PowerTape 2000 LDR 

This driver requires Microsoft's OS/2 1.3 or a comparable
version of OS/2 with LADDR.  If you have upgraded your OS/2
operating system since Sytos Plus was installed we recommend
that you review the README and re-install Sytos Plus.

Your SCSI host adapter driver must already be installed. 
The driver, identified by a .BID extension, will be included
with OS/2.

In order for Sytos Plus to access this backup device, the
following lines must appear in CONFIG.SYS, in the order
described:

   a. The Sytos Plus device driver (with a .VSD extension)
      for your device must be installed first:
         DEVICE=C:\SYPLUS\SYFILES\CML_1GBB.VSD.

   b. The tape drive driver must be installed second, and
      must appear only once:
         DEVICE=C:\OS2\SUPPORT\TAPE.TSD

1.  Exit Sytos Plus.

2.  Modify CONFIG.SYS to include the DEVICE= lines in
    the order described above.

3.  Shut down the system and reboot so that the changes to
    CONFIG.SYS can take effect.

If you have multiple tape drives of the same type, return to
"Utilities: Backup device setup" and "Edit" the device to
set up the multiple devices.
