Overview:

The ApcProxy.nlm and the Prxy2pcp.nlm are Netware modules that allow APC's WebAgent to access 
APC's PowerChute Plus 4.3 for Netware servers. With these two modules loaded, WebAgent will 
be able to discover PowerChute servers, connect to the servers, and monitor UPS statistics.

Dependencies:

Prxy2pcp.nlm requires PowerChute 4.3 for Netware to be loaded.
ApcProxy.nlm requires that Prxy2pcp be loaded.  (ApcProxy will autoload Prxy2pcp if it isn't 
loaded)

Environment:
TCPIP nlm must be running on your Netware server.

SYS:\ETC\HOSTS must have an entry with the IP address and server name of the Netware server
EX:
159.xxx.xx.xx	SERVERNAME

There must be a DNS table with the IP address and server name of the Netware server.
(For WebAgent to resolve the server name)

APC's WebAgent must be running on a Windows NT 4.0 machine on the same Network segment as 
the server/server's being monitored.
(WebAgent must be on the same segment for auto discovery, WebAgent can monitor across segments,
but the server name or IP address must be entered.)

Installation:
Install PowerChute Plus 4.3 for Netware on the Netware server.
Copy the Prxy2pcp.nlm, ApcProxy.nlm and ApcProxy.ini to the SYS:\PWRCHUTE directory on the 
Netware server.
Load PowerChute.
Load ApcProxy.

You are now ready to monitor your PowerChute for Netware servers using WebAgent and your
Web Browser.

