NOTE:	Most of these keys can be changed from the "Keyboard Settings" DialogBox.
-----	If you want to set them to default ones again, use the "Default" button inside
	Psycle's "keyboard and misc" configuration tab.
	Alternatively, go to your Windows folder (usually C:\Windows) ,
	delete the file "Psyclekeys.ini" , and reopen Psycle.



- Pattern RowFormat
===================

	not aux gen cmdval
	C-4  01  02  0484

	aux :	Depends on the plugin:
		For Sampler machine, it indicates the instrument(wave) number.
		For VSTi's it indicates the MIDI channel ( 0 = 1, 0F = 16)

- PlayBack
===========
	Key					Action
	---					------

	4					Play current track's Row
	8					Play Entire pattern's Row

	F5					Start Playback
	Shift+F5				Start Playback from the Song start.
	F6					Start Block Playback
	F7					Start Playback From Cursor
	F8					Stop Playback


- Navigation
=============
	Key					Action
	---					------

	SHIFT + UP/DOWN			Inc/Dec Pattern assigned to current SongPosition
	SHIFT + LEFT/RIGHT			Decrement/Increment Song Position.
						(Changes current editing pattern also)

	Cursors					Navigate in the pattern Editor.
	TAB/SHIFT + TAB			Goes to next/Previous Column (Track)
	PREV/NEXT PAGE			Move the Cursor 16 Lines Upwards/Downwards.
	HOME/END				- In IT (Impulse Tracker) Mode:
					  	Go to First/Last Row, if there go to First/Last
					  	track and if there, go to First/Last Line in pattern
						- In FT2 Mode:
					  	Go to First Line/Last Line
	CTRL + TAB				Maximize View (hide all toolbars)
	CTRL + RETURN			Show Pattern Properties.
	SHIFT + RETURN			Show Current Machine Properties.


	F2					Go to Machine View
	F3					Go to Pattern Editor
	F4					Reserved.
	F9					Open "New Machine" Dialog
	F10					Open "Instruments" Dialog
						THIS ONE CANNOT BE CHANGED, SORRY.


- Editing
==========
	Key					Action
	---					------

	Alphanumeric keys			Most of them are mapped to musical notes.
	1 in alphanumeric keys			add "off" note.
	Numbers (numpad)			Enter numbers, as usual.
	'					Insert tweak command [ twk param mach value]
						You might need to modify this key.
	CTRL + '				Insert tweak slide [ tws param mach value]
						You might need to modify this key.
	@					Insert mcm command [ mcm command mach value ]
						You might need to modify this key.
	* and / (numpad)			Move Up/Down one octave.
	SpaceBar				Toggle Edit Mode ON/OFF
	CTRL + F				Toggle Follow on/off
	CTRL + F1/F2				Note Transpose -1/1 in entire channel.
	CTRL + SHIFT + F1/F2			Note Transpose -12/12 in entire channel.
						** Pattern Transposing takes in account the LINE where
						** the cursor is. so you can half the pattern with just
						** putting the cursor on the half.
	CTRL + F11/F12			Notre Transpose -1/+1 in selected Block
	CTRL + SHIFT + F11/F12		Notre Transpose -12/+12 in selected Block
	CTRL + F3/F4 or F5			Cut, Copy or Paste pattern.
	CTRL + SHIFT + F3			Pattern Delete.
	CTRL + SHIFT + F5			Pattern mix paste.

	CTRL + F7				(un)Set current track to Record
	CTRL + F8				(un)Set current track to Solo
	CTRL + F9				(un)Set current track to mute
	Ins					Insert one Pattern Row.
	BACKSPACE				Delete one Pattern Row (Different behaviour depending on FT2 or IT style).
	DELETE					Clears Row content (in current track)
	CTRL + B/E				Begin/End Mark block. Note: ONLY WORKS IF "Shift+Arrows Do selection" is
						deactivated in the Keyboard configuration Dialog.
	CTRL + U				Unmark Block
	CTRL + D/H				Double/Halve the length of the block.
						If no block is selected, then it affects the whole pattern.
	CTRL + A				Select All Pattern
	CTRL + R				Select Column
	CTRL + K		`		Select Bar/Multiple Bars
	CTRL + X/C/V/M			Cut/Copy/Paste/Mix Paste selected Block.
	CTRL +SHIFT + X			Delete selected Block.
	CTRL + I				Interpolate block data (command/parameter column)
	CTRL + G				Change block Generator to current selected
	CTRL + T				Change block insTrument to current selected
	CTRL + LEFT/RIGHT			Dec/Inc current selected Generator/Effect
	CTRL + UP/DOWN			Dec/Inc current selected Instrument
	CTRL + Z				Undo Pattern/Sequencer edit
	CTRL + SHIFT + Z			Redo Pattern/Sequencer edit
	RETURN				Select the machine and instrument specified in the current Cursor position.

	[					Set Row Skip -1 when entering a note
	]					Set Row Skip +1 when entering a note

	SHIFT+Note				"Chord" mode. Enters note and moves to the next track.

	(numpad) : Numpad requires numlock lead ON or it will not work.