************************************************************
************************************************************
*
*  Intel(R) Security Driver Release Notes
*
*  NOTE:  This document refers to systems containing the 
*         following Intel chipsets:
*              Intel(R) 810  Chipset 
*              Intel(R) 810E Chipset
*              Intel(R) 815  Chipset 
*              Intel(R) 815E Chipset
*              Intel(R) 820  Chipset
*              Intel(R) 820E Chipset
*              Intel(R) 840  Chipset 
*
*  This document makes references to unannounced products 
*  being developed by Intel.  There are some restrictions 
*  on how these products may be used, and what information 
*  can be disclosed to others. Please read the Disclaimer
*  section at the bottom of this document, and contact your 
*  Intel field representative if you would like more 
*  information.
*
************************************************************
************************************************************


************************************************************
*       CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

Part 1 - About These Release Notes	
  Introduction	
  How Should I Proceed?	

Part 2 - Installation	
  Overview	
  Full Installation Procedure	
  Uninstalling the Driver Software and Documentation
  Simple Installation Procedure
  
Part 3 - Self Test Application	
  Overview	

Part 4 - Updated Information	
  Overview	
  New Features in This Release	
  Updated Product Information	
    Supported Hardware	
    Supported Operating Systems	

Part 5 - Troubleshooting	


************************************************************
* Part 1 -- About These Release Notes
************************************************************

*** Introduction ***

These release notes include installation information, 
procedures for running the Self Test Application included 
with the product, late-breaking information, and known 
problems in this release.


*** How Should I Proceed? ***

To quickly learn about the product, do the following:

1. Scan the remainder of these Release Notes to get familiar 
   with their contents.
2. Run the Installation procedure, described in 
   "Part 2 - Installation".
3. Run the Self Test application, described in 
   "Part 3 - Self Test Application".

************************************************************
* Part 2 - Installation
************************************************************

*** Overview ***

This section describes performing a full installation via an
InstallShield* wizard and a simple installation via .inf files.

Note
----
These installation procedures assume that you are installing 
the Intel Security Driver on a platform that contains either 
the Intel 810 or Intel 820 chipset.

*** Full Installation Procedure ***

To perform a complete installation of the Intel Security Driver 
and associated documentation (via InstallShield), do the following:

1. Run the installation setup program provided.

2. Setup will start the InstallShield* Wizard, which will 
   guide you through the rest of the setup.  

Following is supplementary information for each screen in the 
InstallShield setup Wizard.

* Welcome screen - exit all Windows* programs, according to 
  its recommendation, then click Next.
* Release Notes - these release notes.  click Next.
* Software License Agreement - read the agreement, then click Yes
  if you agree to the terms and conditions stated.
* Choose Destination Location - specify any drive or folder 
  on the local system, then click Next.
  (Do Not specify a network or removable drive!)
* Select Program Folder - Accept the default Program Folder 
  or specify a different folder, then click Next.  
  (Setup begins installing the product files.)
* Setup Complete - Click the appropriate button to restart 
  your computer now or later.  

3. Run the Self Test application, described in 
   "Part-3 Self Test Application".

*** Files Installed by the Full Installation Procedure

The full installation procedure installs the files listed below, 
where, in the following: 
 <drive> is the drive specified during installation 
    (C:, by default)
 <path>  is the path specified during installation 
    (\Program Files\Intel\Intel Security Driver, by default)

Driver Software Files
---------------------
File: ISECDRV.SYS (Microsoft Windows* NT* 4.0)
Install Path: \winnt\system32\drivers
Supplemental Information: Legacy Microsoft Windows NT 4.0 driver

File: ISECDRV.SYS (Microsoft Windows 98)
Install Path: \windows\system32\drivers
Supplemental Information: Microsoft wdm style driver

File: ISECDRV.VXD (Microsoft Windows 95)
Install Path: \windows\system
Supplemental Information: Microsoft Windows Plug and Play driver

Security Driver Self Test Files
--------------------------------
(See "Part 3 - Self Test Application" in these release notes)

File: SelfTest.exe
Install Path: <drive><path>\Sample Applications\SelfTest  
	(where <drive><path> are described above)
Supplemental Information: Self Test executable

File: SelfTest.ini
Install Path: <drive><path>\Sample Applications\SelfTest  
	(where <drive><path> are described above)
Supplemental Information: Self Test initialization file

File: SelfTest.log
Install Path: <drive><path>\Sample Applications\SelfTest  
	(where <drive><path> are described above)
Supplemental Information: Self Test log file

Documentation
-------------

File: SelfTest.hlp
Install Path: <drive><path>\Documents  
	(where <drive><path> are described above)
Supplemental Information: Online Help for Self Test

File: SelfTest.cnt
Install Path: Same as above
Supplemental Information: Contents file for SelfTest.hlp

*** Uninstalling the Driver Software and Documentation ***

To uninstall the Intel Security Driver and associated 
documentation (following a full installation), do the following:

1. Click Start | Settings | Control Panel.
2. Double-click the Add/Remove Programs icon.
3. Click the "Intel Security Driver" item in the list window, 
   then click the Add/Remove... button.

