This is Info file g77.info, produced by Makeinfo version 1.68 from the
input file g77.tex.

   This file explains how to use the GNU Fortran system.

   Published by the Free Software Foundation 59 Temple Place - Suite 330
Boston, MA 02111-1307 USA

   Copyright (C) 1995-1997 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License," "Funding for
Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are
included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License," "Funding for Free Software," and "Protect Your Freedom--Fight
`Look And Feel'", and this permission notice, may be included in
translations approved by the Free Software Foundation instead of in the
original English.

   Contributed by James Craig Burley (<burley@gnu.org>).  Inspired by a
first pass at translating `g77-0.5.16/f/DOC' that was contributed to
Craig by David Ronis (<ronis@onsager.chem.mcgill.ca>).

INFO-DIR-SECTION Fortran Programming
START-INFO-DIR-ENTRY
* g77: (g77).               The GNU Fortran compilation system.
END-INFO-DIR-ENTRY


File: g77.info,  Node: Top,  Next: Copying,  Up: (DIR)

Introduction
************

   This manual documents how to run, install and port the GNU Fortran
compiler, as well as its new features and incompatibilities, and how to
report bugs.  It corresponds to GNU Fortran version 0.5.21.

* Menu:

* Copying::         GNU General Public License says
                    how you can copy and share GNU Fortran.
* Contributors::    People who have contributed to GNU Fortran.
* Funding::         How to help assure continued work for free software.
* Funding GNU Fortran::  How to help assure continued work on GNU Fortran.
* Look and Feel::   Protect your freedom--fight "look and feel".

* Getting Started:: Finding your way around this manual.
* What is GNU Fortran?::  How `g77' fits into the universe.
* G77 and GCC::     You can compile Fortran, C, or other programs.
* Invoking G77::    Command options supported by `g77'.
* News::            News about recent releases of `g77'.
* Changes::         User-visible changes to recent releases of `g77'.
* Language::        The GNU Fortran language.
* Compiler::        The GNU Fortran compiler.
* Other Dialects::  Dialects of Fortran supported by `g77'.
* Other Compilers:: Fortran compilers other than `g77'.
* Other Languages:: Languages other than Fortran.
* Installation::    How to configure, compile and install GNU Fortran.
* Debugging and Interfacing::  How `g77' generates code.
* Collected Fortran Wisdom::  How to avoid Trouble.
* Trouble::         If you have trouble with GNU Fortran.
* Open Questions::  Things we'd like to know.
* Bugs::            How, why, and where to report bugs.
* Service::         How to find suppliers of support for GNU Fortran.

* Adding Options::  Guidance on teaching `g77' about new options.
* Projects::        Projects for `g77' internals hackers.

* M: Diagnostics.   Diagnostics produced by `g77'.

* Index::           Index of concepts and symbol names.


File: g77.info,  Node: Copying,  Next: Contributors,  Prev: Top,  Up: Top

GNU GENERAL PUBLIC LICENSE
**************************

                         Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

Preamble
========

   The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.

   To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

   We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

   Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

   Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

   The precise terms and conditions for copying, distribution and
modification follow.

    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

  0. This License applies to any program or other work which contains a
     notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program",
     below, refers to any such program or work, and a "work based on
     the Program" means either the Program or any derivative work under
     copyright law: that is to say, a work containing the Program or a
     portion of it, either verbatim or with modifications and/or
     translated into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)  Each
     licensee is addressed as "you".

     Activities other than copying, distribution and modification are
     not covered by this License; they are outside its scope.  The act
     of running the Program is not restricted, and the output from the
     Program is covered only if its contents constitute a work based on
     the Program (independent of having been made by running the
     Program).  Whether that is true depends on what the Program does.

  1. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any
     warranty; and give any other recipients of the Program a copy of
     this License along with the Program.

     You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange
     for a fee.

  2. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

       a. You must cause the modified files to carry prominent notices
          stating that you changed the files and the date of any change.

       b. You must cause any work that you distribute or publish, that
          in whole or in part contains or is derived from the Program
          or any part thereof, to be licensed as a whole at no charge
          to all third parties under the terms of this License.

       c. If the modified program normally reads commands interactively
          when run, you must cause it, when started running for such
          interactive use in the most ordinary way, to print or display
          an announcement including an appropriate copyright notice and
          a notice that there is no warranty (or else, saying that you
          provide a warranty) and that users may redistribute the
          program under these conditions, and telling the user how to
          view a copy of this License.  (Exception: if the Program
          itself is interactive but does not normally print such an
          announcement, your work based on the Program is not required
          to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the
     Program, and can be reasonably considered independent and separate
     works in themselves, then this License, and its terms, do not
     apply to those sections when you distribute them as separate
     works.  But when you distribute the same sections as part of a
     whole which is a work based on the Program, the distribution of
     the whole must be on the terms of this License, whose permissions
     for other licensees extend to the entire whole, and thus to each
     and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or
     contest your rights to work written entirely by you; rather, the
     intent is to exercise the right to control the distribution of
     derivative or collective works based on the Program.

     In addition, mere aggregation of another work not based on the
     Program with the Program (or with a work based on the Program) on
     a volume of a storage or distribution medium does not bring the
     other work under the scope of this License.

  3. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms
     of Sections 1 and 2 above provided that you also do one of the
     following:

       a. Accompany it with the complete corresponding machine-readable
          source code, which must be distributed under the terms of
          Sections 1 and 2 above on a medium customarily used for
          software interchange; or,

       b. Accompany it with a written offer, valid for at least three
          years, to give any third party, for a charge no more than your
          cost of physically performing source distribution, a complete
          machine-readable copy of the corresponding source code, to be
          distributed under the terms of Sections 1 and 2 above on a
          medium customarily used for software interchange; or,

       c. Accompany it with the information you received as to the offer
          to distribute corresponding source code.  (This alternative is
          allowed only for noncommercial distribution and only if you
          received the program in object code or executable form with
          such an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete
     source code means all the source code for all modules it contains,
     plus any associated interface definition files, plus the scripts
     used to control compilation and installation of the executable.
     However, as a special exception, the source code distributed need
     not include anything that is normally distributed (in either
     source or binary form) with the major components (compiler,
     kernel, and so on) of the operating system on which the executable
     runs, unless that component itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

  4. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

  5. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify
     or distribute the Program or its derivative works.  These actions
     are prohibited by law if you do not accept this License.
     Therefore, by modifying or distributing the Program (or any work
     based on the Program), you indicate your acceptance of this
     License to do so, and all its terms and conditions for copying,
     distributing or modifying the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program
     subject to these terms and conditions.  You may not impose any
     further restrictions on the recipients' exercise of the rights
     granted herein.  You are not responsible for enforcing compliance
     by third parties to this License.

  7. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent
     issues), conditions are imposed on you (whether by court order,
     agreement or otherwise) that contradict the conditions of this
     License, they do not excuse you from the conditions of this
     License.  If you cannot distribute so as to satisfy simultaneously
     your obligations under this License and any other pertinent
     obligations, then as a consequence you may not distribute the
     Program at all.  For example, if a patent license would not permit
     royalty-free redistribution of the Program by all those who
     receive copies directly or indirectly through you, then the only
     way you could satisfy both it and this License would be to refrain
     entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable
     under any particular circumstance, the balance of the section is
     intended to apply and the section as a whole is intended to apply
     in other circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of
     any such claims; this section has the sole purpose of protecting
     the integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is
     willing to distribute software through any other system and a
     licensee cannot impose that choice.

     This section is intended to make thoroughly clear what is believed
     to be a consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces,
     the original copyright holder who places the Program under this
     License may add an explicit geographical distribution limitation
     excluding those countries, so that distribution is permitted only
     in or among countries not thus excluded.  In such case, this
     License incorporates the limitation as if written in the body of
     this License.

  9. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies a version number of this License which applies
     to it and "any later version", you have the option of following
     the terms and conditions either of that version or of any later
     version published by the Free Software Foundation.  If the Program
     does not specify a version number of this License, you may choose
     any version ever published by the Free Software Foundation.

 10. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted
     by the Free Software Foundation, write to the Free Software
     Foundation; we sometimes make exceptions for this.  Our decision
     will be guided by the two goals of preserving the free status of
     all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                NO WARRANTY

 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
     HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
     QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
     SERVICING, REPAIR OR CORRECTION.

 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
     MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
     INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
     OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
     OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

                      END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs
=============================================

   If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
     Copyright (C) 19YY  NAME OF AUTHOR
     
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
     
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
     
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

   Also add information on how to contact you by electronic and paper
mail.

   If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

     Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
     type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

   The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License.  Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.

   You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary.  Here is a sample; alter the names:

     Yoyodyne, Inc., hereby disclaims all copyright interest in the program
     `Gnomovision' (which makes passes at compilers) written by James Hacker.
     
     SIGNATURE OF TY COON, 1 April 1989
     Ty Coon, President of Vice

   This General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Library General Public License instead of this License.


File: g77.info,  Node: Contributors,  Next: Funding,  Prev: Copying,  Up: Top

Contributors to GNU Fortran
***************************

   In addition to James Craig Burley, who wrote the front end, many
people have helped create and improve GNU Fortran.

   * The packaging and compiler portions of GNU Fortran are based
     largely on the GNU CC compiler.  *Note Contributors to GNU CC:
     (gcc)Contributors, for more information.

   * The run-time library used by GNU Fortran is a repackaged version
     of the `libf2c' library (combined from the `libF77' and `libI77'
     libraries) provided as part of `f2c', available for free from
     `netlib' sites on the Internet.

   * Cygnus Support and The Free Software Foundation contributed
     significant money and/or equipment to Craig's efforts.

   * The following individuals served as alpha testers prior to `g77''s
     public release.  This work consisted of testing, researching,
     sometimes debugging, and occasionally providing small amounts of
     code and fixes for `g77', plus offering plenty of helpful advice
     to Craig:

          Jonathan Corbet

          Dr. Mark Fernyhough

          Takafumi Hayashi (The University of
          AIzu)--<takafumi@u-aizu.ac.jp>

          Kate Hedstrom

          Michel Kern (INRIA and Rice
          University)--<Michel.Kern@inria.fr>

          Dr. A. O. V. Le Blanc

          Dave Love

          Rick Lutowski

          Toon Moene

          Rick Niles

          Derk Reefman

          Wayne K. Schroll

          Bill Thorson

          Pedro A. M. Vazquez

          Ian Watson

   * Scott Snyder (<snyder@d0sgif.fnal.gov>) provided the patch to add
     rudimentary support for `INTEGER*1', `INTEGER*2', and `LOGICAL*1'.
     This inspired Craig to add further support, even though the
     resulting support would still be incomplete, because version 0.6
     is still a ways off.

   * David Ronis (<ronis@onsager.chem.mcgill.ca>) inspired and
     encouraged Craig to rewrite the documentation in texinfo format by
     contributing a first pass at a translation of the old
     `g77-0.5.16/f/DOC' file.

   * Toon Moene (<toon@moene.indiv.nluug.nl>) performed some analysis
     of generated code as part of an overall project to improve `g77'
     code generation to at least be as good as `f2c' used in
     conjunction with `gcc'.  So far, this has resulted in the three,
     somewhat experimental, options added by `g77' to the `gcc'
     compiler and its back end.

   * John Carr (<jfc@mit.edu>) wrote the alias analysis improvements.

   * Thanks to Mary Cortani and the staff at Craftwork Solutions
     (<support@craftwork.com>) for all of their support.

   * Many other individuals have helped debug, test, and improve `g77'
     over the past several years, and undoubtedly more people will be
     doing so in the future.  If you have done so, and would like to
     see your name listed in the above list, please ask!  The default
     is that people wish to remain anonymous.


File: g77.info,  Node: Funding,  Next: Funding GNU Fortran,  Prev: Contributors,  Up: Top

Funding Free Software
*********************

   If you want to have more free software a few years from now, it makes
sense for you to help encourage people to contribute funds for its
development.  The most effective approach known is to encourage
commercial redistributors to donate.

   Users of free software systems can boost the pace of development by
encouraging for-a-fee distributors to donate part of their selling price
to free software developers--the Free Software Foundation, and others.

   The way to convince distributors to do this is to demand it and
expect it from them.  So when you compare distributors, judge them
partly by how much they give to free software development.  Show
distributors they must compete to be the one who gives the most.

   To make this approach work, you must insist on numbers that you can
compare, such as, "We will donate ten dollars to the Frobnitz project
for each disk sold."  Don't be satisfied with a vague promise, such as
"A portion of the profits are donated," since it doesn't give a basis
for comparison.

   Even a precise fraction "of the profits from this disk" is not very
meaningful, since creative accounting and unrelated business decisions
can greatly alter what fraction of the sales price counts as profit.
If the price you pay is $50, ten percent of the profit is probably less
than a dollar; it might be a few cents, or nothing at all.

   Some redistributors do development work themselves.  This is useful
too; but to keep everyone honest, you need to inquire how much they do,
and what kind.  Some kinds of development make much more long-term
difference than others.  For example, maintaining a separate version of
a program contributes very little; maintaining the standard version of a
program for the whole community contributes much.  Easy new ports
contribute little, since someone else would surely do them; difficult
ports such as adding a new CPU to the GNU C compiler contribute more;
major new features or packages contribute the most.

   By establishing the idea that supporting further development is "the
proper thing to do" when distributing free software for a fee, we can
assure a steady flow of resources into making more free software.

     Copyright (C) 1994 Free Software Foundation, Inc.
     Verbatim copying and redistribution of this section is permitted
     without royalty; alteration is not permitted.


File: g77.info,  Node: Funding GNU Fortran,  Next: Look and Feel,  Prev: Funding,  Up: Top

Funding GNU Fortran
*******************

   Work on GNU Fortran is still being done mostly by its author, James
Craig Burley (<burley@gnu.org>), who is a volunteer for, not an
employee of, the Free Software Foundation (FSF).  As with other GNU
software, funding is important because it can pay for needed equipment,
personnel, and so on.

   The FSF provides information on the best way to fund ongoing
development of GNU software (such as GNU Fortran) in documents such as
the "GNUS Bulletin".  Email <gnu@prep.ai.mit.edu> for information on
funding the FSF.

   To fund specific GNU Fortran work in particular, the FSF might
provide a means for that, but the FSF does not provide direct funding
to the author of GNU Fortran to continue his work.  The FSF has
employee salary restrictions that can be incompatible with the
financial needs of some volunteers, who therefore choose to remain
volunteers and thus be able to be free to do contract work and
otherwise make their own schedules for doing GNU work.

   Still, funding the FSF at least indirectly benefits work on specific
projects like GNU Fortran because it ensures the continuing operation
of the FSF offices, their workstations, their network connections, and
so on, which are invaluable to volunteers.  (Similarly, hiring Cygnus
Support can help a project like GNU Fortran--Cygnus has been a
long-time donor of equipment usage to the author of GNU Fortran, and
this too has been invaluable--*Note Contributors::.)

   Currently, the only way to directly fund the author of GNU Fortran
in his work on that project is to hire him for the work you want him to
do, or donate money to him.  Several people have done this already,
with the result that he has not needed to immediately find contract
work on a few occasions.  If more people did this, he would be able to
plan on not doing contract work for many months and could thus devote
that time to work on projects (such as the planned changes for 0.6)
that require longer timeframes to complete.  For the latest information
on the status of the author, do `finger -l burley@gnu.org' on a UNIX
system (or any system with a command like UNIX `finger').

   Another important way to support work on GNU Fortran is to volunteer
to help out.  Work is needed on documentation, testing, porting to
various machines, and in some cases, coding (although major changes
planned for version 0.6 make it difficult to add manpower to this area).
Email <fortran@gnu.org> to volunteer for this work.

   *Note Funding Free Software: Funding, for more information.


File: g77.info,  Node: Look and Feel,  Next: Getting Started,  Prev: Funding GNU Fortran,  Up: Top

Protect Your Freedom--Fight "Look And Feel"
*******************************************

   To preserve the ability to write free software, including
replacements for proprietary software, authors must be free to
replicate the user interface to which users of existing software have
become accustomed.

   *Note Protect Your Freedom--Fight "Look And Feel": (gcc)Look and
Feel, for more information.


File: g77.info,  Node: Getting Started,  Next: What is GNU Fortran?,  Prev: Look and Feel,  Up: Top

Getting Started
***************

   If you don't need help getting started reading the portions of this
manual that are most important to you, you should skip this portion of
the manual.

   If you are new to compilers, especially Fortran compilers, or new to
how compilers are structured under UNIX and UNIX-like systems, you'll
want to see *Note What is GNU Fortran?::.

   If you are new to GNU compilers, or have used only one GNU compiler
in the past and not had to delve into how it lets you manage various
versions and configurations of `gcc', you should see *Note G77 and
GCC::.

   Everyone except experienced `g77' users should see *Note Invoking
G77::.

   If you're acquainted with previous versions of `g77', you should see
*Note News::.  Further, if you've actually used previous versions of
`g77', especially if you've written or modified Fortran code to be
compiled by previous versions of `g77', you should see *Note Changes::.

   If you intend to write or otherwise compile code that is not already
strictly conforming ANSI FORTRAN 77--and this is probably everyone--you
should see *Note Language::.

   If you don't already have `g77' installed on your system, you must
see *Note Installation::.

   If you run into trouble getting Fortran code to compile, link, run,
or work properly, you might find answers if you see *Note Debugging and
Interfacing::, see *Note Collected Fortran Wisdom::, and see *Note
Trouble::.  You might also find that the problems you are encountering
are bugs in `g77'--see *Note Bugs::, for information on reporting them,
after reading the other material.

   If you need further help with `g77', or with freely redistributable
software in general, see *Note Service::.

   If you would like to help the `g77' project, see *Note Funding GNU
Fortran::, for information on helping financially, and see *Note
Projects::, for information on helping in other ways.

   If you're generally curious about the future of `g77', see *Note
Projects::.  If you're curious about its past, see *Note Contributors::,
and see *Note Funding GNU Fortran::.

   To see a few of the questions maintainers of `g77' have, and that
you might be able to answer, see *Note Open Questions::.


File: g77.info,  Node: What is GNU Fortran?,  Next: G77 and GCC,  Prev: Getting Started,  Up: Top

What is GNU Fortran?
********************

   GNU Fortran, or `g77', is designed initially as a free replacement
for, or alternative to, the UNIX `f77' command.  (Similarly, `gcc' is
designed as a replacement for the UNIX `cc' command.)

   `g77' also is designed to fit in well with the other fine GNU
compilers and tools.

   Sometimes these design goals conflict--in such cases, resolution
often is made in favor of fitting in well with Project GNU.  These
cases are usually identified in the appropriate sections of this manual.

   As compilers, `g77', `gcc', and `f77' share the following
characteristics:

   * They read a user's program, stored in a file and containing
     instructions written in the appropriate language (Fortran, C, and
     so on).  This file contains "source code".

   * They translate the user's program into instructions a computer can
     carry out more quickly than it takes to translate the instructions
     in the first place.  These instructions are called "machine
     code"--code designed to be efficiently translated and processed by
     a machine such as a computer.  Humans usually aren't as good
     writing machine code as they are at writing Fortran or C, because
     it is easy to make tiny mistakes writing machine code.  When
     writing Fortran or C, it is easy to make big mistakes.

   * They provide information in the generated machine code that can
     make it easier to find bugs in the program (using a debugging
     tool, called a "debugger", such as `gdb').

   * They locate and gather machine code already generated to perform
     actions requested by statements in the user's program.  This
     machine code is organized into "libraries" and is located and
     gathered during the "link" phase of the compilation process.
     (Linking often is thought of as a separate step, because it can be
     directly invoked via the `ld' command.  However, the `g77' and
     `gcc' commands, as with most compiler commands, automatically
     perform the linking step by calling on `ld' directly, unless asked
     to not do so by the user.)

   * They attempt to diagnose cases where the user's program contains
     incorrect usages of the language.  The "diagnostics" produced by
     the compiler indicate the problem and the location in the user's
     source file where the problem was first noticed.  The user can use
     this information to locate and fix the problem.  (Sometimes an
     incorrect usage of the language leads to a situation where the
     compiler can no longer make any sense of what follows--while a
     human might be able to--and thus ends up complaining about many
     "problems" it encounters that, in fact, stem from just one
     problem, usually the first one reported.)

   * They attempt to diagnose cases where the user's program contains a
     correct usage of the language, but instructs the computer to do
     something questionable.  These diagnostics often are in the form
     of "warnings", instead of the "errors" that indicate incorrect
     usage of the language.

   How these actions are performed is generally under the control of
the user.  Using command-line options, the user can specify how
persnickety the compiler is to be regarding the program (whether to
diagnose questionable usage of the language), how much time to spend
making the generated machine code run faster, and so on.

   `g77' consists of several components:

   * A modified version of the `gcc' command, which also might be
     installed as the system's `cc' command.  (In many cases, `cc'
     refers to the system's "native" C compiler, which might be a
     non-GNU compiler, or an older version of `gcc' considered more
     stable or that is used to build the operating system kernel.)

   * The `g77' command itself, which also might be installed as the
     system's `f77' command.

   * The `libf2c' run-time library.  This library contains the machine
     code needed to support capabilities of the Fortran language that
     are not directly provided by the machine code generated by the
     `g77' compilation phase.

   * The compiler itself, internally named `f771'.

     Note that `f771' does not generate machine code directly--it
     generates "assembly code" that is a more readable form of machine
     code, leaving the conversion to actual machine code to an
     "assembler", usually named `as'.

   `gcc' is often thought of as "the C compiler" only, but it does more
than that.  Based on command-line options and the names given for files
on the command line, `gcc' determines which actions to perform,
including preprocessing, compiling (in a variety of possible
languages), assembling, and linking.

   For example, the command `gcc foo.c' "drives" the file `foo.c'
through the preprocessor `cpp', then the C compiler (internally named
`cc1'), then the assembler (usually `as'), then the linker (`ld'),
producing an executable program named `a.out' (on UNIX systems).

   As another example, the command `gcc foo.cc' would do much the same
as `gcc foo.c', but instead of using the C compiler named `cc1', `gcc'
would use the C++ compiler (named `cc1plus').

   In a GNU Fortran installation, `gcc' recognizes Fortran source files
by name just like it does C and C++ source files.  It knows to use the
Fortran compiler named `f771', instead of `cc1' or `cc1plus', to
compile Fortran files.

   Non-Fortran-related operation of `gcc' is generally unaffected by
installing the GNU Fortran version of `gcc'.  However, without the
installed version of `gcc' being the GNU Fortran version, `gcc' will
not be able to compile and link Fortran programs--and since `g77' uses
`gcc' to do most of the actual work, neither will `g77'!

   The `g77' command is essentially just a front-end for the `gcc'
command.  Fortran users will normally use `g77' instead of `gcc',
because `g77' knows how to specify the libraries needed to link with
Fortran programs (`libf2c' and `lm').  `g77' can still compile and link
programs and source files written in other languages, just like `gcc'.

   The command `g77 -v' is a quick way to display lots of version
information for the various programs used to compile a typical
preprocessed Fortran source file--this produces much more output than
`gcc -v' currently does.  (If it produces an error message near the end
of the output--diagnostics from the linker, usually `ld'--you might
have an out-of-date `libf2c' that improperly handles complex
arithmetic.)  In the output of this command, the line beginning `GNU
Fortran Front End' identifies the version number of GNU Fortran;
immediately preceding that line is a line identifying the version of
`gcc' with which that version of `g77' was built.

   The `libf2c' library is distributed with GNU Fortran for the
convenience of its users, but is not part of GNU Fortran.  It contains
the procedures needed by Fortran programs while they are running.

   For example, while code generated by `g77' is likely to do
additions, subtractions, and multiplications "in line"--in the actual
compiled code--it is not likely to do trigonometric functions this way.

   Instead, operations like trigonometric functions are compiled by the
`f771' compiler (invoked by `g77' when compiling Fortran code) into
machine code that, when run, calls on functions in `libf2c', so
`libf2c' must be linked with almost every useful program having any
component compiled by GNU Fortran.  (As mentioned above, the `g77'
command takes care of all this for you.)

   The `f771' program represents most of what is unique to GNU Fortran.
While much of the `libf2c' component is really part of `f2c', a free
Fortran-to-C converter distributed by Bellcore (AT&T), plus `libU77',
provided by Dave Love, and the `g77' command is just a small front-end
to `gcc', `f771' is a combination of two rather large chunks of code.

   One chunk is the so-called "GNU Back End", or GBE, which knows how
to generate fast code for a wide variety of processors.  The same GBE
is used by the C, C++, and Fortran compiler programs `cc1', `cc1plus',
and `f771', plus others.  Often the GBE is referred to as the "gcc back
end" or even just "gcc"--in this manual, the term GBE is used whenever
the distinction is important.

   The other chunk of `f771' is the majority of what is unique about
GNU Fortran--the code that knows how to interpret Fortran programs to
determine what they are intending to do, and then communicate that
knowledge to the GBE for actual compilation of those programs.  This
chunk is called the "Fortran Front End" (FFE).  The `cc1' and `cc1plus'
programs have their own front ends, for the C and C++ languages,
respectively.  These fronts ends are responsible for diagnosing
incorrect usage of their respective languages by the programs the
process, and are responsible for most of the warnings about
questionable constructs as well.  (The GBE handles producing some
warnings, like those concerning possible references to undefined
variables.)

   Because so much is shared among the compilers for various languages,
much of the behavior and many of the user-selectable options for these
compilers are similar.  For example, diagnostics (error messages and
warnings) are similar in appearance; command-line options like `-Wall'
have generally similar effects; and the quality of generated code (in
terms of speed and size) is roughly similar (since that work is done by
the shared GBE).


File: g77.info,  Node: G77 and GCC,  Next: Invoking G77,  Prev: What is GNU Fortran?,  Up: Top

Compile Fortran, C, or Other Programs
*************************************

   A GNU Fortran installation includes a modified version of the `gcc'
command.

   In a non-Fortran installation, `gcc' recognizes C, C++, and
Objective-C source files.

   In a GNU Fortran installation, `gcc' also recognizes Fortran source
files and accepts Fortran-specific command-line options, plus some
command-line options that are designed to cater to Fortran users but
apply to other languages as well.

   *Note Compile C; C++; or Objective-C: (gcc)G++ and GCC, for
information on the way different languages are handled by the GNU CC
compiler (`gcc').

   Also provided as part of GNU Fortran is the `g77' command.  The
`g77' command is designed to make compiling and linking Fortran
programs somewhat easier than when using the `gcc' command for these
tasks.  It does this by analyzing the command line somewhat and
changing it appropriately before submitting it to the `gcc' command.

   Use the `-v' option with `g77' to see what is going on--the first
line of output is the invocation of the `gcc' command.  Use
`--driver=true' to disable actual invocation of `gcc' (this works
because `true' is the name of a UNIX command that simply returns
success status).


File: g77.info,  Node: Invoking G77,  Next: News,  Prev: G77 and GCC,  Up: Top

GNU Fortran Command Options
***************************

   The `g77' command supports all the options supported by the `gcc'
command.  *Note GNU CC Command Options: (gcc)Invoking GCC, for
information on the non-Fortran-specific aspects of the `gcc' command
(and, therefore, the `g77' command).

   The `g77' command supports one option not supported by the `gcc'
command:

`--driver=COMMAND'
     Specifies that COMMAND, rather than `gcc', is to be invoked by
     `g77' to do its job.  For example, within the `gcc' build
     directory after building GNU Fortran (but without having to
     install it), `./g77 --driver=./xgcc foo.f -B./'.

   All other options are supported both by `g77' and by `gcc' as
modified (and reinstalled) by the `g77' distribution.  In some cases,
options have positive and negative forms; the negative form of `-ffoo'
would be `-fno-foo'.  This manual documents only one of these two
forms, whichever one is not the default.

* Menu:

* Option Summary::      Brief list of all `g77' options,
                        without explanations.
* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* Shorthand Options::   Options that are shorthand for other options.
* Fortran Dialect Options::  Controlling the variant of Fortran language
                             compiled.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Code Gen Options::    Specifying conventions for function calls, data layout
                        and register usage.
* Environment Variables:: Env vars that affect GNU Fortran.


File: g77.info,  Node: Option Summary,  Next: Overall Options,  Up: Invoking G77

Option Summary
==============

   Here is a summary of all the options specific to GNU Fortran, grouped
by type.  Explanations are in the following sections.

*Overall Options*
     *Note Options Controlling the Kind of Output: Overall Options.
          --driver  -fversion  -fset-g77-defaults  -fno-silent

*Shorthand Options*
     *Note Shorthand Options::.
          -ff66  -fno-f66  -ff77  -fno-f77  -fugly  -fno-ugly

*Fortran Language Options*
     *Note Options Controlling Fortran Dialect: Fortran Dialect Options.
          -ffree-form  -fno-fixed-form  -ff90
          -fvxt  -fdollar-ok  -fno-backslash
          -fno-ugly-args  -fno-ugly-assign  -fno-ugly-assumed
          -fugly-comma  -fugly-complex  -fugly-init  -fugly-logint
          -fonetrip  -ftypeless-boz
          -fintrin-case-initcap  -fintrin-case-upper
          -fintrin-case-lower  -fintrin-case-any
          -fmatch-case-initcap  -fmatch-case-upper
          -fmatch-case-lower  -fmatch-case-any
          -fsource-case-upper -fsource-case-lower  -fsource-case-preserve
          -fsymbol-case-initcap  -fsymbol-case-upper
          -fsymbol-case-lower  -fsymbol-case-any
          -fcase-strict-upper  -fcase-strict-lower
          -fcase-initcap  -fcase-upper  -fcase-lower  -fcase-preserve
          -ff2c-intrinsics-delete  -ff2c-intrinsics-hide
          -ff2c-intrinsics-disable  -ff2c-intrinsics-enable
          -fbadu77-intrinsics-delete  -fbadu77-intrinsics-hide
          -fbadu77-intrinsics-disable  -fbadu77-intrinsics-enable
          -ff90-intrinsics-delete  -ff90-intrinsics-hide
          -ff90-intrinsics-disable  -ff90-intrinsics-enable
          -fgnu-intrinsics-delete  -fgnu-intrinsics-hide
          -fgnu-intrinsics-disable  -fgnu-intrinsics-enable
          -fmil-intrinsics-delete  -fmil-intrinsics-hide
          -fmil-intrinsics-disable  -fmil-intrinsics-enable
          -funix-intrinsics-delete  -funix-intrinsics-hide
          -funix-intrinsics-disable  -funix-intrinsics-enable
          -fvxt-intrinsics-delete  -fvxt-intrinsics-hide
          -fvxt-intrinsics-disable  -fvxt-intrinsics-enable
          -ffixed-line-length-N  -ffixed-line-length-none

*Warning Options*
     *Note Options to Request or Suppress Warnings: Warning Options.
          -fsyntax-only  -pedantic  -pedantic-errors  -fpedantic
          -w  -Wno-globals  -Wimplicit -Wunused  -Wuninitialized
          -Wall  -Wsurprising
          -Werror  -W

*Debugging Options*
     *Note Options for Debugging Your Program or GCC: Debugging Options.
          -g

*Optimization Options*
     *Note Options that Control Optimization: Optimize Options.
          -malign-double
          -ffloat-store  -fforce-mem  -fforce-addr  -fno-inline
          -ffast-math  -fstrength-reduce  -frerun-cse-after-loop
          -fexpensive-optimizations  -fdelayed-branch
          -fschedule-insns  -fschedule-insn2  -fcaller-saves
          -funroll-loops  -funroll-all-loops
          -fno-move-all-movables  -fno-reduce-all-givs
          -fno-rerun-loop-opt

*Directory Options*
     *Note Options for Directory Search: Directory Options.
          -IDIR  -I-

*Code Generation Options*
     *Note Options for Code Generation Conventions: Code Gen Options.
          -fno-automatic  -finit-local-zero  -fno-f2c
          -ff2c-library  -fno-underscoring  -fno-ident
          -fpcc-struct-return  -freg-struct-return
          -fshort-double  -fno-common  -fpack-struct
          -fzeros  -fno-second-underscore
          -fdebug-kludge  -fno-emulate-complex
          -falias-check  -fargument-alias
          -fargument-noalias  -fno-argument-noalias-global
          -fno-globals

* Menu:

* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* Shorthand Options::   Options that are shorthand for other options.
* Fortran Dialect Options::  Controlling the variant of Fortran language
                             compiled.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Code Gen Options::    Specifying conventions for function calls, data layout
                        and register usage.


File: g77.info,  Node: Overall Options,  Next: Shorthand Options,  Prev: Option Summary,  Up: Invoking G77

Options Controlling the Kind of Output
======================================

   Compilation can involve as many as four stages: preprocessing, code
generation (often what is really meant by the term "compilation"),
assembly, and linking, always in that order.  The first three stages
apply to an individual source file, and end by producing an object
file; linking combines all the object files (those newly compiled, and
those specified as input) into an executable file.

   For any given input file, the file name suffix determines what kind
of program is contained in the file--that is, the language in which the
program is written is generally indicated by the suffix.  Suffixes
specific to GNU Fortran are listed below.  *Note gcc: (Using and
Porting GNU CC)Overall Options, for information on suffixes recognized
by GNU CC.

`FILE.f'

`FILE.for'
     Fortran source code that should not be preprocessed.

     Such source code cannot contain any preprocessor directives, such
     as `#include', `#define', `#if', and so on.

`FILE.F'

`FILE.fpp'
     Fortran source code that must be preprocessed (by the C
     preprocessor `cpp', which is part of GNU CC).

     Note that preprocessing is not extended to the contents of files
     included by the `INCLUDE' directive--the `#include' preprocessor
     directive must be used instead.

`FILE.r'
     Ratfor source code, which must be preprocessed by the `ratfor'
     command, which is available separately (as it is not yet part of
     the GNU Fortran distribution).

   UNIX users typically use the `FILE.f' and `FILE.F' nomenclature.
Users of other operating systems, especially those that cannot
distinguish upper-case letters from lower-case letters in their file
names, typically use the `FILE.for' and `FILE.fpp' nomenclature.

   Use of the preprocessor `cpp' allows use of C-like constructs such
as `#define' and `#include', but can lead to unexpected, even mistaken,
results due to Fortran's source file format.  It is recommended that
use of the C preprocessor be limited to `#include' and, in conjunction
with `#define', only `#if' and related directives, thus avoiding
in-line macro expansion entirely.  This recommendation applies
especially when using the traditional fixed source form.  With free
source form, fewer unexpected transformations are likely to happen, but
use of constructs such as Hollerith and character constants can
nevertheless present problems, especially when these are continued
across multiple source lines.  These problems result, primarily, from
differences between the way such constants are interpreted by the C
preprocessor and by a Fortran compiler.

   Another example of a problem that results from using the C
preprocessor is that a Fortran comment line that happens to contain any
characters "interesting" to the C preprocessor, such as a backslash at
the end of the line, is not recognized by the preprocessor as a comment
line, so instead of being passed through "raw", the line is edited
according to the rules for the preprocessor.  For example, the
backslash at the end of the line is removed, along with the subsequent
newline, resulting in the next line being effectively commented
out--unfortunate if that line is a non-comment line of important code!

   *Note:* The `-traditional' and `-undef' flags are supplied to `cpp'
by default, to avoid unpleasant surprises.  *Note Options Controlling
the Preprocessor: (gcc)Preprocessor Options.  This means that ANSI C
preprocessor features (such as the `#' operator) aren't available, and
only variables in the C reserved namespace (generally, names with a
leading underscore) are liable to substitution by C predefines.  Thus,
if you want to do system-specific tests, use, for example, `#ifdef
__linux__' rather than `#ifdef linux'.  Use the `-v' option to see
exactly how the preprocessor is invoked.

   The following options that affect overall processing are recognized
by the `g77' and `gcc' commands in a GNU Fortran installation:

`--driver=COMMAND'
     This works when invoking only the `g77' command, not when invoking
     the `gcc' command.  *Note GNU Fortran Command Options: Invoking
     G77, for information on this option.

`-fversion'
     Ensure that the `g77'-specific version of the compiler phase is
     reported, if run.  (This is supplied automatically when `-v' or
     `--verbose' is specified as a command-line option for `g77' or
     `gcc' and when the resulting commands compile Fortran source
     files.)

`-fset-g77-defaults'
     Set up whatever `gcc' options are to apply to Fortran
     compilations, and avoid running internal consistency checks that
     might take some time.

     As of version 0.5.20, this is equivalent to `-fmove-all-movables
     -freduce-all-givs -frerun-loop-opt -fargument-noalias-global'.

     This option is supplied automatically when compiling Fortran code
     via the `g77' or `gcc' command.  The description of this option is
     provided so that users seeing it in the output of, say, `g77 -v'
     understand why it is there.

     Also, developers who run `f771' directly might want to specify it
     by hand to get the same defaults as they would running `f771' via
     `g77' or `gcc'.  However, such developers should, after linking a
     new `f771' executable, invoke it without this option once, e.g.
     via `./f771 -quiet < /dev/null', to ensure that they have not
     introduced any internal inconsistencies (such as in the table of
     intrinsics) before proceeding--`g77' will crash with a diagnostic
     if it detects an inconsistency.

`-fno-silent'
     Print (to `stderr') the names of the program units as they are
     compiled, in a form similar to that used by popular UNIX `f77'
     implementations and `f2c'.

   *Note Options Controlling the Kind of Output: (gcc)Overall Options,
for information on more options that control the overall operation of
the `gcc' command (and, by extension, the `g77' command).


File: g77.info,  Node: Shorthand Options,  Next: Fortran Dialect Options,  Prev: Overall Options,  Up: Invoking G77

Shorthand Options
=================

   The following options serve as "shorthand" for other options
accepted by the compiler:

`-fugly'
     Specify that certain "ugly" constructs are to be quietly accepted.
     Same as:

          -fugly-args -fugly-assign -fugly-assumed
          -fugly-comma -fugly-complex -fugly-init
          -fugly-logint

     These constructs are considered inappropriate to use in new or
     well-maintained portable Fortran code, but widely used in old code.
     *Note Distensions::, for more information.

     *Note:* The `-fugly' option is likely to be removed in a future
     version.  Implicitly enabling all the `-fugly-*' options is
     unlikely to be feasible, or sensible, in the future, so users
     should learn to specify only those `-fugly-*' options they really
     need for a particular source file.

`-fno-ugly'
     Specify that all "ugly" constructs are to be noisily rejected.
     Same as:

          -fno-ugly-args -fno-ugly-assign -fno-ugly-assumed
          -fno-ugly-comma -fno-ugly-complex -fno-ugly-init
          -fno-ugly-logint

     *Note Distensions::, for more information.

`-ff66'
     Specify that the program is written in idiomatic FORTRAN 66.  Same
     as `-fonetrip -fugly-assumed'.

     The `-fno-f66' option is the inverse of `-ff66'.  As such, it is
     the same as `-fno-onetrip -fno-ugly-assumed'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.

`-ff77'
     Specify that the program is written in idiomatic UNIX FORTRAN 77
     and/or the dialect accepted by the `f2c' product.  Same as
     `-fbackslash -fno-typeless-boz'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.

`-fno-f77'
     The `-fno-f77' option is *not* the inverse of `-ff77'.  It
     specifies that the program is not written in idiomatic UNIX
     FORTRAN 77 or `f2c', but in a more widely portable dialect.
     `-fno-f77' is the same as `-fno-backslash'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.


File: g77.info,  Node: Fortran Dialect Options,  Next: Warning Options,  Prev: Shorthand Options,  Up: Invoking G77

Options Controlling Fortran Dialect
===================================

   The following options control the dialect of Fortran that the
compiler accepts:

`-ffree-form'

`-fno-fixed-form'
     Specify that the source file is written in free form (introduced
     in Fortran 90) instead of the more-traditional fixed form.

`-ff90'
     Allow certain Fortran-90 constructs.

     This option controls whether certain Fortran 90 constructs are
     recognized.  (Other Fortran 90 constructs might or might not be
     recognized depending on other options such as `-fvxt',
     `-ff90-intrinsics-enable', and the current level of support for
     Fortran 90.)

     *Note Fortran 90::, for more information.

`-fvxt'
     Specify the treatment of certain constructs that have different
     meanings depending on whether the code is written in GNU Fortran
     (based on FORTRAN 77 and akin to Fortran 90) or VXT Fortran (more
     like VAX FORTRAN).

     The default is `-fno-vxt'.  `-fvxt' specifies that the VXT Fortran
     interpretations for those constructs are to be chosen.

     *Note VXT Fortran::, for more information.

`-fdollar-ok'
     Allow `$' as a valid character in a symbol name.

`-fno-backslash'
     Specify that `\' is not to be specially interpreted in character
     and Hollerith constants a la C and many UNIX Fortran compilers.

     For example, with `-fbackslash' in effect, `A\nB' specifies three
     characters, with the second one being newline.  With
     `-fno-backslash', it specifies four characters, `A', `\', `n', and
     `B'.

     Note that `g77' implements a fairly general form of backslash
     processing that is incompatible with the narrower forms supported
     by some other compilers.  For example, `'A\003B'' is a
     three-character string in `g77', whereas other compilers that
     support backslash might not support the three-octal-digit form,
     and thus treat that string as longer than three characters.

     *Note Backslash in Constants::, for information on why
     `-fbackslash' is the default instead of `-fno-backslash'.

`-fno-ugly-args'
     Disallow passing Hollerith and typeless constants as actual
     arguments (for example, `CALL FOO(4HABCD)').

     *Note Ugly Implicit Argument Conversion::, for more information.

`-fugly-assign'
     Use the same storage for a given variable regardless of whether it
     is used to hold an assigned-statement label (as in `ASSIGN 10 TO
     I') or used to hold numeric data (as in `I = 3').

     *Note Ugly Assigned Labels::, for more information.

`-fugly-assumed'
     Assume any dummy array with a final dimension specified as `1' is
     really an assumed-size array, as if `*' had been specified for the
     final dimension instead of `1'.

     For example, `DIMENSION X(1)' is treated as if it had read
     `DIMENSION X(*)'.

     *Note Ugly Assumed-Size Arrays::, for more information.

`-fugly-comma'
     In an external-procedure invocation, treat a trailing comma in the
     argument list as specification of a trailing null argument, and
     treat an empty argument list as specification of a single null
     argument.

     For example, `CALL FOO(,)' is treated as `CALL FOO(%VAL(0),
     %VAL(0))'.  That is, *two* null arguments are specified by the
     procedure call when `-fugly-comma' is in force.  And `F = FUNC()'
     is treated as `F = FUNC(%VAL(0))'.

     The default behavior, `-fno-ugly-comma', is to ignore a single
     trailing comma in an argument list.  So, by default, `CALL
     FOO(X,)' is treated exactly the same as `CALL FOO(X)'.

     *Note Ugly Null Arguments::, for more information.

`-fugly-complex'
     Do not complain about `REAL(EXPR)' or `AIMAG(EXPR)' when EXPR is a
     `COMPLEX' type other than `COMPLEX(KIND=1)'--usually this is used
     to permit `COMPLEX(KIND=2)' (`DOUBLE COMPLEX') operands.

     The `-ff90' option controls the interpretation of this construct.

     *Note Ugly Complex Part Extraction::, for more information.

`-fno-ugly-init'
     Disallow use of Hollerith and typeless constants as initial values
     (in `PARAMETER' and `DATA' statements), and use of character
     constants to initialize numeric types and vice versa.

     For example, `DATA I/'F'/, CHRVAR/65/, J/4HABCD/' is disallowed by
     `-fno-ugly-init'.

     *Note Ugly Conversion of Initializers::, for more information.

`-fugly-logint'
     Treat `INTEGER' and `LOGICAL' variables and expressions as
     potential stand-ins for each other.

     For example, automatic conversion between `INTEGER' and `LOGICAL'
     is enabled, for many contexts, via this option.

     *Note Ugly Integer Conversions::, for more information.

`-fonetrip'
     Imperative executable `DO' loops are to be executed at least once
     each time they are reached.

     ANSI FORTRAN 77 and more recent versions of the Fortran standard
     specify that the body of an imperative `DO' loop is not executed
     if the number of iterations calculated from the parameters of the
     loop is less than 1.  (For example, `DO 10 I = 1, 0'.)  Such a
     loop is called a "zero-trip loop".

     Prior to ANSI FORTRAN 77, many compilers implemented `DO' loops
     such that the body of a loop would be executed at least once, even
     if the iteration count was zero.  Fortran code written assuming
     this behavior is said to require "one-trip loops".  For example,
     some code written to the FORTRAN 66 standard expects this behavior
     from its `DO' loops, although that standard did not specify this
     behavior.

     The `-fonetrip' option specifies that the source file(s) being
     compiled require one-trip loops.

     This option affects only those loops specified by the (imperative)
     `DO' statement and by implied-`DO' lists in I/O statements.  Loops
     specified by implied-`DO' lists in `DATA' and specification
     (non-executable) statements are not affected.

`-ftypeless-boz'
     Specifies that prefix-radix non-decimal constants, such as
     `Z'ABCD'', are typeless instead of `INTEGER(KIND=1)'.

     You can test for yourself whether a particular compiler treats the
     prefix form as `INTEGER(KIND=1)' or typeless by running the
     following program:

          EQUIVALENCE (I, R)
          R = Z'ABCD1234'
          J = Z'ABCD1234'
          IF (J .EQ. I) PRINT *, 'Prefix form is TYPELESS'
          IF (J .NE. I) PRINT *, 'Prefix form is INTEGER'
          END

     Reports indicate that many compilers process this form as
     `INTEGER(KIND=1)', though a few as typeless, and at least one
     based on a command-line option specifying some kind of
     compatibility.

`-fintrin-case-initcap'

`-fintrin-case-upper'

`-fintrin-case-lower'

`-fintrin-case-any'
     Specify expected case for intrinsic names.  `-fintrin-case-lower'
     is the default.

`-fmatch-case-initcap'

`-fmatch-case-upper'

`-fmatch-case-lower'

`-fmatch-case-any'
     Specify expected case for keywords.  `-fmatch-case-lower' is the
     default.

`-fsource-case-upper'

`-fsource-case-lower'

`-fsource-case-preserve'
     Specify whether source text other than character and Hollerith
     constants is to be translated to uppercase, to lowercase, or
     preserved as is.  `-fsource-case-lower' is the default.

`-fsymbol-case-initcap'

`-fsymbol-case-upper'

`-fsymbol-case-lower'

`-fsymbol-case-any'
     Specify valid cases for user-defined symbol names.
     `-fsymbol-case-any' is the default.

`-fcase-strict-upper'
     Same as `-fintrin-case-upper -fmatch-case-upper
     -fsource-case-preserve -fsymbol-case-upper'.  (Requires all
     pertinent source to be in uppercase.)

`-fcase-strict-lower'
     Same as `-fintrin-case-lower -fmatch-case-lower
     -fsource-case-preserve -fsymbol-case-lower'.  (Requires all
     pertinent source to be in lowercase.)

`-fcase-initcap'
     Same as `-fintrin-case-initcap -fmatch-case-initcap
     -fsource-case-preserve -fsymbol-case-initcap'.  (Requires all
     pertinent source to be in initial capitals, as in `Print
     *,SqRt(Value)'.)

`-fcase-upper'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-upper
     -fsymbol-case-any'.  (Maps all pertinent source to uppercase.)

`-fcase-lower'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-lower
     -fsymbol-case-any'.  (Maps all pertinent source to lowercase.)

`-fcase-preserve'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-preserve
     -fsymbol-case-any'.  (Preserves all case in user-defined symbols,
     while allowing any-case matching of intrinsics and keywords.  For
     example, `call Foo(i,I)' would pass two *different* variables
     named `i' and `I' to a procedure named `Foo'.)

`-fbadu77-intrinsics-delete'

`-fbadu77-intrinsics-hide'

`-fbadu77-intrinsics-disable'

`-fbadu77-intrinsics-enable'
     Specify status of UNIX intrinsics having inappropriate forms.
     `-fbadu77-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-ff2c-intrinsics-delete'

`-ff2c-intrinsics-hide'

`-ff2c-intrinsics-disable'

`-ff2c-intrinsics-enable'
     Specify status of f2c-specific intrinsics.
     `-ff2c-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-ff90-intrinsics-delete'

`-ff90-intrinsics-hide'

`-ff90-intrinsics-disable'

`-ff90-intrinsics-enable'
     Specify status of F90-specific intrinsics.
     `-ff90-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-fgnu-intrinsics-delete'

`-fgnu-intrinsics-hide'

`-fgnu-intrinsics-disable'

`-fgnu-intrinsics-enable'
     Specify status of Digital's COMPLEX-related intrinsics.
     `-fgnu-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-fmil-intrinsics-delete'

`-fmil-intrinsics-hide'

`-fmil-intrinsics-disable'

`-fmil-intrinsics-enable'
     Specify status of MIL-STD-1753-specific intrinsics.
     `-fmil-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-funix-intrinsics-delete'

`-funix-intrinsics-hide'

`-funix-intrinsics-disable'

`-funix-intrinsics-enable'
     Specify status of UNIX intrinsics.  `-funix-intrinsics-enable' is
     the default.  *Note Intrinsic Groups::.

`-fvxt-intrinsics-delete'

`-fvxt-intrinsics-hide'

`-fvxt-intrinsics-disable'

`-fvxt-intrinsics-enable'
     Specify status of VXT intrinsics.  `-fvxt-intrinsics-enable' is
     the default.  *Note Intrinsic Groups::.

`-ffixed-line-length-N'
     Set column after which characters are ignored in typical fixed-form
     lines in the source file, and through which spaces are assumed (as
     if padded to that length) after the ends of short fixed-form lines.

     Popular values for N include 72 (the standard and the default), 80
     (card image), and 132 (corresponds to "extended-source" options in
     some popular compilers).  N may be `none', meaning that the entire
     line is meaningful and that continued character constants never
     have implicit spaces appended to them to fill out the line.
     `-ffixed-line-length-0' means the same thing as
     `-ffixed-line-length-none'.

     *Note Source Form::, for more information.


File: g77.info,  Node: Warning Options,  Next: Debugging Options,  Prev: Fortran Dialect Options,  Up: Invoking G77

Options to Request or Suppress Warnings
=======================================

   Warnings are diagnostic messages that report constructions which are
not inherently erroneous but which are risky or suggest there might
have been an error.

   You can request many specific warnings with options beginning `-W',
for example `-Wimplicit' to request warnings on implicit declarations.
Each of these specific warning options also has a negative form
beginning `-Wno-' to turn off warnings; for example, `-Wno-implicit'.
This manual lists only one of the two forms, whichever is not the
default.

   These options control the amount and kinds of warnings produced by
GNU Fortran:

`-fsyntax-only'
     Check the code for syntax errors, but don't do anything beyond
     that.

`-pedantic'
     Issue warnings for uses of extensions to ANSI FORTRAN 77.
     `-pedantic' also applies to C-language constructs where they occur
     in GNU Fortran source files, such as use of `\e' in a character
     constant within a directive like `#include'.

     Valid ANSI FORTRAN 77 programs should compile properly with or
     without this option.  However, without this option, certain GNU
     extensions and traditional Fortran features are supported as well.
     With this option, many of them are rejected.

     Some users try to use `-pedantic' to check programs for strict ANSI
     conformance.  They soon find that it does not do quite what they
     want--it finds some non-ANSI practices, but not all.  However,
     improvements to `g77' in this area are welcome.

`-pedantic-errors'
     Like `-pedantic', except that errors are produced rather than
     warnings.

`-fpedantic'
     Like `-pedantic', but applies only to Fortran constructs.

`-w'
     Inhibit all warning messages.

`-Wno-globals'
     Inhibit warnings about use of a name as both a global name (a
     subroutine, function, or block data program unit, or a common
     block) and implicitly as the name of an intrinsic in a source file.

     Also inhibit warnings about inconsistent invocations and/or
     definitions of global procedures (function and subroutines).  Such
     inconsistencies include different numbers of arguments and
     different types of arguments.

`-Wimplicit'
     Warn whenever a variable, array, or function is implicitly
     declared.  Has an effect similar to using the `IMPLICIT NONE'
     statement in every program unit.  (Some Fortran compilers provide
     this feature by an option named `-u' or `/WARNINGS=DECLARATIONS'.)

`-Wunused'
     Warn whenever a variable is unused aside from its declaration.

`-Wuninitialized'
     Warn whenever an automatic variable is used without first being
     initialized.

     These warnings are possible only in optimizing compilation,
     because they require data-flow information that is computed only
     when optimizing.  If you don't specify `-O', you simply won't get
     these warnings.

     These warnings occur only for variables that are candidates for
     register allocation.  Therefore, they do not occur for a variable
     whose address is taken, or whose size is other than 1, 2, 4 or 8
     bytes.  Also, they do not occur for arrays, even when they are in
     registers.

     Note that there might be no warning about a variable that is used
     only to compute a value that itself is never used, because such
     computations may be deleted by data-flow analysis before the
     warnings are printed.

     These warnings are made optional because GNU Fortran is not smart
     enough to see all the reasons why the code might be correct
     despite appearing to have an error.  Here is one example of how
     this can happen:

          SUBROUTINE DISPAT(J)
          IF (J.EQ.1) I=1
          IF (J.EQ.2) I=4
          IF (J.EQ.3) I=5
          CALL FOO(I)
          END

     If the value of `J' is always 1, 2 or 3, then `I' is always
     initialized, but GNU Fortran doesn't know this.  Here is another
     common case:

          SUBROUTINE MAYBE(FLAG)
          LOGICAL FLAG
          IF (FLAG) VALUE = 9.4
          ...
          IF (FLAG) PRINT *, VALUE
          END

     This has no bug because `VALUE' is used only if it is set.

`-Wall'
     The `-Wunused' and `-Wuninitialized' options combined.  These are
     all the options which pertain to usage that we recommend avoiding
     and that we believe is easy to avoid.  (As more warnings are added
     to `g77', some might be added to the list enabled by `-Wall'.)

   The remaining `-W...' options are not implied by `-Wall' because
they warn about constructions that we consider reasonable to use, on
occasion, in clean programs.

`-Wsurprising'
     Warn about "suspicious" constructs that are interpreted by the
     compiler in a way that might well be surprising to someone reading
     the code.  These differences can result in subtle,
     compiler-dependent (even machine-dependent) behavioral differences.
     The constructs warned about include:

        * Expressions having two arithmetic operators in a row, such as
          `X*-Y'.  Such a construct is nonstandard, and can produce
          unexpected results in more complicated situations such as
          `X**-Y*Z'.  `g77', along with many other compilers, interprets
          this example differently than many programmers, and a few
          other compilers.  Specifically, `g77' interprets `X**-Y*Z' as
          `(X**(-Y))*Z', while others might think it should be
          interpreted as `X**(-(Y*Z))'.

          A revealing example is the constant expression `2**-2*1.',
          which `g77' evaluates to .25, while others might evaluate it
          to 0., the difference resulting from the way precedence
          affects type promotion.

          (The `-fpedantic' option also warns about expressions having
          two arithmetic operators in a row.)

        * Expressions with a unary minus followed by an operand and then
          a binary operator other than plus or minus.  For example,
          `-2**2' produces a warning, because the precedence is
          `-(2**2)', yielding -4, not `(-2)**2', which yields 4, and
          which might represent what a programmer expects.

          An example of an expression producing different results in a
          surprising way is `-I*S', where I holds the value
          `-2147483648' and S holds `0.5'.  On many systems, negating I
          results in the same value, not a positive number, because it
          is already the lower bound of what an `INTEGER(KIND=1)'
          variable can hold.  So, the expression evaluates to a
          positive number, while the "expected" interpretation,
          `(-I)*S', would evaluate to a negative number.

          Even cases such as `-I*J' produce warnings, even though, in
          most configurations and situations, there is no computational
          difference between the results of the two
          interpretations--the purpose of this warning is to warn about
          differing interpretations and encourage a better style of
          coding, not to identify only those places where bugs might
          exist in the user's code.

        * `DO' loops with `DO' variables that are not of integral
          type--that is, using `REAL' variables as loop control
          variables.  Although such loops can be written to work in the
          "obvious" way, the way `g77' is required by the Fortran
          standard to interpret such code is likely to be quite
          different from the way many programmers expect.  (This is
          true of all `DO' loops, but the differences are pronounced
          for non-integral loop control variables.)

          *Note Loops::, for more information.

`-Werror'
     Make all warnings into errors.

`-W'
     Turns on "extra warnings" and, if optimization is specified via
     `-O', the `-Wuninitialized' option.  (This might change in future
     versions of `g77'.)

     "Extra warnings" are issued for:

        * Unused parameters to a procedure (when `-Wunused' also is
          specified).

        * Overflows involving floating-point constants (not available
          for certain configurations).

   *Note Options to Request or Suppress Warnings: (gcc)Warning Options,
for information on more options offered by the GBE shared by `g77',
`gcc', and other GNU compilers.

   Some of these have no effect when compiling programs written in
Fortran:

`-Wcomment'

`-Wformat'

`-Wparentheses'

`-Wswitch'

`-Wtraditional'

`-Wshadow'

`-Wid-clash-LEN'

`-Wlarger-than-LEN'

`-Wconversion'

`-Waggregate-return'

`-Wredundant-decls'
     These options all could have some relevant meaning for GNU Fortran
     programs, but are not yet supported.


File: g77.info,  Node: Debugging Options,  Next: Optimize Options,  Prev: Warning Options,  Up: Invoking G77

Options for Debugging Your Program or GNU Fortran
=================================================

   GNU Fortran has various special options that are used for debugging
either your program or `g77'.

`-g'
     Produce debugging information in the operating system's native
     format (stabs, COFF, XCOFF, or DWARF).  GDB can work with this
     debugging information.

     Support for this option in Fortran programs is incomplete.  In
     particular, names of variables and arrays in common blocks or that
     are storage-associated via `EQUIVALENCE' are unavailable to the
     debugger.

     However, version 0.5.19 of `g77' does provide this information in
     a rudimentary way, as controlled by the `-fdebug-kludge' option.

     *Note Options for Code Generation Conventions: Code Gen Options,
     for more information.

   *Note Options for Debugging Your Program or GNU CC: (gcc)Debugging
Options, for more information on debugging options.


File: g77.info,  Node: Optimize Options,  Next: Preprocessor Options,  Prev: Debugging Options,  Up: Invoking G77

Options That Control Optimization
=================================

   Most Fortran users will want to use no optimization when developing
and testing programs, and use `-O' or `-O2' when compiling programs for
late-cycle testing and for production use.

   The following flags have particular applicability when compiling
Fortran programs:

`-malign-double'
     (Intel 386 architecture only.)

     Noticeably improves performance of `g77' programs making heavy use
     of `REAL(KIND=2)' (`DOUBLE PRECISION') data on some systems.  In
     particular, systems using Pentium, Pentium Pro, 586, and 686
     implementations of the i386 architecture execute programs faster
     when `REAL(KIND=2)' (`DOUBLE PRECISION') data are aligned on
     64-bit boundaries in memory.

     This option can, at least, make benchmark results more consistent
     across various system configurations, versions of the program, and
     data sets.

     *Note:* The warning in the `gcc' documentation about this option
     does not apply, generally speaking, to Fortran code compiled by
     `g77'.

     *Also note:* `g77' fixes a `gcc' backend bug to allow
     `-malign-double' to work generally, not just with
     statically-allocated data.

     *Also also note:* The negative form of `-malign-double' is
     `-mno-align-double', not `-benign-double'.

`-ffloat-store'
     Might help a Fortran program that depends on exact IEEE conformance
     on some machines, but might slow down a program that doesn't.

`-fforce-mem'

`-fforce-addr'
     Might improve optimization of loops.

`-fno-inline'
     Don't compile statement functions inline.  Might reduce the size
     of a program unit--which might be at expense of some speed (though
     it should compile faster).  Note that if you are not optimizing,
     no functions can be expanded inline.

`-ffast-math'
     Might allow some programs designed to not be too dependent on IEEE
     behavior for floating-point to run faster, or die trying.

`-fstrength-reduce'
     Might make some loops run faster.

`-frerun-cse-after-loop'

`-fexpensive-optimizations'

`-fdelayed-branch'

`-fschedule-insns'

`-fschedule-insns2'

`-fcaller-saves'
     Might improve performance on some code.

`-funroll-loops'
     Definitely improves performance on some code.

`-funroll-all-loops'
     Definitely improves performance on some code.

`-fno-move-all-movables'

`-fno-reduce-all-givs'

`-fno-rerun-loop-opt'
     Each of these might improve performance on some code.

     Analysis of Fortran code optimization and the resulting
     optimizations triggered by the above options were contributed by
     Toon Moene (<toon@moene.indiv.nluug.nl>).

     These three options are intended to be removed someday, once they
     have helped determine the efficacy of various approaches to
     improving the performance of Fortran code.

     Please let us know how use of these options affects the
     performance of your production code.  We're particularly
     interested in code that runs faster when these options are
     *disabled*, and in non-Fortran code that benefits when they are
     *enabled* via the above `gcc' command-line options.

   *Note Options That Control Optimization: (gcc)Optimize Options, for
more information on options to optimize the generated machine code.


File: g77.info,  Node: Preprocessor Options,  Next: Directory Options,  Prev: Optimize Options,  Up: Invoking G77

Options Controlling the Preprocessor
====================================

   These options control the C preprocessor, which is run on each C
source file before actual compilation.

   *Note Options Controlling the Preprocessor: (gcc)Preprocessor
Options, for information on C preprocessor options.

   Some of these options also affect how `g77' processes the `INCLUDE'
directive.  Since this directive is processed even when preprocessing
is not requested, it is not described in this section.  *Note Options
for Directory Search: Directory Options, for information on how `g77'
processes the `INCLUDE' directive.

   However, the `INCLUDE' directive does not apply preprocessing to the
contents of the included file itself.

   Therefore, any file that contains preprocessor directives (such as
`#include', `#define', and `#if') must be included via the `#include'
directive, not via the `INCLUDE' directive.  Therefore, any file
containing preprocessor directives, if included, is necessarily
included by a file that itself contains preprocessor directives.


File: g77.info,  Node: Directory Options,  Next: Code Gen Options,  Prev: Preprocessor Options,  Up: Invoking G77

Options for Directory Search
============================

   These options affect how the `cpp' preprocessor searches for files
specified via the `#include' directive.  Therefore, when compiling
Fortran programs, they are meaningful when the preproecssor is used.

   Some of these options also affect how `g77' searches for files
specified via the `INCLUDE' directive, although files included by that
directive are not, themselves, preprocessed.  These options are:

`-I-'

`-IDIR'
     These affect interpretation of the `INCLUDE' directive (as well as
     of the `#include' directive of the `cpp' preprocessor).

     Note that `-IDIR' must be specified *without* any spaces between
     `-I' and the directory name--that is, `-Ifoo/bar' is valid, but
     `-I foo/bar' is rejected by the `g77' compiler (though the
     preprocessor supports the latter form).  Also note that the
     general behavior of `-I' and `INCLUDE' is pretty much the same as
     of `-I' with `#include' in the `cpp' preprocessor, with regard to
     looking for `header.gcc' files and other such things.

     *Note Options for Directory Search: (gcc)Directory Options, for
     information on the `-I' option.


File: g77.info,  Node: Code Gen Options,  Next: Environment Variables,  Prev: Directory Options,  Up: Invoking G77

Options for Code Generation Conventions
=======================================

   These machine-independent options control the interface conventions
used in code generation.

   Most of them have both positive and negative forms; the negative form
of `-ffoo' would be `-fno-foo'.  In the table below, only one of the
forms is listed--the one which is not the default.  You can figure out
the other form by either removing `no-' or adding it.

`-fno-automatic'
     Treat each program unit as if the `SAVE' statement was specified
     for every local variable and array referenced in it.  Does not
     affect common blocks.  (Some Fortran compilers provide this option
     under the name `-static'.)

`-finit-local-zero'
     Specify that variables and arrays that are local to a program unit
     (not in a common block and not passed as an argument) are to be
     initialized to binary zeros.

     Since there is a run-time penalty for initialization of variables
     that are not given the `SAVE' attribute, it might be a good idea
     to also use `-fno-automatic' with `-finit-local-zero'.

`-fno-f2c'
     Do not generate code designed to be compatible with code generated
     by `f2c'; use the GNU calling conventions instead.

     The `f2c' calling conventions require functions that return type
     `REAL(KIND=1)' to actually return the C type `double', and
     functions that return type `COMPLEX' to return the values via an
     extra argument in the calling sequence that points to where to
     store the return value.  Under the GNU calling conventions, such
     functions simply return their results as they would in GNU
     C--`REAL(KIND=1)' functions return the C type `float', and
     `COMPLEX' functions return the GNU C type `complex' (or its
     `struct' equivalent).

     This does not affect the generation of code that interfaces with
     the `libf2c' library.

     However, because the `libf2c' library uses `f2c' calling
     conventions, `g77' rejects attempts to pass intrinsics implemented
     by routines in this library as actual arguments when `-fno-f2c' is
     used, to avoid bugs when they are actually called by code
     expecting the GNU calling conventions to work.

     For example, `INTRINSIC ABS;CALL FOO(ABS)' is rejected when
     `-fno-f2c' is in force.  (Future versions of the `g77' run-time
     library might offer routines that provide GNU-callable versions of
     the routines that implement the `f2c'-callable intrinsics that may
     be passed as actual arguments, so that valid programs need not be
     rejected when `-fno-f2c' is used.)

     *Caution:* If `-fno-f2c' is used when compiling any source file
     used in a program, it must be used when compiling *all* Fortran
     source files used in that program.

`-ff2c-library'
     Specify that use of `libf2c' is required.  This is the default for
     the current version of `g77'.

     Currently it is not valid to specify `-fno-f2c-library'.  This
     option is provided so users can specify it in shell scripts that
     build programs and libraries that require the `libf2c' library,
     even when being compiled by future versions of `g77' that might
     otherwise default to generating code for an incompatible library.

`-fno-underscoring'
     Do not transform names of entities specified in the Fortran source
     file by appending underscores to them.

     With `-funderscoring' in effect, `g77' appends two underscores to
     names with underscores and one underscore to external names with
     no underscores.  (`g77' also appends two underscores to internal
     names with underscores to avoid naming collisions with external
     names.  The `-fno-second-underscore' option disables appending of
     the second underscore in all cases.)

     This is done to ensure compatibility with code produced by many
     UNIX Fortran compilers, including `f2c', which perform the same
     transformations.

     Use of `-fno-underscoring' is not recommended unless you are
     experimenting with issues such as integration of (GNU) Fortran into
     existing system environments (vis-a-vis existing libraries, tools,
     and so on).

     For example, with `-funderscoring', and assuming other defaults
     like `-fcase-lower' and that `j()' and `max_count()' are external
     functions while `my_var' and `lvar' are local variables, a
     statement like

          I = J() + MAX_COUNT (MY_VAR, LVAR)

     is implemented as something akin to:

          i = j_() + max_count__(&my_var__, &lvar);

     With `-fno-underscoring', the same statement is implemented as:

          i = j() + max_count(&my_var, &lvar);

     Use of `-fno-underscoring' allows direct specification of
     user-defined names while debugging and when interfacing
     `g77'-compiled code with other languages.

     Note that just because the names match does *not* mean that the
     interface implemented by `g77' for an external name matches the
     interface implemented by some other language for that same name.
     That is, getting code produced by `g77' to link to code produced
     by some other compiler using this or any other method can be only a
     small part of the overall solution--getting the code generated by
     both compilers to agree on issues other than naming can require
     significant effort, and, unlike naming disagreements, linkers
     normally cannot detect disagreements in these other areas.

     Also, note that with `-fno-underscoring', the lack of appended
     underscores introduces the very real possibility that a
     user-defined external name will conflict with a name in a system
     library, which could make finding unresolved-reference bugs quite
     difficult in some cases--they might occur at program run time, and
     show up only as buggy behavior at run time.

     In future versions of `g77', we hope to improve naming and linking
     issues so that debugging always involves using the names as they
     appear in the source, even if the names as seen by the linker are
     mangled to prevent accidental linking between procedures with
     incompatible interfaces.

`-fno-second-underscore'
     Do not append a second underscore to names of entities specified
     in the Fortran source file.

     This option has no effect if `-fno-underscoring' is in effect.

     Otherwise, with this option, an external name such as `MAX_COUNT'
     is implemented as a reference to the link-time external symbol
     `max_count_', instead of `max_count__'.

`-fno-ident'
     Ignore the `#ident' directive.

`-fzeros'
     Treat initial values of zero as if they were any other value.

     As of version 0.5.18, `g77' normally treats `DATA' and other
     statements that are used to specify initial values of zero for
     variables and arrays as if no values were actually specified, in
     the sense that no diagnostics regarding multiple initializations
     are produced.

     This is done to speed up compiling of programs that initialize
     large arrays to zeros.

     Use `-fzeros' to revert to the simpler, slower behavior that can
     catch multiple initializations by keeping track of all
     initializations, zero or otherwise.

     *Caution:* Future versions of `g77' might disregard this option
     (and its negative form, the default) or interpret it somewhat
     differently.  The interpretation changes will affect only
     non-standard programs; standard-conforming programs should not be
     affected.

`-fdebug-kludge'
     Emit information on `COMMON' and `EQUIVALENCE' members that might
     help users of debuggers work around lack of proper debugging
     information on such members.

     As of version 0.5.19, `g77' offers this option to emit information
     on members of aggregate areas to help users while debugging.  This
     information consists of establishing the type and contents of each
     such member so that, when a debugger is asked to print the
     contents, the printed information provides rudimentary debugging
     information.  This information identifies the name of the
     aggregate area (either the `COMMON' block name, or the
     `g77'-assigned name for the `EQUIVALENCE' name) and the offset, in
     bytes, of the member from the beginning of the area.

     Using `gdb', this information is not coherently displayed in the
     Fortran language mode, so temporarily switching to the C language
     mode to display the information is suggested.  Use `set language
     c' and `set language fortran' to accomplish this.

     For example:

                COMMON /X/A,B
                EQUIVALENCE (C,D)
                CHARACTER XX*50
                EQUIVALENCE (I,XX(20:20))
                END
          
          GDB is free software and you are welcome to distribute copies of it
           under certain conditions; type "show copying" to see the conditions.
          There is absolutely no warranty for GDB; type "show warranty" for details.
          GDB 4.16 (lm-gnits-dwim), Copyright 1996 Free Software Foundation, Inc...
          (gdb) b MAIN__
          Breakpoint 1 at 0t1200000201120112: file cd.f, line 5.
          (gdb) r
          Starting program: /home/user/a.out
          
          Breakpoint 1, MAIN__ () at cd.f:5
          Current language:  auto; currently fortran
          (gdb) set language c
          Warning: the current language does not match this frame.
          (gdb) p a
          $2 = "At (COMMON) `x_' plus 0 bytes"
          (gdb) p b
          $3 = "At (COMMON) `x_' plus 4 bytes"
          (gdb) p c
          $4 = "At (EQUIVALENCE) `__g77_equiv_c' plus 0 bytes"
          (gdb) p d
          $5 = "At (EQUIVALENCE) `__g77_equiv_c' plus 0 bytes"
          (gdb) p i
          $6 = "At (EQUIVALENCE) `__g77_equiv_xx' plus 20 bytes"
          (gdb) p xx
          $7 = "At (EQUIVALENCE) `__g77_equiv_xx' plus 1 bytes"
          (gdb) set language fortran
          (gdb)

     Use `-fdebug-kludge' to generate this information, which might
     make some programs noticeably larger.

     *Caution:* Future versions of `g77' might disregard this option
     (and its negative form).  Current plans call for this to happen
     when published versions of `g77' and `gdb' exist that provide
     proper access to debugging information on `COMMON' and
     `EQUIVALENCE' members.

`-fno-emulate-complex'
     Implement `COMPLEX' arithmetic using the facilities in the `gcc'
     back end that provide direct support of `complex' arithmetic,
     instead of emulating the arithmetic.

     `gcc' has some known problems in its back-end support for
     `complex' arithmetic, due primarily to the support not being
     completed as of version 2.7.2.2.  Other front ends for the `gcc'
     back end avoid this problem by emulating `complex' arithmetic at a
     higher level, so the back end sees arithmetic on the real and
     imaginary components.  To make `g77' more portable to systems
     where `complex' support in the `gcc' back end is particularly
     troublesome, `g77' now defaults to performing the same kinds of
     emulations done by these other front ends.

     Use `-fno-emulate-complex' to try the `complex' support in the
     `gcc' back end, in case it works and produces faster programs.  So
     far, all the known bugs seem to involve compile-time crashes,
     rather than the generation of incorrect code.

     Use of this option should not affect how Fortran code compiled by
     `g77' works in terms of its interfaces to other code, e.g. that
     compiled by `f2c'.

     *Caution:* Future versions of `g77' are likely to change the
     default for this option to `-fno-emulate-complex', and perhaps
     someday ignore both forms of this option.

     Also, it is possible that use of the `-fno-emulate-complex' option
     could result in incorrect code being silently produced by `g77'.
     But, this is generally true of compilers anyway, so, as usual, test
     the programs you compile before assuming they are working.

`-falias-check'

`-fargument-alias'

`-fargument-noalias'

`-fno-argument-noalias-global'
     These options specify to what degree aliasing (overlap) is
     permitted between arguments (passed as pointers) and `COMMON'
     (external, or public) storage.

     The default for Fortran code, as mandated by the FORTRAN 77 and
     Fortran 90 standards, is `-fargument-noalias-global'.  The default
     for code written in the C language family is `-fargument-alias'.

     Note that, on some systems, compiling with `-fforce-addr' in
     effect can produce more optimal code when the default aliasing
     options are in effect (and when optimization is enabled).

     *Note Aliasing Assumed To Work::, for detailed information on the
     implications of compiling Fortran code that depends on the ability
     to alias dummy arguments.

`-fno-globals'
     Disable diagnostics about inter-procedural analysis problems, such
     as disagreements about the type of a function or a procedure's
     argument, that might cause a compiler crash when attempting to
     inline a reference to a procedure within a program unit.  (The
     diagnostics themselves are still produced, but as warnings, unless
     `-Wno-globals' is specified, in which case no relevant diagnostics
     are produced.)

     Further, this option disables such inlining, to avoid compiler
     crashes resulting from incorrect code that would otherwise be
     diagnosed.

     As such, this option might be quite useful when compiling
     existing, "working" code that happens to have a few bugs that do
     not generally show themselves, but `g77' exposes via a diagnostic.

     Use of this option therefore has the effect of instructing `g77'
     to behave more like it did up through version 0.5.19.1, when it
     paid little or no attention to disagreements between program units
     about a procedure's type and argument information, and when it
     performed no inlining of procedures (except statement functions).

     Without this option, `g77' defaults to performing the potentially
     inlining procedures as it started doing in version 0.5.20, but as
     of version 0.5.21, it also diagnoses disagreements that might
     cause such inlining to crash the compiler.

   *Note Options for Code Generation Conventions: (gcc)Code Gen
Options, for information on more options offered by the GBE shared by
`g77', `gcc', and other GNU compilers.

   Some of these do *not* work when compiling programs written in
Fortran:

`-fpcc-struct-return'

`-freg-struct-return'
     You should not use these except strictly the same way as you used
     them to build the version of `libf2c' with which you will be
     linking all code compiled by `g77' with the same option.

`-fshort-double'
     This probably either has no effect on Fortran programs, or makes
     them act loopy.

`-fno-common'
     Do not use this when compiling Fortran programs, or there will be
     Trouble.

`-fpack-struct'
     This probably will break any calls to the `libf2c' library, at the
     very least, even if it is built with the same option.


File: g77.info,  Node: Environment Variables,  Prev: Code Gen Options,  Up: Invoking G77

Environment Variables Affecting GNU Fortran
===========================================

   GNU Fortran currently does not make use of any environment variables
to control its operation above and beyond those that affect the
operation of `gcc'.

   *Note Environment Variables Affecting GNU CC: (gcc)Environment
Variables, for information on environment variables.


File: g77.info,  Node: News,  Next: Changes,  Prev: Invoking G77,  Up: Top

News About GNU Fortran
**********************

   Changes made to recent versions of GNU Fortran are listed below,
with the most recent version first.

   The changes are generally listed in order:

  1. Code-generation and run-time-library bugs

  2. Compiler and run-time-library crashes involving valid code

  3. New features

  4. Fixes and enhancements to existing features

  5. New diagnostics

  6. Internal improvements

  7. Miscellany

   This order is not strict--for example, some items involve a
combination of these elements.

In 0.5.22:
==========

   * Fix code generation for iterative `DO' loops that have one or more
     references to the iteration variable, or to aliases of it, in
     their control expressions.  For example, `DO 10 J=2,J' now is
     compiled correctly.

   * Fix a code-generation bug that afflicted Intel x86 targets when
     `-O2' was specified compiling, for example, an old version of the
     `DNRM2' routine.

     The x87 coprocessor stack was being mismanaged in cases involving
     assigned `GOTO' and `ASSIGN'.

   * Fix `DTime' intrinsic so as not to truncate results to integer
     values (on some systems).

   * Fix `SIGNAL' intrinsic so it offers portable support for 64-bit
     systems (such as Digital Alphas running GNU/Linux).

   * Fix run-time crash involving `NAMELIST' on 64-bit machines such as
     Alphas.

   * Fix `g77' version of `libf2c' so it no longer produces a spurious
     `I/O recursion' diagnostic at run time when an I/O operation (such
     as `READ *,I') is interrupted in a manner that causes the program
     to be terminated via the `f_exit' routine (such as via `C-c').

   * Fix `g77' crash triggered by `CASE' statement with an omitted
     lower or upper bound.

   * Fix `g77' crash compiling references to `CPU_Time' intrinsic.

   * Fix `g77' crash (or apparently infinite run-time) when compiling
     certain complicated expressions involving `COMPLEX' arithmetic
     (especially multiplication).

   * Fix `g77' crash on statements such as `PRINT *,
     (REAL(Z(I)),I=1,2)', where `Z' is `DOUBLE COMPLEX'.

   * Fix a `g++' crash.

   * Support `FORMAT(I<EXPR>)' when EXPR is a compile-time constant
     `INTEGER' expression.

   * Fix `g77' `-g' option so procedures that use `ENTRY' can be
     stepped through, line by line, in `gdb'.

   * Fix a profiling-related bug in `gcc' back end for Intel x86
     architecture.

   * Allow any `REAL' argument to intrinsics `Second' and `CPU_Time'.

   * Allow any numeric argument to intrinsics `Int2' and `Int8'.

   * Use `tempnam', if available, to open scratch files (as in
     `OPEN(STATUS='SCRATCH')' so that the `TMPDIR' environment variable,
     if present, is used.

   * Rename the `gcc' keyword `restrict' to `__restrict__', to avoid
     rejecting valid, existing, C programs.  Support for `restrict' is
     now more like support for `complex'.

   * Fix `-fpedantic' to not reject procedure invocations such as
     `I=J()' and `CALL FOO()'.

   * Fix `-fugly-comma' to affect invocations of only external
     procedures.  Restore rejection of gratuitous trailing omitted
     arguments to intrinsics, as in `I=MAX(3,4,,)'.

   * Fix compiler so it accepts `-fgnu-intrinsics-*' and
     `-fbadu77-intrinsics-*' options.

   * Improve diagnostic messages from `libf2c' so it is more likely
     that the printing of the active format string is limited to the
     string, with no trailing garbage being printed.

     (Unlike `f2c', `g77' did not append a null byte to its compiled
     form of every format string specified via a `FORMAT' statement.
     However, `f2c' would exhibit the problem anyway for a statement
     like `PRINT '(I)garbage', 1' by printing `(I)garbage' as the
     format string.)

   * Improve compilation of FORMAT expressions so that a null byte is
     appended to the last operand if it is a constant.  This provides a
     cleaner run-time diagnostic as provided by `libf2c' for statements
     like `PRINT '(I1', 42'.

   * Fix various crashes involving code with diagnosed errors.

   * Fix cross-compilation bug when configuring `libf2c'.

   * Improve diagnostics.

   * Improve documentation and indexing.

   * Upgrade to `libf2c' as of 1997-09-23.  This fixes a formatted-I/O
     bug that afflicted 64-bit systems with 32-bit integers (such as
     Digital Alpha running GNU/Linux).

In 0.5.21:
==========

   * Fix a code-generation bug introduced by 0.5.20 caused by loop
     unrolling (by specifying `-funroll-loops' or similar).  This bug
     afflicted all code compiled by version 2.7.2.2.f.2 of `gcc' (C,
     C++, Fortran, and so on).

   * Fix a code-generation bug manifested when combining local
     `EQUIVALENCE' with a `DATA' statement that follows the first
     executable statement (or is treated as an executable-context
     statement as a result of using the `-fpedantic' option).

   * Fix a compiler crash that occured when an integer division by a
     constant zero is detected.  Instead, when the `-W' option is
     specified, the `gcc' back end issues a warning about such a case.
     This bug afflicted all code compiled by version 2.7.2.2.f.2 of
     `gcc' (C, C++, Fortran, and so on).

   * Fix a compiler crash that occurred in some cases of procedure
     inlining.  (Such cases became more frequent in 0.5.20.)

   * Fix a compiler crash resulting from using `DATA' or similar to
     initialize a `COMPLEX' variable or array to zero.

   * Fix compiler crashes involving use of `AND', `OR', or `XOR'
     intrinsics.

   * Fix compiler bug triggered when using a `COMMON' or `EQUIVALENCE'
     variable as the target of an `ASSIGN' or assigned-`GOTO' statement.

   * Fix compiler crashes due to using the name of a some non-standard
     intrinsics (such as `FTELL' or `FPUTC') as such and as the name of
     a procedure or common block.  Such dual use of a name in a program
     is allowed by the standard.

   * Place automatic arrays on the stack, even if `SAVE' or the
     `-fno-automatic' option is in effect.  This avoids a compiler
     crash in some cases.

   * The `-malign-double' option now reliably aligns `DOUBLE PRECISION'
     optimally on Pentium and Pentium Pro architectures (586 and 686 in
     `gcc').

   * New option `-Wno-globals' disables warnings about "suspicious" use
     of a name both as a global name and as the implicit name of an
     intrinsic, and warnings about disagreements over the number or
     natures of arguments passed to global procedures, or the natures
     of the procedures themselves.

     The default is to issue such warnings, which are new as of this
     version of `g77'.

   * New option `-fno-globals' disables diagnostics about potentially
     fatal disagreements analysis problems, such as disagreements over
     the number or natures of arguments passed to global procedures, or
     the natures of those procedures themselves.

     The default is to issue such diagnostics and flag the compilation
     as unsuccessful.  With this option, the diagnostics are issued as
     warnings, or, if `-Wno-globals' is specified, are not issued at
     all.

     This option also disables inlining of global procedures, to avoid
     compiler crashes resulting from coding errors that these
     diagnostics normally would identify.

   * Diagnose cases where a reference to a procedure disagrees with the
     type of that procedure, or where disagreements about the number or
     nature of arguments exist.  This avoids a compiler crash.

   * Fix parsing bug whereby `g77' rejected a second initialization
     specification immediately following the first's closing `/' without
     an intervening comma in a `DATA' statement, and the second
     specification was an implied-DO list.

   * Improve performance of the `gcc' back end so certain complicated
     expressions involving `COMPLEX' arithmetic (especially
     multiplication) don't appear to take forever to compile.

   * Fix a couple of profiling-related bugs in `gcc' back end.

   * Integrate GNU Ada's (GNAT's) changes to the back end, which
     consist almost entirely of bug fixes.  These fixes are circa
     version 3.10p of GNAT.

   * Include some other `gcc' fixes that seem useful in `g77''s version
     of `gcc'.  (See `gcc/ChangeLog' for details--compare it to that
     file in the vanilla `gcc-2.7.2.3.tar.gz' distribution.)

   * Fix `libU77' routines that accept file and other names to strip
     trailing blanks from them, for consistency with other
     implementations.  Blanks may be forcibly appended to such names by
     appending a single null character (`CHAR(0)') to the significant
     trailing blanks.

   * Fix `CHMOD' intrinsic to work with file names that have embedded
     blanks, commas, and so on.

   * Fix `SIGNAL' intrinsic so it accepts an optional third `Status'
     argument.

   * Fix `IDATE()' intrinsic subroutine (VXT form) so it accepts
     arguments in the correct order.  Documentation fixed accordingly,
     and for `GMTIME()' and `LTIME()' as well.

   * Make many changes to `libU77' intrinsics to support existing code
     more directly.

     Such changes include allowing both subroutine and function forms
     of many routines, changing `MCLOCK()' and `TIME()' to return
     `INTEGER(KIND=1)' values, introducing `MCLOCK8()' and `TIME8()' to
     return `INTEGER(KIND=2)' values, and placing functions that are
     intended to perform side effects in a new intrinsic group,
     `badu77'.

   * Improve `libU77' so it is more portable.

   * Add options `-fbadu77-intrinsics-delete',
     `-fbadu77-intrinsics-hide', and so on.

   * Fix crashes involving diagnosed or invalid code.

   * `g77' and `gcc' now do a somewhat better job detecting and
     diagnosing arrays that are too large to handle before these cause
     diagnostics during the assembler or linker phase, a compiler
     crash, or generation of incorrect code.

   * Make some fixes to alias analysis code.

   * Add support for `restrict' keyword in `gcc' front end.

   * Support `gcc' version 2.7.2.3 (modified by `g77' into version
     2.7.2.3.f.1), and remove support for prior versions of `gcc'.

   * Incorporate GNAT's patches to the `gcc' back end into `g77''s, so
     GNAT users do not need to apply GNAT's patches to build both GNAT
     and `g77' from the same source tree.

   * Modify `make' rules and related code so that generation of Info
     documentation doesn't require compilation using `gcc'.  Now, any
     ANSI C compiler should be adequate to produce the `g77'
     documentation (in particular, the tables of intrinsics) from
     scratch.

   * Add `INT2' and `INT8' intrinsics.

   * Add `CPU_TIME' intrinsic.

   * Add `ALARM' intrinsic.

   * `CTIME' intrinsic now accepts any `INTEGER' argument, not just
     `INTEGER(KIND=2)'.

   * Warn when explicit type declaration disagrees with the type of an
     intrinsic invocation.

   * Support `*f771' entry in `gcc' `specs' file.

   * Fix typo in `make' rule `g77-cross', used only for cross-compiling.

   * Fix `libf2c' build procedure to re-archive library if previous
     attempt to archive was interrupted.

   * Change `gcc' to unroll loops only during the last invocation (of
     as many as two invocations) of loop optimization.

   * Improve handling of `-fno-f2c' so that code that attempts to pass
     an intrinsic as an actual argument, such as `CALL FOO(ABS)', is
     rejected due to the fact that the run-time-library routine is,
     effectively, compiled with `-ff2c' in effect.

   * Fix `g77' driver to recognize `-fsyntax-only' as an option that
     inhibits linking, just like `-c' or `-S', and to recognize and
     properly handle the `-nostdlib', `-M', `-MM', `-nodefaultlibs',
     and `-Xlinker' options.

   * Upgrade to `libf2c' as of 1997-08-16.

   * Modify `libf2c' to consistently and clearly diagnose recursive I/O
     (at run time).

   * `g77' driver now prints version information (such as produced by
     `g77 -v') to `stderr' instead of `stdout'.

   * The `.r' suffix now designates a Ratfor source file, to be
     preprocessed via the `ratfor' command, available separately.

   * Fix some aspects of how `gcc' determines what kind of system is
     being configured and what kinds are supported.  For example, GNU
     Linux/Alpha ELF systems now are directly supported.

   * Improve diagnostics.

   * Improve documentation and indexing.

   * Include all pertinent files for `libf2c' that come from
     `netlib.bell-labs.com'; give any such files that aren't quite
     accurate in `g77''s version of `libf2c' the suffix `.netlib'.

   * Reserve `INTEGER(KIND=0)' for future use.

In 0.5.20:
==========

   * The `-fno-typeless-boz' option is now the default.

     This option specifies that non-decimal-radix constants using the
     prefixed-radix form (such as `Z'1234'') are to be interpreted as
     `INTEGER' constants.  Specify `-ftypeless-boz' to cause such
     constants to be interpreted as typeless.

     (Version 0.5.19 introduced `-fno-typeless-boz' and its inverse.)

   * Options `-ff90-intrinsics-enable' and `-fvxt-intrinsics-enable'
     now are the defaults.

     Some programs might use names that clash with intrinsic names
     defined (and now enabled) by these options or by the new `libU77'
     intrinsics.  Users of such programs might need to compile them
     differently (using, for example, `-ff90-intrinsics-disable') or,
     better yet, insert appropriate `EXTERNAL' statements specifying
     that these names are not intended to be names of intrinsics.

   * The `ALWAYS_FLUSH' macro is no longer defined when building
     `libf2c', which should result in improved I/O performance,
     especially over NFS.

     *Note:* If you have code that depends on the behavior of `libf2c'
     when built with `ALWAYS_FLUSH' defined, you will have to modify
     `libf2c' accordingly before building it from this and future
     versions of `g77'.

   * Dave Love's implementation of `libU77' has been added to the
     version of `libf2c' distributed with and built as part of `g77'.
     `g77' now knows about the routines in this library as intrinsics.

   * New option `-fvxt' specifies that the source file is written in
     VXT Fortran, instead of GNU Fortran.

   * The `-fvxt-not-f90' option has been deleted, along with its
     inverse, `-ff90-not-vxt'.

     If you used one of these deleted options, you should re-read the
     pertinent documentation to determine which options, if any, are
     appropriate for compiling your code with this version of `g77'.

   * The `-fugly' option now issues a warning, as it likely will be
     removed in a future version.

     (Enabling all the `-fugly-*' options is unlikely to be feasible,
     or sensible, in the future, so users should learn to specify only
     those `-fugly-*' options they really need for a particular source
     file.)

   * The `-fugly-assumed' option, introduced in version 0.5.19, has
     been changed to better accommodate old and new code.

   * Make a number of fixes to the `g77' front end and the `gcc' back
     end to better support Alpha (AXP) machines.  This includes
     providing at least one bug-fix to the `gcc' back end for Alphas.

   * Related to supporting Alpha (AXP) machines, the `LOC()' intrinsic
     and `%LOC()' construct now return values of integer type that is
     the same width (holds the same number of bits) as the pointer type
     on the machine.

     On most machines, this won't make a difference, whereas on Alphas,
     the type these constructs return is `INTEGER*8' instead of the
     more common `INTEGER*4'.

   * Emulate `COMPLEX' arithmetic in the `g77' front end, to avoid bugs
     in `complex' support in the `gcc' back end.  New option
     `-fno-emulate-complex' causes `g77' to revert the 0.5.19 behavior.

   * Fix bug whereby `REAL A(1)', for example, caused a compiler crash
     if `-fugly-assumed' was in effect and A was a local (automatic)
     array.  That case is no longer affected by the new handling of
     `-fugly-assumed'.

   * Fix `g77' command driver so that `g77 -o foo.f' no longer deletes
     `foo.f' before issuing other diagnostics, and so the `-x' option
     is properly handled.

   * Enable inlining of subroutines and functions by the `gcc' back end.
     This works as it does for `gcc' itself--program units may be
     inlined for invocations that follow them in the same program unit,
     as long as the appropriate compile-time options are specified.

   * Dummy arguments are no longer assumed to potentially alias
     (overlap) other dummy arguments or `COMMON' areas when any of
     these are defined (assigned to) by Fortran code.

     This can result in faster and/or smaller programs when compiling
     with optimization enabled, though on some systems this effect is
     observed only when `-fforce-addr' also is specified.

     New options `-falias-check', `-fargument-alias',
     `-fargument-noalias', and `-fno-argument-noalias-global' control
     the way `g77' handles potential aliasing.

   * The `CONJG()' and `DCONJG()' intrinsics now are compiled in-line.

   * The bug-fix for 0.5.19.1 has been re-done.  The `g77' compiler has
     been changed back to assume `libf2c' has no aliasing problems in
     its implementations of the `COMPLEX' (and `DOUBLE COMPLEX')
     intrinsics.  The `libf2c' has been changed to have no such
     problems.

     As a result, 0.5.20 is expected to offer improved performance over
     0.5.19.1, perhaps as good as 0.5.19 in most or all cases, due to
     this change alone.

     *Note:* This change requires version 0.5.20 of `libf2c', at least,
     when linking code produced by any versions of `g77' other than
     0.5.19.1.  Use `g77 -v' to determine the version numbers of the
     `libF77', `libI77', and `libU77' components of the `libf2c'
     library.  (If these version numbers are not printed--in
     particular, if the linker complains about unresolved references to
     names like `g77__fvers__'--that strongly suggests your
     installation has an obsolete version of `libf2c'.)

   * New option `-fugly-assign' specifies that the same memory
     locations are to be used to hold the values assigned by both
     statements `I = 3' and `ASSIGN 10 TO I', for example.  (Normally,
     `g77' uses a separate memory location to hold assigned statement
     labels.)

   * `FORMAT' and `ENTRY' statements now are allowed to precede
     `IMPLICIT NONE' statements.

   * Produce diagnostic for unsupported `SELECT CASE' on `CHARACTER'
     type, instead of crashing, at compile time.

   * Fix crashes involving diagnosed or invalid code.

   * Change approach to building `libf2c' archive (`libf2c.a') so that
     members are added to it only when truly necessary, so the user
     that installs an already-built `g77' doesn't need to have write
     access to the build tree (whereas the user doing the build might
     not have access to install new software on the system).

   * Support `gcc' version 2.7.2.2 (modified by `g77' into version
     2.7.2.2.f.2), and remove support for prior versions of `gcc'.

   * Upgrade to `libf2c' as of 1997-02-08, and fix up some of the build
     procedures.

   * Improve general build procedures for `g77', fixing minor bugs
     (such as deletion of any file named `f771' in the parent directory
     of `gcc/').

   * Enable full support of `INTEGER*8' available in `libf2c' and
     `f2c.h' so that `f2c' users may make full use of its features via
     the `g77' version of `f2c.h' and the `INTEGER*8' support routines
     in the `g77' version of `libf2c'.

   * Improve `g77' driver and `libf2c' so that `g77 -v' yields version
     information on the library.

   * The `SNGL' and `FLOAT' intrinsics now are specific intrinsics,
     instead of synonyms for the generic intrinsic `REAL'.

   * New intrinsics have been added.  These are `REALPART', `IMAGPART',
     `COMPLEX', `LONG', and `SHORT'.

   * A new group of intrinsics, `gnu', has been added to contain the
     new `REALPART', `IMAGPART', and `COMPLEX' intrinsics.  An old
     group, `dcp', has been removed.

   * Complain about industry-wide ambiguous references `REAL(EXPR)' and
     `AIMAG(EXPR)', where EXPR is `DOUBLE COMPLEX' (or any complex type
     other than `COMPLEX'), unless `-ff90' option specifies Fortran 90
     interpretation or new `-fugly-complex' option, in conjunction with
     `-fnot-f90', specifies `f2c' interpretation.

   * Make improvements to diagnostics.

   * Speed up compiler a bit.

   * Improvements to documentation and indexing, including a new
     chapter containing information on one, later more, diagnostics
     that users are directed to pull up automatically via a message in
     the diagnostic itself.

     (Hence the menu item `M' for the node `Diagnostics' in the
     top-level menu of the Info documentation.)

In 0.5.19.1:
============

   * Code-generation bugs afflicting operations on complex data have
     been fixed.

     These bugs occurred when assigning the result of an operation to a
     complex variable (or array element) that also served as an input
     to that operation.

     The operations affected by this bug were: `CONJG()', `DCONJG()',
     `CCOS()', `CDCOS()', `CLOG()', `CDLOG()', `CSIN()', `CDSIN()',
     `CSQRT()', `CDSQRT()', complex division, and raising a `DOUBLE
     COMPLEX' operand to an `INTEGER' power.  (The related generic and
     `Z'-prefixed intrinsics, such as `ZSIN()', also were affected.)

     For example, `C = CSQRT(C)', `Z = Z/C', and `Z = Z**I' (where `C'
     is `COMPLEX' and `Z' is `DOUBLE COMPLEX') have been fixed.

In 0.5.19:
==========

   * Fix `FORMAT' statement parsing so negative values for specifiers
     such as `P' (e.g. `FORMAT(-1PF8.1)') are correctly processed as
     negative.

   * Fix `SIGNAL' intrinsic so it once again accepts a procedure as its
     second argument.

   * A temporary kludge option provides bare-bones information on
     `COMMON' and `EQUIVALENCE' members at debug time.

   * New `-fonetrip' option specifies FORTRAN-66-style one-trip `DO'
     loops.

   * New `-fno-silent' option causes names of program units to be
     printed as they are compiled, in a fashion similar to UNIX `f77'
     and `f2c'.

   * New `-fugly-assumed' option specifies that arrays dimensioned via
     `DIMENSION X(1)', for example, are to be treated as assumed-size.

   * New `-fno-typeless-boz' option specifies that non-decimal-radix
     constants using the prefixed-radix form (such as `Z'1234'') are to
     be interpreted as `INTEGER' constants.

   * New `-ff66' option is a "shorthand" option that specifies
     behaviors considered appropriate for FORTRAN 66 programs.

   * New `-ff77' option is a "shorthand" option that specifies
     behaviors considered appropriate for UNIX `f77' programs.

   * New `-fugly-comma' and `-fugly-logint' options provided to perform
     some of what `-fugly' used to do.  `-fugly' and `-fno-ugly' are
     now "shorthand" options, in that they do nothing more than enable
     (or disable) other `-fugly-*' options.

   * Fix parsing of assignment statements involving targets that are
     substrings of elements of `CHARACTER' arrays having names such as
     `READ', `WRITE', `GOTO', and `REALFUNCTIONFOO'.

   * Fix crashes involving diagnosed code.

   * Fix handling of local `EQUIVALENCE' areas so certain cases of
     valid Fortran programs are not misdiagnosed as improperly
     extending the area backwards.

   * Support `gcc' version 2.7.2.1.

   * Upgrade to `libf2c' as of 1996-09-26, and fix up some of the build
     procedures.

   * Change code generation for list-directed I/O so it allows for new
     versions of `libf2c' that might return non-zero status codes for
     some operations previously assumed to always return zero.

     This change not only affects how `IOSTAT=' variables are set by
     list-directed I/O, it also affects whether `END=' and `ERR='
     labels are reached by these operations.

   * Add intrinsic support for new `FTELL' and `FSEEK' procedures in
     `libf2c'.

   * Modify `fseek_()' in `libf2c' to be more portable (though, in
     practice, there might be no systems where this matters) and to
     catch invalid `whence' arguments.

   * Some useless warnings from the `-Wunused' option have been
     eliminated.

   * Fix a problem building the `f771' executable on AIX systems by
     linking with the `-bbigtoc' option.

   * Abort configuration if `gcc' has not been patched using the patch
     file provided in the `gcc/f/gbe/' subdirectory.

   * Add options `--help' and `--version' to the `g77' command, to
     conform to GNU coding guidelines.  Also add printing of `g77'
     version number when the `--verbose' (`-v') option is used.

   * Change internally generated name for local `EQUIVALENCE' areas to
     one based on the alphabetically sorted first name in the list of
     names for entities placed at the beginning of the areas.

   * Improvements to documentation and indexing.

In 0.5.18:
==========

   * Add some rudimentary support for `INTEGER*1', `INTEGER*2',
     `INTEGER*8', and their `LOGICAL' equivalents.  (This support works
     on most, maybe all, `gcc' targets.)

     Thanks to Scott Snyder (<snyder@d0sgif.fnal.gov>) for providing
     the patch for this!

     Among the missing elements from the support for these features are
     full intrinsic support and constants.

   * Add some rudimentary support for the `BYTE' and `WORD'
     type-declaration statements.  `BYTE' corresponds to `INTEGER*1',
     while `WORD' corresponds to `INTEGER*2'.

     Thanks to Scott Snyder (<snyder@d0sgif.fnal.gov>) for providing
     the patch for this!

   * The compiler code handling intrinsics has been largely rewritten
     to accommodate the new types.  No new intrinsics or arguments for
     existing intrinsics have been added, so there is, at this point,
     no intrinsic to convert to `INTEGER*8', for example.

   * Support automatic arrays in procedures.

   * Reduce space/time requirements for handling large *sparsely*
     initialized aggregate arrays.  This improvement applies to only a
     subset of the general problem to be addressed in 0.6.

   * Treat initial values of zero as if they weren't specified (in DATA
     and type-declaration statements).  The initial values will be set
     to zero anyway, but the amount of compile time processing them
     will be reduced, in some cases significantly (though, again, this
     is only a subset of the general problem to be addressed in 0.6).

     A new option, `-fzeros', is introduced to enable the traditional
     treatment of zeros as any other value.

   * With `-ff90' in force, `g77' incorrectly interpreted `REAL(Z)' as
     returning a `REAL' result, instead of as a `DOUBLE PRECISION'
     result.  (Here, `Z' is `DOUBLE COMPLEX'.)

     With `-fno-f90' in force, the interpretation remains unchanged,
     since this appears to be how at least some F77 code using the
     `DOUBLE COMPLEX' extension expected it to work.

     Essentially, `REAL(Z)' in F90 is the same as `DBLE(Z)', while in
     extended F77, it appears to be the same as `REAL(REAL(Z))'.

   * An expression involving exponentiation, where both operands were
     type `INTEGER' and the right-hand operand was negative, was
     erroneously evaluated.

   * Fix bugs involving `DATA' implied-`DO' constructs (these involved
     an errant diagnostic and a crash, both on good code, one involving
     subsequent statement-function definition).

   * Close `INCLUDE' files after processing them, so compiling source
     files with lots of `INCLUDE' statements does not result in being
     unable to open `INCLUDE' files after all the available file
     descriptors are used up.

   * Speed up compiling, especially of larger programs, and perhaps
     slightly reduce memory utilization while compiling (this is *not*
     the improvement planned for 0.6 involving large aggregate
     areas)--these improvements result from simply turning off some
     low-level code to do self-checking that hasn't been triggered in a
     long time.

   * Introduce three new options that implement optimizations in the
     `gcc' back end (GBE).  These options are `-fmove-all-movables',
     `-freduce-all-givs', and `-frerun-loop-opt', which are enabled, by
     default, for Fortran compilations.  These optimizations are
     intended to help toon Fortran programs.

   * Patch the GBE to do a better job optimizing certain kinds of
     references to array elements.

