.lgs.kiev.ua/
> 

Hello all. I am a registered user of Injoy Firewall 1.2. I have 
effectively used the product to put 5 computers on the net by way of 
NAT and the computers
used private address space. 192.168.100.0 example. I followed the 
instructions and it put my computers on the net not a problem.
But I was not able to get Injoy Firewall 1.2 to portmap the outside 
world to my www server on port 80. I have not been able to get it to 
portmap anything at all. Nothing. May I ask did anyone have any such 
luck. If so please tell how you did it. I have contacted the author of
the program and seems he has little patience to those of lesser 
knowledge and was kinda rude. I guess we all have a bad day.  Heck I 
am not a firewall engineer or a programmer. But would like my server 
to be on the net too. Safely of course. 
I think injoy firewall is a very good product. I have not had any 
problems with it. Just the portmapping. It has not crashed on me or 
been inconsistent or anything. But really wish I could get the 
portmapping on it working. When my firewall is running it does not 
give an firewall.err or anything. The filters load and work. And when 
I dump the filters in use. It shows them which are enabled. I haven't 
a clue why it will not portmap anything in.

To test this my current configuration.  I used another product to 
portmap stuff in. 
 I used Internet Igate. igos2146.zip. It mapped my ports in the first 
time out. I was able to map the outside world to a private address 
space 192.168.100.1 example and it worked. 

I do not wish to use the Internet Igate product. I do not have 
anything agaist it or anything. I just like the Injoy firewall the 
best and paid for it and would like to use to the fullest if possible.



 


I noticed that there is a mailing list for Injoy and Injoy Connect but
not the Injoy firewall. If there was such an area I would have posted 
my response there.
Can anyone point me in the right direction. Thanks 



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: SBC Internet Services (1:109/42)

+----------------------------------------------------------------------------+

From: dmckenn@attglobal.net                             29-Nov-99 21:14:27
  To: All                                               30-Nov-99 03:28:13
Subj: Re: Realtek 8019 PnP Driver for OS/2

From: "David McKenna" <dmckenn@attglobal.net>

On Mon, 29 Nov 1999 16:03:31 GMT, Alex Thurgood wrote:

>Hi All,
>I'm a newbie to OS/2 networking and am having difficulties getting my 
>OS/2 WSEB to recognize my Realtek 8019 PnP card without bombing. I 
>installed the drivers from the diskette like it said in the 
>accompanying instructions, i.e. Using MPTS and LAPS, and it says the 
>card is correctly configured with the required protocols (TCP/IP and 
>Netbios) on adapter 0. Save, exit, reboot, load PnP ISA network card, 
>then the system hangs. There must be a conflict with some other 
>hardware (I think it's the disk drive), but I can't seem to turn off 
>the PnP Bios autoconfiguration, even when I go into the BIOS setup and 
>disactivate it. Anyone got any ideas ?
>

   Here are a couple of ideas...

   First, make sure, in your BIOS settings, that any setting like 'PNP
Operating System' or anything like that is turned OFF. Then boot OS/2, and
when the OS/2 blurb (in the upper left corner) appears, hit <Alt-F1>. A menu
comes up, hit <F5> - enable hardware detect. See if OS/2 boots then.

   If not, you probably have a hardware conflict, or driver problem. Reboot
OS/2, when the blurb appears hit <Alt-F2>. This will list each driver as it
is loaded. When it hangs, look at the last driver loaded. This may give you a
clue...

Dave McKenna


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: james.arnold@!!!usa.net                           30-Nov-99 04:23:28
  To: All                                               30-Nov-99 03:28:13
Subj: Re: NAT/Firewall: InJoy or TCP/IP 4.2?

From: james.arnold@!!!usa.net

In <UHWNLebtzuSx-pn2-0ZDFE8OhltHL@localhost>, ThisSpaceLeftBlank@pacbell.net
writes:
>On Sat, 13 Nov 1999 20:59:42, Alan Beagley <abeagley@datatone.com> 
>wrote:
>
..[snip]...
>
>I noticed that there is a mailing list for Injoy and Injoy Connect but
>not the Injoy firewall. If there was such an area I would have posted 
>my response there.
>Can anyone point me in the right direction. Thanks 
>
>
>

        Subscribe to the InJoy list. The firewall rules are the same for
the two products. There is a lot oif help available from the list.

        Jim


===========================================================================
remove !!! for e-mail
James Arnold                                email:    james.arnold@usa.net
                                              ICQ:    9719182

        Member Toronto OS/2 User Group

Brought to you by the letters O S the number 2 and NR/2
===========================================================================

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sympatico (1:109/42)

+----------------------------------------------------------------------------+

From: alexthurgood@compuserve.com                       30-Nov-99 11:01:23
  To: All                                               30-Nov-99 10:24:19
Subj: Re: Realtek 8019 PnP Driver for OS/2

From: Alex Thurgood <alexthurgood@compuserve.com>

Hi David,

Right I'll try that out, thanks.

Alex

>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<

On 30/11/99, 03:14:55, "David McKenna" <dmckenn@attglobal.net> wrote 
regarding Re: Realtek 8019 PnP Driver for OS/2:


> On Mon, 29 Nov 1999 16:03:31 GMT, Alex Thurgood wrote:

> >Hi All,
> >I'm a newbie to OS/2 networking and am having difficulties getting my
> >OS/2 WSEB to recognize my Realtek 8019 PnP card without bombing. I
> >installed the drivers from the diskette like it said in the
> >accompanying instructions, i.e. Using MPTS and LAPS, and it says the
> >card is correctly configured with the required protocols (TCP/IP and
> >Netbios) on adapter 0. Save, exit, reboot, load PnP ISA network card,
> >then the system hangs. There must be a conflict with some other
> >hardware (I think it's the disk drive), but I can't seem to turn off
> >the PnP Bios autoconfiguration, even when I go into the BIOS setup 
and
> >disactivate it. Anyone got any ideas ?
> >

>    Here are a couple of ideas...

>    First, make sure, in your BIOS settings, that any setting like 'PNP
> Operating System' or anything like that is turned OFF. Then boot OS/2, 
and
> when the OS/2 blurb (in the upper left corner) appears, hit <Alt-F1>. 
A menu
> comes up, hit <F5> - enable hardware detect. See if OS/2 boots then.

>    If not, you probably have a hardware conflict, or driver problem. 
Reboot
> OS/2, when the blurb appears hit <Alt-F2>. This will list each driver 
as it
> is loaded. When it hangs, look at the last driver loaded. This may 
give you a
> clue...

