SSD Guru V1.0

This is the first release of OCZ's new SSD management utility, SSD Guru

Known issues in SSD Guru:
- If SSDs are plugged/unplugged or volumes mounted/unmounted while SSD Guru is running, this may not be automatically detected in some Linux distributions
- Some third party USB devices, such as Dymo LabelManager, may interfere with SSD detection in SSD Guru
- After performing a BIOS update on a RevoDrive 350, and before restarting SMART data may be unavailable resulting in incorrect information on the SSD Guru Dashboard. This will be corrected once the system has restarted
- Boot media created by SSD Guru to update some system drives supports legacy boot only, and not UEFI boot

Known issues in Bootable SSD Guru:
- When using UEFI boot, on some systems the display resolution may be too low to fully view SSD Guru. Use legacy boot to resolve this
- After SSD Guru runs, there may be a short delay before SSD Guru can check for updates. During this period it will say "Up to date"
- Bootable Toolbox operation can be unreliable on some hosts if the keyboard, mouse and monitor are connected via a KVM
- Bootable Toolbox does not support all Intel wireless adapters or Atheros wired network adapters
- Some older Apple Macintosh cannot boot from USB for Bootable Toolbox
- Bootable Toolbox may fail to update firmware on some Apple Macintosh if booting from CD, although booting from USB works correctly