   * Due to patches to the GBE, the version number of `gcc' also is
     patched to make it easier to manage installations, especially
     useful if it turns out a `g77' change to the GBE has a bug.

     The `g77'-modified version number is the `gcc' version number with
     the string `.f.N' appended, where `f' identifies the version as
     enhanced for Fortran, and N is `1' for the first Fortran patch for
     that version of `gcc', `2' for the second, and so on.

     So, this introduces version 2.7.2.f.1 of `gcc'.

   * Make several improvements and fixes to diagnostics, including the
     removal of two that were inappropriate or inadequate.

   * Warning about two successive arithmetic operators, produced by
     `-Wsurprising', now produced *only* when both operators are,
     indeed, arithmetic (not relational/boolean).

   * `-Wsurprising' now warns about the remaining cases of using
     non-integral variables for implied-`DO' loops, instead of these
     being rejected unless `-fpedantic' or `-fugly' specified.

   * Allow `SAVE' of a local variable or array, even after it has been
     given an initial value via `DATA', for example.

   * Introduce an Info version of `g77' documentation, which supercedes
     `gcc/f/CREDITS', `gcc/f/DOC', and `gcc/f/PROJECTS'.  These files
     will be removed in a future release.  The files `gcc/f/BUGS',
     `gcc/f/INSTALL', and `gcc/f/NEWS' now are automatically built from
     the texinfo source when distributions are made.

     This effort was inspired by a first pass at translating
     `g77-0.5.16/f/DOC' that was contributed to Craig by David Ronis
     (<ronis@onsager.chem.mcgill.ca>).

   * New `-fno-second-underscore' option to specify that, when
     `-funderscoring' is in effect, a second underscore is not to be
     appended to Fortran names already containing an underscore.

   * Change the way iterative `DO' loops work to follow the F90
     standard.  In particular, calculation of the iteration count is
     still done by converting the start, end, and increment parameters
     to the type of the `DO' variable, but the result of the
     calculation is always converted to the default `INTEGER' type.

     (This should have no effect on existing code compiled by `g77',
     but code written to assume that use of a *wider* type for the `DO'
     variable will result in an iteration count being fully calculated
     using that wider type (wider than default `INTEGER') must be
     rewritten.)

   * Support `gcc' version 2.7.2.

   * Upgrade to `libf2c' as of 1996-03-23, and fix up some of the build
     procedures.

     Note that the email addresses related to `f2c' have changed--the
     distribution site now is named `netlib.bell-labs.com', and the
     maintainer's new address is <dmg@bell-labs.com>.

In 0.5.17:
==========

   * *Fix serious bug* in `g77 -v' command that can cause removal of a
     system's `/dev/null' special file if run by user `root'.

     *All users* of version 0.5.16 should ensure that they have not
     removed `/dev/null' or replaced it with an ordinary file (e.g. by
     comparing the output of `ls -l /dev/null' with `ls -l /dev/zero'.
     If the output isn't basically the same, contact your system
     administrator about restoring `/dev/null' to its proper status).

     This bug is particularly insidious because removing `/dev/null' as
     a special file can go undetected for quite a while, aside from
     various applications and programs exhibiting sudden, strange
     behaviors.

     I sincerely apologize for not realizing the implications of the
     fact that when `g77 -v' runs the `ld' command with `-o /dev/null'
     that `ld' tries to *remove* the executable it is supposed to build
     (especially if it reports unresolved references, which it should
     in this case)!

   * Fix crash on `CHARACTER*(*) FOO' in a main or block data program
     unit.

   * Fix crash that can occur when diagnostics given outside of any
     program unit (such as when input file contains `@foo').

   * Fix crashes, infinite loops (hangs), and such involving diagnosed
     code.

   * Fix `ASSIGN''ed variables so they can be `SAVE''d or dummy
     arguments, and issue clearer error message in cases where target
     of `ASSIGN' or `ASSIGN'ed `GOTO'/`FORMAT' is too small (which
     should never happen).

   * Make `libf2c' build procedures work on more systems again by
     eliminating unnecessary invocations of `ld -r -x' and `mv'.

   * Fix omission of `-funix-intrinsics-...' options in list of
     permitted options to compiler.

   * Fix failure to always diagnose missing type declaration for
     `IMPLICIT NONE'.

   * Fix compile-time performance problem (which could sometimes crash
     the compiler, cause a hang, or whatever, due to a bug in the back
     end) involving exponentiation with a large `INTEGER' constant for
     the right-hand operator (e.g. `I**32767').

   * Fix build procedures so cross-compiling `g77' (the `fini' utility
     in particular) is properly built using the host compiler.

   * Add new `-Wsurprising' option to warn about constructs that are
     interpreted by the Fortran standard (and `g77') in ways that are
     surprising to many programmers.

   * Add `ERF()' and `ERFC()' as generic intrinsics mapping to existing
     `ERF'/`DERF' and `ERFC'/`DERFC' specific intrinsics.

     *Note:* You should specify `INTRINSIC ERF,ERFC' in any code where
     you might use these as generic intrinsics, to improve likelihood
     of diagnostics (instead of subtle run-time bugs) when using a
     compiler that doesn't support these as intrinsics (e.g. `f2c').

   * Remove from `-fno-pedantic' the diagnostic about `DO' with
     non-`INTEGER' index variable; issue that under `-Wsurprising'
     instead.

   * Clarify some diagnostics that say things like "ignored" when that's
     misleading.

   * Clarify diagnostic on use of `.EQ.'/`.NE.' on `LOGICAL' operands.

   * Minor improvements to code generation for various operations on
     `LOGICAL' operands.

   * Minor improvement to code generation for some `DO' loops on some
     machines.

   * Support `gcc' version 2.7.1.

   * Upgrade to `libf2c' as of 1995-11-15.

In 0.5.16:
==========

   * Fix a code-generation bug involving complicated `EQUIVALENCE'
     statements not involving `COMMON'.

   * Fix code-generation bugs involving invoking "gratis" library
     procedures in `libf2c' from code compiled with `-fno-f2c' by
     making these procedures known to `g77' as intrinsics (not affected
     by -fno-f2c).  This is known to fix code invoking `ERF()',
     `ERFC()', `DERF()', and `DERFC()'.

   * Update `libf2c' to include netlib patches through 1995-08-16, and
     `#define' `WANT_LEAD_0' to 1 to make `g77'-compiled code more
     consistent with other Fortran implementations by outputting
     leading zeros in formatted and list-directed output.

   * Fix a code-generation bug involving adjustable dummy arrays with
     high bounds whose primaries are changed during procedure
     execution, and which might well improve code-generation
     performance for such arrays compared to `f2c' plus `gcc' (but
     apparently only when using `gcc-2.7.0' or later).

   * Fix a code-generation bug involving invocation of `COMPLEX' and
     `DOUBLE COMPLEX' `FUNCTION's and doing `COMPLEX' and `DOUBLE
     COMPLEX' divides, when the result of the invocation or divide is
     assigned directly to a variable that overlaps one or more of the
     arguments to the invocation or divide.

   * Fix crash by not generating new optimal code for `X**I' if `I' is
     nonconstant and the expression is used to dimension a dummy array,
     since the `gcc' back end does not support the necessary mechanics
     (and the `gcc' front end rejects the equivalent construct, as it
     turns out).

   * Fix crash on expressions like `COMPLEX**INTEGER'.

   * Fix crash on expressions like `(1D0,2D0)**2', i.e. raising a
     `DOUBLE COMPLEX' constant to an `INTEGER' constant power.

   * Fix crashes and such involving diagnosed code.

   * Diagnose, instead of crashing on, statement function definitions
     having duplicate dummy argument names.

   * Fix bug causing rejection of good code involving statement function
     definitions.

   * Fix bug resulting in debugger not knowing size of local equivalence
     area when any member of area has initial value (via `DATA', for
     example).

   * Fix installation bug that prevented installation of `g77' driver.
     Provide for easy selection of whether to install copy of `g77' as
     `f77' to replace the broken code.

   * Fix `gcc' driver (affects `g77' thereby) to not gratuitously
     invoke the `f771' program (e.g. when `-E' is specified).

   * Fix diagnostic to point to correct source line when it immediately
     follows an `INCLUDE' statement.

   * Support more compiler options in `gcc'/`g77' when compiling
     Fortran files.  These options include `-p', `-pg', `-aux-info',
     `-P', correct setting of version-number macros for preprocessing,
     full recognition of `-O0', and automatic insertion of
     configuration-specific linker specs.

   * Add new intrinsics that interface to existing routines in `libf2c':
     `ABORT', `DERF', `DERFC', `ERF', `ERFC', `EXIT', `FLUSH',
     `GETARG', `GETENV', `IARGC', `SIGNAL', and `SYSTEM'.  Note that
     `ABORT', `EXIT', `FLUSH', `SIGNAL', and `SYSTEM' are intrinsic
     subroutines, not functions (since they have side effects), so to
     get the return values from `SIGNAL' and `SYSTEM', append a final
     argument specifying an `INTEGER' variable or array element (e.g.
     `CALL SYSTEM('rm foo',ISTAT)').

   * Add new intrinsic group named `unix' to contain the new intrinsics,
     and by default enable this new group.

   * Move `LOC()' intrinsic out of the `vxt' group to the new `unix'
     group.

   * Improve `g77' so that `g77 -v' by itself (or with certain other
     options, including `-B', `-b', `-i', `-nostdlib', and `-V')
     reports lots more useful version info, and so that long-form
     options `gcc' accepts are understood by `g77' as well (even in
     truncated, unambiguous forms).

   * Add new `g77' option `--driver=name' to specify driver when
     default, `gcc', isn't appropriate.

   * Add support for `#' directives (as output by the preprocessor) in
     the compiler, and enable generation of those directives by the
     preprocessor (when compiling `.F' files) so diagnostics and
     debugging info are more useful to users of the preprocessor.

   * Produce better diagnostics, more like `gcc', with info such as `In
     function `foo':' and `In file included from...:'.

   * Support `gcc''s `-fident' and `-fno-ident' options.

   * When `-Wunused' in effect, don't warn about local variables used as
     statement-function dummy arguments or `DATA' implied-`DO' iteration
     variables, even though, strictly speaking, these are not uses of
     the variables themselves.

   * When `-W -Wunused' in effect, don't warn about unused dummy
     arguments at all, since there's no way to turn this off for
     individual cases (`g77' might someday start warning about
     these)--applies to `gcc' versions 2.7.0 and later, since earlier
     versions didn't warn about unused dummy arguments.

   * New option `-fno-underscoring' that inhibits transformation of
     names (by appending one or two underscores) so users may experiment
     with implications of such an environment.

   * Minor improvement to `gcc/f/info' module to make it easier to build
     `g77' using the native (non-`gcc') compiler on certain machines
     (but definitely not all machines nor all non-`gcc' compilers).
     Please do not report bugs showing problems compilers have with
     macros defined in `gcc/f/target.h' and used in places like
     `gcc/f/expr.c'.

   * Add warning to be printed for each invocation of the compiler if
     the target machine `INTEGER', `REAL', or `LOGICAL' size is not 32
     bits, since `g77' is known to not work well for such cases (to be
     fixed in Version 0.6--*note Actual Bugs We Haven't Fixed Yet:
     Actual Bugs.).

   * Lots of new documentation (though work is still needed to put it
     into canonical GNU format).

   * Build `libf2c' with `-g0', not `-g2', in effect (by default), to
     produce smaller library without lots of debugging clutter.

In 0.5.15:
==========

   * Fix bad code generation involving `X**I' and temporary, internal
     variables generated by `g77' and the back end (such as for `DO'
     loops).

   * Fix crash given `CHARACTER A;DATA A/.TRUE./'.

   * Replace crash with diagnostic given `CHARACTER A;DATA A/1.0/'.

   * Fix crash or other erratic behavior when null character constant
     (`''') is encountered.

   * Fix crash or other erratic behavior involving diagnosed code.

   * Fix code generation for external functions returning type `REAL'
     when the `-ff2c' option is in force (which it is by default) so
     that `f2c' compatibility is indeed provided.

   * Disallow `COMMON I(10)' if `I' has previously been specified with
     an array declarator.

   * New `-ffixed-line-length-N' option, where N is the maximum length
     of a typical fixed-form line, defaulting to 72 columns, such that
     characters beyond column N are ignored, or N is `none', meaning no
     characters are ignored.  does not affect lines with `&' in column
     1, which are always processed as if `-ffixed-line-length-none' was
     in effect.

   * No longer generate better code for some kinds of array references,
     as `gcc' back end is to be fixed to do this even better, and it
     turned out to slow down some code in some cases after all.

   * In `COMMON' and `EQUIVALENCE' areas with any members given initial
     values (e.g. via `DATA'), uninitialized members now always
     initialized to binary zeros (though this is not required by the
     standard, and might not be done in future versions of `g77').
     Previously, in some `COMMON'/`EQUIVALENCE' areas (essentially
     those with members of more than one type), the uninitialized
     members were initialized to spaces, to cater to `CHARACTER' types,
     but it seems no existing code expects that, while much existing
     code expects binary zeros.

In 0.5.14:
==========

   * Don't emit bad code when low bound of adjustable array is
     nonconstant and thus might vary as an expression at run time.

   * Emit correct code for calculation of number of trips in `DO' loops
     for cases where the loop should not execute at all.  (This bug
     affected cases where the difference between the begin and end
     values was less than the step count, though probably not for
     floating-point cases.)

   * Fix crash when extra parentheses surround item in `DATA'
     implied-`DO' list.

   * Fix crash over minor internal inconsistencies in handling
     diagnostics, just substitute dummy strings where necessary.

   * Fix crash on some systems when compiling call to `MVBITS()'
     intrinsic.

   * Fix crash on array assignment `TYPEDDD(...)=...', where DDD is a
     string of one or more digits.

   * Fix crash on `DCMPLX()' with a single `INTEGER' argument.

   * Fix various crashes involving code with diagnosed errors.

   * Support `-I' option for `INCLUDE' statement, plus `gcc''s
     `header.gcc' facility for handling systems like MS-DOS.

   * Allow `INCLUDE' statement to be continued across multiple lines,
     even allow it to coexist with other statements on the same line.

   * Incorporate Bellcore fixes to `libf2c' through 1995-03-15--this
     fixes a bug involving infinite loops reading EOF with empty
     list-directed I/O list.

   * Remove all the `g77'-specific auto-configuration scripts, code,
     and so on, except for temporary substitutes for bsearch() and
     strtoul(), as too many configure/build problems were reported in
     these areas.  People will have to fix their systems' problems
     themselves, or at least somewhere other than `g77', which expects
     a working ANSI C environment (and, for now, a GNU C compiler to
     compile `g77' itself).

   * Complain if initialized common redeclared as larger in subsequent
     program unit.

   * Warn if blank common initialized, since its size can vary and hence
     related warnings that might be helpful won't be seen.

   * New `-fbackslash' option, on by default, that causes `\' within
     `CHARACTER' and Hollerith constants to be interpreted a la GNU C.
     Note that this behavior is somewhat different from `f2c''s, which
     supports only a limited subset of backslash (escape) sequences.

   * Make `-fugly-args' the default.

   * New `-fugly-init' option, on by default, that allows
     typeless/Hollerith to be specified as initial values for variables
     or named constants (`PARAMETER'), and also allows
     character<->numeric conversion in those contexts--turn off via
     `-fno-ugly-init'.

   * New `-finit-local-zero' option to initialize local variables to
     binary zeros.  This does not affect whether they are `SAVE'd, i.e.
     made automatic or static.

   * New `-Wimplicit' option to warn about implicitly typed variables,
     arrays, and functions.  (Basically causes all program units to
     default to `IMPLICIT NONE'.)

   * `-Wall' now implies `-Wuninitialized' as with `gcc' (i.e. unless
     `-O' not specified, since `-Wuninitialized' requires `-O'), and
     implies `-Wunused' as well.

   * `-Wunused' no longer gives spurious messages for unused `EXTERNAL'
     names (since they are assumed to refer to block data program
     units, to make use of libraries more reliable).

   * Support `%LOC()' and `LOC()' of character arguments.

   * Support null (zero-length) character constants and expressions.

   * Support `f2c''s `IMAG()' generic intrinsic.

   * Support `ICHAR()', `IACHAR()', and `LEN()' of character
     expressions that are valid in assignments but not normally as
     actual arguments.

   * Support `f2c'-style `&' in column 1 to mean continuation line.

   * Allow `NAMELIST', `EXTERNAL', `INTRINSIC', and `VOLATILE' in
     `BLOCK DATA', even though these are not allowed by the standard.

   * Allow `RETURN' in main program unit.

   * Changes to Hollerith-constant support to obey Appendix C of the
     standard:

        - Now padded on the right with zeros, not spaces.

        - Hollerith "format specifications" in the form of arrays of
          non-character allowed.

        - Warnings issued when non-space truncation occurs when
          converting to another type.

        - When specified as actual argument, now passed by reference to
          `INTEGER' (padded on right with spaces if constant too small,
          otherwise fully intact if constant wider the `INTEGER' type)
          instead of by value.

     *Warning:* `f2c' differs on the interpretation of `CALL FOO(1HX)',
     which it treats exactly the same as `CALL FOO('X')', but which the
     standard and `g77' treat as `CALL FOO(%REF('X   '))' (padded with
     as many spaces as necessary to widen to `INTEGER'), essentially.

   * Changes and fixes to typeless-constant support:

        - Now treated as a typeless double-length `INTEGER' value.

        - Warnings issued when overflow occurs.

        - Padded on the left with zeros when converting to a larger
          type.

        - Should be properly aligned and ordered on the target machine
          for whatever type it is turned into.

        - When specified as actual argument, now passed as reference to
          a default `INTEGER' constant.

   * `%DESCR()' of a non-`CHARACTER' expression now passes a pointer to
     the expression plus a length for the expression just as if it were
     a `CHARACTER' expression.  For example, `CALL FOO(%DESCR(D))',
     where `D' is `REAL*8', is the same as `CALL FOO(D,%VAL(8)))'.

   * Name of multi-entrypoint master function changed to incorporate
     the name of the primary entry point instead of a decimal value, so
     the name of the master function for `SUBROUTINE X' with alternate
     entry points is now `__g77_masterfun_x'.

   * Remove redundant message about zero-step-count `DO' loops.

   * Clean up diagnostic messages, shortening many of them.

   * Fix typo in `g77' man page.

   * Clarify implications of constant-handling bugs in `f/BUGS'.

   * Generate better code for `**' operator with a right-hand operand of
     type `INTEGER'.

   * Generate better code for `SQRT()' and `DSQRT()', also when
     `-ffast-math' specified, enable better code generation for `SIN()'
     and `COS()'.

   * Generate better code for some kinds of array references.

   * Speed up lexing somewhat (this makes the compilation phase
     noticeably faster).


File: g77.info,  Node: Changes,  Next: Language,  Prev: News,  Up: Top

User-visible Changes
********************

   This section describes changes to `g77' that are visible to the
programmers who actually write and maintain Fortran code they compile
with `g77'.  Information on changes to installation procedures, changes
to the documentation, and bug fixes is not provided here, unless it is
likely to affect how users use `g77'.  *Note News About GNU Fortran:
News, for information on such changes to `g77'.

   To find out about existing bugs and ongoing plans for GNU Fortran,
retrieve `ftp://alpha.gnu.org/g77.plan' or, if you cannot do that, email
<fortran@gnu.org> asking for a recent copy of the GNU Fortran `.plan'
file.

In 0.5.21:
==========

   * When the `-W' option is specified, `gcc', `g77', and other GNU
     compilers that incorporate the `gcc' back end as modified by
     `g77', issue a warning about integer division by constant zero.

   * New option `-Wno-globals' disables warnings about "suspicious" use
     of a name both as a global name and as the implicit name of an
     intrinsic, and warnings about disagreements over the number or
     natures of arguments passed to global procedures, or the natures
     of the procedures themselves.

     The default is to issue such warnings, which are new as of this
     version of `g77'.

   * New option `-fno-globals' disables diagnostics about potentially
     fatal disagreements analysis problems, such as disagreements over
     the number or natures of arguments passed to global procedures, or
     the natures of those procedures themselves.

     The default is to issue such diagnostics and flag the compilation
     as unsuccessful.  With this option, the diagnostics are issued as
     warnings, or, if `-Wno-globals' is specified, are not issued at
     all.

     This option also disables inlining of global procedures, to avoid
     compiler crashes resulting from coding errors that these
     diagnostics normally would identify.

   * Fix `libU77' routines that accept file names to strip trailing
     spaces from them, for consistency with other implementations.

   * Fix `SIGNAL' intrinsic so it accepts an optional third `Status'
     argument.

   * Make many changes to `libU77' intrinsics to support existing code
     more directly.

     Such changes include allowing both subroutine and function forms
     of many routines, changing `MCLOCK()' and `TIME()' to return
     `INTEGER(KIND=1)' values, introducing `MCLOCK8()' and `TIME8()' to
     return `INTEGER(KIND=2)' values, and placing functions that are
     intended to perform side effects in a new intrinsic group,
     `badu77'.

   * Add options `-fbadu77-intrinsics-delete',
     `-fbadu77-intrinsics-hide', and so on.

   * Add `INT2' and `INT8' intrinsics.

   * Add `CPU_TIME' intrinsic.

   * `CTIME' intrinsic now accepts any `INTEGER' argument, not just
     `INTEGER(KIND=2)'.

In 0.5.20:
==========

   * The `-fno-typeless-boz' option is now the default.

     This option specifies that non-decimal-radix constants using the
     prefixed-radix form (such as `Z'1234'') are to be interpreted as
     `INTEGER(KIND=1)' constants.  Specify `-ftypeless-boz' to cause
     such constants to be interpreted as typeless.

     (Version 0.5.19 introduced `-fno-typeless-boz' and its inverse.)

     *Note Options Controlling Fortran Dialect: Fortran Dialect Options,
     for information on the `-ftypeless-boz' option.

   * Options `-ff90-intrinsics-enable' and `-fvxt-intrinsics-enable'
     now are the defaults.

     Some programs might use names that clash with intrinsic names
     defined (and now enabled) by these options or by the new `libU77'
     intrinsics.  Users of such programs might need to compile them
     differently (using, for example, `-ff90-intrinsics-disable') or,
     better yet, insert appropriate `EXTERNAL' statements specifying
     that these names are not intended to be names of intrinsics.

   * The `ALWAYS_FLUSH' macro is no longer defined when building
     `libf2c', which should result in improved I/O performance,
     especially over NFS.

     *Note:* If you have code that depends on the behavior of `libf2c'
     when built with `ALWAYS_FLUSH' defined, you will have to modify
     `libf2c' accordingly before building it from this and future
     versions of `g77'.

     *Note Output Assumed To Flush::, for more information.

   * Dave Love's implementation of `libU77' has been added to the
     version of `libf2c' distributed with and built by `g77'.  `g77'
     now knows about the routines in this library as intrinsics.

   * New option `-fvxt' specifies that the source file is written in
     VXT Fortran, instead of GNU Fortran.

     *Note VXT Fortran::, for more information on the constructs
     recognized when the `-fvxt' option is specified.

   * The `-fvxt-not-f90' option has been deleted, along with its
     inverse, `-ff90-not-vxt'.

     If you used one of these deleted options, you should re-read the
     pertinent documentation to determine which options, if any, are
     appropriate for compiling your code with this version of `g77'.

     *Note Other Dialects::, for more information.

   * The `-fugly' option now issues a warning, as it likely will be
     removed in a future version.

     (Enabling all the `-fugly-*' options is unlikely to be feasible,
     or sensible, in the future, so users should learn to specify only
     those `-fugly-*' options they really need for a particular source
     file.)

   * The `-fugly-assumed' option, introduced in version 0.5.19, has
     been changed to better accommodate old and new code.  *Note Ugly
     Assumed-Size Arrays::, for more information.

   * Related to supporting Alpha (AXP) machines, the `LOC()' intrinsic
     and `%LOC()' construct now return values of `INTEGER(KIND=0)' type,
     as defined by the GNU Fortran language.

     This type is wide enough (holds the same number of bits) as the
     character-pointer type on the machine.

     On most systems, this won't make a noticable difference, whereas
     on Alphas and other systems with 64-bit pointers, the
     `INTEGER(KIND=0)' type is equivalent to `INTEGER(KIND=2)' (often
     referred to as `INTEGER*8') instead of the more common
     `INTEGER(KIND=1)' (often referred to as `INTEGER*4').

   * Emulate `COMPLEX' arithmetic in the `g77' front end, to avoid bugs
     in `complex' support in the `gcc' back end.  New option
     `-fno-emulate-complex' causes `g77' to revert the 0.5.19 behavior.

   * Dummy arguments are no longer assumed to potentially alias
     (overlap) other dummy arguments or `COMMON' areas when any of
     these are defined (assigned to) by Fortran code.

     This can result in faster and/or smaller programs when compiling
     with optimization enabled, though on some systems this effect is
     observed only when `-fforce-addr' also is specified.

     New options `-falias-check', `-fargument-alias',
     `-fargument-noalias', and `-fno-argument-noalias-global' control
     the way `g77' handles potential aliasing.

     *Note Aliasing Assumed To Work::, for detailed information on why
     the new defaults might result in some programs no longer working
     the way they did when compiled by previous versions of `g77'.

   * New option `-fugly-assign' specifies that the same memory
     locations are to be used to hold the values assigned by both
     statements `I = 3' and `ASSIGN 10 TO I', for example.  (Normally,
     `g77' uses a separate memory location to hold assigned statement
     labels.)

     *Note Ugly Assigned Labels::, for more information.

   * `FORMAT' and `ENTRY' statements now are allowed to precede
     `IMPLICIT NONE' statements.

   * Enable full support of `INTEGER(KIND=2)' (often referred to as
     `INTEGER*8') available in `libf2c' and `f2c.h' so that `f2c' users
     may make full use of its features via the `g77' version of `f2c.h'
     and the `INTEGER(KIND=2)' support routines in the `g77' version of
     `libf2c'.

   * Improve `g77' driver and `libf2c' so that `g77 -v' yields version
     information on the library.

   * The `SNGL' and `FLOAT' intrinsics now are specific intrinsics,
     instead of synonyms for the generic intrinsic `REAL'.

   * New intrinsics have been added.  These are `REALPART', `IMAGPART',
     `COMPLEX', `LONG', and `SHORT'.

   * A new group of intrinsics, `gnu', has been added to contain the
     new `REALPART', `IMAGPART', and `COMPLEX' intrinsics.  An old
     group, `dcp', has been removed.

In 0.5.19:
==========

   * A temporary kludge option provides bare-bones information on
     `COMMON' and `EQUIVALENCE' members at debug time.  *Note Options
     for Code Generation Conventions: Code Gen Options, for information
     on the `-fdebug-kludge' option.

   * New `-fonetrip' option specifies FORTRAN-66-style one-trip `DO'
     loops.

   * New `-fno-silent' option causes names of program units to be
     printed as they are compiled, in a fashion similar to UNIX `f77'
     and `f2c'.

   * New `-fugly-assumed' option specifies that arrays dimensioned via
     `DIMENSION X(1)', for example, are to be treated as assumed-size.

   * New `-fno-typeless-boz' option specifies that non-decimal-radix
     constants using the prefixed-radix form (such as `Z'1234'') are to
     be interpreted as `INTEGER(KIND=1)' constants.

   * New `-ff66' option is a "shorthand" option that specifies
     behaviors considered appropriate for FORTRAN 66 programs.

   * New `-ff77' option is a "shorthand" option that specifies
     behaviors considered appropriate for UNIX `f77' programs.

   * New `-fugly-comma' and `-fugly-logint' options provided to perform
     some of what `-fugly' used to do.  `-fugly' and `-fno-ugly' are
     now "shorthand" options, in that they do nothing more than enable
     (or disable) other `-fugly-*' options.

   * Change code generation for list-directed I/O so it allows for new
     versions of `libf2c' that might return non-zero status codes for
     some operations previously assumed to always return zero.

     This change not only affects how `IOSTAT=' variables are set by
     list-directed I/O, it also affects whether `END=' and `ERR='
     labels are reached by these operations.

   * Add intrinsic support for new `FTELL' and `FSEEK' procedures in
     `libf2c'.

   * Add options `--help' and `--version' to the `g77' command, to
     conform to GNU coding guidelines.  Also add printing of `g77'
     version number when the `--verbose' (`-v') option is used.

In 0.5.18:
==========

   * The `BYTE' and `WORD' statements now are supported, to a limited
     extent.

   * `INTEGER*1', `INTEGER*2', `INTEGER*8', and their `LOGICAL'
     equivalents, now are supported to a limited extent.  Among the
     missing elements are complete intrinsic and constant support.

   * Support automatic arrays in procedures.  For example, `REAL A(N)',
     where `A' is not a dummy argument, specifies that `A' is an
     automatic array.  The size of `A' is calculated from the value of
     `N' each time the procedure is called, that amount of space is
     allocated, and that space is freed when the procedure returns to
     its caller.

   * Add `-fno-zeros' option, enabled by default, to reduce
     compile-time CPU and memory usage for code that provides initial
     zero values for variables and arrays.

   * Introduce three new options that apply to all compilations by
     `g77'-aware GNU compilers--`-fmove-all-movables',
     `-freduce-all-givs', and `-frerun-loop-opt'--which can improve the
     run-time performance of some programs.

   * Replace much of the existing documentation with a single Info
     document.

   * New option `-fno-second-underscore'.

In 0.5.17:
==========

   * The `ERF()' and `ERFC()' intrinsics now are generic intrinsics,
     mapping to `ERF'/`DERF' and `ERFC'/`DERFC', respectively.  *Note:*
     Use `INTRINSIC ERF,ERFC' in any code that might reference these as
     generic intrinsics, to improve the likelihood of diagnostics
     (instead of subtle run-time bugs) when using compilers that don't
     support these as intrinsics.

   * New option `-Wsurprising'.

   * DO loops with non-`INTEGER' variables now diagnosed only when
     `-Wsurprising' specified.  Previously, this was diagnosed *unless*
     `-fpedantic' or `-fugly' was specified.

In 0.5.16:
==========

   * `libf2c' changed to output a leading zero (0) digit for
     floating-point values output via list-directed and formatted
     output (to bring `g77' more into line with many existing Fortran
     implementations--the ANSI FORTRAN 77 standard leaves this choice
     to the implementation).

   * `libf2c' no longer built with debugging information intact, making
     it much smaller.

   * Automatic installation of the `g77' command now works.

   * Diagnostic messages now more informative, a la `gcc', including
     messages like `In function `foo':' and `In file included from...:'.

   * New group of intrinsics called `unix', including `ABORT', `DERF',
     `DERFC', `ERF', `ERFC', `EXIT', `FLUSH', `GETARG', `GETENV',
     `SIGNAL', and `SYSTEM'.

   * `-funix-intrinsics-{delete,hide,disable,enable}' options added.

   * `-fno-underscoring' option added.

   * `--driver' option added to the `g77' command.

   * Support for the `gcc' options `-fident' and `-fno-ident' added.

   * `g77 -v' returns much more version info, making the submission of
     better bug reports easily.

   * Many improvements to the `g77' command to better fulfill its role
     as a front-end to the `gcc' driver.  For example, `g77' now
     recognizes `--verbose' as a verbose way of specifying `-v'.

   * Compiling preprocessed (`*.F' and `*.fpp') files now results in
     better diagnostics and debugging information, as the
     source-location info now is passed all the way through the
     compilation process instead of being lost.


File: g77.info,  Node: Language,  Next: Compiler,  Prev: Changes,  Up: Top

The GNU Fortran Language
************************

   GNU Fortran supports a variety of extensions to, and dialects of,
the Fortran language.  Its primary base is the ANSI FORTRAN 77
standard, currently available on the network at
`http://kumo.swcp.com/fortran/F77_std/f77_std.html' or in
`ftp://ftp.ast.cam.ac.uk/pub/michael/'.  It offers some extensions that
are popular among users of UNIX `f77' and `f2c' compilers, some that
are popular among users of other compilers (such as Digital products),
some that are popular among users of the newer Fortran 90 standard, and
some that are introduced by GNU Fortran.

   (If you need a text on Fortran, a few freely available electronic
references have pointers from `http://www.fortran.com/fortran/Books/'.)

   Part of what defines a particular implementation of a Fortran
system, such as `g77', is the particular characteristics of how it
supports types, constants, and so on.  Much of this is left up to the
implementation by the various Fortran standards and accepted practice
in the industry.

   The GNU Fortran *language* is described below.  Much of the material
is organized along the same lines as the ANSI FORTRAN 77 standard
itself.

   *Note Other Dialects::, for information on features `g77' supports
that are not part of the GNU Fortran language.

   *Note*: This portion of the documentation definitely needs a lot of
work!

* Menu:

Relationship to the ANSI FORTRAN 77 standard:
* Direction of Language Development::  Where GNU Fortran is headed.
* Standard Support::  Degree of support for the standard.

Extensions to the ANSI FORTRAN 77 standard:
* Conformance::
* Notation Used::
* Terms and Concepts::
* Characters Lines Sequence::
* Data Types and Constants::
* Expressions::
* Specification Statements::
* Control Statements::
* Functions and Subroutines::
* Scope and Classes of Names::


File: g77.info,  Node: Direction of Language Development,  Next: Standard Support,  Up: Language

Direction of Language Development
=================================

   The purpose of the following description of the GNU Fortran language
is to promote wide portability of GNU Fortran programs.

   GNU Fortran is an evolving language, due to the fact that `g77'
itself is in beta test.  Some current features of the language might
later be redefined as dialects of Fortran supported by `g77' when
better ways to express these features are added to `g77', for example.
Such features would still be supported by `g77', but would be available
only when one or more command-line options were used.

   The GNU Fortran *language* is distinct from the GNU Fortran
*compilation system* (`g77').

   For example, `g77' supports various dialects of Fortran--in a sense,
these are languages other than GNU Fortran--though its primary purpose
is to support the GNU Fortran language, which also is described in its
documentation and by its implementation.

   On the other hand, non-GNU compilers might offer support for the GNU
Fortran language, and are encouraged to do so.

   Currently, the GNU Fortran language is a fairly fuzzy object.  It
represents something of a cross between what `g77' accepts when
compiling using the prevailing defaults and what this document
describes as being part of the language.

   Future versions of `g77' are expected to clarify the definition of
the language in the documentation.  Often, this will mean adding new
features to the language, in the form of both new documentation and new
support in `g77'.  However, it might occasionally mean removing a
feature from the language itself to "dialect" status.  In such a case,
the documentation would be adjusted to reflect the change, and `g77'
itself would likely be changed to require one or more command-line
options to continue supporting the feature.

   The development of the GNU Fortran language is intended to strike a
balance between:

   * Serving as a mostly-upwards-compatible language from the de facto
     UNIX Fortran dialect as supported by `f77'.

   * Offering new, well-designed language features.  Attributes of such
     features include not making existing code any harder to read (for
     those who might be unaware that the new features are not in use)
     and not making state-of-the-art compilers take longer to issue
     diagnostics, among others.

   * Supporting existing, well-written code without gratuitously
     rejecting non-standard constructs, regardless of the origin of the
     code (its dialect).

   * Offering default behavior and command-line options to reduce and,
     where reasonable, eliminate the need for programmers to make any
     modifications to code that already works in existing production
     environments.

   * Diagnosing constructs that have different meanings in different
     systems, languages, and dialects, while offering clear, less
     ambiguous ways to express each of the different meanings so
     programmers can change their code appropriately.

   One of the biggest practical challenges for the developers of the
GNU Fortran language is meeting the sometimes contradictory demands of
the above items.

   For example, a feature might be widely used in one popular
environment, but the exact same code that utilizes that feature might
not work as expected--perhaps it might mean something entirely
different--in another popular environment.

   Traditionally, Fortran compilers--even portable ones--have solved
this problem by simply offering the appropriate feature to users of the
respective systems.  This approach treats users of various Fortran
systems and dialects as remote "islands", or camps, of programmers, and
assume that these camps rarely come into contact with each other (or,
especially, with each other's code).

   Project GNU takes a radically different approach to software and
language design, in that it assumes that users of GNU software do not
necessarily care what kind of underlying system they are using,
regardless of whether they are using software (at the user-interface
level) or writing it (for example, writing Fortran or C code).

   As such, GNU users rarely need consider just what kind of underlying
hardware (or, in many cases, operating system) they are using at any
particular time.  They can use and write software designed for a
general-purpose, widely portable, heteregenous environment--the GNU
environment.

   In line with this philosophy, GNU Fortran must evolve into a product
that is widely ported and portable not only in the sense that it can be
successfully built, installed, and run by users, but in the larger
sense that its users can use it in the same way, and expect largely the
same behaviors from it, regardless of the kind of system they are using
at any particular time.

   This approach constrains the solutions `g77' can use to resolve
conflicts between various camps of Fortran users.  If these two camps
disagree about what a particular construct should mean, `g77' cannot
simply be changed to treat that particular construct as having one
meaning without comment (such as a warning), lest the users expecting
it to have the other meaning are unpleasantly surprised that their code
misbehaves when executed.

   The use of the ASCII backslash character in character constants is
an excellent (and still somewhat unresolved) example of this kind of
controversy.  *Note Backslash in Constants::.  Other examples are
likely to arise in the future, as `g77' developers strive to improve
its ability to accept an ever-wider variety of existing Fortran code
without requiring significant modifications to said code.

   Development of GNU Fortran is further constrained by the desire to
avoid requiring programmers to change their code.  This is important
because it allows programmers, administrators, and others to more
faithfully evaluate and validate `g77' (as an overall product and as
new versions are distributed) without having to support multiple
versions of their programs so that they continue to work the same way
on their existing systems (non-GNU perhaps, but possibly also earlier
versions of `g77').


File: g77.info,  Node: Standard Support,  Next: Conformance,  Prev: Direction of Language Development,  Up: Language

ANSI FORTRAN 77 Standard Support
================================

   GNU Fortran supports ANSI FORTRAN 77 with the following caveats.  In
summary, the only ANSI FORTRAN 77 features `g77' doesn't support are
those that are probably rarely used in actual code, some of which are
explicitly disallowed by the Fortran 90 standard.

* Menu:

* No Passing External Assumed-length::  CHAR*(*) CFUNC restriction.
* No Passing Dummy Assumed-length::     CHAR*(*) CFUNC restriction.
* No Pathological Implied-DO::          No `((..., I=...), I=...)'.
* No Useless Implied-DO::               No `(A, I=1, 1)'.


File: g77.info,  Node: No Passing External Assumed-length,  Next: No Passing Dummy Assumed-length,  Up: Standard Support

No Passing External Assumed-length
----------------------------------

   `g77' disallows passing of an external procedure as an actual
argument if the procedure's type is declared `CHARACTER*(*)'.  For
example:

     CHARACTER*(*) CFUNC
     EXTERNAL CFUNC
     CALL FOO(CFUNC)
     END

It isn't clear whether the standard considers this conforming.


File: g77.info,  Node: No Passing Dummy Assumed-length,  Next: No Pathological Implied-DO,  Prev: No Passing External Assumed-length,  Up: Standard Support

No Passing Dummy Assumed-length
-------------------------------

   `g77' disallows passing of a dummy procedure as an actual argument
if the procedure's type is declared `CHARACTER*(*)'.

     SUBROUTINE BAR(CFUNC)
     CHARACTER*(*) CFUNC
     EXTERNAL CFUNC
     CALL FOO(CFUNC)
     END

It isn't clear whether the standard considers this conforming.


File: g77.info,  Node: No Pathological Implied-DO,  Next: No Useless Implied-DO,  Prev: No Passing Dummy Assumed-length,  Up: Standard Support

No Pathological Implied-DO
--------------------------

   The `DO' variable for an implied-`DO' construct in a `DATA'
statement may not be used as the `DO' variable for an outer
implied-`DO' construct.  For example, this fragment is disallowed by
`g77':

     DATA ((A(I, I), I= 1, 10), I= 1, 10) /.../

This also is disallowed by Fortran 90, as it offers no additional
capabilities and would have a variety of possible meanings.

   Note that it is *very* unlikely that any production Fortran code
tries to use this unsupported construct.


File: g77.info,  Node: No Useless Implied-DO,  Prev: No Pathological Implied-DO,  Up: Standard Support

No Useless Implied-DO
---------------------

   An array element initializer in an implied-`DO' construct in a
`DATA' statement must contain at least one reference to the `DO'
variables of each outer implied-`DO' construct.  For example, this
fragment is disallowed by `g77':

     DATA (A, I= 1, 1) /1./

This also is disallowed by Fortran 90, as FORTRAN 77's more permissive
requirements offer no additional capabilities.  However, `g77' doesn't
necessarily diagnose all cases where this requirement is not met.

   Note that it is *very* unlikely that any production Fortran code
tries to use this unsupported construct.


File: g77.info,  Node: Conformance,  Next: Notation Used,  Prev: Standard Support,  Up: Language

Conformance
===========

   (The following information augments or overrides the information in
Section 1.4 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 1 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   The definition of the GNU Fortran language is akin to that of the
ANSI FORTRAN 77 language in that it does not generally require
conforming implementations to diagnose cases where programs do not
conform to the language.

   However, `g77' as a compiler is being developed in a way that is
intended to enable it to diagnose such cases in an easy-to-understand
manner.

   A program that conforms to the GNU Fortran language should, when
compiled, linked, and executed using a properly installed `g77' system,
perform as described by the GNU Fortran language definition.  Reasons
for different behavior include, among others:

   * Use of resources (memory--heap, stack, and so on; disk space; CPU
     time; etc.) exceeds those of the system.

   * Range and/or precision of calculations required by the program
     exceeds that of the system.

   * Excessive reliance on behaviors that are system-dependent
     (non-portable Fortran code).

   * Bugs in the program.

   * Bug in `g77'.

   * Bugs in the system.

   Despite these "loopholes", the availability of a clear specification
of the language of programs submitted to `g77', as this document is
intended to provide, is considered an important aspect of providing a
robust, clean, predictable Fortran implementation.

   The definition of the GNU Fortran language, while having no special
legal status, can therefore be viewed as a sort of contract, or
agreement.  This agreement says, in essence, "if you write a program in
this language, and run it in an environment (such as a `g77' system)
that supports this language, the program should behave in a largely
predictable way".


File: g77.info,  Node: Notation Used,  Next: Terms and Concepts,  Prev: Conformance,  Up: Language

Notation Used in This Chapter
=============================

   (The following information augments or overrides the information in
Section 1.5 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 1 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   In this chapter, "must" denotes a requirement, "may" denotes
permission, and "must not" and "may not" denote prohibition.  Terms
such as "might", "should", and "can" generally add little or nothing in
the way of weight to the GNU Fortran language itself, but are used to
explain or illustrate the language.

   For example:

     ``The `FROBNITZ' statement must precede all executable
     statements in a program unit, and may not specify any dummy
     arguments.  It may specify local or common variables and arrays.
     Its use should be limited to portions of the program designed to
     be non-portable and system-specific, because it might cause the
     containing program unit to behave quite differently on different
     systems.''

   Insofar as the GNU Fortran language is specified, the requirements
and permissions denoted by the above sample statement are limited to
the placement of the statement and the kinds of things it may specify.
The rest of the statement--the content regarding non-portable portions
of the program and the differing behavior of program units containing
the `FROBNITZ' statement--does not pertain the GNU Fortran language
itself.  That content offers advice and warnings about the `FROBNITZ'
statement.

   *Remember:* The GNU Fortran language definition specifies both what
constitutes a valid GNU Fortran program and how, given such a program,
a valid GNU Fortran implementation is to interpret that program.

   It is *not* incumbent upon a valid GNU Fortran implementation to
behave in any particular way, any consistent way, or any predictable
way when it is asked to interpret input that is *not* a valid GNU
Fortran program.

   Such input is said to have "undefined" behavior when interpreted by
a valid GNU Fortran implementation, though an implementation may choose
to specify behaviors for some cases of inputs that are not valid GNU
Fortran programs.

   Other notation used herein is that of the GNU texinfo format, which
is used to generate printed hardcopy, on-line hypertext (Info), and
on-line HTML versions, all from a single source document.  This
notation is used as follows:

   * Keywords defined by the GNU Fortran language are shown in
     uppercase, as in: `COMMON', `INTEGER', and `BLOCK DATA'.

     Note that, in practice, many Fortran programs are written in
     lowercase--uppercase is used in this manual as a means to readily
     distinguish keywords and sample Fortran-related text from the
     prose in this document.

   * Portions of actual sample program, input, or output text look like
     this: `Actual program text'.

     Generally, uppercase is used for all Fortran-specific and
     Fortran-related text, though this does not always include literal
     text within Fortran code.

     For example: `PRINT *, 'My name is Bob''.

   * A metasyntactic variable--that is, a name used in this document to
     serve as a placeholder for whatever text is used by the user or
     programmer-appears as shown in the following example:

     "The `INTEGER IVAR' statement specifies that IVAR is a variable or
     array of type `INTEGER'."

     In the above example, any valid text may be substituted for the
     metasyntactic variable IVAR to make the statement apply to a
     specific instance, as long as the same text is substituted for
     *both* occurrences of IVAR.

   * Ellipses ("...") are used to indicate further text that is either
     unimportant or expanded upon further, elsewhere.

   * Names of data types are in the style of Fortran 90, in most cases.

     *Note Kind Notation::, for information on the relationship between
     Fortran 90 nomenclature (such as `INTEGER(KIND=1)') and the more
     traditional, less portably concise nomenclature (such as
     `INTEGER*4').


File: g77.info,  Node: Terms and Concepts,  Next: Characters Lines Sequence,  Prev: Notation Used,  Up: Language

Fortran Terms and Concepts
==========================

   (The following information augments or overrides the information in
Chapter 2 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 2 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* Syntactic Items::
* Statements Comments Lines::
* Scope of Names and Labels::


File: g77.info,  Node: Syntactic Items,  Next: Statements Comments Lines,  Up: Terms and Concepts

Syntactic Items
---------------

   (Corresponds to Section 2.2 of ANSI X3.9-1978 FORTRAN 77.)

   In GNU Fortran, a symbolic name is at least one character long, and
has no arbitrary upper limit on length.  However, names of entities
requiring external linkage (such as external functions, external
subroutines, and `COMMON' areas) might be restricted to some arbitrary
length by the system.  Such a restriction is no more constrained than
that of one through six characters.

   Underscores (`_') are accepted in symbol names after the first
character (which must be a letter).


File: g77.info,  Node: Statements Comments Lines,  Next: Scope of Names and Labels,  Prev: Syntactic Items,  Up: Terms and Concepts

Statements, Comments, and Lines
-------------------------------

   (Corresponds to Section 2.3 of ANSI X3.9-1978 FORTRAN 77.)

   Use of an exclamation point (`!') to begin a trailing comment (a
comment that extends to the end of the same source line) is permitted
under the following conditions:

   * The exclamation point does not appear in column 6.  Otherwise, it
     is treated as an indicator of a continuation line.

   * The exclamation point appears outside a character or hollerith
     constant.  Otherwise, the exclamation point is considered part of
     the constant.

   * The exclamation point appears to the left of any other possible
     trailing comment.  That is, a trailing comment may contain
     exclamation points in their commentary text.

   Use of a semicolon (`;') as a statement separator is permitted under
the following conditions:

   * The semicolon appears outside a character or hollerith constant.
     Otherwise, the semicolon is considered part of the constant.

   * The semicolon appears to the left of a trailing comment.
     Otherwise, the semicolon is considered part of that comment.

   * Neither a logical `IF' statement nor a non-construct `WHERE'
     statement (a Fortran 90 feature) may be followed (in the same,
     possibly continued, line) by a semicolon used as a statement
     separator.

     This restriction avoids the confusion that can result when reading
     a line such as:

          IF (VALIDP) CALL FOO; CALL BAR

     Some readers might think the `CALL BAR' is executed only if
     `VALIDP' is `.TRUE.', while others might assume its execution is
     unconditional.

     (At present, `g77' does not diagnose code that violates this
     restriction.)


File: g77.info,  Node: Scope of Names and Labels,  Prev: Statements Comments Lines,  Up: Terms and Concepts

Scope of Symbolic Names and Statement Labels
--------------------------------------------

   (Corresponds to Section 2.9 of ANSI X3.9-1978 FORTRAN 77.)

   Included in the list of entities that have a scope of a program unit
are construct names (a Fortran 90 feature).  *Note Construct Names::,
for more information.


File: g77.info,  Node: Characters Lines Sequence,  Next: Data Types and Constants,  Prev: Terms and Concepts,  Up: Language

Characters, Lines, and Execution Sequence
=========================================

   (The following information augments or overrides the information in
Chapter 3 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 3 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* Character Set::
* Lines::
* Continuation Line::
* Statements::
* Statement Labels::
* Order::
* INCLUDE::


File: g77.info,  Node: Character Set,  Next: Lines,  Up: Characters Lines Sequence

GNU Fortran Character Set
-------------------------

   (Corresponds to Section 3.1 of ANSI X3.9-1978 FORTRAN 77.)

   Letters include uppercase letters (the twenty-six characters of the
English alphabet) and lowercase letters (their lowercase equivalent).
Generally, lowercase letters may be used in place of uppercase letters,
though in character and hollerith constants, they are distinct.

   Special characters include:

   * Semicolon (`;')

   * Exclamation point (`!')

   * Double quote (`"')

   * Backslash (`\')

   * Question mark (`?')

   * Hash mark (`#')

   * Ampersand (`&')

   * Percent sign (`%')

   * Underscore (`_')

   * Open angle (`<')

   * Close angle (`>')

   * The FORTRAN 77 special characters (<SPC>, `=', `+', `-', `*', `/',
     `(', `)', `,', `.', `$', `'', and `:')

   Note that this document refers to <SPC> as "space", while X3.9-1978
FORTRAN 77 refers to it as "blank".


File: g77.info,  Node: Lines,  Next: Continuation Line,  Prev: Character Set,  Up: Characters Lines Sequence

Lines
-----

   (Corresponds to Section 3.2 of ANSI X3.9-1978 FORTRAN 77.)

   The way a Fortran compiler views source files depends entirely on the
implementation choices made for the compiler, since those choices are
explicitly left to the implementation by the published Fortran
standards.

   The GNU Fortran language mandates a view applicable to UNIX-like
text files--files that are made up of an arbitrary number of lines,
each with an arbitrary number of characters (sometimes called
stream-based files).

   This view does not apply to types of files that are specified as
having a particular number of characters on every single line (sometimes
referred to as record-based files).

   Because a "line in a program unit is a sequence of 72 characters",
to quote X3.9-1978, the GNU Fortran language specifies that a
stream-based text file is translated to GNU Fortran lines as follows:

   * A newline in the file is the character that represents the end of
     a line of text to the underlying system.  For example, on
     ASCII-based systems, a newline is the <NL> character, which has
     ASCII value 12 (decimal).

   * Each newline in the file serves to end the line of text that
     precedes it (and that does not contain a newline).

   * The end-of-file marker (`EOF') also serves to end the line of text
     that precedes it (and that does not contain a newline).

   * Any line of text that is shorter than 72 characters is padded to
     that length with spaces (called "blanks" in the standard).

   * Any line of text that is longer than 72 characters is truncated to
     that length, but the truncated remainder must consist entirely of
     spaces.

   * Characters other than newline and the GNU Fortran character set
     are invalid.

   For the purposes of the remainder of this description of the GNU
Fortran language, the translation described above has already taken
place, unless otherwise specified.

   The result of the above translation is that the source file appears,
in terms of the remainder of this description of the GNU Fortran
language, as if it had an arbitrary number of 72-character lines, each
character being among the GNU Fortran character set.

   For example, if the source file itself has two newlines in a row,
the second newline becomes, after the above translation, a single line
containing 72 spaces.


File: g77.info,  Node: Continuation Line,  Next: Statements,  Prev: Lines,  Up: Characters Lines Sequence

Continuation Line
-----------------

   (Corresponds to Section 3.2.3 of ANSI X3.9-1978 FORTRAN 77.)

   A continuation line is any line that both

   * Contains a continuation character, and

   * Contains only spaces in columns 1 through 5

   A continuation character is any character of the GNU Fortran
character set other than space (<SPC>) or zero (`0') in column 6, or a
digit (`0' through `9') in column 7 through 72 of a line that has only
spaces to the left of that digit.

   The continuation character is ignored as far as the content of the
statement is concerned.

   The GNU Fortran language places no limit on the number of
continuation lines in a statement.  In practice, the limit depends on a
variety of factors, such as available memory, statement content, and so
on, but no GNU Fortran system may impose an arbitrary limit.


File: g77.info,  Node: Statements,  Next: Statement Labels,  Prev: Continuation Line,  Up: Characters Lines Sequence

Statements
----------

   (Corresponds to Section 3.3 of ANSI X3.9-1978 FORTRAN 77.)

   Statements may be written using an arbitrary number of continuation
lines.

   Statements may be separated using the semicolon (`;'), except that
the logical `IF' and non-construct `WHERE' statements may not be
separated from subsequent statements using only a semicolon as
statement separator.

   The `END PROGRAM', `END SUBROUTINE', `END FUNCTION', and `END BLOCK
DATA' statements are alternatives to the `END' statement.  These
alternatives may be written as normal statements--they are not subject
to the restrictions of the `END' statement.

   However, no statement other than `END' may have an initial line that
appears to be an `END' statement--even `END PROGRAM', for example, must
not be written as:

           END
          &PROGRAM


File: g77.info,  Node: Statement Labels,  Next: Order,  Prev: Statements,  Up: Characters Lines Sequence

Statement Labels
----------------

   (Corresponds to Section 3.4 of ANSI X3.9-1978 FORTRAN 77.)

   A statement separated from its predecessor via a semicolon may be
labeled as follows:

   * The semicolon is followed by the label for the statement, which in
     turn follows the label.

   * The label must be no more than five digits in length.

   * The first digit of the label for the statement is not the first
     non-space character on a line.  Otherwise, that character is
     treated as a continuation character.

   A statement may have only one label defined for it.


File: g77.info,  Node: Order,  Next: INCLUDE,  Prev: Statement Labels,  Up: Characters Lines Sequence

Order of Statements and Lines
-----------------------------

   (Corresponds to Section 3.5 of ANSI X3.9-1978 FORTRAN 77.)

   Generally, `DATA' statements may precede executable statements.
However, specification statements pertaining to any entities
initialized by a `DATA' statement must precede that `DATA' statement.
For example, after `DATA I/1/', `INTEGER I' is not permitted, but
`INTEGER J' is permitted.

   The last line of a program unit may be an `END' statement, or may be:

   * An `END PROGRAM' statement, if the program unit is a main program.

   * An `END SUBROUTINE' statement, if the program unit is a subroutine.

   * An `END FUNCTION' statement, if the program unit is a function.

   * An `END BLOCK DATA' statement, if the program unit is a block data.


File: g77.info,  Node: INCLUDE,  Prev: Order,  Up: Characters Lines Sequence

Including Source Text
---------------------

   Additional source text may be included in the processing of the
source file via the `INCLUDE' directive:

     INCLUDE FILENAME

The source text to be included is identified by FILENAME, which is a
literal GNU Fortran character constant.  The meaning and interpretation
of FILENAME depends on the implementation, but typically is a filename.

   (`g77' treats it as a filename that it searches for in the current
directory and/or directories specified via the `-I' command-line
option.)

   The effect of the `INCLUDE' directive is as if the included text
directly replaced the directive in the source file prior to
interpretation of the program.  Included text may itself use `INCLUDE'.
The depth of nested `INCLUDE' references depends on the implementation,
but typically is a positive integer.

   This virtual replacement treats the statements and `INCLUDE'
directives in the included text as syntactically distinct from those in
the including text.

   Therefore, the first non-comment line of the included text must not
be a continuation line.  The included text must therefore have, after
the non-comment lines, either an initial line (statement), an `INCLUDE'
directive, or nothing (the end of the included text).

   Similarly, the including text may end the `INCLUDE' directive with a
semicolon or the end of the line, but it cannot follow an `INCLUDE'
directive at the end of its line with a continuation line.  Thus, the
last statement in an included text may not be continued.

   Any statements between two `INCLUDE' directives on the same line are
treated as if they appeared in between the respective included texts.
For example:

     INCLUDE 'A'; PRINT *, 'B'; INCLUDE 'C'; END PROGRAM

If the text included by `INCLUDE 'A'' constitutes a `PRINT *, 'A''
statement and the text included by `INCLUDE 'C'' constitutes a `PRINT
*, 'C'' statement, then the output of the above sample program would be

     A
     B
     C

(with suitable allowances for how an implementation defines its
handling of output).

   Included text must not include itself directly or indirectly,
regardless of whether the FILENAME used to reference the text is the
same.

   Note that `INCLUDE' is *not* a statement.  As such, it is neither a
non-executable or executable statement.  However, if the text it
includes constitutes one or more executable statements, then the
placement of `INCLUDE' is subject to effectively the same restrictions
as those on executable statements.

   An `INCLUDE' directive may be continued across multiple lines as if
it were a statement.  This permits long names to be used for FILENAME.


File: g77.info,  Node: Data Types and Constants,  Next: Expressions,  Prev: Characters Lines Sequence,  Up: Language

Data Types and Constants
========================

   (The following information augments or overrides the information in
Chapter 4 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 4 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   To more concisely express the appropriate types for entities, this
document uses the more concise Fortran 90 nomenclature such as
`INTEGER(KIND=1)' instead of the more traditional, but less portably
concise, byte-size-based nomenclature such as `INTEGER*4', wherever
reasonable.

   When referring to generic types--in contexts where the specific
precision and range of a type are not important--this document uses the
generic type names `INTEGER', `LOGICAL', `REAL', `COMPLEX', and
`CHARACTER'.

   In some cases, the context requires specification of a particular
type.  This document uses the `KIND=' notation to accomplish this
throughout, sometimes supplying the more traditional notation for
clarification, though the traditional notation might not work the same
way on all GNU Fortran implementations.

   Use of `KIND=' makes this document more concise because `g77' is
able to define values for `KIND=' that have the same meanings on all
systems, due to the way the Fortran 90 standard specifies these values
are to be used.

   (In particular, that standard permits an implementation to
arbitrarily assign nonnegative values.  There are four distinct sets of
assignments: one to the `CHARACTER' type; one to the `INTEGER' type;
one to the `LOGICAL' type; and the fourth to both the `REAL' and
`COMPLEX' types.  Implementations are free to assign these values in
any order, leave gaps in the ordering of assignments, and assign more
than one value to a representation.)

   This makes `KIND=' values superior to the values used in
non-standard statements such as `INTEGER*4', because the meanings of
the values in those statements vary from machine to machine, compiler
to compiler, even operating system to operating system.

   However, use of `KIND=' is *not* generally recommended when writing
portable code (unless, for example, the code is going to be compiled
only via `g77', which is a widely ported compiler).  GNU Fortran does
not yet have adequate language constructs to permit use of `KIND=' in a
fashion that would make the code portable to Fortran 90
implementations; and, this construct is known to *not* be accepted by
many popular FORTRAN 77 implementations, so it cannot be used in code
that is to be ported to those.

   The distinction here is that this document is able to use specific
values for `KIND=' to concisely document the types of various
operations and operands.

   A Fortran program should use the FORTRAN 77 designations for the
appropriate GNU Fortran types--such as `INTEGER' for `INTEGER(KIND=1)',
`REAL' for `REAL(KIND=1)', and `DOUBLE COMPLEX' for
`COMPLEX(KIND=2)'--and, where no such designations exist, make use of
appropriate techniques (preprocessor macros, parameters, and so on) to
specify the types in a fashion that may be easily adjusted to suit each
particular implementation to which the program is ported.  (These types
generally won't need to be adjusted for ports of `g77'.)

   Further details regarding GNU Fortran data types and constants are
provided below.

* Menu:

* Types::
* Constants::
* Integer Type::
* Character Type::


File: g77.info,  Node: Types,  Next: Constants,  Up: Data Types and Constants

Data Types
----------

   (Corresponds to Section 4.1 of ANSI X3.9-1978 FORTRAN 77.)

   GNU Fortran supports these types:

  1. Integer (generic type `INTEGER')

  2. Real (generic type `REAL')

  3. Double precision

  4. Complex (generic type `COMPLEX')

  5. Logical (generic type `LOGICAL')

  6. Character (generic type `CHARACTER')

  7. Double Complex

   (The types numbered 1 through 6 above are standard FORTRAN 77 types.)

   The generic types shown above are referred to in this document using
only their generic type names.  Such references usually indicate that
any specific type (kind) of that generic type is valid.

   For example, a context described in this document as accepting the
`COMPLEX' type also is likely to accept the `DOUBLE COMPLEX' type.

   The GNU Fortran language supports three ways to specify a specific
kind of a generic type.

* Menu:

* Double Notation::  As in `DOUBLE COMPLEX'.
* Star Notation::    As in `INTEGER*4'.
* Kind Notation::    As in `INTEGER(KIND=1)'.


File: g77.info,  Node: Double Notation,  Next: Star Notation,  Up: Types

Double Notation
...............

   The GNU Fortran language supports two uses of the keyword `DOUBLE'
to specify a specific kind of type:

   * `DOUBLE PRECISION', equivalent to `REAL(KIND=2)'

   * `DOUBLE COMPLEX', equivalent to `COMPLEX(KIND=2)'

   Use one of the above forms where a type name is valid.

   While use of this notation is popular, it doesn't scale well in a
language or dialect rich in intrinsic types, as is the case for the GNU
Fortran language (especially planned future versions of it).

   After all, one rarely sees type names such as `DOUBLE INTEGER',
`QUADRUPLE REAL', or `QUARTER INTEGER'.  Instead, `INTEGER*8',
`REAL*16', and `INTEGER*1' often are substituted for these,
respectively, even though they do not always have the same meanings on
all systems.  (And, the fact that `DOUBLE REAL' does not exist as such
is an inconsistency.)

   Therefore, this document uses "double notation" only on occasion for
the benefit of those readers who are accustomed to it.


File: g77.info,  Node: Star Notation,  Next: Kind Notation,  Prev: Double Notation,  Up: Types

Star Notation
.............

   The following notation specifies the storage size for a type:

     GENERIC-TYPE*N

GENERIC-TYPE must be a generic type--one of `INTEGER', `REAL',
`COMPLEX', `LOGICAL', or `CHARACTER'.  N must be one or more digits
comprising a decimal integer number greater than zero.

   Use the above form where a type name is valid.

   The `*N' notation specifies that the amount of storage occupied by
variables and array elements of that type is N times the storage
occupied by a `CHARACTER*1' variable.

   This notation might indicate a different degree of precision and/or
range for such variables and array elements, and the functions that
return values of types using this notation.  It does not limit the
precision or range of values of that type in any particular way--use
explicit code to do that.

   Further, the GNU Fortran language requires no particular values for
N to be supported by an implementation via the `*N' notation.  `g77'
supports `INTEGER*1' (as `INTEGER(KIND=3)') on all systems, for example,
but not all implementations are required to do so, and `g77' is known
to not support `REAL*1' on most (or all) systems.

   As a result, except for GENERIC-TYPE of `CHARACTER', uses of this
notation should be limited to isolated portions of a program that are
intended to handle system-specific tasks and are expected to be
non-portable.

   (Standard FORTRAN 77 supports the `*N' notation for only
`CHARACTER', where it signifies not only the amount of storage
occupied, but the number of characters in entities of that type.
However, almost all Fortran compilers have supported this notation for
generic types, though with a variety of meanings for N.)

   Specifications of types using the `*N' notation always are
interpreted as specifications of the appropriate types described in
this document using the `KIND=N' notation, described below.

   While use of this notation is popular, it doesn't serve well in the
context of a widely portable dialect of Fortran, such as the GNU
Fortran language.

   For example, even on one particular machine, two or more popular
Fortran compilers might well disagree on the size of a type declared
`INTEGER*2' or `REAL*16'.  Certainly there is known to be disagreement
over such things among Fortran compilers on *different* systems.

   Further, this notation offers no elegant way to specify sizes that
are not even multiples of the "byte size" typically designated by
`INTEGER*1'.  Use of "absurd" values (such as `INTEGER*1000') would
certainly be possible, but would perhaps be stretching the original
intent of this notation beyond the breaking point in terms of
widespread readability of documentation and code making use of it.

   Therefore, this document uses "star notation" only on occasion for
the benefit of those readers who are accustomed to it.


File: g77.info,  Node: Kind Notation,  Prev: Star Notation,  Up: Types

Kind Notation
.............

   The following notation specifies the kind-type selector of a type:

     GENERIC-TYPE(KIND=N)

Use the above form where a type name is valid.

   GENERIC-TYPE must be a generic type--one of `INTEGER', `REAL',
`COMPLEX', `LOGICAL', or `CHARACTER'.  N must be an integer
initialization expression that is a positive, nonzero value.

   Programmers are discouraged from writing these values directly into
their code.  Future versions of the GNU Fortran language will offer
facilities that will make the writing of code portable to `g77' *and*
Fortran 90 implementations simpler.

   However, writing code that ports to existing FORTRAN 77
implementations depends on avoiding the `KIND=' construct.

   The `KIND=' construct is thus useful in the context of GNU Fortran
for two reasons:

   * It provides a means to specify a type in a fashion that is
     portable across all GNU Fortran implementations (though not other
     FORTRAN 77 and Fortran 90 implementations).

   * It provides a sort of Rosetta stone for this document to use to
     concisely describe the types of various operations and operands.

   The values of N in the GNU Fortran language are assigned using a
scheme that:

   * Attempts to maximize the ability of readers of this document to
     quickly familiarize themselves with assignments for popular types

   * Provides a unique value for each specific desired meaning

   * Provides a means to automatically assign new values so they have a
     "natural" relationship to existing values, if appropriate, or, if
     no such relationship exists, will not interfere with future values
     assigned on the basis of such relationships

   * Avoids using values that are similar to values used in the
     existing, popular `*N' notation, to prevent readers from expecting
     that these implied correspondences work on all GNU Fortran
     implementations

   The assignment system accomplishes this by assigning to each
"fundamental meaning" of a specific type a unique prime number.
Combinations of fundamental meanings--for example, a type that is two
times the size of some other type--are assigned values of N that are
the products of the values for those fundamental meanings.

   A prime value of N is never given more than one fundamental meaning,
to avoid situations where some code or system cannot reasonably provide
those meanings in the form of a single type.

   The values of N assigned so far are:

`KIND=0'
     This value is reserved for future use.

     The planned future use is for this value to designate, explicitly,
     context-sensitive kind-type selection.  For example, the
     expression `1D0 * 0.1_0' would be equivalent to `1D0 * 0.1D0'.

`KIND=1'
     This corresponds to the default types for `REAL', `INTEGER',
     `LOGICAL', `COMPLEX', and `CHARACTER', as appropriate.

     These are the "default" types described in the Fortran 90 standard,
     though that standard does not assign any particular `KIND=' value
     to these types.

     (Typically, these are `REAL*4', `INTEGER*4', `LOGICAL*4', and
     `COMPLEX*8'.)

`KIND=2'
     This corresponds to types that occupy twice as much storage as the
     default types.  `REAL(KIND=2)' is `DOUBLE PRECISION' (typically
     `REAL*8'), `COMPLEX(KIND=2)' is `DOUBLE COMPLEX' (typically
     `COMPLEX*16'),

     These are the "double precision" types described in the Fortran 90
     standard, though that standard does not assign any particular
     `KIND=' value to these types.

     N of 4 thus corresponds to types that occupy four times as much
     storage as the default types, N of 8 to types that occupy eight
     times as much storage, and so on.

     The `INTEGER(KIND=2)' and `LOGICAL(KIND=2)' types are not
     necessarily supported by every GNU Fortran implementation.

`KIND=3'
     This corresponds to types that occupy as much storage as the
     default `CHARACTER' type, which is the same effective type as
     `CHARACTER(KIND=1)' (making that type effectively the same as
     `CHARACTER(KIND=3)').

     (Typically, these are `INTEGER*1' and `LOGICAL*1'.)

     N of 6 thus corresponds to types that occupy twice as much storage
     as the N=3 types, N of 12 to types that occupy four times as much
     storage, and so on.

     These are not necessarily supported by every GNU Fortran
     implementation.

`KIND=5'
     This corresponds to types that occupy half the storage as the
     default (N=1) types.

     (Typically, these are `INTEGER*2' and `LOGICAL*2'.)

     N of 25 thus corresponds to types that occupy one-quarter as much
     storage as the default types.

     These are not necessarily supported by every GNU Fortran
     implementation.

`KIND=7'
     This is valid only as `INTEGER(KIND=7)' and denotes the `INTEGER'
     type that has the smallest storage size that holds a pointer on
     the system.

     A pointer representable by this type is capable of uniquely
     addressing a `CHARACTER*1' variable, array, array element, or
     substring.

     (Typically this is equivalent to `INTEGER*4' or, on 64-bit
     systems, `INTEGER*8'.  In a compatible C implementation, it
     typically would be the same size and semantics of the C type `void
     *'.)

   Note that these are *proposed* correspondences and might change in
future versions of `g77'--avoid writing code depending on them while
`g77', and therefore the GNU Fortran language it defines, is in beta
testing.

   Values not specified in the above list are reserved to future
versions of the GNU Fortran language.

   Implementation-dependent meanings will be assigned new, unique prime
numbers so as to not interfere with other implementation-dependent
meanings, and offer the possibility of increasing the portability of
code depending on such types by offering support for them in other GNU
Fortran implementations.

   Other meanings that might be given unique values are:

   * Types that make use of only half their storage size for
     representing precision and range.

     For example, some compilers offer options that cause `INTEGER'
     types to occupy the amount of storage that would be needed for
     `INTEGER(KIND=2)' types, but the range remains that of
     `INTEGER(KIND=1)'.

   * The IEEE single floating-point type.

   * Types with a specific bit pattern (endianness), such as the
     little-endian form of `INTEGER(KIND=1)'.  These could permit,
     conceptually, use of portable code and implementations on data
     files written by existing systems.

   Future *prime* numbers should be given meanings in as incremental a
fashion as possible, to allow for flexibility and expressiveness in
combining types.

   For example, instead of defining a prime number for little-endian
IEEE doubles, one prime number might be assigned the meaning
"little-endian", another the meaning "IEEE double", and the value of N
for a little-endian IEEE double would thus naturally be the product of
those two respective assigned values.  (It could even be reasonable to
have IEEE values result from the products of prime values denoting
exponent and fraction sizes and meanings, hidden bit usage,
availability and representations of special values such as subnormals,
infinities, and Not-A-Numbers (NaNs), and so on.)

   This assignment mechanism, while not inherently required for future
versions of the GNU Fortran language, is worth using because it could
ease management of the "space" of supported types much easier in the
long run.

   The above approach suggests a mechanism for specifying inheritance
of intrinsic (built-in) types for an entire, widely portable product
line.  It is certainly reasonable that, unlike programmers of other
languages offering inheritance mechanisms that employ verbose names for
classes and subclasses, along with graphical browsers to elucidate the
relationships, Fortran programmers would employ a mechanism that works
by multiplying prime numbers together and finding the prime factors of
such products.

   Most of the advantages for the above scheme have been explained
above.  One disadvantage is that it could lead to the defining, by the
GNU Fortran language, of some fairly large prime numbers.  This could
lead to the GNU Fortran language being declared "munitions" by the
United States Department of Defense.


File: g77.info,  Node: Constants,  Next: Integer Type,  Prev: Types,  Up: Data Types and Constants

Constants
---------

   (Corresponds to Section 4.2 of ANSI X3.9-1978 FORTRAN 77.)

   A "typeless constant" has one of the following forms:

     'BINARY-DIGITS'B
     'OCTAL-DIGITS'O
     'HEXADECIMAL-DIGITS'Z
     'HEXADECIMAL-DIGITS'X

BINARY-DIGITS, OCTAL-DIGITS, and HEXADECIMAL-DIGITS are nonempty
strings of characters in the set `01', `01234567', and
`0123456789ABCDEFabcdef', respectively.  (The value for `A' (and `a')
is 10, for `B' and `b' is 11, and so on.)

   Typeless constants have values that depend on the context in which
they are used.

   All other constants, called "typed constants", are
interpreted--converted to internal form--according to their inherent
type.  Thus, context is *never* a determining factor for the type, and
hence the interpretation, of a typed constant.  (All constants in the
ANSI FORTRAN 77 language are typed constants.)

   For example, `1' is always type `INTEGER(KIND=1)' in GNU Fortran
(called default INTEGER in Fortran 90), `9.435784839284958' is always
type `REAL(KIND=1)' (even if the additional precision specified is
lost, and even when used in a `REAL(KIND=2)' context), `1E0' is always
type `REAL(KIND=2)', and `1D0' is always type `REAL(KIND=2)'.


File: g77.info,  Node: Integer Type,  Next: Character Type,  Prev: Constants,  Up: Data Types and Constants

Integer Type
------------

   (Corresponds to Section 4.3 of ANSI X3.9-1978 FORTRAN 77.)

   An integer constant also may have one of the following forms:

     B'BINARY-DIGITS'
     O'OCTAL-DIGITS'
     Z'HEXADECIMAL-DIGITS'
     X'HEXADECIMAL-DIGITS'

BINARY-DIGITS, OCTAL-DIGITS, and HEXADECIMAL-DIGITS are nonempty
strings of characters in the set `01', `01234567', and
`0123456789ABCDEFabcdef', respectively.  (The value for `A' (and `a')
is 10, for `B' and `b' is 11, and so on.)


File: g77.info,  Node: Character Type,  Prev: Integer Type,  Up: Data Types and Constants

Character Type
--------------

   (Corresponds to Section 4.8 of ANSI X3.9-1978 FORTRAN 77.)

   A character constant may be delimited by a pair of double quotes
(`"') instead of apostrophes.  In this case, an apostrophe within the
constant represents a single apostrophe, while a double quote is
represented in the source text of the constant by two consecutive double
quotes with no intervening spaces.

   A character constant may be empty (have a length of zero).

   A character constant may include a substring specification, The
value of such a constant is the value of the substring--for example,
the value of `'hello'(3:5)' is the same as the value of `'llo''.


File: g77.info,  Node: Expressions,  Next: Specification Statements,  Prev: Data Types and Constants,  Up: Language

Expressions
===========

   (The following information augments or overrides the information in
Chapter 6 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 6 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* %LOC()::


File: g77.info,  Node: %LOC(),  Up: Expressions

The `%LOC()' Construct
----------------------

     %LOC(ARG)

   The `%LOC()' construct is an expression that yields the value of the
location of its argument, ARG, in memory.  The size of the type of the
expression depends on the system--typically, it is equivalent to either
`INTEGER(KIND=1)' or `INTEGER(KIND=2)', though it is actually type
`INTEGER(KIND=7)'.

   The argument to `%LOC()' must be suitable as the left-hand side of
an assignment statement.  That is, it may not be a general expression
involving operators such as addition, subtraction, and so on, nor may
it be a constant.

   Use of `%LOC()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions that deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%LOC()' returning a pointer that can be safely
used to *define* (change) the argument.  While this might work in some
circumstances, it is hard to predict whether it will continue to work
when a program (that works using this unsafe behavior) is recompiled
using different command-line options or a different version of `g77'.

   Generally, `%LOC()' is safe when used as an argument to a procedure
that makes use of the value of the corresponding dummy argument only
during its activation, and only when such use is restricted to
referencing (reading) the value of the argument to `%LOC()'.

   *Implementation Note:* Currently, `g77' passes arguments (those not
passed using a construct such as `%VAL()') by reference or descriptor,
depending on the type of the actual argument.  Thus, given `INTEGER I',
`CALL FOO(I)' would seem to mean the same thing as `CALL FOO(%LOC(I))',
and in fact might compile to identical code.

   However, `CALL FOO(%LOC(I))' emphatically means "pass the address of
`I' in memory".  While `CALL FOO(I)' might use that same approach in a
particular version of `g77', another version or compiler might choose a
different implementation, such as copy-in/copy-out, to effect the
desired behavior--and which will therefore not necessarily compile to
the same code as would `CALL FOO(%LOC(I))' using the same version or
compiler.

   *Note Debugging and Interfacing::, for detailed information on how
this particular version of `g77' implements various constructs.


File: g77.info,  Node: Specification Statements,  Next: Control Statements,  Prev: Expressions,  Up: Language

Specification Statements
========================

   (The following information augments or overrides the information in
Chapter 8 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 8 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* NAMELIST::
* DOUBLE COMPLEX::


File: g77.info,  Node: NAMELIST,  Next: DOUBLE COMPLEX,  Up: Specification Statements

`NAMELIST' Statement
--------------------

   The `NAMELIST' statement, and related I/O constructs, are supported
by the GNU Fortran language in essentially the same way as they are by
`f2c'.


File: g77.info,  Node: DOUBLE COMPLEX,  Prev: NAMELIST,  Up: Specification Statements

`DOUBLE COMPLEX' Statement
--------------------------

   `DOUBLE COMPLEX' is a type-statement (and type) that specifies the
type `COMPLEX(KIND=2)' in GNU Fortran.


File: g77.info,  Node: Control Statements,  Next: Functions and Subroutines,  Prev: Specification Statements,  Up: Language

Control Statements
==================

   (The following information augments or overrides the information in
Chapter 11 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 11 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* DO WHILE::
* END DO::
* Construct Names::
* CYCLE and EXIT::


File: g77.info,  Node: DO WHILE,  Next: END DO,  Up: Control Statements

DO WHILE
--------

   The `DO WHILE' statement, a feature of both the MIL-STD 1753 and
Fortran 90 standards, is provided by the GNU Fortran language.


File: g77.info,  Node: END DO,  Next: Construct Names,  Prev: DO WHILE,  Up: Control Statements

END DO
------

   The `END DO' statement is provided by the GNU Fortran language.

   This statement is used in one of two ways:

   * The Fortran 90 meaning, in which it specifies the termination
     point of a single `DO' loop started with a `DO' statement that
     specifies no termination label.

   * The MIL-STD 1753 meaning, in which it specifies the termination
     point of one or more `DO' loops, all of which start with a `DO'
     statement that specify the label defined for the `END DO'
     statement.

     This kind of `END DO' statement is merely a synonym for
     `CONTINUE', except it is permitted only when the statement is
     labeled and a target of one or more labeled `DO' loops.

     It is expected that this use of `END DO' will be removed from the
     GNU Fortran language in the future, though it is likely that it
     will long be supported by `g77' as a dialect form.


File: g77.info,  Node: Construct Names,  Next: CYCLE and EXIT,  Prev: END DO,  Up: Control Statements

Construct Names
---------------

   The GNU Fortran language supports construct names as defined by the
Fortran 90 standard.  These names are local to the program unit and are
defined as follows:

     CONSTRUCT-NAME: BLOCK-STATEMENT

Here, CONSTRUCT-NAME is the construct name itself; its definition is
connoted by the single colon (`:'); and BLOCK-STATEMENT is an `IF',
`DO', or `SELECT CASE' statement that begins a block.

   A block that is given a construct name must also specify the same
construct name in its termination statement:

     END BLOCK CONSTRUCT-NAME

Here, BLOCK must be `IF', `DO', or `SELECT', as appropriate.


File: g77.info,  Node: CYCLE and EXIT,  Prev: Construct Names,  Up: Control Statements

The `CYCLE' and `EXIT' Statements
---------------------------------

   The `CYCLE' and `EXIT' statements specify that the remaining
statements in the current iteration of a particular active (enclosing)
`DO' loop are to be skipped.

   `CYCLE' specifies that these statements are skipped, but the `END
DO' statement that marks the end of the `DO' loop be executed--that is,
the next iteration, if any, is to be started.  If the statement marking
the end of the `DO' loop is not `END DO'--in other words, if the loop
is not a block `DO'--the `CYCLE' statement does not execute that
statement, but does start the next iteration (if any).

   `EXIT' specifies that the loop specified by the `DO' construct is
terminated.

   The `DO' loop affected by `CYCLE' and `EXIT' is the innermost
enclosing `DO' loop when the following forms are used:

     CYCLE
     EXIT

   Otherwise, the following forms specify the construct name of the
pertinent `DO' loop:

     CYCLE CONSTRUCT-NAME
     EXIT CONSTRUCT-NAME

   `CYCLE' and `EXIT' can be viewed as glorified `GO TO' statements.
However, they cannot be easily thought of as `GO TO' statements in
obscure cases involving FORTRAN 77 loops.  For example:

           DO 10 I = 1, 5
           DO 10 J = 1, 5
              IF (J .EQ. 5) EXIT
           DO 10 K = 1, 5
              IF (K .EQ. 3) CYCLE
     10    PRINT *, 'I=', I, ' J=', J, ' K=', K
     20    CONTINUE

In particular, neither the `EXIT' nor `CYCLE' statements above are
equivalent to a `GO TO' statement to either label `10' or `20'.

   To understand the effect of `CYCLE' and `EXIT' in the above
fragment, it is helpful to first translate it to its equivalent using
only block `DO' loops:

           DO I = 1, 5
              DO J = 1, 5
                 IF (J .EQ. 5) EXIT
                 DO K = 1, 5
                    IF (K .EQ. 3) CYCLE
     10             PRINT *, 'I=', I, ' J=', J, ' K=', K
                 END DO
              END DO
           END DO
     20    CONTINUE

   Adding new labels allows translation of `CYCLE' and `EXIT' to `GO
TO' so they may be more easily understood by programmers accustomed to
FORTRAN coding:

           DO I = 1, 5
              DO J = 1, 5
                 IF (J .EQ. 5) GOTO 18
                 DO K = 1, 5
                    IF (K .EQ. 3) GO TO 12
     10             PRINT *, 'I=', I, ' J=', J, ' K=', K
     12          END DO
              END DO
     18    END DO
     20    CONTINUE

Thus, the `CYCLE' statement in the innermost loop skips over the
`PRINT' statement as it begins the next iteration of the loop, while
the `EXIT' statement in the middle loop ends that loop but *not* the
outermost loop.


File: g77.info,  Node: Functions and Subroutines,  Next: Scope and Classes of Names,  Prev: Control Statements,  Up: Language

Functions and Subroutines
=========================

   (The following information augments or overrides the information in
Chapter 15 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 15 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* %VAL()::
* %REF()::
* %DESCR()::
* Generics and Specifics::
* REAL() and AIMAG() of Complex::
* CMPLX() of DOUBLE PRECISION::
* MIL-STD 1753::
* f77/f2c Intrinsics::
* Table of Intrinsic Functions::


File: g77.info,  Node: %VAL(),  Next: %REF(),  Up: Functions and Subroutines

The `%VAL()' Construct
----------------------

     %VAL(ARG)

   The `%VAL()' construct specifies that an argument, ARG, is to be
passed by value, instead of by reference or descriptor.

   `%VAL()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%VAL()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   *Implementation Note:* Currently, `g77' passes all arguments either
by reference or by descriptor.

   Thus, use of `%VAL()' tends to be restricted to cases where the
called procedure is written in a language other than Fortran that
supports call-by-value semantics.  (C is an example of such a language.)

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77.info,  Node: %REF(),  Next: %DESCR(),  Prev: %VAL(),  Up: Functions and Subroutines

The `%REF()' Construct
----------------------

     %REF(ARG)

   The `%REF()' construct specifies that an argument, ARG, is to be
passed by reference, instead of by value or descriptor.

   `%REF()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%REF()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%REF()' supplying a pointer to the procedure being
invoked.  While that is a likely implementation choice, other
implementation choices are available that preserve Fortran
pass-by-reference semantics without passing a pointer to the argument,
ARG.  (For example, a copy-in/copy-out implementation.)

   *Implementation Note:* Currently, `g77' passes all arguments (other
than variables and arrays of type `CHARACTER') by reference.  Future
versions of, or dialects supported by, `g77' might not pass `CHARACTER'
functions by reference.

   Thus, use of `%REF()' tends to be restricted to cases where ARG is
type `CHARACTER' but the called procedure accesses it via a means other
than the method used for Fortran `CHARACTER' arguments.

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77.info,  Node: %DESCR(),  Next: Generics and Specifics,  Prev: %REF(),  Up: Functions and Subroutines

The `%DESCR()' Construct
------------------------

     %DESCR(ARG)

   The `%DESCR()' construct specifies that an argument, ARG, is to be
passed by descriptor, instead of by value or reference.

   `%DESCR()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%DESCR()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%DESCR()' supplying a pointer and/or a length
passed by value to the procedure being invoked.  While that is a likely
implementation choice, other implementation choices are available that
preserve the pass-by-reference semantics without passing a pointer to
the argument, ARG.  (For example, a copy-in/copy-out implementation.)
And, future versions of `g77' might change the way descriptors are
implemented, such as passing a single argument pointing to a record
containing the pointer/length information instead of passing that same
information via two arguments as it currently does.

   *Implementation Note:* Currently, `g77' passes all variables and
arrays of type `CHARACTER' by descriptor.  Future versions of, or
dialects supported by, `g77' might pass `CHARACTER' functions by
descriptor as well.

   Thus, use of `%DESCR()' tends to be restricted to cases where ARG is
not type `CHARACTER' but the called procedure accesses it via a means
similar to the method used for Fortran `CHARACTER' arguments.

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77.info,  Node: Generics and Specifics,  Next: REAL() and AIMAG() of Complex,  Prev: %DESCR(),  Up: Functions and Subroutines

Generics and Specifics
----------------------

   The ANSI FORTRAN 77 language defines generic and specific intrinsics.
In short, the distinctions are:

   * *Specific* intrinsics have specific types for their arguments and
     a specific return type.

   * *Generic* intrinsics are treated, on a case-by-case basis in the
     program's source code, as one of several possible specific
     intrinsics.

     Typically, a generic intrinsic has a return type that is
     determined by the type of one or more of its arguments.

   The GNU Fortran language generalizes these concepts somewhat,
especially by providing intrinsic subroutines and generic intrinsics
that are treated as either a specific intrinsic subroutine or a
specific intrinsic function (e.g. `SECOND').

   However, GNU Fortran avoids generalizing this concept to the point
where existing code would be accepted as meaning something possibly
different than what was intended.

   For example, `ABS' is a generic intrinsic, so all working code
written using `ABS' of an `INTEGER' argument expects an `INTEGER'
return value.  Similarly, all such code expects that `ABS' of an
`INTEGER*2' argument returns an `INTEGER*2' return value.

   Yet, `IABS' is a *specific* intrinsic that accepts only an
`INTEGER(KIND=1)' argument.  Code that passes something other than an
`INTEGER(KIND=1)' argument to `IABS' is not valid GNU Fortran code,
because it is not clear what the author intended.

   For example, if `J' is `INTEGER(KIND=6)', `IABS(J)' is not defined
by the GNU Fortran language, because the programmer might have used
that construct to mean any of the following, subtly different, things:

   * Convert `J' to `INTEGER(KIND=1)' first (as if `IABS(INT(J))' had
     been written).

   * Convert the result of the intrinsic to `INTEGER(KIND=1)' (as if
     `INT(ABS(J))' had been written).

   * No conversion (as if `ABS(J)' had been written).

   The distinctions matter especially when types and values wider than
`INTEGER(KIND=1)' (such as `INTEGER(KIND=2)'), or when operations
performing more "arithmetic" than absolute-value, are involved.

   The following sample program is not a valid GNU Fortran program, but
might be accepted by other compilers.  If so, the output is likely to
be revealing in terms of how a given compiler treats intrinsics (that
normally are specific) when they are given arguments that do not
conform to their stated requirements:

           PROGRAM JCB002
     C Version 1:
     C Modified 1997-05-21 (Burley) to accommodate compilers that implement
     C INT(I1-I2) as INT(I1)-INT(I2) given INTEGER*2 I1,I2.
     C
     C Version 0:
     C Written by James Craig Burley 1997-02-20.
     C Contact via Internet email: burley@gnu.org
     C
     C Purpose:
     C Determine how compilers handle non-standard IDIM
     C on INTEGER*2 operands, which presumably can be
     C extrapolated into understanding how the compiler
     C generally treats specific intrinsics that are passed
     C arguments not of the correct types.
     C
     C If your compiler implements INTEGER*2 and INTEGER
     C as the same type, change all INTEGER*2 below to
     C INTEGER*1.
     C
           INTEGER*2 I0, I4
           INTEGER I1, I2, I3
           INTEGER*2 ISMALL, ILARGE
           INTEGER*2 ITOOLG, ITWO
           INTEGER*2 ITMP
           LOGICAL L2, L3, L4
     C
     C Find smallest INTEGER*2 number.
     C
           ISMALL=0
      10   I0 = ISMALL-1
           IF ((I0 .GE. ISMALL) .OR. (I0+1 .NE. ISMALL)) GOTO 20
           ISMALL = I0
           GOTO 10
      20   CONTINUE
     C
     C Find largest INTEGER*2 number.
     C
           ILARGE=0
      30   I0 = ILARGE+1
           IF ((I0 .LE. ILARGE) .OR. (I0-1 .NE. ILARGE)) GOTO 40
           ILARGE = I0
           GOTO 30
      40   CONTINUE
     C
     C Multiplying by two adds stress to the situation.
     C
           ITWO = 2
     C
     C Need a number that, added to -2, is too wide to fit in I*2.
     C
           ITOOLG = ISMALL
     C
     C Use IDIM the straightforward way.
     C
           I1 = IDIM (ILARGE, ISMALL) * ITWO + ITOOLG
     C
     C Calculate result for first interpretation.
     C
           I2 = (INT (ILARGE) - INT (ISMALL)) * ITWO + ITOOLG
     C
     C Calculate result for second interpretation.
     C
           ITMP = ILARGE - ISMALL
           I3 = (INT (ITMP)) * ITWO + ITOOLG
     C
     C Calculate result for third interpretation.
     C
           I4 = (ILARGE - ISMALL) * ITWO + ITOOLG
     C
     C Print results.
     C
           PRINT *, 'ILARGE=', ILARGE
           PRINT *, 'ITWO=', ITWO
           PRINT *, 'ITOOLG=', ITOOLG
           PRINT *, 'ISMALL=', ISMALL
           PRINT *, 'I1=', I1
           PRINT *, 'I2=', I2
           PRINT *, 'I3=', I3
           PRINT *, 'I4=', I4
           PRINT *
           L2 = (I1 .EQ. I2)
           L3 = (I1 .EQ. I3)
           L4 = (I1 .EQ. I4)
           IF (L2 .AND. .NOT.L3 .AND. .NOT.L4) THEN
              PRINT *, 'Interp 1: IDIM(I*2,I*2) => IDIM(INT(I*2),INT(I*2))'
              STOP
           END IF
           IF (L3 .AND. .NOT.L2 .AND. .NOT.L4) THEN
              PRINT *, 'Interp 2: IDIM(I*2,I*2) => INT(DIM(I*2,I*2))'
              STOP
           END IF
           IF (L4 .AND. .NOT.L2 .AND. .NOT.L3) THEN
              PRINT *, 'Interp 3: IDIM(I*2,I*2) => DIM(I*2,I*2)'
              STOP
           END IF
           PRINT *, 'Results need careful analysis.'
           END

   No future version of the GNU Fortran language will likely permit
specific intrinsic invocations with wrong-typed arguments (such as
`IDIM' in the above example), since it has been determined that
disagreements exist among many production compilers on the
interpretation of such invocations.  These disagreements strongly
suggest that Fortran programmers, and certainly existing Fortran
programs, disagree about the meaning of such invocations.

   The first version of `JCB002' didn't accommodate some compilers'
treatment of `INT(I1-I2)' where `I1' and `I2' are `INTEGER*2'.  In such
a case, these compilers apparently convert both operands to `INTEGER*4'
and then do an `INTEGER*4' subtraction, instead of doing an `INTEGER*2'
subtraction on the original values in `I1' and `I2'.

   However, the results of the careful analyses done on the outputs of
programs compiled by these various compilers show that they all
implement either `Interp 1' or `Interp 2' above.

   Specifically, it is believed that the new version of `JCB002' above
will confirm that:

   * Digital Semiconductor ("DEC") Alpha OSF/1, HP-UX 10.0.1, AIX 3.2.5
     `f77' compilers all implement `Interp 1'.

   * IRIX 5.3 `f77' compiler implements `Interp 2'.

   * Solaris 2.5, SunOS 4.1.3, DECstation ULTRIX 4.3, and IRIX 6.1
     `f77' compilers all implement `Interp 3'.

   If you get different results than the above for the stated
compilers, or have results for other compilers that might be worth
adding to the above list, please let us know the details (compiler
product, version, machine, results, and so on).


File: g77.info,  Node: REAL() and AIMAG() of Complex,  Next: CMPLX() of DOUBLE PRECISION,  Prev: Generics and Specifics,  Up: Functions and Subroutines

`REAL()' and `AIMAG()' of Complex
---------------------------------

   The GNU Fortran language disallows `REAL(EXPR)' and `AIMAG(EXPR)',
where EXPR is any `COMPLEX' type other than `COMPLEX(KIND=1)', except
when they are used in the following way:

     REAL(REAL(EXPR))
     REAL(AIMAG(EXPR))

The above forms explicitly specify that the desired effect is to
convert the real or imaginary part of EXPR, which might be some `REAL'
type other than `REAL(KIND=1)', to type `REAL(KIND=1)', and have that
serve as the value of the expression.

   The GNU Fortran language offers clearly named intrinsics to extract
the real and imaginary parts of a complex entity without any conversion:

     REALPART(EXPR)
     IMAGPART(EXPR)

   To express the above using typical extended FORTRAN 77, use the
following constructs (when EXPR is `COMPLEX(KIND=2)'):

     DBLE(EXPR)
     DIMAG(EXPR)

   The FORTRAN 77 language offers no way to explicitly specify the real
and imaginary parts of a complex expression of arbitrary type,
apparently as a result of requiring support for only one `COMPLEX' type
(`COMPLEX(KIND=1)').  The concepts of converting an expression to type
`REAL(KIND=1)' and of extracting the real part of a complex expression
were thus "smooshed" by FORTRAN 77 into a single intrinsic, since they
happened to have the exact same effect in that language (due to having
only one `COMPLEX' type).

   *Note:* When `-ff90' is in effect, `g77' treats `REAL(EXPR)', where
EXPR is of type `COMPLEX', as `REALPART(EXPR)', whereas with
`-fugly-complex -fno-f90' in effect, it is treated as
`REAL(REALPART(EXPR))'.

   *Note Ugly Complex Part Extraction::, for more information.


File: g77.info,  Node: CMPLX() of DOUBLE PRECISION,  Next: MIL-STD 1753,  Prev: REAL() and AIMAG() of Complex,  Up: Functions and Subroutines

`CMPLX()' of `DOUBLE PRECISION'
-------------------------------

   In accordance with Fortran 90 and at least some (perhaps all) other
compilers, the GNU Fortran language defines `CMPLX()' as always
returning a result that is type `COMPLEX(KIND=1)'.

   This means `CMPLX(D1,D2)', where `D1' and `D2' are `REAL(KIND=2)'
(`DOUBLE PRECISION'), is treated as:

     CMPLX(SNGL(D1), SNGL(D2))

   (It was necessary for Fortran 90 to specify this behavior for
`DOUBLE PRECISION' arguments, since that is the behavior mandated by
FORTRAN 77.)

   The GNU Fortran language also provides the `DCMPLX()' intrinsic,
which is provided by some FORTRAN 77 compilers to construct a `DOUBLE
COMPLEX' entity from of `DOUBLE PRECISION' operands.  However, this
solution does not scale well when more `COMPLEX' types (having various
precisions and ranges) are offered by Fortran implementations.

   Fortran 90 extends the `CMPLX()' intrinsic by adding an extra
argument used to specify the desired kind of complex result.  However,
this solution is somewhat awkward to use, and `g77' currently does not
support it.

   The GNU Fortran language provides a simple way to build a complex
value out of two numbers, with the precise type of the value determined
by the types of the two numbers (via the usual type-promotion
mechanism):

     COMPLEX(REAL, IMAG)

   When REAL and IMAG are the same `REAL' types, `COMPLEX()' performs
no conversion other than to put them together to form a complex result
of the same (complex version of real) type.

   *Note Complex Intrinsic::, for more information.


File: g77.info,  Node: MIL-STD 1753,  Next: f77/f2c Intrinsics,  Prev: CMPLX() of DOUBLE PRECISION,  Up: Functions and Subroutines

MIL-STD 1753 Support
--------------------

   The GNU Fortran language includes the MIL-STD 1753 intrinsics
`BTEST', `IAND', `IBCLR', `IBITS', `IBSET', `IEOR', `IOR', `ISHFT',
`ISHFTC', `MVBITS', and `NOT'.


File: g77.info,  Node: f77/f2c Intrinsics,  Next: Table of Intrinsic Functions,  Prev: MIL-STD 1753,  Up: Functions and Subroutines

`f77'/`f2c' Intrinsics
----------------------

   The bit-manipulation intrinsics supported by traditional `f77' and
by `f2c' are available in the GNU Fortran language.  These include
`AND', `LSHIFT', `OR', `RSHIFT', and `XOR'.

   Also supported are the intrinsics `CDABS', `CDCOS', `CDEXP',
`CDLOG', `CDSIN', `CDSQRT', `DCMPLX', `DCONJG', `DFLOAT', `DIMAG',
`DREAL', and `IMAG', `ZABS', `ZCOS', `ZEXP', `ZLOG', `ZSIN', and
`ZSQRT'.


File: g77.info,  Node: Table of Intrinsic Functions,  Prev: f77/f2c Intrinsics,  Up: Functions and Subroutines

Table of Intrinsic Functions
----------------------------

   (Corresponds to Section 15.10 of ANSI X3.9-1978 FORTRAN 77.)

   The GNU Fortran language adds various functions, subroutines, types,
and arguments to the set of intrinsic functions in ANSI FORTRAN 77.
The complete set of intrinsics supported by the GNU Fortran language is
described below.

   Note that a name is not treated as that of an intrinsic if it is
specified in an `EXTERNAL' statement in the same program unit; if a
command-line option is used to disable the groups to which the
intrinsic belongs; or if the intrinsic is not named in an `INTRINSIC'
statement and a command-line option is used to hide the groups to which
the intrinsic belongs.

   So, it is recommended that any reference in a program unit to an
intrinsic procedure that is not a standard FORTRAN 77 intrinsic be
accompanied by an appropriate `INTRINSIC' statement in that program
unit.  This sort of defensive programming makes it more likely that an
implementation will issue a diagnostic rather than generate incorrect
code for such a reference.

   The terminology used below is based on that of the Fortran 90
standard, so that the text may be more concise and accurate:

   * `OPTIONAL' means the argument may be omitted.

   * `A-1, A-2, ..., A-n' means more than one argument (generally named
     `A') may be specified.

   * `scalar' means the argument must not be an array (must be a
     variable or array element, or perhaps a constant if expressions
     are permitted).

   * `DIMENSION(4)' means the argument must be an array having 4
     elements.

   * `INTENT(IN)' means the argument must be an expression (such as a
     constant or a variable that is defined upon invocation of the
     intrinsic).

   * `INTENT(OUT)' means the argument must be definable by the
     invocation of the intrinsic (that is, must not be a constant nor
     an expression involving operators other than array reference and
     substring reference).

   * `INTENT(INOUT)' means the argument must be defined prior to, and
     definable by, invocation of the intrinsic (a combination of the
     requirements of `INTENT(IN)' and `INTENT(OUT)'.

   * *Note Kind Notation:: for explanation of `KIND'.

   (Note that the empty lines appearing in the menu below are not
intentional--they result from a bug in the GNU `makeinfo' program...a
program that, if it did not exist, would leave this document in far
worse shape!)

* Menu:


* Abort Intrinsic::     Abort the program.

* Abs Intrinsic::       Absolute value.

* Access Intrinsic::    Check file accessibility.

* AChar Intrinsic::     ASCII character from code.

* ACos Intrinsic::      Arc cosine.

* AdjustL Intrinsic::   (Reserved for future use.)
* AdjustR Intrinsic::   (Reserved for future use.)

* AImag Intrinsic::     Convert/extract imaginary part of complex.

* AInt Intrinsic::      Truncate to whole number.

* Alarm Intrinsic::     Execute a routine after a given delay.

* All Intrinsic::       (Reserved for future use.)
* Allocated Intrinsic:: (Reserved for future use.)

* ALog Intrinsic::      Natural logarithm (archaic).
* ALog10 Intrinsic::    Natural logarithm (archaic).
* AMax0 Intrinsic::     Maximum value (archaic).
* AMax1 Intrinsic::     Maximum value (archaic).
* AMin0 Intrinsic::     Minimum value (archaic).
* AMin1 Intrinsic::     Minimum value (archaic).
* AMod Intrinsic::      Remainder (archaic).

* And Intrinsic::       Boolean AND.

* ANInt Intrinsic::     Round to nearest whole number.

* Any Intrinsic::       (Reserved for future use.)

* ASin Intrinsic::      Arc sine.

* Associated Intrinsic:: (Reserved for future use.)

* ATan Intrinsic::      Arc tangent.
* ATan2 Intrinsic::     Arc tangent.

* BesJ0 Intrinsic::     Bessel function.
* BesJ1 Intrinsic::     Bessel function.
* BesJN Intrinsic::     Bessel function.
* BesY0 Intrinsic::     Bessel function.
* BesY1 Intrinsic::     Bessel function.
* BesYN Intrinsic::     Bessel function.

* Bit_Size Intrinsic::  Number of bits in argument's type.

* BTest Intrinsic::     Test bit.

* CAbs Intrinsic::      Absolute value (archaic).
* CCos Intrinsic::      Cosine (archaic).

* Ceiling Intrinsic::   (Reserved for future use.)

* CExp Intrinsic::      Exponential (archaic).
* Char Intrinsic::      Character from code.

* ChDir Intrinsic (subroutine):: Change directory.

* ChMod Intrinsic (subroutine):: Change file modes.

* CLog Intrinsic::      Natural logarithm (archaic).
* Cmplx Intrinsic::     Construct `COMPLEX(KIND=1)' value.

* Complex Intrinsic::   Build complex value from real and
                         imaginary parts.

* Conjg Intrinsic::     Complex conjugate.
* Cos Intrinsic::       Cosine.

* CosH Intrinsic::      Hyperbolic cosine.

* Count Intrinsic::     (Reserved for future use.)
* CPU_Time Intrinsic::  Get current CPU time.
* CShift Intrinsic::    (Reserved for future use.)

* CSin Intrinsic::      Sine (archaic).
* CSqRt Intrinsic::     Square root (archaic).