> Dave McKenna



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: CompuServe Interactive Services (1:109/42)

+----------------------------------------------------------------------------+

From: george.mccabe@gsfc.nasa.gov                       29-Nov-99 16:32:10
  To: All                                               30-Nov-99 10:24:19
Subj: shares tab disappeared in shared resources properties

From: George McCabe <george.mccabe@gsfc.nasa.gov>

hello,

the Shares tab in the Shared Resources and Connections - Properties
dialog box disappeared.  Identity, ?, Connections, Users, Groups, Icon
remain.  the network resources are available to LAN clients but no
longer can they be configured throught this interface.

any advice?

thanks, george

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: NASA Goddard Space Flight Center -- Greenbelt, Ma
(1:109/42)

+----------------------------------------------------------------------------+

From: alexthurgood@compuserve.com                       29-Nov-99 16:03:15
  To: All                                               30-Nov-99 11:23:03
Subj: Realtek 8019 PnP Driver for OS/2

From: Alex Thurgood <alexthurgood@compuserve.com>

Hi All,
I'm a newbie to OS/2 networking and am having difficulties getting my 
OS/2 WSEB to recognize my Realtek 8019 PnP card without bombing. I 
installed the drivers from the diskette like it said in the 
accompanying instructions, i.e. Using MPTS and LAPS, and it says the 
card is correctly configured with the required protocols (TCP/IP and 
Netbios) on adapter 0. Save, exit, reboot, load PnP ISA network card, 
then the system hangs. There must be a conflict with some other 
hardware (I think it's the disk drive), but I can't seem to turn off 
the PnP Bios autoconfiguration, even when I go into the BIOS setup and 
disactivate it. Anyone got any ideas ?

Thanks.

Alex.




--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: CompuServe Interactive Services (1:109/42)

+----------------------------------------------------------------------------+

From: matthickman@my-deja.com                           29-Nov-99 16:17:18
  To: All                                               30-Nov-99 11:23:03
Subj: Re: local LAN connection problems with 2 WARP4 systems

From: Matt Hickman <matthickman@my-deja.com>

In article <noenunzffcnepvfyarg.flvjcp0.pminews@news.isl.net>,
  "Lionel C. Abrahams" <abrahams@sparc.isl.net> wrote:
> On Fri, 26 Nov 1999 15:01:40 GMT, Matt Hickman wrote:
>
> >You might want to post the protocol.ini and the \mptn\bin\setup.cmd
> >from both Warp systems.
>
> Here they are:
<snip>

Looks like you are running both NETBeui and TCPBeui on both systems.
So if you are having problems with both FTP and file/print sharing,
you may have multiple problems.  That you can ping  system A
from B means you do have the NIC driver on B set up OK and you have
a certain level of TCP/IP connectivity. Can you telnet from B to A?
How about TFTP from B to A?  (Remember to set up the daemons on A).

I don't see anything which looks wrong with the setup.cmd's or the
protocol.ini's you posted.  When running Warp on your B system,
what do you see when you do a 'net start' at the command line?

Also please post your \ibmcom\lantran.log and your \ibmlan\ibmlan.ini
from your b system.

You might also run netstat on both systems and compare them.  The
-a, -i, -t, -s, -n and -r parameters should show if anything is wrong
with your TCP/IP configuration.


--
Matt Hickman
I don't even see how a four-dimensional coffee cup
could even hold coffee, much less a whole galaxy.
              - Robert A. Heinlein (1907-1988)


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: pjohann@c2i.net                                   30-Nov-99 21:52:11
  To: All                                               30-Nov-99 19:49:24
Subj: Peer Resources

From: "Per E. Johannessen" <pjohann@c2i.net>

After some changes of NIC's I now have trouble
making my 3 pc's find each other. Each workstation

boots just fine, binding protocols and adapters.
(Running Ethernet and coax cabling.)
However, when I start the program for connections
and sharing, Peer services only finds the local PC

I'm searching from. When typing in the name on
other
existing resources I get error message; unable to
find
network path, and sometimes SYS0053.
One machine once reported "error 0, YNARI" as
well.
I'm quite lost, so any help is welcome.


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Tele2 Norway AS Public Access (1:109/42)

+----------------------------------------------------------------------------+

From: thaimann@dmreg.infi.net                           30-Nov-99 16:31:13
  To: All                                               30-Nov-99 19:49:24
Subj: Re: networking os2 to Linux

From: "Terry Haimann" <thaimann@dmreg.infi.net>

Problem solved.  I forgot to put a entry in \etc\hosts for my os2 box.  I am
pretty unknowlegable when it comes to networking and am just slowly finding
my way around.  Thanks for your assistance.   Next step, get a XServer
running on my os23 box.

Thx Terry.

On Sat, 27 Nov 1999 21:51:43 -0500 (EST), Terry Haimann wrote:

>I went back to John Summerfield's Web page "setting up a home lan" and
>basically created a table to catorgize each setting.  With this informattion
>I made another attempt to set up the network.  Well I think I was
>succsessful, I can ping each machine from the other.  What I can't do is
>telnet from my os2 box to my linux box.  I beleive the problem is that Linux
>is using some sort of secure telnet deamon and os2 has just a standard telnet
>client.  I tryed d/l ssh for os2, but still can't connect to the linux
>machine.  If I can figure out how to setup Linux to use the standard telnet
>deamon and then set the allow file to local connections only, that is what I
>will probably do.
>
>I still need information as how to set up infi.net on Linux, this would allow
>both my Wife and I to internet at the same time.
>
>Thx	Terry
>
>On Sun, 28 Nov 1999 02:00:08 GMT, Matt Hickman wrote:
>
>>In article <unvznaaqzertvasvarg.flt6nb0.pminews@news.dmreg.infi.net>,
>>  "Terry Haimann" <thaimann@dmreg.infi.net> wrote:
>>> The problem is more basic then this, I can't get the 2 machines  to
>>connect
>>> and I beleive it is on the os2 side that I have the problem.
>>> Therefore I am looking for basic imfo as how to set up networking on
>>os2 to
>>> connect to linux, so far all I have managed to do is fry my internet
>>> connection.
>>>
>>
>>Install an ethernet Card on the Warp Machine. Install another ethernet
>>on the Linux machine. Make sure they both use the same type of cable.
>>Connect the machines using 10 baseT,thin ethernet, whatever.  Run
>>continuity test on the wire. Install a hub, if necessary. Design
>>IP with appropriate adresses, subnets et al.
>>
>>Run Peerinst (or install Samba).  Make sure you have the correct
>>driver for the card and there are no hardware conflicts.  Configure
>>TCP/IP. Ping yourself on the Warp machine.  Ping your Linux machine.
>>Use netstat on the Warp machine for troublershooting.
>>
>>
>>--
>>Matt Hickman
>>I don't even see how a four-dimensional coffee cup
>>could even hold coffee, much less a whole galaxy.
>>              - Robert A. Heinlein (1907-1988)
>>
>>
>>Sent via Deja.com http://www.deja.com/
>>Before you buy.
>
>
>



