Kofax Driver Kit
for Ricoh IS420 Video Scanners

*************************************************************************
*  (c) Copyright Kofax Image Products, 1995. All rights reserved.       *
*************************************************************************

This file contains information about the Ricoh IS420 video scanner driver 
kit. Included are important notes for using Ricoh IS420 video scanners 
with Kofax products, instructions for installing the drivers, and the 
addresses and phone numbers for Kofax Technical Support. 


==================================================================
Important Notes - Read This Section Before You Install the Drivers
==================================================================

KIPP Developers Toolkit Users
------------------------------
For KIPP Developers Toolkit users, you must upgrade to KIPP v2.12 before
you can use these drivers.  Contact Kofax or your Kofax distributor for
more information.


============
Driver Files
============

The scanner drivers and other files that you need to support Ricoh IS420 
video scanners are included in KRIS420V.EXE. (KRIS420V.EXE is a 
self-extracting, executable file.) 

To explode KRIS420V.EXE, copy it to a temporary directory and type 
KRIS420V.EXE.  KRIS420V.EXE contains these files:

   BICLDR.EXE
   BICLDR.DLL
   SCNAPI.DLL
   BPFUJISC.OUT
   BPFUJI75. OUT
   FUJISC75.BLF
   FUJISC.BLF


============
Installation
============

To install the drivers, the files listed above must be manually copied 
to the appropriate directories. The directories you must copy the files 
to depends on whether you are using KIPP ImageControls or the KIPP 
Developers Toolkit. Follow the steps in the sections below as appropriate 
for your needs.


==================
KIPP ImageControls
==================

Follow these steps to install the drivers and files for use with KIPP
ImageControls. By default, KIPP ImageControls is installed to C:\IMGCTLS,
although this could be different on your system.

   1.  Copy the new .DLL files to your ImageControls BIN directory.
   2.  Copy the new .OUT files to your ImageControls DRIVER directory.
   3.  Copy the new .BLF files to your ImageControls DRIVER directory.
   4.  Edit your KOFAX.INI file in your Windows directory as shown below.
	   Note that the line numbers indicated are approximate numbers. 
	   The actual line numbers may be different in your KOFAX.INI file.

	   a.  Find following comment (at approximately line 127) and add an
		   IS420V= entry to the [RICOH] section as shown below:
		   
		   ;Specify Ricoh selectable scanners.
		   [RICOH]
		   ...
		   IS410S=IS410SCSI
		   IS420V=IS420 Video
		   IS510V=IS510 Video
		   
	   b.  Find the following comment (at approximately line 146) and add
		   a [RICOH IS420V] section as shown below:

		   ;Specify Make/Model characteristics.
		   ...
		   [RICOH IS410]
		   [RICOH IS420V]
		   [RICOH IS50]

   5.  Reboot your system.
   6.  Use the Kofax Configuration Program from your Windows Control 
	   Panel to configure your scanners.


========================
KIPP Developers Toolkit
========================
   
Follow these steps to install the drivers and files for use with the KIPP
Developers Toolkit. By default, the KIPP Developers Toolkit is installed
to C:\KIPP, although this could be different on your system.

Note that you must have KIPP v2.12 installed on your system to use the
drivers.

   1.  Copy the new BICLDR.EXE file to your KIPP BIN directory.
   2.  Copy the new .OUT files to your KIPP DRIVER directory.
   3.  Copy the new .BLF files to your KIPP DRIVER directory.
   4.  Reboot your system.
   5.  From the KIPP BIN directory, run KIPPCFG to configure your
	   scanners.


==========
References
==========

	KIPP ImageControls Technical Reference Manual
	KIPP Developers Toolkit Technical Reference Manual


=======================
Kofax Technical Support
=======================

If you need further assistance, contact your Kofax distributor, or 
contact the Kofax Technical Support Staff at:

   Headquarters                  European Headquarters

   Kofax Image Products          Kofax Image Products
   3 Jenner Street               Rue Capouillet 19
   Irvine, CA 92718              1060 Brussels, Belgium

   (714) 727-1733 (voice)        +32-2-536-8630 (voice)
   (714) 727-1941 (rotary)       +32-2-536-8601 (fax)
   (714) 727-3144 (fax)          +32-2-536-8674 (BBS)
   (714) 727-3538 (BBS)

Or, you can use the following Kofax Internet connection:

   support@kofax.com

You can also use the Kofax QuickFax service to receive data sheets,
configuration guides, and other types of Kofax literature. The Kofax
QuickFax service is available 24 hours a day, 7 days a week. To use
QuickFax, dial the number below and follow the instructions presented
to you:

   (714) 727-0788 (QuickFax) 