* CTime Intrinsic (subroutine):: Convert time to Day Mon dd hh:mm:ss yyyy.
* CTime Intrinsic (function):: Convert time to Day Mon dd hh:mm:ss yyyy.

* DAbs Intrinsic::      Absolute value (archaic).
* DACos Intrinsic::     Arc cosine (archaic).

* DASin Intrinsic::     Arc sine (archaic).

* DATan Intrinsic::     Arc tangent (archaic).
* DATan2 Intrinsic::    Arc tangent (archaic).

* Date_and_Time Intrinsic:: (Reserved for future use.)

* DbesJ0 Intrinsic::    Bessel function (archaic).
* DbesJ1 Intrinsic::    Bessel function (archaic).
* DbesJN Intrinsic::    Bessel function (archaic).
* DbesY0 Intrinsic::    Bessel function (archaic).
* DbesY1 Intrinsic::    Bessel function (archaic).
* DbesYN Intrinsic::    Bessel function (archaic).

* Dble Intrinsic::      Convert to double precision.

* DCos Intrinsic::      Cosine (archaic).

* DCosH Intrinsic::     Hyperbolic cosine (archaic).
* DDiM Intrinsic::      Difference magnitude (archaic).

* DErF Intrinsic::      Error function (archaic).
* DErFC Intrinsic::     Complementary error function (archaic).

* DExp Intrinsic::      Exponential (archaic).

* Digits Intrinsic::    (Reserved for future use.)

* DiM Intrinsic::       Difference magnitude (non-negative subtract).

* DInt Intrinsic::      Truncate to whole number (archaic).
* DLog Intrinsic::      Natural logarithm (archaic).
* DLog10 Intrinsic::    Natural logarithm (archaic).
* DMax1 Intrinsic::     Maximum value (archaic).
* DMin1 Intrinsic::     Minimum value (archaic).
* DMod Intrinsic::      Remainder (archaic).
* DNInt Intrinsic::     Round to nearest whole number (archaic).

* Dot_Product Intrinsic:: (Reserved for future use.)

* DProd Intrinsic::     Double-precision product.

* DSign Intrinsic::     Apply sign to magnitude (archaic).
* DSin Intrinsic::      Sine (archaic).

* DSinH Intrinsic::     Hyperbolic sine (archaic).
* DSqRt Intrinsic::     Square root (archaic).
* DTan Intrinsic::      Tangent (archaic).

* DTanH Intrinsic::     Hyperbolic tangent (archaic).

* Dtime Intrinsic (subroutine):: Get elapsed time since last time.

* EOShift Intrinsic::   (Reserved for future use.)
* Epsilon Intrinsic::   (Reserved for future use.)

* ErF Intrinsic::       Error function.
* ErFC Intrinsic::      Complementary error function.
* ETime Intrinsic (subroutine):: Get elapsed time for process.
* ETime Intrinsic (function):: Get elapsed time for process.
* Exit Intrinsic::      Terminate the program.

* Exp Intrinsic::       Exponential.

* Exponent Intrinsic::  (Reserved for future use.)

* Fdate Intrinsic (subroutine):: Get current time as Day Mon dd hh:mm:ss yyyy.
* Fdate Intrinsic (function):: Get current time as Day Mon dd hh:mm:ss yyyy.
* FGet Intrinsic (subroutine):: Read a character from unit 5 stream-wise.

* FGetC Intrinsic (subroutine):: Read a character stream-wise.

* Float Intrinsic::     Conversion (archaic).

* Floor Intrinsic::     (Reserved for future use.)

* Flush Intrinsic::     Flush buffered output.
* FNum Intrinsic::      Get file descriptor from Fortran unit number.
* FPut Intrinsic (subroutine):: Write a character to unit 6 stream-wise.

* FPutC Intrinsic (subroutine):: Write a character stream-wise.

* Fraction Intrinsic::  (Reserved for future use.)

* FSeek Intrinsic::     Position file (low-level).
* FStat Intrinsic (subroutine):: Get file information.
* FStat Intrinsic (function):: Get file information.
* FTell Intrinsic (subroutine):: Get file position (low-level).
* FTell Intrinsic (function):: Get file position (low-level).
* GError Intrinsic::    Get error message for last error.
* GetArg Intrinsic::    Obtain command-line argument.
* GetCWD Intrinsic (subroutine):: Get current working directory.
* GetCWD Intrinsic (function):: Get current working directory.
* GetEnv Intrinsic::    Get environment variable.
* GetGId Intrinsic::    Get process group id.
* GetLog Intrinsic::    Get login name.
* GetPId Intrinsic::    Get process id.
* GetUId Intrinsic::    Get process user id.
* GMTime Intrinsic::    Convert time to GMT time info.
* HostNm Intrinsic (subroutine):: Get host name.
* HostNm Intrinsic (function):: Get host name.

* Huge Intrinsic::      (Reserved for future use.)

* IAbs Intrinsic::      Absolute value (archaic).

* IAChar Intrinsic::    ASCII code for character.

* IAnd Intrinsic::      Boolean AND.

* IArgC Intrinsic::     Obtain count of command-line arguments.

* IBClr Intrinsic::     Clear a bit.
* IBits Intrinsic::     Extract a bit subfield of a variable.
* IBSet Intrinsic::     Set a bit.

* IChar Intrinsic::     Code for character.

* IDate Intrinsic (UNIX):: Get local time info.

* IDiM Intrinsic::      Difference magnitude (archaic).
* IDInt Intrinsic::     Convert to `INTEGER' value truncated
                         to whole number (archaic).
* IDNInt Intrinsic::    Convert to `INTEGER' value rounded
                         to nearest whole number (archaic).

* IEOr Intrinsic::      Boolean XOR.

* IErrNo Intrinsic::    Get error number for last error.

* IFix Intrinsic::      Conversion (archaic).

* Imag Intrinsic::      Extract imaginary part of complex.

* ImagPart Intrinsic::  Extract imaginary part of complex.

* Index Intrinsic::     Locate a CHARACTER substring.

* Int Intrinsic::       Convert to `INTEGER' value truncated
                         to whole number.

* Int2 Intrinsic::      Convert to `INTEGER(KIND=6)' value
                         truncated to whole number.
* Int8 Intrinsic::      Convert to `INTEGER(KIND=2)' value
                         truncated to whole number.

* IOr Intrinsic::       Boolean OR.

* IRand Intrinsic::     Random number.
* IsaTty Intrinsic::    Is unit connected to a terminal?

* IShft Intrinsic::     Logical bit shift.
* IShftC Intrinsic::    Circular bit shift.

* ISign Intrinsic::     Apply sign to magnitude (archaic).

* ITime Intrinsic::     Get local time of day.

* Kill Intrinsic (subroutine):: Signal a process.

* Kind Intrinsic::      (Reserved for future use.)
* LBound Intrinsic::    (Reserved for future use.)

* Len Intrinsic::       Length of character entity.

* Len_Trim Intrinsic::  Get last non-blank character in string.

* LGe Intrinsic::       Lexically greater than or equal.
* LGt Intrinsic::       Lexically greater than.

* Link Intrinsic (subroutine):: Make hard link in file system.

* LLe Intrinsic::       Lexically less than or equal.
* LLt Intrinsic::       Lexically less than.

* LnBlnk Intrinsic::    Get last non-blank character in string.
* Loc Intrinsic::       Address of entity in core.

* Log Intrinsic::       Natural logarithm.
* Log10 Intrinsic::     Natural logarithm.

* Logical Intrinsic::   (Reserved for future use.)

* Long Intrinsic::      Conversion to `INTEGER(KIND=1)' (archaic).

* LShift Intrinsic::    Left-shift bits.

* LStat Intrinsic (subroutine):: Get file information.
* LStat Intrinsic (function):: Get file information.
* LTime Intrinsic::     Convert time to local time info.

* MatMul Intrinsic::    (Reserved for future use.)

* Max Intrinsic::       Maximum value.
* Max0 Intrinsic::      Maximum value (archaic).
* Max1 Intrinsic::      Maximum value (archaic).

* MaxExponent Intrinsic:: (Reserved for future use.)
* MaxLoc Intrinsic::    (Reserved for future use.)
* MaxVal Intrinsic::    (Reserved for future use.)

* MClock Intrinsic::    Get number of clock ticks for process.
* MClock8 Intrinsic::   Get number of clock ticks for process.

* Merge Intrinsic::     (Reserved for future use.)

* Min Intrinsic::       Minimum value.
* Min0 Intrinsic::      Minimum value (archaic).
* Min1 Intrinsic::      Minimum value (archaic).

* MinExponent Intrinsic:: (Reserved for future use.)
* MinLoc Intrinsic::    (Reserved for future use.)
* MinVal Intrinsic::    (Reserved for future use.)

* Mod Intrinsic::       Remainder.

* Modulo Intrinsic::    (Reserved for future use.)

* MvBits Intrinsic::    Moving a bit field.

* Nearest Intrinsic::   (Reserved for future use.)

* NInt Intrinsic::      Convert to `INTEGER' value rounded
                         to nearest whole number.

* Not Intrinsic::       Boolean NOT.

* Or Intrinsic::        Boolean OR.

* Pack Intrinsic::      (Reserved for future use.)

* PError Intrinsic::    Print error message for last error.

* Precision Intrinsic:: (Reserved for future use.)
* Present Intrinsic::   (Reserved for future use.)
* Product Intrinsic::   (Reserved for future use.)

* Radix Intrinsic::     (Reserved for future use.)

* Rand Intrinsic::      Random number.

* Random_Number Intrinsic:: (Reserved for future use.)
* Random_Seed Intrinsic:: (Reserved for future use.)
* Range Intrinsic::     (Reserved for future use.)

* Real Intrinsic::      Convert value to type `REAL(KIND=1)'.

* RealPart Intrinsic::  Extract real part of complex.

* Rename Intrinsic (subroutine):: Rename file.

* Repeat Intrinsic::    (Reserved for future use.)
* Reshape Intrinsic::   (Reserved for future use.)
* RRSpacing Intrinsic:: (Reserved for future use.)

* RShift Intrinsic::    Right-shift bits.

* Scale Intrinsic::     (Reserved for future use.)
* Scan Intrinsic::      (Reserved for future use.)

* Second Intrinsic (function):: Get CPU time for process in seconds.
* Second Intrinsic (subroutine):: Get CPU time for process
                         in seconds.

* Selected_Int_Kind Intrinsic:: (Reserved for future use.)
* Selected_Real_Kind Intrinsic:: (Reserved for future use.)
* Set_Exponent Intrinsic:: (Reserved for future use.)
* Shape Intrinsic::     (Reserved for future use.)

* Short Intrinsic::     Convert to `INTEGER(KIND=6)' value
                         truncated to whole number.

* Sign Intrinsic::      Apply sign to magnitude.

* Signal Intrinsic (subroutine):: Muck with signal handling.

* Sin Intrinsic::       Sine.

* SinH Intrinsic::      Hyperbolic sine.

* Sleep Intrinsic::     Sleep for a specified time.

* Sngl Intrinsic::      Convert (archaic).

* Spacing Intrinsic::   (Reserved for future use.)
* Spread Intrinsic::    (Reserved for future use.)

* SqRt Intrinsic::      Square root.

* SRand Intrinsic::     Random seed.
* Stat Intrinsic (subroutine):: Get file information.
* Stat Intrinsic (function):: Get file information.

* Sum Intrinsic::       (Reserved for future use.)

* SymLnk Intrinsic (subroutine):: Make symbolic link in file system.

* System Intrinsic (subroutine):: Invoke shell (system) command.

* System_Clock Intrinsic:: Get current system clock value.

* Tan Intrinsic::       Tangent.

* TanH Intrinsic::      Hyperbolic tangent.

* Time Intrinsic (UNIX):: Get current time as time value.

* Time8 Intrinsic::     Get current time as time value.

* Tiny Intrinsic::      (Reserved for future use.)
* Transfer Intrinsic::  (Reserved for future use.)
* Transpose Intrinsic:: (Reserved for future use.)
* Trim Intrinsic::      (Reserved for future use.)

* TtyNam Intrinsic (subroutine):: Get name of terminal device for unit.
* TtyNam Intrinsic (function):: Get name of terminal device for unit.

* UBound Intrinsic::    (Reserved for future use.)

* UMask Intrinsic (subroutine):: Set file creation permissions mask.

* Unlink Intrinsic (subroutine):: Unlink file.

* Unpack Intrinsic::    (Reserved for future use.)
* Verify Intrinsic::    (Reserved for future use.)

* XOr Intrinsic::       Boolean XOR.
* ZAbs Intrinsic::      Absolute value (archaic).
* ZCos Intrinsic::      Cosine (archaic).
* ZExp Intrinsic::      Exponential (archaic).

* ZLog Intrinsic::      Natural logarithm (archaic).
* ZSin Intrinsic::      Sine (archaic).
* ZSqRt Intrinsic::     Square root (archaic).


File: g77.info,  Node: Abort Intrinsic,  Next: Abs Intrinsic,  Up: Table of Intrinsic Functions

Abort Intrinsic
...............

     CALL Abort()

Intrinsic groups: `unix'.

Description:

   Prints a message and potentially causes a core dump via `abort(3)'.


File: g77.info,  Node: Abs Intrinsic,  Next: Access Intrinsic,  Prev: Abort Intrinsic,  Up: Table of Intrinsic Functions

Abs Intrinsic
.............

     Abs(A)

Abs: `INTEGER' or `REAL' function.  The exact type depends on that of
argument A--if A is `COMPLEX', this function's type is `REAL' with the
same `KIND=' value as the type of A.  Otherwise, this function's type
is the same as that of A.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the absolute value of A.

   If A is type `COMPLEX', the absolute value is computed as:

     SQRT(REALPART(A)**2, IMAGPART(A)**2)

Otherwise, it is computed by negating the A if it is negative, or
returning A.

   *Note Sign Intrinsic::, for how to explicitly compute the positive
or negative form of the absolute value of an expression.


File: g77.info,  Node: Access Intrinsic,  Next: AChar Intrinsic,  Prev: Abs Intrinsic,  Up: Table of Intrinsic Functions

Access Intrinsic
................

     Access(NAME, MODE)

Access: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Checks file NAME for accessibility in the mode specified by MODE and
returns 0 if the file is accessible in that mode, otherwise an error
code if the file is inaccessible or MODE is invalid.  See `access(2)'.
A null character (`CHAR(0)') marks the end of the name in
NAME--otherwise, trailing blanks in NAME are ignored.  MODE may be a
concatenation of any of the following characters:

`r'
     Read permission

`w'
     Write permission

`x'
     Execute permission

`SPC'
     Existence


File: g77.info,  Node: AChar Intrinsic,  Next: ACos Intrinsic,  Prev: Access Intrinsic,  Up: Table of Intrinsic Functions

AChar Intrinsic
...............

     AChar(I)

AChar: `CHARACTER*1' function.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `f90'.

Description:

   Returns the ASCII character corresponding to the code specified by I.

   *Note IAChar Intrinsic::, for the inverse of this function.

   *Note Char Intrinsic::, for the function corresponding to the
system's native character set.


File: g77.info,  Node: ACos Intrinsic,  Next: AdjustL Intrinsic,  Prev: AChar Intrinsic,  Up: Table of Intrinsic Functions

ACos Intrinsic
..............

     ACos(X)

ACos: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-cosine (inverse cosine) of X in radians.

   *Note Cos Intrinsic::, for the inverse of this function.


File: g77.info,  Node: AdjustL Intrinsic,  Next: AdjustR Intrinsic,  Prev: ACos Intrinsic,  Up: Table of Intrinsic Functions

AdjustL Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AdjustL' to use this name for
an external procedure.


File: g77.info,  Node: AdjustR Intrinsic,  Next: AImag Intrinsic,  Prev: AdjustL Intrinsic,  Up: Table of Intrinsic Functions

AdjustR Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AdjustR' to use this name for
an external procedure.


File: g77.info,  Node: AImag Intrinsic,  Next: AInt Intrinsic,  Prev: AdjustR Intrinsic,  Up: Table of Intrinsic Functions

AImag Intrinsic
...............

     AImag(Z)

AImag: `REAL' function.  This intrinsic is valid when argument Z is
`COMPLEX(KIND=1)'.  When Z is any other `COMPLEX' type, this intrinsic
is valid only when used as the argument to `REAL()', as explained below.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the (possibly converted) imaginary part of Z.

   Use of `AIMAG()' with an argument of a type other than
`COMPLEX(KIND=1)' is restricted to the following case:

     REAL(AIMAG(Z))

This expression converts the imaginary part of Z to `REAL(KIND=1)'.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77.info,  Node: AInt Intrinsic,  Next: Alarm Intrinsic,  Prev: AImag Intrinsic,  Up: Table of Intrinsic Functions

AInt Intrinsic
..............

     AInt(A)

AInt: `REAL' function, the `KIND=' value of the type being that of
argument A.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved.  (Also called "truncation towards zero".)

   *Note ANInt Intrinsic::, for how to round to nearest whole number.

   *Note Int Intrinsic::, for how to truncate and then convert number
to `INTEGER'.


File: g77.info,  Node: Alarm Intrinsic,  Next: All Intrinsic,  Prev: AInt Intrinsic,  Up: Table of Intrinsic Functions

Alarm Intrinsic
...............

     CALL Alarm(SECONDS, HANDLER, STATUS)

SECONDS: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Causes external subroutine HANDLER to be executed after a delay of
SECONDS seconds by using `alarm(1)' to set up a signal and `signal(2)'
to catch it.  If STATUS is supplied, it will be returned with the the
number of seconds remaining until any previously scheduled alarm was
due to be delivered, or zero if there was no previously scheduled alarm.
*Note Signal Intrinsic (subroutine)::.


File: g77.info,  Node: All Intrinsic,  Next: Allocated Intrinsic,  Prev: Alarm Intrinsic,  Up: Table of Intrinsic Functions

All Intrinsic
.............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL All' to use this name for an
external procedure.


File: g77.info,  Node: Allocated Intrinsic,  Next: ALog Intrinsic,  Prev: All Intrinsic,  Up: Table of Intrinsic Functions

Allocated Intrinsic
...................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Allocated' to use this name
for an external procedure.


File: g77.info,  Node: ALog Intrinsic,  Next: ALog10 Intrinsic,  Prev: Allocated Intrinsic,  Up: Table of Intrinsic Functions

ALog Intrinsic
..............

     ALog(X)

ALog: `REAL(KIND=1)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77.info,  Node: ALog10 Intrinsic,  Next: AMax0 Intrinsic,  Prev: ALog Intrinsic,  Up: Table of Intrinsic Functions

ALog10 Intrinsic
................

     ALog10(X)

ALog10: `REAL(KIND=1)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG10()' that is specific to one type for X.  *Note
Log10 Intrinsic::.


File: g77.info,  Node: AMax0 Intrinsic,  Next: AMax1 Intrinsic,  Prev: ALog10 Intrinsic,  Up: Table of Intrinsic Functions

AMax0 Intrinsic
...............

     AMax0(A-1, A-2, ..., A-n)

AMax0: `REAL(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A and a
different return type.  *Note Max Intrinsic::.


File: g77.info,  Node: AMax1 Intrinsic,  Next: AMin0 Intrinsic,  Prev: AMax0 Intrinsic,  Up: Table of Intrinsic Functions

AMax1 Intrinsic
...............

     AMax1(A-1, A-2, ..., A-n)

AMax1: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77.info,  Node: AMin0 Intrinsic,  Next: AMin1 Intrinsic,  Prev: AMax1 Intrinsic,  Up: Table of Intrinsic Functions

AMin0 Intrinsic
...............

     AMin0(A-1, A-2, ..., A-n)

AMin0: `REAL(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A and a
different return type.  *Note Min Intrinsic::.


File: g77.info,  Node: AMin1 Intrinsic,  Next: AMod Intrinsic,  Prev: AMin0 Intrinsic,  Up: Table of Intrinsic Functions

AMin1 Intrinsic
...............

     AMin1(A-1, A-2, ..., A-n)

AMin1: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77.info,  Node: AMod Intrinsic,  Next: And Intrinsic,  Prev: AMin1 Intrinsic,  Up: Table of Intrinsic Functions

AMod Intrinsic
..............

     AMod(A, P)

AMod: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; scalar; INTENT(IN).

P: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MOD()' that is specific to one type for A.  *Note
Mod Intrinsic::.


File: g77.info,  Node: And Intrinsic,  Next: ANInt Intrinsic,  Prev: AMod Intrinsic,  Up: Table of Intrinsic Functions

And Intrinsic
.............

     And(I, J)

And: `INTEGER' or `LOGICAL' function, the exact type being the result
of cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean AND of pair of bits in each of
I and J.


File: g77.info,  Node: ANInt Intrinsic,  Next: Any Intrinsic,  Prev: And Intrinsic,  Up: Table of Intrinsic Functions

ANInt Intrinsic
...............

     ANInt(A)

ANInt: `REAL' function, the `KIND=' value of the type being that of
argument A.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude eliminated by
rounding to the nearest whole number and with its sign preserved.

   A fractional portion exactly equal to `.5' is rounded to the whole
number that is larger in magnitude.  (Also called "Fortran round".)

   *Note AInt Intrinsic::, for how to truncate to whole number.

   *Note NInt Intrinsic::, for how to round and then convert number to
`INTEGER'.


File: g77.info,  Node: Any Intrinsic,  Next: ASin Intrinsic,  Prev: ANInt Intrinsic,  Up: Table of Intrinsic Functions

Any Intrinsic
.............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Any' to use this name for an
external procedure.


File: g77.info,  Node: ASin Intrinsic,  Next: Associated Intrinsic,  Prev: Any Intrinsic,  Up: Table of Intrinsic Functions

ASin Intrinsic
..............

     ASin(X)

ASin: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-sine (inverse sine) of X in radians.

   *Note Sin Intrinsic::, for the inverse of this function.


File: g77.info,  Node: Associated Intrinsic,  Next: ATan Intrinsic,  Prev: ASin Intrinsic,  Up: Table of Intrinsic Functions

Associated Intrinsic
....................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Associated' to use this name
for an external procedure.


File: g77.info,  Node: ATan Intrinsic,  Next: ATan2 Intrinsic,  Prev: Associated Intrinsic,  Up: Table of Intrinsic Functions

ATan Intrinsic
..............

     ATan(X)

ATan: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-tangent (inverse tangent) of X in radians.

   *Note Tan Intrinsic::, for the inverse of this function.


File: g77.info,  Node: ATan2 Intrinsic,  Next: BesJ0 Intrinsic,  Prev: ATan Intrinsic,  Up: Table of Intrinsic Functions

ATan2 Intrinsic
...............

     ATan2(Y, X)

ATan2: `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

Y: `REAL'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-tangent (inverse tangent) of the complex number (Y,
X) in radians.

   *Note Tan Intrinsic::, for the inverse of this function.


File: g77.info,  Node: BesJ0 Intrinsic,  Next: BesJ1 Intrinsic,  Prev: ATan2 Intrinsic,  Up: Table of Intrinsic Functions

BesJ0 Intrinsic
...............

     BesJ0(X)

BesJ0: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order 0 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: BesJ1 Intrinsic,  Next: BesJN Intrinsic,  Prev: BesJ0 Intrinsic,  Up: Table of Intrinsic Functions

BesJ1 Intrinsic
...............

     BesJ1(X)

BesJ1: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order 1 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: BesJN Intrinsic,  Next: BesY0 Intrinsic,  Prev: BesJ1 Intrinsic,  Up: Table of Intrinsic Functions

BesJN Intrinsic
...............

     BesJN(N, X)

BesJN: `REAL' function, the `KIND=' value of the type being that of
argument X.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order N of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: BesY0 Intrinsic,  Next: BesY1 Intrinsic,  Prev: BesJN Intrinsic,  Up: Table of Intrinsic Functions

BesY0 Intrinsic
...............

     BesY0(X)

BesY0: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order 0 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: BesY1 Intrinsic,  Next: BesYN Intrinsic,  Prev: BesY0 Intrinsic,  Up: Table of Intrinsic Functions

BesY1 Intrinsic
...............

     BesY1(X)

BesY1: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order 1 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: BesYN Intrinsic,  Next: Bit_Size Intrinsic,  Prev: BesY1 Intrinsic,  Up: Table of Intrinsic Functions

BesYN Intrinsic
...............

     BesYN(N, X)

BesYN: `REAL' function, the `KIND=' value of the type being that of
argument X.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order N of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77.info,  Node: Bit_Size Intrinsic,  Next: BTest Intrinsic,  Prev: BesYN Intrinsic,  Up: Table of Intrinsic Functions

Bit_Size Intrinsic
..................

     Bit_Size(I)

Bit_Size: `INTEGER' function, the `KIND=' value of the type being that
of argument I.

I: `INTEGER'; scalar.

Intrinsic groups: `f90'.

Description:

   Returns the number of bits (integer precision plus sign bit)
represented by the type for I.

   *Note BTest Intrinsic::, for how to test the value of a bit in a
variable or array.

   *Note IBSet Intrinsic::, for how to set a bit in a variable to 1.

   *Note IBClr Intrinsic::, for how to set a bit in a variable to 0.


File: g77.info,  Node: BTest Intrinsic,  Next: CAbs Intrinsic,  Prev: Bit_Size Intrinsic,  Up: Table of Intrinsic Functions

BTest Intrinsic
...............

     BTest(I, POS)

BTest: `LOGICAL(KIND=1)' function.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns `.TRUE.' if bit POS in I is 1, `.FALSE.' otherwise.

   (Bit 0 is the low-order (rightmost) bit, adding the value 2**0, or 1,
to the number if set to 1; bit 1 is the next-higher-order bit, adding
2**1, or 2; bit 2 adds 2**2, or 4; and so on.)

   *Note Bit_Size Intrinsic::, for how to obtain the number of bits in
a type.  The leftmost bit of I is `BIT_SIZE(I-1)'.


File: g77.info,  Node: CAbs Intrinsic,  Next: CCos Intrinsic,  Prev: BTest Intrinsic,  Up: Table of Intrinsic Functions

CAbs Intrinsic
..............

     CAbs(A)

CAbs: `REAL(KIND=1)' function.

A: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77.info,  Node: CCos Intrinsic,  Next: Ceiling Intrinsic,  Prev: CAbs Intrinsic,  Up: Table of Intrinsic Functions

CCos Intrinsic
..............

     CCos(X)

CCos: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77.info,  Node: Ceiling Intrinsic,  Next: CExp Intrinsic,  Prev: CCos Intrinsic,  Up: Table of Intrinsic Functions

Ceiling Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Ceiling' to use this name for
an external procedure.


File: g77.info,  Node: CExp Intrinsic,  Next: Char Intrinsic,  Prev: Ceiling Intrinsic,  Up: Table of Intrinsic Functions

CExp Intrinsic
..............

     CExp(X)

CExp: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77.info,  Node: Char Intrinsic,  Next: ChDir Intrinsic (subroutine),  Prev: CExp Intrinsic,  Up: Table of Intrinsic Functions

Char Intrinsic
..............

     Char(I)

Char: `CHARACTER*1' function.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the character corresponding to the code specified by I,
using the system's native character set.

   Because the system's native character set is used, the
correspondence between character and their codes is not necessarily the
same between GNU Fortran implementations.

   Note that no intrinsic exists to convert a numerical value to a
printable character string.  For example, there is no intrinsic that,
given an `INTEGER' or `REAL' argument with the value `154', returns the
`CHARACTER' result `'154''.

   Instead, you can use internal-file I/O to do this kind of conversion.
For example:

     INTEGER VALUE
     CHARACTER*10 STRING
     VALUE = 154
     WRITE (STRING, '(I10)'), VALUE
     PRINT *, STRING
     END

   The above program, when run, prints:

             154

   *Note IChar Intrinsic::, for the inverse of the `CHAR' function.

   *Note AChar Intrinsic::, for the function corresponding to the ASCII
character set.


File: g77.info,  Node: ChDir Intrinsic (subroutine),  Next: ChMod Intrinsic (subroutine),  Prev: Char Intrinsic,  Up: Table of Intrinsic Functions

ChDir Intrinsic (subroutine)
............................

     CALL ChDir(DIR, STATUS)

DIR: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets the current working directory to be DIR.  If the STATUS
argument is supplied, it contains 0 on success or a non-zero error code
otherwise upon return.  See `chdir(3)'.

   *Caution:* Using this routine during I/O to a unit connected with a
non-absolute file name can cause subsequent I/O on such a unit to fail
because the I/O library may reopen files by name.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note ChDir
Intrinsic (function)::.


File: g77.info,  Node: ChMod Intrinsic (subroutine),  Next: CLog Intrinsic,  Prev: ChDir Intrinsic (subroutine),  Up: Table of Intrinsic Functions

ChMod Intrinsic (subroutine)
............................

     CALL ChMod(NAME, MODE, STATUS)

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Changes the access mode of file NAME according to the specification
MODE, which is given in the format of `chmod(1)'.  A null character
(`CHAR(0)') marks the end of the name in NAME--otherwise, trailing
blanks in NAME are ignored.  Currently, NAME must not contain the
single quote character.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Note that this currently works by actually invoking `/bin/chmod' (or
the `chmod' found when the library was configured) and so may fail in
some circumstances and will, anyway, be slow.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note ChMod
Intrinsic (function)::.


File: g77.info,  Node: CLog Intrinsic,  Next: Cmplx Intrinsic,  Prev: ChMod Intrinsic (subroutine),  Up: Table of Intrinsic Functions

CLog Intrinsic
..............

     CLog(X)

CLog: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77.info,  Node: Cmplx Intrinsic,  Next: Complex Intrinsic,  Prev: CLog Intrinsic,  Up: Table of Intrinsic Functions

Cmplx Intrinsic
...............

     Cmplx(X, Y)

Cmplx: `COMPLEX(KIND=1)' function.

X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX');
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   If X is not type `COMPLEX', constructs a value of type
`COMPLEX(KIND=1)' from the real and imaginary values specified by X and
Y, respectively.  If Y is omitted, `0.' is assumed.

   If X is type `COMPLEX', converts it to type `COMPLEX(KIND=1)'.

   *Note Complex Intrinsic::, for information on easily constructing a
`COMPLEX' value of arbitrary precision from `REAL' arguments.


File: g77.info,  Node: Complex Intrinsic,  Next: Conjg Intrinsic,  Prev: Cmplx Intrinsic,  Up: Table of Intrinsic Functions

Complex Intrinsic
.................

     Complex(REAL, IMAG)

Complex: `COMPLEX' function, the exact type being the result of
cross-promoting the types of all the arguments.

REAL: `INTEGER' or `REAL'; scalar; INTENT(IN).

IMAG: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns a `COMPLEX' value that has `Real' and `Imag' as its real and
imaginary parts, respectively.

   If REAL and IMAG are the same type, and that type is not `INTEGER',
no data conversion is performed, and the type of the resulting value
has the same kind value as the types of REAL and IMAG.

   If REAL and IMAG are not the same type, the usual type-promotion
rules are applied to both, converting either or both to the appropriate
`REAL' type.  The type of the resulting value has the same kind value
as the type to which both REAL and IMAG were converted, in this case.

   If REAL and IMAG are both `INTEGER', they are both converted to
`REAL(KIND=1)', and the result of the `COMPLEX()' invocation is type
`COMPLEX(KIND=1)'.

   *Note:* The way to do this in standard Fortran 90 is too hairy to
describe here, but it is important to note that `CMPLX(D1,D2)' returns
a `COMPLEX(KIND=1)' result even if `D1' and `D2' are type
`REAL(KIND=2)'.  Hence the availability of `COMPLEX()' in GNU Fortran.


File: g77.info,  Node: Conjg Intrinsic,  Next: Cos Intrinsic,  Prev: Complex Intrinsic,  Up: Table of Intrinsic Functions

Conjg Intrinsic
...............

     Conjg(Z)

Conjg: `COMPLEX' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the complex conjugate:

     COMPLEX(REALPART(Z), -IMAGPART(Z))


File: g77.info,  Node: Cos Intrinsic,  Next: CosH Intrinsic,  Prev: Conjg Intrinsic,  Up: Table of Intrinsic Functions

Cos Intrinsic
.............

     Cos(X)

Cos: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the cosine of X, an angle measured in radians.

   *Note ACos Intrinsic::, for the inverse of this function.


File: g77.info,  Node: CosH Intrinsic,  Next: Count Intrinsic,  Prev: Cos Intrinsic,  Up: Table of Intrinsic Functions

CosH Intrinsic
..............

     CosH(X)

CosH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic cosine of X.


File: g77.info,  Node: Count Intrinsic,  Next: CPU_Time Intrinsic,  Prev: CosH Intrinsic,  Up: Table of Intrinsic Functions

Count Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Count' to use this name for an
external procedure.


File: g77.info,  Node: CPU_Time Intrinsic,  Next: CShift Intrinsic,  Prev: Count Intrinsic,  Up: Table of Intrinsic Functions

CPU_Time Intrinsic
..................

     CALL CPU_Time(SECONDS)

SECONDS: `REAL'; scalar; INTENT(OUT).

Intrinsic groups: `f90'.

Description:

   Returns in SECONDS the current value of the system time.  This
implementation of the Fortran 95 intrinsic is just an alias for
`second' *Note Second Intrinsic (subroutine)::.


File: g77.info,  Node: CShift Intrinsic,  Next: CSin Intrinsic,  Prev: CPU_Time Intrinsic,  Up: Table of Intrinsic Functions

CShift Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL CShift' to use this name for an
external procedure.


File: g77.info,  Node: CSin Intrinsic,  Next: CSqRt Intrinsic,  Prev: CShift Intrinsic,  Up: Table of Intrinsic Functions

CSin Intrinsic
..............

     CSin(X)

CSin: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77.info,  Node: CSqRt Intrinsic,  Next: CTime Intrinsic (subroutine),  Prev: CSin Intrinsic,  Up: Table of Intrinsic Functions

CSqRt Intrinsic
...............

     CSqRt(X)

CSqRt: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77.info,  Node: CTime Intrinsic (subroutine),  Next: CTime Intrinsic (function),  Prev: CSqRt Intrinsic,  Up: Table of Intrinsic Functions

CTime Intrinsic (subroutine)
............................

     CALL CTime(RESULT, STIME)

RESULT: `CHARACTER'; scalar; INTENT(OUT).

STIME: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Converts STIME, a system time value, such as returned by `TIME8()',
to a string of the form `Sat Aug 19 18:13:14 1995', and returns that
string in RESULT.

   *Note Time8 Intrinsic::.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note CTime
Intrinsic (function)::.


File: g77.info,  Node: CTime Intrinsic (function),  Next: DAbs Intrinsic,  Prev: CTime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

CTime Intrinsic (function)
..........................

     CTime(STIME)

CTime: `CHARACTER*(*)' function.

STIME: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Converts STIME, a system time value, such as returned by `TIME8()',
to a string of the form `Sat Aug 19 18:13:14 1995', and returns that
string as the function value.

   *Note Time8 Intrinsic::.

   For information on other intrinsics with the same name: *Note CTime
Intrinsic (subroutine)::.


File: g77.info,  Node: DAbs Intrinsic,  Next: DACos Intrinsic,  Prev: CTime Intrinsic (function),  Up: Table of Intrinsic Functions

DAbs Intrinsic
..............

     DAbs(A)

DAbs: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77.info,  Node: DACos Intrinsic,  Next: DASin Intrinsic,  Prev: DAbs Intrinsic,  Up: Table of Intrinsic Functions

DACos Intrinsic
...............

     DACos(X)

DACos: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ACOS()' that is specific to one type for X.  *Note
ACos Intrinsic::.


File: g77.info,  Node: DASin Intrinsic,  Next: DATan Intrinsic,  Prev: DACos Intrinsic,  Up: Table of Intrinsic Functions

DASin Intrinsic
...............

     DASin(X)

DASin: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ASIN()' that is specific to one type for X.  *Note
ASin Intrinsic::.


File: g77.info,  Node: DATan Intrinsic,  Next: DATan2 Intrinsic,  Prev: DASin Intrinsic,  Up: Table of Intrinsic Functions

DATan Intrinsic
...............

     DATan(X)

DATan: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ATAN()' that is specific to one type for X.  *Note
ATan Intrinsic::.


File: g77.info,  Node: DATan2 Intrinsic,  Next: Date_and_Time Intrinsic,  Prev: DATan Intrinsic,  Up: Table of Intrinsic Functions

DATan2 Intrinsic
................

     DATan2(Y, X)

DATan2: `REAL(KIND=2)' function.

Y: `REAL(KIND=2)'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ATAN2()' that is specific to one type for Y and X.
*Note ATan2 Intrinsic::.


File: g77.info,  Node: Date_and_Time Intrinsic,  Next: DbesJ0 Intrinsic,  Prev: DATan2 Intrinsic,  Up: Table of Intrinsic Functions

Date_and_Time Intrinsic
.......................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Date_and_Time' to use this
name for an external procedure.


File: g77.info,  Node: DbesJ0 Intrinsic,  Next: DbesJ1 Intrinsic,  Prev: Date_and_Time Intrinsic,  Up: Table of Intrinsic Functions

DbesJ0 Intrinsic
................

     DbesJ0(X)

DbesJ0: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJ0()' that is specific to one type for X.  *Note
BesJ0 Intrinsic::.


File: g77.info,  Node: DbesJ1 Intrinsic,  Next: DbesJN Intrinsic,  Prev: DbesJ0 Intrinsic,  Up: Table of Intrinsic Functions

DbesJ1 Intrinsic
................

     DbesJ1(X)

DbesJ1: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJ1()' that is specific to one type for X.  *Note
BesJ1 Intrinsic::.


File: g77.info,  Node: DbesJN Intrinsic,  Next: DbesY0 Intrinsic,  Prev: DbesJ1 Intrinsic,  Up: Table of Intrinsic Functions

DbesJN Intrinsic
................

     DbesJN(N, X)

DbesJN: `REAL(KIND=2)' function.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJN()' that is specific to one type for X.  *Note
BesJN Intrinsic::.


File: g77.info,  Node: DbesY0 Intrinsic,  Next: DbesY1 Intrinsic,  Prev: DbesJN Intrinsic,  Up: Table of Intrinsic Functions

DbesY0 Intrinsic
................

     DbesY0(X)

DbesY0: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESY0()' that is specific to one type for X.  *Note
BesY0 Intrinsic::.


File: g77.info,  Node: DbesY1 Intrinsic,  Next: DbesYN Intrinsic,  Prev: DbesY0 Intrinsic,  Up: Table of Intrinsic Functions

DbesY1 Intrinsic
................

     DbesY1(X)

DbesY1: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESY1()' that is specific to one type for X.  *Note
BesY1 Intrinsic::.


File: g77.info,  Node: DbesYN Intrinsic,  Next: Dble Intrinsic,  Prev: DbesY1 Intrinsic,  Up: Table of Intrinsic Functions

DbesYN Intrinsic
................

     DbesYN(N, X)

DbesYN: `REAL(KIND=2)' function.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESYN()' that is specific to one type for X.  *Note
BesYN Intrinsic::.


File: g77.info,  Node: Dble Intrinsic,  Next: DCos Intrinsic,  Prev: DbesYN Intrinsic,  Up: Table of Intrinsic Functions

Dble Intrinsic
..............

     Dble(A)

Dble: `REAL(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A converted to double precision (`REAL(KIND=2)').  If A is
`COMPLEX', the real part of A is used for the conversion and the
imaginary part disregarded.

   *Note Sngl Intrinsic::, for the function that converts to single
precision.

   *Note Int Intrinsic::, for the function that converts to `INTEGER'.

   *Note Complex Intrinsic::, for the function that converts to
`COMPLEX'.


File: g77.info,  Node: DCos Intrinsic,  Next: DCosH Intrinsic,  Prev: Dble Intrinsic,  Up: Table of Intrinsic Functions

DCos Intrinsic
..............

     DCos(X)

DCos: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77.info,  Node: DCosH Intrinsic,  Next: DDiM Intrinsic,  Prev: DCos Intrinsic,  Up: Table of Intrinsic Functions

DCosH Intrinsic
...............

     DCosH(X)

DCosH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COSH()' that is specific to one type for X.  *Note
CosH Intrinsic::.


File: g77.info,  Node: DDiM Intrinsic,  Next: DErF Intrinsic,  Prev: DCosH Intrinsic,  Up: Table of Intrinsic Functions

DDiM Intrinsic
..............

     DDiM(X, Y)

DDiM: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Y: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `DIM()' that is specific to one type for X and Y.
*Note DiM Intrinsic::.


File: g77.info,  Node: DErF Intrinsic,  Next: DErFC Intrinsic,  Prev: DDiM Intrinsic,  Up: Table of Intrinsic Functions

DErF Intrinsic
..............

     DErF(X)

DErF: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `ERF()' that is specific to one type for X.  *Note
ErF Intrinsic::.


File: g77.info,  Node: DErFC Intrinsic,  Next: DExp Intrinsic,  Prev: DErF Intrinsic,  Up: Table of Intrinsic Functions

DErFC Intrinsic
...............

     DErFC(X)

DErFC: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `ERFC()' that is specific to one type for X.  *Note
ErFC Intrinsic::.


File: g77.info,  Node: DExp Intrinsic,  Next: Digits Intrinsic,  Prev: DErFC Intrinsic,  Up: Table of Intrinsic Functions

DExp Intrinsic
..............

     DExp(X)

DExp: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77.info,  Node: Digits Intrinsic,  Next: DiM Intrinsic,  Prev: DExp Intrinsic,  Up: Table of Intrinsic Functions

Digits Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Digits' to use this name for an
external procedure.


File: g77.info,  Node: DiM Intrinsic,  Next: DInt Intrinsic,  Prev: Digits Intrinsic,  Up: Table of Intrinsic Functions

DiM Intrinsic
.............

     DiM(X, Y)

DiM: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

X: `INTEGER' or `REAL'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `X-Y' if X is greater than Y; otherwise returns zero.


File: g77.info,  Node: DInt Intrinsic,  Next: DLog Intrinsic,  Prev: DiM Intrinsic,  Up: Table of Intrinsic Functions

DInt Intrinsic
..............

     DInt(A)

DInt: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `AINT()' that is specific to one type for A.  *Note
AInt Intrinsic::.


File: g77.info,  Node: DLog Intrinsic,  Next: DLog10 Intrinsic,  Prev: DInt Intrinsic,  Up: Table of Intrinsic Functions

DLog Intrinsic
..............

     DLog(X)

DLog: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77.info,  Node: DLog10 Intrinsic,  Next: DMax1 Intrinsic,  Prev: DLog Intrinsic,  Up: Table of Intrinsic Functions

DLog10 Intrinsic
................

     DLog10(X)

DLog10: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG10()' that is specific to one type for X.  *Note
Log10 Intrinsic::.


File: g77.info,  Node: DMax1 Intrinsic,  Next: DMin1 Intrinsic,  Prev: DLog10 Intrinsic,  Up: Table of Intrinsic Functions

DMax1 Intrinsic
...............

     DMax1(A-1, A-2, ..., A-n)

DMax1: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77.info,  Node: DMin1 Intrinsic,  Next: DMod Intrinsic,  Prev: DMax1 Intrinsic,  Up: Table of Intrinsic Functions

DMin1 Intrinsic
...............

     DMin1(A-1, A-2, ..., A-n)

DMin1: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77.info,  Node: DMod Intrinsic,  Next: DNInt Intrinsic,  Prev: DMin1 Intrinsic,  Up: Table of Intrinsic Functions

DMod Intrinsic
..............

     DMod(A, P)

DMod: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

P: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MOD()' that is specific to one type for A.  *Note
Mod Intrinsic::.


File: g77.info,  Node: DNInt Intrinsic,  Next: Dot_Product Intrinsic,  Prev: DMod Intrinsic,  Up: Table of Intrinsic Functions

DNInt Intrinsic
...............

     DNInt(A)

DNInt: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ANINT()' that is specific to one type for A.  *Note
ANInt Intrinsic::.


File: g77.info,  Node: Dot_Product Intrinsic,  Next: DProd Intrinsic,  Prev: DNInt Intrinsic,  Up: Table of Intrinsic Functions

Dot_Product Intrinsic
.....................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Dot_Product' to use this name
for an external procedure.


File: g77.info,  Node: DProd Intrinsic,  Next: DSign Intrinsic,  Prev: Dot_Product Intrinsic,  Up: Table of Intrinsic Functions

DProd Intrinsic
...............

     DProd(X, Y)

DProd: `REAL(KIND=2)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Y: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `DBLE(X)*DBLE(Y)'.


File: g77.info,  Node: DSign Intrinsic,  Next: DSin Intrinsic,  Prev: DProd Intrinsic,  Up: Table of Intrinsic Functions

DSign Intrinsic
...............

     DSign(A, B)

DSign: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

B: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIGN()' that is specific to one type for A and B.
*Note Sign Intrinsic::.


File: g77.info,  Node: DSin Intrinsic,  Next: DSinH Intrinsic,  Prev: DSign Intrinsic,  Up: Table of Intrinsic Functions

DSin Intrinsic
..............

     DSin(X)

DSin: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77.info,  Node: DSinH Intrinsic,  Next: DSqRt Intrinsic,  Prev: DSin Intrinsic,  Up: Table of Intrinsic Functions

DSinH Intrinsic
...............

     DSinH(X)

DSinH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SINH()' that is specific to one type for X.  *Note
SinH Intrinsic::.


File: g77.info,  Node: DSqRt Intrinsic,  Next: DTan Intrinsic,  Prev: DSinH Intrinsic,  Up: Table of Intrinsic Functions

DSqRt Intrinsic
...............

     DSqRt(X)

DSqRt: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77.info,  Node: DTan Intrinsic,  Next: DTanH Intrinsic,  Prev: DSqRt Intrinsic,  Up: Table of Intrinsic Functions

DTan Intrinsic
..............

     DTan(X)

DTan: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `TAN()' that is specific to one type for X.  *Note
Tan Intrinsic::.


File: g77.info,  Node: DTanH Intrinsic,  Next: Dtime Intrinsic (subroutine),  Prev: DTan Intrinsic,  Up: Table of Intrinsic Functions

DTanH Intrinsic
...............

     DTanH(X)

DTanH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `TANH()' that is specific to one type for X.  *Note
TanH Intrinsic::.


File: g77.info,  Node: Dtime Intrinsic (subroutine),  Next: EOShift Intrinsic,  Prev: DTanH Intrinsic,  Up: Table of Intrinsic Functions

Dtime Intrinsic (subroutine)
............................

     CALL Dtime(RESULT, TARRAY)

RESULT: `REAL(KIND=1)'; scalar; INTENT(OUT).

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Initially, return the number of seconds of runtime since the start
of the process's execution in RESULT, and the user and system
components of this in `TARRAY(1)' and `TARRAY(2)' respectively.  The
value of RESULT is equal to `TARRAY(1) + TARRAY(2)'.

   Subsequent invocations of `DTIME()' set values based on accumulations
since the previous invocation.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note Dtime
Intrinsic (function)::.


File: g77.info,  Node: EOShift Intrinsic,  Next: Epsilon Intrinsic,  Prev: Dtime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

EOShift Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL EOShift' to use this name for
an external procedure.


File: g77.info,  Node: Epsilon Intrinsic,  Next: ErF Intrinsic,  Prev: EOShift Intrinsic,  Up: Table of Intrinsic Functions

Epsilon Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Epsilon' to use this name for
an external procedure.


File: g77.info,  Node: ErF Intrinsic,  Next: ErFC Intrinsic,  Prev: Epsilon Intrinsic,  Up: Table of Intrinsic Functions

ErF Intrinsic
.............

     ErF(X)

ErF: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the error function of X.  See `erf(3m)', which provides the
implementation.


File: g77.info,  Node: ErFC Intrinsic,  Next: ETime Intrinsic (subroutine),  Prev: ErF Intrinsic,  Up: Table of Intrinsic Functions

ErFC Intrinsic
..............

     ErFC(X)

ErFC: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the complementary error function of X: `ERFC(R) = 1 -
ERF(R)' (except that the result may be more accurate than explicitly
evaluating that formulae would give).  See `erfc(3m)', which provides
the implementation.


File: g77.info,  Node: ETime Intrinsic (subroutine),  Next: ETime Intrinsic (function),  Prev: ErFC Intrinsic,  Up: Table of Intrinsic Functions

ETime Intrinsic (subroutine)
............................

     CALL ETime(RESULT, TARRAY)

RESULT: `REAL(KIND=1)'; scalar; INTENT(OUT).

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Return the number of seconds of runtime since the start of the
process's execution in RESULT, and the user and system components of
this in `TARRAY(1)' and `TARRAY(2)' respectively.  The value of RESULT
is equal to `TARRAY(1) + TARRAY(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note ETime
Intrinsic (function)::.


File: g77.info,  Node: ETime Intrinsic (function),  Next: Exit Intrinsic,  Prev: ETime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

ETime Intrinsic (function)
..........................

     ETime(TARRAY)

ETime: `REAL(KIND=1)' function.

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Return the number of seconds of runtime since the start of the
process's execution as the function value, and the user and system
components of this in `TARRAY(1)' and `TARRAY(2)' respectively.  The
functions' value is equal to `TARRAY(1) + TARRAY(2)'.

   For information on other intrinsics with the same name: *Note ETime
Intrinsic (subroutine)::.


File: g77.info,  Node: Exit Intrinsic,  Next: Exp Intrinsic,  Prev: ETime Intrinsic (function),  Up: Table of Intrinsic Functions

Exit Intrinsic
..............

     CALL Exit(STATUS)

STATUS: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Exit the program with status STATUS after closing open Fortran I/O
units and otherwise behaving as `exit(2)'.  If STATUS is omitted the
canonical `success' value will be returned to the system.


File: g77.info,  Node: Exp Intrinsic,  Next: Exponent Intrinsic,  Prev: Exit Intrinsic,  Up: Table of Intrinsic Functions

Exp Intrinsic
.............

     Exp(X)

Exp: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `E**X', where E is approximately 2.7182818.

   *Note Log Intrinsic::, for the inverse of this function.


File: g77.info,  Node: Exponent Intrinsic,  Next: Fdate Intrinsic (subroutine),  Prev: Exp Intrinsic,  Up: Table of Intrinsic Functions

Exponent Intrinsic
..................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Exponent' to use this name for
an external procedure.


File: g77.info,  Node: Fdate Intrinsic (subroutine),  Next: Fdate Intrinsic (function),  Prev: Exponent Intrinsic,  Up: Table of Intrinsic Functions

Fdate Intrinsic (subroutine)
............................

     CALL Fdate(DATE)

DATE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the current date (using the same format as `CTIME()') in
DATE.

   Equivalent to:

     CALL CTIME(DATE, TIME8())

   *Note CTime Intrinsic (subroutine)::.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note Fdate
Intrinsic (function)::.


File: g77.info,  Node: Fdate Intrinsic (function),  Next: FGet Intrinsic (subroutine),  Prev: Fdate Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Fdate Intrinsic (function)
..........................

     Fdate()

Fdate: `CHARACTER*(*)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current date (using the same format as `CTIME()').

   Equivalent to:

     CTIME(TIME8())

   *Note CTime Intrinsic (function)::.

   For information on other intrinsics with the same name: *Note Fdate
Intrinsic (subroutine)::.


File: g77.info,  Node: FGet Intrinsic (subroutine),  Next: FGetC Intrinsic (subroutine),  Prev: Fdate Intrinsic (function),  Up: Table of Intrinsic Functions

FGet Intrinsic (subroutine)
...........................

     CALL FGet(C, STATUS)

C: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Reads a single character into C in stream mode from unit 5
(by-passing normal formatted output) using `getc(3)'.  Returns in
STATUS 0 on success, -1 on end-of-file, and the error code from
`ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGet
Intrinsic (function)::.


File: g77.info,  Node: FGetC Intrinsic (subroutine),  Next: Float Intrinsic,  Prev: FGet Intrinsic (subroutine),  Up: Table of Intrinsic Functions

FGetC Intrinsic (subroutine)
............................

     CALL FGetC(UNIT, C, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Reads a single character into C in stream mode from unit UNIT
(by-passing normal formatted output) using `getc(3)'.  Returns in
STATUS 0 on success, -1 on end-of-file, and the error code from
`ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGetC
Intrinsic (function)::.


File: g77.info,  Node: Float Intrinsic,  Next: Floor Intrinsic,  Prev: FGetC Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Float Intrinsic
...............

     Float(A)

Float: `REAL(KIND=1)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77.info,  Node: Floor Intrinsic,  Next: Flush Intrinsic,  Prev: Float Intrinsic,  Up: Table of Intrinsic Functions

Floor Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Floor' to use this name for an
external procedure.


File: g77.info,  Node: Flush Intrinsic,  Next: FNum Intrinsic,  Prev: Floor Intrinsic,  Up: Table of Intrinsic Functions

Flush Intrinsic
...............

     CALL Flush(UNIT)

UNIT: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Flushes Fortran unit(s) currently open for output.  Without the
optional argument, all such units are flushed, otherwise just the unit
specified by UNIT.

   Some non-GNU implementations of Fortran provide this intrinsic as a
library procedure that might or might not support the (optional) UNIT
argument.


File: g77.info,  Node: FNum Intrinsic,  Next: FPut Intrinsic (subroutine),  Prev: Flush Intrinsic,  Up: Table of Intrinsic Functions

FNum Intrinsic
..............

     FNum(UNIT)

FNum: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the Unix file descriptor number corresponding to the open
Fortran I/O unit UNIT.  This could be passed to an interface to C I/O
routines.


File: g77.info,  Node: FPut Intrinsic (subroutine),  Next: FPutC Intrinsic (subroutine),  Prev: FNum Intrinsic,  Up: Table of Intrinsic Functions

FPut Intrinsic (subroutine)
...........................

     CALL FPut(C, STATUS)

C: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Writes the single character C in stream mode to unit 6 (by-passing
normal formatted output) using `putc(3)'.  Returns in STATUS 0 on
success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPut
Intrinsic (function)::.


File: g77.info,  Node: FPutC Intrinsic (subroutine),  Next: Fraction Intrinsic,  Prev: FPut Intrinsic (subroutine),  Up: Table of Intrinsic Functions

FPutC Intrinsic (subroutine)
............................

     CALL FPutC(UNIT, C, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Writes the single character UNIT in stream mode to unit 6
(by-passing normal formatted output) using `putc(3)'.  Returns in C 0
on success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPutC
Intrinsic (function)::.


File: g77.info,  Node: Fraction Intrinsic,  Next: FSeek Intrinsic,  Prev: FPutC Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Fraction Intrinsic
..................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Fraction' to use this name for
an external procedure.


File: g77.info,  Node: FSeek Intrinsic,  Next: FStat Intrinsic (subroutine),  Prev: Fraction Intrinsic,  Up: Table of Intrinsic Functions

FSeek Intrinsic
...............

     CALL FSeek(UNIT, OFFSET, WHENCE, ERRLAB)

UNIT: `INTEGER'; scalar; INTENT(IN).

OFFSET: `INTEGER'; scalar; INTENT(IN).

WHENCE: `INTEGER'; scalar; INTENT(IN).

ERRLAB: `*LABEL', where LABEL is the label of an executable statement;
OPTIONAL.

Intrinsic groups: `unix'.

Description:

   Attempts to move Fortran unit UNIT to the specified OFFSET: absolute
offset if OFFSET=0; relative to the current offset if OFFSET=1;
relative to the end of the file if OFFSET=2.  It branches to label
WHENCE if UNIT is not open or if the call otherwise fails.


File: g77.info,  Node: FStat Intrinsic (subroutine),  Next: FStat Intrinsic (function),  Prev: FSeek Intrinsic,  Up: Table of Intrinsic Functions

FStat Intrinsic (subroutine)
............................

     CALL FStat(UNIT, SARRAY, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the file open on Fortran I/O unit UNIT and places
them in the array SARRAY.  The values in this array are extracted from
the `stat' structure as returned by `fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note FStat
Intrinsic (function)::.


File: g77.info,  Node: FStat Intrinsic (function),  Next: FTell Intrinsic (subroutine),  Prev: FStat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

FStat Intrinsic (function)
..........................

     FStat(UNIT, SARRAY)

FStat: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the file open on Fortran I/O unit UNIT and places
them in the array SARRAY.  The values in this array are extracted from
the `stat' structure as returned by `fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code.

   For information on other intrinsics with the same name: *Note FStat
Intrinsic (subroutine)::.


File: g77.info,  Node: FTell Intrinsic (subroutine),  Next: FTell Intrinsic (function),  Prev: FStat Intrinsic (function),  Up: Table of Intrinsic Functions

FTell Intrinsic (subroutine)
............................

     CALL FTell(UNIT, OFFSET)

UNIT: `INTEGER'; scalar; INTENT(IN).

OFFSET: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets OFFSET to the current offset of Fortran unit UNIT (or to -1 if
UNIT is not open).

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note FTell
Intrinsic (function)::.


File: g77.info,  Node: FTell Intrinsic (function),  Next: GError Intrinsic,  Prev: FTell Intrinsic (subroutine),  Up: Table of Intrinsic Functions

FTell Intrinsic (function)
..........................

     FTell(UNIT)

FTell: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the current offset of Fortran unit UNIT (or -1 if UNIT is
not open).

   For information on other intrinsics with the same name: *Note FTell
Intrinsic (subroutine)::.


File: g77.info,  Node: GError Intrinsic,  Next: GetArg Intrinsic,  Prev: FTell Intrinsic (function),  Up: Table of Intrinsic Functions

GError Intrinsic
................

     CALL GError(MESSAGE)

MESSAGE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the system error message corresponding to the last system
error (C `errno').


File: g77.info,  Node: GetArg Intrinsic,  Next: GetCWD Intrinsic (subroutine),  Prev: GError Intrinsic,  Up: Table of Intrinsic Functions

GetArg Intrinsic
................

     CALL GetArg(POS, VALUE)

POS: `INTEGER'; scalar; INTENT(IN).

VALUE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets VALUE to the POS-th command-line argument (or to all blanks if
there are fewer than VALUE command-line arguments); `CALL GETARG(0,
VALUE)' sets VALUE to the name of the program (on systems that support
this feature).

   *Note IArgC Intrinsic::, for information on how to get the number of
arguments.


File: g77.info,  Node: GetCWD Intrinsic (subroutine),  Next: GetCWD Intrinsic (function),  Prev: GetArg Intrinsic,  Up: Table of Intrinsic Functions

GetCWD Intrinsic (subroutine)
.............................

     CALL GetCWD(NAME, STATUS)

NAME: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Places the current working directory in NAME.  If the STATUS
argument is supplied, it contains 0 success or a non-zero error code
upon return (`ENOSYS' if the system does not provide `getcwd(3)' or
`getwd(3)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note GetCWD
Intrinsic (function)::.


File: g77.info,  Node: GetCWD Intrinsic (function),  Next: GetEnv Intrinsic,  Prev: GetCWD Intrinsic (subroutine),  Up: Table of Intrinsic Functions

GetCWD Intrinsic (function)
...........................

     GetCWD(NAME)

GetCWD: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Places the current working directory in NAME.  Returns 0 on success,
otherwise a non-zero error code (`ENOSYS' if the system does not
provide `getcwd(3)' or `getwd(3)').

   For information on other intrinsics with the same name: *Note GetCWD
Intrinsic (subroutine)::.


File: g77.info,  Node: GetEnv Intrinsic,  Next: GetGId Intrinsic,  Prev: GetCWD Intrinsic (function),  Up: Table of Intrinsic Functions

GetEnv Intrinsic
................

     CALL GetEnv(NAME, VALUE)

NAME: `CHARACTER'; scalar; INTENT(IN).

VALUE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets VALUE to the value of environment variable given by the value
of NAME (`$name' in shell terms) or to blanks if `$name' has not been
set.  A null character (`CHAR(0)') marks the end of the name in
NAME--otherwise, trailing blanks in NAME are ignored.


File: g77.info,  Node: GetGId Intrinsic,  Next: GetLog Intrinsic,  Prev: GetEnv Intrinsic,  Up: Table of Intrinsic Functions

GetGId Intrinsic
................

     GetGId()

GetGId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the group id for the current process.


File: g77.info,  Node: GetLog Intrinsic,  Next: GetPId Intrinsic,  Prev: GetGId Intrinsic,  Up: Table of Intrinsic Functions

GetLog Intrinsic
................

     CALL GetLog(LOGIN)

LOGIN: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the login name for the process in LOGIN.

   *Caution:* On some systems, the `getlogin(3)' function, which this
intrinsic calls at run time, is either not implemented or returns a
null pointer.  In the latter case, this intrinsic returns blanks in
LOGIN.


File: g77.info,  Node: GetPId Intrinsic,  Next: GetUId Intrinsic,  Prev: GetLog Intrinsic,  Up: Table of Intrinsic Functions

GetPId Intrinsic
................

     GetPId()

GetPId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the process id for the current process.


File: g77.info,  Node: GetUId Intrinsic,  Next: GMTime Intrinsic,  Prev: GetPId Intrinsic,  Up: Table of Intrinsic Functions

GetUId Intrinsic
................

     GetUId()

GetUId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the user id for the current process.


File: g77.info,  Node: GMTime Intrinsic,  Next: HostNm Intrinsic (subroutine),  Prev: GetUId Intrinsic,  Up: Table of Intrinsic Functions

GMTime Intrinsic
................

     CALL GMTime(STIME, TARRAY)

STIME: `INTEGER(KIND=1)'; scalar; INTENT(IN).

TARRAY: `INTEGER(KIND=1)'; DIMENSION(9); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Given a system time value STIME, fills TARRAY with values extracted
from it appropriate to the GMT time zone using `gmtime(3)'.

   The array elements are as follows:

  1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
     seconds

  2. Minutes after the hour, range 0-59

  3. Hours past midnight, range 0-23

  4. Day of month, range 0-31

  5. Number of months since January, range 0-12

  6. Years since 1900

  7. Number of days since Sunday, range 0-6

  8. Days since January 1

  9. Daylight savings indicator: positive if daylight savings is in
     effect, zero if not, and negative if the information isn't
     available.


File: g77.info,  Node: HostNm Intrinsic (subroutine),  Next: HostNm Intrinsic (function),  Prev: GMTime Intrinsic,  Up: Table of Intrinsic Functions

HostNm Intrinsic (subroutine)
.............................

     CALL HostNm(NAME, STATUS)

NAME: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills NAME with the system's host name returned by `gethostname(2)'.
If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return (`ENOSYS' if the system does not
provide `gethostname(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note HostNm
Intrinsic (function)::.


File: g77.info,  Node: HostNm Intrinsic (function),  Next: Huge Intrinsic,  Prev: HostNm Intrinsic (subroutine),  Up: Table of Intrinsic Functions

HostNm Intrinsic (function)
...........................

     HostNm(NAME)

HostNm: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills NAME with the system's host name returned by `gethostname(2)',
returning 0 on success or a non-zero error code (`ENOSYS' if the system
does not provide `gethostname(2)').

   For information on other intrinsics with the same name: *Note HostNm
Intrinsic (subroutine)::.


File: g77.info,  Node: Huge Intrinsic,  Next: IAbs Intrinsic,  Prev: HostNm Intrinsic (function),  Up: Table of Intrinsic Functions

Huge Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Huge' to use this name for an
external procedure.


File: g77.info,  Node: IAbs Intrinsic,  Next: IAChar Intrinsic,  Prev: Huge Intrinsic,  Up: Table of Intrinsic Functions

IAbs Intrinsic
..............

     IAbs(A)

IAbs: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77.info,  Node: IAChar Intrinsic,  Next: IAnd Intrinsic,  Prev: IAbs Intrinsic,  Up: Table of Intrinsic Functions

IAChar Intrinsic
................

     IAChar(C)

IAChar: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `f90'.

Description:

   Returns the code for the ASCII character in the first character
position of C.

   *Note AChar Intrinsic::, for the inverse of this function.

   *Note IChar Intrinsic::, for the function corresponding to the
system's native character set.


File: g77.info,  Node: IAnd Intrinsic,  Next: IArgC Intrinsic,  Prev: IAChar Intrinsic,  Up: Table of Intrinsic Functions

IAnd Intrinsic
..............

     IAnd(I, J)

IAnd: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean AND of pair of bits in each of
I and J.


File: g77.info,  Node: IArgC Intrinsic,  Next: IBClr Intrinsic,  Prev: IAnd Intrinsic,  Up: Table of Intrinsic Functions

IArgC Intrinsic
...............

     IArgC()

IArgC: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of command-line arguments.

   This count does not include the specification of the program name
itself.


File: g77.info,  Node: IBClr Intrinsic,  Next: IBits Intrinsic,  Prev: IArgC Intrinsic,  Up: Table of Intrinsic Functions

IBClr Intrinsic
...............

     IBClr(I, POS)

IBClr: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns the value of I with bit POS cleared (set to zero).  *Note
BTest Intrinsic:: for information on bit positions.


File: g77.info,  Node: IBits Intrinsic,  Next: IBSet Intrinsic,  Prev: IBClr Intrinsic,  Up: Table of Intrinsic Functions

IBits Intrinsic
...............

     IBits(I, POS, LEN)

IBits: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

LEN: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Extracts a subfield of length LEN from I, starting from bit position
POS and extending left for LEN bits.  The result is right-justified and
the remaining bits are zeroed.  The value of `POS+LEN' must be less
than or equal to the value `BIT_SIZE(I)'.  *Note Bit_Size Intrinsic::.


File: g77.info,  Node: IBSet Intrinsic,  Next: IChar Intrinsic,  Prev: IBits Intrinsic,  Up: Table of Intrinsic Functions

IBSet Intrinsic
...............

     IBSet(I, POS)

IBSet: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns the value of I with bit POS set (to one).  *Note BTest
Intrinsic:: for information on bit positions.


File: g77.info,  Node: IChar Intrinsic,  Next: IDate Intrinsic (UNIX),  Prev: IBSet Intrinsic,  Up: Table of Intrinsic Functions

IChar Intrinsic
...............

     IChar(C)

IChar: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the code for the character in the first character position
of C.

   Because the system's native character set is used, the
correspondence between character and their codes is not necessarily the
same between GNU Fortran implementations.

   Note that no intrinsic exists to convert a printable character
string to a numerical value.  For example, there is no intrinsic that,
given the `CHARACTER' value `'154'', returns an `INTEGER' or `REAL'
value with the value `154'.

   Instead, you can use internal-file I/O to do this kind of conversion.
For example:

     INTEGER VALUE
     CHARACTER*10 STRING
     STRING = '154'
     READ (STRING, '(I10)'), VALUE
     PRINT *, VALUE
     END

   The above program, when run, prints:

      154

   *Note Char Intrinsic::, for the inverse of the `ICHAR' function.

   *Note IAChar Intrinsic::, for the function corresponding to the
ASCII character set.


File: g77.info,  Node: IDate Intrinsic (UNIX),  Next: IDiM Intrinsic,  Prev: IChar Intrinsic,  Up: Table of Intrinsic Functions

IDate Intrinsic (UNIX)
......................

     CALL IDate(TARRAY)

TARRAY: `INTEGER(KIND=1)'; DIMENSION(3); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills TARRAY with the numerical values at the current local time of
day, month (in the range 1-12), and year in elements 1, 2, and 3,
respectively.  The year has four significant digits.

   For information on other intrinsics with the same name: *Note IDate
Intrinsic (VXT)::.


File: g77.info,  Node: IDiM Intrinsic,  Next: IDInt Intrinsic,  Prev: IDate Intrinsic (UNIX),  Up: Table of Intrinsic Functions

IDiM Intrinsic
..............

     IDiM(X, Y)

IDiM: `INTEGER(KIND=1)' function.

X: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Y: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `DIM()' that is specific to one type for X and Y.
*Note DiM Intrinsic::.


File: g77.info,  Node: IDInt Intrinsic,  Next: IDNInt Intrinsic,  Prev: IDiM Intrinsic,  Up: Table of Intrinsic Functions

IDInt Intrinsic
...............

     IDInt(A)

IDInt: `INTEGER(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.


File: g77.info,  Node: IDNInt Intrinsic,  Next: IEOr Intrinsic,  Prev: IDInt Intrinsic,  Up: Table of Intrinsic Functions

IDNInt Intrinsic
................

     IDNInt(A)

IDNInt: `INTEGER(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `NINT()' that is specific to one type for A.  *Note
NInt Intrinsic::.


File: g77.info,  Node: IEOr Intrinsic,  Next: IErrNo Intrinsic,  Prev: IDNInt Intrinsic,  Up: Table of Intrinsic Functions

IEOr Intrinsic
..............

     IEOr(I, J)

IEOr: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean exclusive-OR of pair of bits in
each of I and J.


File: g77.info,  Node: IErrNo Intrinsic,  Next: IFix Intrinsic,  Prev: IEOr Intrinsic,  Up: Table of Intrinsic Functions

IErrNo Intrinsic
................

     IErrNo()

IErrNo: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the last system error number (corresponding to the C
`errno').


File: g77.info,  Node: IFix Intrinsic,  Next: Imag Intrinsic,  Prev: IErrNo Intrinsic,  Up: Table of Intrinsic Functions

IFix Intrinsic
..............

     IFix(A)

IFix: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.


File: g77.info,  Node: Imag Intrinsic,  Next: ImagPart Intrinsic,  Prev: IFix Intrinsic,  Up: Table of Intrinsic Functions

Imag Intrinsic
..............

     Imag(Z)

Imag: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   The imaginary part of Z is returned, without conversion.

   *Note:* The way to do this in standard Fortran 90 is `AIMAG(Z)'.
However, when, for example, Z is `DOUBLE COMPLEX', `AIMAG(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `IMAG()' is that, while not necessarily more or
less portable than `AIMAG()', it is more likely to cause a compiler
that doesn't support it to produce a diagnostic than generate incorrect
code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77.info,  Node: ImagPart Intrinsic,  Next: Index Intrinsic,  Prev: Imag Intrinsic,  Up: Table of Intrinsic Functions

ImagPart Intrinsic
..................

     ImagPart(Z)

ImagPart: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   The imaginary part of Z is returned, without conversion.

   *Note:* The way to do this in standard Fortran 90 is `AIMAG(Z)'.
However, when, for example, Z is `DOUBLE COMPLEX', `AIMAG(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `IMAGPART()' is that, while not necessarily more or
less portable than `AIMAG()', it is more likely to cause a compiler
that doesn't support it to produce a diagnostic than generate incorrect
code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77.info,  Node: Index Intrinsic,  Next: Int Intrinsic,  Prev: ImagPart Intrinsic,  Up: Table of Intrinsic Functions

Index Intrinsic
...............

     Index(STRING, SUBSTRING)

Index: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

SUBSTRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the position of the start of the first occurrence of string
SUBSTRING as a substring in STRING, counting from one.  If SUBSTRING
doesn't occur in STRING, zero is returned.


File: g77.info,  Node: Int Intrinsic,  Next: Int2 Intrinsic,  Prev: Index Intrinsic,  Up: Table of Intrinsic Functions

Int Intrinsic
.............

     Int(A)

Int: `INTEGER(KIND=1)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=1)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disregarded.

   *Note NInt Intrinsic::, for how to convert, rounded to nearest whole
number.

   *Note AInt Intrinsic::, for how to truncate to whole number without
converting.


File: g77.info,  Node: Int2 Intrinsic,  Next: Int8 Intrinsic,  Prev: Int Intrinsic,  Up: Table of Intrinsic Functions

Int2 Intrinsic
..............

     Int2(A)

Int2: `INTEGER(KIND=6)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=6)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77.info,  Node: Int8 Intrinsic,  Next: IOr Intrinsic,  Prev: Int2 Intrinsic,  Up: Table of Intrinsic Functions

Int8 Intrinsic
..............

     Int8(A)

Int8: `INTEGER(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=2)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77.info,  Node: IOr Intrinsic,  Next: IRand Intrinsic,  Prev: Int8 Intrinsic,  Up: Table of Intrinsic Functions

IOr Intrinsic
.............

     IOr(I, J)

IOr: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean OR of pair of bits in each of I
and J.


File: g77.info,  Node: IRand Intrinsic,  Next: IsaTty Intrinsic,  Prev: IOr Intrinsic,  Up: Table of Intrinsic Functions

IRand Intrinsic
...............

     IRand(FLAG)

IRand: `INTEGER(KIND=1)' function.

FLAG: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns a uniform quasi-random number up to a system-dependent limit.
If FLAG is 0, the next number in sequence is returned; if FLAG is 1,
the generator is restarted by calling the UNIX function `srand(0)'; if
FLAG has any other value, it is used as a new seed with `srand()'.

   *Note SRand Intrinsic::.

   *Note:* As typically implemented (by the routine of the same name in
the C library), this random number generator is a very poor one, though
the BSD and GNU libraries provide a much better implementation than the
`traditional' one.  On a different system you almost certainly want to
use something better.


File: g77.info,  Node: IsaTty Intrinsic,  Next: IShft Intrinsic,  Prev: IRand Intrinsic,  Up: Table of Intrinsic Functions

IsaTty Intrinsic
................

     IsaTty(UNIT)

IsaTty: `LOGICAL(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns `.TRUE.' if and only if the Fortran I/O unit specified by
UNIT is connected to a terminal device.  See `isatty(3)'.


File: g77.info,  Node: IShft Intrinsic,  Next: IShftC Intrinsic,  Prev: IsaTty Intrinsic,  Up: Table of Intrinsic Functions

IShft Intrinsic
...............

     IShft(I, SHIFT)

IShft: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   All bits representing I are shifted SHIFT places.  `SHIFT.GT.0'
indicates a left shift, `SHIFT.EQ.0' indicates no shift and
`SHIFT.LT.0' indicates a right shift.  If the absolute value of the
shift count is greater than `BIT_SIZE(I)', the result is undefined.
Bits shifted out from the left end or the right end, as the case may be,
are lost.  Zeros are shifted in from the opposite end.

   *Note IShftC Intrinsic:: for the circular-shift equivalent.


File: g77.info,  Node: IShftC Intrinsic,  Next: ISign Intrinsic,  Prev: IShft Intrinsic,  Up: Table of Intrinsic Functions

IShftC Intrinsic
................

     IShftC(I, SHIFT, SIZE)

IShftC: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

SIZE: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   The rightmost SIZE bits of the argument I are shifted circularly
SHIFT places, i.e. the bits shifted out of one end are shifted into the
opposite end.  No bits are lost.  The unshifted bits of the result are
the same as the unshifted bits of I.  The  absolute value of the
argument SHIFT must be less than or equal to SIZE.  The value of SIZE
must be greater than or equal to one and less than or equal to
`BIT_SIZE(I)'.

   *Note IShft Intrinsic:: for the logical shift equivalent.


File: g77.info,  Node: ISign Intrinsic,  Next: ITime Intrinsic,  Prev: IShftC Intrinsic,  Up: Table of Intrinsic Functions

ISign Intrinsic
...............

     ISign(A, B)

ISign: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; scalar; INTENT(IN).

B: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIGN()' that is specific to one type for A and B.
*Note Sign Intrinsic::.


File: g77.info,  Node: ITime Intrinsic,  Next: Kill Intrinsic (subroutine),  Prev: ISign Intrinsic,  Up: Table of Intrinsic Functions

ITime Intrinsic
...............

     CALL ITime(TARRAY)

TARRAY: `INTEGER(KIND=1)'; DIMENSION(3); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the current local time hour, minutes, and seconds in elements
1, 2, and 3 of TARRAY, respectively.


File: g77.info,  Node: Kill Intrinsic (subroutine),  Next: Kind Intrinsic,  Prev: ITime Intrinsic,  Up: Table of Intrinsic Functions

Kill Intrinsic (subroutine)
...........................

     CALL Kill(PID, SIGNAL, STATUS)

PID: `INTEGER'; scalar; INTENT(IN).

SIGNAL: `INTEGER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sends the signal specified by SIGNAL to the process PID.  If the
STATUS argument is supplied, it contains 0 on success or a non-zero
error code upon return.  See `kill(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Kill
Intrinsic (function)::.


File: g77.info,  Node: Kind Intrinsic,  Next: LBound Intrinsic,  Prev: Kill Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Kind Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Kind' to use this name for an
external procedure.


File: g77.info,  Node: LBound Intrinsic,  Next: Len Intrinsic,  Prev: Kind Intrinsic,  Up: Table of Intrinsic Functions

LBound Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL LBound' to use this name for an
external procedure.


File: g77.info,  Node: Len Intrinsic,  Next: Len_Trim Intrinsic,  Prev: LBound Intrinsic,  Up: Table of Intrinsic Functions

Len Intrinsic
.............

     Len(STRING)

Len: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar.

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the length of STRING.

   If STRING is an array, the length of an element of STRING is
returned.

   Note that STRING need not be defined when this intrinsic is invoked,
since only the length, not the content, of STRING is needed.

   *Note Bit_Size Intrinsic::, for the function that determines the
size of its argument in bits.


File: g77.info,  Node: Len_Trim Intrinsic,  Next: LGe Intrinsic,  Prev: Len Intrinsic,  Up: Table of Intrinsic Functions

Len_Trim Intrinsic
..................

     Len_Trim(STRING)

Len_Trim: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `f90'.

Description:

   Returns the index of the last non-blank character in STRING.
`LNBLNK' and `LEN_TRIM' are equivalent.


File: g77.info,  Node: LGe Intrinsic,  Next: LGt Intrinsic,  Prev: Len_Trim Intrinsic,  Up: Table of Intrinsic Functions

LGe Intrinsic
.............

     LGe(STRING_A, STRING_B)

LGe: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.GE.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   The lexical comparison intrinsics `LGe', `LGt', `LLe', and `LLt'
differ from the corresponding intrinsic operators `.GE.', `.GT.',
`.LE.', `.LT.'.  Because the ASCII collating sequence is assumed, the
following expressions always return `.TRUE.':

     LGE ('0', ' ')
     LGE ('A', '0')
     LGE ('a', 'A')

   The following related expressions do *not* always return `.TRUE.',
as they are not necessarily evaluated assuming the arguments use ASCII
encoding:

     '0' .GE. ' '
     'A' .GE. '0'
     'a' .GE. 'A'

   The same difference exists between `LGt' and `.GT.'; between `LLe'
and `.LE.'; and between `LLt' and `.LT.'.


File: g77.info,  Node: LGt Intrinsic,  Next: Link Intrinsic (subroutine),  Prev: LGe Intrinsic,  Up: Table of Intrinsic Functions

LGt Intrinsic
.............

     LGt(STRING_A, STRING_B)

LGt: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.GT.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LGT' intrinsic and the `.GT.'  operator.


File: g77.info,  Node: Link Intrinsic (subroutine),  Next: LLe Intrinsic,  Prev: LGt Intrinsic,  Up: Table of Intrinsic Functions

Link Intrinsic (subroutine)
...........................

     CALL Link(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Makes a (hard) link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return.  See `link(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Link
Intrinsic (function)::.


File: g77.info,  Node: LLe Intrinsic,  Next: LLt Intrinsic,  Prev: Link Intrinsic (subroutine),  Up: Table of Intrinsic Functions

LLe Intrinsic
.............

     LLe(STRING_A, STRING_B)

LLe: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.LE.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LLE' intrinsic and the `.LE.'  operator.


File: g77.info,  Node: LLt Intrinsic,  Next: LnBlnk Intrinsic,  Prev: LLe Intrinsic,  Up: Table of Intrinsic Functions

LLt Intrinsic
.............

     LLt(STRING_A, STRING_B)

LLt: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.LT.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LLT' intrinsic and the `.LT.'  operator.


File: g77.info,  Node: LnBlnk Intrinsic,  Next: Loc Intrinsic,  Prev: LLt Intrinsic,  Up: Table of Intrinsic Functions

LnBlnk Intrinsic
................

     LnBlnk(STRING)

LnBlnk: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the index of the last non-blank character in STRING.
`LNBLNK' and `LEN_TRIM' are equivalent.


File: g77.info,  Node: Loc Intrinsic,  Next: Log Intrinsic,  Prev: LnBlnk Intrinsic,  Up: Table of Intrinsic Functions

Loc Intrinsic
.............

     Loc(ENTITY)

Loc: `INTEGER(KIND=7)' function.

ENTITY: Any type; cannot be a constant or expression.

Intrinsic groups: `unix'.

Description:

   The `LOC()' intrinsic works the same way as the `%LOC()' construct.
*Note The `%LOC()' Construct: %LOC(), for more information.


File: g77.info,  Node: Log Intrinsic,  Next: Log10 Intrinsic,  Prev: Loc Intrinsic,  Up: Table of Intrinsic Functions

Log Intrinsic
.............

     Log(X)

Log: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the natural logarithm of X, which must be greater than zero
or, if type `COMPLEX', must not be zero.

   *Note Exp Intrinsic::, for the inverse of this function.

   *Note Log10 Intrinsic::, for the base-10 logarithm function.


File: g77.info,  Node: Log10 Intrinsic,  Next: Logical Intrinsic,  Prev: Log Intrinsic,  Up: Table of Intrinsic Functions

Log10 Intrinsic
...............

     Log10(X)

Log10: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the natural logarithm of X, which must be greater than zero
or, if type `COMPLEX', must not be zero.

   The inverse of this function is `10. ** LOG10(X)'.

   *Note Log Intrinsic::, for the natural logarithm function.


File: g77.info,  Node: Logical Intrinsic,  Next: Long Intrinsic,  Prev: Log10 Intrinsic,  Up: Table of Intrinsic Functions

Logical Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Logical' to use this name for
an external procedure.


File: g77.info,  Node: Long Intrinsic,  Next: LShift Intrinsic,  Prev: Logical Intrinsic,  Up: Table of Intrinsic Functions

Long Intrinsic
..............

     Long(A)

Long: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=6)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77.info,  Node: LShift Intrinsic,  Next: LStat Intrinsic (subroutine),  Prev: Long Intrinsic,  Up: Table of Intrinsic Functions

LShift Intrinsic
................

     LShift(I, SHIFT)

LShift: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns I shifted to the left SHIFT bits.

   Although similar to the expression `I*(2**SHIFT)', there are
important differences.  For example, the sign of the result is not
necessarily the same as the sign of I.

   Currently this intrinsic is defined assuming the underlying
representation of I is as a two's-complement integer.  It is unclear at
this point whether that definition will apply when a different
representation is involved.

   *Note LShift Intrinsic::, for the inverse of this function.

   *Note IShft Intrinsic::, for information on a more widely available
left-shifting intrinsic that is also more precisely defined.


File: g77.info,  Node: LStat Intrinsic (subroutine),  Next: LStat Intrinsic (function),  Prev: LShift Intrinsic,  Up: Table of Intrinsic Functions

LStat Intrinsic (subroutine)
............................

     CALL LStat(FILE, SARRAY, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  If FILE is a
symbolic link it returns data on the link itself, so the routine is
available only on systems that support symbolic links.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return (`ENOSYS' if the system does not
provide `lstat(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note LStat
Intrinsic (function)::.


File: g77.info,  Node: LStat Intrinsic (function),  Next: LTime Intrinsic,  Prev: LStat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

LStat Intrinsic (function)
..........................

     LStat(FILE, SARRAY)

LStat: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  If FILE is a
symbolic link it returns data on the link itself, so the routine is
available only on systems that support symbolic links.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code (`ENOSYS' if the
system does not provide `lstat(2)').

   For information on other intrinsics with the same name: *Note LStat
Intrinsic (subroutine)::.


File: g77.info,  Node: LTime Intrinsic,  Next: MatMul Intrinsic,  Prev: LStat Intrinsic (function),  Up: Table of Intrinsic Functions

LTime Intrinsic
...............

     CALL LTime(STIME, TARRAY)

STIME: `INTEGER(KIND=1)'; scalar; INTENT(IN).

TARRAY: `INTEGER(KIND=1)'; DIMENSION(9); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Given a system time value STIME, fills TARRAY with values extracted
from it appropriate to the GMT time zone using `localtime(3)'.

   The array elements are as follows:

  1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
     seconds

  2. Minutes after the hour, range 0-59

  3. Hours past midnight, range 0-23

  4. Day of month, range 0-31

  5. Number of months since January, range 0-12

  6. Years since 1900

  7. Number of days since Sunday, range 0-6

  8. Days since January 1

  9. Daylight savings indicator: positive if daylight savings is in
     effect, zero if not, and negative if the information isn't
     available.


File: g77.info,  Node: MatMul Intrinsic,  Next: Max Intrinsic,  Prev: LTime Intrinsic,  Up: Table of Intrinsic Functions

MatMul Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MatMul' to use this name for an
external procedure.


File: g77.info,  Node: Max Intrinsic,  Next: Max0 Intrinsic,  Prev: MatMul Intrinsic,  Up: Table of Intrinsic Functions

Max Intrinsic
.............

     Max(A-1, A-2, ..., A-n)

Max: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the argument with the largest value.

   *Note Min Intrinsic::, for the opposite function.


File: g77.info,  Node: Max0 Intrinsic,  Next: Max1 Intrinsic,  Prev: Max Intrinsic,  Up: Table of Intrinsic Functions

Max0 Intrinsic
..............

     Max0(A-1, A-2, ..., A-n)

Max0: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77.info,  Node: Max1 Intrinsic,  Next: MaxExponent Intrinsic,  Prev: Max0 Intrinsic,  Up: Table of Intrinsic Functions

Max1 Intrinsic
..............

     Max1(A-1, A-2, ..., A-n)

Max1: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A and a
different return type.  *Note Max Intrinsic::.


File: g77.info,  Node: MaxExponent Intrinsic,  Next: MaxLoc Intrinsic,  Prev: Max1 Intrinsic,  Up: Table of Intrinsic Functions

MaxExponent Intrinsic
.....................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxExponent' to use this name
for an external procedure.


File: g77.info,  Node: MaxLoc Intrinsic,  Next: MaxVal Intrinsic,  Prev: MaxExponent Intrinsic,  Up: Table of Intrinsic Functions

MaxLoc Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxLoc' to use this name for an
external procedure.


File: g77.info,  Node: MaxVal Intrinsic,  Next: MClock Intrinsic,  Prev: MaxLoc Intrinsic,  Up: Table of Intrinsic Functions

MaxVal Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxVal' to use this name for an
external procedure.


File: g77.info,  Node: MClock Intrinsic,  Next: MClock8 Intrinsic,  Prev: MaxVal Intrinsic,  Up: Table of Intrinsic Functions

MClock Intrinsic
................

     MClock()

MClock: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of clock ticks since the start of the process.
Supported on systems with `clock(3)' (q.v.).

   This intrinsic is not fully portable, such as to systems with 32-bit
`INTEGER' types but supporting times wider than 32 bits.  *Note MClock8
Intrinsic::, for information on a similar intrinsic that might be
portable to more GNU Fortran implementations, though to fewer Fortran
compilers.

   If the system does not support `clock(3)', -1 is returned.


File: g77.info,  Node: MClock8 Intrinsic,  Next: Merge Intrinsic,  Prev: MClock Intrinsic,  Up: Table of Intrinsic Functions

MClock8 Intrinsic
.................

     MClock8()

MClock8: `INTEGER(KIND=2)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of clock ticks since the start of the process.
Supported on systems with `clock(3)' (q.v.).

   No Fortran implementations other than GNU Fortran are known to
support this intrinsic at the time of this writing.  *Note MClock
Intrinsic::, for information on a similar intrinsic that might be
portable to more Fortran compilers, though to fewer GNU Fortran
implementations.

   If the system does not support `clock(3)', -1 is returned.


File: g77.info,  Node: Merge Intrinsic,  Next: Min Intrinsic,  Prev: MClock8 Intrinsic,  Up: Table of Intrinsic Functions

Merge Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Merge' to use this name for an
external procedure.


File: g77.info,  Node: Min Intrinsic,  Next: Min0 Intrinsic,  Prev: Merge Intrinsic,  Up: Table of Intrinsic Functions

Min Intrinsic
.............

     Min(A-1, A-2, ..., A-n)

Min: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the argument with the smallest value.

   *Note Max Intrinsic::, for the opposite function.


File: g77.info,  Node: Min0 Intrinsic,  Next: Min1 Intrinsic,  Prev: Min Intrinsic,  Up: Table of Intrinsic Functions

Min0 Intrinsic
..............

     Min0(A-1, A-2, ..., A-n)

Min0: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77.info,  Node: Min1 Intrinsic,  Next: MinExponent Intrinsic,  Prev: Min0 Intrinsic,  Up: Table of Intrinsic Functions

Min1 Intrinsic
..............

     Min1(A-1, A-2, ..., A-n)

Min1: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A and a
different return type.  *Note Min Intrinsic::.


File: g77.info,  Node: MinExponent Intrinsic,  Next: MinLoc Intrinsic,  Prev: Min1 Intrinsic,  Up: Table of Intrinsic Functions

MinExponent Intrinsic
.....................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinExponent' to use this name
for an external procedure.


File: g77.info,  Node: MinLoc Intrinsic,  Next: MinVal Intrinsic,  Prev: MinExponent Intrinsic,  Up: Table of Intrinsic Functions

MinLoc Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinLoc' to use this name for an
external procedure.


File: g77.info,  Node: MinVal Intrinsic,  Next: Mod Intrinsic,  Prev: MinLoc Intrinsic,  Up: Table of Intrinsic Functions

MinVal Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinVal' to use this name for an
external procedure.


File: g77.info,  Node: Mod Intrinsic,  Next: Modulo Intrinsic,  Prev: MinVal Intrinsic,  Up: Table of Intrinsic Functions

Mod Intrinsic
.............

     Mod(A, P)

Mod: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; scalar; INTENT(IN).

P: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns remainder calculated as:

     A - (INT(A / P) * P)

   P must not be zero.


File: g77.info,  Node: Modulo Intrinsic,  Next: MvBits Intrinsic,  Prev: Mod Intrinsic,  Up: Table of Intrinsic Functions

Modulo Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Modulo' to use this name for an
external procedure.


File: g77.info,  Node: MvBits Intrinsic,  Next: Nearest Intrinsic,  Prev: Modulo Intrinsic,  Up: Table of Intrinsic Functions

MvBits Intrinsic
................

     CALL MvBits(FROM, FROMPOS, LEN, TO, TOPOS)

FROM: `INTEGER'; scalar; INTENT(IN).

FROMPOS: `INTEGER'; scalar; INTENT(IN).

LEN: `INTEGER'; scalar; INTENT(IN).

TO: `INTEGER' with same `KIND=' value as for FROM; scalar;
INTENT(INOUT).

TOPOS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Moves LEN bits from positions FROMPOS through `FROMPOS+LEN-1' of
FROM to positions TOPOS through `FROMPOS+LEN-1' of TO.  The portion of
argument TO not affected by the movement of bits is unchanged.
Arguments FROM and TO are permitted to be the same numeric storage
unit.  The values of `FROMPOS+LEN' and `TOPOS+LEN' must be less than or
equal to `BIT_SIZE(FROM)'.


File: g77.info,  Node: Nearest Intrinsic,  Next: NInt Intrinsic,  Prev: MvBits Intrinsic,  Up: Table of Intrinsic Functions

Nearest Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Nearest' to use this name for
an external procedure.


File: g77.info,  Node: NInt Intrinsic,  Next: Not Intrinsic,  Prev: Nearest Intrinsic,  Up: Table of Intrinsic Functions

NInt Intrinsic
..............

     NInt(A)

NInt: `INTEGER(KIND=1)' function.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude eliminated by
rounding to the nearest whole number and with its sign preserved,
converted to type `INTEGER(KIND=1)'.

   If A is type `COMPLEX', its real part is rounded and converted.

   A fractional portion exactly equal to `.5' is rounded to the whole
number that is larger in magnitude.  (Also called "Fortran round".)

   *Note Int Intrinsic::, for how to convert, truncate to whole number.

   *Note ANInt Intrinsic::, for how to round to nearest whole number
without converting.


File: g77.info,  Node: Not Intrinsic,  Next: Or Intrinsic,  Prev: NInt Intrinsic,  Up: Table of Intrinsic Functions

Not Intrinsic
.............

     Not(I)

Not: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean NOT of each bit in I.


File: g77.info,  Node: Or Intrinsic,  Next: Pack Intrinsic,  Prev: Not Intrinsic,  Up: Table of Intrinsic Functions

Or Intrinsic
............

     Or(I, J)

Or: `INTEGER' or `LOGICAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean OR of pair of bits in each of I
and J.


File: g77.info,  Node: Pack Intrinsic,  Next: PError Intrinsic,  Prev: Or Intrinsic,  Up: Table of Intrinsic Functions

Pack Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Pack' to use this name for an
external procedure.


File: g77.info,  Node: PError Intrinsic,  Next: Precision Intrinsic,  Prev: Pack Intrinsic,  Up: Table of Intrinsic Functions

PError Intrinsic
................

     CALL PError(STRING)

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Prints (on the C `stderr' stream) a newline-terminated error message
corresponding to the last system error.  This is prefixed by STRING, a
colon and a space.  See `perror(3)'.


File: g77.info,  Node: Precision Intrinsic,  Next: Present Intrinsic,  Prev: PError Intrinsic,  Up: Table of Intrinsic Functions

Precision Intrinsic
...................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Precision' to use this name
for an external procedure.


File: g77.info,  Node: Present Intrinsic,  Next: Product Intrinsic,  Prev: Precision Intrinsic,  Up: Table of Intrinsic Functions

Present Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Present' to use this name for
an external procedure.


File: g77.info,  Node: Product Intrinsic,  Next: Radix Intrinsic,  Prev: Present Intrinsic,  Up: Table of Intrinsic Functions

Product Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Product' to use this name for
an external procedure.


File: g77.info,  Node: Radix Intrinsic,  Next: Rand Intrinsic,  Prev: Product Intrinsic,  Up: Table of Intrinsic Functions

Radix Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Radix' to use this name for an
external procedure.


File: g77.info,  Node: Rand Intrinsic,  Next: Random_Number Intrinsic,  Prev: Radix Intrinsic,  Up: Table of Intrinsic Functions

Rand Intrinsic
..............

     Rand(FLAG)

Rand: `REAL(KIND=1)' function.

FLAG: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns a uniform quasi-random number between 0 and 1.  If FLAG is
0, the next number in sequence is returned; if FLAG is 1, the generator
is restarted by calling `srand(0)'; if FLAG has any other value, it is
used as a new seed with `srand'.

   *Note SRand Intrinsic::.

   *Note:* As typically implemented (by the routine of the same name in
the C library), this random number generator is a very poor one, though
the BSD and GNU libraries provide a much better implementation than the
`traditional' one.  On a different system you almost certainly want to
use something better.


File: g77.info,  Node: Random_Number Intrinsic,  Next: Random_Seed Intrinsic,  Prev: Rand Intrinsic,  Up: Table of Intrinsic Functions

Random_Number Intrinsic
.......................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Random_Number' to use this
name for an external procedure.


File: g77.info,  Node: Random_Seed Intrinsic,  Next: Range Intrinsic,  Prev: Random_Number Intrinsic,  Up: Table of Intrinsic Functions

Random_Seed Intrinsic
.....................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Random_Seed' to use this name
for an external procedure.


File: g77.info,  Node: Range Intrinsic,  Next: Real Intrinsic,  Prev: Random_Seed Intrinsic,  Up: Table of Intrinsic Functions

Range Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Range' to use this name for an
external procedure.


File: g77.info,  Node: Real Intrinsic,  Next: RealPart Intrinsic,  Prev: Range Intrinsic,  Up: Table of Intrinsic Functions

Real Intrinsic
..............

     Real(A)

Real: `REAL' function.  The exact type is `REAL(KIND=1)' when argument
A is any type other than `COMPLEX', or when it is `COMPLEX(KIND=1)'.
When A is any `COMPLEX' type other than `COMPLEX(KIND=1)', this
intrinsic is valid only when used as the argument to `REAL()', as
explained below.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Converts A to `REAL(KIND=1)'.

   Use of `REAL()' with a `COMPLEX' argument (other than
`COMPLEX(KIND=1)') is restricted to the following case:

     REAL(REAL(A))

This expression converts the real part of A to `REAL(KIND=1)'.

   *Note RealPart Intrinsic::, for information on a GNU Fortran
intrinsic that extracts the real part of an arbitrary `COMPLEX' value.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77.info,  Node: RealPart Intrinsic,  Next: Rename Intrinsic (subroutine),  Prev: Real Intrinsic,  Up: Table of Intrinsic Functions

RealPart Intrinsic
..................

     RealPart(Z)

RealPart: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   The real part of Z is returned, without conversion.

   *Note:* The way to do this in standard Fortran 90 is `REAL(Z)'.
However, when, for example, Z is `COMPLEX(KIND=2)', `REAL(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `REALPART()' is that, while not necessarily more or
less portable than `REAL()', it is more likely to cause a compiler that
doesn't support it to produce a diagnostic than generate incorrect code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77.info,  Node: Rename Intrinsic (subroutine),  Next: Repeat Intrinsic,  Prev: RealPart Intrinsic,  Up: Table of Intrinsic Functions

Rename Intrinsic (subroutine)
.............................

     CALL Rename(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Renames the file PATH1 to PATH2.  A null character (`CHAR(0)') marks
the end of the names in PATH1 and PATH2--otherwise, trailing blanks in
PATH1 and PATH2 are ignored.  See `rename(2)'.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Rename
Intrinsic (function)::.


File: g77.info,  Node: Repeat Intrinsic,  Next: Reshape Intrinsic,  Prev: Rename Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Repeat Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Repeat' to use this name for an
external procedure.


File: g77.info,  Node: Reshape Intrinsic,  Next: RRSpacing Intrinsic,  Prev: Repeat Intrinsic,  Up: Table of Intrinsic Functions

Reshape Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Reshape' to use this name for
an external procedure.


File: g77.info,  Node: RRSpacing Intrinsic,  Next: RShift Intrinsic,  Prev: Reshape Intrinsic,  Up: Table of Intrinsic Functions

RRSpacing Intrinsic
...................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL RRSpacing' to use this name
for an external procedure.


File: g77.info,  Node: RShift Intrinsic,  Next: Scale Intrinsic,  Prev: RRSpacing Intrinsic,  Up: Table of Intrinsic Functions

RShift Intrinsic
................

     RShift(I, SHIFT)

RShift: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns I shifted to the right SHIFT bits.

   Although similar to the expression `I/(2**SHIFT)', there are
important differences.  For example, the sign of the result is
undefined.

   Currently this intrinsic is defined assuming the underlying
representation of I is as a two's-complement integer.  It is unclear at
this point whether that definition will apply when a different
representation is involved.

   *Note RShift Intrinsic::, for the inverse of this function.

   *Note IShft Intrinsic::, for information on a more widely available
right-shifting intrinsic that is also more precisely defined.


File: g77.info,  Node: Scale Intrinsic,  Next: Scan Intrinsic,  Prev: RShift Intrinsic,  Up: Table of Intrinsic Functions

Scale Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Scale' to use this name for an
external procedure.


File: g77.info,  Node: Scan Intrinsic,  Next: Second Intrinsic (function),  Prev: Scale Intrinsic,  Up: Table of Intrinsic Functions

Scan Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Scan' to use this name for an
external procedure.


File: g77.info,  Node: Second Intrinsic (function),  Next: Second Intrinsic (subroutine),  Prev: Scan Intrinsic,  Up: Table of Intrinsic Functions

Second Intrinsic (function)
...........................

     Second()

Second: `REAL(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the process's runtime in seconds--the same value as the UNIX
function `etime' returns.

   For information on other intrinsics with the same name: *Note Second
Intrinsic (subroutine)::.


File: g77.info,  Node: Second Intrinsic (subroutine),  Next: Selected_Int_Kind Intrinsic,  Prev: Second Intrinsic (function),  Up: Table of Intrinsic Functions

Second Intrinsic (subroutine)
.............................

     CALL Second(SECONDS)

SECONDS: `REAL'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the process's runtime in seconds in SECONDS--the same value
as the UNIX function `etime' returns.

   This routine is known from Cray Fortran.  *Note CPU_Time Intrinsic::
for a standard equivalent.

   For information on other intrinsics with the same name: *Note Second
Intrinsic (function)::.


File: g77.info,  Node: Selected_Int_Kind Intrinsic,  Next: Selected_Real_Kind Intrinsic,  Prev: Second Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Selected_Int_Kind Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Selected_Int_Kind' to use this
name for an external procedure.


File: g77.info,  Node: Selected_Real_Kind Intrinsic,  Next: Set_Exponent Intrinsic,  Prev: Selected_Int_Kind Intrinsic,  Up: Table of Intrinsic Functions

Selected_Real_Kind Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Selected_Real_Kind' to use
this name for an external procedure.


File: g77.info,  Node: Set_Exponent Intrinsic,  Next: Shape Intrinsic,  Prev: Selected_Real_Kind Intrinsic,  Up: Table of Intrinsic Functions

Set_Exponent Intrinsic
......................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Set_Exponent' to use this name
for an external procedure.


File: g77.info,  Node: Shape Intrinsic,  Next: Short Intrinsic,  Prev: Set_Exponent Intrinsic,  Up: Table of Intrinsic Functions

Shape Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Shape' to use this name for an
external procedure.


File: g77.info,  Node: Short Intrinsic,  Next: Sign Intrinsic,  Prev: Shape Intrinsic,  Up: Table of Intrinsic Functions

Short Intrinsic
...............

     Short(A)

Short: `INTEGER(KIND=6)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=6)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77.info,  Node: Sign Intrinsic,  Next: Signal Intrinsic (subroutine),  Prev: Short Intrinsic,  Up: Table of Intrinsic Functions

Sign Intrinsic
..............

     Sign(A, B)

Sign: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; scalar; INTENT(IN).

B: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `ABS(A)*S', where S is +1 if `B.GE.0', -1 otherwise.

   *Note Abs Intrinsic::, for the function that returns the magnitude
of a value.


File: g77.info,  Node: Signal Intrinsic (subroutine),  Next: Sin Intrinsic,  Prev: Sign Intrinsic,  Up: Table of Intrinsic Functions

Signal Intrinsic (subroutine)
.............................

     CALL Signal(NUMBER, HANDLER, STATUS)

NUMBER: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

STATUS: `INTEGER(KIND=7)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   If HANDLER is a an `EXTERNAL' routine, arranges for it to be invoked
with a single integer argument (of system-dependent length) when signal
NUMBER occurs.  If HANDLER is an integer, it can be used to turn off
handling of signal NUMBER or revert to its default action.  See
`signal(2)'.

   Note that HANDLER will be called using C conventions, so the value
of its argument in Fortran terms Fortran terms is obtained by applying
`%LOC()' (or LOC()) to it.