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: InfiNet (1:109/42)

+----------------------------------------------------------------------------+

From: mgreene@exis.net                                  30-Nov-99 17:50:19
  To: All                                               30-Nov-99 19:49:24
Subj: Re: Realtek 8019 PnP Driver for OS/2

From: "Michael K Greene" <mgreene@exis.net>

On Mon, 29 Nov 1999 16:03:31 GMT, Alex Thurgood wrote:

>Hi All,
>I'm a newbie to OS/2 networking and am having difficulties getting my 
>OS/2 WSEB to recognize my Realtek 8019 PnP card without bombing. I 
>installed the drivers from the diskette like it said in the 
>accompanying instructions, i.e. Using MPTS and LAPS, and it says the 
>card is correctly configured with the required protocols (TCP/IP and 
>Netbios) on adapter 0. Save, exit, reboot, load PnP ISA network card, 
>then the system hangs. There must be a conflict with some other 
>hardware (I think it's the disk drive), but I can't seem to turn off 
>the PnP Bios autoconfiguration, even when I go into the BIOS setup and 
>disactivate it. Anyone got any ideas ?

Boot to a DOS prompt and run the (????) setup166.exe program disk for your
card. I had my 8019 set for IRQ 11 and Port 340. I used the Eagle Tech driver
in MPTS setup.


>Thanks.
>
>Alex.
>
>
>
>

Michael K Greene <mgreene@exis.net>     |      OS/2 Warp / Linux / Win95-311



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Exis Net Inc (1:109/42)

+----------------------------------------------------------------------------+

From: abrahams@sparc.isl.net                            30-Nov-99 16:50:07
  To: All                                               01-Dec-99 00:35:05
Subj: Re: local LAN connection problems with 2 WARP4 systems

From: "Lionel C. Abrahams" <abrahams@sparc.isl.net>

On Mon, 29 Nov 1999 16:17:37 GMT, Matt Hickman wrote:

>In article <noenunzffcnepvfyarg.flvjcp0.pminews@news.isl.net>,
>  "Lionel C. Abrahams" <abrahams@sparc.isl.net> wrote:
>> On Fri, 26 Nov 1999 15:01:40 GMT, Matt Hickman wrote:
>>
>> >You might want to post the protocol.ini and the \mptn\bin\setup.cmd
>> >from both Warp systems.
>>
>> Here they are:
><snip>
>
>Looks like you are running both NETBeui and TCPBeui on both systems.
>So if you are having problems with both FTP and file/print sharing,
>you may have multiple problems.  That you can ping  system A
>from B means you do have the NIC driver on B set up OK and you have
>a certain level of TCP/IP connectivity. Can you telnet from B to A?
>How about TFTP from B to A?  (Remember to set up the daemons on A).
>
>I don't see anything which looks wrong with the setup.cmd's or the
>protocol.ini's you posted.  When running Warp on your B system,
>what do you see when you do a 'net start' at the command line?
>
>Also please post your \ibmcom\lantran.log and your \ibmlan\ibmlan.ini
>from your b system.
>
>You might also run netstat on both systems and compare them.  The
>-a, -i, -t, -s, -n and -r parameters should show if anything is wrong
>with your TCP/IP configuration.
>
>
>--
>Matt Hickman
>I don't even see how a four-dimensional coffee cup
>could even hold coffee, much less a whole galaxy.
>              - Robert A. Heinlein (1907-1988)
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.

Mat,
I went back and read the readme in the first disk of W08620B1.DSK
where it mentioned
about a couple of files which were moved and to rename/delete the
obsolete ones.  Well
I checked and my old files were still there (on both systems).  I
guess due to my libpath
the old ones were being found first...
To make a long story short, after I made the appropriate deletions,
my tcpip connections worked ok
both ways FTP A->B and B->A :-)

But the Print & File Object on system B still was broken (Nothing
in the  network tab in its properties)
I re-installed it, and now I do have a network tab which now shows
that the Network is unavailable.
So I need one last shove to get that up (B->A). On system A it
still shows the Network is available.

Thanks for the help.
...Posted with PMINews 2.00.1200
   using OS/2 WARP4 @FP12




  -----------== Posted via Newsfeeds.Com, Uncensored Usenet News ==----------
   http://www.newsfeeds.com       The Largest Usenet Servers in the World!
------== Over 73,000 Newsgroups - Including  Dedicated  Binaries Servers
==-----

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Newsfeeds.com http://www.newsfeeds.com 73,000+ UN
(1:109/42)

+----------------------------------------------------------------------------+

From: loosehg@usa.net                                   30-Nov-99 23:50:09
  To: All                                               01-Dec-99 00:35:05
Subj: 1234567890 TEST DONT OPEN  7252

From: loosehg@usa.net

test only
ccnmvdsgmpeltjiyhqdrvekubznqienoxumcjmtpcwzsjjbnjjgpplvopdzsrlnbgiikbpwywwzxldt
lnyxxlujhlovwxi

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network Canada (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           30-Nov-99 15:15:11
  To: All                                               01-Dec-99 00:35:05
Subj: Re: shares tab disappeared in shared resources properties

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Mon, 29 Nov 1999 21:32:21, George McCabe 
<george.mccabe@gsfc.nasa.gov> wrote:

> hello,
> 
> the Shares tab in the Shared Resources and Connections - Properties
> dialog box disappeared.  Identity, ?, Connections, Users, Groups, Icon
> remain.  the network resources are available to LAN clients but no
> longer can they be configured throught this interface.
> 
> any advice?
> 

The "Shares" tab only appears if you are logged on
as a "local administrator" for the machine. The ID and
password set up when installing the network software is
the "local administrator".

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: george.mccabe@gsfc.nasa.gov                       30-Nov-99 10:53:20
  To: All                                               01-Dec-99 00:35:06
Subj: Re: shares tab disappeared in shared resources properties

From: George McCabe <george.mccabe@gsfc.nasa.gov>

Lorne,

thank you for the reply.  i modified user profiles recently and must have
deleted or redefined the 'local administrator' account.  do you know a way
to identify which user is local administrator, or to change the local
administrator.

george

Lorne Sunley wrote:

> On Mon, 29 Nov 1999 21:32:21, George McCabe
> <george.mccabe@gsfc.nasa.gov> wrote:
>
> > hello,
> >
> > the Shares tab in the Shared Resources and Connections - Properties
> > dialog box disappeared.  Identity, ?, Connections, Users, Groups, Icon
> > remain.  the network resources are available to LAN clients but no
> > longer can they be configured throught this interface.
> >
> > any advice?
> >
>
> The "Shares" tab only appears if you are logged on
> as a "local administrator" for the machine. The ID and
> password set up when installing the network software is
> the "local administrator".
>
> --
>
> Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: NASA Goddard Space Flight Center -- Greenbelt, Ma
(1:109/42)

+----------------------------------------------------------------------------+

From: george.mccabe@gsfc.nasa.gov                       30-Nov-99 10:52:16
  To: All                                               01-Dec-99 00:35:06
Subj: Re: Losing network path?