*** Simple Installation Procedure ***

To perform a simple installation of the Intel Security Driver 
(via .inf files), do the following:

1. Run the installation setup program provided.

2. Setup will start the InstallShield* Wizard, which will 
   guide you through the rest of the setup.  (See Step 2 under 
   "Full Installation Procedure" for information about the
   InstallShield Wizard setup screens.)

   Files installed by this procedure are listed below in 
   "Files Installed by the Simple Installation Procedure"

3. Do one of the following, depending on whether you are 
   installing on Microsoft Windows NT 4.0, Microsoft Windows 95, 
   or Microsoft Windows 98. (Note:  For more information about 
   Windows 2000 see "Supported Operating Systems.")

   Microsoft Windows NT 4.0
   ------------------------
   1.  Logon as the administrator.
   2.  Copy ISECDRV.SYS from the <drive>:<path>\WINNT4 directory to 
       \WINNT\SYSTEM32\DRIVERS
       where: 
       <drive> is the drive specified during installation (C, by default)
       <path>  is the path specified during installation 
               (\Program Files\Intel\Intel Security Driver, by default)
   3.  Edit the NTDriver.REG file to verify that the 
       Imagepath setting specifies the correct path to the WINNT 
       directory.
   4.  Run the NTDriver.REG file.
   5.  Restart the computer.
   6.  To determine if the driver is loaded and working properly,
       click Start|Settings|Control Panel, then double-click 
       the Devices icon.
   7.  In the list of Devices, locate the ISECDRV device. Verify 
       that its Status is "Started" and that Startup is set to 
       "Automatic."

   Microsoft Windows 95
   --------------------
   1.  Click Start|Settings|Control Panel.
   2.  Double-click the System Icon.
   3.  Select the Device Manager Tab on the System Properties 
       dialog box.
   4.  Double-click the Intel Firmware Hub option in 
       the Other Devices section.
   5.  When the Intel Firmware Hub Properties page appears, 
       select the Driver Tab.
   6.  Select the Update Driver Button.
   7.  Select the Search for Driver Option.
       
       If the ISD_95.INF file and driver are located on a floppy disk, 
       Windows should automatically find the driver and prompt 
       you to finish the installation.
		
       If the ISD_95.INF file and driver are located elsewhere,
       Windows will report that it is unable to find the driver.  
       If this occurs select the Other Locations... Button and 
       navigate to the location of the ISD_95.INF file and driver.

   8.  After Windows has copied the driver you will be prompted 
       to restart the machine.  Select Yes at this prompt.

   9.  After Windows is restarted you should now find the Firmware 
       Hub listed in the System Devices section of the Device Manager. 
   
   The Intel Security Driver is now ready for use!

   Microsoft Windows 98
   --------------------

   1.  Click Start|Settings|Control Panel.
   2.  Double-click the System Icon.
   3.  Select the Device Manager Tab on the System Properties 
       dialog box.
   4.  Double-click the Intel Firmware Hub option in 
       the Other Devices section.
   5.  Select the Reinstall Driver Button.
   6.  When Update Device Driver Wizard appears select the Next Button.
   7.  Select the "Search for a better driver ..." option
       then click Next.
   8.  Select the Location of the ISD_WDM.INF File and Driver
       then click Next.
   9.  After a few seconds Windows should find the Driver.  
       When it does, click Next to finish loading the driver.
   10. After the file copy is complete you should see a message 
       reporting that Windows is finished installing an updated driver.
   11. Click Finish.
   12. You should now find the Firmware Hub listed in the System 
       Devices section of the Device Manager. 

       The Intel Security Driver is now ready for use!
   		
  
(Simple Installation Procedure -- cont.)

4. Run the Self Test application, described in 
   "Part 3 - Self Test Application".

*** Files Installed by the Simple Installation Procedure ***

The simple installation procedure installs the files listed below, 
where, in the following: 
 <drive> is the drive specified during installation 
    (C, by default)
 <path>  is the path specified during installation 
    (\Program Files\Intel\Intel Security Driver, by default)

<drive>:<path>
	\Inf_isd
		\Win95
			ISD_95.INF
			ISECDRV.VXD
		\WinNT4
			ISD_NT.REG
			ISECDRV.SYS
		\WDM
			ISD_WDM.INF
			ISECDRV.SYS
			ISD_CAT.CAT


************************************************************
* Part 3 - Self Test Application
************************************************************

Note:  Self Test is only installed as part of the Full Installation 
Procedure.

The purpose of the Self Test Application is to provide a tool for 
verifying driver operation.  