   The value returned by `signal(2)' is written to STATUS, if that
argument is supplied.  Otherwise the return value is ignored.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   *Warning:* Use of the `libf2c' run-time library function `signal_'
directly (such as via `EXTERNAL SIGNAL') requires use of the `%VAL()'
construct to pass an `INTEGER' value (such as `SIG_IGN' or `SIG_DFL')
for the HANDLER argument.

   However, while `CALL SIGNAL(SIGNUM, %VAL(SIG_IGN))' works when
`SIGNAL' is treated as an external procedure (and resolves, at link
time, to `libf2c''s `signal_' routine), this construct is not valid
when `SIGNAL' is recognized as the intrinsic of that name.

   Therefore, for maximum portability and reliability, code such
references to the `SIGNAL' facility as follows:

     INTRINSIC SIGNAL
     ...
     CALL SIGNAL(SIGNUM, SIG_IGN)

   `g77' will compile such a call correctly, while other compilers will
generally either do so as well or reject the `INTRINSIC SIGNAL'
statement via a diagnostic, allowing you to take appropriate action.

   For information on other intrinsics with the same name: *Note Signal
Intrinsic (function)::.


File: g77.info,  Node: Sin Intrinsic,  Next: SinH Intrinsic,  Prev: Signal Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Sin Intrinsic
.............

     Sin(X)

Sin: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the sine of X, an angle measured in radians.

   *Note ASin Intrinsic::, for the inverse of this function.


File: g77.info,  Node: SinH Intrinsic,  Next: Sleep Intrinsic,  Prev: Sin Intrinsic,  Up: Table of Intrinsic Functions

SinH Intrinsic
..............

     SinH(X)

SinH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic sine of X.


File: g77.info,  Node: Sleep Intrinsic,  Next: Sngl Intrinsic,  Prev: SinH Intrinsic,  Up: Table of Intrinsic Functions

Sleep Intrinsic
...............

     CALL Sleep(SECONDS)

SECONDS: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Causes the process to pause for SECONDS seconds.  See `sleep(2)'.


File: g77.info,  Node: Sngl Intrinsic,  Next: Spacing Intrinsic,  Prev: Sleep Intrinsic,  Up: Table of Intrinsic Functions

Sngl Intrinsic
..............

     Sngl(A)

Sngl: `REAL(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77.info,  Node: Spacing Intrinsic,  Next: Spread Intrinsic,  Prev: Sngl Intrinsic,  Up: Table of Intrinsic Functions

Spacing Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Spacing' to use this name for
an external procedure.


File: g77.info,  Node: Spread Intrinsic,  Next: SqRt Intrinsic,  Prev: Spacing Intrinsic,  Up: Table of Intrinsic Functions

Spread Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Spread' to use this name for an
external procedure.


File: g77.info,  Node: SqRt Intrinsic,  Next: SRand Intrinsic,  Prev: Spread Intrinsic,  Up: Table of Intrinsic Functions

SqRt Intrinsic
..............

     SqRt(X)

SqRt: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the square root of X, which must not be negative.

   To calculate and represent the square root of a negative number,
complex arithmetic must be used.  For example, `SQRT(COMPLEX(X))'.

   The inverse of this function is `SQRT(X) * SQRT(X)'.


File: g77.info,  Node: SRand Intrinsic,  Next: Stat Intrinsic (subroutine),  Prev: SqRt Intrinsic,  Up: Table of Intrinsic Functions

SRand Intrinsic
...............

     CALL SRand(SEED)

SEED: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Reinitialises the generator with the seed in SEED.  *Note IRand
Intrinsic::.  *Note Rand Intrinsic::.


File: g77.info,  Node: Stat Intrinsic (subroutine),  Next: Stat Intrinsic (function),  Prev: SRand Intrinsic,  Up: Table of Intrinsic Functions

Stat Intrinsic (subroutine)
...........................

     CALL Stat(FILE, SARRAY, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Stat
Intrinsic (function)::.


File: g77.info,  Node: Stat Intrinsic (function),  Next: Sum Intrinsic,  Prev: Stat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Stat Intrinsic (function)
.........................

     Stat(FILE, SARRAY)

Stat: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. File mode

  2. Inode number

  3. ID of device containing directory entry for file

  4. Device id (if relevant)

  5. Number of links

  6. Owner's uid

  7. Owner's gid

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size

 13. Number of blocks allocated

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code.

   For information on other intrinsics with the same name: *Note Stat
Intrinsic (subroutine)::.


File: g77.info,  Node: Sum Intrinsic,  Next: SymLnk Intrinsic (subroutine),  Prev: Stat Intrinsic (function),  Up: Table of Intrinsic Functions

Sum Intrinsic
.............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Sum' to use this name for an
external procedure.


File: g77.info,  Node: SymLnk Intrinsic (subroutine),  Next: System Intrinsic (subroutine),  Prev: Sum Intrinsic,  Up: Table of Intrinsic Functions

SymLnk Intrinsic (subroutine)
.............................

     CALL SymLnk(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Makes a symbolic link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return (`ENOSYS' if the system does not provide `symlink(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note SymLnk
Intrinsic (function)::.


File: g77.info,  Node: System Intrinsic (subroutine),  Next: System_Clock Intrinsic,  Prev: SymLnk Intrinsic (subroutine),  Up: Table of Intrinsic Functions

System Intrinsic (subroutine)
.............................

     CALL System(COMMAND, STATUS)

COMMAND: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Passes the command COMMAND to a shell (see `system(3)').  If
argument STATUS is present, it contains the value returned by
`system(3)', presumably 0 if the shell command succeeded.  Note that
which shell is used to invoke the command is system-dependent and
environment-dependent.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note System
Intrinsic (function)::.


File: g77.info,  Node: System_Clock Intrinsic,  Next: Tan Intrinsic,  Prev: System Intrinsic (subroutine),  Up: Table of Intrinsic Functions

System_Clock Intrinsic
......................

     CALL System_Clock(COUNT, RATE, MAX)

COUNT: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

RATE: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

MAX: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `f90'.

Description:

   Returns in COUNT the current value of the system clock; this is the
value returned by the UNIX function `times(2)' in this implementation,
but isn't in general.  RATE is the number of clock ticks per second and
MAX is the maximum value this can take, which isn't very useful in this
implementation since it's just the maximum C `unsigned int' value.


File: g77.info,  Node: Tan Intrinsic,  Next: TanH Intrinsic,  Prev: System_Clock Intrinsic,  Up: Table of Intrinsic Functions

Tan Intrinsic
.............

     Tan(X)

Tan: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the tangent of X, an angle measured in radians.

   *Note ATan Intrinsic::, for the inverse of this function.


File: g77.info,  Node: TanH Intrinsic,  Next: Time Intrinsic (UNIX),  Prev: Tan Intrinsic,  Up: Table of Intrinsic Functions

TanH Intrinsic
..............

     TanH(X)

TanH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic tangent of X.


File: g77.info,  Node: Time Intrinsic (UNIX),  Next: Time8 Intrinsic,  Prev: TanH Intrinsic,  Up: Table of Intrinsic Functions

Time Intrinsic (UNIX)
.....................

     Time()

Time: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current time encoded as an integer (in the manner of the
UNIX function `time(3)').  This value is suitable for passing to
`CTIME', `GMTIME', and `LTIME'.

   This intrinsic is not fully portable, such as to systems with 32-bit
`INTEGER' types but supporting times wider than 32 bits.  *Note Time8
Intrinsic::, for information on a similar intrinsic that might be
portable to more GNU Fortran implementations, though to fewer Fortran
compilers.

   For information on other intrinsics with the same name: *Note Time
Intrinsic (VXT)::.


File: g77.info,  Node: Time8 Intrinsic,  Next: Tiny Intrinsic,  Prev: Time Intrinsic (UNIX),  Up: Table of Intrinsic Functions

Time8 Intrinsic
...............

     Time8()

Time8: `INTEGER(KIND=2)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current time encoded as a long integer (in the manner of
the UNIX function `time(3)').  This value is suitable for passing to
`CTIME', `GMTIME', and `LTIME'.

   No Fortran implementations other than GNU Fortran are known to
support this intrinsic at the time of this writing.  *Note Time
Intrinsic (UNIX)::, for information on a similar intrinsic that might
be portable to more Fortran compilers, though to fewer GNU Fortran
implementations.


File: g77.info,  Node: Tiny Intrinsic,  Next: Transfer Intrinsic,  Prev: Time8 Intrinsic,  Up: Table of Intrinsic Functions

Tiny Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Tiny' to use this name for an
external procedure.


File: g77.info,  Node: Transfer Intrinsic,  Next: Transpose Intrinsic,  Prev: Tiny Intrinsic,  Up: Table of Intrinsic Functions

Transfer Intrinsic
..................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Transfer' to use this name for
an external procedure.


File: g77.info,  Node: Transpose Intrinsic,  Next: Trim Intrinsic,  Prev: Transfer Intrinsic,  Up: Table of Intrinsic Functions

Transpose Intrinsic
...................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Transpose' to use this name
for an external procedure.


File: g77.info,  Node: Trim Intrinsic,  Next: TtyNam Intrinsic (subroutine),  Prev: Transpose Intrinsic,  Up: Table of Intrinsic Functions

Trim Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Trim' to use this name for an
external procedure.


File: g77.info,  Node: TtyNam Intrinsic (subroutine),  Next: TtyNam Intrinsic (function),  Prev: Trim Intrinsic,  Up: Table of Intrinsic Functions

TtyNam Intrinsic (subroutine)
.............................

     CALL TtyNam(NAME, UNIT)

NAME: `CHARACTER'; scalar; INTENT(OUT).

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Sets NAME to the name of the terminal device open on logical unit
UNIT or a blank string if UNIT is not connected to a terminal.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note TtyNam
Intrinsic (function)::.


File: g77.info,  Node: TtyNam Intrinsic (function),  Next: UBound Intrinsic,  Prev: TtyNam Intrinsic (subroutine),  Up: Table of Intrinsic Functions

TtyNam Intrinsic (function)
...........................

     TtyNam(UNIT)

TtyNam: `CHARACTER*(*)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the name of the terminal device open on logical unit UNIT or
a blank string if UNIT is not connected to a terminal.

   For information on other intrinsics with the same name: *Note TtyNam
Intrinsic (subroutine)::.


File: g77.info,  Node: UBound Intrinsic,  Next: UMask Intrinsic (subroutine),  Prev: TtyNam Intrinsic (function),  Up: Table of Intrinsic Functions

UBound Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL UBound' to use this name for an
external procedure.


File: g77.info,  Node: UMask Intrinsic (subroutine),  Next: Unlink Intrinsic (subroutine),  Prev: UBound Intrinsic,  Up: Table of Intrinsic Functions

UMask Intrinsic (subroutine)
............................

     CALL UMask(MASK, OLD)

MASK: `INTEGER'; scalar; INTENT(IN).

OLD: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets the file creation mask to MASK and returns the old value in
argument OLD if it is supplied.  See `umask(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note UMask
Intrinsic (function)::.


File: g77.info,  Node: Unlink Intrinsic (subroutine),  Next: Unpack Intrinsic,  Prev: UMask Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Unlink Intrinsic (subroutine)
.............................

     CALL Unlink(FILE, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Unlink the file FILE.  A null character (`CHAR(0)') marks the end of
the name in FILE--otherwise, trailing blanks in FILE are ignored.  If
the STATUS argument is supplied, it contains 0 on success or a non-zero
error code upon return.  See `unlink(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Unlink
Intrinsic (function)::.


File: g77.info,  Node: Unpack Intrinsic,  Next: Verify Intrinsic,  Prev: Unlink Intrinsic (subroutine),  Up: Table of Intrinsic Functions

Unpack Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Unpack' to use this name for an
external procedure.


File: g77.info,  Node: Verify Intrinsic,  Next: XOr Intrinsic,  Prev: Unpack Intrinsic,  Up: Table of Intrinsic Functions

Verify Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Verify' to use this name for an
external procedure.


File: g77.info,  Node: XOr Intrinsic,  Next: ZAbs Intrinsic,  Prev: Verify Intrinsic,  Up: Table of Intrinsic Functions

XOr Intrinsic
.............

     XOr(I, J)

XOr: `INTEGER' or `LOGICAL' function, the exact type being the result
of cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean exclusive-OR of pair of bits in
each of I and J.


File: g77.info,  Node: ZAbs Intrinsic,  Next: ZCos Intrinsic,  Prev: XOr Intrinsic,  Up: Table of Intrinsic Functions

ZAbs Intrinsic
..............

     ZAbs(A)

ZAbs: `REAL(KIND=2)' function.

A: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77.info,  Node: ZCos Intrinsic,  Next: ZExp Intrinsic,  Prev: ZAbs Intrinsic,  Up: Table of Intrinsic Functions

ZCos Intrinsic
..............

     ZCos(X)

ZCos: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77.info,  Node: ZExp Intrinsic,  Next: ZLog Intrinsic,  Prev: ZCos Intrinsic,  Up: Table of Intrinsic Functions

ZExp Intrinsic
..............

     ZExp(X)

ZExp: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77.info,  Node: ZLog Intrinsic,  Next: ZSin Intrinsic,  Prev: ZExp Intrinsic,  Up: Table of Intrinsic Functions

ZLog Intrinsic
..............

     ZLog(X)

ZLog: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77.info,  Node: ZSin Intrinsic,  Next: ZSqRt Intrinsic,  Prev: ZLog Intrinsic,  Up: Table of Intrinsic Functions

ZSin Intrinsic
..............

     ZSin(X)

ZSin: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77.info,  Node: ZSqRt Intrinsic,  Prev: ZSin Intrinsic,  Up: Table of Intrinsic Functions

ZSqRt Intrinsic
...............

     ZSqRt(X)

ZSqRt: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77.info,  Node: Scope and Classes of Names,  Prev: Functions and Subroutines,  Up: Language

Scope and Classes of Symbolic Names
===================================

   (The following information augments or overrides the information in
Chapter 18 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 18 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* Underscores in Symbol Names::


File: g77.info,  Node: Underscores in Symbol Names,  Up: Scope and Classes of Names

Underscores in Symbol Names
---------------------------

   Underscores (`_') are accepted in symbol names after the first
character (which must be a letter).


File: g77.info,  Node: Other Dialects,  Next: Other Compilers,  Prev: Compiler,  Up: Top

Other Dialects
**************

   GNU Fortran supports a variety of features that are not considered
part of the GNU Fortran language itself, but are representative of
various dialects of Fortran that `g77' supports in whole or in part.

   Any of the features listed below might be disallowed by `g77' unless
some command-line option is specified.  Currently, some of the features
are accepted using the default invocation of `g77', but that might
change in the future.

   *Note: This portion of the documentation definitely needs a lot of
work!*

* Menu:

* Source Form::       Details of fixed-form and free-form source.
* Trailing Comment::  Use of `/*' to start a comment.
* Debug Line::        Use of `D' in column 1.
* Dollar Signs::      Use of `$' in symbolic names.
* Case Sensitivity::  Uppercase and lowercase in source files.
* VXT Fortran::       ...versus the GNU Fortran language.
* Fortran 90::        ...versus the GNU Fortran language.
* Pedantic Compilation::  Enforcing the standard.
* Distensions::       Misfeatures supported by GNU Fortran.


File: g77.info,  Node: Source Form,  Next: Trailing Comment,  Up: Other Dialects

Source Form
===========

   GNU Fortran accepts programs written in either fixed form or free
form.

   Fixed form corresponds to ANSI FORTRAN 77 (plus popular extensions,
such as allowing tabs) and Fortran 90's fixed form.

   Free form corresponds to Fortran 90's free form (though possibly not
entirely up-to-date, and without complaining about some things that for
which Fortran 90 requires diagnostics, such as the spaces in the
constant in `R = 3 . 1').

   The way a Fortran compiler views source files depends entirely on the
implementation choices made for the compiler, since those choices are
explicitly left to the implementation by the published Fortran
standards.  GNU Fortran currently tries to be somewhat like a few
popular compilers (`f2c', Digital ("DEC") Fortran, and so on), though a
cleaner default definition along with more flexibility offered by
command-line options is likely to be offered in version 0.6.

   This section describes how `g77' interprets source lines.

* Menu:

* Carriage Returns::  Carriage returns ignored.
* Tabs::              Tabs converted to spaces.
* Short Lines::       Short lines padded with spaces (fixed-form only).
* Long Lines::        Long lines truncated.
* Ampersands::        Special Continuation Lines.


File: g77.info,  Node: Carriage Returns,  Next: Tabs,  Up: Source Form

Carriage Returns
----------------

   Carriage returns (`\r') in source lines are ignored.  This is
somewhat different from `f2c', which seems to treat them as spaces
outside character/Hollerith constants, and encodes them as `\r' inside
such constants.


File: g77.info,  Node: Tabs,  Next: Short Lines,  Prev: Carriage Returns,  Up: Source Form

Tabs
----

   A source line with a <TAB> character anywhere in it is treated as
entirely significant--however long it is--instead of ending in column
72 (for fixed-form source) or 132 (for free-form source).  This also is
different from `f2c', which encodes tabs as `\t' (the ASCII <TAB>
character) inside character and Hollerith constants, but nevertheless
seems to treat the column position as if it had been affected by the
canonical tab positioning.

   `g77' effectively translates tabs to the appropriate number of
spaces (a la the default for the UNIX `expand' command) before doing
any other processing, other than (currently) noting whether a tab was
found on a line and using this information to decide how to interpret
the length of the line and continued constants.

   Note that this default behavior probably will change for version 0.6,
when it will presumably be available via a command-line option.  The
default as of version 0.6 is planned to be a "pure visual" model, where
tabs are immediately converted to spaces and otherwise have no effect,
so the way a typical user sees source lines produces a consistent
result no matter how the spacing in those source lines is actually
implemented via tabs, spaces, and trailing tabs/spaces before newline.
Command-line options are likely to be added to specify whether all or
just-tabbed lines are to be extended to 132 or full input-line length,
and perhaps even an option will be added to specify the truncated-line
behavior to which some Digital compilers default (and which affects the
way continued character/Hollerith constants are interpreted).


File: g77.info,  Node: Short Lines,  Next: Long Lines,  Prev: Tabs,  Up: Source Form

Short Lines
-----------

   Source lines shorter than the applicable fixed-form length are
treated as if they were padded with spaces to that length.  (None of
this is relevant to source files written in free form.)

   This affects only continued character and Hollerith constants, and
is a different interpretation than provided by some other popular
compilers (although a bit more consistent with the traditional
punched-card basis of Fortran and the way the Fortran standard
expressed fixed source form).

   `g77' might someday offer an option to warn about cases where
differences might be seen as a result of this treatment, and perhaps an
option to specify the alternate behavior as well.

   Note that this padding cannot apply to lines that are effectively of
infinite length--such lines are specified using command-line options
like `-ffixed-line-length-none', for example.


File: g77.info,  Node: Long Lines,  Next: Ampersands,  Prev: Short Lines,  Up: Source Form

Long Lines
----------

   Source lines longer than the applicable length are truncated to that
length.  Currently, `g77' does not warn if the truncated characters are
not spaces, to accommodate existing code written for systems that
treated truncated text as commentary (especially in columns 73 through
80).

   *Note Options Controlling Fortran Dialect: Fortran Dialect Options,
for information on the `-ffixed-line-length-N' option, which can be
used to set the line length applicable to fixed-form source files.


File: g77.info,  Node: Ampersands,  Prev: Long Lines,  Up: Source Form

Ampersand Continuation Line
---------------------------

   A `&' in column 1 of fixed-form source denotes an arbitrary-length
continuation line, imitating the behavior of `f2c'.


File: g77.info,  Node: Trailing Comment,  Next: Debug Line,  Prev: Source Form,  Up: Other Dialects

Trailing Comment
================

   `g77' supports use of `/*' to start a trailing comment.  In the GNU
Fortran language, `!' is used for this purpose.

   `/*' is not in the GNU Fortran language because the use of `/*' in a
program might suggest to some readers that a block, not trailing,
comment is started (and thus ended by `*/', not end of line), since
that is the meaning of `/*' in C.

   Also, such readers might think they can use `//' to start a trailing
comment as an alternative to `/*', but `//' already denotes
concatenation, and such a "comment" might actually result in a program
that compiles without error (though it would likely behave incorrectly).


File: g77.info,  Node: Debug Line,  Next: Dollar Signs,  Prev: Trailing Comment,  Up: Other Dialects

Debug Line
==========

   Use of `D' or `d' as the first character (column 1) of a source line
denotes a debug line.

   In turn, a debug line is treated as either a comment line or a
normal line, depending on whether debug lines are enabled.

   When treated as a comment line, a line beginning with `D' or `d' is
treated as if it the first character was `C' or `c', respectively.
When treated as a normal line, such a line is treated as if the first
character was <SPC> (space).

   (Currently, `g77' provides no means for treating debug lines as
normal lines.)


File: g77.info,  Node: Dollar Signs,  Next: Case Sensitivity,  Prev: Debug Line,  Up: Other Dialects

Dollar Signs in Symbol Names
============================

   Dollar signs (`$') are allowed in symbol names (after the first
character) when the `-fdollar-ok' option is specified.


File: g77.info,  Node: Case Sensitivity,  Next: VXT Fortran,  Prev: Dollar Signs,  Up: Other Dialects

Case Sensitivity
================

   GNU Fortran offers the programmer way too much flexibility in
deciding how source files are to be treated vis-a-vis uppercase and
lowercase characters.  There are 66 useful settings that affect case
sensitivity, plus 10 settings that are nearly useless, with the
remaining 116 settings being either redundant or useless.

   None of these settings have any effect on the contents of comments
(the text after a `c' or `C' in Column 1, for example) or of character
or Hollerith constants.  Note that things like the `E' in the statement
`CALL FOO(3.2E10)' and the `TO' in `ASSIGN 10 TO LAB' are considered
built-in keywords, and so are affected by these settings.

   Low-level switches are identified in this section as follows:

     A Source Case Conversion:

          0 Preserve (see Note 1)

          1 Convert to Upper Case

          2 Convert to Lower Case

     B Built-in Keyword Matching:

          0 Match Any Case (per-character basis)

          1 Match Upper Case Only

          2 Match Lower Case Only

          3 Match InitialCaps Only (see tables for spellings)

     C Built-in Intrinsic Matching:

          0 Match Any Case (per-character basis)

          1 Match Upper Case Only

          2 Match Lower Case Only

          3 Match InitialCaps Only (see tables for spellings)

     D User-defined Symbol Possibilities (warnings only):

          0 Allow Any Case (per-character basis)

          1 Allow Upper Case Only

          2 Allow Lower Case Only

          3 Allow InitialCaps Only (see Note 2)

   Note 1: `g77' eventually will support `NAMELIST' in a manner that is
consistent with these source switches--in the sense that input will be
expected to meet the same requirements as source code in terms of
matching symbol names and keywords (for the exponent letters).

   Currently, however, `NAMELIST' is supported by `libf2c', which
uppercases `NAMELIST' input and symbol names for matching.  This means
not only that `NAMELIST' output currently shows symbol (and keyword)
names in uppercase even if lower-case source conversion (option A2) is
selected, but that `NAMELIST' cannot be adequately supported when
source case preservation (option A0) is selected.

   If A0 is selected, a warning message will be output for each
`NAMELIST' statement to this effect.  The behavior of the program is
undefined at run time if two or more symbol names appear in a given
`NAMELIST' such that the names are identical when converted to upper
case (e.g. `NAMELIST /X/ VAR, Var, var').  For complete and total
elegance, perhaps there should be a warning when option A2 is selected,
since the output of NAMELIST is currently in uppercase but will someday
be lowercase (when a `libg77' is written), but that seems to be
overkill for a product in beta test.

   Note 2: Rules for InitialCaps names are:

   - Must be a single uppercase letter, *or*

   - Must start with an uppercase letter and contain at least one
     lowercase letter.

   So `A', `Ab', `ABc', `AbC', and `Abc' are valid InitialCaps names,
but `AB', `A2', and `ABC' are not.  Note that most, but not all,
built-in names meet these requirements--the exceptions are some of the
two-letter format specifiers, such as `BN' and `BZ'.

   Here are the names of the corresponding command-line options:

     A0: -fsource-case-preserve
     A1: -fsource-case-upper
     A2: -fsource-case-lower
     
     B0: -fmatch-case-any
     B1: -fmatch-case-upper
     B2: -fmatch-case-lower
     B3: -fmatch-case-initcap
     
     C0: -fintrin-case-any
     C1: -fintrin-case-upper
     C2: -fintrin-case-lower
     C3: -fintrin-case-initcap
     
     D0: -fsymbol-case-any
     D1: -fsymbol-case-upper
     D2: -fsymbol-case-lower
     D3: -fsymbol-case-initcap

   Useful combinations of the above settings, along with abbreviated
option names that set some of these combinations all at once:

      1: A0--  B0---  C0---  D0---    -fcase-preserve
      2: A0--  B0---  C0---  D-1--
      3: A0--  B0---  C0---  D--2-
      4: A0--  B0---  C0---  D---3
      5: A0--  B0---  C-1--  D0---
      6: A0--  B0---  C-1--  D-1--
      7: A0--  B0---  C-1--  D--2-
      8: A0--  B0---  C-1--  D---3
      9: A0--  B0---  C--2-  D0---
     10: A0--  B0---  C--2-  D-1--
     11: A0--  B0---  C--2-  D--2-
     12: A0--  B0---  C--2-  D---3
     13: A0--  B0---  C---3  D0---
     14: A0--  B0---  C---3  D-1--
     15: A0--  B0---  C---3  D--2-
     16: A0--  B0---  C---3  D---3
     17: A0--  B-1--  C0---  D0---
     18: A0--  B-1--  C0---  D-1--
     19: A0--  B-1--  C0---  D--2-
     20: A0--  B-1--  C0---  D---3
     21: A0--  B-1--  C-1--  D0---
     22: A0--  B-1--  C-1--  D-1--    -fcase-strict-upper
     23: A0--  B-1--  C-1--  D--2-
     24: A0--  B-1--  C-1--  D---3
     25: A0--  B-1--  C--2-  D0---
     26: A0--  B-1--  C--2-  D-1--
     27: A0--  B-1--  C--2-  D--2-
     28: A0--  B-1--  C--2-  D---3
     29: A0--  B-1--  C---3  D0---
     30: A0--  B-1--  C---3  D-1--
     31: A0--  B-1--  C---3  D--2-
     32: A0--  B-1--  C---3  D---3
     33: A0--  B--2-  C0---  D0---
     34: A0--  B--2-  C0---  D-1--
     35: A0--  B--2-  C0---  D--2-
     36: A0--  B--2-  C0---  D---3
     37: A0--  B--2-  C-1--  D0---
     38: A0--  B--2-  C-1--  D-1--
     39: A0--  B--2-  C-1--  D--2-
     40: A0--  B--2-  C-1--  D---3
     41: A0--  B--2-  C--2-  D0---
     42: A0--  B--2-  C--2-  D-1--
     43: A0--  B--2-  C--2-  D--2-    -fcase-strict-lower
     44: A0--  B--2-  C--2-  D---3
     45: A0--  B--2-  C---3  D0---
     46: A0--  B--2-  C---3  D-1--
     47: A0--  B--2-  C---3  D--2-
     48: A0--  B--2-  C---3  D---3
     49: A0--  B---3  C0---  D0---
     50: A0--  B---3  C0---  D-1--
     51: A0--  B---3  C0---  D--2-
     52: A0--  B---3  C0---  D---3
     53: A0--  B---3  C-1--  D0---
     54: A0--  B---3  C-1--  D-1--
     55: A0--  B---3  C-1--  D--2-
     56: A0--  B---3  C-1--  D---3
     57: A0--  B---3  C--2-  D0---
     58: A0--  B---3  C--2-  D-1--
     59: A0--  B---3  C--2-  D--2-
     60: A0--  B---3  C--2-  D---3
     61: A0--  B---3  C---3  D0---
     62: A0--  B---3  C---3  D-1--
     63: A0--  B---3  C---3  D--2-
     64: A0--  B---3  C---3  D---3    -fcase-initcap
     65: A-1-  B01--  C01--  D01--    -fcase-upper
     66: A--2  B0-2-  C0-2-  D0-2-    -fcase-lower

   Number 22 is the "strict" ANSI FORTRAN 77 model wherein all input
(except comments, character constants, and Hollerith strings) must be
entered in uppercase.  Use `-fcase-strict-upper' to specify this
combination.

   Number 43 is like Number 22 except all input must be lowercase.  Use
`-fcase-strict-lower' to specify this combination.

   Number 65 is the "classic" ANSI FORTRAN 77 model as implemented on
many non-UNIX machines whereby all the source is translated to
uppercase.  Use `-fcase-upper' to specify this combination.

   Number 66 is the "canonical" UNIX model whereby all the source is
translated to lowercase.  Use `-fcase-lower' to specify this
combination.

   There are a few nearly useless combinations:

     67: A-1-  B01--  C01--  D--2-
     68: A-1-  B01--  C01--  D---3
     69: A-1-  B01--  C--23  D01--
     70: A-1-  B01--  C--23  D--2-
     71: A-1-  B01--  C--23  D---3
     72: A--2  B01--  C0-2-  D-1--
     73: A--2  B01--  C0-2-  D---3
     74: A--2  B01--  C-1-3  D0-2-
     75: A--2  B01--  C-1-3  D-1--
     76: A--2  B01--  C-1-3  D---3

   The above allow some programs to be compiled but with restrictions
that make most useful programs impossible: Numbers 67 and 72 warn about
*any* user-defined symbol names (such as `SUBROUTINE FOO'); Numbers 68
and 73 warn about any user-defined symbol names longer than one
character that don't have at least one non-alphabetic character after
the first; Numbers 69 and 74 disallow any references to intrinsics; and
Numbers 70, 71, 75, and 76 are combinations of the restrictions in
67+69, 68+69, 72+74, and 73+74, respectively.

   All redundant combinations are shown in the above tables anyplace
where more than one setting is shown for a low-level switch.  For
example, `B0-2-' means either setting 0 or 2 is valid for switch B.
The "proper" setting in such a case is the one that copies the setting
of switch A--any other setting might slightly reduce the speed of the
compiler, though possibly to an unmeasurable extent.

   All remaining combinations are useless in that they prevent
successful compilation of non-null source files (source files with
something other than comments).


File: g77.info,  Node: VXT Fortran,  Next: Fortran 90,  Prev: Case Sensitivity,  Up: Other Dialects

VXT Fortran
===========

   `g77' supports certain constructs that have different meanings in
VXT Fortran than they do in the GNU Fortran language.

   Generally, this manual uses the invented term VXT Fortran to refer
VAX FORTRAN (circa v4).  That compiler offered many popular features,
though not necessarily those that are specific to the VAX processor
architecture, the VMS operating system, or Digital Equipment
Corporation's Fortran product line.  (VAX and VMS probably are
trademarks of Digital Equipment Corporation.)

   An extension offered by a Digital Fortran product that also is
offered by several other Fortran products for different kinds of
systems is probably going to be considered for inclusion in `g77'
someday, and is considered a VXT Fortran feature.

   The `-fvxt' option generally specifies that, where the meaning of a
construct is ambiguous (means one thing in GNU Fortran and another in
VXT Fortran), the VXT Fortran meaning is to be assumed.

* Menu:

* Double Quote Meaning::  `"2000' as octal constant.
* Exclamation Point::     `!' in column 6.


File: g77.info,  Node: Double Quote Meaning,  Next: Exclamation Point,  Up: VXT Fortran

Meaning of Double Quote
-----------------------

   `g77' treats double-quote (`"') as beginning an octal constant of
`INTEGER(KIND=1)' type when the `-fvxt' option is specified.  The form
of this octal constant is

     "OCTAL-DIGITS

where OCTAL-DIGITS is a nonempty string of characters in the set
`01234567'.

   For example, the `-fvxt' option permits this:

     PRINT *, "20
     END

The above program would print the value `16'.

   *Note Integer Type::, for information on the preferred construct for
integer constants specified using GNU Fortran's octal notation.

   (In the GNU Fortran language, the double-quote character (`"')
delimits a character constant just as does apostrophe (`'').  There is
no way to allow both constructs in the general case, since statements
like `PRINT *,"2000 !comment?"' would be ambiguous.)


File: g77.info,  Node: Exclamation Point,  Prev: Double Quote Meaning,  Up: VXT Fortran

Meaning of Exclamation Point in Column 6
----------------------------------------

   `g77' treats an exclamation point (`!') in column 6 of a fixed-form
source file as a continuation character rather than as the beginning of
a comment (as it does in any other column) when the `-fvxt' option is
specified.

   The following program, when run, prints a message indicating whether
it is interpreted according to GNU Fortran (and Fortran 90) rules or
VXT Fortran rules:

     C234567  (This line begins in column 1.)
           I = 0
          !1
           IF (I.EQ.0) PRINT *, ' I am a VXT Fortran program'
           IF (I.EQ.1) PRINT *, ' I am a Fortran 90 program'
           IF (I.LT.0 .OR. I.GT.1) PRINT *, ' I am a HAL 9000 computer'
           END

   (In the GNU Fortran and Fortran 90 languages, exclamation point is a
valid character and, unlike space (<SPC>) or zero (`0'), marks a line
as a continuation line when it appears in column 6.)


File: g77.info,  Node: Fortran 90,  Next: Pedantic Compilation,  Prev: VXT Fortran,  Up: Other Dialects

Fortran 90
==========

   The GNU Fortran language includes a number of features that are part
of Fortran 90, even when the `-ff90' option is not specified.  The
features enabled by `-ff90' are intended to be those that, when `-ff90'
is not specified, would have another meaning to `g77'--usually meaning
something invalid in the GNU Fortran language.

   So, the purpose of `-ff90' is not to specify whether `g77' is to
gratuitously reject Fortran 90 constructs.  The `-pedantic' option
specified with `-fno-f90' is intended to do that, although its
implementation is certainly incomplete at this point.

   When `-ff90' is specified:

   * The type of `REAL(EXPR)' and `AIMAG(EXPR)', where EXPR is
     `COMPLEX' type, is the same type as the real part of EXPR.

     For example, assuming `Z' is type `COMPLEX(KIND=2)', `REAL(Z)'
     would return a value of type `REAL(KIND=2)', not of type
     `REAL(KIND=1)', since `-ff90' is specified.


File: g77.info,  Node: Pedantic Compilation,  Next: Distensions,  Prev: Fortran 90,  Up: Other Dialects

Pedantic Compilation
====================

   The `-fpedantic' command-line option specifies that `g77' is to warn
about code that is not standard-conforming.  This is useful for finding
some extensions `g77' accepts that other compilers might not accept.
(Note that the `-pedantic' and `-pedantic-errors' options always imply
`-fpedantic'.)

   With `-fno-f90' in force, ANSI FORTRAN 77 is used as the standard
for conforming code.  With `-ff90' in force, Fortran 90 is used.

   The constructs for which `g77' issues diagnostics when `-fpedantic'
and `-fno-f90' are in force are:

   * Automatic arrays, as in

          SUBROUTINE X(N)
          REAL A(N)
          ...

     where `A' is not listed in any `ENTRY' statement, and thus is not
     a dummy argument.

   * The commas in `READ (5), I' and `WRITE (10), J'.

     These commas are disallowed by FORTRAN 77, but, while strictly
     superfluous, are syntactically elegant, especially given that
     commas are required in statements such as `READ 99, I' and `PRINT
     *, J'.  Many compilers permit the superfluous commas for this
     reason.

   * `DOUBLE COMPLEX', either explicitly or implicitly.

     An explicit use of this type is via a `DOUBLE COMPLEX' or
     `IMPLICIT DOUBLE COMPLEX' statement, for examples.

     An example of an implicit use is the expression `C*D', where `C'
     is `COMPLEX(KIND=1)' and `D' is `DOUBLE PRECISION'.  This
     expression is prohibited by ANSI FORTRAN 77 because the rules of
     promotion would suggest that it produce a `DOUBLE COMPLEX'
     result--a type not provided for by that standard.

   * Automatic conversion of numeric expressions to `INTEGER(KIND=1)'
     in contexts such as:

        - Array-reference indexes.

        - Alternate-return values.

        - Computed `GOTO'.

        - `FORMAT' run-time expressions (not yet supported).

        - Dimension lists in specification statements.

        - Numbers for I/O statements (such as `READ (UNIT=3.2), I')

        - Sizes of `CHARACTER' entities in specification statements.

        - Kind types in specification entities (a Fortran 90 feature).

        - Initial, terminal, and incrementation parameters for
          implied-`DO' constructs in `DATA' statements.

   * Automatic conversion of `LOGICAL' expressions to `INTEGER' in
     contexts such as arithmetic `IF' (where `COMPLEX' expressions are
     disallowed anyway).

   * Zero-size array dimensions, as in:

          INTEGER I(10,20,4:2)

   * Zero-length `CHARACTER' entities, as in:

          PRINT *, ''

   * Substring operators applied to character constants and named
     constants, as in:

          PRINT *, 'hello'(3:5)

   * Null arguments passed to statement function, as in:

          PRINT *, FOO(,3)

   * Disagreement among program units regarding whether a given `COMMON'
     area is `SAVE'd (for targets where program units in a single source
     file are "glued" together as they typically are for UNIX
     development environments).

   * Disagreement among program units regarding the size of a named
     `COMMON' block.

   * Specification statements following first `DATA' statement.

     (In the GNU Fortran language, `DATA I/1/' may be followed by
     `INTEGER J', but not `INTEGER I'.  The `-fpedantic' option
     disallows both of these.)

   * Semicolon as statement separator, as in:

          CALL FOO; CALL BAR

   * Use of `&' in column 1 of fixed-form source (to indicate
     continuation).

   * Use of `CHARACTER' constants to initialize numeric entities, and
     vice versa.

   * Expressions having two arithmetic operators in a row, such as
     `X*-Y'.

   If `-fpedantic' is specified along with `-ff90', the following
constructs result in diagnostics:

   * Use of semicolon as a statement separator on a line that has an
     `INCLUDE' directive.


File: g77.info,  Node: Distensions,  Prev: Pedantic Compilation,  Up: Other Dialects

Distensions
===========

   The `-fugly-*' command-line options determine whether certain
features supported by VAX FORTRAN and other such compilers, but
considered too ugly to be in code that can be changed to use safer
and/or more portable constructs, are accepted.  These are humorously
referred to as "distensions", extensions that just plain look ugly in
the harsh light of day.

   *Note:* The `-fugly' option, which currently serves as shorthand to
enable all of the distensions below, is likely to be removed in a
future version of `g77'.  That's because it's likely new distensions
will be added that conflict with existing ones in terms of assigning
meaning to a given chunk of code.  (Also, it's pretty clear that users
should not use `-fugly' as shorthand when the next release of `g77'
might add a distension to that that causes their existing code, when
recompiled, to behave differently--perhaps even fail to compile or run
correctly.)

* Menu:

* Ugly Implicit Argument Conversion::  Disabled via `-fno-ugly-args'.
* Ugly Assumed-Size Arrays::           Enabled via `-fugly-assumed'.
* Ugly Null Arguments::                Enabled via `-fugly-comma'.
* Ugly Complex Part Extraction::       Enabled via `-fugly-complex'.
* Ugly Conversion of Initializers::    Disabled via `-fno-ugly-init'.
* Ugly Integer Conversions::           Enabled via `-fugly-logint'.
* Ugly Assigned Labels::               Enabled via `-fugly-assign'.


File: g77.info,  Node: Ugly Implicit Argument Conversion,  Next: Ugly Assumed-Size Arrays,  Up: Distensions

Implicit Argument Conversion
----------------------------

   The `-fno-ugly-args' option disables passing typeless and Hollerith
constants as actual arguments in procedure invocations.  For example:

     CALL FOO(4HABCD)
     CALL BAR('123'O)

These constructs can be too easily used to create non-portable code,
but are not considered as "ugly" as others.  Further, they are widely
used in existing Fortran source code in ways that often are quite
portable.  Therefore, they are enabled by default.


File: g77.info,  Node: Ugly Assumed-Size Arrays,  Next: Ugly Null Arguments,  Prev: Ugly Implicit Argument Conversion,  Up: Distensions

Ugly Assumed-Size Arrays
------------------------

   The `-fugly-assumed' option enables the treatment of any array with
a final dimension specified as `1' as an assumed-size array, as if `*'
had been specified instead.

   For example, `DIMENSION X(1)' is treated as if it had read
`DIMENSION X(*)' if `X' is listed as a dummy argument in a preceding
`SUBROUTINE', `FUNCTION', or `ENTRY' statement in the same program unit.

   Use an explicit lower bound to avoid this interpretation.  For
example, `DIMENSION X(1:1)' is never treated as if it had read
`DIMENSION X(*)' or `DIMENSION X(1:*)'.  Nor is `DIMENSION X(2-1)'
affected by this option, since that kind of expression is unlikely to
have been intended to designate an assumed-size array.

   This option is used to prevent warnings being issued about apparent
out-of-bounds reference such as `X(2) = 99'.

   It also prevents the array from being used in contexts that disallow
assumed-size arrays, such as `PRINT *,X'.  In such cases, a diagnostic
is generated and the source file is not compiled.

   The construct affected by this option is used only in old code that
pre-exists the widespread acceptance of adjustable and assumed-size
arrays in the Fortran community.

   *Note:* This option does not affect how `DIMENSION X(1)' is treated
if `X' is listed as a dummy argument only *after* the `DIMENSION'
statement (presumably in an `ENTRY' statement).  For example,
`-fugly-assumed' has no effect on the following program unit:

     SUBROUTINE X
     REAL A(1)
     RETURN
     ENTRY Y(A)
     PRINT *, A
     END


File: g77.info,  Node: Ugly Complex Part Extraction,  Next: Ugly Conversion of Initializers,  Prev: Ugly Null Arguments,  Up: Distensions

Ugly Complex Part Extraction
----------------------------

   The `-fugly-complex' option enables use of the `REAL()' and `AIMAG()'
intrinsics with arguments that are `COMPLEX' types other than
`COMPLEX(KIND=1)'.

   With `-ff90' in effect, these intrinsics return the unconverted real
and imaginary parts (respectively) of their argument.

   With `-fno-f90' in effect, these intrinsics convert the real and
imaginary parts to `REAL(KIND=1)', and return the result of that
conversion.

   Due to this ambiguity, the GNU Fortran language defines these
constructs as invalid, except in the specific case where they are
entirely and solely passed as an argument to an invocation of the
`REAL()' intrinsic.  For example,

     REAL(REAL(Z))

is permitted even when `Z' is `COMPLEX(KIND=2)' and `-fno-ugly-complex'
is in effect, because the meaning is clear.

   `g77' enforces this restriction, unless `-fugly-complex' is
specified, in which case the appropriate interpretation is chosen and
no diagnostic is issued.

   *Note CMPAMBIG::, for information on how to cope with existing code
with unclear expectations of `REAL()' and `AIMAG()' with
`COMPLEX(KIND=2)' arguments.

   *Note RealPart Intrinsic::, for information on the `REALPART()'
intrinsic, used to extract the real part of a complex expression
without conversion.  *Note ImagPart Intrinsic::, for information on the
`IMAGPART()' intrinsic, used to extract the imaginary part of a complex
expression without conversion.


File: g77.info,  Node: Ugly Null Arguments,  Next: Ugly Complex Part Extraction,  Prev: Ugly Assumed-Size Arrays,  Up: Distensions

Ugly Null Arguments
-------------------

   The `-fugly-comma' option enables use of a single trailing comma to
mean "pass an extra trailing null argument" in a list of actual
arguments to an external procedure, and use of an empty list of
arguments to such a procedure to mean "pass a single null argument".

   (Null arguments often are used in some procedure-calling schemes to
indicate omitted arguments.)

   For example, `CALL FOO(,)' means "pass two null arguments", rather
than "pass one null argument".  Also, `CALL BAR()' means "pass one null
argument".

   This construct is considered "ugly" because it does not provide an
elegant way to pass a single null argument that is syntactically
distinct from passing no arguments.  That is, this construct changes
the meaning of code that makes no use of the construct.

   So, with `-fugly-comma' in force, `CALL FOO()' and `I = JFUNC()'
pass a single null argument, instead of passing no arguments as
required by the Fortran 77 and 90 standards.

   *Note:* Many systems gracefully allow the case where a procedure
call passes one extra argument that the called procedure does not
expect.

   So, in practice, there might be no difference in the behavior of a
program that does `CALL FOO()' or `I = JFUNC()' and is compiled with
`-fugly-comma' in force as compared to its behavior when compiled with
the default, `-fno-ugly-comma', in force, assuming `FOO' and `JFUNC' do
not expect any arguments to be passed.


File: g77.info,  Node: Ugly Conversion of Initializers,  Next: Ugly Integer Conversions,  Prev: Ugly Complex Part Extraction,  Up: Distensions

Ugly Conversion of Initializers
-------------------------------

   The constructs disabled by `-fno-ugly-init' are:

   * Use of Hollerith and typeless constants in contexts where they set
     initial (compile-time) values for variables, arrays, and named
     constants--that is, `DATA' and `PARAMETER' statements, plus
     type-declaration statements specifying initial values.

     Here are some sample initializations that are disabled by the
     `-fno-ugly-init' option:

          PARAMETER (VAL='9A304FFE'X)
          REAL*8 STRING/8HOUTPUT00/
          DATA VAR/4HABCD/

   * In the same contexts as above, use of character constants to
     initialize numeric items and vice versa (one constant per item).

     Here are more sample initializations that are disabled by the
     `-fno-ugly-init' option:

          INTEGER IA
          CHARACTER BELL
          PARAMETER (IA = 'A')
          PARAMETER (BELL = 7)

   * Use of Hollerith and typeless constants on the right-hand side of
     assignment statements to numeric types, and in other contexts
     (such as passing arguments in invocations of intrinsic procedures
     and statement functions) that are treated as assignments to known
     types (the dummy arguments, in these cases).

     Here are sample statements that are disabled by the
     `-fno-ugly-init' option:

          IVAR = 4HABCD
          PRINT *, IMAX0(2HAB, 2HBA)

   The above constructs, when used, can tend to result in non-portable
code.  But, they are widely used in existing Fortran code in ways that
often are quite portable.  Therefore, they are enabled by default.


File: g77.info,  Node: Ugly Integer Conversions,  Next: Ugly Assigned Labels,  Prev: Ugly Conversion of Initializers,  Up: Distensions

Ugly Integer Conversions
------------------------

   The constructs enabled via `-fugly-logint' are:

   * Automatic conversion between `INTEGER' and `LOGICAL' as dictated by
     context (typically implies nonportable dependencies on how a
     particular implementation encodes `.TRUE.' and `.FALSE.').

   * Use of a `LOGICAL' variable in `ASSIGN' and assigned-`GOTO'
     statements.

   The above constructs are disabled by default because use of them
tends to lead to non-portable code.  Even existing Fortran code that
uses that often turns out to be non-portable, if not outright buggy.

   Some of this is due to differences among implementations as far as
how `.TRUE.' and `.FALSE.' are encoded as `INTEGER' values--Fortran
code that assumes a particular coding is likely to use one of the above
constructs, and is also likely to not work correctly on implementations
using different encodings.

   *Note Equivalence Versus Equality::, for more information.


File: g77.info,  Node: Ugly Assigned Labels,  Prev: Ugly Integer Conversions,  Up: Distensions

Ugly Assigned Labels
--------------------

   The `-fugly-assign' option forces `g77' to use the same storage for
assigned labels as it would for a normal assignment to the same
variable.

   For example, consider the following code fragment:

     I = 3
     ASSIGN 10 TO I

Normally, for portability and improved diagnostics, `g77' reserves
distinct storage for a "sibling" of `I', used only for `ASSIGN'
statements to that variable (along with the corresponding
assigned-`GOTO' and assigned-`FORMAT'-I/O statements that reference the
variable).

   However, some code (that violates the ANSI FORTRAN 77 standard)
attempts to copy assigned labels among variables involved with `ASSIGN'
statements, as in:

     ASSIGN 10 TO I
     ISTATE(5) = I
     ...
     J = ISTATE(ICUR)
     GOTO J

Such code doesn't work under `g77' unless `-fugly-assign' is specified
on the command-line, ensuring that the value of `I' referenced in the
second line is whatever value `g77' uses to designate statement label
`10', so the value may be copied into the `ISTATE' array, later
retrieved into a variable of the appropriate type (`J'), and used as
the target of an assigned-`GOTO' statement.

   *Note:* To avoid subtle program bugs, when `-fugly-assign' is
specified, `g77' requires the type of variables specified in
assigned-label contexts *must* be the same type returned by `%LOC()'.
On many systems, this type is effectively the same as
`INTEGER(KIND=1)', while, on others, it is effectively the same as
`INTEGER(KIND=2)'.

   Do *not* depend on `g77' actually writing valid pointers to these
variables, however.  While `g77' currently chooses that implementation,
it might be changed in the future.

   *Note Assigned Statement Labels (ASSIGN and GOTO): Assigned
Statement Labels, for implementation details on assigned-statement
labels.


File: g77.info,  Node: Compiler,  Next: Other Dialects,  Prev: Language,  Up: Top

The GNU Fortran Compiler
************************

   The GNU Fortran compiler, `g77', supports programs written in the
GNU Fortran language and in some other dialects of Fortran.

   Some aspects of how `g77' works are universal regardless of dialect,
and yet are not properly part of the GNU Fortran language itself.
These are described below.

   *Note: This portion of the documentation definitely needs a lot of
work!*

* Menu:

* Compiler Limits::
* Compiler Types::
* Compiler Constants::
* Compiler Intrinsics::


File: g77.info,  Node: Compiler Limits,  Next: Compiler Types,  Up: Compiler

Compiler Limits
===============

   `g77', as with GNU tools in general, imposes few arbitrary
restrictions on lengths of identifiers, number of continuation lines,
number of external symbols in a program, and so on.

   For example, some other Fortran compiler have an option (such as
`-NlX') to increase the limit on the number of continuation lines.
Also, some Fortran compilation systems have an option (such as `-NxX')
to increase the limit on the number of external symbols.

   `g77', `gcc', and GNU `ld' (the GNU linker) have no equivalent
options, since they do not impose arbitrary limits in these areas.

   `g77' does currently limit the number of dimensions in an array to
the same degree as do the Fortran standards--seven (7).  This
restriction might well be lifted in a future version.


File: g77.info,  Node: Compiler Types,  Next: Compiler Constants,  Prev: Compiler Limits,  Up: Compiler

Compiler Types
==============

   Fortran implementations have a fair amount of freedom given them by
the standard as far as how much storage space is used and how much
precision and range is offered by the various types such as
`LOGICAL(KIND=1)', `INTEGER(KIND=1)', `REAL(KIND=1)', `REAL(KIND=2)',
`COMPLEX(KIND=1)', and `CHARACTER'.  Further, many compilers offer
so-called `*N' notation, but the interpretation of N varies across
compilers and target architectures.

   The standard requires that `LOGICAL(KIND=1)', `INTEGER(KIND=1)', and
`REAL(KIND=1)' occupy the same amount of storage space, and that
`COMPLEX(KIND=1)' and `REAL(KIND=2)' take twice as much storage space
as `REAL(KIND=1)'.  Further, it requires that `COMPLEX(KIND=1)'
entities be ordered such that when a `COMPLEX(KIND=1)' variable is
storage-associated (such as via `EQUIVALENCE') with a two-element
`REAL(KIND=1)' array named `R', `R(1)' corresponds to the real element
and `R(2)' to the imaginary element of the `COMPLEX(KIND=1)' variable.

   (Few requirements as to precision or ranges of any of these are
placed on the implementation, nor is the relationship of storage sizes
of these types to the `CHARACTER' type specified, by the standard.)

   `g77' follows the above requirements, warning when compiling a
program requires placement of items in memory that contradict the
requirements of the target architecture.  (For example, a program can
require placement of a `REAL(KIND=2)' on a boundary that is not an even
multiple of its size, but still an even multiple of the size of a
`REAL(KIND=1)' variable.  On some target architectures, using the
canonical mapping of Fortran types to underlying architectural types,
such placement is prohibited by the machine definition or the
Application Binary Interface (ABI) in force for the configuration
defined for building `gcc' and `g77'.  `g77' warns about such
situations when it encounters them.)

   `g77' follows consistent rules for configuring the mapping between
Fortran types, including the `*N' notation, and the underlying
architectural types as accessed by a similarly-configured applicable
version of the `gcc' compiler.  These rules offer a widely portable,
consistent Fortran/C environment, although they might well conflict
with the expectations of users of Fortran compilers designed and
written for particular architectures.

   These rules are based on the configuration that is in force for the
version of `gcc' built in the same release as `g77' (and which was
therefore used to build both the `g77' compiler components and the
`libf2c' run-time library):

`REAL(KIND=1)'
     Same as `float' type.

`REAL(KIND=2)'
     Same as whatever floating-point type that is twice the size of a
     `float'--usually, this is a `double'.

`INTEGER(KIND=1)'
     Same as an integral type that is occupies the same amount of
     memory storage as `float'--usually, this is either an `int' or a
     `long int'.

`LOGICAL(KIND=1)'
     Same `gcc' type as `INTEGER(KIND=1)'.

`INTEGER(KIND=2)'
     Twice the size, and usually nearly twice the range, as
     `INTEGER(KIND=1)'--usually, this is either a `long int' or a `long
     long int'.

`LOGICAL(KIND=2)'
     Same `gcc' type as `INTEGER(KIND=2)'.

`INTEGER(KIND=3)'
     Same `gcc' type as signed `char'.

`LOGICAL(KIND=3)'
     Same `gcc' type as `INTEGER(KIND=3)'.

`INTEGER(KIND=6)'
     Twice the size, and usually nearly twice the range, as
     `INTEGER(KIND=3)'--usually, this is a `short'.

`LOGICAL(KIND=6)'
     Same `gcc' type as `INTEGER(KIND=6)'.

`COMPLEX(KIND=1)'
     Two `REAL(KIND=1)' scalars (one for the real part followed by one
     for the imaginary part).

`COMPLEX(KIND=2)'
     Two `REAL(KIND=2)' scalars.

`NUMERIC-TYPE*N'
     (Where NUMERIC-TYPE is any type other than `CHARACTER'.)  Same as
     whatever `gcc' type occupies N times the storage space of a `gcc'
     `char' item.

`DOUBLE PRECISION'
     Same as `REAL(KIND=2)'.

`DOUBLE COMPLEX'
     Same as `COMPLEX(KIND=2)'.

   Note that the above are proposed correspondences and might change in
future versions of `g77'--avoid writing code depending on them.

   Other types supported by `g77' are derived from gcc types such as
`char', `short', `int', `long int', `long long int', `long double', and
so on.  That is, whatever types `gcc' already supports, `g77' supports
now or probably will support in a future version.  The rules for the
`NUMERIC-TYPE*N' notation apply to these types, and new values for
`NUMERIC-TYPE(KIND=N)' will be assigned in a way that encourages
clarity, consistency, and portability.


File: g77.info,  Node: Compiler Constants,  Next: Compiler Intrinsics,  Prev: Compiler Types,  Up: Compiler

Compiler Constants
==================

   `g77' strictly assigns types to *all* constants not documented as
"typeless" (typeless constants including `'1'Z', for example).  Many
other Fortran compilers attempt to assign types to typed constants
based on their context.  This results in hard-to-find bugs, nonportable
code, and is not in the spirit (though it strictly follows the letter)
of the 77 and 90 standards.

   `g77' might offer, in a future release, explicit constructs by which
a wider variety of typeless constants may be specified, and/or
user-requested warnings indicating places where `g77' might differ from
how other compilers assign types to constants.

   *Note Context-Sensitive Constants::, for more information on this
issue.


File: g77.info,  Node: Compiler Intrinsics,  Prev: Compiler Constants,  Up: Compiler

Compiler Intrinsics
===================

   `g77' offers an ever-widening set of intrinsics.  Currently these
all are procedures (functions and subroutines).

   Some of these intrinsics are unimplemented, but their names reserved
to reduce future problems with existing code as they are implemented.
Others are implemented as part of the GNU Fortran language, while yet
others are provided for compatibility with other dialects of Fortran
but are not part of the GNU Fortran language.

   To manage these distinctions, `g77' provides intrinsic *groups*, a
facility that is simply an extension of the intrinsic groups provided
by the GNU Fortran language.

* Menu:

* Intrinsic Groups::  How intrinsics are grouped for easy management.
* Other Intrinsics::  Intrinsics other than those in the GNU
                       Fortran language.


File: g77.info,  Node: Intrinsic Groups,  Next: Other Intrinsics,  Up: Compiler Intrinsics

Intrinsic Groups
----------------

   A given specific intrinsic belongs in one or more groups.  Each
group is deleted, disabled, hidden, or enabled by default or a
command-line option.  The meaning of each term follows.

Deleted
     No intrinsics are recognized as belonging to that group.

Disabled
     Intrinsics are recognized as belonging to the group, but
     references to them (other than via the `INTRINSIC' statement) are
     disallowed through that group.

Hidden
     Intrinsics in that group are recognized and enabled (if
     implemented) *only* if the first mention of the actual name of an
     intrinsic in a program unit is in an `INTRINSIC' statement.

Enabled
     Intrinsics in that group are recognized and enabled (if
     implemented).

   The distinction between deleting and disabling a group is illustrated
by the following example.  Assume intrinsic `FOO' belongs only to group
`FGR'.  If group `FGR' is deleted, the following program unit will
successfully compile, because `FOO()' will be seen as a reference to an
external function named `FOO':

     PRINT *, FOO()
     END

If group `FGR' is disabled, compiling the above program will produce
diagnostics, either because the `FOO' intrinsic is improperly invoked
or, if properly invoked, it is not enabled.  To change the above
program so it references an external function `FOO' instead of the
disabled `FOO' intrinsic, add the following line to the top:

     EXTERNAL FOO

So, deleting a group tells `g77' to pretend as though the intrinsics in
that group do not exist at all, whereas disabling it tells `g77' to
recognize them as (disabled) intrinsics in intrinsic-like contexts.

   Hiding a group is like enabling it, but the intrinsic must be first
named in an `INTRINSIC' statement to be considered a reference to the
intrinsic rather than to an external procedure.  This might be the
"safest" way to treat a new group of intrinsics when compiling old
code, because it allows the old code to be generally written as if
those new intrinsics never existed, but to be changed to use them by
inserting `INTRINSIC' statements in the appropriate places.  However,
it should be the goal of development to use `EXTERNAL' for all names of
external procedures that might be intrinsic names.

   If an intrinsic is in more than one group, it is enabled if any of
its containing groups are enabled; if not so enabled, it is hidden if
any of its containing groups are hidden; if not so hidden, it is
disabled if any of its containing groups are disabled; if not so
disabled, it is deleted.  This extra complication is necessary because
some intrinsics, such as `IBITS', belong to more than one group, and
hence should be enabled if any of the groups to which they belong are
enabled, and so on.

   The groups are:

`badu77'
     UNIX intrinsics having inappropriate forms (usually functions that
     have intended side effects).

`gnu'
     Intrinsics the GNU Fortran language supports that are extensions to
     the Fortran standards (77 and 90).

`f2c'
     Intrinsics supported by AT&T's `f2c' converter and/or `libf2c'.

`f90'
     Fortran 90 intrinsics.

`mil'
     MIL-STD 1753 intrinsics (`MVBITS', `IAND', `BTEST', and so on).

`unix'
     UNIX intrinsics (`IARGC', `EXIT', `ERF', and so on).

`vxt'
     VAX/VMS FORTRAN (current as of v4) intrinsics.


File: g77.info,  Node: Other Intrinsics,  Prev: Intrinsic Groups,  Up: Compiler Intrinsics

Other Intrinsics
----------------

   `g77' supports intrinsics other than those in the GNU Fortran
language proper.  This set of intrinsics is described below.

   (Note that the empty lines appearing in the menu below are not
intentional--they result from a bug in the `makeinfo' program.)

* Menu:


* ACosD Intrinsic::     (Reserved for future use.)

* AIMax0 Intrinsic::    (Reserved for future use.)
* AIMin0 Intrinsic::    (Reserved for future use.)

* AJMax0 Intrinsic::    (Reserved for future use.)
* AJMin0 Intrinsic::    (Reserved for future use.)

* ASinD Intrinsic::     (Reserved for future use.)

* ATan2D Intrinsic::    (Reserved for future use.)
* ATanD Intrinsic::     (Reserved for future use.)

* BITest Intrinsic::    (Reserved for future use.)

* BJTest Intrinsic::    (Reserved for future use.)

* CDAbs Intrinsic::     Absolute value (archaic).
* CDCos Intrinsic::     Cosine (archaic).
* CDExp Intrinsic::     Exponential (archaic).
* CDLog Intrinsic::     Natural logarithm (archaic).
* CDSin Intrinsic::     Sine (archaic).
* CDSqRt Intrinsic::    Square root (archaic).

* ChDir Intrinsic (function):: Change directory.

* ChMod Intrinsic (function):: Change file modes.

* CosD Intrinsic::      (Reserved for future use.)

* DACosD Intrinsic::    (Reserved for future use.)

* DASinD Intrinsic::    (Reserved for future use.)

* DATan2D Intrinsic::   (Reserved for future use.)
* DATanD Intrinsic::    (Reserved for future use.)
* Date Intrinsic::      Get current date as dd-Mon-yy.

* DbleQ Intrinsic::     (Reserved for future use.)

* DCmplx Intrinsic::    Construct `COMPLEX(KIND=2)' value.
* DConjg Intrinsic::    Complex conjugate (archaic).

* DCosD Intrinsic::     (Reserved for future use.)

* DFloat Intrinsic::    Conversion (archaic).

* DFlotI Intrinsic::    (Reserved for future use.)
* DFlotJ Intrinsic::    (Reserved for future use.)

* DImag Intrinsic::     Convert/extract imaginary part of complex (archaic).

* DReal Intrinsic::     Convert value to type `REAL(KIND=2)'.

* DSinD Intrinsic::     (Reserved for future use.)

* DTanD Intrinsic::     (Reserved for future use.)

* Dtime Intrinsic (function):: Get elapsed time since last time.

* FGet Intrinsic (function):: Read a character from unit 5 stream-wise.

* FGetC Intrinsic (function):: Read a character stream-wise.

* FloatI Intrinsic::    (Reserved for future use.)
* FloatJ Intrinsic::    (Reserved for future use.)

* FPut Intrinsic (function):: Write a character to unit 6 stream-wise.

* FPutC Intrinsic (function):: Write a character stream-wise.

* IDate Intrinsic (VXT):: Get local time info (VAX/VMS).

* IIAbs Intrinsic::     (Reserved for future use.)
* IIAnd Intrinsic::     (Reserved for future use.)
* IIBClr Intrinsic::    (Reserved for future use.)
* IIBits Intrinsic::    (Reserved for future use.)
* IIBSet Intrinsic::    (Reserved for future use.)
* IIDiM Intrinsic::     (Reserved for future use.)
* IIDInt Intrinsic::    (Reserved for future use.)
* IIDNnt Intrinsic::    (Reserved for future use.)
* IIEOr Intrinsic::     (Reserved for future use.)
* IIFix Intrinsic::     (Reserved for future use.)
* IInt Intrinsic::      (Reserved for future use.)
* IIOr Intrinsic::      (Reserved for future use.)
* IIQint Intrinsic::    (Reserved for future use.)
* IIQNnt Intrinsic::    (Reserved for future use.)
* IIShftC Intrinsic::   (Reserved for future use.)
* IISign Intrinsic::    (Reserved for future use.)

* IMax0 Intrinsic::     (Reserved for future use.)
* IMax1 Intrinsic::     (Reserved for future use.)
* IMin0 Intrinsic::     (Reserved for future use.)
* IMin1 Intrinsic::     (Reserved for future use.)
* IMod Intrinsic::      (Reserved for future use.)

* INInt Intrinsic::     (Reserved for future use.)
* INot Intrinsic::      (Reserved for future use.)

* IZExt Intrinsic::     (Reserved for future use.)
* JIAbs Intrinsic::     (Reserved for future use.)
* JIAnd Intrinsic::     (Reserved for future use.)
* JIBClr Intrinsic::    (Reserved for future use.)
* JIBits Intrinsic::    (Reserved for future use.)
* JIBSet Intrinsic::    (Reserved for future use.)
* JIDiM Intrinsic::     (Reserved for future use.)
* JIDInt Intrinsic::    (Reserved for future use.)
* JIDNnt Intrinsic::    (Reserved for future use.)
* JIEOr Intrinsic::     (Reserved for future use.)
* JIFix Intrinsic::     (Reserved for future use.)
* JInt Intrinsic::      (Reserved for future use.)
* JIOr Intrinsic::      (Reserved for future use.)
* JIQint Intrinsic::    (Reserved for future use.)
* JIQNnt Intrinsic::    (Reserved for future use.)
* JIShft Intrinsic::    (Reserved for future use.)
* JIShftC Intrinsic::   (Reserved for future use.)
* JISign Intrinsic::    (Reserved for future use.)
* JMax0 Intrinsic::     (Reserved for future use.)
* JMax1 Intrinsic::     (Reserved for future use.)
* JMin0 Intrinsic::     (Reserved for future use.)
* JMin1 Intrinsic::     (Reserved for future use.)
* JMod Intrinsic::      (Reserved for future use.)
* JNInt Intrinsic::     (Reserved for future use.)
* JNot Intrinsic::      (Reserved for future use.)
* JZExt Intrinsic::     (Reserved for future use.)

* Kill Intrinsic (function):: Signal a process.

* Link Intrinsic (function):: Make hard link in file system.

* QAbs Intrinsic::      (Reserved for future use.)
* QACos Intrinsic::     (Reserved for future use.)
* QACosD Intrinsic::    (Reserved for future use.)
* QASin Intrinsic::     (Reserved for future use.)
* QASinD Intrinsic::    (Reserved for future use.)
* QATan Intrinsic::     (Reserved for future use.)
* QATan2 Intrinsic::    (Reserved for future use.)
* QATan2D Intrinsic::   (Reserved for future use.)
* QATanD Intrinsic::    (Reserved for future use.)
* QCos Intrinsic::      (Reserved for future use.)
* QCosD Intrinsic::     (Reserved for future use.)
* QCosH Intrinsic::     (Reserved for future use.)
* QDiM Intrinsic::      (Reserved for future use.)
* QExp Intrinsic::      (Reserved for future use.)
* QExt Intrinsic::      (Reserved for future use.)
* QExtD Intrinsic::     (Reserved for future use.)
* QFloat Intrinsic::    (Reserved for future use.)
* QInt Intrinsic::      (Reserved for future use.)
* QLog Intrinsic::      (Reserved for future use.)
* QLog10 Intrinsic::    (Reserved for future use.)
* QMax1 Intrinsic::     (Reserved for future use.)
* QMin1 Intrinsic::     (Reserved for future use.)
* QMod Intrinsic::      (Reserved for future use.)
* QNInt Intrinsic::     (Reserved for future use.)
* QSin Intrinsic::      (Reserved for future use.)
* QSinD Intrinsic::     (Reserved for future use.)
* QSinH Intrinsic::     (Reserved for future use.)
* QSqRt Intrinsic::     (Reserved for future use.)
* QTan Intrinsic::      (Reserved for future use.)
* QTanD Intrinsic::     (Reserved for future use.)
* QTanH Intrinsic::     (Reserved for future use.)

* Rename Intrinsic (function):: Rename file.

* Secnds Intrinsic::    Get local time offset since midnight.

* Signal Intrinsic (function):: Muck with signal handling.

* SinD Intrinsic::      (Reserved for future use.)

* SnglQ Intrinsic::     (Reserved for future use.)

* SymLnk Intrinsic (function):: Make symbolic link in file system.

* System Intrinsic (function):: Invoke shell (system) command.

* TanD Intrinsic::      (Reserved for future use.)

* Time Intrinsic (VXT):: Get the time as a character value.

* UMask Intrinsic (function):: Set file creation permissions mask.

* Unlink Intrinsic (function):: Unlink file.

* ZExt Intrinsic::      (Reserved for future use.)


File: g77.info,  Node: ACosD Intrinsic,  Next: AIMax0 Intrinsic,  Up: Other Intrinsics

ACosD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ACosD' to use this name for an
external procedure.


File: g77.info,  Node: AIMax0 Intrinsic,  Next: AIMin0 Intrinsic,  Prev: ACosD Intrinsic,  Up: Other Intrinsics

AIMax0 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AIMax0' to use this name for an
external procedure.


File: g77.info,  Node: AIMin0 Intrinsic,  Next: AJMax0 Intrinsic,  Prev: AIMax0 Intrinsic,  Up: Other Intrinsics

AIMin0 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AIMin0' to use this name for an
external procedure.


File: g77.info,  Node: AJMax0 Intrinsic,  Next: AJMin0 Intrinsic,  Prev: AIMin0 Intrinsic,  Up: Other Intrinsics

AJMax0 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AJMax0' to use this name for an
external procedure.


File: g77.info,  Node: AJMin0 Intrinsic,  Next: ASinD Intrinsic,  Prev: AJMax0 Intrinsic,  Up: Other Intrinsics

AJMin0 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AJMin0' to use this name for an
external procedure.


File: g77.info,  Node: ASinD Intrinsic,  Next: ATan2D Intrinsic,  Prev: AJMin0 Intrinsic,  Up: Other Intrinsics

ASinD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ASinD' to use this name for an
external procedure.


File: g77.info,  Node: ATan2D Intrinsic,  Next: ATanD Intrinsic,  Prev: ASinD Intrinsic,  Up: Other Intrinsics

ATan2D Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ATan2D' to use this name for an
external procedure.


File: g77.info,  Node: ATanD Intrinsic,  Next: BITest Intrinsic,  Prev: ATan2D Intrinsic,  Up: Other Intrinsics

ATanD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ATanD' to use this name for an
external procedure.


File: g77.info,  Node: BITest Intrinsic,  Next: BJTest Intrinsic,  Prev: ATanD Intrinsic,  Up: Other Intrinsics

BITest Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL BITest' to use this name for an
external procedure.


File: g77.info,  Node: BJTest Intrinsic,  Next: CDAbs Intrinsic,  Prev: BITest Intrinsic,  Up: Other Intrinsics

BJTest Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL BJTest' to use this name for an
external procedure.


File: g77.info,  Node: CDAbs Intrinsic,  Next: CDCos Intrinsic,  Prev: BJTest Intrinsic,  Up: Other Intrinsics

CDAbs Intrinsic
...............

     CDAbs(A)

CDAbs: `REAL(KIND=2)' function.

A: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77.info,  Node: CDCos Intrinsic,  Next: CDExp Intrinsic,  Prev: CDAbs Intrinsic,  Up: Other Intrinsics

CDCos Intrinsic
...............

     CDCos(X)

CDCos: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77.info,  Node: CDExp Intrinsic,  Next: CDLog Intrinsic,  Prev: CDCos Intrinsic,  Up: Other Intrinsics

CDExp Intrinsic
...............

     CDExp(X)

CDExp: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77.info,  Node: CDLog Intrinsic,  Next: CDSin Intrinsic,  Prev: CDExp Intrinsic,  Up: Other Intrinsics

CDLog Intrinsic
...............

     CDLog(X)

CDLog: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77.info,  Node: CDSin Intrinsic,  Next: CDSqRt Intrinsic,  Prev: CDLog Intrinsic,  Up: Other Intrinsics

CDSin Intrinsic
...............

     CDSin(X)

CDSin: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77.info,  Node: CDSqRt Intrinsic,  Next: ChDir Intrinsic (function),  Prev: CDSin Intrinsic,  Up: Other Intrinsics

CDSqRt Intrinsic
................

     CDSqRt(X)

CDSqRt: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77.info,  Node: ChDir Intrinsic (function),  Next: ChMod Intrinsic (function),  Prev: CDSqRt Intrinsic,  Up: Other Intrinsics

ChDir Intrinsic (function)
..........................

     ChDir(DIR)

ChDir: `INTEGER(KIND=1)' function.

DIR: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sets the current working directory to be DIR.  Returns 0 on success
or a non-zero error code.  See `chdir(3)'.

   *Caution:* Using this routine during I/O to a unit connected with a
non-absolute file name can cause subsequent I/O on such a unit to fail
because the I/O library may reopen files by name.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note ChDir
Intrinsic (subroutine)::.


File: g77.info,  Node: ChMod Intrinsic (function),  Next: CosD Intrinsic,  Prev: ChDir Intrinsic (function),  Up: Other Intrinsics

ChMod Intrinsic (function)
..........................

     ChMod(NAME, MODE)

ChMod: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Changes the access mode of file NAME according to the specification
MODE, which is given in the format of `chmod(1)'.  A null character
(`CHAR(0)') marks the end of the name in NAME--otherwise, trailing
blanks in NAME are ignored.  Currently, NAME must not contain the
single quote character.

   Returns 0 on success or a non-zero error code otherwise.

   Note that this currently works by actually invoking `/bin/chmod' (or
the `chmod' found when the library was configured) and so may fail in
some circumstances and will, anyway, be slow.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note ChMod
Intrinsic (subroutine)::.


File: g77.info,  Node: CosD Intrinsic,  Next: DACosD Intrinsic,  Prev: ChMod Intrinsic (function),  Up: Other Intrinsics

CosD Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL CosD' to use this name for an
external procedure.


File: g77.info,  Node: DACosD Intrinsic,  Next: DASinD Intrinsic,  Prev: CosD Intrinsic,  Up: Other Intrinsics

DACosD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DACosD' to use this name for an
external procedure.


File: g77.info,  Node: DASinD Intrinsic,  Next: DATan2D Intrinsic,  Prev: DACosD Intrinsic,  Up: Other Intrinsics

DASinD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DASinD' to use this name for an
external procedure.


File: g77.info,  Node: DATan2D Intrinsic,  Next: DATanD Intrinsic,  Prev: DASinD Intrinsic,  Up: Other Intrinsics

DATan2D Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DATan2D' to use this name for
an external procedure.


File: g77.info,  Node: DATanD Intrinsic,  Next: Date Intrinsic,  Prev: DATan2D Intrinsic,  Up: Other Intrinsics

DATanD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DATanD' to use this name for an
external procedure.


File: g77.info,  Node: Date Intrinsic,  Next: DbleQ Intrinsic,  Prev: DATanD Intrinsic,  Up: Other Intrinsics

Date Intrinsic
..............

     CALL Date(DATE)

DATE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns DATE in the form `DD-MMM-YY', representing the numeric day
of the month DD, a three-character abbreviation of the month name MMM
and the last two digits of the year YY, e.g. `25-Nov-96'.

   This intrinsic is not recommended, due to the year 2000 approaching.
*Note CTime Intrinsic (subroutine)::, for information on obtaining more
digits for the current (or any) date.


File: g77.info,  Node: DbleQ Intrinsic,  Next: DCmplx Intrinsic,  Prev: Date Intrinsic,  Up: Other Intrinsics

DbleQ Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DbleQ' to use this name for an
external procedure.


File: g77.info,  Node: DCmplx Intrinsic,  Next: DConjg Intrinsic,  Prev: DbleQ Intrinsic,  Up: Other Intrinsics

DCmplx Intrinsic
................

     DCmplx(X, Y)

DCmplx: `COMPLEX(KIND=2)' function.

X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX');
scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   If X is not type `COMPLEX', constructs a value of type
`COMPLEX(KIND=2)' from the real and imaginary values specified by X and
Y, respectively.  If Y is omitted, `0D0' is assumed.

   If X is type `COMPLEX', converts it to type `COMPLEX(KIND=2)'.

   Although this intrinsic is not standard Fortran, it is a popular
extension offered by many compilers that support `DOUBLE COMPLEX',
since it offers the easiest way to convert to `DOUBLE COMPLEX' without
using Fortran 90 features (such as the `KIND=' argument to the
`CMPLX()' intrinsic).

   (`CMPLX(0D0, 0D0)' returns a single-precision `COMPLEX' result, as
required by standard FORTRAN 77.  That's why so many compilers provide
`DCMPLX()', since `DCMPLX(0D0, 0D0)' returns a `DOUBLE COMPLEX' result.
Still, `DCMPLX()' converts even `REAL*16' arguments to their `REAL*8'
equivalents in most dialects of Fortran, so neither it nor `CMPLX()'
allow easy construction of arbitrary-precision values without
potentially forcing a conversion involving extending or reducing
precision.  GNU Fortran provides such an intrinsic, called `COMPLEX()'.)

   *Note Complex Intrinsic::, for information on easily constructing a
`COMPLEX' value of arbitrary precision from `REAL' arguments.


File: g77.info,  Node: DConjg Intrinsic,  Next: DCosD Intrinsic,  Prev: DCmplx Intrinsic,  Up: Other Intrinsics

DConjg Intrinsic
................

     DConjg(Z)

DConjg: `COMPLEX(KIND=2)' function.

Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `CONJG()' that is specific to one type for Z.  *Note
Conjg Intrinsic::.


File: g77.info,  Node: DCosD Intrinsic,  Next: DFloat Intrinsic,  Prev: DConjg Intrinsic,  Up: Other Intrinsics

DCosD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DCosD' to use this name for an
external procedure.


File: g77.info,  Node: DFloat Intrinsic,  Next: DFlotI Intrinsic,  Prev: DCosD Intrinsic,  Up: Other Intrinsics

DFloat Intrinsic
................

     DFloat(A)

DFloat: `REAL(KIND=2)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77.info,  Node: DFlotI Intrinsic,  Next: DFlotJ Intrinsic,  Prev: DFloat Intrinsic,  Up: Other Intrinsics

DFlotI Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DFlotI' to use this name for an
external procedure.


File: g77.info,  Node: DFlotJ Intrinsic,  Next: DImag Intrinsic,  Prev: DFlotI Intrinsic,  Up: Other Intrinsics

DFlotJ Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DFlotJ' to use this name for an
external procedure.


File: g77.info,  Node: DImag Intrinsic,  Next: DReal Intrinsic,  Prev: DFlotJ Intrinsic,  Up: Other Intrinsics

DImag Intrinsic
...............

     DImag(Z)

DImag: `REAL(KIND=2)' function.

Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `AIMAG()' that is specific to one type for Z.  *Note
AImag Intrinsic::.


File: g77.info,  Node: DReal Intrinsic,  Next: DSinD Intrinsic,  Prev: DImag Intrinsic,  Up: Other Intrinsics

DReal Intrinsic
...............

     DReal(A)

DReal: `REAL(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `vxt'.

Description:

   Converts A to `REAL(KIND=2)'.

   If A is type `COMPLEX', its real part is converted (if necessary) to
`REAL(KIND=2)', and its imaginary part is disregarded.

   Although this intrinsic is not standard Fortran, it is a popular
extension offered by many compilers that support `DOUBLE COMPLEX',
since it offers the easiest way to extract the real part of a `DOUBLE
COMPLEX' value without using the Fortran 90 `REAL()' intrinsic in a way
that produces a return value inconsistent with the way many FORTRAN 77
compilers handle `REAL()' of a `DOUBLE COMPLEX' value.

   *Note RealPart Intrinsic::, for information on a GNU Fortran
intrinsic that avoids these areas of confusion.

   *Note Dble Intrinsic::, for information on the standard FORTRAN 77
replacement for `DREAL()'.

   *Note REAL() and AIMAG() of Complex::, for more information on this
issue.


File: g77.info,  Node: DSinD Intrinsic,  Next: DTanD Intrinsic,  Prev: DReal Intrinsic,  Up: Other Intrinsics

DSinD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DSinD' to use this name for an
external procedure.


File: g77.info,  Node: DTanD Intrinsic,  Next: Dtime Intrinsic (function),  Prev: DSinD Intrinsic,  Up: Other Intrinsics

DTanD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DTanD' to use this name for an
external procedure.


File: g77.info,  Node: Dtime Intrinsic (function),  Next: FGet Intrinsic (function),  Prev: DTanD Intrinsic,  Up: Other Intrinsics

Dtime Intrinsic (function)
..........................

     Dtime(TARRAY)

Dtime: `REAL(KIND=1)' function.

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Initially, return the number of seconds of runtime since the start
of the process's execution as the function value, and the user and
system components of this in `TARRAY(1)' and `TARRAY(2)' respectively.
The functions' value is equal to `TARRAY(1) + TARRAY(2)'.

   Subsequent invocations of `DTIME()' return values accumulated since
the previous invocation.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Dtime
Intrinsic (subroutine)::.


File: g77.info,  Node: FGet Intrinsic (function),  Next: FGetC Intrinsic (function),  Prev: Dtime Intrinsic (function),  Up: Other Intrinsics

FGet Intrinsic (function)
.........................

     FGet(C)

FGet: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Reads a single character into C in stream mode from unit 5
(by-passing normal formatted input) using `getc(3)'.  Returns 0 on
success, -1 on end-of-file, and the error code from `ferror(3)'
otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGet
Intrinsic (subroutine)::.


File: g77.info,  Node: FGetC Intrinsic (function),  Next: FloatI Intrinsic,  Prev: FGet Intrinsic (function),  Up: Other Intrinsics

FGetC Intrinsic (function)
..........................

     FGetC(UNIT, C)

FGetC: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Reads a single character into C in stream mode from unit UNIT
(by-passing normal formatted output) using `getc(3)'.  Returns 0 on
success, -1 on end-of-file, and the error code from `ferror(3)'
otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGetC
Intrinsic (subroutine)::.


File: g77.info,  Node: FloatI Intrinsic,  Next: FloatJ Intrinsic,  Prev: FGetC Intrinsic (function),  Up: Other Intrinsics

FloatI Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL FloatI' to use this name for an
external procedure.


File: g77.info,  Node: FloatJ Intrinsic,  Next: FPut Intrinsic (function),  Prev: FloatI Intrinsic,  Up: Other Intrinsics

FloatJ Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL FloatJ' to use this name for an
external procedure.


File: g77.info,  Node: FPut Intrinsic (function),  Next: FPutC Intrinsic (function),  Prev: FloatJ Intrinsic,  Up: Other Intrinsics

FPut Intrinsic (function)
.........................

     FPut(C)

FPut: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Writes the single character C in stream mode to unit 6 (by-passing
normal formatted output) using `getc(3)'.  Returns 0 on success, the
error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPut
Intrinsic (subroutine)::.


File: g77.info,  Node: FPutC Intrinsic (function),  Next: IDate Intrinsic (VXT),  Prev: FPut Intrinsic (function),  Up: Other Intrinsics

FPutC Intrinsic (function)
..........................

     FPutC(UNIT, C)

FPutC: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Writes the single character C in stream mode to unit UNIT
(by-passing normal formatted output) using `putc(3)'.  Returns 0 on
success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPutC
Intrinsic (subroutine)::.


File: g77.info,  Node: IDate Intrinsic (VXT),  Next: IIAbs Intrinsic,  Prev: FPutC Intrinsic (function),  Up: Other Intrinsics

IDate Intrinsic (VXT)
.....................

     CALL IDate(M, D, Y)

M: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

D: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Y: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns the numerical values of the current local time.  The month
(in the range 1-12) is returned in M, the day (in the range 1-7) in D,
and the year in Y (in the range 0-99).

   This intrinsic is not recommended, due to the year 2000 approaching.

   For information on other intrinsics with the same name: *Note IDate
Intrinsic (UNIX)::.


File: g77.info,  Node: IIAbs Intrinsic,  Next: IIAnd Intrinsic,  Prev: IDate Intrinsic (VXT),  Up: Other Intrinsics

IIAbs Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIAbs' to use this name for an
external procedure.


File: g77.info,  Node: IIAnd Intrinsic,  Next: IIBClr Intrinsic,  Prev: IIAbs Intrinsic,  Up: Other Intrinsics

IIAnd Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIAnd' to use this name for an
external procedure.


File: g77.info,  Node: IIBClr Intrinsic,  Next: IIBits Intrinsic,  Prev: IIAnd Intrinsic,  Up: Other Intrinsics

IIBClr Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBClr' to use this name for an
external procedure.


File: g77.info,  Node: IIBits Intrinsic,  Next: IIBSet Intrinsic,  Prev: IIBClr Intrinsic,  Up: Other Intrinsics

IIBits Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBits' to use this name for an
external procedure.


File: g77.info,  Node: IIBSet Intrinsic,  Next: IIDiM Intrinsic,  Prev: IIBits Intrinsic,  Up: Other Intrinsics

IIBSet Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBSet' to use this name for an
external procedure.


File: g77.info,  Node: IIDiM Intrinsic,  Next: IIDInt Intrinsic,  Prev: IIBSet Intrinsic,  Up: Other Intrinsics

IIDiM Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDiM' to use this name for an
external procedure.


File: g77.info,  Node: IIDInt Intrinsic,  Next: IIDNnt Intrinsic,  Prev: IIDiM Intrinsic,  Up: Other Intrinsics

IIDInt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDInt' to use this name for an
external procedure.


File: g77.info,  Node: IIDNnt Intrinsic,  Next: IIEOr Intrinsic,  Prev: IIDInt Intrinsic,  Up: Other Intrinsics

IIDNnt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDNnt' to use this name for an
external procedure.


File: g77.info,  Node: IIEOr Intrinsic,  Next: IIFix Intrinsic,  Prev: IIDNnt Intrinsic,  Up: Other Intrinsics

IIEOr Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIEOr' to use this name for an
external procedure.


File: g77.info,  Node: IIFix Intrinsic,  Next: IInt Intrinsic,  Prev: IIEOr Intrinsic,  Up: Other Intrinsics

IIFix Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIFix' to use this name for an
external procedure.


File: g77.info,  Node: IInt Intrinsic,  Next: IIOr Intrinsic,  Prev: IIFix Intrinsic,  Up: Other Intrinsics

IInt Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IInt' to use this name for an
external procedure.


File: g77.info,  Node: IIOr Intrinsic,  Next: IIQint Intrinsic,  Prev: IInt Intrinsic,  Up: Other Intrinsics

IIOr Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIOr' to use this name for an
external procedure.


File: g77.info,  Node: IIQint Intrinsic,  Next: IIQNnt Intrinsic,  Prev: IIOr Intrinsic,  Up: Other Intrinsics

IIQint Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIQint' to use this name for an
external procedure.


File: g77.info,  Node: IIQNnt Intrinsic,  Next: IIShftC Intrinsic,  Prev: IIQint Intrinsic,  Up: Other Intrinsics

IIQNnt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIQNnt' to use this name for an
external procedure.


File: g77.info,  Node: IIShftC Intrinsic,  Next: IISign Intrinsic,  Prev: IIQNnt Intrinsic,  Up: Other Intrinsics

IIShftC Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIShftC' to use this name for
an external procedure.


File: g77.info,  Node: IISign Intrinsic,  Next: IMax0 Intrinsic,  Prev: IIShftC Intrinsic,  Up: Other Intrinsics

IISign Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IISign' to use this name for an
external procedure.


File: g77.info,  Node: IMax0 Intrinsic,  Next: IMax1 Intrinsic,  Prev: IISign Intrinsic,  Up: Other Intrinsics

IMax0 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMax0' to use this name for an
external procedure.


File: g77.info,  Node: IMax1 Intrinsic,  Next: IMin0 Intrinsic,  Prev: IMax0 Intrinsic,  Up: Other Intrinsics

IMax1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMax1' to use this name for an
external procedure.


File: g77.info,  Node: IMin0 Intrinsic,  Next: IMin1 Intrinsic,  Prev: IMax1 Intrinsic,  Up: Other Intrinsics

IMin0 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMin0' to use this name for an
external procedure.


File: g77.info,  Node: IMin1 Intrinsic,  Next: IMod Intrinsic,  Prev: IMin0 Intrinsic,  Up: Other Intrinsics

IMin1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMin1' to use this name for an
external procedure.


File: g77.info,  Node: IMod Intrinsic,  Next: INInt Intrinsic,  Prev: IMin1 Intrinsic,  Up: Other Intrinsics

IMod Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMod' to use this name for an
external procedure.


File: g77.info,  Node: INInt Intrinsic,  Next: INot Intrinsic,  Prev: IMod Intrinsic,  Up: Other Intrinsics

INInt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL INInt' to use this name for an
external procedure.


File: g77.info,  Node: INot Intrinsic,  Next: IZExt Intrinsic,  Prev: INInt Intrinsic,  Up: Other Intrinsics

INot Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL INot' to use this name for an
external procedure.


File: g77.info,  Node: IZExt Intrinsic,  Next: JIAbs Intrinsic,  Prev: INot Intrinsic,  Up: Other Intrinsics

IZExt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IZExt' to use this name for an
external procedure.


File: g77.info,  Node: JIAbs Intrinsic,  Next: JIAnd Intrinsic,  Prev: IZExt Intrinsic,  Up: Other Intrinsics

JIAbs Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIAbs' to use this name for an
external procedure.


File: g77.info,  Node: JIAnd Intrinsic,  Next: JIBClr Intrinsic,  Prev: JIAbs Intrinsic,  Up: Other Intrinsics

JIAnd Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIAnd' to use this name for an
external procedure.


File: g77.info,  Node: JIBClr Intrinsic,  Next: JIBits Intrinsic,  Prev: JIAnd Intrinsic,  Up: Other Intrinsics

JIBClr Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBClr' to use this name for an
external procedure.


File: g77.info,  Node: JIBits Intrinsic,  Next: JIBSet Intrinsic,  Prev: JIBClr Intrinsic,  Up: Other Intrinsics

JIBits Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBits' to use this name for an
external procedure.


File: g77.info,  Node: JIBSet Intrinsic,  Next: JIDiM Intrinsic,  Prev: JIBits Intrinsic,  Up: Other Intrinsics

JIBSet Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBSet' to use this name for an
external procedure.


File: g77.info,  Node: JIDiM Intrinsic,  Next: JIDInt Intrinsic,  Prev: JIBSet Intrinsic,  Up: Other Intrinsics

JIDiM Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDiM' to use this name for an
external procedure.


File: g77.info,  Node: JIDInt Intrinsic,  Next: JIDNnt Intrinsic,  Prev: JIDiM Intrinsic,  Up: Other Intrinsics

JIDInt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDInt' to use this name for an
external procedure.


File: g77.info,  Node: JIDNnt Intrinsic,  Next: JIEOr Intrinsic,  Prev: JIDInt Intrinsic,  Up: Other Intrinsics

JIDNnt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDNnt' to use this name for an
external procedure.


File: g77.info,  Node: JIEOr Intrinsic,  Next: JIFix Intrinsic,  Prev: JIDNnt Intrinsic,  Up: Other Intrinsics

JIEOr Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIEOr' to use this name for an
external procedure.


File: g77.info,  Node: JIFix Intrinsic,  Next: JInt Intrinsic,  Prev: JIEOr Intrinsic,  Up: Other Intrinsics

JIFix Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIFix' to use this name for an
external procedure.


File: g77.info,  Node: JInt Intrinsic,  Next: JIOr Intrinsic,  Prev: JIFix Intrinsic,  Up: Other Intrinsics

JInt Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JInt' to use this name for an
external procedure.


File: g77.info,  Node: JIOr Intrinsic,  Next: JIQint Intrinsic,  Prev: JInt Intrinsic,  Up: Other Intrinsics

JIOr Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIOr' to use this name for an
external procedure.


File: g77.info,  Node: JIQint Intrinsic,  Next: JIQNnt Intrinsic,  Prev: JIOr Intrinsic,  Up: Other Intrinsics

JIQint Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIQint' to use this name for an
external procedure.


File: g77.info,  Node: JIQNnt Intrinsic,  Next: JIShft Intrinsic,  Prev: JIQint Intrinsic,  Up: Other Intrinsics

JIQNnt Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIQNnt' to use this name for an
external procedure.


File: g77.info,  Node: JIShft Intrinsic,  Next: JIShftC Intrinsic,  Prev: JIQNnt Intrinsic,  Up: Other Intrinsics

JIShft Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIShft' to use this name for an
external procedure.


File: g77.info,  Node: JIShftC Intrinsic,  Next: JISign Intrinsic,  Prev: JIShft Intrinsic,  Up: Other Intrinsics

JIShftC Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIShftC' to use this name for
an external procedure.


File: g77.info,  Node: JISign Intrinsic,  Next: JMax0 Intrinsic,  Prev: JIShftC Intrinsic,  Up: Other Intrinsics

JISign Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JISign' to use this name for an
external procedure.


File: g77.info,  Node: JMax0 Intrinsic,  Next: JMax1 Intrinsic,  Prev: JISign Intrinsic,  Up: Other Intrinsics

JMax0 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMax0' to use this name for an
external procedure.


File: g77.info,  Node: JMax1 Intrinsic,  Next: JMin0 Intrinsic,  Prev: JMax0 Intrinsic,  Up: Other Intrinsics

JMax1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMax1' to use this name for an
external procedure.


File: g77.info,  Node: JMin0 Intrinsic,  Next: JMin1 Intrinsic,  Prev: JMax1 Intrinsic,  Up: Other Intrinsics

JMin0 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMin0' to use this name for an
external procedure.


File: g77.info,  Node: JMin1 Intrinsic,  Next: JMod Intrinsic,  Prev: JMin0 Intrinsic,  Up: Other Intrinsics

JMin1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMin1' to use this name for an
external procedure.


File: g77.info,  Node: JMod Intrinsic,  Next: JNInt Intrinsic,  Prev: JMin1 Intrinsic,  Up: Other Intrinsics

JMod Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMod' to use this name for an
external procedure.


File: g77.info,  Node: JNInt Intrinsic,  Next: JNot Intrinsic,  Prev: JMod Intrinsic,  Up: Other Intrinsics

JNInt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JNInt' to use this name for an
external procedure.


File: g77.info,  Node: JNot Intrinsic,  Next: JZExt Intrinsic,  Prev: JNInt Intrinsic,  Up: Other Intrinsics

JNot Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JNot' to use this name for an
external procedure.


File: g77.info,  Node: JZExt Intrinsic,  Next: Kill Intrinsic (function),  Prev: JNot Intrinsic,  Up: Other Intrinsics

JZExt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JZExt' to use this name for an
external procedure.


File: g77.info,  Node: Kill Intrinsic (function),  Next: Link Intrinsic (function),  Prev: JZExt Intrinsic,  Up: Other Intrinsics

Kill Intrinsic (function)
.........................

     Kill(PID, SIGNAL)

Kill: `INTEGER(KIND=1)' function.

PID: `INTEGER'; scalar; INTENT(IN).

SIGNAL: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sends the signal specified by SIGNAL to the process PID.  Returns 0
on success or a non-zero error code.  See `kill(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Kill
Intrinsic (subroutine)::.


File: g77.info,  Node: Link Intrinsic (function),  Next: QAbs Intrinsic,  Prev: Kill Intrinsic (function),  Up: Other Intrinsics

Link Intrinsic (function)
.........................

     Link(PATH1, PATH2)

Link: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Makes a (hard) link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  Returns 0 on success
or a non-zero error code.  See `link(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Link
Intrinsic (subroutine)::.


File: g77.info,  Node: QAbs Intrinsic,  Next: QACos Intrinsic,  Prev: Link Intrinsic (function),  Up: Other Intrinsics

QAbs Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QAbs' to use this name for an
external procedure.


File: g77.info,  Node: QACos Intrinsic,  Next: QACosD Intrinsic,  Prev: QAbs Intrinsic,  Up: Other Intrinsics

QACos Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QACos' to use this name for an
external procedure.


File: g77.info,  Node: QACosD Intrinsic,  Next: QASin Intrinsic,  Prev: QACos Intrinsic,  Up: Other Intrinsics

QACosD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QACosD' to use this name for an
external procedure.


File: g77.info,  Node: QASin Intrinsic,  Next: QASinD Intrinsic,  Prev: QACosD Intrinsic,  Up: Other Intrinsics

QASin Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QASin' to use this name for an
external procedure.


File: g77.info,  Node: QASinD Intrinsic,  Next: QATan Intrinsic,  Prev: QASin Intrinsic,  Up: Other Intrinsics

QASinD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QASinD' to use this name for an
external procedure.


File: g77.info,  Node: QATan Intrinsic,  Next: QATan2 Intrinsic,  Prev: QASinD Intrinsic,  Up: Other Intrinsics

QATan Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan' to use this name for an
external procedure.


File: g77.info,  Node: QATan2 Intrinsic,  Next: QATan2D Intrinsic,  Prev: QATan Intrinsic,  Up: Other Intrinsics

QATan2 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan2' to use this name for an
external procedure.


File: g77.info,  Node: QATan2D Intrinsic,  Next: QATanD Intrinsic,  Prev: QATan2 Intrinsic,  Up: Other Intrinsics

QATan2D Intrinsic
.................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan2D' to use this name for
an external procedure.


File: g77.info,  Node: QATanD Intrinsic,  Next: QCos Intrinsic,  Prev: QATan2D Intrinsic,  Up: Other Intrinsics

QATanD Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATanD' to use this name for an
external procedure.


File: g77.info,  Node: QCos Intrinsic,  Next: QCosD Intrinsic,  Prev: QATanD Intrinsic,  Up: Other Intrinsics

QCos Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCos' to use this name for an
external procedure.


File: g77.info,  Node: QCosD Intrinsic,  Next: QCosH Intrinsic,  Prev: QCos Intrinsic,  Up: Other Intrinsics

QCosD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCosD' to use this name for an
external procedure.


File: g77.info,  Node: QCosH Intrinsic,  Next: QDiM Intrinsic,  Prev: QCosD Intrinsic,  Up: Other Intrinsics

QCosH Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCosH' to use this name for an
external procedure.


File: g77.info,  Node: QDiM Intrinsic,  Next: QExp Intrinsic,  Prev: QCosH Intrinsic,  Up: Other Intrinsics

QDiM Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QDiM' to use this name for an
external procedure.


File: g77.info,  Node: QExp Intrinsic,  Next: QExt Intrinsic,  Prev: QDiM Intrinsic,  Up: Other Intrinsics

QExp Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExp' to use this name for an
external procedure.


File: g77.info,  Node: QExt Intrinsic,  Next: QExtD Intrinsic,  Prev: QExp Intrinsic,  Up: Other Intrinsics

QExt Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExt' to use this name for an
external procedure.


File: g77.info,  Node: QExtD Intrinsic,  Next: QFloat Intrinsic,  Prev: QExt Intrinsic,  Up: Other Intrinsics

QExtD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExtD' to use this name for an
external procedure.


File: g77.info,  Node: QFloat Intrinsic,  Next: QInt Intrinsic,  Prev: QExtD Intrinsic,  Up: Other Intrinsics

QFloat Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QFloat' to use this name for an
external procedure.


File: g77.info,  Node: QInt Intrinsic,  Next: QLog Intrinsic,  Prev: QFloat Intrinsic,  Up: Other Intrinsics

QInt Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QInt' to use this name for an
external procedure.


File: g77.info,  Node: QLog Intrinsic,  Next: QLog10 Intrinsic,  Prev: QInt Intrinsic,  Up: Other Intrinsics

QLog Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QLog' to use this name for an
external procedure.


File: g77.info,  Node: QLog10 Intrinsic,  Next: QMax1 Intrinsic,  Prev: QLog Intrinsic,  Up: Other Intrinsics

QLog10 Intrinsic
................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QLog10' to use this name for an
external procedure.


File: g77.info,  Node: QMax1 Intrinsic,  Next: QMin1 Intrinsic,  Prev: QLog10 Intrinsic,  Up: Other Intrinsics

QMax1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMax1' to use this name for an
external procedure.


File: g77.info,  Node: QMin1 Intrinsic,  Next: QMod Intrinsic,  Prev: QMax1 Intrinsic,  Up: Other Intrinsics

QMin1 Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMin1' to use this name for an
external procedure.


File: g77.info,  Node: QMod Intrinsic,  Next: QNInt Intrinsic,  Prev: QMin1 Intrinsic,  Up: Other Intrinsics

QMod Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMod' to use this name for an
external procedure.


File: g77.info,  Node: QNInt Intrinsic,  Next: QSin Intrinsic,  Prev: QMod Intrinsic,  Up: Other Intrinsics

QNInt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QNInt' to use this name for an
external procedure.


File: g77.info,  Node: QSin Intrinsic,  Next: QSinD Intrinsic,  Prev: QNInt Intrinsic,  Up: Other Intrinsics

QSin Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSin' to use this name for an
external procedure.


File: g77.info,  Node: QSinD Intrinsic,  Next: QSinH Intrinsic,  Prev: QSin Intrinsic,  Up: Other Intrinsics

QSinD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSinD' to use this name for an
external procedure.


File: g77.info,  Node: QSinH Intrinsic,  Next: QSqRt Intrinsic,  Prev: QSinD Intrinsic,  Up: Other Intrinsics

QSinH Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSinH' to use this name for an
external procedure.


File: g77.info,  Node: QSqRt Intrinsic,  Next: QTan Intrinsic,  Prev: QSinH Intrinsic,  Up: Other Intrinsics

QSqRt Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSqRt' to use this name for an
external procedure.


File: g77.info,  Node: QTan Intrinsic,  Next: QTanD Intrinsic,  Prev: QSqRt Intrinsic,  Up: Other Intrinsics

QTan Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTan' to use this name for an
external procedure.


File: g77.info,  Node: QTanD Intrinsic,  Next: QTanH Intrinsic,  Prev: QTan Intrinsic,  Up: Other Intrinsics

QTanD Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTanD' to use this name for an
external procedure.


File: g77.info,  Node: QTanH Intrinsic,  Next: Rename Intrinsic (function),  Prev: QTanD Intrinsic,  Up: Other Intrinsics

QTanH Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTanH' to use this name for an
external procedure.


File: g77.info,  Node: Rename Intrinsic (function),  Next: Secnds Intrinsic,  Prev: QTanH Intrinsic,  Up: Other Intrinsics

Rename Intrinsic (function)
...........................

     Rename(PATH1, PATH2)

Rename: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Renames the file PATH1 to PATH2.  A null character (`CHAR(0)') marks
the end of the names in PATH1 and PATH2--otherwise, trailing blanks in
PATH1 and PATH2 are ignored.  See `rename(2)'.  Returns 0 on success or
a non-zero error code.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Rename
Intrinsic (subroutine)::.


File: g77.info,  Node: Secnds Intrinsic,  Next: Signal Intrinsic (function),  Prev: Rename Intrinsic (function),  Up: Other Intrinsics

Secnds Intrinsic
................

     Secnds(T)

Secnds: `REAL(KIND=1)' function.

T: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: `vxt'.

Description:

   Returns the local time in seconds since midnight minus the value T.


File: g77.info,  Node: Signal Intrinsic (function),  Next: SinD Intrinsic,  Prev: Secnds Intrinsic,  Up: Other Intrinsics

Signal Intrinsic (function)
...........................