From: George McCabe <george.mccabe@gsfc.nasa.gov>

jon,

from the errors you describe, sounds like your connection to the network has
gone down.  when browsing and email fails next time, try to ping your ISP's
name server to verify that the you have network access.  if that ping fails,
then ping yourself. if necessary contact tech support at your ISP and tell
them your conection is bad.

one other thing, if this failure always occurs after a set amount of time
then i'ld look into power saving features which might be turned on in your
system.

george

Jon Cleveland wrote:

> Hi. I don't know much about networking at all, but here is my problem.
> I have a cable modem and it works great after boot up, but after I've
> been on for about an hour or so, my browser and my e-mail program seem
> to lose the path. No matter what url I try to connect to Netscape gives
> an error message saying can't find the page. So I try my e-mail program,
>
> it reports the server is unreachable. The DHCP monitor says I still have
> a valid
> lease. If I reboot all is well again. Any suggestions?
>
> Jon Cleveland

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: NASA Goddard Space Flight Center -- Greenbelt, Ma
(1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           30-Nov-99 18:39:19
  To: All                                               01-Dec-99 00:35:06
Subj: Re: shares tab disappeared in shared resources properties

From: lsunley@mb.sympatico.ca (Lorne Sunley)

Posted and E-Mailed

Hi,

Outside of using the "local logon" and starting up UPMACCTS and trying
to
modify other user accounts. If it lets you do it the acccount you have
used to logon is an admin account.

I don't know of any way to change the local admin account unless  you 
are
logged in as the local admin.

If you are running on a Warp Server network, I was able to fake out a
system once by changing the IBMLAN.INI file to "forward" account
verification to the Domain Controller (Bit 37 in WRKHEURISTICS and use
the
"Local Logon" to log on as one of the LAN administrator accounts. This
let
me alter the local net.acc file accounts and get around the problem.

You can also replace the net.acc file with another one as long as the
requestor has not been started. The one created at installation time
should be in the \ibmlan\install directory. If you do this you have to
re-enter any changes made since installation.

Lorne

On Tue, 30 Nov 1999 15:53:41, George McCabe 
<george.mccabe@gsfc.nasa.gov> wrote:

> Lorne,
> 
> thank you for the reply.  i modified user profiles recently and must have
> deleted or redefined the 'local administrator' account.  do you know a way
> to identify which user is local administrator, or to change the local
> administrator.
> 
> george
> 
> Lorne Sunley wrote:
> 
> > On Mon, 29 Nov 1999 21:32:21, George McCabe
> > <george.mccabe@gsfc.nasa.gov> wrote:
> >
> > > hello,
> > >
> > > the Shares tab in the Shared Resources and Connections - Properties
> > > dialog box disappeared.  Identity, ?, Connections, Users, Groups, Icon
> > > remain.  the network resources are available to LAN clients but no
> > > longer can they be configured throught this interface.
> > >
> > > any advice?
> > >
> >
> > The "Shares" tab only appears if you are logged on
> > as a "local administrator" for the machine. The ID and
> > password set up when installing the network software is
> > the "local administrator".
> >
> > --
> >
> > Lorne Sunley
> 


--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: jari.myllys@pp.inet.fi                            01-Dec-99 18:40:08
  To: All                                               01-Dec-99 20:38:00
Subj: Slow perfomance in networkg when printing

From: jari.myllys@pp.inet.fi

We have 7 computer in network and one is the gateway to host and
application server. In this computer holds whole databases and other
computers use it from there. When some computer do report to printer
(they's own local printer), whole network perfomance go down! LAN is
make with token ring adapter and IBM cabling systems. The db-software is
latest Oracle db-server and client's. Protocol is netbios. There is not
really LANserver  software, only some computer share own printer to some
other with peer to peer.
Can i get help from anybody? Thank's!

Jari Myllys
email: jari.myllys@pp.inet.fi


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Sonera Corporation iNet Services (1:109/42)

+----------------------------------------------------------------------------+

From: gsf@ibm.net                                       01-Dec-99 21:46:00
  To: All                                               01-Dec-99 20:38:00
Subj: Re: NAT/Firewall: InJoy or TCP/IP 4.2?

From: Gilbert Saint-flour <gsf@ibm.net>

In <UHWNLebtzuSx-pn2-0ZDFE8OhltHL@localhost>, on 29 Nov 1999 at 19:05,
ThisSpaceLeftBlank@pacbell.net said:

> I am a registered user of Injoy Firewall 1.2. .... I was not able
>to get Injoy Firewall 1.2 to portmap the outside world to my www
>server on port 80. 

I had the same problem early on also.  The port mapping function is not
available with the standard version, you need the professional version. 
IMHO, less people would be confused if the standard version was called
"InJoy Gateway" and the professional version "InJoy Firewall".

Another thing which I found very confusing is the system of multiple
config files (there are seven of them I believe).  First of all, IJF
doesn't tell you which files it reads; then, if you put the commands in
the wrong file, it doesn't produce error messages, it simply ignores the
misplaced commands!

>..... I have contacted the author of the program and seems he has
>little patience to those of lesser knowledge and was kinda rude. 

Sounds like good'ol Bjarne alright!

>I noticed that there is a mailing list for Injoy and Injoy Connect but
>not the Injoy firewall. If there was such an area I would have posted  my
>response there.

I was confused by this also.  Discussions on IJF take place on the InJoy
Dialer list; I suggest you subscribe to it.  Once it's up and running, IJF
is a great program.

 Gilbert Saint-flour

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: @Home Network (1:109/42)

+----------------------------------------------------------------------------+

From: mads@troest.NEVERMORE.dk                          01-Dec-99 23:13:18
  To: All                                               01-Dec-99 21:37:13
Subj: Changing domain-name of existing domain with Aurora?

From: mads@troest.NEVERMORE.dk (Mads Orbesen Troest)

Hi;

I have a problem: my internal domain name has changed, and my domain 
controller is an OS/2 Warp Server for eBusiness. Apparently, there 
seems to be no way of changing domain name without reinstalling the 
server - can this really be??? I tried to create a new domain 
(thinking I'd delete the old when done), but no go; Aurora just 
complains that it cannot find a domain controller on the new domain, 
and aborts.