When using the Self Test Application you may experience some 
degradation in system performance when running in Continuous mode.  
(For instance, the mouse may perform sluggishly.)  This is due 
to FIPS 140-1 tests being performed for every one thousand
random numbers generated.  (FIPS 140-1 tests are resource intensive.)
If you would like to change this setting:

1.  In the Windows Explorer, double-click the following file:
    <drive>:<path>\Sample Applications\SelfTest\selftest.ini

    where:
      <drive> is the drive specified during installation (C, by default)    
      <path> is the path specified during installation
             (\Program Files\Intel\Intel Security Driver, by default)

2.  Modify the variable "RNG_Calls_Between_Test"

To run the Self Test Application:

1.  In the Windows Explorer, double-click the following file:
    <drive>:<path>\Sample Applications\SelfTest\selftest.exe

    where:
      <drive> is the drive specified during installation (C, by default)    
      <path> is the path specified during installation
             (\Program Files\Intel\Intel Security Driver, by default)

2. Click the Help button to view online Help about the 
   Self Test Application.

Tips on using online Help:  

* Click the "Help Topics" button to access Contents, Index, 
  or full text search. 
* On the Contents page, double-click the book icon to expand it, 
  then double-click a topic ("?" symbol) to jump directly to a topic.
* Click the left ( << ) or right ( >> ) browse buttons to browse 
  backward or forward through the Help file.
* Click other links on the page to access other topics 
  (identified by underscored text or by buttons on the page).

************************************************************
* Part 4 - Updated Information
************************************************************

*** Overview ***

This section includes new features from the previous release 
and/or updated information about the product that was added 
after the primary documentation was completed.

*** New Features in This Release ***

New features added since the Beta release include:

* Self Test application -- The ability to specify the ratio of 
  FIPS 140-1 tests being performed for a specified number of 
  random numbers generated.
  (For more information, see Part 3.)

*** Updated Product Information ***

Supported Hardware
------------------

This release of the Intel(R) Security Driver operates on the 
Intel(R) 810 and Intel(R) 820 chipsets.  

Supported Operating Systems
---------------------------
This release of the Intel(R) Security Driver operates on the 
following operating systems:

* Microsoft Windows* 95 (Retail, OSR-1, OSR-2, 0SR-2.1, OSR-2.5)
* Microsoft Windows 98 (Retail)
* Microsoft Windows NT* 4.0 (Retail, SP1, SP2, SP3, SP4)

Note: At the time of this release, Windows 2000 was still under
development.  As a result, this release does not support
Windows 2000. thus, if you attempt to perform an installation (via
the setup program described in Part 2 -- Installation) you will
get a message explaining whom to contact for the latest
information.

************************************************************
* Part 5 - Troubleshooting
************************************************************

This section provides troubleshooting information.

How to determine if the Intel Security Driver is loaded
-------------------------------------------------------

Microsoft Windows NT 4.0
  To determine if the driver is loaded and working properly,
  click Start|Settings|Control Panel, then double-click 
  the Devices icon.
  
  In the list of Devices, locate the ISECDRV device. Verify 
  that its Status is "Started" that the Startup mode is set to  
  "Automatic".

Microsoft Windows 95
  Once installation is complete and Windows has restarted you 
  should find the Intel Firmware Hub Device listed in the System 
  Devices section of the Device Manager. 
     
  Double click on the Intel Firmware Hub and verify that the text 
  "This device is working properly." appears in the General Tab. 
  
  Click on the Driver tab and verify that the Driver Date has been set.

Microsoft Windows 98
  Once installation is complete, you should find the Intel Firmware Hub 
  Device listed in the System Devices section of the Device Manager. 
     
  Double click on the Intel Firmware Hub Device and verify that the text 
  "This device is working properly." appears in the General Tab.
  
  Click on the Driver tab and verify that the Provider is set to 
  Intel and a Date has been set.

How to verify that the hardware RNG has been installed
------------------------------------------------------
Windows NT 4.0
  Does not have the ability to detect hardware devices.

Microsoft Windows 95, Windows 98
  Look for the firmware hub device under "system Devices" in the Device 
  Manager.  If it is listed and does not indicate a driver problem
  (indicated by a yellow flag), then contact customer support. (To locate
  the Device Manager, click Start|Settings|Control Panel, double-click
  the System icon, then click the Device Manager tab.)


************************************************************
************************************************************
Intel is making no claims of usability, efficacy or warranty.  
The INTEL SOFTWARE LICENSE AGREEMENT
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in connection with 
Intel products. No license, express or implied, by estoppel 
or otherwise, to any intellectual property rights is granted 
by this document.  Intel assumes no liability whatsoever, 
and Intel disclaims any express or implied warranty, 
relating to sale and/or use of Intel products including 
liability or warranties relating to fitness for a particular 
purpose, merchantability, or infringement of any patent, 
copyright or other intellectual property right. Intel 
products are not intended for use in medical, life saving, 
or life sustaining applications.

************************************************************
Intel Corporation disclaims all warranties and liabilities 
for the use of this document and the information contained 
herein, and assumes no responsibility for any errors which 
may appear in this document; nor does Intel make a 
commitment to update the information contained herein. Intel 
reserves the right to make changes to this document at any 
time, without notice.
************************************************************
************************************************************

* Third-party brands and names are the property of their 
respective owners.

Copyright (c) 1999, Intel Corporation.  All rights reserved.