     Signal(NUMBER, HANDLER)

Signal: `INTEGER(KIND=7)' function.

NUMBER: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

Intrinsic groups: `badu77'.

Description:

   If HANDLER is a an `EXTERNAL' routine, arranges for it to be invoked
with a single integer argument (of system-dependent length) when signal
NUMBER occurs.  If HANDLER is an integer, it can be used to turn off
handling of signal NUMBER or revert to its default action.  See
`signal(2)'.

   Note that HANDLER will be called using C conventions, so the value
of its argument in Fortran terms is obtained by applying `%LOC()' (or
LOC()) to it.

   The value returned by `signal(2)' is returned.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   *Warning:* If the returned value is stored in an `INTEGER(KIND=1)'
(default `INTEGER') argument, truncation of the original return value
occurs on some systems (such as Alphas, which have 64-bit pointers but
32-bit default integers), with no warning issued by `g77' under normal
circumstances.

   Therefore, the following code fragment might silently fail on some
systems:

     INTEGER RTN
     EXTERNAL MYHNDL
     RTN = SIGNAL(SIGNUM, MYHNDL)
     ...
     ! Restore original handler:
     RTN = SIGNAL(SIGNUM, RTN)

   The reason for the failure is that `RTN' might not hold all the
information on the original handler for the signal, thus restoring an
invalid handler.  This bug could manifest itself as a spurious run-time
failure at an arbitrary point later during the program's execution, for
example.

   *Warning:* Use of the `libf2c' run-time library function `signal_'
directly (such as via `EXTERNAL SIGNAL') requires use of the `%VAL()'
construct to pass an `INTEGER' value (such as `SIG_IGN' or `SIG_DFL')
for the HANDLER argument.

   However, while `RTN = SIGNAL(SIGNUM, %VAL(SIG_IGN))' works when
`SIGNAL' is treated as an external procedure (and resolves, at link
time, to `libf2c''s `signal_' routine), this construct is not valid
when `SIGNAL' is recognized as the intrinsic of that name.

   Therefore, for maximum portability and reliability, code such
references to the `SIGNAL' facility as follows:

     INTRINSIC SIGNAL
     ...
     RTN = SIGNAL(SIGNUM, SIG_IGN)

   `g77' will compile such a call correctly, while other compilers will
generally either do so as well or reject the `INTRINSIC SIGNAL'
statement via a diagnostic, allowing you to take appropriate action.

   For information on other intrinsics with the same name: *Note Signal
Intrinsic (subroutine)::.


File: g77.info,  Node: SinD Intrinsic,  Next: SnglQ Intrinsic,  Prev: Signal Intrinsic (function),  Up: Other Intrinsics

SinD Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL SinD' to use this name for an
external procedure.


File: g77.info,  Node: SnglQ Intrinsic,  Next: SymLnk Intrinsic (function),  Prev: SinD Intrinsic,  Up: Other Intrinsics

SnglQ Intrinsic
...............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL SnglQ' to use this name for an
external procedure.


File: g77.info,  Node: SymLnk Intrinsic (function),  Next: System Intrinsic (function),  Prev: SnglQ Intrinsic,  Up: Other Intrinsics

SymLnk Intrinsic (function)
...........................

     SymLnk(PATH1, PATH2)

SymLnk: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Makes a symbolic link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  Returns 0 on success
or a non-zero error code (`ENOSYS' if the system does not provide
`symlink(2)').

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note SymLnk
Intrinsic (subroutine)::.


File: g77.info,  Node: System Intrinsic (function),  Next: TanD Intrinsic,  Prev: SymLnk Intrinsic (function),  Up: Other Intrinsics

System Intrinsic (function)
...........................

     System(COMMAND)

System: `INTEGER(KIND=1)' function.

COMMAND: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Passes the command COMMAND to a shell (see `system(3)').  Returns
the value returned by `system(3)', presumably 0 if the shell command
succeeded.  Note that which shell is used to invoke the command is
system-dependent and environment-dependent.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.  However, the function form can be valid in
cases where the actual side effects performed by the call are
unimportant to the application.

   For example, on a UNIX system, `SAME = SYSTEM('cmp a b')' does not
perform any side effects likely to be important to the program, so the
programmer would not care if the actual system call (and invocation of
`cmp') was optimized away in a situation where the return value could
be determined otherwise, or was not actually needed (`SAME' not
actually referenced after the sample assignment statement).

   For information on other intrinsics with the same name: *Note System
Intrinsic (subroutine)::.


File: g77.info,  Node: TanD Intrinsic,  Next: Time Intrinsic (VXT),  Prev: System Intrinsic (function),  Up: Other Intrinsics

TanD Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL TanD' to use this name for an
external procedure.


File: g77.info,  Node: Time Intrinsic (VXT),  Next: UMask Intrinsic (function),  Prev: TanD Intrinsic,  Up: Other Intrinsics

Time Intrinsic (VXT)
....................

     CALL Time(TIME)

TIME: `CHARACTER*8'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns in TIME a character representation of the current time as
obtained from `ctime(3)'.

   *Note Fdate Intrinsic (subroutine):: for an equivalent routine.

   For information on other intrinsics with the same name: *Note Time
Intrinsic (UNIX)::.


File: g77.info,  Node: UMask Intrinsic (function),  Next: Unlink Intrinsic (function),  Prev: Time Intrinsic (VXT),  Up: Other Intrinsics

UMask Intrinsic (function)
..........................

     UMask(MASK)

UMask: `INTEGER(KIND=1)' function.

MASK: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sets the file creation mask to MASK and returns the old value.  See
`umask(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note UMask
Intrinsic (subroutine)::.


File: g77.info,  Node: Unlink Intrinsic (function),  Next: ZExt Intrinsic,  Prev: UMask Intrinsic (function),  Up: Other Intrinsics

Unlink Intrinsic (function)
...........................

     Unlink(FILE)

Unlink: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Unlink the file FILE.  A null character (`CHAR(0)') marks the end of
the name in FILE--otherwise, trailing blanks in FILE are ignored.
Returns 0 on success or a non-zero error code.  See `unlink(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Unlink
Intrinsic (subroutine)::.


File: g77.info,  Node: ZExt Intrinsic,  Prev: Unlink Intrinsic (function),  Up: Other Intrinsics

ZExt Intrinsic
..............

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ZExt' to use this name for an
external procedure.


File: g77.info,  Node: Other Compilers,  Next: Other Languages,  Prev: Other Dialects,  Up: Top

Other Compilers
***************

   An individual Fortran source file can be compiled to an object
(`*.o') file instead of to the final program executable.  This allows
several portions of a program to be compiled at different times and
linked together whenever a new version of the program is needed.
However, it introduces the issue of "object compatibility" across the
various object files (and libraries, or `*.a' files) that are linked
together to produce any particular executable file.

   Object compatibility is an issue when combining, in one program,
Fortran code compiled by more than one compiler (or more than one
configuration of a compiler).  If the compilers disagree on how to
transform the names of procedures, there will normally be errors when
linking such programs.  Worse, if the compilers agree on naming, but
disagree on issues like how to pass parameters, return arguments, and
lay out `COMMON' areas, the earliest detected errors might be the
incorrect results produced by the program (and that assumes these
errors are detected, which is not always the case).

   Normally, `g77' generates code that is object-compatible with code
generated by a version of `f2c' configured (with, for example, `f2c.h'
definitions) to be generally compatible with `g77' as built by `gcc'.
(Normally, `f2c' will, by default, conform to the appropriate
configuration, but it is possible that older or perhaps even newer
versions of `f2c', or versions having certain configuration changes to
`f2c' internals, will produce object files that are incompatible with
`g77'.)

   For example, a Fortran string subroutine argument will become two
arguments on the C side: a `char *' and an `int' length.

   Much of this compatibility results from the fact that `g77' uses the
same run-time library, `libf2c', used by `f2c'.

   Other compilers might or might not generate code that is
object-compatible with `libf2c' and current `g77', and some might offer
such compatibility only when explicitly selected via a command-line
option to the compiler.

   *Note: This portion of the documentation definitely needs a lot of
work!*

* Menu:

* Dropping f2c Compatibility::  When speed is more important.
* Compilers Other Than f2c::    Interoperation with code from other compilers.


File: g77.info,  Node: Dropping f2c Compatibility,  Next: Compilers Other Than f2c,  Up: Other Compilers

Dropping `f2c' Compatibility
============================

   Specifying `-fno-f2c' allows `g77' to generate, in some cases,
faster code, by not needing to allow to the possibility of linking with
code compiled by `f2c'.

   For example, this affects how `REAL(KIND=1)', `COMPLEX(KIND=1)', and
`COMPLEX(KIND=2)' functions are called.  With `-fno-f2c', they are
compiled as returning the appropriate `gcc' type (`float', `__complex__
float', `__complex__ double', in many configurations).

   With `-ff2c' in force, they are compiled differently (with perhaps
slower run-time performance) to accommodate the restrictions inherent
in `f2c''s use of K&R C as an intermediate language--`REAL(KIND=1)'
functions return C's `double' type, while `COMPLEX' functions return
`void' and use an extra argument pointing to a place for the functions
to return their values.

   It is possible that, in some cases, leaving `-ff2c' in force might
produce faster code than using `-fno-f2c'.  Feel free to experiment,
but remember to experiment with changing the way *entire programs and
their Fortran libraries are compiled* at a time, since this sort of
experimentation affects the interface of code generated for a Fortran
source file--that is, it affects object compatibility.

   Note that `f2c' compatibility is a fairly static target to achieve,
though not necessarily perfectly so, since, like `g77', it is still
being improved.  However, specifying `-fno-f2c' causes `g77' to
generate code that will probably be incompatible with code generated by
future versions of `g77' when the same option is in force.  You should
make sure you are always able to recompile complete programs from
source code when upgrading to new versions of `g77' or `f2c',
especially when using options such as `-fno-f2c'.

   Therefore, if you are using `g77' to compile libraries and other
object files for possible future use and you don't want to require
recompilation for future use with subsequent versions of `g77', you
might want to stick with `f2c' compatibility for now, and carefully
watch for any announcements about changes to the `f2c'/`libf2c'
interface that might affect existing programs (thus requiring
recompilation).

   It is probable that a future version of `g77' will not, by default,
generate object files compatible with `f2c', and that version probably
would no longer use `libf2c'.  If you expect to depend on this
compatibility in the long term, use the options `-ff2c -ff2c-library'
when compiling all of the applicable code.  This should cause future
versions of `g77' either to produce compatible code (at the expense of
the availability of some features and performance), or at the very
least, to produce diagnostics.


File: g77.info,  Node: Compilers Other Than f2c,  Prev: Dropping f2c Compatibility,  Up: Other Compilers

Compilers Other Than `f2c'
==========================

   On systems with Fortran compilers other than `f2c' and `g77', code
compiled by `g77' is not expected to work well with code compiled by
the native compiler.  (This is true for `f2c'-compiled objects as
well.)  Libraries compiled with the native compiler probably will have
to be recompiled with `g77' to be used with `g77'-compiled code.

   Reasons for such incompatibilities include:

   * There might be differences in the way names of Fortran procedures
     are translated for use in the system's object-file format.  For
     example, the statement `CALL FOO' might be compiled by `g77' to
     call a procedure the linker `ld' sees given the name `_foo_',
     while the apparently corresponding statement `SUBROUTINE FOO'
     might be compiled by the native compiler to define the
     linker-visible name `_foo', or `_FOO_', and so on.

   * There might be subtle type mismatches which cause subroutine
     arguments and function return values to get corrupted.

     This is why simply getting `g77' to transform procedure names the
     same way a native compiler does is not usually a good idea--unless
     some effort has been made to ensure that, aside from the way the
     two compilers transform procedure names, everything else about the
     way they generate code for procedure interfaces is identical.

   * Native compilers use libraries of private I/O routines which will
     not be available at link time unless you have the native
     compiler--and you would have to explicitly ask for them.

     For example, on the Sun you would have to add `-L/usr/lang/SCx.x
     -lF77 -lV77' to the link command.


File: g77.info,  Node: Other Languages,  Next: Installation,  Prev: Other Compilers,  Up: Top

Other Languages
***************

   *Note: This portion of the documentation definitely needs a lot of
work!*

* Menu:

* Interoperating with C and C++::


File: g77.info,  Node: Interoperating with C and C++,  Up: Other Languages

Tools and advice for interoperating with C and C++
==================================================

   The following discussion assumes that you are running `g77' in `f2c'
compatibility mode, i.e. not using `-fno-f2c'.  It provides some advice
about quick and simple techniques for linking Fortran and C (or C++),
the most common requirement.  For the full story consult the
description of code generation.  *Note Debugging and Interfacing::.

   When linking Fortran and C, it's usually best to use `g77' to do the
linking so that the correct libraries are included (including the maths
one).  If you're linking with C++ you will want to add `-lstdc++',
`-lg++' or whatever.  If you need to use another driver program (or
`ld' directly), you can find out what linkage options `g77' passes by
running `g77 -v'.

* Menu:

* C Interfacing Tools::
* C Access to Type Information::
* f2c Skeletons and Prototypes::
* C++ Considerations::
* Startup Code::


File: g77.info,  Node: C Interfacing Tools,  Next: C Access to Type Information,  Up: Interoperating with C and C++

C Interfacing Tools
-------------------

   Even if you don't actually use it as a compiler, `f2c' from
`ftp://ftp.netlib.org/f2c/src', can be a useful tool when you're
interfacing (linking) Fortran and C.  *Note Generating Skeletons and
Prototypes with `f2c': f2c Skeletons and Prototypes.

   To use `f2c' for this purpose you only need retrieve and build the
`src' directory from the distribution, consult the `README'
instructions there for machine-specifics, and install the `f2c' program
on your path.

   Something else that might be useful is `cfortran.h' from
`ftp://zebra/desy.de/cfortran'.  This is a fairly general tool which
can be used to generate interfaces for calling in both directions
between Fortran and C.  It can be used in `f2c' mode with
`g77'--consult its documentation for details.


File: g77.info,  Node: C Access to Type Information,  Next: f2c Skeletons and Prototypes,  Prev: C Interfacing Tools,  Up: Interoperating with C and C++

Accessing Type Information in C
-------------------------------

   Generally, C code written to link with `g77' code--calling and/or
being called from Fortran--should `#include <f2c.h>' to define the C
versions of the Fortran types.  Don't assume Fortran `INTEGER' types
correspond to C `int's, for instance; instead, declare them as
`integer', a type defined by `f2c.h'.  `f2c.h' is installed where `gcc'
will find it by default, assuming you use a copy of `gcc' compatible
with `g77', probably built at the same time as `g77'.


File: g77.info,  Node: f2c Skeletons and Prototypes,  Next: C++ Considerations,  Prev: C Access to Type Information,  Up: Interoperating with C and C++

Generating Skeletons and Prototypes with `f2c'
----------------------------------------------

   A simple and foolproof way to write `g77'-callable C routines--e.g.
to interface with an existing library--is to write a file (named, for
example, `fred.f') of dummy Fortran skeletons comprising just the
declaration of the routine(s) and dummy arguments plus `END' statements.
Then run `f2c' on file `fred.f' to produce `fred.c' into which you can
edit useful code, confident the calling sequence is correct, at least.
(There are some errors otherwise commonly made in generating C
interfaces with f2c conventions, such as not using `doublereal' as the
return type of a `REAL' `FUNCTION'.)

   `f2c' also can help with calling Fortran from C, using its `-P'
option to generate C prototypes appropriate for calling the Fortran.(1)
If the Fortran code containing any routines to be called from C is in
file `joe.f', use the command `f2c -P joe.f' to generate the file
`joe.P' containing prototype information.  `#include' this in the C
which has to call the Fortran routines to make sure you get it right.

   *Note Arrays (DIMENSION: Arrays, for information on the differences
between the way Fortran (including compilers like `g77') and C handle
arrays.

   ---------- Footnotes ----------

   (1) The files generated like this can also be used for inter-unit
consistency checking of dummy and actual arguments, although the
`ftnchek' tool from `ftp://ftp.netlib.org/fortran' or
`ftp://ftp.dsm.fordham.edu' is probably better for this purpose.


File: g77.info,  Node: C++ Considerations,  Next: Startup Code,  Prev: f2c Skeletons and Prototypes,  Up: Interoperating with C and C++

C++ Considerations
------------------

   `f2c' can be used to generate suitable code for compilation with a
C++ system using the `-C++' option.  The important thing about linking
`g77'-compiled code with C++ is that the prototypes for the `g77'
routines must specify C linkage to avoid name mangling.  So, use an
`extern "C"' declaration.  `f2c''s `-C++' option will take care of this
when generating skeletons or prototype files as above, and also avoid
clashes with C++ reserved words in addition to those in C.


File: g77.info,  Node: Startup Code,  Prev: C++ Considerations,  Up: Interoperating with C and C++

Startup Code
------------

   Unlike with some runtime systems, it shouldn't be necessary (unless
there are bugs) to use a Fortran main program to ensure the
runtime--specifically the i/o system--is initialized.  However, to use
the `g77' intrinsics `GETARG()' and `IARGC()' the `main()' routine from
the `libf2c' library must be used, either explicitly or implicitly by
using a Fortran main program.  This `main()' program calls `MAIN__()'
(where the names are C-type `extern' names, i.e. not mangled).  You
need to provide this nullary procedure as the entry point for your C
code if using `libf2c''s `main'.  In some cases it might be necessary to
provide a dummy version of this to avoid linkers complaining about
failure to resolve `MAIN__()' if linking against `libf2c' and not using
`main()' from it.


File: g77.info,  Node: Installation,  Next: Debugging and Interfacing,  Prev: Other Languages,  Up: Top

Installing GNU Fortran
**********************

   The following information describes how to install `g77'.

   The information in this file generally pertains to dealing with
*source* distributions of `g77' and `gcc'.  It is possible that some of
this information will be applicable to some *binary* distributions of
these products--however, since these distributions are not made by the
maintainers of `g77', responsibility for binary distributions rests with
whoever built and first distributed them.

   Nevertheless, efforts to make `g77' easier to both build and install
from source and package up as a binary distribution are ongoing.

* Menu:

* Prerequisites::          Make sure your system is ready for `g77'.
* Problems Installing::    Known trouble areas.
* Settings::               Changing `g77' internals before building.
* Quick Start::            The easier procedure for non-experts.
* Complete Installation::  For experts, or those who want to be: the details.
* Distributing Binaries::  If you plan on distributing your `g77'.


File: g77.info,  Node: Prerequisites,  Next: Problems Installing,  Up: Installation

Prerequisites
=============

   The procedures described to unpack, configure, build, and install
`g77' assume your system has certain programs already installed.

   The following prerequisites should be met by your system before you
follow the `g77' installation instructions:

`gzip'
     To unpack the `gcc' and `g77' distributions, you'll need the
     `gunzip' utility in the `gzip' distribution.  Most UNIX systems
     already have `gzip' installed.  If yours doesn't, you can get it
     from the FSF.

     Note that you'll need `tar' and other utilities as well, but all
     UNIX systems have these.  There are GNU versions of all these
     available--in fact, a complete GNU UNIX system can be put together
     on most systems, if desired.

     The version of GNU `gzip' used to package this release is
     1.2.4.  (The version of GNU `tar' used to package this release is
     1.12.)

`gcc-2.7.2.3.tar.gz'
     You need to have this, or some other applicable, version of `gcc'
     on your system.  The version should be an exact copy of a
     distribution from the FSF.  Its size is approximately 7.1MB.

     If you've already unpacked `gcc-2.7.2.3.tar.gz' into a directory
     (named `gcc-2.7.2.3') called the "source tree" for `gcc', you can
     delete the distribution itself, but you'll need to remember to
     skip any instructions to unpack this distribution.

     Without an applicable `gcc' source tree, you cannot build `g77'.
     You can obtain an FSF distribution of `gcc' from the FSF.

`g77-0.5.22.tar.gz'
     You probably have already unpacked this package, or you are
     reading an advance copy of these installation instructions, which
     are contained in this distribution.  The size of this package is
     approximately 1.5MB.

     You can obtain an FSF distribution of `g77' from the FSF, the same
     way you obtained `gcc'.

Enough disk space
     The amount of disk space needed to unpack, build, install, and use
     `g77' depends on the type of system you're using, how you build
     `g77', and how much of it you install (primarily, which languages
     you install).

     The sizes shown below assume all languages distributed in
     `gcc-2.7.2.3', plus `g77', will be built and installed.  These
     sizes are indicative of GNU/Linux systems on Intel x86 running
     COFF and on Digital Alpha (AXP) systems running ELF.  These should
     be fairly representative of 32-bit and 64-bit systems,
     respectively.

     Note that all sizes are approximate and subject to change without
     notice!  They are based on preliminary releases of g77 made shortly
     before the public beta release.

        -- `gcc' and `g77' distributions occupy 8.6MB packed, 35MB
          unpacked.  These consist of the source code and documentation,
          plus some derived files (mostly documentation), for `gcc' and
          `g77'.  Any deviations from these numbers for different kinds
          of systems are likely to be very minor.

        -- A "bootstrap" build requires an additional 67.3MB for a
          total of 102MB on an ix86, and an additional 98MB for a total
          of 165MB on an Alpha.

        -- Removing `gcc/stage1' after the build recovers 10.7MB for a
          total of 91MB on an ix86, and recovers ??MB for a total of
          ??MB on an Alpha.

          After doing this, the integrity of the build can still be
          verified via `make compare', and the `gcc' compiler modified
          and used to build itself for testing fairly quickly, using
          the copy of the compiler kept in `gcc/stage2'.

        -- Removing `gcc/stage2' after the build further recovers
          27.3MB for a total of 64.3MB, and recovers ??MB for a total
          of ??MB on an Alpha.

          After doing this, the compiler can still be installed,
          especially if GNU `make' is used to avoid gratuitous rebuilds
          (or, the installation can be done by hand).

        -- Installing `gcc' and `g77' copies 14.9MB onto the `--prefix'
          disk for a total of 79.2MB on an ix86, and copies ??MB onto
          the `--prefix' disk for a total of ??MB on an Alpha.

     After installation, if no further modifications and builds of
     `gcc' or `g77' are planned, the source and build directory may be
     removed, leaving the total impact on a system's disk storage as
     that of the amount copied during installation.

     Systems with the appropriate version of `gcc' installed don't
     require the complete bootstrap build.  Doing a "straight build"
     requires about as much space as does a bootstrap build followed by
     removing both the `gcc/stage1' and `gcc/stage2' directories.

     Installing `gcc' and `g77' over existing versions might require
     less *new* disk space, but note that, unlike many products, `gcc'
     installs itself in a way that avoids overwriting other installed
     versions of itself, so that other versions may easily be invoked
     (via `gcc -V VERSION').

     So, the amount of space saved as a result of having an existing
     version of `gcc' and `g77' already installed is not
     much--typically only the command drivers (`gcc', `g77', `g++', and
     so on, which are small) and the documentation is overwritten by
     the new installation.  The rest of the new installation is done
     without replacing existing installed versions (assuming they have
     different version numbers).

`patch'
     Although you can do everything `patch' does yourself, by hand,
     without much trouble, having `patch' installed makes installation
     of new versions of GNU utilities such as `g77' so much easier that
     it is worth getting.  You can obtain `patch' the same way you
     obtained `gcc' and `g77'.

     In any case, you can apply patches by hand--patch files are
     designed for humans to read them.

     The version of GNU `patch' used to develop this release is
     2.5.

`make'
     Your system must have `make', and you will probably save yourself
     a lot of trouble if it is GNU `make' (sometimes referred to as
     `gmake').

     The version of GNU `make' used to develop this release is
     3.76.1.

`cc'
     Your system must have a working C compiler.

     *Note Installing GNU CC: (gcc)Installation, for more information
     on prerequisites for installing `gcc'.

`bison'
     If you do not have `bison' installed, you can usually work around
     any need for it, since `g77' itself does not use it, and `gcc'
     normally includes all files generated by running it in its
     distribution.  You can obtain `bison' the same way you obtained
     `gcc' and `g77'.

     The version of GNU `bison' used to develop this release is
     1.25.

     *Note Missing bison?::, for information on how to work around not
     having `bison'.

`makeinfo'
     If you are missing `makeinfo', you can usually work around any
     need for it.  You can obtain `makeinfo' the same way you obtained
     `gcc' and `g77'.

     The version of GNU `makeinfo' used to develop this release is
     1.68, from GNU `texinfo' version 3.11.

     *Note Missing makeinfo?::, for information on getting around the
     lack of `makeinfo'.

`sed'
     All UNIX systems have `sed', but some have a broken version that
     cannot handle configuring, building, or installing `gcc' or `g77'.

     The version of GNU `sed' used to develop this release is
     2.05.  (Note that GNU `sed' version 3.0 was withdrawn by the
     FSF--if you happen to have this version installed, replace it with
     version 2.05 immediately.  See a GNU distribution site for further
     explanation.)

`root' access or equivalent
     To perform the complete installation procedures on a system, you
     need to have `root' access to that system, or equivalent access to
     the `--prefix' directory tree specified on the `configure' command
     line.

     Portions of the procedure (such as configuring and building `g77')
     can be performed by any user with enough disk space and virtual
     memory.

     However, these instructions are oriented towards less-experienced
     users who want to install `g77' on their own personal systems.

     System administrators with more experience will want to determine
     for themselves how they want to modify the procedures described
     below to suit the needs of their installation.


File: g77.info,  Node: Problems Installing,  Next: Settings,  Prev: Prerequisites,  Up: Installation

Problems Installing
===================

   This is a list of problems (and some apparent problems which don't
really mean anything is wrong) that show up when configuring, building,
installing, or porting GNU Fortran.

   *Note Installation Problems: (gcc)Installation Problems, for more
information on installation problems that can afflict either `gcc' or
`g77'.

* Menu:

* General Problems::         Problems afflicting most or all systems.
* System-specific Problems:: Problems afflicting particular systems.
* Cross-compiler Problems::  Problems afflicting cross-compilation setups.


File: g77.info,  Node: General Problems,  Next: System-specific Problems,  Up: Problems Installing

General Problems
----------------

   These problems can occur on most or all systems.

* Menu:

* GNU C Required::             Why even ANSI C is not enough.
* Patching GNU CC Necessary::  Why `gcc' must be patched first.
* Building GNU CC Necessary::  Why you can't build *just* Fortran.
* Missing strtoul::            If linking `f771' fails due to an
                                unresolved reference to `strtoul'.
* Object File Differences::    It's okay that `make compare' will
                                flag `f/zzz.o'.
* Cleanup Kills Stage Directories::  A minor nit for `g77' developers.
* Missing gperf?::             When building requires `gperf'.


File: g77.info,  Node: GNU C Required,  Next: Patching GNU CC Necessary,  Up: General Problems

GNU C Required
..............

   Compiling `g77' requires GNU C, not just ANSI C.  Fixing this
wouldn't be very hard (just tedious), but the code using GNU extensions
to the C language is expected to be rewritten for 0.6 anyway, so there
are no plans for an interim fix.

   This requirement does not mean you must already have `gcc' installed
to build `g77'.  As long as you have a working C compiler, you can use a
bootstrap build to automate the process of first building `gcc' using
the working C compiler you have, then building `g77' and rebuilding
`gcc' using that just-built `gcc', and so on.


File: g77.info,  Node: Patching GNU CC Necessary,  Next: Building GNU CC Necessary,  Prev: GNU C Required,  Up: General Problems

Patching GNU CC Necessary
.........................

   `g77' currently requires application of a patch file to the gcc
compiler tree.  The necessary patches should be folded in to the
mainline gcc distribution.

   Some combinations of versions of `g77' and `gcc' might actually
*require* no patches, but the patch files will be provided anyway as
long as there are more changes expected in subsequent releases.  These
patch files might contain unnecessary, but possibly helpful, patches.
As a result, it is possible this issue might never be resolved, except
by eliminating the need for the person configuring `g77' to apply a
patch by hand, by going to a more automated approach (such as
configure-time patching).


File: g77.info,  Node: Building GNU CC Necessary,  Next: Missing strtoul,  Prev: Patching GNU CC Necessary,  Up: General Problems

Building GNU CC Necessary
.........................

   It should be possible to build the runtime without building `cc1'
and other non-Fortran items, but, for now, an easy way to do that is
not yet established.


File: g77.info,  Node: Missing strtoul,  Next: Object File Differences,  Prev: Building GNU CC Necessary,  Up: General Problems

Missing strtoul
...............

   On SunOS4 systems, linking the `f771' program produces an error
message concerning an undefined symbol named `_strtoul'.

   This is not a `g77' bug.  *Note Patching GNU Fortran::, for
information on a workaround provided by `g77'.

   The proper fix is either to upgrade your system to one that provides
a complete ANSI C environment, or improve `gcc' so that it provides one
for all the languages and configurations it supports.

   *Note:* In earlier versions of `g77', an automated workaround for
this problem was attempted.  It worked for systems without `_strtoul',
substituting the incomplete-yet-sufficient version supplied with `g77'
for those systems.  However, the automated workaround failed
mysteriously for systems that appeared to have conforming ANSI C
environments, and it was decided that, lacking resources to more fully
investigate the problem, it was better to not punish users of those
systems either by requiring them to work around the problem by hand or
by always substituting an incomplete `strtoul()' implementation when
their systems had a complete, working one.  Unfortunately, this meant
inconveniencing users of systems not having `strtoul()', but they're
using obsolete (and generally unsupported) systems anyway.


File: g77.info,  Node: Object File Differences,  Next: Cleanup Kills Stage Directories,  Prev: Missing strtoul,  Up: General Problems

Object File Differences
.......................

   A comparison of object files after building Stage 3 during a
bootstrap build will result in `gcc/f/zzz.o' being flagged as different
from the Stage 2 version.  That is because it contains a string with an
expansion of the `__TIME__' macro, which expands to the current time of
day.  It is nothing to worry about, since `gcc/f/zzz.c' doesn't contain
any actual code.  It does allow you to override its use of `__DATE__'
and `__TIME__' by defining macros for the compilation--see the source
code for details.


File: g77.info,  Node: Cleanup Kills Stage Directories,  Next: Missing gperf?,  Prev: Object File Differences,  Up: General Problems

Cleanup Kills Stage Directories
...............................

   It'd be helpful if `g77''s `Makefile.in' or `Make-lang.in' would
create the various `stageN' directories and their subdirectories, so
developers and expert installers wouldn't have to reconfigure after
cleaning up.


File: g77.info,  Node: Missing gperf?,  Prev: Cleanup Kills Stage Directories,  Up: General Problems

Missing `gperf'?
................

   If a build aborts trying to invoke `gperf', that strongly suggests
an improper method was used to create the `gcc' source directory, such
as the UNIX `cp -r' command instead of `cp -pr', since this problem
very likely indicates that the date-time-modified information on the
`gcc' source files is incorrect.

   The proper solution is to recreate the `gcc' source directory from a
`gcc' distribution known to be provided by the FSF.

   It is possible you might be able to temporarily work around the
problem, however, by trying these commands:

     sh# cd gcc
     sh# touch c-gperf.h
     sh#

   These commands update the date-time-modified information for the
file produced by the invocation of `gperf' in the current versions of
`gcc', so that `make' no longer believes it needs to update it.  This
file should already exist in a `gcc' distribution, but mistakes made
when copying the `gcc' directory can leave the modification information
set such that the `gperf' input files look more "recent" than the
corresponding output files.

   If the above does not work, definitely start from scratch and avoid
copying the `gcc' using any method that does not reliably preserve
date-time-modified information, such as the UNIX `cp -r' command (use
`cp -pr' instead).


File: g77.info,  Node: System-specific Problems,  Next: Cross-compiler Problems,  Prev: General Problems,  Up: Problems Installing

System-specific Problems
------------------------

   If your system is based on a Digital Alpha (AXP) architecture and
employs a 64-bit operating system (such as GNU/Linux), you might
consider using `egcs' instead of versions of `g77' based on versions of
`gcc' prior to 2.8.  `http://www.cygnus.com/egcs' for information on
`egcs', or obtain a copy from `ftp://egcs.cygnus.com/pub/egcs'.

   If your system is Irix 6, to obtain a working version of `gcc',
`http://reality.sgi.com/knobi/gcc-2.7.2.x-on-irix-6.2-6.3'.


File: g77.info,  Node: Cross-compiler Problems,  Prev: System-specific Problems,  Up: Problems Installing

Cross-compiler Problems
-----------------------

   `g77' has been in alpha testing since September of 1992, and in
public beta testing since February of 1995.  Alpha testing was done by
a small number of people worldwide on a fairly wide variety of
machines, involving self-compilation in most or all cases.  Beta
testing has been done primarily via self-compilation, but in more and
more cases, cross-compilation (and "criss-cross compilation", where a
version of a compiler is built on one machine to run on a second and
generate code that runs on a third) has been tried and has succeeded,
to varying extents.

   Generally, `g77' can be ported to any configuration to which `gcc',
`f2c', and `libf2c' can be ported and made to work together, aside from
the known problems described in this manual.  If you want to port `g77'
to a particular configuration, you should first make sure `gcc' and
`libf2c' can be ported to that configuration before focusing on `g77',
because `g77' is so dependent on them.

   Even for cases where `gcc' and `libf2c' work, you might run into
problems with cross-compilation on certain machines, for several
reasons.

   * There is one known bug (a design bug to be fixed in 0.6) that
     prevents configuration of `g77' as a cross-compiler in some cases,
     though there are assumptions made during configuration that
     probably make doing non-self-hosting builds a hassle, requiring
     manual intervention.

   * `gcc' might still have some trouble being configured for certain
     combinations of machines.  For example, it might not know how to
     handle floating-point constants.

   * Improvements to the way `libf2c' is built could make building
     `g77' as a cross-compiler easier--for example, passing and using
     `$(LD)' and `$(AR)' in the appropriate ways.

   * There are still some challenges putting together the right
     run-time libraries (needed by `libf2c') for a target system,
     depending on the systems involved in the configuration.  (This is
     a general problem with cross-compilation, and with `gcc' in
     particular.)


File: g77.info,  Node: Settings,  Next: Quick Start,  Prev: Problems Installing,  Up: Installation

Changing Settings Before Building
=================================

   Here are some internal `g77' settings that can be changed by editing
source files in `gcc/f/' before building.

   This information, and perhaps even these settings, represent
stop-gap solutions to problems people doing various ports of `g77' have
encountered.  As such, none of the following information is expected to
be pertinent in future versions of `g77'.

* Menu:

* Larger File Unit Numbers::     Raising `MXUNIT'.
* Always Flush Output::          Synchronizing write errors.
* Maximum Stackable Size::       Large arrays forced off the stack.
* Floating-point Bit Patterns::  Possible programs building `g77'
                                   as a cross-compiler.
* Large Initialization::         Large arrays with `DATA'
                                   initialization.
* Alpha Problems Fixed::         Problems with 64-bit systems like
                                   Alphas now fixed?


File: g77.info,  Node: Larger File Unit Numbers,  Next: Always Flush Output,  Up: Settings

Larger File Unit Numbers
------------------------

   As distributed, whether as part of `f2c' or `g77', `libf2c' accepts
file unit numbers only in the range 0 through 99.  For example, a
statement such as `WRITE (UNIT=100)' causes a run-time crash in
`libf2c', because the unit number, 100, is out of range.

   If you know that Fortran programs at your installation require the
use of unit numbers higher than 99, you can change the value of the
`MXUNIT' macro, which represents the maximum unit number, to an
appropriately higher value.

   To do this, edit the file `f/runtime/libI77/fio.h' in your `g77'
source tree, changing the following line:

     #define MXUNIT 100

   Change the line so that the value of `MXUNIT' is defined to be at
least one *greater* than the maximum unit number used by the Fortran
programs on your system.

   (For example, a program that does `WRITE (UNIT=255)' would require
`MXUNIT' set to at least 256 to avoid crashing.)

   Then build or rebuild `g77' as appropriate.

   *Note:* Changing this macro has *no* effect on other limits your
system might place on the number of files open at the same time.  That
is, the macro might allow a program to do `WRITE (UNIT=100)', but the
library and operating system underlying `libf2c' might disallow it if
many other files have already been opened (via `OPEN' or implicitly via
`READ', `WRITE', and so on).  Information on how to increase these
other limits should be found in your system's documentation.


File: g77.info,  Node: Always Flush Output,  Next: Maximum Stackable Size,  Prev: Larger File Unit Numbers,  Up: Settings

Always Flush Output
-------------------

   Some Fortran programs require output (writes) to be flushed to the
operating system (under UNIX, via the `fflush()' library call) so that
errors, such as disk full, are immediately flagged via the relevant
`ERR=' and `IOSTAT=' mechanism, instead of such errors being flagged
later as subsequent writes occur, forcing the previously written data
to disk, or when the file is closed.

   Essentially, the difference can be viewed as synchronous error
reporting (immediate flagging of errors during writes) versus
asynchronous, or, more precisely, buffered error reporting (detection
of errors might be delayed).

   `libf2c' supports flagging write errors immediately when it is built
with the `ALWAYS_FLUSH' macro defined.  This results in a `libf2c' that
runs slower, sometimes quite a bit slower, under certain
circumstances--for example, accessing files via the networked file
system NFS--but the effect can be more reliable, robust file I/O.

   If you know that Fortran programs requiring this level of precision
of error reporting are to be compiled using the version of `g77' you
are building, you might wish to modify the `g77' source tree so that
the version of `libf2c' is built with the `ALWAYS_FLUSH' macro defined,
enabling this behavior.

   To do this, find this line in `f/runtime/configure.in' in your `g77'
source tree:

     dnl AC_DEFINE(ALWAYS_FLUSH)

   Remove the leading `dnl ', so the line begins with `AC_DEFINE(', and
run `autoconf' in that file's directory.  (Or, if you don't have
`autoconf', you can modify `f2c.h.in' in the same directory to include
the line `#define ALWAYS_FLUSH' after `#define F2C_INCLUDE'.)

   Then build or rebuild `g77' as appropriate.


File: g77.info,  Node: Maximum Stackable Size,  Next: Floating-point Bit Patterns,  Prev: Always Flush Output,  Up: Settings

Maximum Stackable Size
----------------------

   `g77', on most machines, puts many variables and arrays on the stack
where possible, and can be configured (by changing
`FFECOM_sizeMAXSTACKITEM' in `gcc/f/com.c') to force smaller-sized
entities into static storage (saving on stack space) or permit
larger-sized entities to be put on the stack (which can improve
run-time performance, as it presents more opportunities for the GBE to
optimize the generated code).

   *Note:* Putting more variables and arrays on the stack might cause
problems due to system-dependent limits on stack size.  Also, the value
of `FFECOM_sizeMAXSTACKITEM' has no effect on automatic variables and
arrays.  *Note But-bugs::, for more information.


File: g77.info,  Node: Floating-point Bit Patterns,  Next: Large Initialization,  Prev: Maximum Stackable Size,  Up: Settings

Floating-point Bit Patterns
---------------------------

   The `g77' build will crash if an attempt is made to build it as a
cross-compiler for a target when `g77' cannot reliably determine the
bit pattern of floating-point constants for the target.  Planned
improvements for version 0.6 of `g77' will give it the capabilities it
needs to not have to crash the build but rather generate correct code
for the target.  (Currently, `g77' would generate bad code under such
circumstances if it didn't crash during the build, e.g. when compiling
a source file that does something like `EQUIVALENCE (I,R)' and `DATA
R/9.43578/'.)


File: g77.info,  Node: Large Initialization,  Next: Alpha Problems Fixed,  Prev: Floating-point Bit Patterns,  Up: Settings

Initialization of Large Aggregate Areas
---------------------------------------

   A warning message is issued when `g77' sees code that provides
initial values (e.g. via `DATA') to an aggregate area (`COMMON' or
`EQUIVALENCE', or even a large enough array or `CHARACTER' variable)
that is large enough to increase `g77''s compile time by roughly a
factor of 10.

   This size currently is quite small, since `g77' currently has a
known bug requiring too much memory and time to handle such cases.  In
`gcc/f/data.c', the macro `FFEDATA_sizeTOO_BIG_INIT_' is defined to the
minimum size for the warning to appear.  The size is specified in
storage units, which can be bytes, words, or whatever, on a
case-by-case basis.

   After changing this macro definition, you must (of course) rebuild
and reinstall `g77' for the change to take effect.

   Note that, as of version 0.5.18, improvements have reduced the scope
of the problem for *sparse* initialization of large arrays, especially
those with large, contiguous uninitialized areas.  However, the warning
is issued at a point prior to when `g77' knows whether the
initialization is sparse, and delaying the warning could mean it is
produced too late to be helpful.

   Therefore, the macro definition should not be adjusted to reflect
sparse cases.  Instead, adjust it to generate the warning when densely
initialized arrays begin to cause responses noticeably slower than
linear performance would suggest.


File: g77.info,  Node: Alpha Problems Fixed,  Prev: Large Initialization,  Up: Settings

Alpha Problems Fixed
--------------------

   `g77' used to warn when it was used to compile Fortran code for a
target configuration that is not basically a 32-bit machine (such as an
Alpha, which is a 64-bit machine, especially if it has a 64-bit
operating system running on it).  That was because `g77' was known to
not work properly on such configurations.

   As of version 0.5.20, `g77' is believed to work well enough on such
systems.  So, the warning is no longer needed or provided.

   However, support for 64-bit systems, especially in areas such as
cross-compilation and handling of intrinsics, is still incomplete.  The
symptoms are believed to be compile-time diagnostics rather than the
generation of bad code.  It is hoped that version 0.6 will completely
support 64-bit systems.


File: g77.info,  Node: Quick Start,  Next: Complete Installation,  Prev: Settings,  Up: Installation

Quick Start
===========

   This procedure configures, builds, and installs `g77' "out of the
box" and works on most UNIX systems.  Each command is identified by a
unique number, used in the explanatory text that follows.  For the most
part, the output of each command is not shown, though indications of
the types of responses are given in a few cases.

   To perform this procedure, the installer must be logged in as user
`root'.  Much of it can be done while not logged in as `root', and
users experienced with UNIX administration should be able to modify the
procedure properly to do so.

   Following traditional UNIX conventions, it is assumed that the
source trees for `g77' and `gcc' will be placed in `/usr/src'.  It also
is assumed that the source distributions themselves already reside in
`/usr/FSF', a naming convention used by the author of `g77' on his own
system:

     /usr/FSF/gcc-2.7.2.3.tar.gz
     /usr/FSF/g77-0.5.22.tar.gz

   Users of the following systems should not blindly follow these
quick-start instructions, because of problems their systems have coping
with straightforward installation of `g77':

   * SunOS4

   Instead, see *Note Complete Installation::, for detailed information
on how to configure, build, and install `g77' for your particular
system.  Also, see *Note Known Causes of Trouble with GNU Fortran:
Trouble, for information on bugs and other problems known to afflict the
installation process, and how to report newly discovered ones.

   If your system is *not* on the above list, and *is* a UNIX system or
one of its variants, you should be able to follow the instructions
below.  If you vary *any* of the steps below, you might run into
trouble, including possibly breaking existing programs for other users
of your system.  Before doing so, it is wise to review the explanations
of some of the steps.  These explanations follow this list of steps.

     sh[ 1]# cd /usr/src
     
     sh[ 2]# gunzip -c < /usr/FSF/gcc-2.7.2.3.tar.gz | tar xf -
     [Might say "Broken pipe"...that is normal on some systems.]
     
     sh[ 3]# gunzip -c < /usr/FSF/g77-0.5.22.tar.gz | tar xf -
     ["Broken pipe" again possible.]
     
     sh[ 4]# ln -s gcc-2.7.2.3 gcc
     
     sh[ 5]# ln -s g77-0.5.22 g77
     
     sh[ 6]# mv -i g77/* gcc
     [No questions should be asked by mv here; or, you made a mistake.]
     
     sh[ 7]# patch -p1 -E -V t -d gcc < gcc/f/gbe/2.7.2.3.diff
     [Unless patch complains about rejected patches, this step worked.]
     
     sh[ 8]# cd gcc
     sh[ 9]# touch f77-install-ok
     [Do not do the above if your system already has an f77
     command, unless you've checked that overwriting it
     is okay.]
     
     sh[10]# touch f2c-install-ok
     [Do not do the above if your system already has an f2c
     command, unless you've checked that overwriting it
     is okay.  Else, touch f2c-exists-ok.]
     
     sh[11]# ./configure --prefix=/usr
     [Do not do the above if gcc is not installed in /usr/bin.
     You might need a different --prefix=..., as
     described below.]
     
     sh[12]# make bootstrap
     [This takes a long time, and is where most problems occur.]
     
     sh[13]# make compare
     [This verifies that the compiler is `sane'.  Only
     the file `f/zzz.o' (aka `tmp-foo1' and `tmp-foo2')
     should be in the list of object files this command
     prints as having different contents.  If other files
     are printed, you have likely found a g77 bug.]
     
     sh[14]# rm -fr stage1
     
     sh[15]# make -k install
     [The actual installation.]
     
     sh[16]# g77 -v
     [Verify that g77 is installed, obtain version info.]
     
     sh[17]#

   *Note Updating Your Info Directory: Updating Documentation, for
information on how to update your system's top-level `info' directory
to contain a reference to this manual, so that users of `g77' can
easily find documentation instead of having to ask you for it.

   Elaborations of many of the above steps follows:

Step 1: `cd /usr/src'
     You can build `g77' pretty much anyplace.  By convention, this
     manual assumes `/usr/src'.  It might be helpful if other users on
     your system knew where to look for the source code for the
     installed version of `g77' and `gcc' in any case.

Step 3: `gunzip -d < /usr/FSF/g77-0.5.22.tar.gz | tar xf -'
     It is not always necessary to obtain the latest version of `g77'
     as a complete `.tar.gz' file if you have a complete, earlier
     distribution of `g77'.  If appropriate, you can unpack that earlier
     version of `g77', and then apply the appropriate patches to
     achieve the same result--a source tree containing version
     0.5.22 of `g77'.

Step 4: `ln -s gcc-2.7.2.3 gcc'

Step 5: `ln -s g77-0.5.22 g77'
     These commands mainly help reduce typing, and help reduce visual
     clutter in examples in this manual showing what to type to install
     `g77'.

     *Note Unpacking::, for information on using distributions of `g77'
     made by organizations other than the FSF.

Step 6: `mv -i g77/* gcc'
     After doing this, you can, if you like, type `rm g77' and `rmdir
     g77-0.5.22' to remove the empty directory and the symbol link to
     it.  But, it might be helpful to leave them around as quick
     reminders of which version(s) of `g77' are installed on your
     system.

     *Note Unpacking::, for information on the contents of the `g77'
     directory (as merged into the `gcc' directory).

Step 7: `patch -p1 ...'
     If you are using GNU `patch' version 2.5 or later, this should
     produce a list of files patched.  (Other versions of `patch' might
     not work properly.)

     If messages about "fuzz", "offset", or especially "reject files"
     are printed, it might mean you applied the wrong patch file.  If
     you believe this is the case, it is best to restart the sequence
     after deleting (or at least renaming to unused names) the
     top-level directories for `g77' and `gcc' and their symbolic links.

     After this command finishes, the `gcc' directory might have old
     versions of several files as saved by `patch'.  To remove these,
     after `cd gcc', type `rm -i *.~*~'.

     *Note Merging Distributions::, for more information.

     *Note:* `gcc' versions circa 2.7.2.2 and 2.7.2.3 are known to have
     slightly differing versions of the `gcc/ChangeLog' file, depending
     on how they are obtained.  You can safely ignore diagnostics
     `patch' reports when patching this particular file, since it is
     purely a documentation file for implementors.  See
     `gcc/f/gbe/2.7.2.3.diff' for more information.

Step 9: `touch f77-install-ok'
     Don't do this if you don't want to overwrite an existing version
     of `f77' (such as a native compiler, or a script that invokes
     `f2c').  Otherwise, installation will overwrite the `f77' command
     and the `f77' man pages with copies of the corresponding `g77'
     material.

     *Note Installing `f77': Installing f77, for more information.

Step 10: `touch f2c-install-ok'
     Don't do this if you don't want to overwrite an existing
     installation of `libf2c' (though, chances are, you do).  Instead,
     `touch f2c-exists-ok' to allow the installation to continue
     without any error messages about `/usr/lib/libf2c.a' already
     existing.

     *Note Installing `f2c': Installing f2c, for more information.

Step 11: `./configure --prefix=/usr'
     This is where you specify that the `g77' executable is to be
     installed in `/usr/bin/', the `libf2c.a' library is to be
     installed in `/usr/lib/', and so on.

     You should ensure that any existing installation of the `gcc'
     executable is in `/usr/bin/'.  Otherwise, installing `g77' so that
     it does not fully replace the existing installation of `gcc' is
     likely to result in the inability to compile Fortran programs.

     *Note Where in the World Does Fortran (and GNU CC) Go?: Where to
     Install, for more information on determining where to install
     `g77'.  *Note Configuring gcc::, for more information on the
     configuration process triggered by invoking the `./configure'
     script.

Step 12: `make bootstrap'
     *Note Installing GNU CC: (gcc)Installation, for information on the
     kinds of diagnostics you should expect during this procedure.

     *Note Building gcc::, for complete `g77'-specific information on
     this step.

Step 13: `make compare'
     *Note Where to Port Bugs: Bug Lists, for information on where to
     report that you observed more than `f/zzz.o' having different
     contents during this phase.

     *Note How to Report Bugs: Bug Reporting, for information on *how*
     to report bugs like this.

Step 14: `rm -fr stage1'
     You don't need to do this, but it frees up disk space.

Step 15: `make -k install'
     If this doesn't seem to work, try:

          make -k install install-libf77 install-f2c-all

     *Note Installation of Binaries::, for more information.

     *Note Updating Your Info Directory: Updating Documentation, for
     information on entering this manual into your system's list of
     texinfo manuals.

Step 16: `g77 -v'
     If this command prints approximately 25 lines of output, including
     the GNU Fortran Front End version number (which should be the same
     as the version number for the version of `g77' you just built and
     installed) and the version numbers for the three parts of the
     `libf2c' library (`libF77', `libI77', `libU77'), and those version
     numbers are all in agreement, then there is a high likelihood that
     the installation has been successfully completed.

     You might consider doing further testing.  For example, log in as
     a non-privileged user, then create a small Fortran program, such
     as:

                PROGRAM SMTEST
                DO 10 I=1, 10
                   PRINT *, 'Hello World #', I
          10    CONTINUE
                END

     Compile, link, and run the above program, and, assuming you named
     the source file `smtest.f', the session should look like this:

          sh# g77 -o smtest smtest.f
          sh# ./smtest
           Hello World # 1
           Hello World # 2
           Hello World # 3
           Hello World # 4
           Hello World # 5
           Hello World # 6
           Hello World # 7
           Hello World # 8
           Hello World # 9
           Hello World # 10
          sh#

     After proper installation, you don't need to keep your gcc and g77
     source and build directories around anymore.  Removing them can
     free up a lot of disk space.


File: g77.info,  Node: Complete Installation,  Next: Distributing Binaries,  Prev: Quick Start,  Up: Installation

Complete Installation
=====================

   Here is the complete `g77'-specific information on how to configure,
build, and install `g77'.

* Menu:

* Unpacking::
* Merging Distributions::
* f77: Installing f77.
* f2c: Installing f2c.
* Patching GNU Fortran::
* Where to Install::
* Configuring gcc::
* Building gcc::
* Pre-installation Checks::
* Installation of Binaries::
* Updating Documentation::
* bison: Missing bison?.
* makeinfo: Missing makeinfo?.


File: g77.info,  Node: Unpacking,  Next: Merging Distributions,  Up: Complete Installation

Unpacking
---------

   The `gcc' source distribution is a stand-alone distribution.  It is
designed to be unpacked (producing the `gcc' source tree) and built as
is, assuming certain prerequisites are met (including the availability
of compatible UNIX programs such as `make', `cc', and so on).

   However, before building `gcc', you will want to unpack and merge
the `g77' distribution in with it, so that you build a Fortran-capable
version of `gcc', which includes the `g77' command, the necessary
run-time libraries, and this manual.

   Unlike `gcc', the `g77' source distribution is *not* a stand-alone
distribution.  It is designed to be unpacked and, afterwards,
immediately merged into an applicable `gcc' source tree.  That is, the
`g77' distribution *augments* a `gcc' distribution--without `gcc',
generally only the documentation is immediately usable.

   A sequence of commands typically used to unpack `gcc' and `g77' is:

     sh# cd /usr/src
     sh# gunzip -c /usr/FSF/gcc-2.7.2.3.tar.gz | tar xf -
     sh# gunzip -c /usr/FSF/g77-0.5.22.tar.gz | tar xf -
     sh# ln -s gcc-2.7.2.3 gcc
     sh# ln -s g77-0.5.22 g77
     sh# mv -i g77/* gcc

   *Notes:* The commands beginning with `gunzip...' might print `Broken
pipe...' as they complete.  That is nothing to worry about, unless you
actually *hear* a pipe breaking.  The `ln' commands are helpful in
reducing typing and clutter in installation examples in this manual.
Hereafter, the top level of `gcc' source tree is referred to as `gcc',
and the top level of just the `g77' source tree (prior to issuing the
`mv' command, above) is referred to as `g77'.

   There are three top-level names in a `g77' distribution:

     g77/COPYING.g77
     g77/README.g77
     g77/f

   All three entries should be moved (or copied) into a `gcc' source
tree (typically named after its version number and as it appears in the
FSF distributions--e.g. `gcc-2.7.2.3').

   `g77/f' is the subdirectory containing all of the code,
documentation, and other information that is specific to `g77'.  The
other two files exist to provide information on `g77' to someone
encountering a `gcc' source tree with `g77' already present, who has
not yet read these installation instructions and thus needs help
understanding that the source tree they are looking at does not come
from a single FSF distribution.  They also help people encountering an
unmerged `g77' source tree for the first time.

   *Note:* Please use *only* `gcc' and `g77' source trees as
distributed by the FSF.  Use of modified versions, such as the
Pentium-specific-optimization port of `gcc', is likely to result in
problems that appear to be in the `g77' code but, in fact, are not.  Do
not use such modified versions unless you understand all the
differences between them and the versions the FSF distributes--in which
case you should be able to modify the `g77' (or `gcc') source trees
appropriately so `g77' and `gcc' can coexist as they do in the stock
FSF distributions.


File: g77.info,  Node: Merging Distributions,  Next: Installing f77,  Prev: Unpacking,  Up: Complete Installation

Merging Distributions
---------------------

   After merging the `g77' source tree into the `gcc' source tree, the
final merge step is done by applying the pertinent patches the `g77'
distribution provides for the `gcc' source tree.

   Read the file `gcc/f/gbe/README', and apply the appropriate patch
file for the version of the GNU CC compiler you have, if that exists.
If the directory exists but the appropriate file does not exist, you
are using either an old, unsupported version, or a release one that is
newer than the newest `gcc' version supported by the version of `g77'
you have.

   As of version 0.5.18, `g77' modifies the version number of `gcc' via
the pertinent patches.  This is done because the resulting version of
`gcc' is deemed sufficiently different from the vanilla distribution to
make it worthwhile to present, to the user, information signaling the
fact that there are some differences.

   GNU version numbers make it easy to figure out whether a particular
version of a distribution is newer or older than some other version of
that distribution.  The format is, generally, MAJOR.MINOR.PATCH, with
each field being a decimal number.  (You can safely ignore leading
zeros; for example, 1.5.3 is the same as 1.5.03.)  The MAJOR field only
increases with time.  The other two fields are reset to 0 when the
field to their left is incremented; otherwise, they, too, only increase
with time.  So, version 2.6.2 is newer than version 2.5.8, and version
3.0 is newer than both.  (Trailing `.0' fields often are omitted in
announcements and in names for distributions and the directories they
create.)

   If your version of `gcc' is older than the oldest version supported
by `g77' (as casually determined by listing the contents of
`gcc/f/gbe/'), you should obtain a newer, supported version of `gcc'.
(You could instead obtain an older version of `g77', or try and get
your `g77' to work with the old `gcc', but neither approach is
recommended, and you shouldn't bother reporting any bugs you find if you
take either approach, because they're probably already fixed in the
newer versions you're not using.)

   If your version of `gcc' is newer than the newest version supported
by `g77', it is possible that your `g77' will work with it anyway.  If
the version number for `gcc' differs only in the PATCH field, you might
as well try applying the `g77' patch that is for the newest version of
`gcc' having the same MAJOR and MINOR fields, as this is likely to work.

   So, for example, if a particular version of `g77' has support for
`gcc' versions 2.7.0 and 2.7.1, it is likely that `gcc-2.7.2' would
work well with `g77' by using the `2.7.1.diff' patch file provided with
`g77' (aside from some offsets reported by `patch', which usually are
harmless).

   However, `gcc-2.8.0' would almost certainly not work with that
version of `g77' no matter which patch file was used, so a new version
of `g77' would be needed (and you should wait for it rather than
bothering the maintainers--*note User-Visible Changes: Changes.).

   This complexity is the result of `gcc' and `g77' being separate
distributions.  By keeping them separate, each product is able to be
independently improved and distributed to its user base more frequently.

   However, `g77' often requires changes to contemporary versions of
`gcc'.  Also, the GBE interface defined by `gcc' typically undergoes
some incompatible changes at least every time the MINOR field of the
version number is incremented, and such changes require corresponding
changes to the `g77' front end (FFE).

   It is hoped that the GBE interface, and the `gcc' and `g77' products
in general, will stabilize sufficiently for the need for hand-patching
to disappear.

   If you are using GNU `patch' version 2.5 or later, this should
produce a list of files patched.  (Other versions of `patch' might not
work properly.)

   If messages about "fuzz", "offset", or especially "reject files" are
printed, it might mean you applied the wrong patch file.  If you
believe this is the case, it is best to restart the sequence after
deleting (or at least renaming to unused names) the top-level
directories for `g77' and `gcc' and their symbolic links.  That is
because `patch' might have partially patched some `gcc' source files,
so reapplying the correct patch file might result in the correct
patches being applied incorrectly (due to the way `patch' necessarily
works).

   After `patch' finishes, the `gcc' directory might have old versions
of several files as saved by `patch'.  To remove these, after `cd gcc',
type `rm -i *.~*~'.

   *Note:* `gcc' versions circa 2.7.2.2 and 2.7.2.3 are known to have
slightly differing versions of the `gcc/ChangeLog' file, depending on
how they are obtained.  You can safely ignore diagnostics `patch'
reports when patching this particular file, since it is purely a
documentation file for implementors.  See `gcc/f/gbe/2.7.2.3.diff' for
more information.

   *Note:* `g77''s configuration file `gcc/f/config-lang.in' ensures
that the source code for the version of `gcc' being configured has at
least one indication of being patched as required specifically by `g77'.
This configuration-time checking should catch failure to apply the
correct patch and, if so caught, should abort the configuration with an
explanation.  *Please* do not try to disable the check, otherwise `g77'
might well appear to build and install correctly, and even appear to
compile correctly, but could easily produce broken code.

   `LC_ALL=C TZ=UTC0 diff -rcp2N' is used to create the patch files in
`gcc/f/gbe/'.


File: g77.info,  Node: Installing f77,  Next: Installing f2c,  Prev: Merging Distributions,  Up: Complete Installation

Installing `f77'
----------------

   You should decide whether you want installation of `g77' to also
install an `f77' command.  On systems with a native `f77', this is not
normally desired, so `g77' does not do this by default.

   If you want `f77' installed, create the file `f77-install-ok' (e.g.
via the UNIX command `touch f77-install-ok') in the source or build
top-level directory (the same directory in which the `g77' `f'
directory resides, not the `f' directory itself), or edit
`gcc/f/Make-lang.in' and change the definition of the
`F77_INSTALL_FLAG' macro appropriately.

   Usually, this means that, after typing `cd gcc', you would type
`touch f77-install-ok'.

   When you enable installation of `f77', either a link to or a direct
copy of the `g77' command is made.  Similarly, `f77.1' is installed as
a man page.

   (The `uninstall' target in the `gcc/Makefile' also tests this macro
and file, when invoked, to determine whether to delete the installed
copies of `f77' and `f77.1'.)

   *Note:* No attempt is yet made to install a program (like a shell
script) that provides compatibility with any other `f77' programs.
Only the most rudimentary invocations of `f77' will work the same way
with `g77'.


File: g77.info,  Node: Installing f2c,  Next: Patching GNU Fortran,  Prev: Installing f77,  Up: Complete Installation

Installing `f2c'
----------------

   Currently, `g77' does not include `f2c' itself in its distribution.
However, it does include a modified version of the `libf2c'.  This
version is normally compatible with `f2c', but has been modified to
meet the needs of `g77' in ways that might possibly be incompatible
with some versions or configurations of `f2c'.

   Decide how installation of `g77' should affect any existing
installation of `f2c' on your system.

   If you do not have `f2c' on your system (e.g. no `/usr/bin/f2c', no
`/usr/include/f2c.h', and no `/usr/lib/libf2c.a', `/usr/lib/libF77.a',
or `/usr/lib/libI77.a'), you don't need to be concerned with this item.

   If you do have `f2c' on your system, you need to decide how users of
`f2c' will be affected by your installing `g77'.  Since `g77' is
currently designed to be object-code-compatible with `f2c' (with very
few, clear exceptions), users of `f2c' might want to combine
`f2c'-compiled object files with `g77'-compiled object files in a
single executable.

   To do this, users of `f2c' should use the same copies of `f2c.h' and
`libf2c.a' that `g77' uses (and that get built as part of `g77').

   If you do nothing here, the `g77' installation process will not
overwrite the `include/f2c.h' and `lib/libf2c.a' files with its own
versions, and in fact will not even install `libf2c.a' for use with the
newly installed versions of `gcc' and `g77' if it sees that
`lib/libf2c.a' exists--instead, it will print an explanatory message
and skip this part of the installation.

   To install `g77''s versions of `f2c.h' and `libf2c.a' in the
appropriate places, create the file `f2c-install-ok' (e.g. via the UNIX
command `touch f2c-install-ok') in the source or build top-level
directory (the same directory in which the `g77' `f' directory resides,
not the `f' directory itself), or edit `gcc/f/Make-lang.in' and change
the definition of the `F2C_INSTALL_FLAG' macro appropriately.

   Usually, this means that, after typing `cd gcc', you would type
`touch f2c-install-ok'.

   Make sure that when you enable the overwriting of `f2c.h' and
`libf2c.a' as used by `f2c', you have a recent and properly configured
version of `bin/f2c' so that it generates code that is compatible with
`g77'.

   If you don't want installation of `g77' to overwrite `f2c''s existing
installation, but you do want `g77' installation to proceed with
installation of its own versions of `f2c.h' and `libf2c.a' in places
where `g77' will pick them up (even when linking `f2c'-compiled object
files--which might lead to incompatibilities), create the file
`f2c-exists-ok' (e.g. via the UNIX command `touch f2c-exists-ok') in
the source or build top-level directory, or edit `gcc/f/Make-lang.in'
and change the definition of the `F2CLIBOK' macro appropriately.


File: g77.info,  Node: Patching GNU Fortran,  Next: Where to Install,  Prev: Installing f2c,  Up: Complete Installation

Patching GNU Fortran
--------------------

   If you're using a SunOS4 system, you'll need to make the following
change to `gcc/f/proj.h': edit the line reading

     #define FFEPROJ_STRTOUL 1  ...

by replacing the `1' with `0'.  Or, you can avoid editing the source by
adding
     CFLAGS='-DFFEPROJ_STRTOUL=0 -g -O'
   to the command line for `make' when you invoke it.  (`-g' is the
default for `CFLAGS'.)

   This causes a minimal version of `strtoul()' provided as part of the
`g77' distribution to be compiled and linked into whatever `g77'
programs need it, since some systems (like SunOS4 with only the bundled
compiler and its runtime) do not provide this function in their system
libraries.

   Similarly, a minimal version of `bsearch()' is available and can be
enabled by editing a line similar to the one for `strtoul()' above in
`gcc/f/proj.h', if your system libraries lack `bsearch()'.  The method
of overriding `X_CFLAGS' may also be used.

   These are not problems with `g77', which requires an ANSI C
environment.  You should upgrade your system to one that provides a
full ANSI C environment, or encourage the maintainers of `gcc' to
provide one to all `gcc'-based compilers in future `gcc' distributions.

   *Note Problems Installing::, for more information on why `strtoul()'
comes up missing and on approaches to dealing with this problem that
have already been tried.


File: g77.info,  Node: Where to Install,  Next: Configuring gcc,  Prev: Patching GNU Fortran,  Up: Complete Installation

Where in the World Does Fortran (and GNU CC) Go?
------------------------------------------------

   Before configuring, you should make sure you know where you want the
`g77' and `gcc' binaries to be installed after they're built, because
this information is given to the configuration tool and used during the
build itself.

   A `g77' installation necessarily requires installation of a
`g77'-aware version of `gcc', so that the `gcc' command recognizes
Fortran source files and knows how to compile them.

   For this to work, the version of `gcc' that you will be building as
part of `g77' *must* be installed as the "active" version of `gcc' on
the system.

   Sometimes people make the mistake of installing `gcc' as
`/usr/local/bin/gcc', leaving an older, non-Fortran-aware version in
`/usr/bin/gcc'.  (Or, the opposite happens.)  This can result in `g77'
being unable to compile Fortran source files, because when it calls on
`gcc' to do the actual compilation, `gcc' complains that it does not
recognize the language, or the file name suffix.

   So, determine whether `gcc' already is installed on your system,
and, if so, *where* it is installed, and prepare to configure the new
version of `gcc' you'll be building so that it installs over the
existing version of `gcc'.

   You might want to back up your existing copy of `bin/gcc', and the
entire `lib/' directory, before you perform the actual installation (as
described in this manual).

   Existing `gcc' installations typically are found in `/usr' or
`/usr/local'.  If you aren't certain where the currently installed
version of `gcc' and its related programs reside, look at the output of
this command:

     gcc -v -o /tmp/delete-me -xc /dev/null -xnone

   All sorts of interesting information on the locations of various
`gcc'-related programs and data files should be visible in the output
of the above command.  (The output also is likely to include a
diagnostic from the linker, since there's no `main_()' function.)
However, you do have to sift through it yourself; `gcc' currently
provides no easy way to ask it where it is installed and where it looks
for the various programs and data files it calls on to do its work.

   Just *building* `g77' should not overwrite any installed
programs--but, usually, after you build `g77', you will want to install
it, so backing up anything it might overwrite is a good idea.  (This is
true for any package, not just `g77', though in this case it is
intentional that `g77' overwrites `gcc' if it is already installed--it
is unusual that the installation process for one distribution
intentionally overwrites a program or file installed by another
distribution.)

   Another reason to back up the existing version first, or make sure
you can restore it easily, is that it might be an older version on
which other users have come to depend for certain behaviors.  However,
even the new version of `gcc' you install will offer users the ability
to specify an older version of the actual compilation programs if
desired, and these older versions need not include any `g77' components.
*Note Specifying Target Machine and Compiler Version: (gcc)Target
Options, for information on the `-V' option of `gcc'.


File: g77.info,  Node: Configuring gcc,  Next: Building gcc,  Prev: Where to Install,  Up: Complete Installation

Configuring GNU CC
------------------

   `g77' is configured automatically when you configure `gcc'.  There
are two parts of `g77' that are configured in two different
ways--`g77', which "camps on" to the `gcc' configuration mechanism, and
`libf2c', which uses a variation of the GNU `autoconf' configuration
system.

   Generally, you shouldn't have to be concerned with either `g77' or
`libf2c' configuration, unless you're configuring `g77' as a
cross-compiler.  In this case, the `libf2c' configuration, and possibly
the `g77' and `gcc' configurations as well, might need special
attention.  (This also might be the case if you're porting `gcc' to a
whole new system--even if it is just a new operating system on an
existing, supported CPU.)

   To configure the system, see *Note Installing GNU CC:
(gcc)Installation, following the instructions for running `./configure'.
Pay special attention to the `--prefix=' option, which you almost
certainly will need to specify.

   (Note that `gcc' installation information is provided as a straight
text file in `gcc/INSTALL'.)

   The information printed by the invocation of `./configure' should
show that the `f' directory (the Fortran language) has been configured.
If it does not, there is a problem.

   *Note:* Configuring with the `--srcdir' argument is known to work
with GNU `make', but it is not known to work with other variants of
`make'.  Irix5.2 and SunOS4.1 versions of `make' definitely won't work
outside the source directory at present.  `g77''s portion of the
`configure' script issues a warning message about this when you
configure for building binaries outside the source directory.


File: g77.info,  Node: Building gcc,  Next: Pre-installation Checks,  Prev: Configuring gcc,  Up: Complete Installation

Building GNU CC
---------------

   Building `g77' requires building enough of `gcc' that these
instructions assume you're going to build all of `gcc', including
`g++', `protoize', and so on.  You can save a little time and disk
space by changes the `LANGUAGES' macro definition in `gcc/Makefile.in'
or `gcc/Makefile', but if you do that, you're on your own.  One change
is almost *certainly* going to cause failures: removing `c' or `f77'
from the definition of the `LANGUAGES' macro.

   After configuring `gcc', which configures `g77' and `libf2c'
automatically, you're ready to start the actual build by invoking
`make'.

   *Note:* You *must* have run `./configure' before you run `make',
even if you're using an already existing `gcc' development directory,
because `./configure' does the work to recognize that you've added
`g77' to the configuration.

   There are two general approaches to building GNU CC from scratch:

"bootstrap"
     This method uses minimal native system facilities to build a
     barebones, unoptimized `gcc', that is then used to compile
     ("bootstrap") the entire system.

"straight"
     This method assumes a more complete native system exists, and uses
     that just once to build the entire system.

   On all systems without a recent version of `gcc' already installed,
the bootstrap method must be used.  In particular, `g77' uses
extensions to the C language offered, apparently, only by `gcc'.

   On most systems with a recent version of `gcc' already installed,
the straight method can be used.  This is an advantage, because it
takes less CPU time and disk space for the build.  However, it does
require that the system have fairly recent versions of many GNU
programs and other programs, which are not enumerated here.

* Menu:

* Bootstrap Build::  For all systems.
* Straight Build::   For systems with a recent version of `gcc'.


File: g77.info,  Node: Bootstrap Build,  Next: Straight Build,  Up: Building gcc

Bootstrap Build
...............

   A complete bootstrap build is done by issuing a command beginning
with `make bootstrap ...', as described in *Note Installing GNU CC:
(gcc)Installation.  This is the most reliable form of build, but it
does require the most disk space and CPU time, since the complete system
is built twice (in Stages 2 and 3), after an initial build (during
Stage 1) of a minimal `gcc' compiler using the native compiler and
libraries.

   You might have to, or want to, control the way a bootstrap build is
done by entering the `make' commands to build each stage one at a time,
as described in the `gcc' manual.  For example, to save time or disk
space, you might want to not bother doing the Stage 3 build, in which
case you are assuming that the `gcc' compiler you have built is
basically sound (because you are giving up the opportunity to compare a
large number of object files to ensure they're identical).

   To save some disk space during installation, after Stage 2 is built,
you can type `rm -fr stage1' to remove the binaries built during Stage
1.

   *Note:* *Note Object File Differences::, for information on expected
differences in object files produced during Stage 2 and Stage 3 of a
bootstrap build.  These differences will be encountered as a result of
using the `make compare' or similar command sequence recommended by the
GNU CC installation documentation.

   Also, *Note Installing GNU CC: (gcc)Installation, for important
information on building `gcc' that is not described in this `g77'
manual.  For example, explanations of diagnostic messages and whether
they're expected, or indicate trouble, are found there.


File: g77.info,  Node: Straight Build,  Prev: Bootstrap Build,  Up: Building gcc

Straight Build
..............

   If you have a recent version of `gcc' already installed on your
system, and if you're reasonably certain it produces code that is
object-compatible with the version of `gcc' you want to build as part
of building `g77', you can save time and disk space by doing a straight
build.

   To build just the C and Fortran compilers and the necessary run-time
libraries, issue the following command:

     make -k CC=gcc LANGUAGES=f77 all g77

   (The `g77' target is necessary because the `gcc' build procedures
apparently do not automatically build command drivers for languages in
subdirectories.  It's the `all' target that triggers building
everything except, apparently, the `g77' command itself.)

   If you run into problems using this method, you have two options:

   * Abandon this approach and do a bootstrap build.

   * Try to make this approach work by diagnosing the problems you're
     running into and retrying.

   Especially if you do the latter, you might consider submitting any
solutions as bug/fix reports.  *Note Known Causes of Trouble with GNU
Fortran: Trouble.

   However, understand that many problems preventing a straight build
from working are not `g77' problems, and, in such cases, are not likely
to be addressed in future versions of `g77'.


File: g77.info,  Node: Pre-installation Checks,  Next: Installation of Binaries,  Prev: Building gcc,  Up: Complete Installation

Pre-installation Checks
-----------------------

   Before installing the system, which includes installing `gcc', you
might want to do some minimum checking to ensure that some basic things
work.

   Here are some commands you can try, and output typically printed by
them when they work:

     sh# cd /usr/src/gcc
     sh# ./g77 --driver=./xgcc -B./ -v
     g77 version 0.5.22
      ./xgcc -B./ -v -fnull-version -o /tmp/gfa18047 ...
     Reading specs from ./specs
     gcc version 2.7.2.3.f.2
      ./cpp -lang-c -v -isystem ./include -undef ...
     GNU CPP version 2.7.2.3.f.2 (Linux/Alpha)
     #include "..." search starts here:
     #include <...> search starts here:
      ./include
      /usr/local/include
      /usr/alpha-unknown-linux/include
      /usr/lib/gcc-lib/alpha-unknown-linux/2.7.2.3.f.2/include
      /usr/include
     End of search list.
      ./f771 /tmp/cca18048.i -fset-g77-defaults -quiet -dumpbase ...
     GNU F77 version 2.7.2.3.f.2 (Linux/Alpha) compiled ...
     GNU Fortran Front End version 0.5.22 compiled: ...
      as -nocpp -o /tmp/cca180481.o /tmp/cca18048.s
      ld -G 8 -O1 -o /tmp/gfa18047 /usr/lib/crt0.o -L. ...
     __G77_LIBF77_VERSION__: 0.5.22
     @(#)LIBF77 VERSION 19970404
     __G77_LIBI77_VERSION__: 0.5.22
     @(#) LIBI77 VERSION pjw,dmg-mods 19970816
     __G77_LIBU77_VERSION__: 0.5.22
     @(#) LIBU77 VERSION 19970609
     sh# ./xgcc -B./ -v -o /tmp/delete-me -xc /dev/null -xnone
     Reading specs from ./specs
     gcc version 2.7.2.3.f.2
      ./cpp -lang-c -v -isystem ./include -undef ...
     GNU CPP version 2.7.2.3.f.2 (Linux/Alpha)
     #include "..." search starts here:
     #include <...> search starts here:
      ./include
      /usr/local/include
      /usr/alpha-unknown-linux/include
      /usr/lib/gcc-lib/alpha-unknown-linux/2.7.2.3.f.2/include
      /usr/include
     End of search list.
      ./cc1 /tmp/cca18063.i -quiet -dumpbase null.c -version ...
     GNU C version 2.7.2.3.f.2 (Linux/Alpha) compiled ...
      as -nocpp -o /tmp/cca180631.o /tmp/cca18063.s
      ld -G 8 -O1 -o /tmp/delete-me /usr/lib/crt0.o -L. ...
     /usr/lib/crt0.o: In function `__start':
     crt0.S:110: undefined reference to `main'
     /usr/lib/crt0.o(.lita+0x28): undefined reference to `main'
     sh#

   (Note that long lines have been truncated, and `...'  used to
indicate such truncations.)

   The above two commands test whether `g77' and `gcc', respectively,
are able to compile empty (null) source files, whether invocation of
the C preprocessor works, whether libraries can be linked, and so on.

   If the output you get from either of the above two commands is
noticeably different, especially if it is shorter or longer in ways
that do not look consistent with the above sample output, you probably
should not install `gcc' and `g77' until you have investigated further.

   For example, you could try compiling actual applications and seeing
how that works.  (You might want to do that anyway, even if the above
tests work.)

   To compile using the not-yet-installed versions of `gcc' and `g77',
use the following commands to invoke them.

   To invoke `g77', type:

     /usr/src/gcc/g77 --driver=/usr/src/gcc/xgcc -B/usr/src/gcc/ ...

   To invoke `gcc', type:

     /usr/src/gcc/xgcc -B/usr/src/gcc/ ...


File: g77.info,  Node: Installation of Binaries,  Next: Updating Documentation,  Prev: Pre-installation Checks,  Up: Complete Installation

Installation of Binaries
------------------------

   After configuring, building, and testing `g77' and `gcc', when you
are ready to install them on your system, type:

     make -k CC=gcc LANGUAGES=f77 install

   As described in *Note Installing GNU CC: (gcc)Installation, the
values for the `CC' and `LANGUAGES' macros should be the same as those
you supplied for the build itself.

   So, the details of the above command might vary if you used a
bootstrap build (where you might be able to omit both definitions, or
might have to supply the same definitions you used when building the
final stage) or if you deviated from the instructions for a straight
build.

   If the above command does not install `libf2c.a' as expected, try
this:

     make -k ... install install-libf77 install-f2c-all

   We don't know why some non-GNU versions of `make' sometimes require
this alternate command, but they do.  (Remember to supply the
appropriate definitions for `CC' and `LANGUAGES' where you see `...' in
the above command.)

   Note that using the `-k' option tells `make' to continue after some
installation problems, like not having `makeinfo' installed on your
system.  It might not be necessary for your system.


File: g77.info,  Node: Updating Documentation,  Next: Missing bison?,  Prev: Installation of Binaries,  Up: Complete Installation

Updating Your Info Directory
----------------------------

   As part of installing `g77', you should make sure users of `info'
can easily access this manual on-line.  Do this by making sure a line
such as the following exists in `/usr/info/dir', or in whatever file is
the top-level file in the `info' directory on your system (perhaps
`/usr/local/info/dir':

     * g77: (g77).           The GNU Fortran programming language.

   If the menu in `dir' is organized into sections, `g77' probably
belongs in a section with a name such as one of the following:

   * Fortran Programming

   * Writing Programs

   * Programming Languages

   * Languages Other Than C

   * Scientific/Engineering Tools

   * GNU Compilers


File: g77.info,  Node: Missing bison?,  Next: Missing makeinfo?,  Prev: Updating Documentation,  Up: Complete Installation

Missing `bison'?
----------------

   If you cannot install `bison', make sure you have started with a
*fresh* distribution of `gcc', do *not* do `make maintainer-clean' (in
other versions of `gcc', this was called `make realclean'), and, to
ensure that `bison' is not invoked by `make' during the build, type
these commands:

     sh# cd gcc
     sh# touch bi-parser.c bi-parser.h c-parse.c c-parse.h cexp.c
     sh# touch cp/parse.c cp/parse.h objc-parse.c
     sh#

   These commands update the date-time-modified information for all the
files produced by the various invocations of `bison' in the current
versions of `gcc', so that `make' no longer believes it needs to update
them.  All of these files should already exist in a `gcc' distribution,
but the application of patches to upgrade to a newer version can leave
the modification information set such that the `bison' input files look
more "recent" than the corresponding output files.

   *Note:* New versions of `gcc' might change the set of files it
generates by invoking `bison'--if you cannot figure out for yourself
how to handle such a situation, try an older version of `gcc' until you
find someone who can (or until you obtain and install `bison').


File: g77.info,  Node: Missing makeinfo?,  Prev: Missing bison?,  Up: Complete Installation

Missing `makeinfo'?
-------------------

   If you cannot install `makeinfo', either use the `-k' option when
invoking make to specify any of the `install' or related targets, or
specify `MAKEINFO=echo' on the `make' command line.

   If you fail to do one of these things, some files, like `libf2c.a',
might not be installed, because the failed attempt by `make' to invoke
`makeinfo' causes it to cancel any further processing.


File: g77.info,  Node: Distributing Binaries,  Prev: Complete Installation,  Up: Installation

Distributing Binaries
=====================

   If you are building `g77' for distribution to others in binary form,
first make sure you are aware of your legal responsibilities (read the
file `gcc/COPYING' thoroughly).

   Then, consider your target audience and decide where `g77' should be
installed.

   For systems like GNU/Linux that have no native Fortran compiler (or
where `g77' could be considered the native compiler for Fortran and
`gcc' for C, etc.), you should definitely configure `g77' for
installation in `/usr/bin' instead of `/usr/local/bin'.  Specify the
`--prefix=/usr' option when running `./configure'.  You might also want
to set up the distribution so the `f77' command is a link to
`g77'--just make an empty file named `f77-install-ok' in the source or
build directory (the one in which the `f' directory resides, not the
`f' directory itself) when you specify one of the `install' or
`uninstall' targets in a `make' command.

   For a system that might already have `f2c' installed, you definitely
will want to make another empty file (in the same directory) named
either `f2c-exists-ok' or `f2c-install-ok'.  Use the former if you
don't want your distribution to overwrite `f2c'-related files in
existing systems; use the latter if you want to improve the likelihood
that users will be able to use both `f2c' and `g77' to compile code for
a single program without encountering link-time or run-time
incompatibilities.

   (Make sure you clearly document, in the "advertising" for your
distribution, how installation of your distribution will affect
existing installations of `gcc', `f2c', `f77', `libf2c.a', and so on.
Similarly, you should clearly document any requirements you assume are
met by users of your distribution.)

   For other systems with native `f77' (and `cc') compilers, configure
`g77' as you (or most of your audience) would configure `gcc' for their
installations.  Typically this is for installation in `/usr/local', and
would not include a copy of `g77' named `f77', so users could still use
the native `f77'.

   In any case, for `g77' to work properly, you *must* ensure that the
binaries you distribute include:

`bin/g77'
     This is the command most users use to compile Fortran.

`bin/gcc'
     This is the command all users use to compile Fortran, either
     directly or indirectly via the `g77' command.  The `bin/gcc'
     executable file must have been built from a `gcc' source tree into
     which a `g77' source tree was merged and configured, or it will
     not know how to compile Fortran programs.

`bin/f77'
     In installations with no non-GNU native Fortran compiler, this is
     the same as `bin/g77'.  Otherwise, it should be omitted from the
     distribution, so the one on already on a particular system does
     not get overwritten.

`info/g77.info*'
     This is the documentation for `g77'.  If it is not included, users
     will have trouble understanding diagnostics messages and other
     such things, and will send you a lot of email asking questions.

     Please edit this documentation (by editing `gcc/f/*.tex' and doing
     `make doc' from the `/usr/src/gcc' directory) to reflect any
     changes you've made to `g77', or at least to encourage users of
     your binary distribution to report bugs to you first.

     Also, whether you distribute binaries or install `g77' on your own
     system, it might be helpful for everyone to add a line listing
     this manual by name and topic to the top-level `info' node in
     `/usr/info/dir'.  That way, users can find `g77' documentation more
     easily.  *Note Updating Your Info Directory: Updating
     Documentation.

`man/man1/g77.1'
     This is the short man page for `g77'.  It is out of date, but you
     might as well include it for people who really like man pages.

`man/man1/f77.1'
     In installations where `f77' is the same as `g77', this is the
     same as `man/man1/g77.1'.  Otherwise, it should be omitted from
     the distribution, so the one already on a particular system does
     not get overwritten.

`lib/gcc-lib/.../f771'
     This is the actual Fortran compiler.

`lib/gcc-lib/.../libf2c.a'
     This is the run-time library for `g77'-compiled programs.

   Whether you want to include the slightly updated (and possibly
improved) versions of `cc1', `cc1plus', and whatever other binaries get
rebuilt with the changes the GNU Fortran distribution makes to the GNU
back end, is up to you.  These changes are highly unlikely to break any
compilers, and it is possible they'll fix back-end bugs that can be
demonstrated using front ends other than GNU Fortran's.

   Please assure users that unless they have a specific need for their
existing, older versions of `gcc' command, they are unlikely to
experience any problems by overwriting it with your version--though
they could certainly protect themselves by making backup copies first!
Otherwise, users might try and install your binaries in a "safe" place,
find they cannot compile Fortran programs with your distribution
(because, perhaps, they're picking up their old version of the `gcc'
command, which does not recognize Fortran programs), and assume that
your binaries (or, more generally, GNU Fortran distributions in
general) are broken, at least for their system.

   Finally, *please* ask for bug reports to go to you first, at least
until you're sure your distribution is widely used and has been well
tested.  This especially goes for those of you making any changes to
the `g77' sources to port `g77', e.g. to OS/2.  <fortran@gnu.org> has
received a fair number of bug reports that turned out to be problems
with other peoples' ports and distributions, about which nothing could
be done for the user.  Once you are quite certain a bug report does not
involve your efforts, you can forward it to us.


File: g77.info,  Node: Debugging and Interfacing,  Next: Collected Fortran Wisdom,  Prev: Installation,  Up: Top

Debugging and Interfacing
*************************

   GNU Fortran currently generates code that is object-compatible with
the `f2c' converter.  Also, it avoids limitations in the current GBE,
such as the inability to generate a procedure with multiple entry
points, by generating code that is structured differently (in terms of
procedure names, scopes, arguments, and so on) than might be expected.

   As a result, writing code in other languages that calls on, is
called by, or shares in-memory data with `g77'-compiled code generally
requires some understanding of the way `g77' compiles code for various
constructs.

   Similarly, using a debugger to debug `g77'-compiled code, even if
that debugger supports native Fortran debugging, generally requires
this sort of information.

   This section describes some of the basic information on how `g77'
compiles code for constructs involving interfaces to other languages
and to debuggers.

   *Caution:* Much or all of this information pertains to only the
current release of `g77', sometimes even to using certain compiler
options with `g77' (such as `-fno-f2c').  Do not write code that
depends on this information without clearly marking said code as
nonportable and subject to review for every new release of `g77'.  This
information is provided primarily to make debugging of code generated
by this particular release of `g77' easier for the user, and partly to
make writing (generally nonportable) interface code easier.  Both of
these activities require tracking changes in new version of `g77' as
they are installed, because new versions can change the behaviors
described in this section.

* Menu:

* Main Program Unit::  How `g77' compiles a main program unit.
* Procedures::         How `g77' constructs parameter lists
                       for procedures.
* Functions::          Functions returning floating-point or character data.
* Names::              Naming of user-defined variables, procedures, etc.
* Common Blocks::      Accessing common variables while debugging.
* Local Equivalence Areas::  Accessing `EQUIVALENCE' while debugging.
* Complex Variables::  How `g77' performs complex arithmetic.
* Arrays::             Dealing with (possibly multi-dimensional) arrays.
* Adjustable Arrays::  Special consideration for adjustable arrays.
* Alternate Entry Points::  How `g77' implements alternate `ENTRY'.
* Alternate Returns::  How `g77' handles alternate returns.
* Assigned Statement Labels::  How `g77' handles `ASSIGN'.
* Run-time Library Errors::  Meanings of some `IOSTAT=' values.


File: g77.info,  Node: Main Program Unit,  Next: Procedures,  Up: Debugging and Interfacing

Main Program Unit (PROGRAM)
===========================

   When `g77' compiles a main program unit, it gives it the public
procedure name `MAIN__'.  The `libf2c' library has the actual `main()'
procedure as is typical of C-based environments, and it is this
procedure that performs some initial start-up activity and then calls
`MAIN__'.

   Generally, `g77' and `libf2c' are designed so that you need not
include a main program unit written in Fortran in your program--it can
be written in C or some other language.  Especially for I/O handling,
this is the case, although `g77' version 0.5.16 includes a bug fix for
`libf2c' that solved a problem with using the `OPEN' statement as the
first Fortran I/O activity in a program without a Fortran main program
unit.

   However, if you don't intend to use `g77' (or `f2c') to compile your
main program unit--that is, if you intend to compile a `main()'
procedure using some other language--you should carefully examine the
code for `main()' in `libf2c', found in the source file
`gcc/f/runtime/libF77/main.c', to see what kinds of things might need
to be done by your `main()' in order to provide the Fortran environment
your Fortran code is expecting.

   For example, `libf2c''s `main()' sets up the information used by the
`IARGC' and `GETARG' intrinsics.  Bypassing `libf2c''s `main()' without
providing a substitute for this activity would mean that invoking
`IARGC' and `GETARG' would produce undefined results.

   When debugging, one implication of the fact that `main()', which is
the place where the debugged program "starts" from the debugger's point
of view, is in `libf2c' is that you won't be starting your Fortran
program at a point you recognize as your Fortran code.

   The standard way to get around this problem is to set a break point
(a one-time, or temporary, break point will do) at the entrance to
`MAIN__', and then run the program.  A convenient way to do so is to
add the `gdb' command

     tbreak MAIN__

to the file `.gdbinit' in the directory in which you're debugging
(using `gdb').

   After doing this, the debugger will see the current execution point
of the program as at the beginning of the main program unit of your
program.

   Of course, if you really want to set a break point at some other
place in your program and just start the program running, without first
breaking at `MAIN__', that should work fine.


File: g77.info,  Node: Procedures,  Next: Functions,  Prev: Main Program Unit,  Up: Debugging and Interfacing

Procedures (SUBROUTINE and FUNCTION)
====================================

   Currently, `g77' passes arguments via reference--specifically, by
passing a pointer to the location in memory of a variable, array, array
element, a temporary location that holds the result of evaluating an
expression, or a temporary or permanent location that holds the value
of a constant.

   Procedures that accept `CHARACTER' arguments are implemented by
`g77' so that each `CHARACTER' argument has two actual arguments.

   The first argument occupies the expected position in the argument
list and has the user-specified name.  This argument is a pointer to an
array of characters, passed by the caller.

   The second argument is appended to the end of the user-specified
calling sequence and is named `__g77_length_X', where X is the
user-specified name.  This argument is of the C type `ftnlen' (see
`gcc/f/runtime/f2c.h.in' for information on that type) and is the
number of characters the caller has allocated in the array pointed to
by the first argument.

   A procedure will ignore the length argument if `X' is not declared
`CHARACTER*(*)', because for other declarations, it knows the length.
Not all callers necessarily "know" this, however, which is why they all
pass the extra argument.

   The contents of the `CHARACTER' argument are specified by the
address passed in the first argument (named after it).  The procedure
can read or write these contents as appropriate.

   When more than one `CHARACTER' argument is present in the argument
list, the length arguments are appended in the order the original
arguments appear.  So `CALL FOO('HI','THERE')' is implemented in C as
`foo("hi","there",2,5);', ignoring the fact that `g77' does not provide
the trailing null bytes on the constant strings (`f2c' does provide
them, but they are unnecessary in a Fortran environment, and you should
not expect them to be there).

   Note that the above information applies to `CHARACTER' variables and
arrays *only*.  It does *not* apply to external `CHARACTER' functions
or to intrinsic `CHARACTER' functions.  That is, no second length
argument is passed to `FOO' in this case:

     CHARACTER X
     EXTERNAL X
     CALL FOO(X)

Nor does `FOO' expect such an argument in this case:

     SUBROUTINE FOO(X)
     CHARACTER X
     EXTERNAL X

   Because of this implementation detail, if a program has a bug such
that there is disagreement as to whether an argument is a procedure,
and the type of the argument is `CHARACTER', subtle symptoms might
appear.


File: g77.info,  Node: Functions,  Next: Names,  Prev: Procedures,  Up: Debugging and Interfacing

Functions (FUNCTION and RETURN)
===============================

   `g77' handles in a special way functions that return the following
types:

   * `CHARACTER'

   * `COMPLEX'

   * `REAL(KIND=1)'

   For `CHARACTER', `g77' implements a subroutine (a C function
returning `void') with two arguments prepended: `__g77_result', which
the caller passes as a pointer to a `char' array expected to hold the
return value, and `__g77_length', which the caller passes as an
`ftnlen' value specifying the length of the return value as declared in
the calling program.  For `CHARACTER*(*)', the called function uses
`__g77_length' to determine the size of the array that `__g77_result'
points to; otherwise, it ignores that argument.

   For `COMPLEX', when `-ff2c' is in force, `g77' implements a
subroutine with one argument prepended: `__g77_result', which the
caller passes as a pointer to a variable of the type of the function.
The called function writes the return value into this variable instead
of returning it as a function value.  When `-fno-f2c' is in force,
`g77' implements a `COMPLEX' function as `gcc''s `__complex__ float' or
`__complex__ double' function (or an emulation thereof, when
`-femulate-complex' is in effect), returning the result of the function
in the same way as `gcc' would.

   For `REAL(KIND=1)', when `-ff2c' is in force, `g77' implements a
function that actually returns `REAL(KIND=2)' (typically C's `double'
type).  When `-fno-f2c' is in force, `REAL(KIND=1)' functions return
`float'.


File: g77.info,  Node: Names,  Next: Common Blocks,  Prev: Functions,  Up: Debugging and Interfacing

Names
=====

   Fortran permits each implementation to decide how to represent names
as far as how they're seen in other contexts, such as debuggers and
when interfacing to other languages, and especially as far as how
casing is handled.

   External names--names of entities that are public, or "accessible",
to all modules in a program--normally have an underscore (`_') appended
by `g77', to generate code that is compatible with f2c.  External names
include names of Fortran things like common blocks, external procedures
(subroutines and functions, but not including statement functions,
which are internal procedures), and entry point names.

   However, use of the `-fno-underscoring' option disables this kind of
transformation of external names (though inhibiting the transformation
certainly improves the chances of colliding with incompatible externals
written in other languages--but that might be intentional.

   When `-funderscoring' is in force, any name (external or local) that
already has at least one underscore in it is implemented by `g77' by
appending two underscores.  (This second underscore can be disabled via
the `-fno-second-underscore' option.)  External names are changed this
way for `f2c' compatibility.  Local names are changed this way to avoid
collisions with external names that are different in the source
code--`f2c' does the same thing, but there's no compatibility issue
there except for user expectations while debugging.

   For example:

     Max_Cost = 0

Here, a user would, in the debugger, refer to this variable using the
name `max_cost__' (or `MAX_COST__' or `Max_Cost__', as described below).
(We hope to improve `g77' in this regard in the future--don't write
scripts depending on this behavior!  Also, consider experimenting with
the `-fno-underscoring' option to try out debugging without having to
massage names by hand like this.)

   `g77' provides a number of command-line options that allow the user
to control how case mapping is handled for source files.  The default
is the traditional UNIX model for Fortran compilers--names are mapped
to lower case.  Other command-line options can be specified to map
names to upper case, or to leave them exactly as written in the source
file.

   For example:

     Foo = 9.436

Here, it is normally the case that the variable assigned will be named
`foo'.  This would be the name to enter when using a debugger to access
the variable.

   However, depending on the command-line options specified, the name
implemented by `g77' might instead be `FOO' or even `Foo', thus
affecting how debugging is done.

   Also:

     Call Foo

This would normally call a procedure that, if it were in a separate C
program, be defined starting with the line:

     void foo_()

However, `g77' command-line options could be used to change the casing
of names, resulting in the name `FOO_' or `Foo_' being given to the
procedure instead of `foo_', and the `-fno-underscoring' option could
be used to inhibit the appending of the underscore to the name.


File: g77.info,  Node: Common Blocks,  Next: Local Equivalence Areas,  Prev: Names,  Up: Debugging and Interfacing

Common Blocks (COMMON)
======================

   `g77' names and lays out `COMMON' areas the same way f2c does, for
compatibility with f2c.

   Currently, `g77' does not emit "true" debugging information for
members of a `COMMON' area, due to an apparent bug in the GBE.

   (As of Version 0.5.19, `g77' emits debugging information for such
members in the form of a constant string specifying the base name of
the aggregate area and the offset of the member in bytes from the start
of the area.  Use the `-fdebug-kludge' option to enable this behavior.
In `gdb', use `set language c' before printing the value of the member,
then `set language fortran' to restore the default language, since
`gdb' doesn't provide a way to print a readable version of a character
string in Fortran language mode.

   This kludge will be removed in a future version of `g77' that, in
conjunction with a contemporary version of `gdb', properly supports
Fortran-language debugging, including access to members of `COMMON'
areas.)

   *Note Options for Code Generation Conventions: Code Gen Options, for
information on the `-fdebug-kludge' option.

   Moreover, `g77' currently implements a `COMMON' area such that its
type is an array of the C `char' data type.

   So, when debugging, you must know the offset into a `COMMON' area
for a particular item in that area, and you have to take into account
the appropriate multiplier for the respective sizes of the types (as
declared in your code) for the items preceding the item in question as
compared to the size of the `char' type.

   For example, using default implicit typing, the statement

     COMMON I(15), R(20), T

results in a public 144-byte `char' array named `_BLNK__' with `I'
placed at `_BLNK__[0]', `R' at `_BLNK__[60]', and `T' at `_BLNK__[140]'.
(This is assuming that the target machine for the compilation has
4-byte `INTEGER(KIND=1)' and `REAL(KIND=1)' types.)


File: g77.info,  Node: Local Equivalence Areas,  Next: Complex Variables,  Prev: Common Blocks,  Up: Debugging and Interfacing

Local Equivalence Areas (EQUIVALENCE)
=====================================

   `g77' treats storage-associated areas involving a `COMMON' block as
explained in the section on common blocks.

   A local `EQUIVALENCE' area is a collection of variables and arrays
connected to each other in any way via `EQUIVALENCE', none of which are
listed in a `COMMON' statement.

   Currently, `g77' does not emit "true" debugging information for
members in a local `EQUIVALENCE' area, due to an apparent bug in the
GBE.

   (As of Version 0.5.19, `g77' does emit debugging information for such
members in the form of a constant string specifying the base name of
the aggregate area and the offset of the member in bytes from the start
of the area.  Use the `-fdebug-kludge' option to enable this behavior.
In `gdb', use `set language c' before printing the value of the member,
then `set language fortran' to restore the default language, since
`gdb' doesn't provide a way to print a readable version of a character
string in Fortran language mode.

   This kludge will be removed in a future version of `g77' that, in
conjunction with a contemporary version of `gdb', properly supports
Fortran-language debugging, including access to members of
`EQUIVALENCE' areas.)

   *Note Options for Code Generation Conventions: Code Gen Options, for
information on the `-fdebug-kludge' option.

   Moreover, `g77' implements a local `EQUIVALENCE' area such that its
type is an array of the C `char' data type.

   The name `g77' gives this array of `char' type is `__g77_equiv_X',
where X is the name of the item that is placed at the beginning (offset
0) of this array.  If more than one such item is placed at the
beginning, X is the name that sorts to the top in an alphabetical sort
of the list of such items.

   When debugging, you must therefore access members of `EQUIVALENCE'
areas by specifying the appropriate `__g77_equiv_X' array section with
the appropriate offset.  See the explanation of debugging `COMMON'
blocks for info applicable to debugging local `EQUIVALENCE' areas.

   (*Note:* `g77' version 0.5.18 and earlier chose the name for X using
a different method when more than one name was in the list of names of
entities placed at the beginning of the array.  Though the
documentation specified that the first name listed in the `EQUIVALENCE'
statements was chosen for X, `g77' in fact chose the name using a
method that was so complicated, it seemed easier to change it to an
alphabetical sort than to describe the previous method in the
documentation.)


File: g77.info,  Node: Complex Variables,  Next: Arrays,  Prev: Local Equivalence Areas,  Up: Debugging and Interfacing

Complex Variables (COMPLEX)
===========================

   As of 0.5.20, `g77' defaults to handling `COMPLEX' types (and
related intrinsics, constants, functions, and so on) in a manner that
makes direct debugging involving these types in Fortran language mode
difficult.

   Essentially, `g77' implements these types using an internal
construct similar to C's `struct', at least as seen by the `gcc' back
end.

   Currently, the back end, when outputting debugging info with the
compiled code for the assembler to digest, does not detect these
`struct' types as being substitutes for Fortran complex.  As a result,
the Fortran language modes of debuggers such as `gdb' see these types
as C `struct' types, which they might or might not support.

   Until this is fixed, switch to C language mode to work with entities
of `COMPLEX' type and then switch back to Fortran language mode
afterward.  (In `gdb', this is accomplished via `set lang c' and either
`set lang fortran' or `set lang auto'.)

   *Note:* Compiling with the `-fno-emulate-complex' option avoids the
debugging problem, but is known to cause other problems like compiler
crashes and generation of incorrect code, so it is not recommended.


File: g77.info,  Node: Arrays,  Next: Adjustable Arrays,  Prev: Complex Variables,  Up: Debugging and Interfacing

Arrays (DIMENSION)
==================

   Fortran uses "column-major ordering" in its arrays.  This differs
from other languages, such as C, which use "row-major ordering".  The
difference is that, with Fortran, array elements adjacent to each other
in memory differ in the *first* subscript instead of the last;
`A(5,10,20)' immediately follows `A(4,10,20)', whereas with row-major
ordering it would follow `A(5,10,19)'.

   This consideration affects not only interfacing with and debugging
Fortran code, it can greatly affect how code is designed and written,
especially when code speed and size is a concern.

   Fortran also differs from C, a popular language for interfacing and
to support directly in debuggers, in the way arrays are treated.  In C,
arrays are single-dimensional and have interesting relationships to
pointers, neither of which is true for Fortran.  As a result, dealing
with Fortran arrays from within an environment limited to C concepts
can be challenging.

   For example, accessing the array element `A(5,10,20)' is easy enough
in Fortran (use `A(5,10,20)'), but in C some difficult machinations are
needed.  First, C would treat the A array as a single-dimension array.
Second, C does not understand low bounds for arrays as does Fortran.
Third, C assumes a low bound of zero (0), while Fortran defaults to a
low bound of one (1) and can supports an arbitrary low bound.
Therefore, calculations must be done to determine what the C equivalent
of `A(5,10,20)' would be, and these calculations require knowing the
dimensions of `A'.

   For `DIMENSION A(2:11,21,0:29)', the calculation of the offset of
`A(5,10,20)' would be:

       (5-2)
     + (10-1)*(11-2+1)
     + (20-0)*(11-2+1)*(21-1+1)
     = 4293

So the C equivalent in this case would be `a[4293]'.

   When using a debugger directly on Fortran code, the C equivalent
might not work, because some debuggers cannot understand the notion of
low bounds other than zero.  However, unlike `f2c', `g77' does inform
the GBE that a multi-dimensional array (like `A' in the above example)
is really multi-dimensional, rather than a single-dimensional array, so
at least the dimensionality of the array is preserved.