I'd really appreciate if anyone could suggest a solution to me. Thanks
in advance.

   These were the incoherent ramblings of ...
      ... /\/\\ads Orbesen Troest <mads@troest.NEVERMORE.dk>
            [http://www.sprog.auc.dk/~motr96]

(Please remove NEVERMORE from address when replying via email...)

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: SIRIUS Cybernetics (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           02-Dec-99 03:53:22
  To: All                                               02-Dec-99 03:28:00
Subj: Re: Changing domain-name of existing domain with Aurora?

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Wed, 1 Dec 1999 23:13:36, mads@troest.NEVERMORE.dk (Mads Orbesen 
Troest) wrote:

> Hi;
> 
> I have a problem: my internal domain name has changed, and my domain 
> controller is an OS/2 Warp Server for eBusiness. Apparently, there 
> seems to be no way of changing domain name without reinstalling the 
> server - can this really be??? I tried to create a new domain 
> (thinking I'd delete the old when done), but no go; Aurora just 
> complains that it cannot find a domain controller on the new domain, 
> and aborts.
> 
> I'd really appreciate if anyone could suggest a solution to me. Thanks
> in advance.

There is a program called CHGSRVR.EXE that lives in
the \IBMLAN\NETPROG that is supposed to be
able to change the server name for the domain
controller.

As far as changing the domain name for the server
goes, I just changed mine to FREDS and I can
logon with no problem.

Take down the entire network (at least all the servers)

Edit the IBMLAN.INI file in \IBMLAN directory and
change the DOMAIN=????? line to your new
domain name on the Primary Domain Controller.

Then change the name on any additional servers.

And then run around to all the
workstations and change it there as well.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: klcroxen@fas.harvard.edu                          02-Dec-99 14:33:08
  To: All                                               02-Dec-99 15:58:12
Subj: Re: Slow perfomance in networkg when printing

From: klcroxen@fas.harvard.edu (Kevin Croxen)

Maybe the problem isn't in your networking, but in your printing.
Printing locally or through a shared printer, depending on the 
printer, could involve so much CPU overhead that there's not 
enough left over do other tasks like networking in a satisfactory 
fashion.

Since you mention that some printing is already being done through 
peer sharing, perhaps you would do better by setting up one machine 
as a dedicated print server, with a quality printer and with the whole 
workgroup doing their printing to that machine. There is still the 
possibility that large print jobs being spooled into the print-server's 
queue will generate enough traffic to slow the network down, but 
it doesn't really sound like the network traffic itself is your current 
bottleneck.

--Kevin 

On Wed, 01 Dec 1999 18:40:16 GMT, jari.myllys@pp.inet.fi 
<jari.myllys@pp.inet.fi> wrote:
>We have 7 computer in network and one is the gateway to host and
>application server. In this computer holds whole databases and other
>computers use it from there. When some computer do report to printer
>(they's own local printer), whole network perfomance go down! LAN is
>make with token ring adapter and IBM cabling systems. The db-software is
>latest Oracle db-server and client's. Protocol is netbios. There is not
>really LANserver  software, only some computer share own printer to some
>other with peer to peer.
>Can i get help from anybody? Thank's!
>
>Jari Myllys
>email: jari.myllys@pp.inet.fi
>
>

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Harvard University, Cambridge, Massachusetts (1:109/42)

+----------------------------------------------------------------------------+

From: chong_jin@pacific.net.sg                          02-Dec-99 23:14:23
  To: All                                               02-Dec-99 15:58:13
Subj: Tiberian Sun Networking setup

From: Melvin Tan <chong_jin@pacific.net.sg>

Hello guys got some problems playing TS with multi players

Got the following equipment

3 HP Vectra 7 series running PII 233 with 64 SDRAM
1 Acer Deskpro running PII 350 with 96 SDRAM
2 pcs 8 Port Eternet Hub


Want to play four multi-player but usually will tell me connection error

half way throught the game.

Able to play 3 players with one hub and 3 HP Vectra 7 with no problem

Do not wish to go thr our company server as we are afraid that it will
damage our server

Any advise guys



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Subscriber of Pacific Internet (1:109/42)

+----------------------------------------------------------------------------+

From: sonalar@sonalar.es                                02-Dec-99 16:43:10
  To: All                                               02-Dec-99 16:42:03
Subj: Ethernet soft para MS-DOS

From: "Javier Alcaraz" <sonalar@sonalar.es>

    hola grupo...


    Estoy buscando un software antiguo para redes de rea local que
trabajaba en DOS llamado:

    NETWORK-OS PLUS V7.20

    El fabricante de este programa era CBIS, Inc. pero me parece que han
desaparecido del planeta tierra.

    Serva para controlar unas tarjetas de red Ethernet, en concreto el
modelo de tarjeta era el Western Digital WD-8003E (s WD no slo haca
discos duros).

    He intentado buscar por todas partes pero no me he comido ni una rosca;
si alguien sabe algn dato sobre el programa, se lo agradecer eternamente.


Javier Alcaraz
sonalar@sonalar.es







--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Telefonica Transmision de Datos (1:109/42)

+----------------------------------------------------------------------------+

From: mads@troest.NEVERMORE.dk                          02-Dec-99 18:59:24
  To: All                                               02-Dec-99 16:42:03
Subj: Re: Changing domain-name of existing domain with Aurora?

From: mads@troest.NEVERMORE.dk (Mads Orbesen Troest)

On Thu, 2 Dec 1999 03:53:44, lsunley@mb.sympatico.ca (Lorne Sunley) 
wrote:

> As far as changing the domain name for the server
> goes, I just changed mine to FREDS and I can
> logon with no problem.

Thanks for your response, I shall put it to the test shortly! :-)

   These were the incoherent ramblings of ...
      ... /\/\\ads Orbesen Troest <mads@troest.NEVERMORE.dk>
            [http://www.sprog.auc.dk/~motr96]

(Please remove NEVERMORE from address when replying via email...)

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: SIRIUS Cybernetics (1:109/42)

+----------------------------------------------------------------------------+

From: bj@fx.dk                                          02-Dec-99 21:03:26
  To: All                                               02-Dec-99 16:42:03
Subj: Re: NAT/Firewall: InJoy or TCP/IP 4.2?

From: Bjarne Jensen <bj@fx.dk>

>IMHO, less people would be confused if the standard version
>was called  "InJoy Gateway" and the professional version
>"InJoy Firewall".