   Debuggers that understand Fortran should have no trouble with
non-zero low bounds, but for non-Fortran debuggers, especially C
debuggers, the above example might have a C equivalent of `a[4305]'.
This calculation is arrived at by eliminating the subtraction of the
lower bound in the first parenthesized expression on each line--that
is, for `(5-2)' substitute `(5)', for `(10-1)' substitute `(10)', and
for `(20-0)' substitute `(20)'.  Actually, the implication of this can
be that the expression `*(&a[2][1][0] + 4293)' works fine, but that
`a[20][10][5]' produces the equivalent of `*(&a[0][0][0] + 4305)'
because of the missing lower bounds.

   Come to think of it, perhaps the behavior is due to the debugger
internally compensating for the lower bounds by offsetting the base
address of `a', leaving `&a' set lower, in this case, than
`&a[2][1][0]' (the address of its first element as identified by
subscripts equal to the corresponding lower bounds).

   You know, maybe nobody really needs to use arrays.


File: g77.info,  Node: Adjustable Arrays,  Next: Alternate Entry Points,  Prev: Arrays,  Up: Debugging and Interfacing

Adjustable Arrays (DIMENSION)
=============================

   Adjustable and automatic arrays in Fortran require the implementation
(in this case, the `g77' compiler) to "memorize" the expressions that
dimension the arrays each time the procedure is invoked.  This is so
that subsequent changes to variables used in those expressions, made
during execution of the procedure, do not have any effect on the
dimensions of those arrays.

   For example:

     REAL ARRAY(5)
     DATA ARRAY/5*2/
     CALL X(ARRAY, 5)
     END
     SUBROUTINE X(A, N)
     DIMENSION A(N)
     N = 20
     PRINT *, N, A
     END

Here, the implementation should, when running the program, print
something like:

     20   2.  2.  2.  2.  2.

Note that this shows that while the value of `N' was successfully
changed, the size of the `A' array remained at 5 elements.

   To support this, `g77' generates code that executes before any user
code (and before the internally generated computed `GOTO' to handle
alternate entry points, as described below) that evaluates each
(nonconstant) expression in the list of subscripts for an array, and
saves the result of each such evaluation to be used when determining
the size of the array (instead of re-evaluating the expressions).

   So, in the above example, when `X' is first invoked, code is
executed that copies the value of `N' to a temporary.  And that same
temporary serves as the actual high bound for the single dimension of
the `A' array (the low bound being the constant 1).  Since the user
program cannot (legitimately) change the value of the temporary during
execution of the procedure, the size of the array remains constant
during each invocation.

   For alternate entry points, the code `g77' generates takes into
account the possibility that a dummy adjustable array is not actually
passed to the actual entry point being invoked at that time.  In that
case, the public procedure implementing the entry point passes to the
master private procedure implementing all the code for the entry points
a `NULL' pointer where a pointer to that adjustable array would be
expected.  The `g77'-generated code doesn't attempt to evaluate any of
the expressions in the subscripts for an array if the pointer to that
array is `NULL' at run time in such cases.  (Don't depend on this
particular implementation by writing code that purposely passes `NULL'
pointers where the callee expects adjustable arrays, even if you know
the callee won't reference the arrays--nor should you pass `NULL'
pointers for any dummy arguments used in calculating the bounds of such
arrays or leave undefined any values used for that purpose in
COMMON--because the way `g77' implements these things might change in
the future!)


File: g77.info,  Node: Alternate Entry Points,  Next: Alternate Returns,  Prev: Adjustable Arrays,  Up: Debugging and Interfacing

Alternate Entry Points (ENTRY)
==============================

   The GBE does not understand the general concept of alternate entry
points as Fortran provides via the ENTRY statement.  `g77' gets around
this by using an approach to compiling procedures having at least one
`ENTRY' statement that is almost identical to the approach used by
`f2c'.  (An alternate approach could be used that would probably
generate faster, but larger, code that would also be a bit easier to
debug.)

   Information on how `g77' implements `ENTRY' is provided for those
trying to debug such code.  The choice of implementation seems unlikely
to affect code (compiled in other languages) that interfaces to such
code.

   `g77' compiles exactly one public procedure for the primary entry
point of a procedure plus each `ENTRY' point it specifies, as usual.
That is, in terms of the public interface, there is no difference
between

     SUBROUTINE X
     END
     SUBROUTINE Y
     END

and:

     SUBROUTINE X
     ENTRY Y
     END

   The difference between the above two cases lies in the code compiled
for the `X' and `Y' procedures themselves, plus the fact that, for the
second case, an extra internal procedure is compiled.

   For every Fortran procedure with at least one `ENTRY' statement,
`g77' compiles an extra procedure named `__g77_masterfun_X', where X is
the name of the primary entry point (which, in the above case, using
the standard compiler options, would be `x_' in C).

   This extra procedure is compiled as a private procedure--that is, a
procedure not accessible by name to separately compiled modules.  It
contains all the code in the program unit, including the code for the
primary entry point plus for every entry point.  (The code for each
public procedure is quite short, and explained later.)

   The extra procedure has some other interesting characteristics.

   The argument list for this procedure is invented by `g77'.  It
contains a single integer argument named `__g77_which_entrypoint',
passed by value (as in Fortran's `%VAL()' intrinsic), specifying the
entry point index--0 for the primary entry point, 1 for the first entry
point (the first `ENTRY' statement encountered), 2 for the second entry
point, and so on.

   It also contains, for functions returning `CHARACTER' and (when
`-ff2c' is in effect) `COMPLEX' functions, and for functions returning
different types among the `ENTRY' statements (e.g. `REAL FUNCTION R()'
containing `ENTRY I()'), an argument named `__g77_result' that is
expected at run time to contain a pointer to where to store the result
of the entry point.  For `CHARACTER' functions, this storage area is an
array of the appropriate number of characters; for `COMPLEX' functions,
it is the appropriate area for the return type; for
multiple-return-type functions, it is a union of all the supported
return types (which cannot include `CHARACTER', since combining
`CHARACTER' and non-`CHARACTER' return types via `ENTRY' in a single
function is not supported by `g77').

   For `CHARACTER' functions, the `__g77_result' argument is followed
by yet another argument named `__g77_length' that, at run time,
specifies the caller's expected length of the returned value.  Note
that only `CHARACTER*(*)' functions and entry points actually make use
of this argument, even though it is always passed by all callers of
public `CHARACTER' functions (since the caller does not generally know
whether such a function is `CHARACTER*(*)' or whether there are any
other callers that don't have that information).

   The rest of the argument list is the union of all the arguments
specified for all the entry points (in their usual forms, e.g.
`CHARACTER' arguments have extra length arguments, all appended at the
end of this list).  This is considered the "master list" of arguments.

   The code for this procedure has, before the code for the first
executable statement, code much like that for the following Fortran
statement:

            GOTO (100000,100001,100002), __g77_which_entrypoint
     100000 ...code for primary entry point...
     100001 ...code immediately following first ENTRY statement...
     100002 ...code immediately following second ENTRY statement...

(Note that invalid Fortran statement labels and variable names are used
in the above example to highlight the fact that it represents code
generated by the `g77' internals, not code to be written by the user.)

   It is this code that, when the procedure is called, picks which
entry point to start executing.

   Getting back to the public procedures (`x' and `Y' in the original
example), those procedures are fairly simple.  Their interfaces are
just like they would be if they were self-contained procedures (without
`ENTRY'), of course, since that is what the callers expect.  Their code
consists of simply calling the private procedure, described above, with
the appropriate extra arguments (the entry point index, and perhaps a
pointer to a multiple-type- return variable, local to the public
procedure, that contains all the supported returnable non-character
types).  For arguments that are not listed for a given entry point that
are listed for other entry points, and therefore that are in the
"master list" for the private procedure, null pointers (in C, the
`NULL' macro) are passed.  Also, for entry points that are part of a
multiple-type- returning function, code is compiled after the call of
the private procedure to extract from the multi-type union the
appropriate result, depending on the type of the entry point in
question, returning that result to the original caller.

   When debugging a procedure containing alternate entry points, you
can either set a break point on the public procedure itself (e.g.  a
break point on `X' or `Y') or on the private procedure that contains
most of the pertinent code (e.g. `__g77_masterfun_X').  If you do the
former, you should use the debugger's command to "step into" the called
procedure to get to the actual code; with the latter approach, the
break point leaves you right at the actual code, skipping over the
public entry point and its call to the private procedure (unless you
have set a break point there as well, of course).

   Further, the list of dummy arguments that is visible when the
private procedure is active is going to be the expanded version of the
list for whichever particular entry point is active, as explained
above, and the way in which return values are handled might well be
different from how they would be handled for an equivalent single-entry
function.


File: g77.info,  Node: Alternate Returns,  Next: Assigned Statement Labels,  Prev: Alternate Entry Points,  Up: Debugging and Interfacing

Alternate Returns (SUBROUTINE and RETURN)
=========================================

   Subroutines with alternate returns (e.g. `SUBROUTINE X(*)' and `CALL
X(*50)') are implemented by `g77' as functions returning the C `int'
type.  The actual alternate-return arguments are omitted from the
calling sequence.  Instead, the caller uses the return value to do a
rough equivalent of the Fortran computed-`GOTO' statement, as in `GOTO
(50), X()' in the example above (where `X' is quietly declared as an
`INTEGER(KIND=1)' function), and the callee just returns whatever
integer is specified in the `RETURN' statement for the subroutine For
example, `RETURN 1' is implemented as `X = 1' followed by `RETURN' in
C, and `RETURN' by itself is `X = 0' and `RETURN').


File: g77.info,  Node: Assigned Statement Labels,  Next: Run-time Library Errors,  Prev: Alternate Returns,  Up: Debugging and Interfacing

Assigned Statement Labels (ASSIGN and GOTO)
===========================================

   For portability to machines where a pointer (such as to a label,
which is how `g77' implements `ASSIGN' and its relatives, the
assigned-`GOTO' and assigned-`FORMAT'-I/O statements) is wider
(bitwise) than an `INTEGER(KIND=1)', `g77' uses a different memory
location to hold the `ASSIGN'ed value of a variable than it does the
numerical value in that variable, unless the variable is wide enough
(can hold enough bits).

   In particular, while `g77' implements

     I = 10

as, in C notation, `i = 10;', it implements

     ASSIGN 10 TO I

as, in GNU's extended C notation (for the label syntax),
`__g77_ASSIGN_I = &&L10;' (where `L10' is just a massaging of the
Fortran label `10' to make the syntax C-like; `g77' doesn't actually
generate the name `L10' or any other name like that, since debuggers
cannot access labels anyway).

   While this currently means that an `ASSIGN' statement does not
overwrite the numeric contents of its target variable, *do not* write
any code depending on this feature.  `g77' has already changed this
implementation across versions and might do so in the future.  This
information is provided only to make debugging Fortran programs
compiled with the current version of `g77' somewhat easier.  If there's
no debugger-visible variable named `__g77_ASSIGN_I' in a program unit
that does `ASSIGN 10 TO I', that probably means `g77' has decided it
can store the pointer to the label directly into `I' itself.

   *Note Ugly Assigned Labels::, for information on a command-line
option to force `g77' to use the same storage for both normal and
assigned-label uses of a variable.


File: g77.info,  Node: Run-time Library Errors,  Prev: Assigned Statement Labels,  Up: Debugging and Interfacing

Run-time Library Errors
=======================

   The `libf2c' library currently has the following table to relate
error code numbers, returned in `IOSTAT=' variables, to messages.  This
information should, in future versions of this document, be expanded
upon to include detailed descriptions of each message.

   In line with good coding practices, any of the numbers in the list
below should *not* be directly written into Fortran code you write.
Instead, make a separate `INCLUDE' file that defines `PARAMETER' names
for them, and use those in your code, so you can more easily change the
actual numbers in the future.

   The information below is culled from the definition of `F_err' in
`f/runtime/libI77/err.c' in the `g77' source tree.

     100: "error in format"
     101: "illegal unit number"
     102: "formatted io not allowed"
     103: "unformatted io not allowed"
     104: "direct io not allowed"
     105: "sequential io not allowed"
     106: "can't backspace file"
     107: "null file name"
     108: "can't stat file"
     109: "unit not connected"
     110: "off end of record"
     111: "truncation failed in endfile"
     112: "incomprehensible list input"
     113: "out of free space"
     114: "unit not connected"
     115: "read unexpected character"
     116: "bad logical input field"
     117: "bad variable type"
     118: "bad namelist name"
     119: "variable not in namelist"
     120: "no end record"
     121: "variable count incorrect"
     122: "subscript for scalar variable"
     123: "invalid array section"
     124: "substring out of bounds"
     125: "subscript out of bounds"
     126: "can't read file"
     127: "can't write file"
     128: "'new' file exists"
     129: "can't append to file"
     130: "non-positive record number"
     131: "I/O started while already doing I/O"


File: g77.info,  Node: Collected Fortran Wisdom,  Next: Trouble,  Prev: Debugging and Interfacing,  Up: Top

Collected Fortran Wisdom
************************

   Most users of `g77' can be divided into two camps:

   * Those writing new Fortran code to be compiled by `g77'.

   * Those using `g77' to compile existing, "legacy" code.

   Users writing new code generally understand most of the necessary
aspects of Fortran to write "mainstream" code, but often need help
deciding how to handle problems, such as the construction of libraries
containing `BLOCK DATA'.

   Users dealing with "legacy" code sometimes don't have much
experience with Fortran, but believe that the code they're compiling
already works when compiled by other compilers (and might not
understand why, as is sometimes the case, it doesn't work when compiled
by `g77').

   The following information is designed to help users do a better job
coping with existing, "legacy" Fortran code, and with writing new code
as well.

* Menu:

* Advantages Over f2c::        If `f2c' is so great, why `g77'?
* Block Data and Libraries::   How `g77' solves a common problem.
* Loops::                      Fortran `DO' loops surprise many people.
* Working Programs::           Getting programs to work should be done first.
* Overly Convenient Options::  Temptations to avoid, habits to not form.
* Faster Programs::            Everybody wants these, but at what cost?


File: g77.info,  Node: Advantages Over f2c,  Next: Block Data and Libraries,  Up: Collected Fortran Wisdom

Advantages Over f2c
===================

   Without `f2c', `g77' would have taken much longer to do and probably
not been as good for quite a while.  Sometimes people who notice how
much `g77' depends on, and documents encouragement to use, `f2c' ask
why `g77' was created if `f2c' already existed.

   This section gives some basic answers to these questions, though it
is not intended to be comprehensive.

* Menu:

* Language Extensions::  Features used by Fortran code.
* Compiler Options::     Features helpful during development.
* Compiler Speed::       Speed of the compilation process.
* Program Speed::        Speed of the generated, optimized code.
* Ease of Debugging::    Debugging ease-of-use at the source level.
* Character and Hollerith Constants::  A byte saved is a byte earned.


File: g77.info,  Node: Language Extensions,  Next: Compiler Options,  Up: Advantages Over f2c

Language Extensions
-------------------

   `g77' offers several extensions to the Fortran language that `f2c'
doesn't.

   However, `f2c' offers a few that `g77' doesn't, like fairly complete
support for `INTEGER*2'.  It is expected that `g77' will offer some or
all of these missing features at some time in the future.  (Version
0.5.18 of `g77' offers some rudimentary support for some of these
features.)


File: g77.info,  Node: Compiler Options,  Next: Compiler Speed,  Prev: Language Extensions,  Up: Advantages Over f2c

Compiler Options
----------------

   `g77' offers a whole bunch of compiler options that `f2c' doesn't.

   However, `f2c' offers a few that `g77' doesn't, like an option to
generate code to check array subscripts at run time.  It is expected
that `g77' will offer some or all of these missing options at some time
in the future.


File: g77.info,  Node: Compiler Speed,  Next: Program Speed,  Prev: Compiler Options,  Up: Advantages Over f2c

Compiler Speed
--------------

   Saving the steps of writing and then rereading C code is a big reason
why `g77' should be able to compile code much faster than using `f2c'
in conjunction with the equivalent invocation of `gcc'.

   However, due to `g77''s youth, lots of self-checking is still being
performed.  As a result, this improvement is as yet unrealized (though
the potential seems to be there for quite a big speedup in the future).
It is possible that, as of version 0.5.18, `g77' is noticeably faster
compiling many Fortran source files than using `f2c' in conjunction
with `gcc'.


File: g77.info,  Node: Program Speed,  Next: Ease of Debugging,  Prev: Compiler Speed,  Up: Advantages Over f2c

Program Speed
-------------

   `g77' has the potential to better optimize code than `f2c', even
when `gcc' is used to compile the output of `f2c', because `f2c' must
necessarily translate Fortran into a somewhat lower-level language (C)
that cannot preserve all the information that is potentially useful for
optimization, while `g77' can gather, preserve, and transmit that
information directly to the GBE.

   For example, `g77' implements `ASSIGN' and assigned `GOTO' using
direct assignment of pointers to labels and direct jumps to labels,
whereas `f2c' maps the assigned labels to integer values and then uses
a C `switch' statement to encode the assigned `GOTO' statements.

   However, as is typical, theory and reality don't quite match, at
least not in all cases, so it is still the case that `f2c' plus `gcc'
can generate code that is faster than `g77'.

   Version 0.5.18 of `g77' offered default settings and options, via
patches to the `gcc' back end, that allow for better program speed,
though some of these improvements also affected the performance of
programs translated by `f2c' and then compiled by `g77''s version of
`gcc'.

   Version 0.5.20 of `g77' offers further performance improvements, at
least one of which (alias analysis) is not generally applicable to
`f2c' (though `f2c' could presumably be changed to also take advantage
of this new capability of the `gcc' back end, assuming this is made
available in an upcoming release of `gcc').


File: g77.info,  Node: Ease of Debugging,  Next: Character and Hollerith Constants,  Prev: Program Speed,  Up: Advantages Over f2c

Ease of Debugging
-----------------

   Because `g77' compiles directly to assembler code like `gcc',
instead of translating to an intermediate language (C) as does `f2c',
support for debugging can be better for `g77' than `f2c'.

   However, although `g77' might be somewhat more "native" in terms of
debugging support than `f2c' plus `gcc', there still are a lot of
things "not quite right".  Many of the important ones should be
resolved in the near future.

   For example, `g77' doesn't have to worry about reserved names like
`f2c' does.  Given `FOR = WHILE', `f2c' must necessarily translate this
to something *other* than `for = while;', because C reserves those
words.

   However, `g77' does still uses things like an extra level of
indirection for `ENTRY'-laden procedures--in this case, because the
back end doesn't yet support multiple entry points.

   Another example is that, given

     COMMON A, B
     EQUIVALENCE (B, C)

the `g77' user should be able to access the variables directly, by name,
without having to traverse C-like structures and unions, while `f2c' is
unlikely to ever offer this ability (due to limitations in the C
language).

   However, due to apparent bugs in the back end, `g77' currently
doesn't take advantage of this facility at all--it doesn't emit any
debugging information for `COMMON' and `EQUIVALENCE' areas, other than
information on the array of `char' it creates (and, in the case of
local `EQUIVALENCE', names) for each such area.

   Yet another example is arrays.  `g77' represents them to the debugger
using the same "dimensionality" as in the source code, while `f2c' must
necessarily convert them all to one-dimensional arrays to fit into the
confines of the C language.  However, the level of support offered by
debuggers for interactive Fortran-style access to arrays as compiled by
`g77' can vary widely.  In some cases, it can actually be an advantage
that `f2c' converts everything to widely supported C semantics.

   In fairness, `g77' could do many of the things `f2c' does to get
things working at least as well as `f2c'--for now, the developers
prefer making `g77' work the way they think it is supposed to, and
finding help improving the other products (the back end of `gcc';
`gdb'; and so on) to get things working properly.


File: g77.info,  Node: Character and Hollerith Constants,  Prev: Ease of Debugging,  Up: Advantages Over f2c

Character and Hollerith Constants
---------------------------------

   To avoid the extensive hassle that would be needed to avoid this,
`f2c' uses C character constants to encode character and Hollerith
constants.  That means a constant like `'HELLO'' is translated to
`"hello"' in C, which further means that an extra null byte is present
at the end of the constant.  This null byte is superfluous.

   `g77' does not generate such null bytes.  This represents significant
savings of resources, such as on systems where `/dev/null' or
`/dev/zero' represent bottlenecks in the systems' performance, because
`g77' simply asks for fewer zeros from the operating system than `f2c'.


File: g77.info,  Node: Block Data and Libraries,  Next: Loops,  Prev: Advantages Over f2c,  Up: Collected Fortran Wisdom

Block Data and Libraries
========================

   To ensure that block data program units are linked, especially a
concern when they are put into libraries, give each one a name (as in
`BLOCK DATA FOO') and make sure there is an `EXTERNAL FOO' statement in
every program unit that uses any common block initialized by the
corresponding `BLOCK DATA'.  `g77' currently compiles a `BLOCK DATA' as
if it were a `SUBROUTINE', that is, it generates an actual procedure
having the appropriate name.  The procedure does nothing but return
immediately if it happens to be called.  For `EXTERNAL FOO', where
`FOO' is not otherwise referenced in the same program unit, `g77'
assumes there exists a `BLOCK DATA FOO' in the program and ensures that
by generating a reference to it so the linker will make sure it is
present.  (Specifically, `g77' outputs in the data section a static
pointer to the external name `FOO'.)

   The implementation `g77' currently uses to make this work is one of
the few things not compatible with `f2c' as currently shipped.  `f2c'
currently does nothing with `EXTERNAL FOO' except issue a warning that
`FOO' is not otherwise referenced, and for `BLOCK DATA FOO', f2c
doesn't generate a dummy procedure with the name `FOO'.  The upshot is
that you shouldn't mix `f2c' and `g77' in this particular case.  If you
use f2c to compile `BLOCK DATA FOO', then any `g77'-compiled program
unit that says `EXTERNAL FOO' will result in an unresolved reference
when linked.  If you do the opposite, then `FOO' might not be linked in
under various circumstances (such as when `FOO' is in a library, or
you're using a "clever" linker--so clever, it produces a broken program
with little or no warning by omitting initializations of global data
because they are contained in unreferenced procedures).

   The changes you make to your code to make `g77' handle this
situation, however, appear to be a widely portable way to handle it.
That is, many systems permit it (as they should, since the FORTRAN 77
standard permits `EXTERNAL FOO' when `FOO' is a block data program
unit), and of the ones that might not link `BLOCK DATA FOO' under some
circumstances, most of them appear to do so once `EXTERNAL FOO' is
present in the appropriate program units.

   Here is the recommended approach to modifying a program containing a
program unit such as the following:

     BLOCK DATA FOO
     COMMON /VARS/ X, Y, Z
     DATA X, Y, Z / 3., 4., 5. /
     END

If the above program unit might be placed in a library module, then
ensure that every program unit in every program that references that
particular `COMMON' area uses the `EXTERNAL' statement to force the
area to be initialized.

   For example, change a program unit that starts with

     INTEGER FUNCTION CURX()
     COMMON /VARS/ X, Y, Z
     CURX = X
     END

so that it uses the `EXTERNAL' statement, as in:

     INTEGER FUNCTION CURX()
     COMMON /VARS/ X, Y, Z
     EXTERNAL FOO
     CURX = X
     END

That way, `CURX' is compiled by `g77' (and many other compilers) so
that the linker knows it must include `FOO', the `BLOCK DATA' program
unit that sets the initial values for the variables in `VAR', in the
executable program.


File: g77.info,  Node: Loops,  Next: Working Programs,  Prev: Block Data and Libraries,  Up: Collected Fortran Wisdom

Loops
=====

   The meaning of a `DO' loop in Fortran is precisely specified in the
Fortran standard...and is quite different from what many programmers
might expect.

   In particular, Fortran `DO' loops are implemented as if the number
of trips through the loop is calculated *before* the loop is entered.

   The number of trips for a loop is calculated from the START, END,
and INCREMENT values specified in a statement such as:

     DO ITER = START, END, INCREMENT

The trip count is evaluated using a fairly simple formula based on the
three values following the `=' in the statement, and it is that trip
count that is effectively decremented during each iteration of the loop.
If, at the beginning of an iteration of the loop, the trip count is
zero or negative, the loop terminates.  The per-loop-iteration
modifications to ITER are not related to determining whether to
terminate the loop.

   There are two important things to remember about the trip count:

   * It can be *negative*, in which case it is treated as if it was
     zero--meaning the loop is not executed at all.

   * The type used to *calculate* the trip count is the same type as
     ITER, but the final calculation, and thus the type of the trip
     count itself, always is `INTEGER(KIND=1)'.

   These two items mean that there are loops that cannot be written in
straightforward fashion using the Fortran `DO'.

   For example, on a system with the canonical 32-bit two's-complement
implementation of `INTEGER(KIND=1)', the following loop will not work:

     DO I = -2000000000, 2000000000

Although the START and END values are well within the range of
`INTEGER(KIND=1)', the *trip count* is not.  The expected trip count is
40000000001, which is outside the range of `INTEGER(KIND=1)' on many
systems.

   Instead, the above loop should be constructed this way:

     I = -2000000000
     DO
       IF (I .GT. 2000000000) EXIT
       ...
       I = I + 1
     END DO

The simple `DO' construct and the `EXIT' statement (used to leave the
innermost loop) are F90 features that `g77' supports.

   Some Fortran compilers have buggy implementations of `DO', in that
they don't follow the standard.  They implement `DO' as a
straightforward translation to what, in C, would be a `for' statement.
Instead of creating a temporary variable to hold the trip count as
calculated at run time, these compilers use the iteration variable ITER
to control whether the loop continues at each iteration.

   The bug in such an implementation shows up when the trip count is
within the range of the type of ITER, but the magnitude of `ABS(END) +
ABS(INCR)' exceeds that range.  For example:

     DO I = 2147483600, 2147483647

A loop started by the above statement will work as implemented by
`g77', but the use, by some compilers, of a more C-like implementation
akin to

     for (i = 2147483600; i <= 2147483647; ++i)

produces a loop that does not terminate, because `i' can never be
greater than 2147483647, since incrementing it beyond that value
overflows `i', setting it to -2147483648.  This is a large, negative
number that still is less than 2147483647.

   Another example of unexpected behavior of `DO' involves using a
nonintegral iteration variable ITER, that is, a `REAL' variable.
Consider the following program:

           DATA BEGIN, END, STEP /.1, .31, .007/
           DO 10 R = BEGIN, END, STEP
              IF (R .GT. END) PRINT *, R, ' .GT. ', END, '!!'
              PRINT *,R
     10    CONTINUE
           PRINT *,'LAST = ',R
           IF (R .LE. END) PRINT *, R, ' .LE. ', END, '!!'
           END

A C-like view of `DO' would hold that the two "exclamatory" `PRINT'
statements are never executed.  However, this is the output of running
the above program as compiled by `g77' on a GNU/Linux ix86 system:

      .100000001
      .107000001
      .114
      .120999999
      ...
      .289000005
      .296000004
      .303000003
     LAST =   .310000002
      .310000002 .LE.   .310000002!!

   Note that one of the two checks in the program turned up an apparent
violation of the programmer's expectation--yet, the loop is correctly
implemented by `g77', in that it has 30 iterations.  This trip count of
30 is correct when evaluated using the floating-point representations
for the BEGIN, END, and INCR values (.1, .31, .007) on GNU/Linux ix86
are used.  On other systems, an apparently more accurate trip count of
31 might result, but, nevertheless, `g77' is faithfully following the
Fortran standard, and the result is not what the author of the sample
program above apparently expected.  (Such other systems might, for
different values in the `DATA' statement, violate the other
programmer's expectation, for example.)

   Due to this combination of imprecise representation of
floating-point values and the often-misunderstood interpretation of
`DO' by standard-conforming compilers such as `g77', use of `DO' loops
with `REAL' iteration variables is not recommended.  Such use can be
caught by specifying `-Wsurprising'.  *Note Warning Options::, for more
information on this option.


File: g77.info,  Node: Working Programs,  Next: Overly Convenient Options,  Prev: Loops,  Up: Collected Fortran Wisdom

Working Programs
================

   Getting Fortran programs to work in the first place can be quite a
challenge--even when the programs already work on other systems, or
when using other compilers.

   `g77' offers some facilities that might be useful for tracking down
bugs in such programs.

* Menu:

* Not My Type::
* Variables Assumed To Be Zero::
* Variables Assumed To Be Saved::
* Unwanted Variables::
* Unused Arguments::
* Surprising Interpretations of Code::
* Aliasing Assumed To Work::
* Output Assumed To Flush::
* Large File Unit Numbers::


File: g77.info,  Node: Not My Type,  Next: Variables Assumed To Be Zero,  Up: Working Programs

Not My Type
-----------

   A fruitful source of bugs in Fortran source code is use, or mis-use,
of Fortran's implicit-typing feature, whereby the type of a variable,
array, or function is determined by the first character of its name.

   Simple cases of this include statements like `LOGX=9.227', without a
statement such as `REAL LOGX'.  In this case, `LOGX' is implicitly
given `INTEGER(KIND=1)' type, with the result of the assignment being
that it is given the value `9'.

   More involved cases include a function that is defined starting with
a statement like `DOUBLE PRECISION FUNCTION IPS(...)'.  Any caller of
this function that does not also declare `IPS' as type `DOUBLE
PRECISION' (or, in GNU Fortran, `REAL(KIND=2)') is likely to assume it
returns `INTEGER', or some other type, leading to invalid results or
even program crashes.

   The `-Wimplicit' option might catch failures to properly specify the
types of variables, arrays, and functions in the code.

   However, in code that makes heavy use of Fortran's implicit-typing
facility, this option might produce so many warnings about cases that
are working, it would be hard to find the one or two that represent
bugs.  This is why so many experienced Fortran programmers strongly
recommend widespread use of the `IMPLICIT NONE' statement, despite it
not being standard FORTRAN 77, to completely turn off implicit typing.
(`g77' supports `IMPLICIT NONE', as do almost all FORTRAN 77 compilers.)

   Note that `-Wimplicit' catches only implicit typing of *names*.  It
does not catch implicit typing of expressions such as `X**(2/3)'.  Such
expressions can be buggy as well--in fact, `X**(2/3)' is equivalent to
`X**0', due to the way Fortran expressions are given types and then
evaluated.  (In this particular case, the programmer probably wanted
`X**(2./3.)'.)


File: g77.info,  Node: Variables Assumed To Be Zero,  Next: Variables Assumed To Be Saved,  Prev: Not My Type,  Up: Working Programs

Variables Assumed To Be Zero
----------------------------

   Many Fortran programs were developed on systems that provided
automatic initialization of all, or some, variables and arrays to zero.
As a result, many of these programs depend, sometimes inadvertently, on
this behavior, though to do so violates the Fortran standards.

   You can ask `g77' for this behavior by specifying the
`-finit-local-zero' option when compiling Fortran code.  (You might
want to specify `-fno-automatic' as well, to avoid code-size inflation
for non-optimized compilations.)

   Note that a program that works better when compiled with the
`-finit-local-zero' option is almost certainly depending on a
particular system's, or compiler's, tendency to initialize some
variables to zero.  It might be worthwhile finding such cases and
fixing them, using techniques such as compiling with the `-O
-Wuninitialized' options using `g77'.


File: g77.info,  Node: Variables Assumed To Be Saved,  Next: Unwanted Variables,  Prev: Variables Assumed To Be Zero,  Up: Working Programs

Variables Assumed To Be Saved
-----------------------------

   Many Fortran programs were developed on systems that saved the
values of all, or some, variables and arrays across procedure calls.
As a result, many of these programs depend, sometimes inadvertently, on
being able to assign a value to a variable, perform a `RETURN' to a
calling procedure, and, upon subsequent invocation, reference the
previously assigned variable to obtain the value.

   They expect this despite not using the `SAVE' statement to specify
that the value in a variable is expected to survive procedure returns
and calls.  Depending on variables and arrays to retain values across
procedure calls without using `SAVE' to require it violates the Fortran
standards.

   You can ask `g77' to assume `SAVE' is specified for all relevant
(local) variables and arrays by using the `-fno-automatic' option.

   Note that a program that works better when compiled with the
`-fno-automatic' option is almost certainly depending on not having to
use the `SAVE' statement as required by the Fortran standard.  It might
be worthwhile finding such cases and fixing them, using techniques such
as compiling with the `-O -Wuninitialized' options using `g77'.


File: g77.info,  Node: Unwanted Variables,  Next: Unused Arguments,  Prev: Variables Assumed To Be Saved,  Up: Working Programs

Unwanted Variables
------------------

   The `-Wunused' option can find bugs involving implicit typing,
sometimes more easily than using `-Wimplicit' in code that makes heavy
use of implicit typing.  An unused variable or array might indicate
that the spelling for its declaration is different from that of its
intended uses.

   Other than cases involving typos, unused variables rarely indicate
actual bugs in a program.  However, investigating such cases thoroughly
has, on occasion, led to the discovery of code that had not been
completely written--where the programmer wrote declarations as needed
for the whole algorithm, wrote some or even most of the code for that
algorithm, then got distracted and forgot that the job was not complete.


File: g77.info,  Node: Unused Arguments,  Next: Surprising Interpretations of Code,  Prev: Unwanted Variables,  Up: Working Programs

Unused Arguments
----------------

   As with unused variables, It is possible that unused arguments to a
procedure might indicate a bug.  Compile with `-W -Wunused' option to
catch cases of unused arguments.

   Note that `-W' also enables warnings regarding overflow of
floating-point constants under certain circumstances.


File: g77.info,  Node: Surprising Interpretations of Code,  Next: Aliasing Assumed To Work,  Prev: Unused Arguments,  Up: Working Programs

Surprising Interpretations of Code
----------------------------------

   The `-Wsuprising' option can help find bugs involving expression
evaluation or in the way `DO' loops with non-integral iteration
variables are handled.  Cases found by this option might indicate a
difference of interpretation between the author of the code involved,
and a standard-conforming compiler such as `g77'.  Such a difference
might produce actual bugs.

   In any case, changing the code to explicitly do what the programmer
might have expected it to do, so `g77' and other compilers are more
likely to follow the programmer's expectations, might be worthwhile,
especially if such changes make the program work better.


File: g77.info,  Node: Aliasing Assumed To Work,  Next: Output Assumed To Flush,  Prev: Surprising Interpretations of Code,  Up: Working Programs

Aliasing Assumed To Work
------------------------

   The `-falias-check', `-fargument-alias', `-fargument-noalias', and
`-fno-argument-noalias-global' options, introduced in version 0.5.20 and
`g77''s version 2.7.2.2.f.2 of `gcc', control the assumptions regarding
aliasing (overlapping) of writes and reads to main memory (core) made
by the `gcc' back end.

   They are effective only when compiling with `-O' (specifying any
level other than `-O0') or with `-falias-check'.

   The default for Fortran code is `-fargument-noalias-global'.  (The
default for C code and code written in other C-based languages is
`-fargument-alias'.  These defaults apply regardless of whether you use
`g77' or `gcc' to compile your code.)

   Note that, on some systems, compiling with `-fforce-addr' in effect
can produce more optimal code when the default aliasing options are in
effect (and when optimization is enabled).

   If your program is not working when compiled with optimization, it
is possible it is violating the Fortran standards (77 and 90) by
relying on the ability to "safely" modify variables and arrays that are
aliased, via procedure calls, to other variables and arrays, without
using `EQUIVALENCE' to explicitly set up this kind of aliasing.

   (The FORTRAN 77 standard's prohibition of this sort of overlap,
generally referred to therein as "storage assocation", appears in
Sections 15.9.3.6.  This prohibition allows implementations, such as
`g77', to, for example, implement the passing of procedures and even
values in `COMMON' via copy operations into local, perhaps more
efficiently accessed temporaries at entry to a procedure, and, where
appropriate, via copy operations back out to their original locations
in memory at exit from that procedure, without having to take into
consideration the order in which the local copies are updated by the
code, among other things.)

   To test this hypothesis, try compiling your program with the
`-fargument-alias' option, which causes the compiler to revert to
assumptions essentially the same as made by versions of `g77' prior to
0.5.20.

   If the program works using this option, that strongly suggests that
the bug is in your program.  Finding and fixing the bug(s) should
result in a program that is more standard-conforming and that can be
compiled by `g77' in a way that results in a faster executable.

   (You might want to try compiling with `-fargument-noalias', a kind
of half-way point, to see if the problem is limited to aliasing between
dummy arguments and `COMMON' variables--this option assumes that such
aliasing is not done, while still allowing aliasing among dummy
arguments.)

   An example of aliasing that is invalid according to the standards is
shown in the following program, which might *not* produce the expected
results when executed:

     I = 1
     CALL FOO(I, I)
     PRINT *, I
     END
     
     SUBROUTINE FOO(J, K)
     J = J + K
     K = J * K
     PRINT *, J, K
     END

   The above program attempts to use the temporary aliasing of the `J'
and `K' arguments in `FOO' to effect a pathological behavior--the
simultaneous changing of the values of *both* `J' and `K' when either
one of them is written.

   The programmer likely expects the program to print these values:

     2  4
     4

   However, since the program is not standard-conforming, an
implementation's behavior when running it is undefined, because
subroutine `FOO' modifies at least one of the arguments, and they are
aliased with each other.  (Even if one of the assignment statements was
deleted, the program would still violate these rules.  This kind of
on-the-fly aliasing is permitted by the standard only when none of the
aliased items are defined, or written, while the aliasing is in effect.)

   As a practical example, an optimizing compiler might schedule the `J
=' part of the second line of `FOO' *after* the reading of `J' and `K'
for the `J * K' expression, resulting in the following output:

     2  2
     2

   Essentially, compilers are promised (by the standard and, therefore,
by programmers who write code they claim to be standard-conforming)
that if they cannot detect aliasing via static analysis of a single
program unit's `EQUIVALENCE' and `COMMON' statements, no such aliasing
exists.  In such cases, compilers are free to assume that an assignment
to one variable will not change the value of another variable, allowing
it to avoid generating code to re-read the value of the other variable,
to re-schedule reads and writes, and so on, to produce a faster
executable.

   The same promise holds true for arrays (as seen by the called
procedure)--an element of one dummy array cannot be aliased with, or
overlap, any element of another dummy array or be in a `COMMON' area
known to the procedure.

   (These restrictions apply only when the procedure defines, or writes
to, one of the aliased variables or arrays.)

   Unfortunately, there is no way to find *all* possible cases of
violations of the prohibitions against aliasing in Fortran code.
Static analysis is certainly imperfect, as is run-time analysis, since
neither can catch all violations.  (Static analysis can catch all
likely violations, and some that might never actually happen, while
run-time analysis can catch only those violations that actually happen
during a particular run.  Neither approach can cope with programs
mixing Fortran code with routines written in other languages, however.)

   Currently, `g77' provides neither static nor run-time facilities to
detect any cases of this problem, although other products might.
Run-time facilities are more likely to be offered by future versions of
`g77', though patches improving `g77' so that it provides either form
of detection are welcome.


File: g77.info,  Node: Output Assumed To Flush,  Next: Large File Unit Numbers,  Prev: Aliasing Assumed To Work,  Up: Working Programs

Output Assumed To Flush
-----------------------

   For several versions prior to 0.5.20, `g77' configured its version
of the `libf2c' run-time library so that one of its configuration
macros, `ALWAYS_FLUSH', was defined.

   This was done as a result of a belief that many programs expected
output to be flushed to the operating system (under UNIX, via the
`fflush()' library call) with the result that errors, such as disk
full, would be immediately flagged via the relevant `ERR=' and
`IOSTAT=' mechanism.

   Because of the adverse effects this approach had on the performance
of many programs, `g77' no longer configures `libf2c' to always flush
output.

   If your program depends on this behavior, either insert the
appropriate `CALL FLUSH' statements, or modify the sources to the
`libf2c', rebuild and reinstall `g77', and relink your programs with
the modified library.

   (Ideally, `libf2c' would offer the choice at run-time, so that a
compile-time option to `g77' or `f2c' could result in generating the
appropriate calls to flushing or non-flushing library routines.)

   *Note Always Flush Output::, for information on how to modify the
`g77' source tree so that a version of `libf2c' can be built and
installed with the `ALWAYS_FLUSH' macro defined.


File: g77.info,  Node: Large File Unit Numbers,  Prev: Output Assumed To Flush,  Up: Working Programs

Large File Unit Numbers
-----------------------

   If your program crashes at run time with a message including the
text `illegal unit number', that probably is a message from the
run-time library, `libf2c', used, and distributed with, `g77'.

   The message means that your program has attempted to use a file unit
number that is out of the range accepted by `libf2c'.  Normally, this
range is 0 through 99, and the high end of the range is controlled by a
`libf2c' source-file macro named `MXUNIT'.

   If you can easily change your program to use unit numbers in the
range 0 through 99, you should do so.

   Otherwise, see *Note Larger File Unit Numbers::, for information on
how to change `MXUNIT' in `libf2c' so you can build and install a new
version of `libf2c' that supports the larger unit numbers you need.

   *Note:* While `libf2c' places a limit on the range of Fortran
file-unit numbers, the underlying library and operating system might
impose different kinds of limits.  For example, some systems limit the
number of files simultaneously open by a running program.  Information
on how to increase these limits should be found in your system's
documentation.


File: g77.info,  Node: Overly Convenient Options,  Next: Faster Programs,  Prev: Working Programs,  Up: Collected Fortran Wisdom

Overly Convenient Command-line Options
======================================

   These options should be used only as a quick-and-dirty way to
determine how well your program will run under different compilation
models without having to change the source.  Some are more problematic
than others, depending on how portable and maintainable you want the
program to be (and, of course, whether you are allowed to change it at
all is crucial).

   You should not continue to use these command-line options to compile
a given program, but rather should make changes to the source code:

`-finit-local-zero'
     (This option specifies that any uninitialized local variables and
     arrays have default initialization to binary zeros.)

     Many other compilers do this automatically, which means lots of
     Fortran code developed with those compilers depends on it.

     It is safer (and probably would produce a faster program) to find
     the variables and arrays that need such initialization and provide
     it explicitly via `DATA', so that `-finit-local-zero' is not
     needed.

     Consider using `-Wuninitialized' (which requires `-O') to find
     likely candidates, but do not specify `-finit-local-zero' or
     `-fno-automatic', or this technique won't work.

`-fno-automatic'
     (This option specifies that all local variables and arrays are to
     be treated as if they were named in `SAVE' statements.)

     Many other compilers do this automatically, which means lots of
     Fortran code developed with those compilers depends on it.

     The effect of this is that all non-automatic variables and arrays
     are made static, that is, not placed on the stack or in heap
     storage.  This might cause a buggy program to appear to work
     better.  If so, rather than relying on this command-line option
     (and hoping all compilers provide the equivalent one), add `SAVE'
     statements to some or all program unit sources, as appropriate.
     Consider using `-Wuninitialized' (which requires `-O') to find
     likely candidates, but do not specify `-finit-local-zero' or
     `-fno-automatic', or this technique won't work.

     The default is `-fautomatic', which tells `g77' to try and put
     variables and arrays on the stack (or in fast registers) where
     possible and reasonable.  This tends to make programs faster.

     *Note:* Automatic variables and arrays are not affected by this
     option.  These are variables and arrays that are *necessarily*
     automatic, either due to explicit statements, or due to the way
     they are declared.  Examples include local variables and arrays
     not given the `SAVE' attribute in procedures declared `RECURSIVE',
     and local arrays declared with non-constant bounds (automatic
     arrays).  Currently, `g77' supports only automatic arrays, not
     `RECURSIVE' procedures or other means of explicitly specifying
     that variables or arrays are automatic.

`-fugly'
     Fix the source code so that `-fno-ugly' will work.  Note that, for
     many programs, it is difficult to practically avoid using the
     features enabled via `-fugly-init', and these features pose the
     lowest risk of writing nonportable code, among the various "ugly"
     features.

`-fGROUP-intrinsics-hide'
     Change the source code to use `EXTERNAL' for any external procedure
     that might be the name of an intrinsic.  It is easy to find these
     using `-fGROUP-intrinsics-disable'.


File: g77.info,  Node: Faster Programs,  Prev: Overly Convenient Options,  Up: Collected Fortran Wisdom

Faster Programs
===============

   Aside from the usual `gcc' options, such as `-O', `-ffast-math', and
so on, consider trying some of the following approaches to speed up
your program (once you get it working).

* Menu:

* Aligned Data::
* Prefer Automatic Uninitialized Variables::
* Avoid f2c Compatibility::
* Use Submodel Options::


File: g77.info,  Node: Aligned Data,  Next: Prefer Automatic Uninitialized Variables,  Up: Faster Programs

Aligned Data
------------

   On some systems, such as those with Pentium Pro CPUs, programs that
make heavy use of `REAL(KIND=2)' (`DOUBLE PRECISION') might run much
slower than possible due to the compiler not aligning these 64-bit
values to 64-bit boundaries in memory.  (The effect also is present,
though to a lesser extent, on the 586 (Pentium) architecture.)

   The Intel x86 architecture generally ensures that these programs will
work on all its implementations, but particular implementations (such
as Pentium Pro) perform better with more strict alignment.  (Such
behavior isn't unique to the Intel x86 architecture.)  Other
architectures might *demand* 64-bit alignment of 64-bit data.

   There are a variety of approaches to use to address this problem:

   * Order your `COMMON' and `EQUIVALENCE' areas such that the
     variables and arrays with the widest alignment guidelines come
     first.

     For example, on most systems, this would mean placing
     `COMPLEX(KIND=2)', `REAL(KIND=2)', and `INTEGER(KIND=2)' entities
     first, followed by `REAL(KIND=1)', `INTEGER(KIND=1)', and
     `LOGICAL(KIND=1)' entities, then `INTEGER(KIND=6)' entities, and
     finally `CHARACTER' and `INTEGER(KIND=3)' entities.

     The reason to use such placement is it makes it more likely that
     your data will be aligned properly, without requiring you to do
     detailed analysis of each aggregate (`COMMON' and `EQUIVALENCE')
     area.

     Specifically, on systems where the above guidelines are
     appropriate, placing `CHARACTER' entities before `REAL(KIND=2)'
     entities can work just as well, but only if the number of bytes
     occupied by the `CHARACTER' entities is divisible by the
     recommended alignment for `REAL(KIND=2)'.

     By ordering the placement of entities in aggregate areas according
     to the simple guidelines above, you avoid having to carefully
     count the number of bytes occupied by each entity to determine
     whether the actual alignment of each subsequent entity meets the
     alignment guidelines for the type of that entity.

     If you don't ensure correct alignment of `COMMON' elements, the
     compiler may be forced by some systems to violate the Fortran
     semantics by adding padding to get `DOUBLE PRECISION' data
     properly aligned.  If the unfortunate practice is employed of
     overlaying different types of data in the `COMMON' block, the
     different variants of this block may become misaligned with
     respect to each other.  Even if your platform doesn't require
     strict alignment, `COMMON' should be laid out as above for
     portability.  (Unfortunately the FORTRAN 77 standard didn't
     anticipate this possible requirement, which is
     compiler-independent on a given platform.)

   * Use the (x86-specific) `-malign-double' option when compiling
     programs for the Pentium and Pentium Pro architectures (called 586
     and 686 in the `gcc' configuration subsystem).  The warning about
     this in the `gcc' manual isn't generally relevant to Fortran, but
     using it will force `COMMON' to be padded if necessary to align
     `DOUBLE PRECISION' data.

   * Ensure that `crt0.o' or `crt1.o' on your system guarantees a 64-bit
     aligned stack for `main()'.  The recent one from GNU (`glibc2')
     will do this on x86 systems, but we don't know of any other x86
     setups where it will be right.  Read your system's documentation
     to determine if it is appropriate to upgrade to a more recent
     version to obtain the optimal alignment.

   Progress is being made on making this work "out of the box" on
future versions of `g77', `gcc', and some of the relevant operating
systems (such as GNU/Linux).


File: g77.info,  Node: Prefer Automatic Uninitialized Variables,  Next: Avoid f2c Compatibility,  Prev: Aligned Data,  Up: Faster Programs

Prefer Automatic Uninitialized Variables
----------------------------------------

   If you're using `-fno-automatic' already, you probably should change
your code to allow compilation with `-fautomatic' (the default), to
allow the program to run faster.

   Similarly, you should be able to use `-fno-init-local-zero' (the
default) instead of `-finit-local-zero'.  This is because it is rare
that every variable affected by these options in a given program
actually needs to be so affected.

   For example, `-fno-automatic', which effectively `SAVE's every local
non-automatic variable and array, affects even things like `DO'
iteration variables, which rarely need to be `SAVE'd, and this often
reduces run-time performances.  Similarly, `-fno-init-local-zero'
forces such variables to be initialized to zero--when `SAVE'd (such as
when `-fno-automatic'), this by itself generally affects only startup
time for a program, but when not `SAVE'd, it can slow down the
procedure every time it is called.

   *Note Overly Convenient Command-Line Options: Overly Convenient
Options, for information on the `-fno-automatic' and
`-finit-local-zero' options and how to convert their use into selective
changes in your own code.


File: g77.info,  Node: Avoid f2c Compatibility,  Next: Use Submodel Options,  Prev: Prefer Automatic Uninitialized Variables,  Up: Faster Programs

Avoid f2c Compatibility
-----------------------

   If you aren't linking with any code compiled using `f2c', try using
the `-fno-f2c' option when compiling *all* the code in your program.
(Note that `libf2c' is *not* an example of code that is compiled using
`f2c'--it is compiled by a C compiler, typically `gcc'.)


File: g77.info,  Node: Use Submodel Options,  Prev: Avoid f2c Compatibility,  Up: Faster Programs

Use Submodel Options
--------------------

   Using an appropriate `-m' option to generate specific code for your
CPU may be worthwhile, though it may mean the executable won't run on
other versions of the CPU that don't support the same instruction set.
*Note Hardware Models and Configurations: (gcc)Submodel Options.

   For recent CPUs that don't have explicit support in the released
version of `gcc', it may still be possible to get improvements.  For
instance, the flags recommended for 586/686 (Pentium(Pro)) chips for
building the Linux kernel are:

     -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2
     -fomit-frame-pointer

`-fomit-frame-pointer' will, however, inhibit debugging on x86 systems.


File: g77.info,  Node: Trouble,  Next: Open Questions,  Prev: Collected Fortran Wisdom,  Up: Top

Known Causes of Trouble with GNU Fortran
****************************************

   This section describes known problems that affect users of GNU
Fortran.  Most of these are not GNU Fortran bugs per se--if they were,
we would fix them.  But the result for a user might be like the result
of a bug.

   Some of these problems are due to bugs in other software, some are
missing features that are too much work to add, and some are places
where people's opinions differ as to what is best.

   Information on bugs that show up when configuring, porting, building,
or installing `g77' is not provided here.  *Note Problems Installing::.

   To find out about major bugs discovered in the current release and
possible workarounds for them, retrieve `ftp://alpha.gnu.org/g77.plan'.

   (Note that some of this portion of the manual is lifted directly
from the `gcc' manual, with minor modifications to tailor it to users
of `g77'.  Anytime a bug seems to have more to do with the `gcc'
portion of `g77', *Note Known Causes of Trouble with GNU CC:
(gcc)Trouble.)

* Menu:

* But-bugs::         Bugs really in other programs or elsewhere.
* Actual Bugs::      Bugs and misfeatures we will fix later.
* Missing Features:: Features we already know we want to add later.
* Disappointments::  Regrettable things we can't change.
* Non-bugs::         Things we think are right, but some others disagree.
* Warnings and Errors::  Which problems in your code get warnings,
                        and which get errors.


File: g77.info,  Node: But-bugs,  Next: Actual Bugs,  Up: Trouble

Bugs Not In GNU Fortran
=======================

   These are bugs to which the maintainers often have to reply, "but
that isn't a bug in `g77'...".  Some of these already are fixed in new
versions of other software; some still need to be fixed; some are
problems with how `g77' is installed or is being used; some are the
result of bad hardware that causes software to misbehave in sometimes
bizarre ways; some just cannot be addressed at this time until more is
known about the problem.

   Please don't re-report these bugs to the `g77' maintainers--if you
must remind someone how important it is to you that the problem be
fixed, talk to the people responsible for the other products identified
below, but preferably only after you've tried the latest versions of
those products.  The `g77' maintainers have their hands full working on
just fixing and improving `g77', without serving as a clearinghouse for
all bugs that happen to affect `g77' users.

   *Note Collected Fortran Wisdom::, for information on behavior of
Fortran programs, and the programs that compile them, that might be
*thought* to indicate bugs.

* Menu:

* Signal 11 and Friends::  Strange behavior by any software.
* Cannot Link Fortran Programs::  Unresolved references.
* Large Common Blocks::    Problems on older GNU/Linux systems.
* Debugger Problems::      When the debugger crashes.
* NeXTStep Problems::      Misbehaving executables.
* Stack Overflow::         More misbehaving executables.
* Nothing Happens::        Less behaving executables.
* Strange Behavior at Run Time::  Executables misbehaving due to
                            bugs in your program.
* Floating-point Errors::  The results look wrong, but....


File: g77.info,  Node: Signal 11 and Friends,  Next: Cannot Link Fortran Programs,  Up: But-bugs

Signal 11 and Friends
---------------------

   A whole variety of strange behaviors can occur when the software, or
the way you are using the software, stresses the hardware in a way that
triggers hardware bugs.  This might seem hard to believe, but it
happens frequently enough that there exist documents explaining in
detail what the various causes of the problems are, what typical
symptoms look like, and so on.

   Generally these problems are referred to in this document as "signal
11" crashes, because the Linux kernel, running on the most popular
hardware (the Intel x86 line), often stresses the hardware more than
other popular operating systems.  When hardware problems do occur under
GNU/Linux on x86 systems, these often manifest themselves as "signal 11"
problems, as illustrated by the following diagnostic:

     sh# g77 myprog.f
     gcc: Internal compiler error: program f771 got fatal signal 11
     sh#

   It is *very* important to remember that the above message is *not*
the only one that indicates a hardware problem, nor does it always
indicate a hardware problem.

   In particular, on systems other than those running the Linux kernel,
the message might appear somewhat or very different, as it will if the
error manifests itself while running a program other than the `g77'
compiler.  For example, it will appear somewhat different when running
your program, when running Emacs, and so on.

   How to cope with such problems is well beyond the scope of this
manual.

   However, users of Linux-based systems (such as GNU/Linux) should
review `http://www.bitwizard.nl/sig11', a source of detailed
information on diagnosing hardware problems, by recognizing their
common symptoms.

   Users of other operating systems and hardware might find this
reference useful as well.  If you know of similar material for another
hardware/software combination, please let us know so we can consider
including a reference to it in future versions of this manual.


File: g77.info,  Node: Cannot Link Fortran Programs,  Next: Large Common Blocks,  Prev: Signal 11 and Friends,  Up: But-bugs

Cannot Link Fortran Programs
----------------------------

   On some systems, perhaps just those with out-of-date (shared?)
libraries, unresolved-reference errors happen when linking
`g77'-compiled programs (which should be done using `g77').

   If this happens to you, try appending `-lc' to the command you use
to link the program, e.g. `g77 foo.f -lc'.  `g77' already specifies
`-lf2c -lm' when it calls the linker, but it cannot also specify `-lc'
because not all systems have a file named `libc.a'.

   It is unclear at this point whether there are legitimately installed
systems where `-lf2c -lm' is insufficient to resolve code produced by
`g77'.

   If your program doesn't link due to unresolved references to names
like `_main', make sure you're using the `g77' command to do the link,
since this command ensures that the necessary libraries are loaded by
specifying `-lf2c -lm' when it invokes the `gcc' command to do the
actual link.  (Use the `-v' option to discover more about what actually
happens when you use the `g77' and `gcc' commands.)

   Also, try specifying `-lc' as the last item on the `g77' command
line, in case that helps.


File: g77.info,  Node: Large Common Blocks,  Next: Debugger Problems,  Prev: Cannot Link Fortran Programs,  Up: But-bugs

Large Common Blocks
-------------------

   On some older GNU/Linux systems, programs with common blocks larger
than 16MB cannot be linked without some kind of error message being
produced.

   This is a bug in older versions of `ld', fixed in more recent
versions of `binutils', such as version 2.6.


File: g77.info,  Node: Debugger Problems,  Next: NeXTStep Problems,  Prev: Large Common Blocks,  Up: But-bugs

Debugger Problems
-----------------

   There are some known problems when using `gdb' on code compiled by
`g77'.  Inadequate investigation as of the release of 0.5.16 results in
not knowing which products are the culprit, but `gdb-4.14' definitely
crashes when, for example, an attempt is made to print the contents of
a `COMPLEX(KIND=2)' dummy array, on at least some GNU/Linux machines,
plus some others.


File: g77.info,  Node: NeXTStep Problems,  Next: Stack Overflow,  Prev: Debugger Problems,  Up: But-bugs

NeXTStep Problems
-----------------

   Developers of Fortran code on NeXTStep (all architectures) have to
watch out for the following problem when writing programs with large,
statically allocated (i.e. non-stack based) data structures (common
blocks, saved arrays).

   Due to the way the native loader (`/bin/ld') lays out data
structures in virtual memory, it is very easy to create an executable
wherein the `__DATA' segment overlaps (has addresses in common) with
the `UNIX STACK' segment.

   This leads to all sorts of trouble, from the executable simply not
executing, to bus errors.  The NeXTStep command line tool `ebadexec'
points to the problem as follows:

     % /bin/ebadexec a.out
     /bin/ebadexec: __LINKEDIT segment (truncated address = 0x3de000
     rounded size = 0x2a000) of executable file: a.out overlaps with UNIX
     STACK segment (truncated address = 0x400000 rounded size =
     0x3c00000) of executable file: a.out

   (In the above case, it is the `__LINKEDIT' segment that overlaps the
stack segment.)

   This can be cured by assigning the `__DATA' segment (virtual)
addresses beyond the stack segment.  A conservative estimate for this
is from address 6000000 (hexadecimal) onwards--this has always worked
for me [Toon Moene]:

     % g77 -segaddr __DATA 6000000 test.f
     % ebadexec a.out
     ebadexec: file: a.out appears to be executable
     %

   Browsing through `gcc/f/Makefile.in', you will find that the `f771'
program itself also has to be linked with these flags--it has large
statically allocated data structures.  (Version 0.5.18 reduces this
somewhat, but probably not enough.)

   (The above item was contributed by Toon Moene
(<toon@moene.indiv.nluug.nl>).)


File: g77.info,  Node: Stack Overflow,  Next: Nothing Happens,  Prev: NeXTStep Problems,  Up: But-bugs

Stack Overflow
--------------

   `g77' code might fail at runtime (probably with a "segmentation
violation") due to overflowing the stack.  This happens most often on
systems with an environment that provides substantially more heap space
(for use when arbitrarily allocating and freeing memory) than stack
space.

   Often this can be cured by increasing or removing your shell's limit
on stack usage, typically using `limit stacksize' (in `csh' and
derivatives) or `ulimit -s' (in `sh' and derivatives).

   Increasing the allowed stack size might, however, require changing
some operating system or system configuration parameters.

   You might be able to work around the problem by compiling with the
`-fno-automatic' option to reduce stack usage, probably at the expense
of speed.

   *Note Maximum Stackable Size::, for information on patching `g77' to
use different criteria for placing local non-automatic variables and
arrays on the stack.

   However, if your program uses large automatic arrays (for example,
has declarations like `REAL A(N)' where `A' is a local array and `N' is
a dummy or `COMMON' variable that can have a large value), neither use
of `-fno-automatic', nor changing the cut-off point for `g77' for using
the stack, will solve the problem by changing the placement of these
large arrays, as they are *necessarily* automatic.

   `g77' currently provides no means to specify that automatic arrays
are to be allocated on the heap instead of the stack.  So, other than
increasing the stack size, your best bet is to change your source code
to avoid large automatic arrays.  Methods for doing this currently are
outside the scope of this document.

   (*Note:* If your system puts stack and heap space in the same memory
area, such that they are effectively combined, then a stack overflow
probably indicates a program that is either simply too large for the
system, or buggy.)


File: g77.info,  Node: Nothing Happens,  Next: Strange Behavior at Run Time,  Prev: Stack Overflow,  Up: But-bugs

Nothing Happens
---------------

   It is occasionally reported that a "simple" program, such as a
"Hello, World!" program, does nothing when it is run, even though the
compiler reported no errors, despite the program containing nothing
other than a simple `PRINT' statement.

   This most often happens because the program has been compiled and
linked on a UNIX system and named `test', though other names can lead
to similarly unexpected run-time behavior on various systems.

   Essentially this problem boils down to giving your program a name
that is already known to the shell you are using to identify some other
program, which the shell continues to execute instead of your program
when you invoke it via, for example:

     sh# test
     sh#

   Under UNIX and many other system, a simple command name invokes a
searching mechanism that might well not choose the program located in
the current working directory if there is another alternative (such as
the `test' command commonly installed on UNIX systems).

   The reliable way to invoke a program you just linked in the current
directory under UNIX is to specify it using an explicit pathname, as in:

     sh# ./test
      Hello, World!
     sh#

   Users who encounter this problem should take the time to read up on
how their shell searches for commands, how to set their search path,
and so on.  The relevant UNIX commands to learn about include `man',
`info' (on GNU systems), `setenv' (or `set' and `env'), `which', and
`find'.


File: g77.info,  Node: Strange Behavior at Run Time,  Next: Floating-point Errors,  Prev: Nothing Happens,  Up: But-bugs

Strange Behavior at Run Time
----------------------------

   `g77' code might fail at runtime with "segmentation violation", "bus
error", or even something as subtle as a procedure call overwriting a
variable or array element that it is not supposed to touch.

   These can be symptoms of a wide variety of actual bugs that occurred
earlier during the program's run, but manifested themselves as
*visible* problems some time later.

   Overflowing the bounds of an array--usually by writing beyond the
end of it--is one of two kinds of bug that often occurs in Fortran code.

   The other kind of bug is a mismatch between the actual arguments
passed to a procedure and the dummy arguments as declared by that
procedure.

   Both of these kinds of bugs, and some others as well, can be
difficult to track down, because the bug can change its behavior, or
even appear to not occur, when using a debugger.

   That is, these bugs can be quite sensitive to data, including data
representing the placement of other data in memory (that is, pointers,
such as the placement of stack frames in memory).

   Plans call for improving `g77' so that it can offer the ability to
catch and report some of these problems at compile, link, or run time,
such as by generating code to detect references to beyond the bounds of
an array, or checking for agreement between calling and called
procedures.

   In the meantime, finding and fixing the programming bugs that lead
to these behaviors is, ultimately, the user's responsibility, as
difficult as that task can sometimes be.

   One runtime problem that has been observed might have a simple
solution.  If a formatted `WRITE' produces an endless stream of spaces,
check that your program is linked against the correct version of the C
library.  The configuration process takes care to account for your
system's normal `libc' not being ANSI-standard, which will otherwise
cause this behaviour.  If your system's default library is
ANSI-standard and you subsequently link against a non-ANSI one, there
might be problems such as this one.

   Specifically, on Solaris2 systems, avoid picking up the `BSD'
library from `/usr/ucblib'.


File: g77.info,  Node: Floating-point Errors,  Prev: Strange Behavior at Run Time,  Up: But-bugs

Floating-point Errors
---------------------

   Some programs appear to produce inconsistent floating-point results
compiled by `g77' versus by other compilers.

   Often the reason for this behavior is the fact that floating-point
values are represented on almost all Fortran systems by
*approximations*, and these approximations are inexact even for
apparently simple values like 0.1, 0.2, 0.3, 0.4, 0.6, 0.7, 0.8, 0.9,
1.1, and so on.  Most Fortran systems, including all current ports of
`g77', use binary arithmetic to represent these approximations.

   Therefore, the exact value of any floating-point approximation as
manipulated by `g77'-compiled code is representable by adding some
combination of the values 1.0, 0.5, 0.25, 0.125, and so on (just keep
dividing by two) through the precision of the fraction (typically
around 23 bits for `REAL(KIND=1)', 52 for `REAL(KIND=2)'), then
multiplying the sum by a integral power of two (in Fortran, by `2**N')
that typically is between -127 and +128 for `REAL(KIND=1)' and -1023
and +1024 for `REAL(KIND=2)', then multiplying by -1 if the number is
negative.

   So, a value like 0.2 is exactly represented in decimal--since it is
a fraction, `2/10', with a denomenator that is compatible with the base
of the number system (base 10).  However, `2/10' cannot be represented
by any finite number of sums of any of 1.0, 0.5, 0.25, and so on, so
0.2 cannot be exactly represented in binary notation.

   (On the other hand, decimal notation can represent any binary number
in a finite number of digits.  Decimal notation cannot do so with
ternary, or base-3, notation, which would represent floating-point
numbers as sums of any of `1/1', `1/3', `1/9', and so on.  After all,
no finite number of decimal digits can exactly represent `1/3'.
Fortunately, few systems use ternary notation.)

   Moreover, differences in the way run-time I/O libraries convert
between these approximations and the decimal representation often used
by programmers and the programs they write can result in apparent
differences between results that do not actually exist, or exist to
such a small degree that they usually are not worth worrying about.

   For example, consider the following program:

     PRINT *, 0.2
     END

   When compiled by `g77', the above program might output `0.20000003',
while another compiler might produce a executable that outputs `0.2'.

   This particular difference is due to the fact that, currently,
conversion of floating-point values by the `libf2c' library, used by
`g77', handles only double-precision values.

   Since `0.2' in the program is a single-precision value, it is
converted to double precision (still in binary notation) before being
converted back to decimal.  The conversion to binary appends _binary_
zero digits to the original value--which, again, is an inexact
approximation of 0.2--resulting in an approximation that is much less
exact than is connoted by the use of double precision.

   (The appending of binary zero digits has essentially the same effect
as taking a particular decimal approximation of `1/3', such as
`0.3333333', and appending decimal zeros to it, producing
`0.33333330000000000'.  Treating the resulting decimal approximation as
if it really had 18 or so digits of valid precision would make it seem
a very poor approximation of `1/3'.)

   As a result of converting the single-precision approximation to
double precision by appending binary zeros, the conversion of the
resulting double-precision value to decimal produces what looks like an
incorrect result, when in fact the result is *inexact*, and is probably
no less inaccurate or imprecise an approximation of 0.2 than is
produced by other compilers that happen to output the converted value
as "exactly" `0.2'.  (Some compilers behave in a way that can make them
appear to retain more accuracy across a conversion of a single-precision
constant to double precision.  *Note Context-Sensitive Constants::, to
see why this practice is illusory and even dangerous.)

   Note that a more exact approximation of the constant is computed
when the program is changed to specify a double-precision constant:

     PRINT *, 0.2D0
     END

   Future versions of `g77' and/or `libf2c' might convert
single-precision values directly to decimal, instead of converting them
to double precision first.  This would tend to result in output that is
more consistent with that produced by some other Fortran
implementations.


File: g77.info,  Node: Actual Bugs,  Next: Missing Features,  Prev: But-bugs,  Up: Trouble

Actual Bugs We Haven't Fixed Yet
================================

   This section identifies bugs that `g77' *users* might run into.
This includes bugs that are actually in the `gcc' back end (GBE) or in
`libf2c', because those sets of code are at least somewhat under the
control of (and necessarily intertwined with) `g77', so it isn't worth
separating them out.

   For information on bugs that might afflict people who configure,
port, build, and install `g77', *Note Problems Installing::.

   * `g77''s version of `gcc', and probably `g77' itself, cannot be
     reliably used with the `-O2' option (or higher) on Digital
     Semiconductor Alpha AXP machines.  The problem is most immediately
     noticed in differences discovered by `make compare' following a
     bootstrap build using `-O2'.  It also manifests itself as a
     failure to compile `DATA' statements such as `DATA R/7./'
     correctly; in this case, `R' might be initialized to `4.0'.

     Until this bug is fixed, use only `-O1' or no optimization.

   * Something about `g77''s straightforward handling of label
     references and definitions sometimes prevents the GBE from
     unrolling loops.  Until this is solved, try inserting or removing
     `CONTINUE' statements as the terminal statement, using the `END DO'
     form instead, and so on.  (Probably improved, but not wholly
     fixed, in 0.5.21.)

   * The `g77' command itself should more faithfully process options
     the way the `gcc' command does.  For example, `gcc' accepts
     abbreviated forms of long options, `g77' generally doesn't.

   * Some confusion in diagnostics concerning failing `INCLUDE'
     statements from within `INCLUDE''d or `#include''d files.

   * `g77' assumes that `INTEGER(KIND=1)' constants range from `-2**31'
     to `2**31-1' (the range for two's-complement 32-bit values),
     instead of determining their range from the actual range of the
     type for the configuration (and, someday, for the constant).

     Further, it generally doesn't implement the handling of constants
     very well in that it makes assumptions about the configuration
     that it no longer makes regarding variables (types).

     Included with this item is the fact that `g77' doesn't recognize
     that, on IEEE-754/854-compliant systems, `0./0.' should produce a
     NaN and no warning instead of the value `0.' and a warning.  This
     is to be fixed in version 0.6, when `g77' will use the `gcc' back
     end's constant-handling mechanisms to replace its own.

   * `g77' uses way too much memory and CPU time to process large
     aggregate areas having any initialized elements.

     For example, `REAL A(1000000)' followed by `DATA A(1)/1/' takes up
     way too much time and space, including the size of the generated
     assembler file.  This is to be mitigated somewhat in version 0.6.

     Version 0.5.18 improves cases like this--specifically, cases of
     *sparse* initialization that leave large, contiguous areas
     uninitialized--significantly.  However, even with the
     improvements, these cases still require too much memory and CPU
     time.

     (Version 0.5.18 also improves cases where the initial values are
     zero to a much greater degree, so if the above example ends with
     `DATA A(1)/0/', the compile-time performance will be about as good
     as it will ever get, aside from unrelated improvements to the
     compiler.)

     Note that `g77' does display a warning message to notify the user
     before the compiler appears to hang.  *Note Initialization of
     Large Aggregate Areas: Large Initialization, for information on
     how to change the point at which `g77' decides to issue this
     warning.

   * `g77' doesn't emit variable and array members of common blocks for
     use with a debugger (the `-g' command-line option).  The code is
     present to do this, but doesn't work with at least one debug
     format--perhaps it works with others.  And it turns out there's a
     similar bug for local equivalence areas, so that has been disabled
     as well.

     As of Version 0.5.19, a temporary kludge solution is provided
     whereby some rudimentary information on a member is written as a
     string that is the member's value as a character string.

     *Note Options for Code Generation Conventions: Code Gen Options,
     for information on the `-fdebug-kludge' option.

   * When debugging, after starting up the debugger but before being
     able to see the source code for the main program unit, the user
     must currently set a breakpoint at `MAIN__' (or `MAIN___' or
     `MAIN_' if `MAIN__' doesn't exist) and run the program until it
     hits the breakpoint.  At that point, the main program unit is
     activated and about to execute its first executable statement, but
     that's the state in which the debugger should start up, as is the
     case for languages like C.

   * Debugging `g77'-compiled code using debuggers other than `gdb' is
     likely not to work.

     Getting `g77' and `gdb' to work together is a known
     problem--getting `g77' to work properly with other debuggers, for
     which source code often is unavailable to `g77' developers, seems
     like a much larger, unknown problem, and is a lower priority than
     making `g77' and `gdb' work together properly.

     On the other hand, information about problems other debuggers have
     with `g77' output might make it easier to properly fix `g77', and
     perhaps even improve `gdb', so it is definitely welcome.  Such
     information might even lead to all relevant products working
     together properly sooner.

   * `g77' currently inserts needless padding for things like `COMMON
     A,IPAD' where `A' is `CHARACTER*1' and `IPAD' is `INTEGER(KIND=1)'
     on machines like x86, because the back end insists that `IPAD' be
     aligned to a 4-byte boundary, but the processor has no such
     requirement (though it's good for performance).

     It is possible that this is not a real bug, and could be considered
     a performance feature, but it might be important to provide the
     ability to Fortran code to specify minimum padding for aggregate
     areas such as common blocks--and, certainly, there is the
     potential, with the current setup, for interface differences in
     the way such areas are laid out between `g77' and other compilers.

   * `g77' doesn't work perfectly on 64-bit configurations such as the
     Alpha.  This problem is expected to be largely resolved as of
     version 0.5.20, and further addressed by 0.5.21.  Version 0.6
     should solve most or all related problems (such as 64-bit machines
     other than Digital Semiconductor ("DEC") Alphas).

     One known bug that causes a compile-time crash occurs when
     compiling code such as the following with optimization:

          SUBROUTINE CRASH (TEMP)
          INTEGER*2 HALF(2)
          REAL TEMP
          HALF(1) = NINT (TEMP)
          END

     It is expected that a future version of `g77' will have a fix for
     this problem, almost certainly by the time `g77' supports the
     forthcoming version 2.8.0 of `gcc'.

   * Maintainers of gcc report that the back end definitely has "broken"
     support for `COMPLEX' types.  Based on their input, it seems many
     of the problems affect only the more-general facilities for gcc's
     `__complex__' type, such as `__complex__ int' (where the real and
     imaginary parts are integers) that GNU Fortran does not use.

     Version 0.5.20 of `g77' works around this problem by not using the
     back end's support for `COMPLEX'.  The new option
     `-fno-emulate-complex' avoids the work-around, reverting to using
     the same "broken" mechanism as that used by versions of `g77'
     prior to 0.5.20.

   * There seem to be some problems with passing constants, and perhaps
     general expressions (other than simple variables/arrays), to
     procedures when compiling on some systems (such as i386) with
     `-fPIC', as in when compiling for ELF targets.  The symptom is
     that the assembler complains about invalid opcodes.  This bug is
     in the gcc back end, and it apparently occurs only when compiling
     sufficiently complicated functions *without* the `-O' option.


File: g77.info,  Node: Missing Features,  Next: Disappointments,  Prev: Actual Bugs,  Up: Trouble

Missing Features
================

   This section lists features we know are missing from `g77', and
which we want to add someday.  (There is no priority implied in the
ordering below.)

* Menu:

GNU Fortran language:
* Better Source Model::
* Fortran 90 Support::
* Intrinsics in PARAMETER Statements::
* SELECT CASE on CHARACTER Type::
* RECURSIVE Keyword::
* Popular Non-standard Types::
* Full Support for Compiler Types::
* Array Bounds Expressions::
* POINTER Statements::
* Sensible Non-standard Constructs::
* FLUSH Statement::
* Expressions in FORMAT Statements::
* Explicit Assembler Code::
* Q Edit Descriptor::

GNU Fortran dialects:
* Old-style PARAMETER Statements::
* TYPE and ACCEPT I/O Statements::
* STRUCTURE UNION RECORD MAP::
* OPEN CLOSE and INQUIRE Keywords::
* ENCODE and DECODE::
* Suppressing Space Padding::
* Fortran Preprocessor::
* Bit Operations on Floating-point Data::

New facilities:
* POSIX Standard::
* Floating-point Exception Handling::
* Nonportable Conversions::
* Large Automatic Arrays::
* Support for Threads::
* Increasing Precision/Range::

Better diagnostics:
* Gracefully Handle Sensible Bad Code::
* Non-standard Conversions::
* Non-standard Intrinsics::
* Modifying DO Variable::
* Better Pedantic Compilation::
* Warn About Implicit Conversions::
* Invalid Use of Hollerith Constant::
* Dummy Array Without Dimensioning Dummy::
* Invalid FORMAT Specifiers::
* Ambiguous Dialects::
* Unused Labels::
* Informational Messages::

Run-time facilities:
* Uninitialized Variables at Run Time::
* Bounds Checking at Run Time::

Debugging:
* Labels Visible to Debugger::


File: g77.info,  Node: Better Source Model,  Next: Fortran 90 Support,  Up: Missing Features

Better Source Model
-------------------

   `g77' needs to provide, as the default source-line model, a "pure
visual" mode, where the interpretation of a source program in this mode
can be accurately determined by a user looking at a traditionally
displayed rendition of the program (assuming the user knows whether the
program is fixed or free form).

   The design should assume the user cannot tell tabs from spaces and
cannot see trailing spaces on lines, but has canonical tab stops and,
for fixed-form source, has the ability to always know exactly where
column 72 is (since the Fortran standard itself requires this for
fixed-form source).

   This would change the default treatment of fixed-form source to not
treat lines with tabs as if they were infinitely long--instead, they
would end at column 72 just as if the tabs were replaced by spaces in
the canonical way.

   As part of this, provide common alternate models (Digital, `f2c',
and so on) via command-line options.  This includes allowing
arbitrarily long lines for free-form source as well as fixed-form
source and providing various limits and diagnostics as appropriate.

   Also, `g77' should offer, perhaps even default to, warnings when
characters beyond the last valid column are anything other than spaces.
This would mean code with "sequence numbers" in columns 73 through 80
would be rejected, and there's a lot of that kind of code around, but
one of the most frequent bugs encountered by new users is accidentally
writing fixed-form source code into and beyond column 73.  So, maybe
the users of old code would be able to more easily handle having to
specify, say, a `-Wno-col73to80' option.


File: g77.info,  Node: Fortran 90 Support,  Next: Intrinsics in PARAMETER Statements,  Prev: Better Source Model,  Up: Missing Features

Fortran 90 Support
------------------

   `g77' does not support many of the features that distinguish Fortran
90 (and, now, Fortran 95) from ANSI FORTRAN 77.

   Some Fortran 90 features are supported, because they make sense to
offer even to die-hard users of F77.  For example, many of them codify
various ways F77 has been extended to meet users' needs during its
tenure, so `g77' might as well offer them as the primary way to meet
those same needs, even if it offers compatibility with one or more of
the ways those needs were met by other F77 compilers in the industry.

   Still, many important F90 features are not supported, because no
attempt has been made to research each and every feature and assess its
viability in `g77'.  In the meantime, users who need those features must
use Fortran 90 compilers anyway, and the best approach to adding some
F90 features to GNU Fortran might well be to fund a comprehensive
project to create GNU Fortran 95.


File: g77.info,  Node: Intrinsics in PARAMETER Statements,  Next: SELECT CASE on CHARACTER Type,  Prev: Fortran 90 Support,  Up: Missing Features

Intrinsics in `PARAMETER' Statements
------------------------------------

   `g77' doesn't allow intrinsics in `PARAMETER' statements.  This
feature is considered to be absolutely vital, even though it is not
standard-conforming, and is scheduled for version 0.6.

   Related to this, `g77' doesn't allow non-integral exponentiation in
`PARAMETER' statements, such as `PARAMETER (R=2**.25)'.  It is unlikely
`g77' will ever support this feature, as doing it properly requires
complete emulation of a target computer's floating-point facilities when
building `g77' as a cross-compiler.  But, if the `gcc' back end is
enhanced to provide such a facility, `g77' will likely use that facility
in implementing this feature soon afterwards.


File: g77.info,  Node: SELECT CASE on CHARACTER Type,  Next: RECURSIVE Keyword,  Prev: Intrinsics in PARAMETER Statements,  Up: Missing Features

`SELECT CASE' on `CHARACTER' Type
---------------------------------

   Character-type selector/cases for `SELECT CASE' currently are not
supported.


File: g77.info,  Node: RECURSIVE Keyword,  Next: Popular Non-standard Types,  Prev: SELECT CASE on CHARACTER Type,  Up: Missing Features

`RECURSIVE' Keyword
-------------------

   `g77' doesn't support the `RECURSIVE' keyword that F90 compilers do.
Nor does it provide any means for compiling procedures designed to do
recursion.

   All recursive code can be rewritten to not use recursion, but the
result is not pretty.


File: g77.info,  Node: Increasing Precision/Range,  Next: Gracefully Handle Sensible Bad Code,  Prev: Support for Threads,  Up: Missing Features

Increasing Precision/Range
--------------------------

   Some compilers, such as `f2c', have an option (`-r8' or similar)
that provides automatic treatment of `REAL' entities such that they
have twice the storage size, and a corresponding increase in the range
and precision, of what would normally be the `REAL(KIND=1)' (default
`REAL') type.  (This affects `COMPLEX' the same way.)

   They also typically offer another option (`-i8') to increase
`INTEGER' entities so they are twice as large (with roughly twice as
much range).

   (There are potential pitfalls in using these options.)

   `g77' does not yet offer any option that performs these kinds of
transformations.  Part of the problem is the lack of detailed
specifications regarding exactly how these options affect the
interpretation of constants, intrinsics, and so on.

   Until `g77' addresses this need, programmers could improve the
portability of their code by modifying it to not require compile-time
options to produce correct results.  Some free tools are available
which may help, specifically in Toolpack (which one would expect to be
sound) and the `fortran' section of the Netlib repository.

   Use of preprocessors can provide a fairly portable means to work
around the lack of widely portable methods in the Fortran language
itself (though increasing acceptance of Fortran 90 would alleviate this
problem).


File: g77.info,  Node: Popular Non-standard Types,  Next: Full Support for Compiler Types,  Prev: RECURSIVE Keyword,  Up: Missing Features

Popular Non-standard Types
--------------------------

   `g77' doesn't fully support `INTEGER*2', `LOGICAL*1', and similar.
Version 0.6 will provide full support for this very popular set of
features.  In the meantime, version 0.5.18 provides rudimentary support
for them.


File: g77.info,  Node: Full Support for Compiler Types,  Next: Array Bounds Expressions,  Prev: Popular Non-standard Types,  Up: Missing Features

Full Support for Compiler Types
-------------------------------

   `g77' doesn't support `INTEGER', `REAL', and `COMPLEX' equivalents
for *all* applicable back-end-supported types (`char', `short int',
`int', `long int', `long long int', and `long double').  This means
providing intrinsic support, and maybe constant support (using F90
syntax) as well, and, for most machines will result in automatic
support of `INTEGER*1', `INTEGER*2', `INTEGER*8', maybe even `REAL*16',
and so on.  This is scheduled for version 0.6.


File: g77.info,  Node: Array Bounds Expressions,  Next: POINTER Statements,  Prev: Full Support for Compiler Types,  Up: Missing Features

Array Bounds Expressions
------------------------

   `g77' doesn't support more general expressions to dimension arrays,
such as array element references, function references, etc.

   For example, `g77' currently does not accept the following:

     SUBROUTINE X(M, N)
     INTEGER N(10), M(N(2), N(1))


File: g77.info,  Node: POINTER Statements,  Next: Sensible Non-standard Constructs,  Prev: Array Bounds Expressions,  Up: Missing Features

POINTER Statements
------------------

   `g77' doesn't support pointers or allocatable objects (other than
automatic arrays).  This set of features is probably considered just
behind intrinsics in `PARAMETER' statements on the list of large,
important things to add to `g77'.

   In the meantime, consider using the `INTEGER(KIND=7)' declaration to
specify that a variable must be able to hold a pointer.  This construct
is not portable to other non-GNU compilers, but it is portable to all
machines GNU Fortran supports when `g77' is used.

   *Note Functions and Subroutines::, for information on `%VAL()',
`%REF()', and `%DESCR()' constructs, which are useful for passing
pointers to procedures written in languages other than Fortran.


File: g77.info,  Node: Sensible Non-standard Constructs,  Next: FLUSH Statement,  Prev: POINTER Statements,  Up: Missing Features

Sensible Non-standard Constructs
--------------------------------

   `g77' rejects things other compilers accept, like `INTRINSIC
SQRT,SQRT'.  As time permits in the future, some of these things that
are easy for humans to read and write and unlikely to be intended to
mean something else will be accepted by `g77' (though `-fpedantic'
should trigger warnings about such non-standard constructs).

   Until `g77' no longer gratuitously rejects sensible code, you might
as well fix your code to be more standard-conforming and portable.

   The kind of case that is important to except from the recommendation
to change your code is one where following good coding rules would
force you to write non-standard code that nevertheless has a clear
meaning.

   For example, when writing an `INCLUDE' file that defines a common
block, it might be appropriate to include a `SAVE' statement for the
common block (such as `SAVE /CBLOCK/'), so that variables defined in
the common block retain their values even when all procedures declaring
the common block become inactive (return to their callers).

   However, putting `SAVE' statements in an `INCLUDE' file would
prevent otherwise standard-conforming code from also specifying the
`SAVE' statement, by itself, to indicate that all local variables and
arrays are to have the `SAVE' attribute.

   For this reason, `g77' already has been changed to allow this
combination, because although the general problem of gratuitously
rejecting unambiguous and "safe" constructs still exists in `g77', this
particular construct was deemed useful enough that it was worth fixing
`g77' for just this case.

   So, while there is no need to change your code to avoid using this
particular construct, there might be other, equally appropriate but
non-standard constructs, that you shouldn't have to stop using just
because `g77' (or any other compiler) gratuitously rejects it.

   Until the general problem is solved, if you have any such construct
you believe is worthwhile using (e.g. not just an arbitrary, redundant
specification of an attribute), please submit a bug report with an
explanation, so we can consider fixing `g77' just for cases like yours.


File: g77.info,  Node: FLUSH Statement,  Next: Expressions in FORMAT Statements,  Prev: Sensible Non-standard Constructs,  Up: Missing Features

`FLUSH' Statement
-----------------

   `g77' could perhaps use a `FLUSH' statement that does what `CALL
FLUSH' does, but that supports `*' as the unit designator (same unit as
for `PRINT') and accepts `ERR=' and/or `IOSTAT=' specifiers.


File: g77.info,  Node: Expressions in FORMAT Statements,  Next: Explicit Assembler Code,  Prev: FLUSH Statement,  Up: Missing Features

Expressions in `FORMAT' Statements
----------------------------------

   `g77' doesn't support `FORMAT(I<J>)' and the like.  Supporting this
requires a significant redesign or replacement of `libf2c'.

   However, `g77' does support this construct when the expression is
constant (as of version 0.5.22).  For example:

           PARAMETER (IWIDTH = 12)
     10    FORMAT (I<IWIDTH>)

   Otherwise, at least for output (`PRINT' and `WRITE'), Fortran code
making use of this feature can be rewritten to avoid it by constructing
the `FORMAT' string in a `CHARACTER' variable or array, then using that
variable or array in place of the `FORMAT' statement label to do the
original `PRINT' or `WRITE'.

   Many uses of this feature on input can be rewritten this way as
well, but not all can.  For example, this can be rewritten:

           READ 20, I
     20    FORMAT (I<J>)

   However, this cannot, in general, be rewritten, especially when
`ERR=' and `END=' constructs are employed:

           READ 30, J, I
     30    FORMAT (I<J>)


File: g77.info,  Node: Explicit Assembler Code,  Next: Q Edit Descriptor,  Prev: Expressions in FORMAT Statements,  Up: Missing Features

Explicit Assembler Code
-----------------------

   `g77' needs to provide some way, a la `gcc', for `g77' code to
specify explicit assembler code.


File: g77.info,  Node: Q Edit Descriptor,  Next: Old-style PARAMETER Statements,  Prev: Explicit Assembler Code,  Up: Missing Features

Q Edit Descriptor
-----------------

   The `Q' edit descriptor in `FORMAT's isn't supported.  (This is
meant to get the number of characters remaining in an input record.)
Supporting this requires a significant redesign or replacement of
`libf2c'.

   A workaround might be using internal I/O or the stream-based
intrinsics.  *Note FGetC Intrinsic (subroutine)::.


File: g77.info,  Node: Old-style PARAMETER Statements,  Next: TYPE and ACCEPT I/O Statements,  Prev: Q Edit Descriptor,  Up: Missing Features

Old-style PARAMETER Statements
------------------------------

   `g77' doesn't accept `PARAMETER I=1'.  Supporting this obsolete form
of the `PARAMETER' statement would not be particularly hard, as most of
the parsing code is already in place and working.

   Until time/money is spent implementing it, you might as well fix
your code to use the standard form, `PARAMETER (I=1)' (possibly needing
`INTEGER I' preceding the `PARAMETER' statement as well, otherwise, in
the obsolete form of `PARAMETER', the type of the variable is set from
the type of the constant being assigned to it).


File: g77.info,  Node: TYPE and ACCEPT I/O Statements,  Next: STRUCTURE UNION RECORD MAP,  Prev: Old-style PARAMETER Statements,  Up: Missing Features

`TYPE' and `ACCEPT' I/O Statements
----------------------------------

   `g77' doesn't support the I/O statements `TYPE' and `ACCEPT'.  These
are common extensions that should be easy to support, but also are
fairly easy to work around in user code.

   Generally, any `TYPE fmt,list' I/O statement can be replaced by
`PRINT fmt,list'.  And, any `ACCEPT fmt,list' statement can be replaced
by `READ fmt,list'.


File: g77.info,  Node: STRUCTURE UNION RECORD MAP,  Next: OPEN CLOSE and INQUIRE Keywords,  Prev: TYPE and ACCEPT I/O Statements,  Up: Missing Features

`STRUCTURE', `UNION', `RECORD', `MAP'
-------------------------------------

   `g77' doesn't support `STRUCTURE', `UNION', `RECORD', `MAP'.  This
set of extensions is quite a bit lower on the list of large, important
things to add to `g77', partly because it requires a great deal of work
either upgrading or replacing `libf2c'.


File: g77.info,  Node: OPEN CLOSE and INQUIRE Keywords,  Next: ENCODE and DECODE,  Prev: STRUCTURE UNION RECORD MAP,  Up: Missing Features

`OPEN', `CLOSE', and `INQUIRE' Keywords
---------------------------------------

   `g77' doesn't have support for keywords such as `DISP='DELETE'' in
the `OPEN', `CLOSE', and `INQUIRE' statements.  These extensions are
easy to add to `g77' itself, but require much more work on `libf2c'.


File: g77.info,  Node: ENCODE and DECODE,  Next: Suppressing Space Padding,  Prev: OPEN CLOSE and INQUIRE Keywords,  Up: Missing Features

`ENCODE' and `DECODE'
---------------------

   `g77' doesn't support `ENCODE' or `DECODE'.

   These statements are best replaced by READ and WRITE statements
involving internal files (CHARACTER variables and arrays).

   For example, replace a code fragment like

           INTEGER*1 LINE(80)
     ...
           DECODE (80, 9000, LINE) A, B, C
     ...
     9000  FORMAT (1X, 3(F10.5))

with:

           CHARACTER*80 LINE
     ...
           READ (UNIT=LINE, FMT=9000) A, B, C
     ...
     9000  FORMAT (1X, 3(F10.5))

   Similarly, replace a code fragment like

           INTEGER*1 LINE(80)
     ...
           ENCODE (80, 9000, LINE) A, B, C
     ...
     9000  FORMAT (1X, 'OUTPUT IS ', 3(F10.5))

with:

           CHARACTER*80 LINE
     ...
           WRITE (UNIT=LINE, FMT=9000) A, B, C
     ...
     9000  FORMAT (1X, 'OUTPUT IS ', 3(F10.5))

   It is entirely possible that `ENCODE' and `DECODE' will be supported
by a future version of `g77'.


File: g77.info,  Node: Suppressing Space Padding,  Next: Fortran Preprocessor,  Prev: ENCODE and DECODE,  Up: Missing Features

Suppressing Space Padding of Source Lines
-----------------------------------------

   `g77' should offer VXT-Fortran-style suppression of virtual spaces
at the end of a source line if an appropriate command-line option is
specified.

   This affects cases where a character constant is continued onto the
next line in a fixed-form source file, as in the following example:

     10    PRINT *,'HOW MANY
          1 SPACES?'

`g77', and many other compilers, virtually extend the continued line
through column 72 with spaces that become part of the character
constant, but Digital Fortran normally didn't, leaving only one space
between `MANY' and `SPACES?'  in the output of the above statement.

   Fairly recently, at least one version of Digital Fortran was
enhanced to provide the other behavior when a command-line option is
specified, apparently due to demand from readers of the USENET group
`comp.lang.fortran' to offer conformance to this widespread practice in
the industry.  `g77' should return the favor by offering conformance to
Digital's approach to handling the above example.


File: g77.info,  Node: Fortran Preprocessor,  Next: Bit Operations on Floating-point Data,  Prev: Suppressing Space Padding,  Up: Missing Features

Fortran Preprocessor
--------------------

   `g77' should offer a preprocessor designed specifically for Fortran
to replace `cpp -traditional'.  There are several out there worth
evaluating, at least.

   Such a preprocessor would recognize Hollerith constants, properly
parse comments and character constants, and so on.  It might also
recognize, process, and thus preprocess files included via the
`INCLUDE' directive.


File: g77.info,  Node: Bit Operations on Floating-point Data,  Next: POSIX Standard,  Prev: Fortran Preprocessor,  Up: Missing Features

Bit Operations on Floating-point Data
-------------------------------------

   `g77' does not allow `REAL' and other non-integral types for
arguments to intrinsics like `AND', `OR', and `SHIFT'.

   For example, this program is rejected by `g77', because the
intrinsic `IAND' does not accept `REAL' arguments:

     DATA A/7.54/, B/9.112/
     PRINT *, IAND(A, B)
     END


File: g77.info,  Node: POSIX Standard,  Next: Floating-point Exception Handling,  Prev: Bit Operations on Floating-point Data,  Up: Missing Features

`POSIX' Standard
----------------

   `g77' should support the POSIX standard for Fortran.


File: g77.info,  Node: Floating-point Exception Handling,  Next: Nonportable Conversions,  Prev: POSIX Standard,  Up: Missing Features

Floating-point Exception Handling
---------------------------------

   The `gcc' backend and, consequently, `g77', currently provides no
control over whether or not floating-point exceptions are trapped or
ignored.  (Ignoring them typically results in NaN values being
propagated in systems that conform to IEEE 754.)  The behaviour is
inherited from the system-dependent startup code.

   Most systems provide some C-callable mechanism to change this; this
can be invoked at startup using `gcc''s `constructor' attribute.  For
example, just compiling and linking the following C code with your
program will turn on exception trapping for the "common" exceptions on
an x86-based GNU system:

     #include <fpu_control.h>
     void __attribute__ ((constructor))
     trapfpe () {
       (void) __setfpucw (_FPU_DEFAULT &
                          ~(_FPU_MASK_IM | _FPU_MASK_ZM | _FPU_MASK_OM));
     }


File: g77.info,  Node: Nonportable Conversions,  Next: Large Automatic Arrays,  Prev: Floating-point Exception Handling,  Up: Missing Features

Nonportable Conversions
-----------------------

   `g77' doesn't accept some particularly nonportable, silent data-type
conversions such as `LOGICAL' to `REAL' (as in `A=.FALSE.', where `A'
is type `REAL'), that other compilers might quietly accept.

   Some of these conversions are accepted by `g77' when the `-fugly'
option is specified.  Perhaps it should accept more or all of them.


File: g77.info,  Node: Large Automatic Arrays,  Next: Support for Threads,  Prev: Nonportable Conversions,  Up: Missing Features

Large Automatic Arrays
----------------------

   Currently, automatic arrays always are allocated on the stack.  For
situations where the stack cannot be made large enough, `g77' should
offer a compiler option that specifies allocation of automatic arrays
in heap storage.


File: g77.info,  Node: Support for Threads,  Next: Increasing Precision/Range,  Prev: Large Automatic Arrays,  Up: Missing Features

Support for Threads
-------------------

   Neither the code produced by `g77' nor the `libf2c' library are
thread-safe, nor does `g77' have support for parallel processing (other
than the instruction-level parallelism available on some processors).
A package such as PVM might help here.


File: g77.info,  Node: Gracefully Handle Sensible Bad Code,  Next: Non-standard Conversions,  Prev: Increasing Precision/Range,  Up: Missing Features

Gracefully Handle Sensible Bad Code
-----------------------------------

   `g77' generally should continue processing for warnings and
recoverable (user) errors whenever possible--that is, it shouldn't
gratuitously make bad or useless code.

   For example:

     INTRINSIC ZABS
     CALL FOO(ZABS)
     END

When compiling the above with `-ff2c-intrinsics-disable', `g77' should
indeed complain about passing `ZABS', but it still should compile,
instead of rejecting the entire `CALL' statement.  (Some of this is
related to improving the compiler internals to improve how statements
are analyzed.)


File: g77.info,  Node: Non-standard Conversions,  Next: Non-standard Intrinsics,  Prev: Gracefully Handle Sensible Bad Code,  Up: Missing Features

Non-standard Conversions
------------------------

   `-Wconversion' and related should flag places where non-standard
conversions are found.  Perhaps much of this would be part of `-Wugly*'.


File: g77.info,  Node: Non-standard Intrinsics,  Next: Modifying DO Variable,  Prev: Non-standard Conversions,  Up: Missing Features

Non-standard Intrinsics
-----------------------

   `g77' needs a new option, like `-Wintrinsics', to warn about use of
non-standard intrinsics without explicit `INTRINSIC' statements for
them.  This would help find code that might fail silently when ported
to another compiler.


File: g77.info,  Node: Modifying DO Variable,  Next: Better Pedantic Compilation,  Prev: Non-standard Intrinsics,  Up: Missing Features

Modifying `DO' Variable
-----------------------

   `g77' should warn about modifying `DO' variables via `EQUIVALENCE'.
(The internal information gathered to produce this warning might also
be useful in setting the internal "doiter" flag for a variable or even
array reference within a loop, since that might produce faster code
someday.)

   For example, this code is invalid, so `g77' should warn about the
invalid assignment to `NOTHER':

     EQUIVALENCE (I, NOTHER)
     DO I = 1, 100
        IF (I.EQ. 10) NOTHER = 20
     END DO


File: g77.info,  Node: Better Pedantic Compilation,  Next: Warn About Implicit Conversions,  Prev: Modifying DO Variable,  Up: Missing Features

Better Pedantic Compilation
---------------------------

   `g77' needs to support `-fpedantic' more thoroughly, and use it only
to generate warnings instead of rejecting constructs outright.  Have it
warn: if a variable that dimensions an array is not a dummy or placed
explicitly in `COMMON' (F77 does not allow it to be placed in `COMMON'
via `EQUIVALENCE'); if specification statements follow
statement-function-definition statements; about all sorts of syntactic
extensions.


File: g77.info,  Node: Warn About Implicit Conversions,  Next: Invalid Use of Hollerith Constant,  Prev: Better Pedantic Compilation,  Up: Missing Features

Warn About Implicit Conversions
-------------------------------

   `g77' needs a `-Wpromotions' option to warn if source code appears
to expect automatic, silent, and somewhat dangerous compiler-assisted
conversion of `REAL(KIND=1)' constants to `REAL(KIND=2)' based on
context.

   For example, it would warn about cases like this:

     DOUBLE PRECISION FOO
     PARAMETER (TZPHI = 9.435784839284958)
     FOO = TZPHI * 3D0


File: g77.info,  Node: Invalid Use of Hollerith Constant,  Next: Dummy Array Without Dimensioning Dummy,  Prev: Warn About Implicit Conversions,  Up: Missing Features

Invalid Use of Hollerith Constant
---------------------------------

   `g77' should disallow statements like `RETURN 2HAB', which are
invalid in both source forms (unlike `RETURN (2HAB)', which probably
still makes no sense but at least can be reliably parsed).  Fixed-form
processing rejects it, but not free-form, except in a way that is a bit
difficult to understand.


File: g77.info,  Node: Dummy Array Without Dimensioning Dummy,  Next: Invalid FORMAT Specifiers,  Prev: Invalid Use of Hollerith Constant,  Up: Missing Features

Dummy Array Without Dimensioning Dummy
--------------------------------------

   `g77' should complain when a list of dummy arguments containing an
adjustable dummy array does not also contain every variable listed in
the dimension list of the adjustable array.

   Currently, `g77' does complain about a variable that dimensions an
array but doesn't appear in any dummy list or `COMMON' area, but this
needs to be extended to catch cases where it doesn't appear in every
dummy list that also lists any arrays it dimensions.

   For example, `g77' should warn about the entry point `ALT' below,
since it includes `ARRAY' but not `ISIZE' in its list of arguments:

     SUBROUTINE PRIMARY(ARRAY, ISIZE)
     REAL ARRAY(ISIZE)
     ENTRY ALT(ARRAY)


File: g77.info,  Node: Invalid FORMAT Specifiers,  Next: Ambiguous Dialects,  Prev: Dummy Array Without Dimensioning Dummy,  Up: Missing Features

Invalid FORMAT Specifiers
-------------------------

   `g77' should check `FORMAT' specifiers for validity as it does
`FORMAT' statements.

   For example, a diagnostic would be produced for:

     PRINT 'HI THERE!'  !User meant PRINT *, 'HI THERE!'


File: g77.info,  Node: Ambiguous Dialects,  Next: Unused Labels,  Prev: Invalid FORMAT Specifiers,  Up: Missing Features

Ambiguous Dialects
------------------

   `g77' needs a set of options such as `-Wugly*', `-Wautomatic',
`-Wvxt', `-Wf90', and so on.  These would warn about places in the
user's source where ambiguities are found, helpful in resolving
ambiguities in the program's dialect or dialects.


File: g77.info,  Node: Unused Labels,  Next: Informational Messages,  Prev: Ambiguous Dialects,  Up: Missing Features

Unused Labels
-------------

   `g77' should warn about unused labels when `-Wunused' is in effect.


File: g77.info,  Node: Informational Messages,  Next: Uninitialized Variables at Run Time,  Prev: Unused Labels,  Up: Missing Features

Informational Messages
----------------------

   `g77' needs an option to suppress information messages (notes).
`-w' does this but also suppresses warnings.  The default should be to
suppress info messages.

   Perhaps info messages should simply be eliminated.


File: g77.info,  Node: Uninitialized Variables at Run Time,  Next: Bounds Checking at Run Time,  Prev: Informational Messages,  Up: Missing Features

Uninitialized Variables at Run Time
-----------------------------------

   `g77' needs an option to initialize everything (not otherwise
explicitly initialized) to "weird" (machine-dependent) values, e.g.
NaNs, bad (non-`NULL') pointers, and largest-magnitude integers, would
help track down references to some kinds of uninitialized variables at
run time.

   Note that use of the options `-O -Wuninitialized' can catch many
such bugs at compile time.


File: g77.info,  Node: Bounds Checking at Run Time,  Next: Labels Visible to Debugger,  Prev: Uninitialized Variables at Run Time,  Up: Missing Features

Bounds Checking at Run Time
---------------------------

   `g77' should offer run-time bounds-checking of array/subscript
references in a fashion similar to `f2c'.

   Note that `g77' already warns about references to out-of-bounds
elements of arrays when it detects these at compile time.


File: g77.info,  Node: Labels Visible to Debugger,  Prev: Bounds Checking at Run Time,  Up: Missing Features

Labels Visible to Debugger
--------------------------

   `g77' should output debugging information for statements labels, for
use by debuggers that know how to support them.  Same with weirder
things like construct names.  It is not yet known if any debug formats
or debuggers support these.