Originally it was actually called the InJoy Gateway, but
that gave a lot of confusion too. One problem was that a
top-level name was needed to cover both versions (of the
same program) and we didn't want two sets of docs, web and
purchase options.

> Another thing which I found very confusing is the system of
>multiple config files (there are seven of them I believe).
>First of all, IJF  doesn't tell you which files it reads;

The documentation clarifies what files to use and even the
comments in the top of the files tell fairly clear what they
are used for..

>then, if you put the commands in the wrong file, it doesn't
>produce error messages, it simply ignores the misplaced
>commands!

That would be because your file included the information
needed by the firewall, so the firewall doesn't read the
rest of the file looking for displaced firewall rules.
If you put rules into files, by random, then you are
gonna get into problems with a lot of software though..

> >..... I have contacted the author of the program and seems he
> >has little patience to those of lesser knowledge and was
> >kinda rude.
> Sounds like good'ol Bjarne alright!

I don't think that's fair to say, but some people think they
know exactly how we should create our software and if we decline
their idea (which we obviously sometimes have to), then the
person will either understand, but some don't.

--
Bjarne Jensen
F/X Communications
http://www.fx.dk


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: cbrace@lim.nl                                     02-Dec-99 21:35:21
  To: All                                               02-Dec-99 19:45:01
Subj: Remote login w/ in-joy, no DNS

From: cbrace@lim.nl

Hi all,

I am on the road and trying to login remotely via my laptop using In-Joy
(v2). I can login into uunet and get a tcpip connection running, but for
some reason DNS doesn't work: I can only ping numeric IP addresses, and
I can't get mr2ice to poll by POP account, nor use Netscape ("server not
found" error msg).

When I run TCPSTART, I see something about "set to LAN only" flash by,
and I am wondering if the TCPIP settings are confused by the fact I was
using Peer services at home. In any case, I deleted PEER stuff from
MPTS. Still no go.

I am at a loss (and currently using a computer in an Internet cafe).
Anyone have any suggestions?


Sent via Deja.com http://www.deja.com/
Before you buy.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Deja.com - Before you buy. (1:109/42)

+----------------------------------------------------------------------------+

From: wsrue@ATTGlobal.net                               02-Dec-99 22:02:05
  To: All                                               03-Dec-99 03:35:07
Subj: DSL Not Always On

From: "Walter S. Rue" <wsrue@ATTGlobal.net>

Maybe I was imagining it, but I was sure that the BellAtlantic rep I
spoke with about their DSL service said that OS/2 was supported.  In the
install kit they sent, the CD with only Win software on it was the first
ominous sign, then the instruction booklets with only Win related
instructions in it, finally the voiced denial by their reps when I
phoned back to confirm.  

They require a special signon after the TCP/IP (DHCP) connection using
proprietary software from IVasion named PoET, to be repeated at the
beginning of each session (even though the line is non-switched). 
IVasion products are exclusively Win9x & NT.  No static IP options.  So
much for "always on".

Might this signon after all be a standardized process available in the
likes of InJoy?  Has anyone else worked around a similar problem?

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)

+----------------------------------------------------------------------------+

From: David @ Thackernet.com                            03-Dec-99 04:31:29
  To: All                                               03-Dec-99 03:35:08
Subj: Re: DSL Not Always On

From: "David Thacker" <David @ Thackernet.com>

Walter,

Longshot:
Perhaps it is possible to run the PoET Win32 app using Odin, the project
that is attempting to make it possible to run Win32 program natively in
OS/2.  Worth a try at least.  http://www.netlabs.org/odin/

More Likely:
The name PoET sorta leads me to think PPP over Ethernet, which is the DSL
protocol now used by Bell Sympatico in Eastern Canada.  Perhaps you could
try an OS/2 implementation of PPPoE to see if that is what PoET is actually
doing?  Here is a snip from an earlier posting in this newsgroup:
--
Link Guard Solutions is proud to present new beta of SafeFire PPP.

0.9.58 beta gives PPP over Ethernet access for OS/2 users for only $15
(Value
version)
Now SafeFire PPP is working with Sympatico Canada ISP.

Check Link Guard solutions homepage (http://www.lgs.kiev.ua) to get Your
copy.

If you like SafeFire firewall you can buy your copy at The GammaTech Mall
(http://www.gt-mall.com/cgi-bin/w3-msql/gtmall/search.html?&opt=find&stext=S
afeF
ire)
--

Good luck!

dAvid tHacker



Walter S. Rue <wsrue@ATTGlobal.net> wrote in message
news:384732B3.653FDAB2@ATTGlobal.net...
> Maybe I was imagining it, but I was sure that the BellAtlantic rep I
> spoke with about their DSL service said that OS/2 was supported.  In the
> install kit they sent, the CD with only Win software on it was the first
> ominous sign, then the instruction booklets with only Win related
> instructions in it, finally the voiced denial by their reps when I
> phoned back to confirm.
>
> They require a special signon after the TCP/IP (DHCP) connection using
> proprietary software from IVasion named PoET, to be repeated at the
> beginning of each session (even though the line is non-switched).
> IVasion products are exclusively Win9x & NT.  No static IP options.  So
> much for "always on".
>
> Might this signon after all be a standardized process available in the
> likes of InJoy?  Has anyone else worked around a similar problem?


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: mdtaylor@mdtaylor.com                             03-Dec-99 08:19:20
  To: All                                               03-Dec-99 05:15:15
Subj: networking help if possible

From: "Dean Taylor" <mdtaylor@mdtaylor.com>

I am using a standard network kit with hub between two machines
installation i think is o.k !!  BUT...

Although I can browse the files say on machine 1 via machine 2

I CANNOT open them.

In other words i can look at folders and see what is in them but cannot open
the document itself

EXAMPLE

I OPEN A FOLDER CALLED TEST ON MACHINE 2 VIA MACHINE 1
INSIDE THE FOLDER TEST IS A MS WORD FILE  THIS WILL NOT OPEN AND CAUSED THE
SCREEN ON THE COMPUTER TO FREEZE !

THE SAME APPLIES WITH PHOTO SHOP FILES I CAN'T ACTUALLY PROCESS THE ACTUAL
FILE AND SEE ITS CONTENTS!

I HAVE ALLOWED FULL ACCESS ON BOTH MACHINES AND DISABLED ALL PASS WORDS

MACHINE 1 HAS THE SECOND EDITION OF WINDOWS 98 AND MACHINE 2 THE FIRST

CAN ANY ONE HELP PLEASE !?????

--
************************
     e-mail from:

       M D Taylor

  mdtaylor@mdtaylor.com
*************************


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: rauscher@mjoelnir.botanik.biolog...               03-Dec-99 11:44:16
  To: All                                               03-Dec-99 10:26:27
Subj: Groups in a peer to peer network

Message sender: rauscher@mjoelnir.botanik.biologie.uni-muenchen.de

From: rauscher@mjoelnir.botanik.biologie.uni-muenchen.de (Rauscher Guenter)

Dear OS/2 users,

we have a very heterogenous network with UNIX, PC's (Win95/98,311), Macs
and OS/2 (Warp4) computers. It is possible to communicate from OS/2 via peer 
services with PC's and UNIX (Samba).
Since the network became so large (> 150 PC's) we made groups in the 
Microsoft network and the OS/2 conputers are also members of any group.

It is no problem to communicate from a OS/2 computer to other computers
in a group. But it is not possible to connect to a member of an other 
group. The peer services of OS/2 interprtes the groups of microsoft 
network as a domain. I can not immediately write the connection mask
(e.g. \\orpheus\C ) but I can only select the hosts which are shown.

Is there a possibility to write the desidet connectin to a file and 
give a command to execute it?

Guenter Rauscher


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: [posted via] Leibniz-Rechenzentrum, Muenchen (Ger
(1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           03-Dec-99 15:22:27
  To: All                                               03-Dec-99 14:33:06
Subj: Re: networking help if possible

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Fri, 3 Dec 1999 08:19:40, "Dean Taylor" <mdtaylor@mdtaylor.com> 
wrote:

> I am using a standard network kit with hub between two machines
> installation i think is o.k !!  BUT...
> 
> Although I can browse the files say on machine 1 via machine 2
> 
> I CANNOT open them.
> 
> In other words i can look at folders and see what is in them but cannot open
> the document itself
> 
> EXAMPLE
> 
> I OPEN A FOLDER CALLED TEST ON MACHINE 2 VIA MACHINE 1
> INSIDE THE FOLDER TEST IS A MS WORD FILE  THIS WILL NOT OPEN AND CAUSED THE
> SCREEN ON THE COMPUTER TO FREEZE !
> 
> THE SAME APPLIES WITH PHOTO SHOP FILES I CAN'T ACTUALLY PROCESS THE ACTUAL
> FILE AND SEE ITS CONTENTS!
> 
> I HAVE ALLOWED FULL ACCESS ON BOTH MACHINES AND DISABLED ALL PASS WORDS
> 
> MACHINE 1 HAS THE SECOND EDITION OF WINDOWS 98 AND MACHINE 2 THE FIRST
> 
> CAN ANY ONE HELP PLEASE !?????
> 

If you want networking help on this newsgroup you
will have to erase all copies of Windows 98 and
install OS/2 Warp 4 or Warp Server for e-Business.
This software is available from IBM and should 
correct your network problems.

This is an OS/2 newsgroup not a Windows newsgroup.

Windows 9X Peer to Peer networking is prone to
random lockups and other problems. Try random
settings and re-installing Windows over and over
again until you give up and use different network
cards. Make sure you have a good backup of
all critical data files. Contact the network card
manufacturer and find out if there are updated
drivers. Erase all network drivers and Protocols
from the control panel and try the add new hardware.
Backup all files, format drive C on each machine and
install Windows 98 with the network cards in the
machine, adding network cards to Windows after
it is installed usually causes problems. Throw
your mouse through the wall and write on the
blackboard 1000 times 
"I wll not use Windows Networking ever again"
Download Linux and try it out on both machines
if this works then your hardware is OK and you
can be sure the problems is Windows. Obtain
Star Office and Gimp for Linux and never use
Windows again. Buy OS/2, install in both machines
obtain Star Office and Gimp/2 for OS/2  and never 
use Windows again.

The preceding workarounds were taken from
real life situations only the names were changed
to protect the innocent. :-)

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: cstumpf@monmouth.com                              03-Dec-99 10:27:11
  To: All                                               03-Dec-99 14:33:06
Subj: Re: DSL Not Always On

From: "Chris Stumpf" <cstumpf@monmouth.com>

On Fri, 03 Dec 1999 04:31:59 GMT, David Thacker wrote:

:>Walter,
:>
:>Longshot:
:>Perhaps it is possible to run the PoET Win32 app using Odin, the project
:>that is attempting to make it possible to run Win32 program natively in
:>OS/2.  Worth a try at least.  http://www.netlabs.org/odin/
:>
:>More Likely:
:>The name PoET sorta leads me to think PPP over Ethernet, which is the DSL
:>protocol now used by Bell Sympatico in Eastern Canada.  Perhaps you could
:>try an OS/2 implementation of PPPoE to see if that is what PoET is actually
:>doing?  Here is a snip from an earlier posting in this newsgroup:
:>--

Or you could use InJoy firewall with the PPPOE plugin.  No sense in buying
another piece of software if a simple plugin will work.  I'm very interested
to see if this works because I am planning on getting a dsl connection from
bell atlantic around feb/march.  Stuff like this really pisses me off.  Why
the f*ck do they feel the need to take such measures to exclude other OS's. 
I wouldn't be surprised if they have a deal with MS to do this.


		Chris Stumpf
		C.S.E. Computer Services
		Computer Consultant (OS/2, Lan, Wan, CTI)
		Serenity Systems Channel Partner
		IBM Certified Systems Expert - OS/2 Warp 4
		

web:    http://cse.anterras.net
email:	cse@anterras.net
phone: (732)918-2480



--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: Monmouth Internet (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           03-Dec-99 15:27:19
  To: All                                               03-Dec-99 14:33:06
Subj: Re: Groups in a peer to peer network

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Fri, 3 Dec 1999 11:44:32, 
rauscher@mjoelnir.botanik.biologie.uni-muenchen.de (Rauscher Guenter) 
wrote:

> 
> Dear OS/2 users,
> 
> we have a very heterogenous network with UNIX, PC's (Win95/98,311), Macs
> and OS/2 (Warp4) computers. It is possible to communicate from OS/2 via peer 

> services with PC's and UNIX (Samba).
> Since the network became so large (> 150 PC's) we made groups in the 
> Microsoft network and the OS/2 conputers are also members of any group.
> 
> It is no problem to communicate from a OS/2 computer to other computers
> in a group. But it is not possible to connect to a member of an other 
> group. The peer services of OS/2 interprtes the groups of microsoft 
> network as a domain. I can not immediately write the connection mask
> (e.g. \\orpheus\C ) but I can only select the hosts which are shown.
> 
> Is there a possibility to write the desidet connectin to a file and 
> give a command to execute it?
> 

The IBMLAN.INI file contains a parameter "OTHDOMAINS"
that can be used to list other domains "groups" that can
be accessed from the OS/2 workstations. List any oher
groups you want to access.

OTHDOMAINS = group1, group2, group3, etc

The ibmlan.ini file lives in the \IBMLAN directory.
The "othdomains" parameter is in the "[requester}"
group of parameters.

--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: mdtaylor@mdtaylor.com                             03-Dec-99 17:02:13
  To: All                                               03-Dec-99 14:33:06
Subj: HELP PLEASE ON SIMPLE NETWORKING

From: "Dean Taylor" <mdtaylor@mdtaylor.com>

FIRSTLY I AM A COMPLETE NOVICE !!!!!!!

How do I move a file from my remote machine on to the one I am viewing it on
so i can open it.????????

I AM USING A HUB CONNECTION BETWEEN 2 OF MY COMPUTERS  ETC

I can see the files on my remote machine(machine2)-- but cannot open them on
the machine i am seeing them on !!(machine 1)
Can i open files for example photoshop ms word
am i allowed to print them off then etc?????


Is there a way to get them across or do i drag and drop ??

I have given full access to all machines with no pass words installed as it
is only me who uses this network.

I run windows 98 on both machines
I would be grateful for any help.
--

--
************************
     e-mail from:

       M D Taylor

  mdtaylor@mdtaylor.com
*************************


--- WtrGate+ v0.93.p7 sn 165
 * Origin: Origin Line 1 Goes Here (1:109/42)

+----------------------------------------------------------------------------+

From: lsunley@mb.sympatico.ca                           03-Dec-99 17:13:17
  To: All                                               03-Dec-99 20:03:07
Subj: Re: HELP PLEASE ON SIMPLE NETWORKING

From: lsunley@mb.sympatico.ca (Lorne Sunley)

On Fri, 3 Dec 1999 17:02:27, "Dean Taylor" <mdtaylor@mdtaylor.com> 
wrote:

> FIRSTLY I AM A COMPLETE NOVICE !!!!!!!
> 
> How do I move a file from my remote machine on to the one I am viewing it on
> so i can open it.????????
> 
> I AM USING A HUB CONNECTION BETWEEN 2 OF MY COMPUTERS  ETC
> 
> I can see the files on my remote machine(machine2)-- but cannot open them on
> the machine i am seeing them on !!(machine 1)
> Can i open files for example photoshop ms word
> am i allowed to print them off then etc?????
> 
> 
> Is there a way to get them across or do i drag and drop ??
> 
> I have given full access to all machines with no pass words installed as it
> is only me who uses this network.
> 
> I run windows 98 on both machines
> I would be grateful for any help

Drag and drop should work

open up the network drive in explorer and
right click the file and select "copy"
and copy it to a folder on the local drive

You should be able to open the files you
see on the other machine from your application.

File -> Open then select the file

----------------------------------------------------------------------
---
IMPORTANT STUFF - READ THIS
----------------------------------------------------------------------
--

----------------------------------------------------------------------
-----------
copied from reply to an earlier post
----------------------------------------------------------------------
----------- 

If you want networking help on this newsgroup you
will have to erase all copies of Windows 98 and
install OS/2 Warp 4 or Warp Server for e-Business.
This software is available from IBM and should 
correct your network problems.

This is an OS/2 newsgroup not a Windows newsgroup.
 
Windows 9X Peer to Peer networking is prone to
random lockups and other problems. Try random
settings and re-installing Windows over and over
again until you give up and use different network
cards. Make sure you have a good backup of
all critical data files. Contact the network card
manufacturer and find out if there are updated
drivers. Erase all network drivers and Protocols
from the control panel and try the add new hardware.
Backup all files, format drive C on each machine and
install Windows 98 with the network cards in the
machine, adding network cards to Windows after
it is installed usually causes problems. Throw
your mouse through the wall and write on the
blackboard 1000 times 
"I wll not use Windows Networking ever again"
Download Linux and try it out on both machines
if this works then your hardware is OK and you
can be sure the problems is Windows. Obtain
Star Office and Gimp for Linux and never use
Windows again. Buy OS/2, install in both machines
obtain Star Office and Gimp/2 for OS/2  and never 
use Windows again.
 
The preceding workarounds were taken from
real life situations only the names were changed
to protect the innocent. :-)


--

Lorne Sunley

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: MBnet Networking Inc. (1:109/42)

+----------------------------------------------------------------------------+

From: jms%email.de%email.de%email.de@b...               03-Dec-99 20:10:24
  To: All                                               03-Dec-99 20:03:07
Subj: Re: NAT/Firewall: InJoy or TCP/IP 4.2?

Message sender: jms%email.de%email.de%email.de@bromo.email.ch

From: jms%email.de%email.de%email.de@bromo.email.ch (Jens)

http://www.lgs.kiev.ua/sfppp.html

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: JMS Consulting (1:109/42)

+----------------------------------------------------------------------------+

From: 75270_3703a@csi.com                               03-Dec-99 20:59:05
  To: All                                               03-Dec-99 20:03:07
Subj: Re: HELP PLEASE ON SIMPLE NETWORKING

From: 75270_3703a@csi.com (scott s.)

In message <944240550.1271.0.nnrp-02.d4e45bfc@news.demon.co.uk> - "Dean
Taylor"
<mdtaylor@mdtaylor.com> writes:
|
|I run windows 98 on both machines
|I would be grateful for any help.

Install warp 4 on both machines?  (Sorry couldn't help myself.)

But seriously I think some apps don't like network mapped disks.
You can move or copy a file from a network disk to a local one
using any of the normal methods.

scott s.
.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: CompuServe Interactive Services (1:109/42)

+----------------------------------------------------------------------------+

From: 75270_3703a@csi.com                               03-Dec-99 21:04:27
  To: All                                               03-Dec-99 20:03:07
Subj: Re: networking help if possible

From: 75270_3703a@csi.com (scott s.)

In message <qpkdVVNoMoTk-pn2-NRbXcBqdgNlC@tcpserver> - lsunley@mb.sympatico.ca
(Lorne Sunley) writes:

Throw
|your mouse through the wall and write on the
|blackboard 1000 times 
|"I wll not use Windows Networking ever again"
|Download Linux and try it out on both machines
|if this works then your hardware is OK and you
|can be sure the problems is Windows. Obtain
|Star Office and Gimp for Linux and never use
|Windows again. Buy OS/2, install in both machines
|obtain Star Office and Gimp/2 for OS/2  and never 
|use Windows again.
|

Makes sense to me!!!!!

scott s.
.

--- WtrGate+ v0.93.p7 sn 165
 * Origin: Usenet: CompuServe Interactive Services (1:109/42)

+----------------------------------------------------------------------------+

+============================================================================+