File: g77.info,  Node: Disappointments,  Next: Non-bugs,  Prev: Missing Features,  Up: Trouble

Disappointments and Misunderstandings
=====================================

   These problems are perhaps regrettable, but we don't know any
practical way around them for now.

* Menu:

* Mangling of Names::                       `SUBROUTINE FOO' is given
                                              external name `foo_'.
* Multiple Definitions of External Names::  No doing both `COMMON /FOO/'
                                              and `SUBROUTINE FOO'.
* Limitation on Implicit Declarations::     No `IMPLICIT CHARACTER*(*)'.


File: g77.info,  Node: Mangling of Names,  Next: Multiple Definitions of External Names,  Up: Disappointments

Mangling of Names in Source Code
--------------------------------

   The current external-interface design, which includes naming of
external procedures, COMMON blocks, and the library interface, has
various usability problems, including things like adding underscores
where not really necessary (and preventing easier inter-language
operability) and yet not providing complete namespace freedom for user
C code linked with Fortran apps (due to the naming of functions in the
library, among other things).

   Project GNU should at least get all this "right" for systems it
fully controls, such as the Hurd, and provide defaults and options for
compatibility with existing systems and interoperability with popular
existing compilers.


File: g77.info,  Node: Multiple Definitions of External Names,  Next: Limitation on Implicit Declarations,  Prev: Mangling of Names,  Up: Disappointments

Multiple Definitions of External Names
--------------------------------------

   `g77' doesn't allow a common block and an external procedure or
`BLOCK DATA' to have the same name.  Some systems allow this, but `g77'
does not, to be compatible with `f2c'.

   `g77' could special-case the way it handles `BLOCK DATA', since it
is not compatible with `f2c' in this particular area (necessarily,
since `g77' offers an important feature here), but it is likely that
such special-casing would be very annoying to people with programs that
use `EXTERNAL FOO', with no other mention of `FOO' in the same program
unit, to refer to external procedures, since the result would be that
`g77' would treat these references as requests to force-load BLOCK DATA
program units.

   In that case, if `g77' modified names of `BLOCK DATA' so they could
have the same names as `COMMON', users would find that their programs
wouldn't link because the `FOO' procedure didn't have its name
translated the same way.

   (Strictly speaking, `g77' could emit a
null-but-externally-satisfying definition of `FOO' with its name
transformed as if it had been a `BLOCK DATA', but that probably invites
more trouble than it's worth.)


File: g77.info,  Node: Limitation on Implicit Declarations,  Prev: Multiple Definitions of External Names,  Up: Disappointments

Limitation on Implicit Declarations
-----------------------------------

   `g77' disallows `IMPLICIT CHARACTER*(*)'.  This is not
standard-conforming.


File: g77.info,  Node: Non-bugs,  Next: Warnings and Errors,  Prev: Disappointments,  Up: Trouble

Certain Changes We Don't Want to Make
=====================================

   This section lists changes that people frequently request, but which
we do not make because we think GNU Fortran is better without them.

* Menu:

* Backslash in Constants::           Why `'\\'' is a constant that
                                       is one, not two, characters long.
* Initializing Before Specifying::   Why `DATA VAR/1/' can't precede
                                       `COMMON VAR'.
* Context-Sensitive Intrinsicness::  Why `CALL SQRT' won't work.
* Context-Sensitive Constants::      Why `9.435784839284958' is a
                                       single-precision constant,
                                       and might be interpreted as
                                       `9.435785' or similar.
* Equivalence Versus Equality::      Why `.TRUE. .EQ. .TRUE.' won't work.
* Order of Side Effects::            Why `J = IFUNC() - IFUNC()' might
                                       not behave as expected.


File: g77.info,  Node: Backslash in Constants,  Next: Initializing Before Specifying,  Up: Non-bugs

Backslash in Constants
----------------------

   In the opinion of many experienced Fortran users, `-fno-backslash'
should be the default, not `-fbackslash', as currently set by `g77'.

   First of all, you can always specify `-fno-backslash' to turn off
this processing.

   Despite not being within the spirit (though apparently within the
letter) of the ANSI FORTRAN 77 standard, `g77' defaults to
`-fbackslash' because that is what most UNIX `f77' commands default to,
and apparently lots of code depends on this feature.

   This is a particularly troubling issue.  The use of a C construct in
the midst of Fortran code is bad enough, worse when it makes existing
Fortran programs stop working (as happens when programs written for
non-UNIX systems are ported to UNIX systems with compilers that provide
the `-fbackslash' feature as the default--sometimes with no option to
turn it off).

   The author of GNU Fortran wished, for reasons of linguistic purity,
to make `-fno-backslash' the default for GNU Fortran and thus require
users of UNIX `f77' and `f2c' to specify `-fbackslash' to get the UNIX
behavior.

   However, the realization that `g77' is intended as a replacement for
*UNIX* `f77', caused the author to choose to make `g77' as compatible
with `f77' as feasible, which meant making `-fbackslash' the default.

   The primary focus on compatibility is at the source-code level, and
the question became "What will users expect a replacement for `f77' to
do, by default?"  Although at least one UNIX `f77' does not provide
`-fbackslash' as a default, it appears that the majority of them do,
which suggests that the majority of code that is compiled by UNIX `f77'
compilers expects `-fbackslash' to be the default.

   It is probably the case that more code exists that would *not* work
with `-fbackslash' in force than code that requires it be in force.

   However, most of *that* code is not being compiled with `f77', and
when it is, new build procedures (shell scripts, makefiles, and so on)
must be set up anyway so that they work under UNIX.  That makes a much
more natural and safe opportunity for non-UNIX users to adapt their
build procedures for `g77''s default of `-fbackslash' than would exist
for the majority of UNIX `f77' users who would have to modify existing,
working build procedures to explicitly specify `-fbackslash' if that was
not the default.

   One suggestion has been to configure the default for `-fbackslash'
(and perhaps other options as well) based on the configuration of `g77'.

   This is technically quite straightforward, but will be avoided even
in cases where not configuring defaults to be dependent on a particular
configuration greatly inconveniences some users of legacy code.

   Many users appreciate the GNU compilers because they provide an
environment that is uniform across machines.  These users would be
inconvenienced if the compiler treated things like the format of the
source code differently on certain machines.

   Occasionally users write programs intended only for a particular
machine type.  On these occasions, the users would benefit if the GNU
Fortran compiler were to support by default the same dialect as the
other compilers on that machine.  But such applications are rare.  And
users writing a program to run on more than one type of machine cannot
possibly benefit from this kind of compatibility.  (This is consistent
with the design goals for `gcc'.  To change them for `g77', you must
first change them for `gcc'.  Do not ask the maintainers of `g77' to do
this for you, or to disassociate `g77' from the widely understood, if
not widely agreed-upon, goals for GNU compilers in general.)

   This is why GNU Fortran does and will treat backslashes in the same
fashion on all types of machines (by default).  *Note Direction of
Language Development::, for more information on this overall philosophy
guiding the development of the GNU Fortran language.

   Of course, users strongly concerned about portability should indicate
explicitly in their build procedures which options are expected by
their source code, or write source code that has as few such
expectations as possible.

   For example, avoid writing code that depends on backslash (`\')
being interpreted either way in particular, such as by starting a
program unit with:

     CHARACTER BACKSL
     PARAMETER (BACKSL = '\\')

Then, use concatenation of `BACKSL' anyplace a backslash is desired.
In this way, users can write programs which have the same meaning in
many Fortran dialects.

   (However, this technique does not work for Hollerith constants--which
is just as well, since the only generally portable uses for Hollerith
constants are in places where character constants can and should be
used instead, for readability.)


File: g77.info,  Node: Initializing Before Specifying,  Next: Context-Sensitive Intrinsicness,  Prev: Backslash in Constants,  Up: Non-bugs

Initializing Before Specifying
------------------------------

   `g77' does not allow `DATA VAR/1/' to appear in the source code
before `COMMON VAR', `DIMENSION VAR(10)', `INTEGER VAR', and so on.  In
general, `g77' requires initialization of a variable or array to be
specified *after* all other specifications of attributes (type, size,
placement, and so on) of that variable or array are specified (though
*confirmation* of data type is permitted).

   It is *possible* `g77' will someday allow all of this, even though
it is not allowed by the FORTRAN 77 standard.

   Then again, maybe it is better to have `g77' always require
placement of `DATA' so that it can possibly immediately write constants
to the output file, thus saving time and space.

   That is, `DATA A/1000000*1/' should perhaps always be immediately
writable to canonical assembler, unless it's already known to be in a
`COMMON' area following as-yet-uninitialized stuff, and to do this it
cannot be followed by `COMMON A'.


File: g77.info,  Node: Context-Sensitive Intrinsicness,  Next: Context-Sensitive Constants,  Prev: Initializing Before Specifying,  Up: Non-bugs

Context-Sensitive Intrinsicness
-------------------------------

   `g77' treats procedure references to *possible* intrinsic names as
always enabling their intrinsic nature, regardless of whether the
*form* of the reference is valid for that intrinsic.

   For example, `CALL SQRT' is interpreted by `g77' as an invalid
reference to the `SQRT' intrinsic function, because the reference is a
subroutine invocation.

   First, `g77' recognizes the statement `CALL SQRT' as a reference to
a *procedure* named `SQRT', not to a *variable* with that name (as it
would for a statement such as `V = SQRT').

   Next, `g77' establishes that, in the program unit being compiled,
`SQRT' is an intrinsic--not a subroutine that happens to have the same
name as an intrinsic (as would be the case if, for example, `EXTERNAL
SQRT' was present).

   Finally, `g77' recognizes that the *form* of the reference is
invalid for that particular intrinsic.  That is, it recognizes that it
is invalid for an intrinsic *function*, such as `SQRT', to be invoked as
a *subroutine*.

   At that point, `g77' issues a diagnostic.

   Some users claim that it is "obvious" that `CALL SQRT' references an
external subroutine of their own, not an intrinsic function.

   However, `g77' knows about intrinsic subroutines, not just
functions, and is able to support both having the same names, for
example.

   As a result of this, `g77' rejects calls to intrinsics that are not
subroutines, and function invocations of intrinsics that are not
functions, just as it (and most compilers) rejects invocations of
intrinsics with the wrong number (or types) of arguments.

   So, use the `EXTERNAL SQRT' statement in a program unit that calls a
user-written subroutine named `SQRT'.


File: g77.info,  Node: Context-Sensitive Constants,  Next: Equivalence Versus Equality,  Prev: Context-Sensitive Intrinsicness,  Up: Non-bugs

Context-Sensitive Constants
---------------------------

   `g77' does not use context to determine the types of constants or
named constants (`PARAMETER'), except for (non-standard) typeless
constants such as `'123'O'.

   For example, consider the following statement:

     PRINT *, 9.435784839284958 * 2D0

`g77' will interpret the (truncated) constant `9.435784839284958' as a
`REAL(KIND=1)', not `REAL(KIND=2)', constant, because the suffix `D0'
is not specified.

   As a result, the output of the above statement when compiled by
`g77' will appear to have "less precision" than when compiled by other
compilers.

   In these and other cases, some compilers detect the fact that a
single-precision constant is used in a double-precision context and
therefore interpret the single-precision constant as if it was
*explicitly* specified as a double-precision constant.  (This has the
effect of appending *decimal*, not *binary*, zeros to the fractional
part of the number--producing different computational results.)

   The reason this misfeature is dangerous is that a slight, apparently
innocuous change to the source code can change the computational
results.  Consider:

     REAL ALMOST, CLOSE
     DOUBLE PRECISION FIVE
     PARAMETER (ALMOST = 5.000000000001)
     FIVE = 5
     CLOSE = 5.000000000001
     PRINT *, 5.000000000001 - FIVE
     PRINT *, ALMOST - FIVE
     PRINT *, CLOSE - FIVE
     END

Running the above program should result in the same value being printed
three times.  With `g77' as the compiler, it does.

   However, compiled by many other compilers, running the above program
would print two or three distinct values, because in two or three of
the statements, the constant `5.000000000001', which on most systems is
exactly equal to `5.'  when interpreted as a single-precision constant,
is instead interpreted as a double-precision constant, preserving the
represented precision.  However, this "clever" promotion of type does
not extend to variables or, in some compilers, to named constants.

   Since programmers often are encouraged to replace manifest constants
or permanently-assigned variables with named constants (`PARAMETER' in
Fortran), and might need to replace some constants with variables
having the same values for pertinent portions of code, it is important
that compilers treat code so modified in the same way so that the
results of such programs are the same.  `g77' helps in this regard by
treating constants just the same as variables in terms of determining
their types in a context-independent way.

   Still, there is a lot of existing Fortran code that has been written
to depend on the way other compilers freely interpret constants' types
based on context, so anything `g77' can do to help flag cases of this
in such code could be very helpful.


File: g77.info,  Node: Equivalence Versus Equality,  Next: Order of Side Effects,  Prev: Context-Sensitive Constants,  Up: Non-bugs

Equivalence Versus Equality
---------------------------

   Use of `.EQ.' and `.NE.' on `LOGICAL' operands is not supported,
except via `-fugly', which is not recommended except for legacy code
(where the behavior expected by the *code* is assumed).

   Legacy code should be changed, as resources permit, to use `.EQV.'
and `.NEQV.' instead, as these are permitted by the various Fortran
standards.

   New code should never be written expecting `.EQ.' or `.NE.'  to work
if either of its operands is `LOGICAL'.

   The problem with supporting this "feature" is that there is unlikely
to be consensus on how it works, as illustrated by the following sample
program:

     LOGICAL L,M,N
     DATA L,M,N /3*.FALSE./
     IF (L.AND.M.EQ.N) PRINT *,'L.AND.M.EQ.N'
     END

   The issue raised by the above sample program is: what is the
precedence of `.EQ.' (and `.NE.') when applied to `LOGICAL' operands?

   Some programmers will argue that it is the same as the precedence
for `.EQ.' when applied to numeric (such as `INTEGER') operands.  By
this interpretation, the subexpression `M.EQ.N' must be evaluated first
in the above program, resulting in a program that, when run, does not
execute the `PRINT' statement.

   Other programmers will argue that the precedence is the same as the
precedence for `.EQV.', which is restricted by the standards to
`LOGICAL' operands.  By this interpretation, the subexpression
`L.AND.M' must be evaluated first, resulting in a program that *does*
execute the `PRINT' statement.

   Assigning arbitrary semantic interpretations to syntactic expressions
that might legitimately have more than one "obvious" interpretation is
generally unwise.

   The creators of the various Fortran standards have done a good job
in this case, requiring a distinct set of operators (which have their
own distinct precedence) to compare `LOGICAL' operands.  This
requirement results in expression syntax with more certain precedence
(without requiring substantial context), making it easier for
programmers to read existing code.  `g77' will avoid muddying up
elements of the Fortran language that were well-designed in the first
place.

   (Ask C programmers about the precedence of expressions such as `(a)
& (b)' and `(a) - (b)'--they cannot even tell you, without knowing more
context, whether the `&' and `-' operators are infix (binary) or unary!)


File: g77.info,  Node: Order of Side Effects,  Prev: Equivalence Versus Equality,  Up: Non-bugs

Order of Side Effects
---------------------

   `g77' does not necessarily produce code that, when run, performs
side effects (such as those performed by function invocations) in the
same order as in some other compiler--or even in the same order as
another version, port, or invocation (using different command-line
options) of `g77'.

   It is never safe to depend on the order of evaluation of side
effects.  For example, an expression like this may very well behave
differently from one compiler to another:

     J = IFUNC() - IFUNC()

There is no guarantee that `IFUNC' will be evaluated in any particular
order.  Either invocation might happen first.  If `IFUNC' returns 5 the
first time it is invoked, and returns 12 the second time, `J' might end
up with the value `7', or it might end up with `-7'.

   Generally, in Fortran, procedures with side-effects intended to be
visible to the caller are best designed as *subroutines*, not functions.
Examples of such side-effects include:

   * The generation of random numbers that are intended to influence
     return values.

   * Performing I/O (other than internal I/O to local variables).

   * Updating information in common blocks.

   An example of a side-effect that is not intended to be visible to
the caller is a function that maintains a cache of recently calculated
results, intended solely to speed repeated invocations of the function
with identical arguments.  Such a function can be safely used in
expressions, because if the compiler optimizes away one or more calls
to the function, operation of the program is unaffected (aside from
being speeded up).


File: g77.info,  Node: Warnings and Errors,  Prev: Non-bugs,  Up: Trouble

Warning Messages and Error Messages
===================================

   The GNU compiler can produce two kinds of diagnostics: errors and
warnings.  Each kind has a different purpose:

     *Errors* report problems that make it impossible to compile your
     program.  GNU Fortran reports errors with the source file name,
     line number, and column within the line where the problem is
     apparent.

     *Warnings* report other unusual conditions in your code that
     *might* indicate a problem, although compilation can (and does)
     proceed.  Warning messages also report the source file name, line
     number, and column information, but include the text `warning:' to
     distinguish them from error messages.

   Warnings might indicate danger points where you should check to make
sure that your program really does what you intend; or the use of
obsolete features; or the use of nonstandard features of GNU Fortran.
Many warnings are issued only if you ask for them, with one of the `-W'
options (for instance, `-Wall' requests a variety of useful warnings).

   *Note:* Currently, the text of the line and a pointer to the column
is printed in most `g77' diagnostics.  Probably, as of version 0.6,
`g77' will no longer print the text of the source line, instead printing
the column number following the file name and line number in a form
that GNU Emacs recognizes.  This change is expected to speed up and
reduce the memory usage of the `g77' compiler.

   *Note Options to Request or Suppress Warnings: Warning Options, for
more detail on these and related command-line options.


File: g77.info,  Node: Open Questions,  Next: Bugs,  Prev: Trouble,  Up: Top

Open Questions
**************

   Please consider offering useful answers to these questions!

   * How do system administrators and users manage multiple incompatible
     Fortran compilers on their systems?  How can `g77' contribute to
     this, or at least avoiding intefering with it?

     Currently, `g77' provides rudimentary ways to choose whether to
     overwrite portions of other Fortran compilation systems (such as
     the `f77' command and the `libf2c' library).  Is this sufficient?
     What happens when users choose not to overwrite these--does `g77'
     work properly in all such installations, picking up its own
     versions, or does it pick up the existing "alien" versions it
     didn't overwrite with its own, possibly leading to subtle bugs?

   * `LOC()' and other intrinsics are probably somewhat misclassified.
     Is the a need for more precise classification of intrinsics, and
     if so, what are the appropriate groupings?  Is there a need to
     individually enable/disable/delete/hide intrinsics from the
     command line?


File: g77.info,  Node: Bugs,  Next: Service,  Prev: Open Questions,  Up: Top

Reporting Bugs
**************

   Your bug reports play an essential role in making GNU Fortran
reliable.

   When you encounter a problem, the first thing to do is to see if it
is already known.  *Note Trouble::.  If it isn't known, then you should
report the problem.

   Reporting a bug might help you by bringing a solution to your
problem, or it might not.  (If it does not, look in the service
directory; see *Note Service::.)  In any case, the principal function
of a bug report is to help the entire community by making the next
version of GNU Fortran work better.  Bug reports are your contribution
to the maintenance of GNU Fortran.

   Since the maintainers are very overloaded, we cannot respond to every
bug report.  However, if the bug has not been fixed, we are likely to
send you a patch and ask you to tell us whether it works.

   In order for a bug report to serve its purpose, you must include the
information that makes for fixing the bug.

* Menu:

* Criteria: Bug Criteria.    Have you really found a bug?
* Where: Bug Lists.          Where to send your bug report.
* Reporting: Bug Reporting.  How to report a bug effectively.
* Patches: Sending Patches.  How to send a patch for GNU Fortran.

   *Note Known Causes of Trouble with GNU Fortran: Trouble, for
information on problems we already know about.

   *Note How To Get Help with GNU Fortran: Service, for information on
where to ask for help.


File: g77.info,  Node: Bug Criteria,  Next: Bug Lists,  Up: Bugs

Have You Found a Bug?
=====================

   If you are not sure whether you have found a bug, here are some
guidelines:

   * If the compiler gets a fatal signal, for any input whatever, that
     is a compiler bug.  Reliable compilers never crash--they just
     remain obsolete.

   * If the compiler produces invalid assembly code, for any input
     whatever, that is a compiler bug, unless the compiler reports
     errors (not just warnings) which would ordinarily prevent the
     assembler from being run.

   * If the compiler produces valid assembly code that does not
     correctly execute the input source code, that is a compiler bug.

     However, you must double-check to make sure, because you might
     have run into an incompatibility between GNU Fortran and
     traditional Fortran.  These incompatibilities might be considered
     bugs, but they are inescapable consequences of valuable features.

     Or you might have a program whose behavior is undefined, which
     happened by chance to give the desired results with another
     Fortran compiler.  It is best to check the relevant Fortran
     standard thoroughly if it is possible that the program indeed does
     something undefined.

     After you have localized the error to a single source line, it
     should be easy to check for these things.  If your program is
     correct and well defined, you have found a compiler bug.

     It might help if, in your submission, you identified the specific
     language in the relevant Fortran standard that specifies the
     desired behavior, if it isn't likely to be obvious and agreed-upon
     by all Fortran users.

   * If the compiler produces an error message for valid input, that is
     a compiler bug.

   * If the compiler does not produce an error message for invalid
     input, that is a compiler bug.  However, you should note that your
     idea of "invalid input" might be someone else's idea of "an
     extension" or "support for traditional practice".

   * If you are an experienced user of Fortran compilers, your
     suggestions for improvement of GNU Fortran are welcome in any case.

   Many, perhaps most, bug reports against `g77' turn out to be bugs in
the user's code.  While we find such bug reports educational, they
sometimes take a considerable amount of time to track down or at least
respond to--time we could be spending making `g77', not some user's
code, better.

   Some steps you can take to verify that the bug is not certainly in
the code you're compiling with `g77':

   * Compile your code using the `g77' options `-W -Wall -O'.  These
     options enable many useful warning; the `-O' option enables flow
     analysis that enables the uninitialized-variable warning.

     If you investigate the warnings and find evidence of possible bugs
     in your code, fix them first and retry `g77'.

   * Compile your code using the `g77' options `-finit-local-zero',
     `-fno-automatic', `-ffloat-store', and various combinations
     thereof.

     If your code works with any of these combinations, that is not
     proof that the bug isn't in `g77'--a `g77' bug exposed by your
     code might simply be avoided, or have a different, more subtle
     effect, when different options are used--but it can be a strong
     indicator that your code is making unawarranted assumptions about
     the Fortran dialect and/or underlying machine it is being compiled
     and run on.

     *Note Overly Convenient Command-Line Options: Overly Convenient
     Options, for information on the `-fno-automatic' and
     `-finit-local-zero' options and how to convert their use into
     selective changes in your own code.

   * Validate your code with `ftnchek' or a similar code-checking tool.
     `ftncheck' can be found at `ftp://ftp.netlib.org/fortran' or
     `ftp://ftp.dsm.fordham.edu'.

     Here are some sample `Makefile' rules using `ftnchek' "project"
     files to do cross-file checking and `sfmakedepend' (from
     `ftp://ahab.rutgers.edu/pub/perl/sfmakedepend') to maintain
     dependencies automatically.  These assume the use of GNU `make'.

          # Dummy suffix for ftnchek targets:
          .SUFFIXES: .chek
          .PHONY: chekall
          
          # How to compile .f files (for implicit rule):
          FC = g77
          # Assume `include' directory:
          FFLAGS = -Iinclude -g -O -Wall
          
          # Flags for ftnchek:
          CHEK1 = -array=0 -include=includes -noarray
          CHEK2 = -nonovice -usage=1 -notruncation
          CHEKFLAGS = $(CHEK1) $(CHEK2)
          
          # Run ftnchek with all the .prj files except the one corresponding
          # to the target's root:
          %.chek : %.f ; \
            ftnchek $(filter-out $*.prj,$(PRJS)) $(CHEKFLAGS) \
              -noextern -library $<
          
          # Derive a project file from a source file:
          %.prj : %.f ; \
            ftnchek $(CHEKFLAGS) -noextern -project -library $<
          
          # The list of objects is assumed to be in variable OBJS.
          # Sources corresponding to the objects:
          SRCS = $(OBJS:%.o=%.f)
          # ftnchek project files:
          PRJS = $(OBJS:%.o=%.prj)
          
          # Build the program
          prog: $(OBJS) ; \
            $(FC) -o $ $(OBJS)
          
          chekall: $(PRJS) ; \
            ftnchek $(CHEKFLAGS) $(PRJS)
          
          prjs: $(PRJS)
          
          # For Emacs M-x find-tag:
          TAGS: $(SRCS) ; \
            etags $(SRCS)
          
          # Rebuild dependencies:
          depend: ; \
            sfmakedepend -I $(PLTLIBDIR) -I includes -a prj $(SRCS1)

   * Try your code out using other Fortran compilers, such as `f2c'.
     If it does not work on at least one other compiler (assuming the
     compiler supports the features the code needs), that is a strong
     indicator of a bug in the code.

     However, even if your code works on many compilers *except* `g77',
     that does *not* mean the bug is in `g77'.  It might mean the bug
     is in your code, and that `g77' simply exposes it more readily
     than other compilers.


File: g77.info,  Node: Bug Lists,  Next: Bug Reporting,  Prev: Bug Criteria,  Up: Bugs

Where to Report Bugs
====================

   Send bug reports for GNU Fortran to <fortran@gnu.org>.

   Often people think of posting bug reports to a newsgroup instead of
mailing them.  This sometimes appears to work, but it has one problem
which can be crucial: a newsgroup posting does not contain a mail path
back to the sender.  Thus, if maintainers need more information, they
might be unable to reach you.  For this reason, you should always send
bug reports by mail to the proper mailing list.

   As a last resort, send bug reports on paper to:

     GNU Compiler Bugs
     Free Software Foundation
     59 Temple Place - Suite 330
     Boston, MA 02111-1307, USA


File: g77.info,  Node: Bug Reporting,  Next: Sending Patches,  Prev: Bug Lists,  Up: Bugs

How to Report Bugs
==================

   The fundamental principle of reporting bugs usefully is this:
*report all the facts*.  If you are not sure whether to state a fact or
leave it out, state it!

   Often people omit facts because they think they know what causes the
problem and they conclude that some details don't matter.  Thus, you
might assume that the name of the variable you use in an example does
not matter.  Well, probably it doesn't, but one cannot be sure.
Perhaps the bug is a stray memory reference which happens to fetch from
the location where that name is stored in memory; perhaps, if the name
were different, the contents of that location would fool the compiler
into doing the right thing despite the bug.  Play it safe and give a
specific, complete example.  That is the easiest thing for you to do,
and the most helpful.

   Keep in mind that the purpose of a bug report is to enable someone to
fix the bug if it is not known.  It isn't very important what happens if
the bug is already known.  Therefore, always write your bug reports on
the assumption that the bug is not known.

   Sometimes people give a few sketchy facts and ask, "Does this ring a
bell?"  This cannot help us fix a bug, so it is rarely helpful.  We
respond by asking for enough details to enable us to investigate.  You
might as well expedite matters by sending them to begin with.
(Besides, there are enough bells ringing around here as it is.)

   Try to make your bug report self-contained.  If we have to ask you
for more information, it is best if you include all the previous
information in your response, as well as the information that was
missing.

   Please report each bug in a separate message.  This makes it easier
for us to track which bugs have been fixed and to forward your bugs
reports to the appropriate maintainer.

   Do not compress and encode any part of your bug report using programs
such as `uuencode'.  If you do so it will slow down the processing of
your bug.  If you must submit multiple large files, use `shar', which
allows us to read your message without having to run any decompression
programs.

   (As a special exception for GNU Fortran bug-reporting, at least for
now, if you are sending more than a few lines of code, if your
program's source file format contains "interesting" things like
trailing spaces or strange characters, or if you need to include binary
data files, it is acceptable to put all the files together in a `tar'
archive, and, whether you need to do that, it is acceptable to then
compress the single file (`tar' archive or source file) using `gzip'
and encode it via `uuencode'.  Do not use any MIME stuff--the current
maintainer can't decode this.  Using `compress' instead of `gzip' is
acceptable, assuming you have licensed the use of the patented
algorithm in `compress' from Unisys.)

   To enable someone to investigate the bug, you should include all
these things:

   * The version of GNU Fortran.  You can get this by running `g77'
     with the `-v' option.  (Ignore any error messages that might be
     displayed when the linker is run.)

     Without this, we won't know whether there is any point in looking
     for the bug in the current version of GNU Fortran.

   * A complete input file that will reproduce the bug.  If the bug is
     in the compiler proper (`f771') and you are using the C
     preprocessor, run your source file through the C preprocessor by
     doing `g77 -E SOURCEFILE > OUTFILE', then include the contents of
     OUTFILE in the bug report.  (When you do this, use the same `-I',
     `-D' or `-U' options that you used in actual compilation.)

     A single statement is not enough of an example.  In order to
     compile it, it must be embedded in a complete file of compiler
     input; and the bug might depend on the details of how this is done.

     Without a real example one can compile, all anyone can do about
     your bug report is wish you luck.  It would be futile to try to
     guess how to provoke the bug.  For example, bugs in register
     allocation and reloading frequently depend on every little detail
     of the function they happen in.

   * Note that you should include with your bug report any files
     included by the source file (via the `#include' or `INCLUDE'
     directive) that you send, and any files they include, and so on.

     It is not necessary to replace the `#include' and `INCLUDE'
     directives with the actual files in the version of the source file
     that you send, but it might make submitting the bug report easier
     in the end.  However, be sure to *reproduce* the bug using the
     *exact* version of the source material you submit, to avoid
     wild-goose chases.

   * The command arguments you gave GNU Fortran to compile that example
     and observe the bug.  For example, did you use `-O'?  To guarantee
     you won't omit something important, list all the options.

     If we were to try to guess the arguments, we would probably guess
     wrong and then we would not encounter the bug.

   * The type of machine you are using, and the operating system name
     and version number.  (Much of this information is printed by `g77
     -v'--if you include that, send along any additional info you have
     that you don't see clearly represented in that output.)

   * The operands you gave to the `configure' command when you installed
     the compiler.

   * A complete list of any modifications you have made to the compiler
     source.  (We don't promise to investigate the bug unless it
     happens in an unmodified compiler.  But if you've made
     modifications and don't tell us, then you are sending us on a
     wild-goose chase.)

     Be precise about these changes.  A description in English is not
     enough--send a context diff for them.

     Adding files of your own (such as a machine description for a
     machine we don't support) is a modification of the compiler source.

   * Details of any other deviations from the standard procedure for
     installing GNU Fortran.

   * A description of what behavior you observe that you believe is
     incorrect.  For example, "The compiler gets a fatal signal," or,
     "The assembler instruction at line 208 in the output is incorrect."

     Of course, if the bug is that the compiler gets a fatal signal,
     then one can't miss it.  But if the bug is incorrect output, the
     maintainer might not notice unless it is glaringly wrong.  None of
     us has time to study all the assembler code from a 50-line Fortran
     program just on the chance that one instruction might be wrong.
     We need *you* to do this part!

     Even if the problem you experience is a fatal signal, you should
     still say so explicitly.  Suppose something strange is going on,
     such as, your copy of the compiler is out of synch, or you have
     encountered a bug in the C library on your system.  (This has
     happened!)  Your copy might crash and the copy here would not.  If
     you said to expect a crash, then when the compiler here fails to
     crash, we would know that the bug was not happening.  If you don't
     say to expect a crash, then we would not know whether the bug was
     happening.  We would not be able to draw any conclusion from our
     observations.

     If the problem is a diagnostic when building GNU Fortran with some
     other compiler, say whether it is a warning or an error.

     Often the observed symptom is incorrect output when your program
     is run.  Sad to say, this is not enough information unless the
     program is short and simple.  None of us has time to study a large
     program to figure out how it would work if compiled correctly,
     much less which line of it was compiled wrong.  So you will have
     to do that.  Tell us which source line it is, and what incorrect
     result happens when that line is executed.  A person who
     understands the program can find this as easily as finding a bug
     in the program itself.

   * If you send examples of assembler code output from GNU Fortran,
     please use `-g' when you make them.  The debugging information
     includes source line numbers which are essential for correlating
     the output with the input.

   * If you wish to mention something in the GNU Fortran source, refer
     to it by context, not by line number.

     The line numbers in the development sources don't match those in
     your sources.  Your line numbers would convey no convenient
     information to the maintainers.

   * Additional information from a debugger might enable someone to
     find a problem on a machine which he does not have available.
     However, you need to think when you collect this information if
     you want it to have any chance of being useful.

     For example, many people send just a backtrace, but that is never
     useful by itself.  A simple backtrace with arguments conveys little
     about GNU Fortran because the compiler is largely data-driven; the
     same functions are called over and over for different RTL insns,
     doing different things depending on the details of the insn.

     Most of the arguments listed in the backtrace are useless because
     they are pointers to RTL list structure.  The numeric values of the
     pointers, which the debugger prints in the backtrace, have no
     significance whatever; all that matters is the contents of the
     objects they point to (and most of the contents are other such
     pointers).

     In addition, most compiler passes consist of one or more loops that
     scan the RTL insn sequence.  The most vital piece of information
     about such a loop--which insn it has reached--is usually in a
     local variable, not in an argument.

     What you need to provide in addition to a backtrace are the values
     of the local variables for several stack frames up.  When a local
     variable or an argument is an RTX, first print its value and then
     use the GDB command `pr' to print the RTL expression that it points
     to.  (If GDB doesn't run on your machine, use your debugger to call
     the function `debug_rtx' with the RTX as an argument.)  In
     general, whenever a variable is a pointer, its value is no use
     without the data it points to.

   Here are some things that are not necessary:

   * A description of the envelope of the bug.

     Often people who encounter a bug spend a lot of time investigating
     which changes to the input file will make the bug go away and which
     changes will not affect it.

     This is often time consuming and not very useful, because the way
     we will find the bug is by running a single example under the
     debugger with breakpoints, not by pure deduction from a series of
     examples.  You might as well save your time for something else.

     Of course, if you can find a simpler example to report *instead* of
     the original one, that is a convenience.  Errors in the output
     will be easier to spot, running under the debugger will take less
     time, etc.  Most GNU Fortran bugs involve just one function, so
     the most straightforward way to simplify an example is to delete
     all the function definitions except the one where the bug occurs.
     Those earlier in the file may be replaced by external declarations
     if the crucial function depends on them.  (Exception: inline
     functions might affect compilation of functions defined later in
     the file.)

     However, simplification is not vital; if you don't want to do this,
     report the bug anyway and send the entire test case you used.

   * In particular, some people insert conditionals `#ifdef BUG' around
     a statement which, if removed, makes the bug not happen.  These
     are just clutter; we won't pay any attention to them anyway.
     Besides, you should send us preprocessor output, and that can't
     have conditionals.

   * A patch for the bug.

     A patch for the bug is useful if it is a good one.  But don't omit
     the necessary information, such as the test case, on the
     assumption that a patch is all we need.  We might see problems
     with your patch and decide to fix the problem another way, or we
     might not understand it at all.

     Sometimes with a program as complicated as GNU Fortran it is very
     hard to construct an example that will make the program follow a
     certain path through the code.  If you don't send the example, we
     won't be able to construct one, so we won't be able to verify that
     the bug is fixed.

     And if we can't understand what bug you are trying to fix, or why
     your patch should be an improvement, we won't install it.  A test
     case will help us to understand.

     *Note Sending Patches::, for guidelines on how to make it easy for
     us to understand and install your patches.

   * A guess about what the bug is or what it depends on.

     Such guesses are usually wrong.  Even the maintainer can't guess
     right about such things without first using the debugger to find
     the facts.

   * A core dump file.

     We have no way of examining a core dump for your type of machine
     unless we have an identical system--and if we do have one, we
     should be able to reproduce the crash ourselves.


File: g77.info,  Node: Sending Patches,  Prev: Bug Reporting,  Up: Bugs

Sending Patches for GNU Fortran
===============================

   If you would like to write bug fixes or improvements for the GNU
Fortran compiler, that is very helpful.  Send suggested fixes to the
bug report mailing list, <fortran@gnu.org>.

   Please follow these guidelines so we can study your patches
efficiently.  If you don't follow these guidelines, your information
might still be useful, but using it will take extra work.  Maintaining
GNU Fortran is a lot of work in the best of circumstances, and we can't
keep up unless you do your best to help.

   * Send an explanation with your changes of what problem they fix or
     what improvement they bring about.  For a bug fix, just include a
     copy of the bug report, and explain why the change fixes the bug.

     (Referring to a bug report is not as good as including it, because
     then we will have to look it up, and we have probably already
     deleted it if we've already fixed the bug.)

   * Always include a proper bug report for the problem you think you
     have fixed.  We need to convince ourselves that the change is
     right before installing it.  Even if it is right, we might have
     trouble judging it if we don't have a way to reproduce the problem.

   * Include all the comments that are appropriate to help people
     reading the source in the future understand why this change was
     needed.

   * Don't mix together changes made for different reasons.  Send them
     *individually*.

     If you make two changes for separate reasons, then we might not
     want to install them both.  We might want to install just one.  If
     you send them all jumbled together in a single set of diffs, we
     have to do extra work to disentangle them--to figure out which
     parts of the change serve which purpose.  If we don't have time
     for this, we might have to ignore your changes entirely.

     If you send each change as soon as you have written it, with its
     own explanation, then the two changes never get tangled up, and we
     can consider each one properly without any extra work to
     disentangle them.

     Ideally, each change you send should be impossible to subdivide
     into parts that we might want to consider separately, because each
     of its parts gets its motivation from the other parts.

   * Send each change as soon as that change is finished.  Sometimes
     people think they are helping us by accumulating many changes to
     send them all together.  As explained above, this is absolutely
     the worst thing you could do.

     Since you should send each change separately, you might as well
     send it right away.  That gives us the option of installing it
     immediately if it is important.

   * Use `diff -c' to make your diffs.  Diffs without context are hard
     for us to install reliably.  More than that, they make it hard for
     us to study the diffs to decide whether we want to install them.
     Unidiff format is better than contextless diffs, but not as easy
     to read as `-c' format.

     If you have GNU `diff', use `diff -cp', which shows the name of the
     function that each change occurs in.  (The maintainer of GNU
     Fortran currently uses `diff -rcp2N'.)

   * Write the change log entries for your changes.  We get lots of
     changes, and we don't have time to do all the change log writing
     ourselves.

     Read the `ChangeLog' file to see what sorts of information to put
     in, and to learn the style that we use.  The purpose of the change
     log is to show people where to find what was changed.  So you need
     to be specific about what functions you changed; in large
     functions, it's often helpful to indicate where within the
     function the change was.

     On the other hand, once you have shown people where to find the
     change, you need not explain its purpose.  Thus, if you add a new
     function, all you need to say about it is that it is new.  If you
     feel that the purpose needs explaining, it probably does--but the
     explanation will be much more useful if you put it in comments in
     the code.

     If you would like your name to appear in the header line for who
     made the change, send us the header line.

   * When you write the fix, keep in mind that we can't install a
     change that would break other systems.

     People often suggest fixing a problem by changing
     machine-independent files such as `toplev.c' to do something
     special that a particular system needs.  Sometimes it is totally
     obvious that such changes would break GNU Fortran for almost all
     users.  We can't possibly make a change like that.  At best it
     might tell us how to write another patch that would solve the
     problem acceptably.

     Sometimes people send fixes that *might* be an improvement in
     general--but it is hard to be sure of this.  It's hard to install
     such changes because we have to study them very carefully.  Of
     course, a good explanation of the reasoning by which you concluded
     the change was correct can help convince us.

     The safest changes are changes to the configuration files for a
     particular machine.  These are safe because they can't create new
     bugs on other machines.

     Please help us keep up with the workload by designing the patch in
     a form that is good to install.


File: g77.info,  Node: Service,  Next: Adding Options,  Prev: Bugs,  Up: Top

How To Get Help with GNU Fortran
********************************

   If you need help installing, using or changing GNU Fortran, there
are two ways to find it:

   * Look in the service directory for someone who might help you for a
     fee.  The service directory is found in the file named `SERVICE'
     in the GNU CC distribution.

   * Send a message to <fortran@gnu.org>.


File: g77.info,  Node: Adding Options,  Next: Projects,  Prev: Service,  Up: Top

Adding Options
**************

   To add a new command-line option to `g77', first decide what kind of
option you wish to add.  Search the `g77' and `gcc' documentation for
one or more options that is most closely like the one you want to add
(in terms of what kind of effect it has, and so on) to help clarify its
nature.

   * *Fortran options* are options that apply only when compiling
     Fortran programs.  They are accepted by `g77' and `gcc', but they
     apply only when compiling Fortran programs.

   * *Compiler options* are options that apply when compiling most any
     kind of program.

   *Fortran options* are listed in the file `gcc/f/lang-options.h',
which is used during the build of `gcc' to build a list of all options
that are accepted by at least one language's compiler.  This list goes
into the `lang_options' array in `gcc/toplev.c', which uses this array
to determine whether a particular option should be offered to the
linked-in front end for processing by calling `lang_option_decode',
which, for `g77', is in `gcc/f/com.c' and just calls
`ffe_decode_option'.

   If the linked-in front end "rejects" a particular option passed to
it, `toplev.c' just ignores the option, because *some* language's
compiler is willing to accept it.

   This allows commands like `gcc -fno-asm foo.c bar.f' to work, even
though Fortran compilation does not currently support the `-fno-asm'
option; even though the `f771' version of `lang_decode_option' rejects
`-fno-asm', `toplev.c' doesn't produce a diagnostic because some other
language (C) does accept it.

   This also means that commands like `g77 -fno-asm foo.f' yield no
diagnostics, despite the fact that no phase of the command was able to
recognize and process `-fno-asm'--perhaps a warning about this would be
helpful if it were possible.

   Code that processes Fortran options is found in `gcc/f/top.c',
function `ffe_decode_option'.  This code needs to check positive and
negative forms of each option.

   The defaults for Fortran options are set in their global
definitions, also found in `gcc/f/top.c'.  Many of these defaults are
actually macros defined in `gcc/f/target.h', since they might be
machine-specific.  However, since, in practice, GNU compilers should
behave the same way on all configurations (especially when it comes to
language constructs), the practice of setting defaults in `target.h' is
likely to be deprecated and, ultimately, stopped in future versions of
`g77'.

   Accessor macros for Fortran options, used by code in the `g77' FFE,
are defined in `gcc/f/top.h'.

   *Compiler options* are listed in `gcc/toplev.c' in the array
`f_options'.  An option not listed in `lang_options' is looked up in
`f_options' and handled from there.

   The defaults for compiler options are set in the global definitions
for the corresponding variables, some of which are in `gcc/toplev.c'.

   You can set different defaults for *Fortran-oriented* or
*Fortran-reticent* compiler options by changing the way `f771' handles
the `-fset-g77-defaults' option, which is always provided as the first
option when called by `g77' or `gcc'.

   This code is in `ffe_decode_options' in `gcc/f/top.c'.  Have it
change just the variables that you want to default to a different
setting for Fortran compiles compared to compiles of other languages.

   The `-fset-g77-defaults' option is passed to `f771' automatically
because of the specification information kept in `gcc/f/lang-specs.h'.
This file tells the `gcc' command how to recognize, in this case,
Fortran source files (those to be preprocessed, and those that are
not), and further, how to invoke the appropriate programs (including
`f771') to process those source files.

   It is in `gcc/f/lang-specs.h' that `-fset-g77-defaults',
`-fversion', and other options are passed, as appropriate, even when
the user has not explicitly specified them.  Other "internal" options
such as `-quiet' also are passed via this mechanism.


File: g77.info,  Node: Projects,  Next: Diagnostics,  Prev: Adding Options,  Up: Top

Projects
********

   If you want to contribute to `g77' by doing research, design,
specification, documentation, coding, or testing, the following
information should give you some ideas.

* Menu:

* Efficiency::               Make `g77' itself compile code faster.
* Better Optimization::      Teach `g77' to generate faster code.
* Simplify Porting::         Make `g77' easier to configure, build,
                             and install.
* More Extensions::          Features many users won't know to ask for.
* Machine Model::            `g77' should better leverage `gcc'.
* Internals Documentation::  Make maintenance easier.
* Internals Improvements::   Make internals more robust.
* Better Diagnostics::       Make using `g77' on new code easier.


File: g77.info,  Node: Efficiency,  Next: Better Optimization,  Up: Projects

Improve Efficiency
==================

   Don't bother doing any performance analysis until most of the
following items are taken care of, because there's no question they
represent serious space/time problems, although some of them show up
only given certain kinds of (popular) input.

   * Improve `malloc' package and its uses to specify more info about
     memory pools and, where feasible, use obstacks to implement them.

   * Skip over uninitialized portions of aggregate areas (arrays,
     `COMMON' areas, `EQUIVALENCE' areas) so zeros need not be output.
     This would reduce memory usage for large initialized aggregate
     areas, even ones with only one initialized element.

     As of version 0.5.18, a portion of this item has already been
     accomplished.

   * Prescan the statement (in `sta.c') so that the nature of the
     statement is determined as much as possible by looking entirely at
     its form, and not looking at any context (previous statements,
     including types of symbols).  This would allow ripping out of the
     statement-confirmation, symbol retraction/confirmation, and
     diagnostic inhibition mechanisms.  Plus, it would result in
     much-improved diagnostics.  For example, `CALL
     some-intrinsic(...)', where the intrinsic is not a subroutine
     intrinsic, would result actual error instead of the
     unimplemented-statement catch-all.

   * Throughout `g77', don't pass line/column pairs where a simple
     `ffewhere' type, which points to the error as much as is desired
     by the configuration, will do, and don't pass `ffelexToken' types
     where a simple `ffewhere' type will do.  Then, allow new default
     configuration of `ffewhere' such that the source line text is not
     preserved, and leave it to things like Emacs' next-error function
     to point to them (now that `next-error' supports column, or,
     perhaps, character-offset, numbers).  The change in calling
     sequences should improve performance somewhat, as should not
     having to save source lines.  (Whether this whole item will
     improve performance is questionable, but it should improve
     maintainability.)

   * Handle `DATA (A(I),I=1,1000000)/1000000*2/' more efficiently,
     especially as regards the assembly output.  Some of this might
     require improving the back end, but lots of improvement in
     space/time required in `g77' itself can be fairly easily obtained
     without touching the back end.  Maybe type-conversion, where
     necessary, can be speeded up as well in cases like the one shown
     (converting the `2' into `2.').

   * If analysis shows it to be worthwhile, optimize `lex.c'.

   * Consider redesigning `lex.c' to not need any feedback during
     tokenization, by keeping track of enough parse state on its own.


File: g77.info,  Node: Better Optimization,  Next: Simplify Porting,  Prev: Efficiency,  Up: Projects

Better Optimization
===================

   Much of this work should be put off until after `g77' has all the
features necessary for its widespread acceptance as a useful F77
compiler.  However, perhaps this work can be done in parallel during
the feature-adding work.

   * Do the equivalent of the trick of putting `extern inline' in front
     of every function definition in `libf2c' and #include'ing the
     resulting file in `f2c'+`gcc'--that is, inline all
     run-time-library functions that are at all worth inlining.  (Some
     of this has already been done, such as for integral
     exponentiation.)

   * When doing `CHAR_VAR = CHAR_FUNC(...)', and it's clear that types
     line up and `CHAR_VAR' is addressable or not a `VAR_DECL', make
     `CHAR_VAR', not a temporary, be the receiver for `CHAR_FUNC'.
     (This is now done for `COMPLEX' variables.)

   * Design and implement Fortran-specific optimizations that don't
     really belong in the back end, or where the front end needs to
     give the back end more info than it currently does.

   * Design and implement a new run-time library interface, with the
     code going into `libgcc' so no special linking is required to link
     Fortran programs using standard language features.  This library
     would speed up lots of things, from I/O (using precompiled formats,
     doing just one, or, at most, very few, calls for arrays or array
     sections, and so on) to general computing (array/section
     implementations of various intrinsics, implementation of commonly
     performed loops that aren't likely to be optimally compiled
     otherwise, etc.).

     Among the important things the library would do are:

        * Be a one-stop-shop-type library, hence shareable and usable
          by all, in that what are now library-build-time options in
          `libf2c' would be moved at least to the `g77' compile phase,
          if not to finer grains (such as choosing how list-directed
          I/O formatting is done by default at `OPEN' time, for
          preconnected units via options or even statements in the main
          program unit, maybe even on a per-I/O basis with appropriate
          pragma-like devices).

   * Probably requiring the new library design, change interface to
     normally have `COMPLEX' functions return their values in the way
     `gcc' would if they were declared `__complex__ float', rather than
     using the mechanism currently used by `CHARACTER' functions
     (whereby the functions are compiled as returning void and their
     first arg is a pointer to where to store the result).  (Don't
     append underscores to external names for `COMPLEX' functions in
     some cases once `g77' uses `gcc' rather than `f2c' calling
     conventions.)

   * Do something useful with `doiter' references where possible.  For
     example, `CALL FOO(I)' cannot modify `I' if within a `DO' loop
     that uses `I' as the iteration variable, and the back end might
     find that info useful in determining whether it needs to read `I'
     back into a register after the call.  (It normally has to do that,
     unless it knows `FOO' never modifies its passed-by-reference
     argument, which is rarely the case for Fortran-77 code.)


File: g77.info,  Node: Simplify Porting,  Next: More Extensions,  Prev: Better Optimization,  Up: Projects

Simplify Porting
================

   Making `g77' easier to configure, port, build, and install, either
as a single-system compiler or as a cross-compiler, would be very
useful.

   * A new library (replacing `libf2c') should improve portability as
     well as produce more optimal code.  Further, `g77' and the new
     library should conspire to simplify naming of externals, such as
     by removing unnecessarily added underscores, and to
     reduce/eliminate the possibility of naming conflicts, while making
     debugger more straightforward.

     Also, it should make multi-language applications more feasible,
     such as by providing Fortran intrinsics that get Fortran unit
     numbers given C `FILE *' descriptors.

   * Possibly related to a new library, `g77' should produce the
     equivalent of a `gcc' `main(argc, argv)' function when it compiles
     a main program unit, instead of compiling something that must be
     called by a library implementation of `main()'.

     This would do many useful things such as provide more flexibility
     in terms of setting up exception handling, not requiring
     programmers to start their debugging sessions with `breakpoint
     MAIN__' followed by `run', and so on.

   * The GBE needs to understand the difference between alignment
     requirements and desires.  For example, on Intel x86 machines,
     `g77' currently imposes overly strict alignment requirements, due
     to the back end, but it would be useful for Fortran and C
     programmers to be able to override these *recommendations* as long
     as they don't violate the actual processor *requirements*.


File: g77.info,  Node: More Extensions,  Next: Machine Model,  Prev: Simplify Porting,  Up: Projects

More Extensions
===============

   These extensions are not the sort of things users ask for "by name",
but they might improve the usability of `g77', and Fortran in general,
in the long run.  Some of these items really pertain to improving `g77'
internals so that some popular extensions can be more easily supported.

   * Look through all the documentation on the GNU Fortran language,
     dialects, compiler, missing features, bugs, and so on.  Many
     mentions of incomplete or missing features are sprinkled
     throughout.  It is not worth repeating them here.

   * Support arbitrary operands for concatenation, even in contexts
     where run-time allocation is required.

   * Consider adding a `NUMERIC' type to designate typeless numeric
     constants, named and unnamed.  The idea is to provide a
     forward-looking, effective replacement for things like the
     old-style `PARAMETER' statement when people really need
     typelessness in a maintainable, portable, clearly documented way.
     Maybe `TYPELESS' would include `CHARACTER', `POINTER', and
     whatever else might come along.  (This is not really a call for
     polymorphism per se, just an ability to express limited, syntactic
     polymorphism.)

   * Support `OPEN(...,KEY=(...),...)'.

   * Support arbitrary file unit numbers, instead of limiting them to 0
     through `MXUNIT-1'.  (This is a `libf2c' issue.)

   * `OPEN(NOSPANBLOCKS,...)' is treated as
     `OPEN(UNIT=NOSPANBLOCKS,...)', so a later `UNIT=' in the first
     example is invalid.  Make sure this is what users of this feature
     would expect.

   * Currently `g77' disallows `READ(1'10)' since it is an obnoxious
     syntax, but supporting it might be pretty easy if needed.  More
     details are needed, such as whether general expressions separated
     by an apostrophe are supported, or maybe the record number can be
     a general expression, and so on.

   * Support `STRUCTURE', `UNION', `MAP', and `RECORD' fully.
     Currently there is no support at all for `%FILL' in `STRUCTURE'
     and related syntax, whereas the rest of the stuff has at least
     some parsing support.  This requires either major changes to
     `libf2c' or its replacement.

   * F90 and `g77' probably disagree about label scoping relative to
     `INTERFACE' and `END INTERFACE', and their contained procedure
     interface bodies (blocks?).

   * `ENTRY' doesn't support F90 `RESULT()' yet, since that was added
     after S8.112.

   * Empty-statement handling (10 ;;CONTINUE;;) probably isn't
     consistent with the final form of the standard (it was vague at
     S8.112).

   * It seems to be an "open" question whether a file, immediately
     after being `OPEN'ed,is positioned at the beginning, the end, or
     wherever--it might be nice to offer an option of opening to
     "undefined" status, requiring an explicit absolute-positioning
     operation to be performed before any other (besides `CLOSE') to
     assist in making applications port to systems (some IBM?) that
     `OPEN' to the end of a file or some such thing.


File: g77.info,  Node: Machine Model,  Next: Internals Documentation,  Prev: More Extensions,  Up: Projects

Machine Model
=============

   This items pertain to generalizing `g77''s view of the machine model
to more fully accept whatever the GBE provides it via its configuration.

   * Switch to using `REAL_VALUE_TYPE' to represent floating-point
     constants exclusively so the target float format need not be
     required.  This means changing the way `g77' handles
     initialization of aggregate areas having more than one type, such
     as `REAL' and `INTEGER', because currently it initializes them as
     if they were arrays of `char' and uses the bit patterns of the
     constants of the various types in them to determine what to stuff
     in elements of the arrays.

   * Rely more and more on back-end info and capabilities, especially
     in the area of constants (where having the `g77' front-end's IL
     just store the appropriate tree nodes containing constants might
     be best).

   * Suite of C and Fortran programs that a user/administrator can run
     on a machine to help determine the configuration for `g77' before
     building and help determine if the compiler works (especially with
     whatever libraries are installed) after building.


File: g77.info,  Node: Internals Documentation,  Next: Internals Improvements,  Prev: Machine Model,  Up: Projects

Internals Documentation
=======================

   Better info on how `g77' works and how to port it is needed.  Much
of this should be done only after the redesign planned for 0.6 is
complete.


File: g77.info,  Node: Internals Improvements,  Next: Better Diagnostics,  Prev: Internals Documentation,  Up: Projects

Internals Improvements
======================

   Some more items that would make `g77' more reliable and easier to
maintain:

   * Generally make expression handling focus more on critical syntax
     stuff, leaving semantics to callers.  For example, anything a
     caller can check, semantically, let it do so, rather than having
     `expr.c' do it.  (Exceptions might include things like diagnosing
     `FOO(I--K:)=BAR' where `FOO' is a `PARAMETER'--if it seems
     important to preserve the left-to-right-in-source order of
     production of diagnostics.)

   * Come up with better naming conventions for `-D' to establish
     requirements to achieve desired implementation dialect via
     `proj.h'.

   * Clean up used tokens and `ffewhere's in `ffeglobal_terminate_1'.

   * Replace `sta.c' `outpooldisp' mechanism with `malloc_pool_use'.

   * Check for `opANY' in more places in `com.c', `std.c', and `ste.c',
     and get rid of the `opCONVERT(opANY)' kludge (after determining if
     there is indeed no real need for it).

   * Utility to read and check `bad.def' messages and their references
     in the code, to make sure calls are consistent with message
     templates.

   * Search and fix `&ffe...' and similar so that `ffe...ptr...' macros
     are available instead (a good argument for wishing this could have
     written all this stuff in C++, perhaps).  On the other hand, it's
     questionable whether this sort of improvement is really necessary,
     given the availability of tools such as Emacs and Perl, which make
     finding any address-taking of structure members easy enough?

   * Some modules truly export the member names of their structures
     (and the structures themselves), maybe fix this, and fix other
     modules that just appear to as well (by appending `_', though it'd
     be ugly and probably not worth the time).

   * Implement C macros `RETURNS(value)' and `SETS(something,value)' in
     `proj.h' and use them throughout `g77' source code (especially in
     the definitions of access macros in `.h' files) so they can be
     tailored to catch code writing into a `RETURNS()' or reading from
     a `SETS()'.

   * Decorate throughout with `const' and other such stuff.

   * All F90 notational derivations in the source code are still based
     on the S8.112 version of the draft standard.  Probably should
     update to the official standard, or put documentation of the rules
     as used in the code...uh...in the code.

   * Some `ffebld_new' calls (those outside of `ffeexpr.c' or inside
     but invoked via paths not involving `ffeexpr_lhs' or
     `ffeexpr_rhs') might be creating things in improper pools, leading
     to such things staying around too long or (doubtful, but possible
     and dangerous) not long enough.

   * Some `ffebld_list_new' (or whatever) calls might not be matched by
     `ffebld_list_bottom' (or whatever) calls, which might someday
     matter.  (It definitely is not a problem just yet.)

   * Probably not doing clean things when we fail to `EQUIVALENCE'
     something due to alignment/mismatch or other problems--they end up
     without `ffestorag' objects, so maybe the backend (and other parts
     of the front end) can notice that and handle like an `opANY' (do
     what it wants, just don't complain or crash).  Most of this seems
     to have been addressed by now, but a code review wouldn't hurt.


File: g77.info,  Node: Better Diagnostics,  Prev: Internals Improvements,  Up: Projects

Better Diagnostics
==================

   These are things users might not ask about, or that need to be
looked into, before worrying about.  Also here are items that involve
reducing unnecessary diagnostic clutter.

   * When `FUNCTION' and `ENTRY' point types disagree (`CHARACTER'
     lengths, type classes, and so on), `ANY'-ize the offending `ENTRY'
     point and any *new* dummies it specifies.

   * Speed up and improve error handling for data when repeat-count is
     specified.  For example, don't output 20 unnecessary messages
     after the first necessary one for:

          INTEGER X(20)
          CONTINUE
          DATA (X(I), J= 1, 20) /20*5/
          END

     (The `CONTINUE' statement ensures the `DATA' statement is
     processed in the context of executable, not specification,
     statements.)


File: g77.info,  Node: Diagnostics,  Next: Index,  Prev: Projects,  Up: Top

Diagnostics
***********

   Some diagnostics produced by `g77' require sufficient explanation
that the explanations are given below, and the diagnostics themselves
identify the appropriate explanation.

   Identification uses the GNU Info format--specifically, the `info'
command that displays the explanation is given within square brackets
in the diagnostic.  For example:

     foo.f:5: Invalid statement [info -f g77 M FOOEY]

   More details about the above diagnostic is found in the `g77' Info
documentation, menu item `M', submenu item `FOOEY', which is displayed
by typing the UNIX command `info -f g77 M FOOEY'.

   Other Info readers, such as EMACS, may be just as easily used to
display the pertinent node.  In the above example, `g77' is the Info
document name, `M' is the top-level menu item to select, and, in that
node (named `Diagnostics', the name of this chapter, which is the very
text you're reading now), `FOOEY' is the menu item to select.

* Menu:

* CMPAMBIG::    Ambiguous use of intrinsic.
* EXPIMP::      Intrinsic used explicitly and implicitly.
* INTGLOB::     Intrinsic also used as name of global.
* LEX::         Various lexer messages
* GLOBALS::     Disagreements about globals.


File: g77.info,  Node: CMPAMBIG,  Next: EXPIMP,  Up: Diagnostics

`CMPAMBIG'
==========

     Ambiguous use of intrinsic INTRINSIC ...

   The type of the argument to the invocation of the INTRINSIC
intrinsic is a `COMPLEX' type other than `COMPLEX(KIND=1)'.  Typically,
it is `COMPLEX(KIND=2)', also known as `DOUBLE COMPLEX'.

   The interpretation of this invocation depends on the particular
dialect of Fortran for which the code was written.  Some dialects
convert the real part of the argument to `REAL(KIND=1)', thus losing
precision; other dialects, and Fortran 90, do no such conversion.

   So, GNU Fortran rejects such invocations except under certain
circumstances, to avoid making an incorrect assumption that results in
generating the wrong code.

   To determine the dialect of the program unit, perhaps even whether
that particular invocation is properly coded, determine how the result
of the intrinsic is used.

   The result of INTRINSIC is expected (by the original programmer) to
be `REAL(KIND=1)' (the non-Fortran-90 interpretation) if:

   * It is passed as an argument to a procedure that explicitly or
     implicitly declares that argument `REAL(KIND=1)'.

     For example, a procedure with no `DOUBLE PRECISION' or `IMPLICIT
     DOUBLE PRECISION' statement specifying the dummy argument
     corresponding to an actual argument of `REAL(Z)', where `Z' is
     declared `DOUBLE COMPLEX', strongly suggests that the programmer
     expected `REAL(Z)' to return `REAL(KIND=1)' instead of
     `REAL(KIND=2)'.

   * It is used in a context that would otherwise not include any
     `REAL(KIND=2)' but where treating the INTRINSIC invocation as
     `REAL(KIND=2)' would result in unnecessary promotions and
     (typically) more expensive operations on the wider type.

     For example:

          DOUBLE COMPLEX Z
          ...
          R(1) = T * REAL(Z)

     The above example suggests the programmer expected the real part
     of `Z' to be converted to `REAL(KIND=1)' before being multiplied
     by `T' (presumed, along with `R' above, to be type `REAL(KIND=1)').

     Otherwise, the conversion would have to be delayed until after the
     multiplication, requiring not only an extra conversion (of `T' to
     `REAL(KIND=2)'), but a (typically) more expensive multiplication
     (a double-precision multiplication instead of a single-precision
     one).

   The result of INTRINSIC is expected (by the original programmer) to
be `REAL(KIND=2)' (the Fortran 90 interpretation) if:

   * It is passed as an argument to a procedure that explicitly or
     implicitly declares that argument `REAL(KIND=2)'.

     For example, a procedure specifying a `DOUBLE PRECISION' dummy
     argument corresponding to an actual argument of `REAL(Z)', where
     `Z' is declared `DOUBLE COMPLEX', strongly suggests that the
     programmer expected `REAL(Z)' to return `REAL(KIND=2)' instead of
     `REAL(KIND=1)'.

   * It is used in an expression context that includes other
     `REAL(KIND=2)' operands, or is assigned to a `REAL(KIND=2)'
     variable or array element.

     For example:

          DOUBLE COMPLEX Z
          DOUBLE PRECISION R, T
          ...
          R(1) = T * REAL(Z)

     The above example suggests the programmer expected the real part
     of `Z' to *not* be converted to `REAL(KIND=1)' by the `REAL()'
     intrinsic.

     Otherwise, the conversion would have to be immediately followed by
     a conversion back to `REAL(KIND=2)', losing the original, full
     precision of the real part of `Z', before being multiplied by `T'.

   Once you have determined whether a particular invocation of INTRINSIC
expects the Fortran 90 interpretation, you can:

   * Change it to `DBLE(EXPR)' (if INTRINSIC is `REAL') or
     `DIMAG(EXPR)' (if INTRINSIC is `AIMAG') if it expected the Fortran
     90 interpretation.

     This assumes EXPR is `COMPLEX(KIND=2)'--if it is some other type,
     such as `COMPLEX*32', you should use the appropriate intrinsic,
     such as the one to convert to `REAL*16' (perhaps `DBLEQ()' in
     place of `DBLE()', and `QIMAG()' in place of `DIMAG()').

   * Change it to `REAL(INTRINSIC(EXPR))', otherwise.  This converts to
     `REAL(KIND=1)' in all working Fortran compilers.

   If you don't want to change the code, and you are certain that all
ambiguous invocations of INTRINSIC in the source file have the same
expectation regarding interpretation, you can:

   * Compile with the `g77' option `-ff90', to enable the Fortran 90
     interpretation.

   * Compile with the `g77' options `-fno-f90 -fugly-complex', to
     enable the non-Fortran-90 interpretations.

   *Note REAL() and AIMAG() of Complex::, for more information on this
issue.

   Note: If the above suggestions don't produce enough evidence as to
whether a particular program expects the Fortran 90 interpretation of
this ambiguous invocation of INTRINSIC, there is one more thing you can
try.

   If you have access to most or all the compilers used on the program
to create successfully tested and deployed executables, read the
documentation for, and *also* test out, each compiler to determine how
it treats the INTRINSIC intrinsic in this case.  (If all the compilers
don't agree on an interpretation, there might be lurking bugs in the
deployed versions of the program.)

   The following sample program might help:

           PROGRAM JCB003
     C
     C Written by James Craig Burley 1997-02-23.
     C Contact via Internet email: burley@gnu.org
     C
     C Determine how compilers handle non-standard REAL
     C and AIMAG on DOUBLE COMPLEX operands.
     C
           DOUBLE COMPLEX Z
           REAL R
           Z = (3.3D0, 4.4D0)
           R = Z
           CALL DUMDUM(Z, R)
           R = REAL(Z) - R
           IF (R .NE. 0.) PRINT *, 'REAL() is Fortran 90'
           IF (R .EQ. 0.) PRINT *, 'REAL() is not Fortran 90'
           R = 4.4D0
           CALL DUMDUM(Z, R)
           R = AIMAG(Z) - R
           IF (R .NE. 0.) PRINT *, 'AIMAG() is Fortran 90'
           IF (R .EQ. 0.) PRINT *, 'AIMAG() is not Fortran 90'
           END
     C
     C Just to make sure compiler doesn't use naive flow
     C analysis to optimize away careful work above,
     C which might invalidate results....
     C
           SUBROUTINE DUMDUM(Z, R)
           DOUBLE COMPLEX Z
           REAL R
           END

   If the above program prints contradictory results on a particular
compiler, run away!


File: g77.info,  Node: EXPIMP,  Next: INTGLOB,  Prev: CMPAMBIG,  Up: Diagnostics

`EXPIMP'
========

     Intrinsic INTRINSIC referenced ...

   The INTRINSIC is explicitly declared in one program unit in the
source file and implicitly used as an intrinsic in another program unit
in the same source file.

   This diagnostic is designed to catch cases where a program might
depend on using the name INTRINSIC as an intrinsic in one program unit
and as a global name (such as the name of a subroutine or function) in
another, but `g77' recognizes the name as an intrinsic in both cases.

   After verifying that the program unit making implicit use of the
intrinsic is indeed written expecting the intrinsic, add an `INTRINSIC
INTRINSIC' statement to that program unit to prevent this warning.

   This and related warnings are disabled by using the `-Wno-globals'
option when compiling.

   Note that this warning is not issued for standard intrinsics.
Standard intrinsics include those described in the FORTRAN 77 standard
and, if `-ff90' is specified, those described in the Fortran 90
standard.  Such intrinsics are not as likely to be confused with user
procedures as intrinsics provided as extensions to the standard by
`g77'.


File: g77.info,  Node: INTGLOB,  Next: LEX,  Prev: EXPIMP,  Up: Diagnostics

`INTGLOB'
=========

     Same name `INTRINSIC' given ...

   The name INTRINSIC is used for a global entity (a common block or a
program unit) in one program unit and implicitly used as an intrinsic
in another program unit.

   This diagnostic is designed to catch cases where a program intends
to use a name entirely as a global name, but `g77' recognizes the name
as an intrinsic in the program unit that references the name, a
situation that would likely produce incorrect code.

   For example:

     INTEGER FUNCTION TIME()
     ...
     END
     ...
     PROGRAM SAMP
     INTEGER TIME
     PRINT *, 'Time is ', TIME()
     END

   The above example defines a program unit named `TIME', but the
reference to `TIME' in the main program unit `SAMP' is normally treated
by `g77' as a reference to the intrinsic `TIME()' (unless a
command-line option that prevents such treatment has been specified).

   As a result, the program `SAMP' will *not* invoke the `TIME'
function in the same source file.

   Since `g77' recognizes `libU77' procedures as intrinsics, and since
some existing code uses the same names for its own procedures as used
by some `libU77' procedures, this situation is expected to arise often
enough to make this sort of warning worth issuing.

   After verifying that the program unit making implicit use of the
intrinsic is indeed written expecting the intrinsic, add an `INTRINSIC
INTRINSIC' statement to that program unit to prevent this warning.

   Or, if you believe the program unit is designed to invoke the
program-defined procedure instead of the intrinsic (as recognized by
`g77'), add an `EXTERNAL INTRINSIC' statement to the program unit that
references the name to prevent this warning.

   This and related warnings are disabled by using the `-Wno-globals'
option when compiling.

   Note that this warning is not issued for standard intrinsics.
Standard intrinsics include those described in the FORTRAN 77 standard
and, if `-ff90' is specified, those described in the Fortran 90
standard.  Such intrinsics are not as likely to be confused with user
procedures as intrinsics provided as extensions to the standard by
`g77'.


File: g77.info,  Node: LEX,  Next: GLOBALS,  Prev: INTGLOB,  Up: Diagnostics

`LEX'
=====

     Unrecognized character ...
     Invalid first character ...
     Line too long ...
     Non-numeric character ...
     Continuation indicator ...
     Label at ... invalid with continuation line indicator ...
     Character constant ...
     Continuation line ...
     Statement at ... begins with invalid token

   Although the diagnostics identify specific problems, they can be
produced when general problems such as the following occur:

   * The source file contains something other than Fortran code.

     If the code in the file does not look like many of the examples
     elsewhere in this document, it might not be Fortran code.  (Note
     that Fortran code often is written in lower case letters, while
     the examples in this document use upper case letters, for
     stylistic reasons.)

     For example, if the file contains lots of strange-looking
     characters, it might be APL source code; if it contains lots of
     parentheses, it might be Lisp source code; if it contains lots of
     bugs, it might be C++ source code.

   * The source file contains free-form Fortran code, but `-ffree-form'
     was not specified on the command line to compile it.

     Free form is a newer form for Fortran code.  The older, classic
     form is called fixed form.

     Fixed-form code is visually fairly distinctive, because numerical
     labels and comments are all that appear in the first five columns
     of a line, the sixth column is reserved to denote continuation
     lines, and actual statements start at or beyond column 7.  Spaces
     generally are not significant, so if you see statements such as
     `REALX,Y' and `DO10I=1,100', you are looking at fixed-form code.
     Comment lines are indicated by the letter `C' or the symbol `*' in
     column 1.  (Some code uses `!' or `/*' to begin in-line comments,
     which many compilers support.)

     Free-form code is distinguished from fixed-form source primarily
     by the fact that statements may start anywhere.  (If lots of
     statements start in columns 1 through 6, that's a strong indicator
     of free-form source.)  Consecutive keywords must be separated by
     spaces, so `REALX,Y' is not valid, while `REAL X,Y' is.  There are
     no comment lines per se, but `!' starts a comment anywhere in a
     line (other than within a character or hollerith constant).

     *Note Source Form::, for more information.

   * The source file is in fixed form and has been edited without
     sensitivity to the column requirements.

     Statements in fixed-form code must be entirely contained within
     columns 7 through 72 on a given line.  Starting them "early" is
     more likely to result in diagnostics than finishing them "late",
     though both kinds of errors are often caught at compile time.

     For example, if the following code fragment is edited by following
     the commented instructions literally, the result, shown afterward,
     would produce a diagnostic when compiled:

          C On XYZZY systems, remove "C" on next line:
          C     CALL XYZZY_RESET

     The result of editing the above line might be:

          C On XYZZY systems, remove "C" on next line:
               CALL XYZZY_RESET

     However, that leaves the first `C' in the `CALL' statement in
     column 6, making it a comment line, which is not really what the
     author intended, and which is likely to result in one of the
     above-listed diagnostics.

     *Replacing* the `C' in column 1 with a space is the proper change
     to make, to ensure the `CALL' keyword starts in or after column 7.

     Another common mistake like this is to forget that fixed-form
     source lines are significant through only column 72, and that,
     normally, any text beyond column 72 is ignored or is diagnosed at
     compile time.

     *Note Source Form::, for more information.

   * The source file requires preprocessing, and the preprocessing is
     not being specified at compile time.

     A source file containing lines beginning with `#define',
     `#include', `#if', and so on is likely one that requires
     preprocessing.

     If the file's suffix is `.f' or `.for', the file will normally be
     compiled *without* preprocessing by `g77'.

     Change the file's suffix from `.f' to `.F' (or, on systems with
     case-insensitive file names, to `.fpp') or from `.for' to `.fpp'.
     `g77' compiles files with such names *with* preprocessing.

     Or, learn how to use `gcc''s `-x' option to specify the language
     `f77-cpp-input' for Fortran files that require preprocessing.
     *Note gcc: (Using and Porting GNU CC)Overall Options.

   * The source file is preprocessed, and the results of preprocessing
     result in syntactic errors that are not necessarily obvious to
     someone examining the source file itself.

     Examples of errors resulting from preprocessor macro expansion
     include exceeding the line-length limit, improperly starting,
     terminating, or incorporating the apostrophe or double-quote in a
     character constant, improperly forming a hollerith constant, and
     so on.

     *Note Options Controlling the Kind of Output: Overall Options, for
     suggestions about how to use, and not use, preprocessing for
     Fortran code.


File: g77.info,  Node: GLOBALS,  Prev: LEX,  Up: Diagnostics

`GLOBALS'
=========

     Global name NAME defined at ... already defined...
     Global name NAME at ... has different type...
     Too many arguments passed to NAME at ...
     Too few arguments passed to NAME at ...
     Argument #N of NAME is ...

   These messages all identify disagreements about the global procedure
named NAME among different program units (usually including NAME
itself).

   These disagreements, if not diagnosed, could result in a compiler
crash if the compiler attempted to inline a reference to NAME within a
calling program unit that disagreed with the NAME program unit
regarding whether the procedure is a subroutine or function, the type
of the return value of the procedure (if it is a function), the number
of arguments the procedure accepts, or the type of each argument.

   Such disagreements *should* be fixed in the Fortran code itself.
However, if that is not immediately practical, and the code has been
working for some time, it is possible it will work when compiled by
`g77' with the `-fno-globals' option.

   The `-fno-globals' option disables these diagnostics, and also
disables all inlining of references to global procedures to avoid
compiler crashes.  The diagnostics are actually produced, but as
warnings, unless the `-Wno-globals' option also is specified.

   After using `-fno-globals' to work around these problems, it is wise
to stop using that option and address them by fixing the Fortran code,
because such problems, while they might not actually result in bugs on
some systems, indicate that the code is not as portable as it could be.
In particular, the code might appear to work on a particular system,
but have bugs that affect the reliability of the data without
exhibiting any other outward manifestations of the bugs.


File: g77.info,  Node: Index,  Prev: Diagnostics,  Up: Top

Index
*****

* Menu:

* "infinite spaces" printed:             Strange Behavior at Run Time.
* #define:                               Overall Options.
* #if:                                   Overall Options.
* #include:                              Overall Options.
* #include directive:                    Bug Reporting.
* $:                                     Dollar Signs.
* %DESCR() construct:                    %DESCR().
* %LOC() construct:                      %LOC().
* %REF() construct:                      %REF().
* %VAL() construct:                      %VAL().
* *N notation <1>:                       Compiler Types.
* *N notation:                           Star Notation.
* --driver option <1>:                   G77 and GCC.
* --driver option:                       Invoking G77.
* -falias-check option <1>:              Code Gen Options.
* -falias-check option:                  Aliasing Assumed To Work.
* -fargument-alias option <1>:           Aliasing Assumed To Work.
* -fargument-alias option:               Code Gen Options.
* -fargument-noalias option <1>:         Code Gen Options.
* -fargument-noalias option:             Aliasing Assumed To Work.
* -fbadu77-intrinsics-delete option:     Fortran Dialect Options.
* -fbadu77-intrinsics-disable option:    Fortran Dialect Options.
* -fbadu77-intrinsics-enable option:     Fortran Dialect Options.
* -fbadu77-intrinsics-hide option:       Fortran Dialect Options.
* -fcaller-saves option:                 Optimize Options.
* -fcase-initcap option:                 Fortran Dialect Options.
* -fcase-lower option:                   Fortran Dialect Options.
* -fcase-preserve option:                Fortran Dialect Options.
* -fcase-strict-lower option:            Fortran Dialect Options.
* -fcase-strict-upper option:            Fortran Dialect Options.
* -fcase-upper option:                   Fortran Dialect Options.
* -fdebug-kludge option:                 Code Gen Options.
* -fdelayed-branch option:               Optimize Options.
* -fdollar-ok option:                    Fortran Dialect Options.
* -fexpensive-optimizations option:      Optimize Options.
* -ff2c-intrinsics-delete option:        Fortran Dialect Options.
* -ff2c-intrinsics-disable option:       Fortran Dialect Options.
* -ff2c-intrinsics-enable option:        Fortran Dialect Options.
* -ff2c-intrinsics-hide option:          Fortran Dialect Options.
* -ff2c-library option:                  Code Gen Options.
* -ff66 option:                          Shorthand Options.
* -ff77 option:                          Shorthand Options.
* -ff90 option:                          Fortran Dialect Options.
* -ff90-intrinsics-delete option:        Fortran Dialect Options.
* -ff90-intrinsics-disable option:       Fortran Dialect Options.
* -ff90-intrinsics-enable option:        Fortran Dialect Options.
* -ff90-intrinsics-hide option:          Fortran Dialect Options.
* -ffast-math option:                    Optimize Options.
* -ffixed-line-length-N option:          Fortran Dialect Options.
* -ffloat-store option:                  Optimize Options.
* -fforce-addr option:                   Optimize Options.
* -fforce-mem option:                    Optimize Options.
* -ffree-form option:                    Fortran Dialect Options.
* -fgnu-intrinsics-delete option:        Fortran Dialect Options.
* -fgnu-intrinsics-disable option:       Fortran Dialect Options.
* -fgnu-intrinsics-enable option:        Fortran Dialect Options.
* -fgnu-intrinsics-hide option:          Fortran Dialect Options.
* -fGROUP-intrinsics-hide option:        Overly Convenient Options.
* -finit-local-zero option <1>:          Code Gen Options.
* -finit-local-zero option:              Overly Convenient Options.
* -fintrin-case-any option:              Fortran Dialect Options.
* -fintrin-case-initcap option:          Fortran Dialect Options.
* -fintrin-case-lower option:            Fortran Dialect Options.
* -fintrin-case-upper option:            Fortran Dialect Options.
* -fmatch-case-any option:               Fortran Dialect Options.
* -fmatch-case-initcap option:           Fortran Dialect Options.
* -fmatch-case-lower option:             Fortran Dialect Options.
* -fmatch-case-upper option:             Fortran Dialect Options.
* -fmil-intrinsics-delete option:        Fortran Dialect Options.
* -fmil-intrinsics-disable option:       Fortran Dialect Options.
* -fmil-intrinsics-enable option:        Fortran Dialect Options.
* -fmil-intrinsics-hide option:          Fortran Dialect Options.
* -fno-argument-noalias-global option <1>: Code Gen Options.
* -fno-argument-noalias-global option:   Aliasing Assumed To Work.
* -fno-automatic option <1>:             Code Gen Options.
* -fno-automatic option:                 Overly Convenient Options.
* -fno-backslash option:                 Fortran Dialect Options.
* -fno-common option:                    Code Gen Options.
* -fno-emulate-complex option:           Code Gen Options.
* -fno-f2c option <1>:                   Avoid f2c Compatibility.
* -fno-f2c option:                       Code Gen Options.
* -fno-f77 option:                       Shorthand Options.
* -fno-fixed-form option:                Fortran Dialect Options.
* -fno-globals option:                   Code Gen Options.
* -fno-ident option:                     Code Gen Options.
* -fno-inline option:                    Optimize Options.
* -fno-move-all-movables option:         Optimize Options.
* -fno-reduce-all-givs option:           Optimize Options.
* -fno-rerun-loop-opt option:            Optimize Options.
* -fno-second-underscore:                f2c Skeletons and Prototypes.
* -fno-second-underscore option <1>:     Code Gen Options.
* -fno-second-underscore option:         Names.
* -fno-silent option:                    Overall Options.
* -fno-ugly option:                      Shorthand Options.
* -fno-ugly-args option:                 Fortran Dialect Options.
* -fno-ugly-init option:                 Fortran Dialect Options.
* -fno-underscoring option <1>:          Names.
* -fno-underscoring option:              Code Gen Options.
* -fonetrip option:                      Fortran Dialect Options.
* -fpack-struct option:                  Code Gen Options.
* -fpcc-struct-return option:            Code Gen Options.
* -fpedantic option:                     Warning Options.
* -fPIC option:                          Actual Bugs.
* -freg-struct-return option:            Code Gen Options.
* -frerun-cse-after-loop option:         Optimize Options.
* -fschedule-insns option:               Optimize Options.
* -fschedule-insns2 option:              Optimize Options.
* -fset-g77-defaults option:             Overall Options.
* -fshort-double option:                 Code Gen Options.
* -fsource-case-lower option:            Fortran Dialect Options.
* -fsource-case-preserve option:         Fortran Dialect Options.
* -fsource-case-upper option:            Fortran Dialect Options.
* -fstrength-reduce option:              Optimize Options.
* -fsymbol-case-any option:              Fortran Dialect Options.
* -fsymbol-case-initcap option:          Fortran Dialect Options.
* -fsymbol-case-lower option:            Fortran Dialect Options.
* -fsymbol-case-upper option:            Fortran Dialect Options.
* -fsyntax-only option:                  Warning Options.
* -ftypeless-boz option:                 Fortran Dialect Options.
* -fugly option <1>:                     Overly Convenient Options.
* -fugly option:                         Shorthand Options.
* -fugly-assign option:                  Fortran Dialect Options.
* -fugly-assumed option:                 Fortran Dialect Options.
* -fugly-comma option:                   Fortran Dialect Options.
* -fugly-complex option:                 Fortran Dialect Options.
* -fugly-logint option:                  Fortran Dialect Options.
* -funix-intrinsics-delete option:       Fortran Dialect Options.
* -funix-intrinsics-disable option:      Fortran Dialect Options.
* -funix-intrinsics-enable option:       Fortran Dialect Options.
* -funix-intrinsics-hide option:         Fortran Dialect Options.
* -funroll-all-loops option:             Optimize Options.
* -funroll-loops option:                 Optimize Options.
* -fversion option:                      Overall Options.
* -fvxt option:                          Fortran Dialect Options.
* -fvxt-intrinsics-delete option:        Fortran Dialect Options.
* -fvxt-intrinsics-disable option:       Fortran Dialect Options.
* -fvxt-intrinsics-enable option:        Fortran Dialect Options.
* -fvxt-intrinsics-hide option:          Fortran Dialect Options.
* -fzeros option:                        Code Gen Options.
* -g option:                             Debugging Options.
* -I- option:                            Directory Options.
* -i8:                                   Increasing Precision/Range.
* -Idir option:                          Directory Options.
* -malign-double option <1>:             Optimize Options.
* -malign-double option:                 Aligned Data.
* -Nl option:                            Compiler Limits.
* -Nx option:                            Compiler Limits.
* -O2 <1>:                               News.
* -O2:                                   Actual Bugs.
* -pedantic option:                      Warning Options.
* -pedantic-errors option:               Warning Options.
* -r8:                                   Increasing Precision/Range.
* -u option:                             Warning Options.
* -v option:                             G77 and GCC.
* -W option:                             Warning Options.
* -w option:                             Warning Options.
* -Waggregate-return option:             Warning Options.
* -Wall option:                          Warning Options.
* -Wcomment option:                      Warning Options.
* -Wconversion option:                   Warning Options.
* -Werror option:                        Warning Options.
* -Wformat option:                       Warning Options.
* -Wid-clash-LEN option:                 Warning Options.
* -Wimplicit option:                     Warning Options.
* -Wlarger-than-LEN option:              Warning Options.
* -Wno-globals option:                   Warning Options.
* -Wparentheses option:                  Warning Options.
* -Wredundant-decls option:              Warning Options.
* -Wshadow option:                       Warning Options.
* -Wsurprising option:                   Warning Options.
* -Wswitch option:                       Warning Options.
* -Wtraditional option:                  Warning Options.
* -Wuninitialized option:                Warning Options.
* -Wunused option:                       Warning Options.
* .EQV., with integer operands:          Equivalence Versus Equality.
* .F filename suffix:                    Overall Options.
* .fpp filename suffix:                  Overall Options.
* .gdbinit:                              Main Program Unit.
* .r filename suffix:                    Overall Options.
* /WARNINGS=DECLARATIONS switch:         Warning Options.
* 586/686 CPUs:                          Use Submodel Options.
* 64-bit systems:                        Alpha Problems Fixed.
* _strtoul:                              Missing strtoul.
* Abort intrinsic:                       Abort Intrinsic.
* Abs intrinsic:                         Abs Intrinsic.
* ACCEPT statement:                      TYPE and ACCEPT I/O Statements.
* Access intrinsic:                      Access Intrinsic.
* AChar intrinsic:                       AChar Intrinsic.
* ACos intrinsic:                        ACos Intrinsic.
* ACosD intrinsic:                       ACosD Intrinsic.
* adding options:                        Adding Options.
* adjustable arrays:                     Adjustable Arrays.
* AdjustL intrinsic:                     AdjustL Intrinsic.
* AdjustR intrinsic:                     AdjustR Intrinsic.
* aggregate initialization:              Large Initialization.
* AIMAG intrinsic:                       REAL() and AIMAG() of Complex.
* AImag intrinsic:                       AImag Intrinsic.
* AIMax0 intrinsic:                      AIMax0 Intrinsic.
* AIMin0 intrinsic:                      AIMin0 Intrinsic.
* AInt intrinsic:                        AInt Intrinsic.
* AJMax0 intrinsic:                      AJMax0 Intrinsic.
* AJMin0 intrinsic:                      AJMin0 Intrinsic.
* Alarm intrinsic:                       Alarm Intrinsic.
* aliasing:                              Aliasing Assumed To Work.
* aligned data:                          Aligned Data.
* aligned stack:                         Aligned Data.
* All intrinsic:                         All Intrinsic.
* all warnings:                          Warning Options.
* Allocated intrinsic:                   Allocated Intrinsic.
* ALog intrinsic:                        ALog Intrinsic.
* ALog10 intrinsic:                      ALog10 Intrinsic.
* Alpha:                                 Actual Bugs.
* Alpha, Digital:                        System-specific Problems.
* Alpha, support <1>:                    Actual Bugs.
* Alpha, support:                        Alpha Problems Fixed.
* alternate entry points:                Alternate Entry Points.
* alternate returns:                     Alternate Returns.
* ALWAYS_FLUSH <1>:                      Always Flush Output.
* ALWAYS_FLUSH:                          Output Assumed To Flush.
* AMax0 intrinsic:                       AMax0 Intrinsic.
* AMax1 intrinsic:                       AMax1 Intrinsic.
* AMin0 intrinsic:                       AMin0 Intrinsic.
* AMin1 intrinsic:                       AMin1 Intrinsic.
* AMod intrinsic:                        AMod Intrinsic.
* ampersand continuation line:           Ampersands.
* AND intrinsic:                         Bit Operations on Floating-point Data.
* And intrinsic:                         And Intrinsic.
* ANInt intrinsic:                       ANInt Intrinsic.
* ANSI FORTRAN 77 standard:              Language.
* ANSI FORTRAN 77 support:               Standard Support.
* anti-aliasing:                         Aliasing Assumed To Work.
* Any intrinsic:                         Any Intrinsic.
* arguments, null:                       Ugly Null Arguments.
* arguments, omitting:                   Ugly Null Arguments.
* arguments, unused <1>:                 Warning Options.
* arguments, unused:                     Unused Arguments.
* array bounds, adjustable:              Array Bounds Expressions.
* array elements, in adjustable array bounds: Array Bounds Expressions.
* array ordering:                        Arrays.
* arrays:                                Arrays.
* arrays, adjustable:                    Adjustable Arrays.
* arrays, assumed-size:                  Ugly Assumed-Size Arrays.
* arrays, automatic <1>:                 Overly Convenient Options.
* arrays, automatic <2>:                 Adjustable Arrays.
* arrays, automatic <3>:                 Large Automatic Arrays.
* arrays, automatic:                     Stack Overflow.
* arrays, dimensioning:                  Adjustable Arrays.
* as command:                            What is GNU Fortran?.
* ASin intrinsic:                        ASin Intrinsic.
* ASinD intrinsic:                       ASinD Intrinsic.
* assembler:                             What is GNU Fortran?.
* assembly code:                         What is GNU Fortran?.
* assembly code, invalid:                Bug Criteria.
* ASSIGN statement <1>:                  Ugly Assigned Labels.
* ASSIGN statement:                      Assigned Statement Labels.
* assigned labels:                       Ugly Assigned Labels.
* assigned statement labels:             Assigned Statement Labels.
* Associated intrinsic:                  Associated Intrinsic.
* association, storage:                  Aliasing Assumed To Work.
* assumed-size arrays:                   Ugly Assumed-Size Arrays.
* ATan intrinsic:                        ATan Intrinsic.
* ATan2 intrinsic:                       ATan2 Intrinsic.
* ATan2D intrinsic:                      ATan2D Intrinsic.
* ATanD intrinsic:                       ATanD Intrinsic.
* automatic arrays <1>:                  Overly Convenient Options.
* automatic arrays <2>:                  Large Automatic Arrays.
* automatic arrays <3>:                  Adjustable Arrays.
* automatic arrays:                      Stack Overflow.
* AXP:                                   System-specific Problems.
* back end, gcc:                         What is GNU Fortran?.
* backslash <1>:                         Backslash in Constants.
* backslash:                             Fortran Dialect Options.
* backtrace for bug reports:             Bug Reporting.
* badu77 intrinsics:                     Fortran Dialect Options.
* badu77 intrinsics group:               Intrinsic Groups.
* basic concepts:                        What is GNU Fortran?.
* beginners:                             Getting Started.
* BesJ0 intrinsic:                       BesJ0 Intrinsic.
* BesJ1 intrinsic:                       BesJ1 Intrinsic.
* BesJN intrinsic:                       BesJN Intrinsic.
* BesY0 intrinsic:                       BesY0 Intrinsic.
* BesY1 intrinsic:                       BesY1 Intrinsic.
* BesYN intrinsic:                       BesYN Intrinsic.
* binaries, distributing:                Distributing Binaries.
* bison:                                 Missing bison?.
* bit patterns:                          Floating-point Bit Patterns.
* Bit_Size intrinsic:                    Bit_Size Intrinsic.
* BITest intrinsic:                      BITest Intrinsic.
* BJTest intrinsic:                      BJTest Intrinsic.
* blanks (spaces) <1>:                   Lines.
* blanks (spaces):                       Character Set.
* block data:                            Multiple Definitions of External Names.
* block data and libraries:              Block Data and Libraries.
* BLOCK DATA statement <1>:              Multiple Definitions of External Names.
* BLOCK DATA statement:                  Block Data and Libraries.
* bootstrap build:                       Bootstrap Build.
* BTest intrinsic:                       BTest Intrinsic.
* bug criteria:                          Bug Criteria.
* bug report mailing lists:              Bug Lists.
* bugs:                                  Bugs.
* bugs, finding:                         What is GNU Fortran?.
* bugs, known:                           Trouble.
* build, bootstrap:                      Bootstrap Build.
* build, straight:                       Straight Build.
* building g77:                          Building gcc.
* building gcc <1>:                      Building GNU CC Necessary.
* building gcc:                          Building gcc.
* bus error <1>:                         Strange Behavior at Run Time.
* bus error:                             NeXTStep Problems.
* but-bugs:                              But-bugs.
* C library:                             Strange Behavior at Run Time.
* C preprocessor:                        Overall Options.
* C routines calling Fortran:            Debugging and Interfacing.
* C++:                                   C++ Considerations.
* C++, linking with:                     Interoperating with C and C++.
* C, linking with:                       Interoperating with C and C++.
* CAbs intrinsic:                        CAbs Intrinsic.
* calling C routines:                    Debugging and Interfacing.
* card image:                            Fortran Dialect Options.
* carriage returns:                      Carriage Returns.
* case sensitivity:                      Case Sensitivity.
* cc1 program:                           What is GNU Fortran?.
* cc1plus program:                       What is GNU Fortran?.
* CCos intrinsic:                        CCos Intrinsic.
* CDAbs intrinsic:                       CDAbs Intrinsic.
* CDCos intrinsic:                       CDCos Intrinsic.
* CDExp intrinsic:                       CDExp Intrinsic.
* CDLog intrinsic:                       CDLog Intrinsic.
* CDSin intrinsic:                       CDSin Intrinsic.
* CDSqRt intrinsic:                      CDSqRt Intrinsic.
* Ceiling intrinsic:                     Ceiling Intrinsic.
* CExp intrinsic:                        CExp Intrinsic.
* cfortran.h:                            C Interfacing Tools.
* changes, user-visible:                 Changes.
* Char intrinsic:                        Char Intrinsic.
* character constants <1>:               Character and Hollerith Constants.
* character constants <2>:               Fortran Dialect Options.
* character constants <3>:               Double Quote Meaning.
* character constants:                   Ugly Conversion of Initializers.
* character set:                         Fortran Dialect Options.
* CHARACTER*(*):                         More Extensions.
* CHARACTER, null:                       Character Type.
* characters:                            Character Set.
* characters, comment:                   Exclamation Point.
* characters, continuation:              Exclamation Point.
* ChDir intrinsic <1>:                   ChDir Intrinsic (subroutine).
* ChDir intrinsic:                       ChDir Intrinsic (function).
* ChMod intrinsic <1>:                   ChMod Intrinsic (function).
* ChMod intrinsic:                       ChMod Intrinsic (subroutine).
* CLog intrinsic:                        CLog Intrinsic.
* CLOSE statement:                       OPEN CLOSE and INQUIRE Keywords.
* Cmplx intrinsic:                       Cmplx Intrinsic.
* CMPLX intrinsic:                       CMPLX() of DOUBLE PRECISION.
* code generation conventions:           Code Gen Options.
* code generation, improving:            Better Optimization.
* code generator:                        What is GNU Fortran?.
* code, assembly:                        What is GNU Fortran?.
* code, displaying main source:          Actual Bugs.
* code, distributing:                    Distributing Binaries.
* code, in-line:                         What is GNU Fortran?.
* code, legacy:                          Collected Fortran Wisdom.
* code, machine:                         What is GNU Fortran?.
* code, modifying <1>:                   Unpacking.
* code, modifying:                       Overall Options.
* code, source <1>:                      Case Sensitivity.
* code, source <2>:                      Lines.
* code, source <3>:                      Source Form.
* code, source <4>:                      Unpacking.
* code, source:                          What is GNU Fortran?.
* code, stack variables:                 Maximum Stackable Size.
* code, user:                            Cannot Link Fortran Programs.
* code, writing:                         Collected Fortran Wisdom.
* column-major ordering:                 Arrays.
* columns 73 through 80:                 Better Source Model.
* command options:                       Invoking G77.
* commands, as:                          What is GNU Fortran?.
* commands, f77:                         Installing f77.
* commands, g77 <1>:                     What is GNU Fortran?.
* commands, g77:                         G77 and GCC.
* commands, gcc <1>:                     G77 and GCC.
* commands, gcc:                         What is GNU Fortran?.
* commands, gdb:                         What is GNU Fortran?.
* commands, ld:                          What is GNU Fortran?.
* commas, trailing:                      Ugly Null Arguments.
* comment character:                     Exclamation Point.
* comments, trailing:                    Statements Comments Lines.
* common blocks <1>:                     Debugging Options.
* common blocks <2>:                     Common Blocks.
* common blocks <3>:                     Actual Bugs.
* common blocks <4>:                     Mangling of Names.
* common blocks:                         Actual Bugs.
* common blocks, large:                  Large Common Blocks.
* COMMON statement <1>:                  Multiple Definitions of External Names.
* COMMON statement:                      Common Blocks.
* COMMON, layout:                        Aligned Data.
* comparing logical expressions:         Equivalence Versus Equality.
* compatibility, f2c <1>:                Shorthand Options.
* compatibility, f2c <2>:                Overall Options.
* compatibility, f2c <3>:                Block Data and Libraries.
* compatibility, f2c <4>:                Code Gen Options.
* compatibility, f2c:                    Avoid f2c Compatibility.
* compatibility, f77:                    Shorthand Options.
* compatibility, FORTRAN 66 <1>:         Fortran Dialect Options.
* compatibility, FORTRAN 66:             Shorthand Options.
* compatibility, FORTRAN 77:             Standard Support.
* compatibility, Fortran 90:             Fortran 90.
* compilation status:                    Overall Options.
* compilation, in-line:                  Optimize Options.
* compilation, pedantic:                 Pedantic Compilation.
* compiler bugs, reporting:              Bug Reporting.
* compiler limits:                       Compiler Limits.
* compiler memory usage:                 Actual Bugs.
* compiler speed:                        Actual Bugs.
* compilers:                             What is GNU Fortran?.
* compiling programs:                    G77 and GCC.
* Complex intrinsic:                     Complex Intrinsic.
* COMPLEX intrinsics:                    Fortran Dialect Options.
* COMPLEX statement:                     Complex Variables.
* COMPLEX support:                       Actual Bugs.
* complex values:                        Ugly Complex Part Extraction.
* complex variables:                     Complex Variables.
* COMPLEX(KIND=1) type:                  Compiler Types.
* COMPLEX(KIND=2) type:                  Compiler Types.
* components of g77:                     What is GNU Fortran?.
* concatenation:                         More Extensions.
* concepts, basic:                       What is GNU Fortran?.
* conformance, IEEE:                     Optimize Options.
* Conjg intrinsic:                       Conjg Intrinsic.
* constants <1>:                         Constants.
* constants:                             Compiler Constants.
* constants, character <1>:              Double Quote Meaning.
* constants, character <2>:              Character and Hollerith Constants.
* constants, character:                  Ugly Conversion of Initializers.
* constants, context-sensitive:          Context-Sensitive Constants.
* constants, Hollerith <1>:              Character and Hollerith Constants.
* constants, Hollerith <2>:              Ugly Implicit Argument Conversion.
* constants, Hollerith:                  Ugly Conversion of Initializers.
* constants, integer:                    Actual Bugs.
* constants, octal:                      Double Quote Meaning.
* constants, prefix-radix:               Fortran Dialect Options.
* constants, types:                      Fortran Dialect Options.
* construct names:                       Construct Names.
* context-sensitive constants:           Context-Sensitive Constants.
* context-sensitive intrinsics:          Context-Sensitive Intrinsicness.
* continuation character:                Exclamation Point.
* continuation line, ampersand:          Ampersands.
* continuation lines, number of:         Continuation Line.
* contributors:                          Contributors.
* conversions, nonportable:              Nonportable Conversions.
* core dump:                             Bug Criteria.
* Cos intrinsic:                         Cos Intrinsic.
* CosD intrinsic:                        CosD Intrinsic.
* CosH intrinsic:                        CosH Intrinsic.
* Count intrinsic:                       Count Intrinsic.
* cpp preprocessor:                      Overall Options.
* cpp program <1>:                       Bug Reporting.
* cpp program <2>:                       What is GNU Fortran?.
* cpp program <3>:                       Overall Options.
* cpp program:                           Preprocessor Options.
* CPU_Time intrinsic:                    CPU_Time Intrinsic.
* Cray pointers:                         POINTER Statements.
* creating patch files:                  Merging Distributions.
* credits:                               Contributors.
* cross-compiler, building:              Floating-point Bit Patterns.
* cross-compiler, problems:              Cross-compiler Problems.
* CShift intrinsic:                      CShift Intrinsic.
* CSin intrinsic:                        CSin Intrinsic.
* CSqRt intrinsic:                       CSqRt Intrinsic.
* CTime intrinsic <1>:                   CTime Intrinsic (subroutine).
* CTime intrinsic:                       CTime Intrinsic (function).
* DAbs intrinsic:                        DAbs Intrinsic.
* DACos intrinsic:                       DACos Intrinsic.
* DACosD intrinsic:                      DACosD Intrinsic.
* DASin intrinsic:                       DASin Intrinsic.
* DASinD intrinsic:                      DASinD Intrinsic.
* DATA statement <1>:                    Actual Bugs.
* DATA statement:                        Code Gen Options.
* data types:                            Compiler Types.
* data, aligned:                         Aligned Data.
* data, overwritten:                     Strange Behavior at Run Time.
* DATan intrinsic:                       DATan Intrinsic.
* DATan2 intrinsic:                      DATan2 Intrinsic.
* DATan2D intrinsic:                     DATan2D Intrinsic.
* DATanD intrinsic:                      DATanD Intrinsic.
* Date intrinsic:                        Date Intrinsic.
* Date_and_Time intrinsic:               Date_and_Time Intrinsic.
* DbesJ0 intrinsic:                      DbesJ0 Intrinsic.
* DbesJ1 intrinsic:                      DbesJ1 Intrinsic.
* DbesJN intrinsic:                      DbesJN Intrinsic.
* DbesY0 intrinsic:                      DbesY0 Intrinsic.
* DbesY1 intrinsic:                      DbesY1 Intrinsic.
* DbesYN intrinsic:                      DbesYN Intrinsic.
* Dble intrinsic:                        Dble Intrinsic.
* DbleQ intrinsic:                       DbleQ Intrinsic.
* DCmplx intrinsic:                      DCmplx Intrinsic.
* DConjg intrinsic:                      DConjg Intrinsic.
* DCos intrinsic:                        DCos Intrinsic.
* DCosD intrinsic:                       DCosD Intrinsic.
* DCosH intrinsic:                       DCosH Intrinsic.
* DDiM intrinsic:                        DDiM Intrinsic.
* debug line:                            Debug Line.
* debug_rtx:                             Bug Reporting.
* debugger <1>:                          Actual Bugs.
* debugger:                              What is GNU Fortran?.
* debugging <1>:                         Actual Bugs.
* debugging <2>:                         Names.
* debugging <3>:                         Main Program Unit.
* debugging:                             Debugging and Interfacing.
* debugging information options:         Debugging Options.
* debugging main source code:            Actual Bugs.
* DEC Alpha:                             System-specific Problems.
* DECODE statement:                      ENCODE and DECODE.
* deleted intrinsics:                    Intrinsic Groups.
* DErF intrinsic:                        DErF Intrinsic.
* DErFC intrinsic:                       DErFC Intrinsic.
* DExp intrinsic:                        DExp Intrinsic.
* DFloat intrinsic:                      DFloat Intrinsic.
* DFlotI intrinsic:                      DFlotI Intrinsic.
* DFlotJ intrinsic:                      DFlotJ Intrinsic.
* diagnostics:                           Diagnostics.
* diagnostics, incorrect:                What is GNU Fortran?.
* dialect options:                       Fortran Dialect Options.
* differences between object files:      Object File Differences.
* Digital Alpha:                         System-specific Problems.
* Digital Fortran features:              Fortran Dialect Options.
* Digits intrinsic:                      Digits Intrinsic.
* DiM intrinsic:                         DiM Intrinsic.
* DImag intrinsic:                       DImag Intrinsic.
* DIMENSION statement <1>:               Arrays.
* DIMENSION statement <2>:               Adjustable Arrays.
* DIMENSION statement:                   Array Bounds Expressions.
* DIMENSION X(1):                        Ugly Assumed-Size Arrays.
* dimensioning arrays:                   Adjustable Arrays.
* DInt intrinsic:                        DInt Intrinsic.
* direction of language development:     Direction of Language Development.
* directive, #include:                   Bug Reporting.
* directive, INCLUDE <1>:                Bug Reporting.
* directive, INCLUDE <2>:                Preprocessor Options.
* directive, INCLUDE:                    Directory Options.
* directory options:                     Directory Options.
* directory search paths for inclusion:  Directory Options.
* directory, updating info:              Updating Documentation.
* disabled intrinsics:                   Intrinsic Groups.
* disk full <1>:                         Output Assumed To Flush.
* disk full:                             Always Flush Output.
* displaying main source code:           Actual Bugs.
* disposition of files:                  OPEN CLOSE and INQUIRE Keywords.
* distensions:                           Distensions.
* distributions, unpacking:              Unpacking.
* distributions, why separate:           Merging Distributions.
* DLog intrinsic:                        DLog Intrinsic.
* DLog10 intrinsic:                      DLog10 Intrinsic.
* DMax1 intrinsic:                       DMax1 Intrinsic.
* DMin1 intrinsic:                       DMin1 Intrinsic.
* DMod intrinsic:                        DMod Intrinsic.
* DNInt intrinsic:                       DNInt Intrinsic.
* DNRM2:                                 News.
* DO loops, one-trip:                    Fortran Dialect Options.
* DO statement <1>:                      Loops.
* DO statement:                          Warning Options.
* DO WHILE:                              DO WHILE.
* documentation:                         Updating Documentation.
* dollar sign <1>:                       Dollar Signs.
* dollar sign:                           Fortran Dialect Options.
* Dot_Product intrinsic:                 Dot_Product Intrinsic.
* DOUBLE COMPLEX:                        DOUBLE COMPLEX.
* DOUBLE COMPLEX type:                   Compiler Types.
* DOUBLE PRECISION type:                 Compiler Types.
* double quotes:                         Double Quote Meaning.
* DProd intrinsic:                       DProd Intrinsic.
* DReal intrinsic:                       DReal Intrinsic.
* driver, gcc command as:                What is GNU Fortran?.
* DSign intrinsic:                       DSign Intrinsic.
* DSin intrinsic:                        DSin Intrinsic.
* DSinD intrinsic:                       DSinD Intrinsic.
* DSinH intrinsic:                       DSinH Intrinsic.
* DSqRt intrinsic:                       DSqRt Intrinsic.
* DTan intrinsic:                        DTan Intrinsic.
* DTanD intrinsic:                       DTanD Intrinsic.
* DTanH intrinsic:                       DTanH Intrinsic.
* Dtime intrinsic <1>:                   Dtime Intrinsic (function).
* Dtime intrinsic:                       Dtime Intrinsic (subroutine).
* dummies, unused:                       Warning Options.
* effecting IMPLICIT NONE:               Warning Options.
* efficiency:                            Efficiency.
* ELF support:                           Actual Bugs.
* empty CHARACTER strings:               Character Type.
* enabled intrinsics:                    Intrinsic Groups.
* ENCODE statement:                      ENCODE and DECODE.
* END DO:                                END DO.
* entry points:                          Alternate Entry Points.
* ENTRY statement:                       Alternate Entry Points.
* environment variables:                 Environment Variables.
* EOShift intrinsic:                     EOShift Intrinsic.
* Epsilon intrinsic:                     Epsilon Intrinsic.
* equivalence areas <1>:                 Actual Bugs.
* equivalence areas <2>:                 Debugging Options.
* equivalence areas <3>:                 Local Equivalence Areas.
* equivalence areas:                     Actual Bugs.
* EQUIVALENCE statement:                 Local Equivalence Areas.
* ErF intrinsic:                         ErF Intrinsic.
* ErFC intrinsic:                        ErFC Intrinsic.
* error messages <1>:                    Run-time Library Errors.
* error messages:                        Warnings and Errors.
* error messages, incorrect:             What is GNU Fortran?.
* error values:                          Run-time Library Errors.
* errors, linker:                        Large Common Blocks.
* ETime intrinsic <1>:                   ETime Intrinsic (subroutine).
* ETime intrinsic:                       ETime Intrinsic (function).
* exceptions, floating point:            Floating-point Exception Handling.
* exclamation points:                    Exclamation Point.
* executable file:                       What is GNU Fortran?.
* Exit intrinsic:                        Exit Intrinsic.
* Exp intrinsic:                         Exp Intrinsic.
* Exponent intrinsic:                    Exponent Intrinsic.
* extended-source option:                Fortran Dialect Options.
* extensions, file name:                 Overall Options.
* extensions, more:                      More Extensions.
* extensions, VXT:                       VXT Fortran.
* external names:                        Mangling of Names.
* extra warnings:                        Warning Options.
* f2c:                                   Increasing Precision/Range.
* f2c compatibility <1>:                 Debugging and Interfacing.
* f2c compatibility <2>:                 Block Data and Libraries.
* f2c compatibility <3>:                 Shorthand Options.
* f2c compatibility <4>:                 Avoid f2c Compatibility.
* f2c compatibility <5>:                 Code Gen Options.
* f2c compatibility:                     Overall Options.
* f2c intrinsics:                        Fortran Dialect Options.
* f2c intrinsics group:                  Intrinsic Groups.
* F2C_INSTALL_FLAG:                      Installing f2c.
* F2CLIBOK:                              Installing f2c.
* f77 command:                           Installing f77.
* f77 compatibility:                     Shorthand Options.
* f77 support:                           Backslash in Constants.
* f771 program:                          What is GNU Fortran?.
* f771, linking error for:               Missing strtoul.
* F77_INSTALL_FLAG:                      Installing f77.
* f90 intrinsics group:                  Intrinsic Groups.
* fatal signal:                          Bug Criteria.
* Fdate intrinsic <1>:                   Fdate Intrinsic (function).
* Fdate intrinsic:                       Fdate Intrinsic (subroutine).
* features, language:                    Direction of Language Development.
* features, ugly <1>:                    Shorthand Options.
* features, ugly <2>:                    Distensions.
* features, ugly:                        Shorthand Options.
* FFE:                                   What is GNU Fortran?.
* FFECOM_sizeMAXSTACKITEM:               Maximum Stackable Size.
* fflush() <1>:                          Always Flush Output.
* fflush():                              Output Assumed To Flush.
* FGet intrinsic <1>:                    FGet Intrinsic (subroutine).
* FGet intrinsic:                        FGet Intrinsic (function).
* FGetC intrinsic <1>:                   FGetC Intrinsic (subroutine).
* FGetC intrinsic:                       FGetC Intrinsic (function).
* file format not recognized:            What is GNU Fortran?.
* file name extension:                   Overall Options.
* file name suffix:                      Overall Options.
* file type:                             Overall Options.
* file, source:                          What is GNU Fortran?.
* files, executable:                     What is GNU Fortran?.
* files, source <1>:                     Lines.
* files, source:                         Source Form.
* fixed form <1>:                        Lines.
* fixed form <2>:                        Fortran Dialect Options.
* fixed form:                            Source Form.
* fixed-form line length:                Fortran Dialect Options.
* Float intrinsic:                       Float Intrinsic.
* FloatI intrinsic:                      FloatI Intrinsic.
* floating point exceptions:             Floating-point Exception Handling.
* floating-point bit patterns:           Floating-point Bit Patterns.
* floating-point errors:                 Floating-point Errors.
* FloatJ intrinsic:                      FloatJ Intrinsic.
* Floor intrinsic:                       Floor Intrinsic.
* Flush intrinsic:                       Flush Intrinsic.
* flushing output <1>:                   Output Assumed To Flush.
* flushing output:                       Always Flush Output.
* FNum intrinsic:                        FNum Intrinsic.
* FORMAT statement <1>:                  Expressions in FORMAT Statements.
* FORMAT statement:                      Q Edit Descriptor.
* FORTRAN 66 <1>:                        Fortran Dialect Options.
* FORTRAN 66:                            Shorthand Options.
* FORTRAN 77 compatibility:              Standard Support.
* Fortran 90 compatibility:              Fortran 90.
* Fortran 90 features:                   Fortran Dialect Options.
* Fortran 90 intrinsics:                 Fortran Dialect Options.
* Fortran 90 support:                    Fortran 90 Support.
* Fortran preprocessor:                  Overall Options.
* FPE handling:                          Floating-point Exception Handling.
* FPut intrinsic <1>:                    FPut Intrinsic (function).
* FPut intrinsic:                        FPut Intrinsic (subroutine).
* FPutC intrinsic <1>:                   FPutC Intrinsic (function).
* FPutC intrinsic:                       FPutC Intrinsic (subroutine).
* Fraction intrinsic:                    Fraction Intrinsic.
* free form <1>:                         Fortran Dialect Options.
* free form <2>:                         Lines.
* free form:                             Source Form.
* front end, g77:                        What is GNU Fortran?.
* FSeek intrinsic:                       FSeek Intrinsic.
* FSF, funding the:                      Funding GNU Fortran.
* FStat intrinsic <1>:                   FStat Intrinsic (subroutine).
* FStat intrinsic:                       FStat Intrinsic (function).
* FTell intrinsic <1>:                   FTell Intrinsic (function).
* FTell intrinsic:                       FTell Intrinsic (subroutine).
* function references, in adjustable array bounds: Array Bounds Expressions.
* FUNCTION statement <1>:                Functions.
* FUNCTION statement:                    Procedures.
* functions:                             Functions.
* functions, mistyped:                   Not My Type.
* funding improvements:                  Funding GNU Fortran.
* funding the FSF:                       Funding GNU Fortran.
* g77 command <1>:                       G77 and GCC.
* g77 command:                           What is GNU Fortran?.
* g77 front end:                         What is GNU Fortran?.
* g77 options, --driver <1>:             Invoking G77.
* g77 options, --driver:                 G77 and GCC.
* g77 options, -v:                       G77 and GCC.
* g77 version number:                    Merging Distributions.
* g77, components of:                    What is GNU Fortran?.
* g77, installation of:                  Installation of Binaries.
* GBE <1>:                               Patching GNU CC Necessary.
* GBE:                                   What is GNU Fortran?.
* gcc back end:                          What is GNU Fortran?.
* gcc command <1>:                       What is GNU Fortran?.
* gcc command:                           G77 and GCC.
* gcc command as driver:                 What is GNU Fortran?.
* gcc not recognizing Fortran source:    What is GNU Fortran?.
* gcc version numbering:                 Merging Distributions.
* gcc versions supported by g77:         Merging Distributions.
* gcc will not compile Fortran programs: Where to Install.
* gcc, building:                         Building GNU CC Necessary.
* gcc, installation of:                  Installation of Binaries.
* gdb command:                           What is GNU Fortran?.
* gdb support:                           Debugger Problems.
* generic intrinsics:                    Generics and Specifics.
* GError intrinsic:                      GError Intrinsic.
* GetArg intrinsic:                      GetArg Intrinsic.
* GETARG() intrinsic:                    Main Program Unit.
* GetCWD intrinsic <1>:                  GetCWD Intrinsic (function).
* GetCWD intrinsic:                      GetCWD Intrinsic (subroutine).
* GetEnv intrinsic:                      GetEnv Intrinsic.
* GetGId intrinsic:                      GetGId Intrinsic.
* GetLog intrinsic:                      GetLog Intrinsic.
* GetPId intrinsic:                      GetPId Intrinsic.
* getting started:                       Getting Started.
* GetUId intrinsic:                      GetUId Intrinsic.
* global names, warning <1>:             Warning Options.
* global names, warning:                 Code Gen Options.
* GMTime intrinsic:                      GMTime Intrinsic.
* GNU Back End (GBE):                    What is GNU Fortran?.
* GNU C required:                        GNU C Required.
* GNU Fortran command options:           Invoking G77.
* GNU Fortran Front End (FFE):           What is GNU Fortran?.
* gnu intrinsics group:                  Intrinsic Groups.
* GNU version numbering:                 Merging Distributions.
* GOTO statement:                        Assigned Statement Labels.
* gperf:                                 Missing gperf?.
* groups of intrinsics:                  Intrinsic Groups.
* hardware errors:                       Signal 11 and Friends.
* hidden intrinsics:                     Intrinsic Groups.
* Hollerith constants <1>:               Ugly Conversion of Initializers.
* Hollerith constants <2>:               Ugly Implicit Argument Conversion.
* Hollerith constants <3>:               Fortran Dialect Options.
* Hollerith constants:                   Character and Hollerith Constants.
* HostNm intrinsic <1>:                  HostNm Intrinsic (function).
* HostNm intrinsic:                      HostNm Intrinsic (subroutine).
* Huge intrinsic:                        Huge Intrinsic.
* I/O, errors:                           Run-time Library Errors.
* I/O, flushing <1>:                     Always Flush Output.
* I/O, flushing:                         Output Assumed To Flush.
* IAbs intrinsic:                        IAbs Intrinsic.
* IAChar intrinsic:                      IAChar Intrinsic.
* IAnd intrinsic:                        IAnd Intrinsic.
* IArgC intrinsic:                       IArgC Intrinsic.
* IARGC() intrinsic:                     Main Program Unit.
* IBClr intrinsic:                       IBClr Intrinsic.
* IBits intrinsic:                       IBits Intrinsic.
* IBSet intrinsic:                       IBSet Intrinsic.
* IChar intrinsic:                       IChar Intrinsic.
* IDate intrinsic <1>:                   IDate Intrinsic (UNIX).
* IDate intrinsic:                       IDate Intrinsic (VXT).
* IDiM intrinsic:                        IDiM Intrinsic.
* IDInt intrinsic:                       IDInt Intrinsic.
* IDNInt intrinsic:                      IDNInt Intrinsic.
* IEEE conformance:                      Optimize Options.
* IEOr intrinsic:                        IEOr Intrinsic.
* IErrNo intrinsic:                      IErrNo Intrinsic.
* IFix intrinsic:                        IFix Intrinsic.
* IIAbs intrinsic:                       IIAbs Intrinsic.
* IIAnd intrinsic:                       IIAnd Intrinsic.
* IIBClr intrinsic:                      IIBClr Intrinsic.
* IIBits intrinsic:                      IIBits Intrinsic.
* IIBSet intrinsic:                      IIBSet Intrinsic.
* IIDiM intrinsic:                       IIDiM Intrinsic.
* IIDInt intrinsic:                      IIDInt Intrinsic.
* IIDNnt intrinsic:                      IIDNnt Intrinsic.
* IIEOr intrinsic:                       IIEOr Intrinsic.
* IIFix intrinsic:                       IIFix Intrinsic.
* IInt intrinsic:                        IInt Intrinsic.
* IIOr intrinsic:                        IIOr Intrinsic.
* IIQint intrinsic:                      IIQint Intrinsic.
* IIQNnt intrinsic:                      IIQNnt Intrinsic.
* IIShftC intrinsic:                     IIShftC Intrinsic.
* IISign intrinsic:                      IISign Intrinsic.
* illegal unit number <1>:               Larger File Unit Numbers.
* illegal unit number:                   Large File Unit Numbers.
* Imag intrinsic:                        Imag Intrinsic.
* imaginary part:                        Ugly Complex Part Extraction.
* imaginary part of complex:             Complex Variables.
* ImagPart intrinsic:                    ImagPart Intrinsic.
* IMax0 intrinsic:                       IMax0 Intrinsic.
* IMax1 intrinsic:                       IMax1 Intrinsic.
* IMin0 intrinsic:                       IMin0 Intrinsic.
* IMin1 intrinsic:                       IMin1 Intrinsic.
* IMod intrinsic:                        IMod Intrinsic.
* IMPLICIT CHARACTER*(*) statement:      Limitation on Implicit Declarations.
* implicit declaration, warning:         Warning Options.
* IMPLICIT NONE, similar effect:         Warning Options.
* implicit typing:                       Not My Type.
* improvements, funding:                 Funding GNU Fortran.
* in-line code:                          What is GNU Fortran?.
* in-line compilation:                   Optimize Options.
* INCLUDE:                               INCLUDE.
* INCLUDE directive <1>:                 Preprocessor Options.
* INCLUDE directive <2>:                 Bug Reporting.
* INCLUDE directive:                     Directory Options.
* included files:                        Bug Reporting.
* inclusion, directory search paths for: Directory Options.
* inconsistent floating-point results:   Floating-point Errors.
* incorrect diagnostics:                 What is GNU Fortran?.
* incorrect error messages:              What is GNU Fortran?.
* incorrect use of language:             What is GNU Fortran?.
* increasing maximum unit number <1>:    Large File Unit Numbers.
* increasing maximum unit number:        Larger File Unit Numbers.
* increasing precision:                  Increasing Precision/Range.
* increasing range:                      Increasing Precision/Range.
* Index intrinsic:                       Index Intrinsic.
* info, updating directory:              Updating Documentation.
* INInt intrinsic:                       INInt Intrinsic.
* initialization:                        Actual Bugs.
* initialization of local variables:     Code Gen Options.
* initialization, runtime:               Startup Code.
* initialization, statement placement:   Initializing Before Specifying.
* INot intrinsic:                        INot Intrinsic.
* INQUIRE statement:                     OPEN CLOSE and INQUIRE Keywords.
* installation of binaries:              Installation of Binaries.
* installation problems:                 Problems Installing.
* installation trouble:                  Trouble.
* installing GNU Fortran:                Installation.
* installing, checking before:           Pre-installation Checks.
* Int intrinsic:                         Int Intrinsic.
* Int2 intrinsic:                        Int2 Intrinsic.
* Int8 intrinsic:                        Int8 Intrinsic.
* integer constants:                     Actual Bugs.
* INTEGER(KIND=1) type:                  Compiler Types.
* INTEGER(KIND=2) type:                  Compiler Types.
* INTEGER(KIND=3) type:                  Compiler Types.
* INTEGER(KIND=6) type:                  Compiler Types.
* INTEGER*2 support:                     Popular Non-standard Types.
* interfacing:                           Debugging and Interfacing.
* intrinsics, Abort:                     Abort Intrinsic.
* intrinsics, Abs:                       Abs Intrinsic.
* intrinsics, Access:                    Access Intrinsic.
* intrinsics, AChar:                     AChar Intrinsic.
* intrinsics, ACos:                      ACos Intrinsic.
* intrinsics, ACosD:                     ACosD Intrinsic.
* intrinsics, AdjustL:                   AdjustL Intrinsic.
* intrinsics, AdjustR:                   AdjustR Intrinsic.
* intrinsics, AIMAG:                     REAL() and AIMAG() of Complex.
* intrinsics, AImag:                     AImag Intrinsic.
* intrinsics, AIMax0:                    AIMax0 Intrinsic.
* intrinsics, AIMin0:                    AIMin0 Intrinsic.
* intrinsics, AInt:                      AInt Intrinsic.
* intrinsics, AJMax0:                    AJMax0 Intrinsic.
* intrinsics, AJMin0:                    AJMin0 Intrinsic.
* intrinsics, Alarm:                     Alarm Intrinsic.
* intrinsics, All:                       All Intrinsic.
* intrinsics, Allocated:                 Allocated Intrinsic.
* intrinsics, ALog:                      ALog Intrinsic.
* intrinsics, ALog10:                    ALog10 Intrinsic.
* intrinsics, AMax0:                     AMax0 Intrinsic.
* intrinsics, AMax1:                     AMax1 Intrinsic.
* intrinsics, AMin0:                     AMin0 Intrinsic.
* intrinsics, AMin1:                     AMin1 Intrinsic.
* intrinsics, AMod:                      AMod Intrinsic.
* intrinsics, AND:                       Bit Operations on Floating-point Data.
* intrinsics, And:                       And Intrinsic.
* intrinsics, ANInt:                     ANInt Intrinsic.
* intrinsics, Any:                       Any Intrinsic.
* intrinsics, ASin:                      ASin Intrinsic.
* intrinsics, ASinD:                     ASinD Intrinsic.
* intrinsics, Associated:                Associated Intrinsic.
* intrinsics, ATan:                      ATan Intrinsic.
* intrinsics, ATan2:                     ATan2 Intrinsic.
* intrinsics, ATan2D:                    ATan2D Intrinsic.
* intrinsics, ATanD:                     ATanD Intrinsic.
* intrinsics, badu77:                    Fortran Dialect Options.
* intrinsics, BesJ0:                     BesJ0 Intrinsic.
* intrinsics, BesJ1:                     BesJ1 Intrinsic.
* intrinsics, BesJN:                     BesJN Intrinsic.
* intrinsics, BesY0:                     BesY0 Intrinsic.
* intrinsics, BesY1:                     BesY1 Intrinsic.
* intrinsics, BesYN:                     BesYN Intrinsic.
* intrinsics, Bit_Size:                  Bit_Size Intrinsic.
* intrinsics, BITest:                    BITest Intrinsic.
* intrinsics, BJTest:                    BJTest Intrinsic.
* intrinsics, BTest:                     BTest Intrinsic.
* intrinsics, CAbs:                      CAbs Intrinsic.
* intrinsics, CCos:                      CCos Intrinsic.
* intrinsics, CDAbs:                     CDAbs Intrinsic.
* intrinsics, CDCos:                     CDCos Intrinsic.
* intrinsics, CDExp:                     CDExp Intrinsic.
* intrinsics, CDLog:                     CDLog Intrinsic.
* intrinsics, CDSin:                     CDSin Intrinsic.
* intrinsics, CDSqRt:                    CDSqRt Intrinsic.
* intrinsics, Ceiling:                   Ceiling Intrinsic.
* intrinsics, CExp:                      CExp Intrinsic.
* intrinsics, Char:                      Char Intrinsic.
* intrinsics, ChDir <1>:                 ChDir Intrinsic (function).
* intrinsics, ChDir:                     ChDir Intrinsic (subroutine).
* intrinsics, ChMod <1>:                 ChMod Intrinsic (subroutine).
* intrinsics, ChMod:                     ChMod Intrinsic (function).
* intrinsics, CLog:                      CLog Intrinsic.
* intrinsics, CMPLX:                     CMPLX() of DOUBLE PRECISION.
* intrinsics, Cmplx:                     Cmplx Intrinsic.
* intrinsics, COMPLEX:                   Fortran Dialect Options.
* intrinsics, Complex:                   Complex Intrinsic.
* intrinsics, Conjg:                     Conjg Intrinsic.
* intrinsics, context-sensitive:         Context-Sensitive Intrinsicness.
* intrinsics, Cos:                       Cos Intrinsic.
* intrinsics, CosD:                      CosD Intrinsic.
* intrinsics, CosH:                      CosH Intrinsic.
* intrinsics, Count:                     Count Intrinsic.
* intrinsics, CPU_Time:                  CPU_Time Intrinsic.
* intrinsics, CShift:                    CShift Intrinsic.
* intrinsics, CSin:                      CSin Intrinsic.
* intrinsics, CSqRt:                     CSqRt Intrinsic.
* intrinsics, CTime <1>:                 CTime Intrinsic (subroutine).
* intrinsics, CTime:                     CTime Intrinsic (function).
* intrinsics, DAbs:                      DAbs Intrinsic.
* intrinsics, DACos:                     DACos Intrinsic.
* intrinsics, DACosD:                    DACosD Intrinsic.
* intrinsics, DASin:                     DASin Intrinsic.
* intrinsics, DASinD:                    DASinD Intrinsic.
* intrinsics, DATan:                     DATan Intrinsic.
* intrinsics, DATan2:                    DATan2 Intrinsic.
* intrinsics, DATan2D:                   DATan2D Intrinsic.
* intrinsics, DATanD:                    DATanD Intrinsic.
* intrinsics, Date:                      Date Intrinsic.
* intrinsics, Date_and_Time:             Date_and_Time Intrinsic.
* intrinsics, DbesJ0:                    DbesJ0 Intrinsic.
* intrinsics, DbesJ1:                    DbesJ1 Intrinsic.
* intrinsics, DbesJN:                    DbesJN Intrinsic.
* intrinsics, DbesY0:                    DbesY0 Intrinsic.
* intrinsics, DbesY1:                    DbesY1 Intrinsic.
* intrinsics, DbesYN:                    DbesYN Intrinsic.
* intrinsics, Dble:                      Dble Intrinsic.
* intrinsics, DbleQ:                     DbleQ Intrinsic.
* intrinsics, DCmplx:                    DCmplx Intrinsic.
* intrinsics, DConjg:                    DConjg Intrinsic.
* intrinsics, DCos:                      DCos Intrinsic.
* intrinsics, DCosD:                     DCosD Intrinsic.
* intrinsics, DCosH:                     DCosH Intrinsic.
* intrinsics, DDiM:                      DDiM Intrinsic.
* intrinsics, deleted:                   Intrinsic Groups.
* intrinsics, DErF:                      DErF Intrinsic.
* intrinsics, DErFC:                     DErFC Intrinsic.
* intrinsics, DExp:                      DExp Intrinsic.
* intrinsics, DFloat:                    DFloat Intrinsic.
* intrinsics, DFlotI:                    DFlotI Intrinsic.
* intrinsics, DFlotJ:                    DFlotJ Intrinsic.
* intrinsics, Digits:                    Digits Intrinsic.
* intrinsics, DiM:                       DiM Intrinsic.
* intrinsics, DImag:                     DImag Intrinsic.
* intrinsics, DInt:                      DInt Intrinsic.
* intrinsics, disabled:                  Intrinsic Groups.
* intrinsics, DLog:                      DLog Intrinsic.
* intrinsics, DLog10:                    DLog10 Intrinsic.
* intrinsics, DMax1:                     DMax1 Intrinsic.
* intrinsics, DMin1:                     DMin1 Intrinsic.
* intrinsics, DMod:                      DMod Intrinsic.
* intrinsics, DNInt:                     DNInt Intrinsic.
* intrinsics, Dot_Product:               Dot_Product Intrinsic.
* intrinsics, DProd:                     DProd Intrinsic.
* intrinsics, DReal:                     DReal Intrinsic.
* intrinsics, DSign:                     DSign Intrinsic.
* intrinsics, DSin:                      DSin Intrinsic.
* intrinsics, DSinD:                     DSinD Intrinsic.
* intrinsics, DSinH:                     DSinH Intrinsic.
* intrinsics, DSqRt:                     DSqRt Intrinsic.
* intrinsics, DTan:                      DTan Intrinsic.
* intrinsics, DTanD:                     DTanD Intrinsic.
* intrinsics, DTanH:                     DTanH Intrinsic.
* intrinsics, Dtime <1>:                 Dtime Intrinsic (function).
* intrinsics, Dtime:                     Dtime Intrinsic (subroutine).
* intrinsics, enabled:                   Intrinsic Groups.
* intrinsics, EOShift:                   EOShift Intrinsic.
* intrinsics, Epsilon:                   Epsilon Intrinsic.
* intrinsics, ErF:                       ErF Intrinsic.
* intrinsics, ErFC:                      ErFC Intrinsic.
* intrinsics, ETime <1>:                 ETime Intrinsic (subroutine).
* intrinsics, ETime:                     ETime Intrinsic (function).
* intrinsics, Exit:                      Exit Intrinsic.
* intrinsics, Exp:                       Exp Intrinsic.
* intrinsics, Exponent:                  Exponent Intrinsic.
* intrinsics, f2c:                       Fortran Dialect Options.
* intrinsics, Fdate <1>:                 Fdate Intrinsic (function).
* intrinsics, Fdate:                     Fdate Intrinsic (subroutine).
* intrinsics, FGet <1>:                  FGet Intrinsic (subroutine).
* intrinsics, FGet:                      FGet Intrinsic (function).
* intrinsics, FGetC <1>:                 FGetC Intrinsic (subroutine).
* intrinsics, FGetC:                     FGetC Intrinsic (function).
* intrinsics, Float:                     Float Intrinsic.
* intrinsics, FloatI:                    FloatI Intrinsic.
* intrinsics, FloatJ:                    FloatJ Intrinsic.
* intrinsics, Floor:                     Floor Intrinsic.
* intrinsics, Flush:                     Flush Intrinsic.
* intrinsics, FNum:                      FNum Intrinsic.
* intrinsics, Fortran 90:                Fortran Dialect Options.
* intrinsics, FPut <1>:                  FPut Intrinsic (function).
* intrinsics, FPut:                      FPut Intrinsic (subroutine).
* intrinsics, FPutC <1>:                 FPutC Intrinsic (subroutine).
* intrinsics, FPutC:                     FPutC Intrinsic (function).
* intrinsics, Fraction:                  Fraction Intrinsic.
* intrinsics, FSeek:                     FSeek Intrinsic.
* intrinsics, FStat <1>:                 FStat Intrinsic (subroutine).
* intrinsics, FStat:                     FStat Intrinsic (function).
* intrinsics, FTell <1>:                 FTell Intrinsic (subroutine).
* intrinsics, FTell:                     FTell Intrinsic (function).
* intrinsics, generic:                   Generics and Specifics.
* intrinsics, GError:                    GError Intrinsic.
* intrinsics, GetArg:                    GetArg Intrinsic.
* intrinsics, GETARG():                  Main Program Unit.
* intrinsics, GetCWD <1>:                GetCWD Intrinsic (function).
* intrinsics, GetCWD:                    GetCWD Intrinsic (subroutine).
* intrinsics, GetEnv:                    GetEnv Intrinsic.
* intrinsics, GetGId:                    GetGId Intrinsic.
* intrinsics, GetLog:                    GetLog Intrinsic.
* intrinsics, GetPId:                    GetPId Intrinsic.
* intrinsics, GetUId:                    GetUId Intrinsic.
* intrinsics, GMTime:                    GMTime Intrinsic.
* intrinsics, groups:                    Intrinsic Groups.
* intrinsics, groups of:                 Intrinsic Groups.
* intrinsics, hidden:                    Intrinsic Groups.
* intrinsics, HostNm <1>:                HostNm Intrinsic (subroutine).
* intrinsics, HostNm:                    HostNm Intrinsic (function).
* intrinsics, Huge:                      Huge Intrinsic.
* intrinsics, IAbs:                      IAbs Intrinsic.
* intrinsics, IAChar:                    IAChar Intrinsic.
* intrinsics, IAnd:                      IAnd Intrinsic.
* intrinsics, IArgC:                     IArgC Intrinsic.
* intrinsics, IARGC():                   Main Program Unit.
* intrinsics, IBClr:                     IBClr Intrinsic.
* intrinsics, IBits:                     IBits Intrinsic.
* intrinsics, IBSet:                     IBSet Intrinsic.
* intrinsics, IChar:                     IChar Intrinsic.
* intrinsics, IDate <1>:                 IDate Intrinsic (VXT).
* intrinsics, IDate:                     IDate Intrinsic (UNIX).
* intrinsics, IDiM:                      IDiM Intrinsic.
* intrinsics, IDInt:                     IDInt Intrinsic.
* intrinsics, IDNInt:                    IDNInt Intrinsic.
* intrinsics, IEOr:                      IEOr Intrinsic.
* intrinsics, IErrNo:                    IErrNo Intrinsic.
* intrinsics, IFix:                      IFix Intrinsic.
* intrinsics, IIAbs:                     IIAbs Intrinsic.
* intrinsics, IIAnd:                     IIAnd Intrinsic.
* intrinsics, IIBClr:                    IIBClr Intrinsic.
* intrinsics, IIBits:                    IIBits Intrinsic.
* intrinsics, IIBSet:                    IIBSet Intrinsic.
* intrinsics, IIDiM:                     IIDiM Intrinsic.
* intrinsics, IIDInt:                    IIDInt Intrinsic.
* intrinsics, IIDNnt:                    IIDNnt Intrinsic.
* intrinsics, IIEOr:                     IIEOr Intrinsic.
* intrinsics, IIFix:                     IIFix Intrinsic.
* intrinsics, IInt:                      IInt Intrinsic.
* intrinsics, IIOr:                      IIOr Intrinsic.
* intrinsics, IIQint:                    IIQint Intrinsic.
* intrinsics, IIQNnt:                    IIQNnt Intrinsic.
* intrinsics, IIShftC:                   IIShftC Intrinsic.
* intrinsics, IISign:                    IISign Intrinsic.
* intrinsics, Imag:                      Imag Intrinsic.
* intrinsics, ImagPart:                  ImagPart Intrinsic.
* intrinsics, IMax0:                     IMax0 Intrinsic.
* intrinsics, IMax1:                     IMax1 Intrinsic.
* intrinsics, IMin0:                     IMin0 Intrinsic.
* intrinsics, IMin1:                     IMin1 Intrinsic.
* intrinsics, IMod:                      IMod Intrinsic.
* intrinsics, Index:                     Index Intrinsic.
* intrinsics, INInt:                     INInt Intrinsic.
* intrinsics, INot:                      INot Intrinsic.
* intrinsics, Int:                       Int Intrinsic.
* intrinsics, Int2:                      Int2 Intrinsic.
* intrinsics, Int8:                      Int8 Intrinsic.
* intrinsics, IOr:                       IOr Intrinsic.
* intrinsics, IRand:                     IRand Intrinsic.
* intrinsics, IsaTty:                    IsaTty Intrinsic.
* intrinsics, IShft:                     IShft Intrinsic.
* intrinsics, IShftC:                    IShftC Intrinsic.
* intrinsics, ISign:                     ISign Intrinsic.
* intrinsics, ITime:                     ITime Intrinsic.
* intrinsics, IZExt:                     IZExt Intrinsic.
* intrinsics, JIAbs:                     JIAbs Intrinsic.
* intrinsics, JIAnd:                     JIAnd Intrinsic.
* intrinsics, JIBClr:                    JIBClr Intrinsic.
* intrinsics, JIBits:                    JIBits Intrinsic.
* intrinsics, JIBSet:                    JIBSet Intrinsic.
* intrinsics, JIDiM:                     JIDiM Intrinsic.
* intrinsics, JIDInt:                    JIDInt Intrinsic.
* intrinsics, JIDNnt:                    JIDNnt Intrinsic.
* intrinsics, JIEOr:                     JIEOr Intrinsic.
* intrinsics, JIFix:                     JIFix Intrinsic.
* intrinsics, JInt:                      JInt Intrinsic.
* intrinsics, JIOr:                      JIOr Intrinsic.
* intrinsics, JIQint:                    JIQint Intrinsic.
* intrinsics, JIQNnt:                    JIQNnt Intrinsic.
* intrinsics, JIShft:                    JIShft Intrinsic.
* intrinsics, JIShftC:                   JIShftC Intrinsic.
* intrinsics, JISign:                    JISign Intrinsic.
* intrinsics, JMax0:                     JMax0 Intrinsic.
* intrinsics, JMax1:                     JMax1 Intrinsic.
* intrinsics, JMin0:                     JMin0 Intrinsic.
* intrinsics, JMin1:                     JMin1 Intrinsic.
* intrinsics, JMod:                      JMod Intrinsic.
* intrinsics, JNInt:                     JNInt Intrinsic.
* intrinsics, JNot:                      JNot Intrinsic.
* intrinsics, JZExt:                     JZExt Intrinsic.
* intrinsics, Kill <1>:                  Kill Intrinsic (function).
* intrinsics, Kill:                      Kill Intrinsic (subroutine).
* intrinsics, Kind:                      Kind Intrinsic.
* intrinsics, LBound:                    LBound Intrinsic.
* intrinsics, Len:                       Len Intrinsic.
* intrinsics, Len_Trim:                  Len_Trim Intrinsic.
* intrinsics, LGe:                       LGe Intrinsic.
* intrinsics, LGt:                       LGt Intrinsic.
* intrinsics, Link <1>:                  Link Intrinsic (subroutine).
* intrinsics, Link:                      Link Intrinsic (function).
* intrinsics, LLe:                       LLe Intrinsic.
* intrinsics, LLt:                       LLt Intrinsic.
* intrinsics, LnBlnk:                    LnBlnk Intrinsic.
* intrinsics, Loc:                       Loc Intrinsic.
* intrinsics, Log:                       Log Intrinsic.
* intrinsics, Log10:                     Log10 Intrinsic.
* intrinsics, Logical:                   Logical Intrinsic.
* intrinsics, Long:                      Long Intrinsic.
* intrinsics, LShift:                    LShift Intrinsic.
* intrinsics, LStat <1>:                 LStat Intrinsic (subroutine).
* intrinsics, LStat:                     LStat Intrinsic (function).
* intrinsics, LTime:                     LTime Intrinsic.
* intrinsics, MatMul:                    MatMul Intrinsic.
* intrinsics, Max:                       Max Intrinsic.
* intrinsics, Max0:                      Max0 Intrinsic.
* intrinsics, Max1:                      Max1 Intrinsic.
* intrinsics, MaxExponent:               MaxExponent Intrinsic.
* intrinsics, MaxLoc:                    MaxLoc Intrinsic.
* intrinsics, MaxVal:                    MaxVal Intrinsic.
* intrinsics, MClock:                    MClock Intrinsic.
* intrinsics, MClock8:                   MClock8 Intrinsic.
* intrinsics, Merge:                     Merge Intrinsic.
* intrinsics, MIL-STD 1753:              Fortran Dialect Options.
* intrinsics, Min:                       Min Intrinsic.
* intrinsics, Min0:                      Min0 Intrinsic.
* intrinsics, Min1:                      Min1 Intrinsic.
* intrinsics, MinExponent:               MinExponent Intrinsic.
* intrinsics, MinLoc:                    MinLoc Intrinsic.
* intrinsics, MinVal:                    MinVal Intrinsic.
* intrinsics, Mod:                       Mod Intrinsic.
* intrinsics, Modulo:                    Modulo Intrinsic.
* intrinsics, MvBits:                    MvBits Intrinsic.
* intrinsics, Nearest:                   Nearest Intrinsic.
* intrinsics, NInt:                      NInt Intrinsic.
* intrinsics, Not:                       Not Intrinsic.
* intrinsics, Or:                        Or Intrinsic.
* intrinsics, OR:                        Bit Operations on Floating-point Data.
* intrinsics, others:                    Other Intrinsics.
* intrinsics, Pack:                      Pack Intrinsic.
* intrinsics, PError:                    PError Intrinsic.
* intrinsics, Precision:                 Precision Intrinsic.
* intrinsics, Present:                   Present Intrinsic.
* intrinsics, Product:                   Product Intrinsic.
* intrinsics, QAbs:                      QAbs Intrinsic.
* intrinsics, QACos:                     QACos Intrinsic.
* intrinsics, QACosD:                    QACosD Intrinsic.
* intrinsics, QASin:                     QASin Intrinsic.
* intrinsics, QASinD:                    QASinD Intrinsic.
* intrinsics, QATan:                     QATan Intrinsic.
* intrinsics, QATan2:                    QATan2 Intrinsic.
* intrinsics, QATan2D:                   QATan2D Intrinsic.
* intrinsics, QATanD:                    QATanD Intrinsic.
* intrinsics, QCos:                      QCos Intrinsic.
* intrinsics, QCosD:                     QCosD Intrinsic.
* intrinsics, QCosH:                     QCosH Intrinsic.
* intrinsics, QDiM:                      QDiM Intrinsic.
* intrinsics, QExp:                      QExp Intrinsic.
* intrinsics, QExt:                      QExt Intrinsic.
* intrinsics, QExtD:                     QExtD Intrinsic.
* intrinsics, QFloat:                    QFloat Intrinsic.
* intrinsics, QInt:                      QInt Intrinsic.
* intrinsics, QLog:                      QLog Intrinsic.
* intrinsics, QLog10:                    QLog10 Intrinsic.
* intrinsics, QMax1:                     QMax1 Intrinsic.
* intrinsics, QMin1:                     QMin1 Intrinsic.
* intrinsics, QMod:                      QMod Intrinsic.
* intrinsics, QNInt:                     QNInt Intrinsic.
* intrinsics, QSin:                      QSin Intrinsic.
* intrinsics, QSinD:                     QSinD Intrinsic.
* intrinsics, QSinH:                     QSinH Intrinsic.
* intrinsics, QSqRt:                     QSqRt Intrinsic.
* intrinsics, QTan:                      QTan Intrinsic.
* intrinsics, QTanD:                     QTanD Intrinsic.
* intrinsics, QTanH:                     QTanH Intrinsic.
* intrinsics, Radix:                     Radix Intrinsic.
* intrinsics, Rand:                      Rand Intrinsic.
* intrinsics, Random_Number:             Random_Number Intrinsic.
* intrinsics, Random_Seed:               Random_Seed Intrinsic.
* intrinsics, Range:                     Range Intrinsic.
* intrinsics, Real:                      Real Intrinsic.
* intrinsics, REAL:                      REAL() and AIMAG() of Complex.
* intrinsics, RealPart:                  RealPart Intrinsic.
* intrinsics, Rename <1>:                Rename Intrinsic (function).
* intrinsics, Rename:                    Rename Intrinsic (subroutine).
* intrinsics, Repeat:                    Repeat Intrinsic.
* intrinsics, Reshape:                   Reshape Intrinsic.
* intrinsics, RRSpacing:                 RRSpacing Intrinsic.
* intrinsics, RShift:                    RShift Intrinsic.
* intrinsics, Scale:                     Scale Intrinsic.
* intrinsics, Scan:                      Scan Intrinsic.
* intrinsics, Secnds:                    Secnds Intrinsic.
* intrinsics, Second <1>:                Second Intrinsic (subroutine).
* intrinsics, Second:                    Second Intrinsic (function).
* intrinsics, Selected_Int_Kind:         Selected_Int_Kind Intrinsic.
* intrinsics, Selected_Real_Kind:        Selected_Real_Kind Intrinsic.
* intrinsics, Set_Exponent:              Set_Exponent Intrinsic.
* intrinsics, Shape:                     Shape Intrinsic.
* intrinsics, SHIFT:                     Bit Operations on Floating-point Data.
* intrinsics, Short:                     Short Intrinsic.
* intrinsics, Sign:                      Sign Intrinsic.
* intrinsics, Signal <1>:                Signal Intrinsic (subroutine).
* intrinsics, Signal:                    Signal Intrinsic (function).
* intrinsics, Sin:                       Sin Intrinsic.
* intrinsics, SinD:                      SinD Intrinsic.
* intrinsics, SinH:                      SinH Intrinsic.
* intrinsics, Sleep:                     Sleep Intrinsic.
* intrinsics, Sngl:                      Sngl Intrinsic.
* intrinsics, SnglQ:                     SnglQ Intrinsic.
* intrinsics, Spacing:                   Spacing Intrinsic.
* intrinsics, Spread:                    Spread Intrinsic.
* intrinsics, SqRt:                      SqRt Intrinsic.
* intrinsics, SRand:                     SRand Intrinsic.
* intrinsics, Stat <1>:                  Stat Intrinsic (subroutine).
* intrinsics, Stat:                      Stat Intrinsic (function).
* intrinsics, Sum:                       Sum Intrinsic.
* intrinsics, SymLnk <1>:                SymLnk Intrinsic (function).
* intrinsics, SymLnk:                    SymLnk Intrinsic (subroutine).
* intrinsics, System <1>:                System Intrinsic (subroutine).
* intrinsics, System:                    System Intrinsic (function).
* intrinsics, System_Clock:              System_Clock Intrinsic.
* intrinsics, table of:                  Table of Intrinsic Functions.
* intrinsics, Tan:                       Tan Intrinsic.
* intrinsics, TanD:                      TanD Intrinsic.
* intrinsics, TanH:                      TanH Intrinsic.
* intrinsics, Time <1>:                  Time Intrinsic (UNIX).
* intrinsics, Time:                      Time Intrinsic (VXT).
* intrinsics, Time8:                     Time8 Intrinsic.
* intrinsics, Tiny:                      Tiny Intrinsic.
* intrinsics, Transfer:                  Transfer Intrinsic.
* intrinsics, Transpose:                 Transpose Intrinsic.
* intrinsics, Trim:                      Trim Intrinsic.
* intrinsics, TtyNam <1>:                TtyNam Intrinsic (subroutine).
* intrinsics, TtyNam:                    TtyNam Intrinsic (function).
* intrinsics, UBound:                    UBound Intrinsic.
* intrinsics, UMask <1>:                 UMask Intrinsic (subroutine).
* intrinsics, UMask:                     UMask Intrinsic (function).
* intrinsics, UNIX:                      Fortran Dialect Options.
* intrinsics, Unlink <1>:                Unlink Intrinsic (function).
* intrinsics, Unlink:                    Unlink Intrinsic (subroutine).
* intrinsics, Unpack:                    Unpack Intrinsic.
* intrinsics, Verify:                    Verify Intrinsic.
* intrinsics, VXT:                       Fortran Dialect Options.
* intrinsics, XOr:                       XOr Intrinsic.
* intrinsics, ZAbs:                      ZAbs Intrinsic.
* intrinsics, ZCos:                      ZCos Intrinsic.
* intrinsics, ZExp:                      ZExp Intrinsic.
* intrinsics, ZExt:                      ZExt Intrinsic.
* intrinsics, ZLog:                      ZLog Intrinsic.
* intrinsics, ZSin:                      ZSin Intrinsic.
* intrinsics, ZSqRt:                     ZSqRt Intrinsic.
* Introduction:                          Top.
* invalid assembly code:                 Bug Criteria.
* invalid input:                         Bug Criteria.
* IOr intrinsic:                         IOr Intrinsic.
* IOSTAT=:                               Run-time Library Errors.
* IRand intrinsic:                       IRand Intrinsic.
* Irix 6:                                System-specific Problems.
* IsaTty intrinsic:                      IsaTty Intrinsic.
* IShft intrinsic:                       IShft Intrinsic.
* IShftC intrinsic:                      IShftC Intrinsic.
* ISign intrinsic:                       ISign Intrinsic.
* ITime intrinsic:                       ITime Intrinsic.
* ix86:                                  News.
* IZExt intrinsic:                       IZExt Intrinsic.
* JCB002 program:                        Generics and Specifics.
* JCB003 program:                        CMPAMBIG.
* JIAbs intrinsic:                       JIAbs Intrinsic.
* JIAnd intrinsic:                       JIAnd Intrinsic.
* JIBClr intrinsic:                      JIBClr Intrinsic.
* JIBits intrinsic:                      JIBits Intrinsic.
* JIBSet intrinsic:                      JIBSet Intrinsic.
* JIDiM intrinsic:                       JIDiM Intrinsic.
* JIDInt intrinsic:                      JIDInt Intrinsic.
* JIDNnt intrinsic:                      JIDNnt Intrinsic.
* JIEOr intrinsic:                       JIEOr Intrinsic.
* JIFix intrinsic:                       JIFix Intrinsic.
* JInt intrinsic:                        JInt Intrinsic.
* JIOr intrinsic:                        JIOr Intrinsic.
* JIQint intrinsic:                      JIQint Intrinsic.
* JIQNnt intrinsic:                      JIQNnt Intrinsic.
* JIShft intrinsic:                      JIShft Intrinsic.
* JIShftC intrinsic:                     JIShftC Intrinsic.
* JISign intrinsic:                      JISign Intrinsic.
* JMax0 intrinsic:                       JMax0 Intrinsic.
* JMax1 intrinsic:                       JMax1 Intrinsic.
* JMin0 intrinsic:                       JMin0 Intrinsic.
* JMin1 intrinsic:                       JMin1 Intrinsic.
* JMod intrinsic:                        JMod Intrinsic.
* JNInt intrinsic:                       JNInt Intrinsic.
* JNot intrinsic:                        JNot Intrinsic.
* JZExt intrinsic:                       JZExt Intrinsic.
* keywords, RECURSIVE:                   RECURSIVE Keyword.
* Kill intrinsic <1>:                    Kill Intrinsic (subroutine).
* Kill intrinsic:                        Kill Intrinsic (function).
* Kind intrinsic:                        Kind Intrinsic.
* KIND= notation:                        Kind Notation.
* known causes of trouble:               Trouble.
* lack of recursion:                     RECURSIVE Keyword.
* language dialect options:              Fortran Dialect Options.
* language f77 not recognized:           Where to Install.
* language features:                     Direction of Language Development.
* language, incorrect use of:            What is GNU Fortran?.
* LANGUAGES:                             Building gcc.
* large aggregate areas:                 Actual Bugs.
* large common blocks:                   Large Common Blocks.
* large initialization:                  Large Initialization.
* layout of common blocks:               Aligned Data.
* LBound intrinsic:                      LBound Intrinsic.
* ld can't find _main:                   Cannot Link Fortran Programs.
* ld can't find _strtoul:                Missing strtoul.
* ld can't find strange names:           Cannot Link Fortran Programs.
* ld command:                            What is GNU Fortran?.
* ld error for f771:                     Missing strtoul.
* ld error for user code:                Cannot Link Fortran Programs.
* ld errors:                             Large Common Blocks.
* legacy code:                           Collected Fortran Wisdom.
* Len intrinsic:                         Len Intrinsic.
* Len_Trim intrinsic:                    Len_Trim Intrinsic.
* length of source lines:                Fortran Dialect Options.
* letters, lowercase:                    Case Sensitivity.
* letters, uppercase:                    Case Sensitivity.
* LGe intrinsic:                         LGe Intrinsic.
* LGt intrinsic:                         LGt Intrinsic.
* libc, non-ANSI or non-default:         Strange Behavior at Run Time.
* libf2c library:                        What is GNU Fortran?.
* libraries:                             What is GNU Fortran?.
* libraries, containing BLOCK DATA:      Block Data and Libraries.
* libraries, libf2c:                     What is GNU Fortran?.
* limits on continuation lines:          Continuation Line.
* limits, compiler:                      Compiler Limits.
* line length:                           Fortran Dialect Options.
* lines:                                 Lines.
* lines, continuation:                   Continuation Line.
* lines, long:                           Long Lines.
* lines, short:                          Short Lines.
* Link intrinsic <1>:                    Link Intrinsic (subroutine).
* Link intrinsic:                        Link Intrinsic (function).
* linker errors:                         Large Common Blocks.
* linking:                               What is GNU Fortran?.
* linking against non-standard library:  Strange Behavior at Run Time.
* linking error for f771:                Missing strtoul.
* linking error for user code:           Cannot Link Fortran Programs.
* linking with C:                        Interoperating with C and C++.
* LLe intrinsic:                         LLe Intrinsic.
* LLt intrinsic:                         LLt Intrinsic.
* LnBlnk intrinsic:                      LnBlnk Intrinsic.
* Loc intrinsic:                         Loc Intrinsic.
* local equivalence areas <1>:           Actual Bugs.
* local equivalence areas:               Local Equivalence Areas.
* Log intrinsic:                         Log Intrinsic.
* Log10 intrinsic:                       Log10 Intrinsic.
* logical expressions, comparing:        Equivalence Versus Equality.
* Logical intrinsic:                     Logical Intrinsic.
* LOGICAL(KIND=1) type:                  Compiler Types.
* LOGICAL(KIND=2) type:                  Compiler Types.
* LOGICAL(KIND=3) type:                  Compiler Types.
* LOGICAL(KIND=6) type:                  Compiler Types.
* LOGICAL*1 support:                     Popular Non-standard Types.
* Long intrinsic:                        Long Intrinsic.
* long source lines:                     Long Lines.
* loops, speeding up:                    Optimize Options.
* loops, unrolling:                      Optimize Options.
* lowercase letters:                     Case Sensitivity.
* LShift intrinsic:                      LShift Intrinsic.
* LStat intrinsic <1>:                   LStat Intrinsic (function).
* LStat intrinsic:                       LStat Intrinsic (subroutine).
* LTime intrinsic:                       LTime Intrinsic.
* machine code:                          What is GNU Fortran?.
* macro options:                         Shorthand Options.
* main program unit, debugging:          Main Program Unit.
* main():                                Main Program Unit.
* MAIN__():                              Main Program Unit.
* make clean:                            Cleanup Kills Stage Directories.
* make compare:                          Object File Differences.
* Makefile example:                      Bug Criteria.
* makeinfo:                              Missing makeinfo?.
* MAP statement:                         STRUCTURE UNION RECORD MAP.
* MatMul intrinsic:                      MatMul Intrinsic.
* Max intrinsic:                         Max Intrinsic.
* Max0 intrinsic:                        Max0 Intrinsic.
* Max1 intrinsic:                        Max1 Intrinsic.
* MaxExponent intrinsic:                 MaxExponent Intrinsic.
* maximum number of dimensions:          Compiler Limits.
* maximum rank:                          Compiler Limits.
* maximum stackable size:                Maximum Stackable Size.
* maximum unit number <1>:               Larger File Unit Numbers.
* maximum unit number:                   Large File Unit Numbers.
* MaxLoc intrinsic:                      MaxLoc Intrinsic.
* MaxVal intrinsic:                      MaxVal Intrinsic.
* MClock intrinsic:                      MClock Intrinsic.
* MClock8 intrinsic:                     MClock8 Intrinsic.
* memory usage, of compiler:             Actual Bugs.
* memory utilization:                    Large Initialization.
* Merge intrinsic:                       Merge Intrinsic.
* merging distributions:                 Merging Distributions.
* messages, run-time:                    Run-time Library Errors.
* messages, warning:                     Warning Options.
* messages, warning and error:           Warnings and Errors.
* mil intrinsics group:                  Intrinsic Groups.
* MIL-STD 1753 <1>:                      Fortran Dialect Options.
* MIL-STD 1753 <2>:                      END DO.
* MIL-STD 1753 <3>:                      DO WHILE.
* MIL-STD 1753:                          MIL-STD 1753.
* Min intrinsic:                         Min Intrinsic.
* Min0 intrinsic:                        Min0 Intrinsic.
* Min1 intrinsic:                        Min1 Intrinsic.
* MinExponent intrinsic:                 MinExponent Intrinsic.
* MinLoc intrinsic:                      MinLoc Intrinsic.
* MinVal intrinsic:                      MinVal Intrinsic.
* missing bison:                         Missing bison?.
* missing debug features:                Debugging Options.
* missing gperf:                         Missing gperf?.
* missing makeinfo:                      Missing makeinfo?.
* mistakes:                              What is GNU Fortran?.
* mistyped functions:                    Not My Type.
* mistyped variables:                    Not My Type.
* Mod intrinsic:                         Mod Intrinsic.
* modifying g77 <1>:                     Overall Options.
* modifying g77:                         Unpacking.
* Modulo intrinsic:                      Modulo Intrinsic.
* MvBits intrinsic:                      MvBits Intrinsic.
* MXUNIT <1>:                            Large File Unit Numbers.
* MXUNIT:                                Larger File Unit Numbers.
* name space:                            Mangling of Names.
* NAMELIST statement:                    NAMELIST.
* naming conflicts:                      Multiple Definitions of External Names.
* naming issues:                         Mangling of Names.
* naming programs test:                  Nothing Happens.
* NaN values:                            Floating-point Exception Handling.
* native compiler:                       Installing f77.
* Nearest intrinsic:                     Nearest Intrinsic.
* negative forms of options:             Invoking G77.
* Netlib <1>:                            C Interfacing Tools.
* Netlib:                                Increasing Precision/Range.
* network file system <1>:               Always Flush Output.
* network file system:                   Output Assumed To Flush.
* new users:                             Getting Started.
* newbies:                               Getting Started.
* NeXTStep problems:                     NeXTStep Problems.
* NFS <1>:                               Always Flush Output.
* NFS:                                   Output Assumed To Flush.
* NInt intrinsic:                        NInt Intrinsic.
* nonportable conversions:               Nonportable Conversions.
* Not intrinsic:                         Not Intrinsic.
* nothing happens:                       Nothing Happens.
* null arguments:                        Ugly Null Arguments.
* null byte, trailing:                   Character and Hollerith Constants.
* null CHARACTER strings:                Character Type.
* number of continuation lines:          Continuation Line.
* number of dimensions, maximum:         Compiler Limits.
* number of trips:                       Loops.
* object file, differences:              Object File Differences.
* octal constants:                       Double Quote Meaning.
* omitting arguments:                    Ugly Null Arguments.
* one-trip DO loops:                     Fortran Dialect Options.
* OPEN statement:                        OPEN CLOSE and INQUIRE Keywords.
* optimization, better:                  Better Optimization.
* optimizations, Pentium <1>:            Aligned Data.
* optimizations, Pentium <2>:            Unpacking.
* optimizations, Pentium:                Use Submodel Options.
* optimize options:                      Optimize Options.
* options to control warnings:           Warning Options.
* options, --driver <1>:                 Invoking G77.
* options, --driver:                     G77 and GCC.
* options, -falias-check <1>:            Code Gen Options.
* options, -falias-check:                Aliasing Assumed To Work.
* options, -fargument-alias <1>:         Code Gen Options.
* options, -fargument-alias:             Aliasing Assumed To Work.
* options, -fargument-noalias <1>:       Code Gen Options.
* options, -fargument-noalias:           Aliasing Assumed To Work.
* options, -fbadu77-intrinsics-delete:   Fortran Dialect Options.
* options, -fbadu77-intrinsics-disable:  Fortran Dialect Options.
* options, -fbadu77-intrinsics-enable:   Fortran Dialect Options.
* options, -fbadu77-intrinsics-hide:     Fortran Dialect Options.
* options, -fcaller-saves:               Optimize Options.
* options, -fcase-initcap:               Fortran Dialect Options.
* options, -fcase-lower:                 Fortran Dialect Options.
* options, -fcase-preserve:              Fortran Dialect Options.
* options, -fcase-strict-lower:          Fortran Dialect Options.
* options, -fcase-strict-upper:          Fortran Dialect Options.
* options, -fcase-upper:                 Fortran Dialect Options.
* options, -fdebug-kludge:               Code Gen Options.
* options, -fdelayed-branch:             Optimize Options.
* options, -fdollar-ok:                  Fortran Dialect Options.
* options, -fexpensive-optimizations:    Optimize Options.
* options, -ff2c-intrinsics-delete:      Fortran Dialect Options.
* options, -ff2c-intrinsics-disable:     Fortran Dialect Options.
* options, -ff2c-intrinsics-enable:      Fortran Dialect Options.
* options, -ff2c-intrinsics-hide:        Fortran Dialect Options.
* options, -ff2c-library:                Code Gen Options.
* options, -ff66:                        Shorthand Options.
* options, -ff77:                        Shorthand Options.
* options, -ff90:                        Fortran Dialect Options.
* options, -ff90-intrinsics-delete:      Fortran Dialect Options.
* options, -ff90-intrinsics-disable:     Fortran Dialect Options.
* options, -ff90-intrinsics-enable:      Fortran Dialect Options.
* options, -ff90-intrinsics-hide:        Fortran Dialect Options.
* options, -ffast-math:                  Optimize Options.
* options, -ffixed-line-length-N:        Fortran Dialect Options.
* options, -ffloat-store:                Optimize Options.
* options, -fforce-addr:                 Optimize Options.
* options, -fforce-mem:                  Optimize Options.
* options, -ffree-form:                  Fortran Dialect Options.
* options, -fgnu-intrinsics-delete:      Fortran Dialect Options.
* options, -fgnu-intrinsics-disable:     Fortran Dialect Options.
* options, -fgnu-intrinsics-enable:      Fortran Dialect Options.
* options, -fgnu-intrinsics-hide:        Fortran Dialect Options.
* options, -fGROUP-intrinsics-hide:      Overly Convenient Options.
* options, -finit-local-zero <1>:        Overly Convenient Options.
* options, -finit-local-zero:            Code Gen Options.
* options, -fintrin-case-any:            Fortran Dialect Options.
* options, -fintrin-case-initcap:        Fortran Dialect Options.
* options, -fintrin-case-lower:          Fortran Dialect Options.
* options, -fintrin-case-upper:          Fortran Dialect Options.
* options, -fmatch-case-any:             Fortran Dialect Options.
* options, -fmatch-case-initcap:         Fortran Dialect Options.
* options, -fmatch-case-lower:           Fortran Dialect Options.
* options, -fmatch-case-upper:           Fortran Dialect Options.
* options, -fmil-intrinsics-delete:      Fortran Dialect Options.
* options, -fmil-intrinsics-disable:     Fortran Dialect Options.
* options, -fmil-intrinsics-enable:      Fortran Dialect Options.
* options, -fmil-intrinsics-hide:        Fortran Dialect Options.
* options, -fno-argument-noalias-global <1>: Aliasing Assumed To Work.
* options, -fno-argument-noalias-global: Code Gen Options.
* options, -fno-automatic <1>:           Overly Convenient Options.
* options, -fno-automatic:               Code Gen Options.
* options, -fno-backslash:               Fortran Dialect Options.
* options, -fno-common:                  Code Gen Options.
* options, -fno-emulate-complex:         Code Gen Options.
* options, -fno-f2c <1>:                 Code Gen Options.
* options, -fno-f2c:                     Avoid f2c Compatibility.
* options, -fno-f77:                     Shorthand Options.
* options, -fno-fixed-form:              Fortran Dialect Options.
* options, -fno-globals:                 Code Gen Options.
* options, -fno-ident:                   Code Gen Options.
* options, -fno-inline:                  Optimize Options.
* options, -fno-move-all-movables:       Optimize Options.
* options, -fno-reduce-all-givs:         Optimize Options.
* options, -fno-rerun-loop-opt:          Optimize Options.
* options, -fno-second-underscore:       Code Gen Options.
* options, -fno-silent:                  Overall Options.
* options, -fno-ugly:                    Shorthand Options.
* options, -fno-ugly-args:               Fortran Dialect Options.
* options, -fno-ugly-init:               Fortran Dialect Options.
* options, -fno-underscoring <1>:        Code Gen Options.
* options, -fno-underscoring:            Names.
* options, -fonetrip:                    Fortran Dialect Options.
* options, -fpack-struct:                Code Gen Options.
* options, -fpcc-struct-return:          Code Gen Options.
* options, -fpedantic:                   Warning Options.
* options, -fPIC:                        Actual Bugs.
* options, -freg-struct-return:          Code Gen Options.
* options, -frerun-cse-after-loop:       Optimize Options.
* options, -fschedule-insns:             Optimize Options.
* options, -fschedule-insns2:            Optimize Options.
* options, -fset-g77-defaults:           Overall Options.
* options, -fshort-double:               Code Gen Options.
* options, -fsource-case-lower:          Fortran Dialect Options.
* options, -fsource-case-preserve:       Fortran Dialect Options.
* options, -fsource-case-upper:          Fortran Dialect Options.
* options, -fstrength-reduce:            Optimize Options.
* options, -fsymbol-case-any:            Fortran Dialect Options.
* options, -fsymbol-case-initcap:        Fortran Dialect Options.
* options, -fsymbol-case-lower:          Fortran Dialect Options.
* options, -fsymbol-case-upper:          Fortran Dialect Options.
* options, -fsyntax-only:                Warning Options.
* options, -ftypeless-boz:               Fortran Dialect Options.
* options, -fugly <1>:                   Shorthand Options.
* options, -fugly:                       Overly Convenient Options.
* options, -fugly-assign:                Fortran Dialect Options.
* options, -fugly-assumed:               Fortran Dialect Options.
* options, -fugly-comma:                 Fortran Dialect Options.
* options, -fugly-complex:               Fortran Dialect Options.
* options, -fugly-logint:                Fortran Dialect Options.
* options, -funix-intrinsics-delete:     Fortran Dialect Options.
* options, -funix-intrinsics-disable:    Fortran Dialect Options.
* options, -funix-intrinsics-enable:     Fortran Dialect Options.
* options, -funix-intrinsics-hide:       Fortran Dialect Options.
* options, -funroll-all-loops:           Optimize Options.
* options, -funroll-loops:               Optimize Options.
* options, -fversion:                    Overall Options.
* options, -fvxt:                        Fortran Dialect Options.
* options, -fvxt-intrinsics-delete:      Fortran Dialect Options.
* options, -fvxt-intrinsics-disable:     Fortran Dialect Options.
* options, -fvxt-intrinsics-enable:      Fortran Dialect Options.
* options, -fvxt-intrinsics-hide:        Fortran Dialect Options.
* options, -fzeros:                      Code Gen Options.
* options, -g:                           Debugging Options.
* options, -I-:                          Directory Options.
* options, -Idir:                        Directory Options.
* options, -malign-double <1>:           Optimize Options.
* options, -malign-double:               Aligned Data.
* options, -Nl:                          Compiler Limits.
* options, -Nx:                          Compiler Limits.
* options, -pedantic:                    Warning Options.
* options, -pedantic-errors:             Warning Options.
* options, -v:                           G77 and GCC.
* options, -W:                           Warning Options.
* options, -w:                           Warning Options.
* options, -Waggregate-return:           Warning Options.
* options, -Wall:                        Warning Options.
* options, -Wcomment:                    Warning Options.
* options, -Wconversion:                 Warning Options.
* options, -Werror:                      Warning Options.
* options, -Wformat:                     Warning Options.
* options, -Wid-clash-LEN:               Warning Options.
* options, -Wimplicit:                   Warning Options.
* options, -Wlarger-than-LEN:            Warning Options.
* options, -Wno-globals:                 Warning Options.
* options, -Wparentheses:                Warning Options.
* options, -Wredundant-decls:            Warning Options.
* options, -Wshadow:                     Warning Options.
* options, -Wsurprising:                 Warning Options.
* options, -Wswitch:                     Warning Options.
* options, -Wtraditional:                Warning Options.
* options, -Wuninitialized:              Warning Options.
* options, -Wunused:                     Warning Options.
* options, adding:                       Adding Options.
* options, code generation:              Code Gen Options.
* options, debugging:                    Debugging Options.
* options, dialect:                      Fortran Dialect Options.
* options, directory search:             Directory Options.
* options, GNU Fortran command:          Invoking G77.
* options, macro:                        Shorthand Options.
* options, negative forms:               Invoking G77.
* options, optimization:                 Optimize Options.
* options, overall:                      Overall Options.
* options, overly convenient:            Overly Convenient Options.
* options, preprocessor:                 Preprocessor Options.
* options, shorthand:                    Shorthand Options.
* Or intrinsic:                          Or Intrinsic.
* OR intrinsic:                          Bit Operations on Floating-point Data.
* order of evaluation, side effects:     Order of Side Effects.
* ordering, array:                       Arrays.
* other intrinsics:                      Other Intrinsics.
* output, flushing <1>:                  Always Flush Output.
* output, flushing:                      Output Assumed To Flush.
* overall options:                       Overall Options.
* overflow:                              Warning Options.
* overlapping arguments:                 Aliasing Assumed To Work.
* overlays:                              Aliasing Assumed To Work.
* overly convenient options:             Overly Convenient Options.
* overwritten data:                      Strange Behavior at Run Time.
* Pack intrinsic:                        Pack Intrinsic.
* packages:                              Unpacking.
* padding:                               Actual Bugs.
* parallel processing:                   Support for Threads.
* PARAMETER statement <1>:               Intrinsics in PARAMETER Statements.
* PARAMETER statement:                   Old-style PARAMETER Statements.
* parameters, unused:                    Warning Options.
* patch files:                           Patching GNU CC Necessary.
* patch files, creating:                 Merging Distributions.
* pedantic compilation:                  Pedantic Compilation.
* Pentium optimizations <1>:             Aligned Data.
* Pentium optimizations <2>:             Use Submodel Options.
* Pentium optimizations:                 Unpacking.
* PError intrinsic:                      PError Intrinsic.
* placing initialization statements:     Initializing Before Specifying.
* POINTER statement:                     POINTER Statements.
* pointers <1>:                          Ugly Assigned Labels.
* pointers:                              Kind Notation.
* porting, simplify:                     Simplify Porting.
* pre-installation checks:               Pre-installation Checks.
* Precision intrinsic:                   Precision Intrinsic.
* precision, increasing:                 Increasing Precision/Range.
* prefix-radix constants:                Fortran Dialect Options.
* preprocessor <1>:                      What is GNU Fortran?.
* preprocessor <2>:                      Overall Options.
* preprocessor:                          Bug Reporting.
* preprocessor options:                  Preprocessor Options.
* prerequisites:                         Prerequisites.
* Present intrinsic:                     Present Intrinsic.
* printing compilation status:           Overall Options.
* printing main source:                  Actual Bugs.
* printing version information <1>:      Overall Options.
* printing version information:          What is GNU Fortran?.
* problems installing:                   Problems Installing.
* procedures:                            Procedures.
* Product intrinsic:                     Product Intrinsic.
* PROGRAM statement:                     Main Program Unit.
* programs named test:                   Nothing Happens.
* programs, cc1:                         What is GNU Fortran?.
* programs, cc1plus:                     What is GNU Fortran?.
* programs, compiling:                   G77 and GCC.
* programs, cpp <1>:                     Preprocessor Options.
* programs, cpp <2>:                     Bug Reporting.
* programs, cpp <3>:                     What is GNU Fortran?.
* programs, cpp:                         Overall Options.
* programs, f771:                        What is GNU Fortran?.
* programs, ratfor:                      Overall Options.
* programs, speeding up:                 Faster Programs.
* projects:                              Projects.
* Q edit descriptor:                     Q Edit Descriptor.
* QAbs intrinsic:                        QAbs Intrinsic.
* QACos intrinsic:                       QACos Intrinsic.
* QACosD intrinsic:                      QACosD Intrinsic.
* QASin intrinsic:                       QASin Intrinsic.
* QASinD intrinsic:                      QASinD Intrinsic.
* QATan intrinsic:                       QATan Intrinsic.
* QATan2 intrinsic:                      QATan2 Intrinsic.
* QATan2D intrinsic:                     QATan2D Intrinsic.
* QATanD intrinsic:                      QATanD Intrinsic.
* QCos intrinsic:                        QCos Intrinsic.
* QCosD intrinsic:                       QCosD Intrinsic.
* QCosH intrinsic:                       QCosH Intrinsic.
* QDiM intrinsic:                        QDiM Intrinsic.
* QExp intrinsic:                        QExp Intrinsic.
* QExt intrinsic:                        QExt Intrinsic.
* QExtD intrinsic:                       QExtD Intrinsic.
* QFloat intrinsic:                      QFloat Intrinsic.
* QInt intrinsic:                        QInt Intrinsic.
* QLog intrinsic:                        QLog Intrinsic.
* QLog10 intrinsic:                      QLog10 Intrinsic.
* QMax1 intrinsic:                       QMax1 Intrinsic.
* QMin1 intrinsic:                       QMin1 Intrinsic.
* QMod intrinsic:                        QMod Intrinsic.
* QNInt intrinsic:                       QNInt Intrinsic.
* QSin intrinsic:                        QSin Intrinsic.
* QSinD intrinsic:                       QSinD Intrinsic.
* QSinH intrinsic:                       QSinH Intrinsic.
* QSqRt intrinsic:                       QSqRt Intrinsic.
* QTan intrinsic:                        QTan Intrinsic.
* QTanD intrinsic:                       QTanD Intrinsic.
* QTanH intrinsic:                       QTanH Intrinsic.
* questionable instructions:             What is GNU Fortran?.
* quick start:                           Quick Start.
* Radix intrinsic:                       Radix Intrinsic.
* Rand intrinsic:                        Rand Intrinsic.
* Random_Number intrinsic:               Random_Number Intrinsic.
* Random_Seed intrinsic:                 Random_Seed Intrinsic.
* Range intrinsic:                       Range Intrinsic.
* range, increasing:                     Increasing Precision/Range.
* rank, maximum:                         Compiler Limits.
* Ratfor preprocessor:                   Overall Options.
* reads and writes, scheduling:          Aliasing Assumed To Work.
* Real intrinsic:                        Real Intrinsic.
* REAL intrinsic:                        REAL() and AIMAG() of Complex.
* real part:                             Ugly Complex Part Extraction.
* REAL(KIND=1) type:                     Compiler Types.
* REAL(KIND=2) type:                     Compiler Types.
* REAL*16 support:                       Full Support for Compiler Types.
* RealPart intrinsic:                    RealPart Intrinsic.
* recent versions <1>:                   Changes.
* recent versions:                       News.
* RECORD statement:                      STRUCTURE UNION RECORD MAP.
* recursion, lack of:                    RECURSIVE Keyword.
* RECURSIVE keyword:                     RECURSIVE Keyword.
* reference works:                       Language.
* Rename intrinsic <1>:                  Rename Intrinsic (function).
* Rename intrinsic:                      Rename Intrinsic (subroutine).
* Repeat intrinsic:                      Repeat Intrinsic.
* reporting bugs:                        Bugs.
* reporting compilation status:          Overall Options.
* requirements, GNU C:                   GNU C Required.
* Reshape intrinsic:                     Reshape Intrinsic.
* results, inconsistent:                 Floating-point Errors.
* RETURN statement <1>:                  Functions.
* RETURN statement:                      Alternate Returns.
* return type of functions:              Functions.
* rounding errors:                       Floating-point Errors.
* row-major ordering:                    Arrays.
* RRSpacing intrinsic:                   RRSpacing Intrinsic.
* RShift intrinsic:                      RShift Intrinsic.
* run-time library:                      What is GNU Fortran?.
* run-time options:                      Code Gen Options.
* runtime initialization:                Startup Code.
* SAVE statement:                        Code Gen Options.
* saved variables:                       Variables Assumed To Be Saved.
* Scale intrinsic:                       Scale Intrinsic.
* Scan intrinsic:                        Scan Intrinsic.
* scheduling of reads and writes:        Aliasing Assumed To Work.
* scope <1>:                             Scope and Classes of Names.
* scope:                                 Scope of Names and Labels.
* search path:                           Directory Options.
* searching for included files:          Directory Options.
* Secnds intrinsic:                      Secnds Intrinsic.
* Second intrinsic <1>:                  Second Intrinsic (subroutine).
* Second intrinsic:                      Second Intrinsic (function).
* segmentation violation <1>:            NeXTStep Problems.
* segmentation violation <2>:            Strange Behavior at Run Time.
* segmentation violation <3>:            Stack Overflow.
* segmentation violation:                Maximum Stackable Size.
* Selected_Int_Kind intrinsic:           Selected_Int_Kind Intrinsic.
* Selected_Real_Kind intrinsic:          Selected_Real_Kind Intrinsic.
* semicolons:                            Statements Comments Lines.
* separate distributions:                Merging Distributions.
* sequence numbers:                      Better Source Model.
* Set_Exponent intrinsic:                Set_Exponent Intrinsic.
* SGI:                                   System-specific Problems.
* Shape intrinsic:                       Shape Intrinsic.
* SHIFT intrinsic:                       Bit Operations on Floating-point Data.
* Short intrinsic:                       Short Intrinsic.
* short source lines:                    Short Lines.
* shorthand options:                     Shorthand Options.
* side effects, order of evaluation:     Order of Side Effects.
* Sign intrinsic:                        Sign Intrinsic.
* signal 11:                             Signal 11 and Friends.
* Signal intrinsic <1>:                  Signal Intrinsic (subroutine).
* Signal intrinsic:                      Signal Intrinsic (function).
* signature of procedures:               Procedures.
* simplify porting:                      Simplify Porting.
* Sin intrinsic:                         Sin Intrinsic.
* SinD intrinsic:                        SinD Intrinsic.
* SinH intrinsic:                        SinH Intrinsic.
* Sleep intrinsic:                       Sleep Intrinsic.
* slow compiler:                         Large Initialization.
* Sngl intrinsic:                        Sngl Intrinsic.
* SnglQ intrinsic:                       SnglQ Intrinsic.
* Solaris:                               Strange Behavior at Run Time.
* source code <1>:                       Source Form.
* source code <2>:                       What is GNU Fortran?.
* source code <3>:                       Case Sensitivity.
* source code <4>:                       Unpacking.
* source code:                           Lines.
* source file:                           What is GNU Fortran?.
* source file form:                      Fortran Dialect Options.
* source file format <1>:                Case Sensitivity.
* source file format <2>:                Fortran Dialect Options.
* source file format <3>:                Lines.
* source file format:                    Source Form.
* source form <1>:                       Lines.
* source form:                           Source Form.
* source lines, long:                    Long Lines.
* source lines, short:                   Short Lines.
* source tree:                           Unpacking.
* space-padding:                         Short Lines.
* spaces:                                Short Lines.
* spaces, endless printing of:           Strange Behavior at Run Time.
* Spacing intrinsic:                     Spacing Intrinsic.
* speed, compiler:                       Large Initialization.
* speed, of compiler:                    Actual Bugs.
* speeding up loops:                     Optimize Options.
* speeding up programs:                  Faster Programs.
* Spread intrinsic:                      Spread Intrinsic.
* SqRt intrinsic:                        SqRt Intrinsic.
* SRand intrinsic:                       SRand Intrinsic.
* stack allocation:                      Maximum Stackable Size.
* stack overflow:                        Stack Overflow.
* stack, 387 coprocessor:                News.
* stack, aligned:                        Aligned Data.
* stage directories:                     Cleanup Kills Stage Directories.
* standard support:                      Standard Support.
* standard, ANSI FORTRAN 77:             Language.
* startup code:                          Startup Code.
* Stat intrinsic <1>:                    Stat Intrinsic (subroutine).
* Stat intrinsic:                        Stat Intrinsic (function).
* statement labels, assigned:            Assigned Statement Labels.
* statements, ACCEPT:                    TYPE and ACCEPT I/O Statements.
* statements, ASSIGN <1>:                Assigned Statement Labels.
* statements, ASSIGN:                    Ugly Assigned Labels.
* statements, BLOCK DATA <1>:            Multiple Definitions of External Names.
* statements, BLOCK DATA:                Block Data and Libraries.
* statements, CLOSE:                     OPEN CLOSE and INQUIRE Keywords.
* statements, COMMON <1>:                Multiple Definitions of External Names.
* statements, COMMON:                    Common Blocks.
* statements, COMPLEX:                   Complex Variables.
* statements, DATA <1>:                  Code Gen Options.
* statements, DATA:                      Actual Bugs.
* statements, DECODE:                    ENCODE and DECODE.
* statements, DIMENSION <1>:             Adjustable Arrays.
* statements, DIMENSION <2>:             Arrays.
* statements, DIMENSION:                 Array Bounds Expressions.
* statements, DO <1>:                    Warning Options.
* statements, DO:                        Loops.
* statements, ENCODE:                    ENCODE and DECODE.
* statements, ENTRY:                     Alternate Entry Points.
* statements, EQUIVALENCE:               Local Equivalence Areas.
* statements, FORMAT:                    Expressions in FORMAT Statements.
* statements, FUNCTION <1>:              Functions.
* statements, FUNCTION:                  Procedures.
* statements, GOTO:                      Assigned Statement Labels.
* statements, IMPLICIT CHARACTER*(*):    Limitation on Implicit Declarations.
* statements, INQUIRE:                   OPEN CLOSE and INQUIRE Keywords.
* statements, MAP:                       STRUCTURE UNION RECORD MAP.
* statements, NAMELIST:                  NAMELIST.
* statements, OPEN:                      OPEN CLOSE and INQUIRE Keywords.
* statements, PARAMETER <1>:             Old-style PARAMETER Statements.
* statements, PARAMETER:                 Intrinsics in PARAMETER Statements.
* statements, POINTER:                   POINTER Statements.
* statements, PROGRAM:                   Main Program Unit.
* statements, RECORD:                    STRUCTURE UNION RECORD MAP.
* statements, RETURN <1>:                Functions.
* statements, RETURN:                    Alternate Returns.
* statements, SAVE:                      Code Gen Options.
* statements, separated by semicolon:    Statements Comments Lines.
* statements, STRUCTURE:                 STRUCTURE UNION RECORD MAP.
* statements, SUBROUTINE <1>:            Procedures.
* statements, SUBROUTINE:                Alternate Returns.
* statements, TYPE:                      TYPE and ACCEPT I/O Statements.
* statements, UNION:                     STRUCTURE UNION RECORD MAP.
* static variables:                      Variables Assumed To Be Saved.
* status, compilation:                   Overall Options.
* storage association:                   Aliasing Assumed To Work.
* straight build:                        Straight Build.
* strings, empty:                        Character Type.
* strtoul:                               Missing strtoul.
* STRUCTURE statement:                   STRUCTURE UNION RECORD MAP.
* structures:                            Actual Bugs.
* submodels:                             Use Submodel Options.
* SUBROUTINE statement <1>:              Alternate Returns.
* SUBROUTINE statement:                  Procedures.
* subroutines:                           Alternate Returns.
* suffixes, file name:                   Overall Options.
* Sum intrinsic:                         Sum Intrinsic.
* SunOS4 <1>:                            Missing strtoul.
* SunOS4:                                Quick Start.
* support for ANSI FORTRAN 77:           Standard Support.
* support for gcc versions:              Merging Distributions.
* support, Alpha:                        Actual Bugs.
* support, COMPLEX:                      Actual Bugs.
* support, ELF:                          Actual Bugs.
* support, f77:                          Backslash in Constants.
* support, Fortran 90:                   Fortran 90 Support.
* support, gdb:                          Debugger Problems.
* suppressing warnings:                  Warning Options.
* symbol names <1>:                      Fortran Dialect Options.
* symbol names:                          Names.
* symbol names, transforming:            Code Gen Options.
* symbol names, underscores:             Code Gen Options.
* symbolic names:                        Scope and Classes of Names.
* SymLnk intrinsic <1>:                  SymLnk Intrinsic (function).
* SymLnk intrinsic:                      SymLnk Intrinsic (subroutine).
* synchronous write errors <1>:          Output Assumed To Flush.
* synchronous write errors:              Always Flush Output.
* syntax checking:                       Warning Options.
* System intrinsic <1>:                  System Intrinsic (function).
* System intrinsic:                      System Intrinsic (subroutine).
* System_Clock intrinsic:                System_Clock Intrinsic.
* tab characters:                        Tabs.
* table of intrinsics:                   Table of Intrinsic Functions.
* Tan intrinsic:                         Tan Intrinsic.
* TanD intrinsic:                        TanD Intrinsic.
* TanH intrinsic:                        TanH Intrinsic.
* test programs:                         Nothing Happens.
* texinfo:                               Updating Documentation.
* textbooks:                             Language.
* threads:                               Support for Threads.
* Time intrinsic <1>:                    Time Intrinsic (VXT).
* Time intrinsic:                        Time Intrinsic (UNIX).
* Time8 intrinsic:                       Time8 Intrinsic.
* Tiny intrinsic:                        Tiny Intrinsic.
* Toolpack:                              Increasing Precision/Range.
* trailing commas:                       Ugly Null Arguments.
* trailing comments:                     Statements Comments Lines.
* trailing null byte:                    Character and Hollerith Constants.
* Transfer intrinsic:                    Transfer Intrinsic.
* transformation of symbol names:        Names.
* transforming symbol names:             Code Gen Options.
* translation of user programs:          What is GNU Fortran?.
* Transpose intrinsic:                   Transpose Intrinsic.
* Trim intrinsic:                        Trim Intrinsic.
* trips, number of:                      Loops.
* truncation:                            Long Lines.
* TtyNam intrinsic <1>:                  TtyNam Intrinsic (function).
* TtyNam intrinsic:                      TtyNam Intrinsic (subroutine).
* TYPE statement:                        TYPE and ACCEPT I/O Statements.
* types, COMPLEX(KIND=1):                Compiler Types.
* types, COMPLEX(KIND=2):                Compiler Types.
* types, constants <1>:                  Fortran Dialect Options.
* types, constants <2>:                  Compiler Constants.
* types, constants:                      Constants.
* types, DOUBLE COMPLEX:                 Compiler Types.
* types, DOUBLE PRECISION:               Compiler Types.
* types, file:                           Overall Options.
* types, Fortran/C:                      C Access to Type Information.
* types, INTEGER(KIND=1):                Compiler Types.
* types, INTEGER(KIND=2):                Compiler Types.
* types, INTEGER(KIND=3):                Compiler Types.
* types, INTEGER(KIND=6):                Compiler Types.
* types, LOGICAL(KIND=1):                Compiler Types.
* types, LOGICAL(KIND=2):                Compiler Types.
* types, LOGICAL(KIND=3):                Compiler Types.
* types, LOGICAL(KIND=6):                Compiler Types.
* types, of data:                        Compiler Types.
* types, REAL(KIND=1):                   Compiler Types.
* types, REAL(KIND=2):                   Compiler Types.
* UBound intrinsic:                      UBound Intrinsic.
* ugly features <1>:                     Distensions.
* ugly features:                         Shorthand Options.
* UMask intrinsic <1>:                   UMask Intrinsic (function).
* UMask intrinsic:                       UMask Intrinsic (subroutine).
* undefined behavior:                    Bug Criteria.
* undefined function value:              Bug Criteria.
* undefined reference (_main):           Cannot Link Fortran Programs.
* undefined reference (_strtoul):        Missing strtoul.
* underscores <1>:                       Code Gen Options.
* underscores <2>:                       Mangling of Names.
* underscores <3>:                       Code Gen Options.
* underscores:                           Underscores in Symbol Names.
* uninitialized variables <1>:           Code Gen Options.
* uninitialized variables <2>:           Variables Assumed To Be Zero.
* uninitialized variables:               Warning Options.
* UNION statement:                       STRUCTURE UNION RECORD MAP.
* unit numbers <1>:                      Larger File Unit Numbers.
* unit numbers:                          Large File Unit Numbers.
* UNIX f77:                              Shorthand Options.
* UNIX intrinsics:                       Fortran Dialect Options.
* Unlink intrinsic <1>:                  Unlink Intrinsic (subroutine).
* Unlink intrinsic:                      Unlink Intrinsic (function).
* Unpack intrinsic:                      Unpack Intrinsic.
* unpacking distributions:               Unpacking.
* unrecognized file format:              What is GNU Fortran?.
* unresolved reference (various):        Cannot Link Fortran Programs.
* unrolling loops:                       Optimize Options.
* unsupported warnings:                  Warning Options.
* unused arguments <1>:                  Unused Arguments.
* unused arguments:                      Warning Options.
* unused dummies:                        Warning Options.
* unused parameters:                     Warning Options.
* unused variables:                      Warning Options.
* updating info directory:               Updating Documentation.
* uppercase letters:                     Case Sensitivity.
* user-visible changes:                  Changes.
* variables assumed to be zero:          Variables Assumed To Be Zero.
* variables retaining values across calls: Variables Assumed To Be Saved.
* variables, initialization of:          Code Gen Options.
* variables, mistyped:                   Not My Type.
* variables, uninitialized <1>:          Code Gen Options.
* variables, uninitialized:              Warning Options.
* variables, unused:                     Warning Options.
* Verify intrinsic:                      Verify Intrinsic.
* version information, printing <1>:     What is GNU Fortran?.
* version information, printing:         Overall Options.
* version numbering:                     Merging Distributions.
* versions of gcc:                       Merging Distributions.
* versions, recent <1>:                  News.
* versions, recent:                      Changes.
* VXT extensions:                        VXT Fortran.
* VXT features:                          Fortran Dialect Options.
* VXT intrinsics:                        Fortran Dialect Options.
* warning messages:                      Warning Options.
* warnings:                              What is GNU Fortran?.
* warnings vs errors:                    Warnings and Errors.
* warnings, all:                         Warning Options.
* warnings, extra:                       Warning Options.
* warnings, global names <1>:            Warning Options.
* warnings, global names:                Code Gen Options.
* warnings, implicit declaration:        Warning Options.
* warnings, unsupported:                 Warning Options.
* why separate distributions:            Merging Distributions.
* wisdom:                                Collected Fortran Wisdom.
* writes, flushing <1>:                  Always Flush Output.
* writes, flushing:                      Output Assumed To Flush.
* writing code:                          Collected Fortran Wisdom.
* XOr intrinsic:                         XOr Intrinsic.
* ZAbs intrinsic:                        ZAbs Intrinsic.
* ZCos intrinsic:                        ZCos Intrinsic.
* zero byte, trailing:                   Character and Hollerith Constants.
* zero-initialized variables:            Variables Assumed To Be Zero.
* zero-length CHARACTER:                 Character Type.
* ZExp intrinsic:                        ZExp Intrinsic.
* ZExt intrinsic:                        ZExt Intrinsic.
* ZLog intrinsic:                        ZLog Intrinsic.
* ZSin intrinsic:                        ZSin Intrinsic.
* ZSqRt intrinsic:                       ZSqRt Intrinsic.
* zzz.c:                                 Object File Differences.
* zzz.o:                                 Object File Differences.



Tag Table:
Node: Top1690
Node: Copying3647
Node: Contributors22829
Node: Funding25861
Node: Funding GNU Fortran28364
Node: Look and Feel31021
Node: Getting Started31523
Node: What is GNU Fortran?33841
Node: G77 and GCC43406
Node: Invoking G7744757
Node: Option Summary46908
Node: Overall Options51600
Node: Shorthand Options57688
Node: Fortran Dialect Options60166
Node: Warning Options71427
Node: Debugging Options80313
Node: Optimize Options81386
Node: Preprocessor Options84831
Node: Directory Options86012
Node: Code Gen Options87324
Node: Environment Variables102635
Node: News103093
Node: Changes152800
Node: Language166836
Node: Direction of Language Development168776
Node: Standard Support175015
Node: No Passing External Assumed-length175736
Node: No Passing Dummy Assumed-length176213
Node: No Pathological Implied-DO176728
Node: No Useless Implied-DO177415
Node: Conformance178146
Node: Notation Used180169
Node: Terms and Concepts184374
Node: Syntactic Items184886
Node: Statements Comments Lines185568
Node: Scope of Names and Labels187433
Node: Characters Lines Sequence187863
Node: Character Set188444
Node: Lines189445
Node: Continuation Line191921
Node: Statements192876
Node: Statement Labels193832
Node: Order194524
Node: INCLUDE195409
Node: Data Types and Constants198152
Node: Types201673
Node: Double Notation202762
Node: Star Notation203834
Node: Kind Notation206779
Node: Constants215199
Node: Integer Type216511
Node: Character Type217109
Node: Expressions217873
Node: %LOC()218289
Node: Specification Statements220990
Node: NAMELIST221447
Node: DOUBLE COMPLEX221729
Node: Control Statements221983
Node: DO WHILE222475
Node: END DO222701
Node: Construct Names223708
Node: CYCLE and EXIT224448
Node: Functions and Subroutines227212
Node: %VAL()227858
Node: %REF()229222
Node: %DESCR()231050
Node: Generics and Specifics233183
Node: REAL() and AIMAG() of Complex240371
Node: CMPLX() of DOUBLE PRECISION242204
Node: MIL-STD 1753243930
Node: f77/f2c Intrinsics244272
Node: Table of Intrinsic Functions244842
Node: Abort Intrinsic261549
Node: Abs Intrinsic261813
Node: Access Intrinsic262681
Node: AChar Intrinsic263517
Node: ACos Intrinsic264039
Node: AdjustL Intrinsic264500
Node: AdjustR Intrinsic264825
Node: AImag Intrinsic265151
Node: AInt Intrinsic265956
Node: Alarm Intrinsic266584
Node: All Intrinsic267420
Node: Allocated Intrinsic267732
Node: ALog Intrinsic268061
Node: ALog10 Intrinsic268451
Node: AMax0 Intrinsic268849
Node: AMax1 Intrinsic269334
Node: AMin0 Intrinsic269787
Node: AMin1 Intrinsic270271
Node: AMod Intrinsic270723
Node: And Intrinsic271149
Node: ANInt Intrinsic271655
Node: Any Intrinsic272419
Node: ASin Intrinsic272726
Node: Associated Intrinsic273184
Node: ATan Intrinsic273518
Node: ATan2 Intrinsic273984
Node: BesJ0 Intrinsic274535
Node: BesJ1 Intrinsic274996
Node: BesJN Intrinsic275457
Node: BesY0 Intrinsic275956
Node: BesY1 Intrinsic276418
Node: BesYN Intrinsic276880
Node: Bit_Size Intrinsic277383
Node: BTest Intrinsic278042
Node: CAbs Intrinsic278762
Node: CCos Intrinsic279149
Node: Ceiling Intrinsic279541
Node: CExp Intrinsic279863
Node: Char Intrinsic280255
Node: ChDir Intrinsic (subroutine)281509
Node: ChMod Intrinsic (subroutine)282511
Node: CLog Intrinsic283780
Node: Cmplx Intrinsic284184
Node: Complex Intrinsic284985
Node: Conjg Intrinsic286431
Node: Cos Intrinsic286855
Node: CosH Intrinsic287318
Node: Count Intrinsic287693
Node: CPU_Time Intrinsic288011
Node: CShift Intrinsic288466
Node: CSin Intrinsic288788
Node: CSqRt Intrinsic289180
Node: CTime Intrinsic (subroutine)289590
Node: CTime Intrinsic (function)290345
Node: DAbs Intrinsic290979
Node: DACos Intrinsic291375
Node: DASin Intrinsic291766
Node: DATan Intrinsic292158
Node: DATan2 Intrinsic292551
Node: Date_and_Time Intrinsic293006
Node: DbesJ0 Intrinsic293356
Node: DbesJ1 Intrinsic293749
Node: DbesJN Intrinsic294135
Node: DbesY0 Intrinsic294559
Node: DbesY1 Intrinsic294945
Node: DbesYN Intrinsic295331
Node: Dble Intrinsic295753
Node: DCos Intrinsic296459
Node: DCosH Intrinsic296843
Node: DDiM Intrinsic297233
Node: DErF Intrinsic297665
Node: DErFC Intrinsic298034
Node: DExp Intrinsic298409
Node: Digits Intrinsic298795
Node: DiM Intrinsic299112
Node: DInt Intrinsic299611
Node: DLog Intrinsic299995
Node: DLog10 Intrinsic300380
Node: DMax1 Intrinsic300778
Node: DMin1 Intrinsic301232
Node: DMod Intrinsic301684
Node: DNInt Intrinsic302112
Node: Dot_Product Intrinsic302511
Node: DProd Intrinsic302851
Node: DSign Intrinsic303233
Node: DSin Intrinsic303672
Node: DSinH Intrinsic304057
Node: DSqRt Intrinsic304448
Node: DTan Intrinsic304839
Node: DTanH Intrinsic305224
Node: Dtime Intrinsic (subroutine)305628
Node: EOShift Intrinsic306563
Node: Epsilon Intrinsic306902
Node: ErF Intrinsic307226
Node: ErFC Intrinsic307632
Node: ETime Intrinsic (subroutine)308190
Node: ETime Intrinsic (function)309017
Node: Exit Intrinsic309721
Node: Exp Intrinsic310198
Node: Exponent Intrinsic310660
Node: Fdate Intrinsic (subroutine)310999
Node: Fdate Intrinsic (function)311687
Node: FGet Intrinsic (subroutine)312237
Node: FGetC Intrinsic (subroutine)313074
Node: Float Intrinsic313951
Node: Floor Intrinsic314351
Node: Flush Intrinsic314667
Node: FNum Intrinsic315246
Node: FPut Intrinsic (subroutine)315694
Node: FPutC Intrinsic (subroutine)316491
Node: Fraction Intrinsic317338
Node: FSeek Intrinsic317679
Node: FStat Intrinsic (subroutine)318404
Node: FStat Intrinsic (function)319873
Node: FTell Intrinsic (subroutine)321107
Node: FTell Intrinsic (function)321780
Node: GError Intrinsic322297
Node: GetArg Intrinsic322671
Node: GetCWD Intrinsic (subroutine)323307
Node: GetCWD Intrinsic (function)324163
Node: GetEnv Intrinsic324783
Node: GetGId Intrinsic325370
Node: GetLog Intrinsic325676
Node: GetPId Intrinsic326214
Node: GetUId Intrinsic326522
Node: GMTime Intrinsic326827
Node: HostNm Intrinsic (subroutine)327835
Node: HostNm Intrinsic (function)328707
Node: Huge Intrinsic329332
Node: IAbs Intrinsic329655
Node: IAChar Intrinsic330046
Node: IAnd Intrinsic330586
Node: IArgC Intrinsic331074
Node: IBClr Intrinsic331450
Node: IBits Intrinsic331960
Node: IBSet Intrinsic332674
Node: IChar Intrinsic333175
Node: IDate Intrinsic (UNIX)334394
Node: IDiM Intrinsic334975
Node: IDInt Intrinsic335424
Node: IDNInt Intrinsic335817
Node: IEOr Intrinsic336216
Node: IErrNo Intrinsic336714
Node: IFix Intrinsic337041
Node: Imag Intrinsic337429
Node: ImagPart Intrinsic338434
Node: Index Intrinsic339460
Node: Int Intrinsic340013
Node: Int2 Intrinsic340728
Node: Int8 Intrinsic341438
Node: IOr Intrinsic342148
Node: IRand Intrinsic342628
Node: IsaTty Intrinsic343548
Node: IShft Intrinsic343972
Node: IShftC Intrinsic344822
Node: ISign Intrinsic345750
Node: ITime Intrinsic346200
Node: Kill Intrinsic (subroutine)346602
Node: Kind Intrinsic347439
Node: LBound Intrinsic347764
Node: Len Intrinsic348081
Node: Len_Trim Intrinsic348717
Node: LGe Intrinsic349129
Node: LGt Intrinsic350542
Node: Link Intrinsic (subroutine)351448
Node: LLe Intrinsic352413
Node: LLt Intrinsic353319
Node: LnBlnk Intrinsic354214
Node: Loc Intrinsic354617
Node: Log Intrinsic355048
Node: Log10 Intrinsic355628
Node: Logical Intrinsic356201
Node: Long Intrinsic356524
Node: LShift Intrinsic357048
Node: LStat Intrinsic (subroutine)358084
Node: LStat Intrinsic (function)359840
Node: LTime Intrinsic361347
Node: MatMul Intrinsic362351
Node: Max Intrinsic362669
Node: Max0 Intrinsic363220
Node: Max1 Intrinsic363671
Node: MaxExponent Intrinsic364155
Node: MaxLoc Intrinsic364495
Node: MaxVal Intrinsic364822
Node: MClock Intrinsic365144
Node: MClock8 Intrinsic365871
Node: Merge Intrinsic366589
Node: Min Intrinsic366905
Node: Min0 Intrinsic367456
Node: Min1 Intrinsic367907
Node: MinExponent Intrinsic368391
Node: MinLoc Intrinsic368731
Node: MinVal Intrinsic369058
Node: Mod Intrinsic369377
Node: Modulo Intrinsic369900
Node: MvBits Intrinsic370219
Node: Nearest Intrinsic371085
Node: NInt Intrinsic371409
Node: Not Intrinsic372247
Node: Or Intrinsic372642
Node: Pack Intrinsic373140
Node: PError Intrinsic373450
Node: Precision Intrinsic373904
Node: Present Intrinsic374239
Node: Product Intrinsic374569
Node: Radix Intrinsic374895
Node: Rand Intrinsic375212
Node: Random_Number Intrinsic376099
Node: Random_Seed Intrinsic376452
Node: Range Intrinsic376800
Node: Real Intrinsic377121
Node: RealPart Intrinsic378127
Node: Rename Intrinsic (subroutine)379160
Node: Repeat Intrinsic380132
Node: Reshape Intrinsic380468
Node: RRSpacing Intrinsic380797
Node: RShift Intrinsic381132
Node: Scale Intrinsic382130
Node: Scan Intrinsic382446
Node: Second Intrinsic (function)382770
Node: Second Intrinsic (subroutine)383265
Node: Selected_Int_Kind Intrinsic383903
Node: Selected_Real_Kind Intrinsic384294
Node: Set_Exponent Intrinsic384681
Node: Shape Intrinsic385038
Node: Short Intrinsic385361
Node: Sign Intrinsic386057
Node: Signal Intrinsic (subroutine)386657
Node: Sin Intrinsic388871
Node: SinH Intrinsic389346
Node: Sleep Intrinsic389719
Node: Sngl Intrinsic390061
Node: Spacing Intrinsic390450
Node: Spread Intrinsic390774
Node: SqRt Intrinsic391095
Node: SRand Intrinsic391699
Node: Stat Intrinsic (subroutine)392076
Node: Stat Intrinsic (function)393635
Node: Sum Intrinsic394943
Node: SymLnk Intrinsic (subroutine)395275
Node: System Intrinsic (subroutine)396307
Node: System_Clock Intrinsic397246
Node: Tan Intrinsic398014
Node: TanH Intrinsic398474
Node: Time Intrinsic (UNIX)398856
Node: Time8 Intrinsic399670
Node: Tiny Intrinsic400383
Node: Transfer Intrinsic400698
Node: Transpose Intrinsic401029
Node: Trim Intrinsic401363
Node: TtyNam Intrinsic (subroutine)401693
Node: TtyNam Intrinsic (function)402392
Node: UBound Intrinsic402961
Node: UMask Intrinsic (subroutine)403306
Node: Unlink Intrinsic (subroutine)404003
Node: Unpack Intrinsic404901
Node: Verify Intrinsic405236
Node: XOr Intrinsic405555
Node: ZAbs Intrinsic406071
Node: ZCos Intrinsic406440
Node: ZExp Intrinsic406813
Node: ZLog Intrinsic407186
Node: ZSin Intrinsic407559
Node: ZSqRt Intrinsic407933
Node: Scope and Classes of Names408290
Node: Underscores in Symbol Names408760
Node: Other Dialects409007
Node: Source Form410166
Node: Carriage Returns411517
Node: Tabs411846
Node: Short Lines413555
Node: Long Lines414529
Node: Ampersands415140
Node: Trailing Comment415394
Node: Debug Line416170
Node: Dollar Signs416839
Node: Case Sensitivity417125
Node: VXT Fortran425741
Node: Double Quote Meaning426924
Node: Exclamation Point427852
Node: Fortran 90428895
Node: Pedantic Compilation429947
Node: Distensions433911
Node: Ugly Implicit Argument Conversion435442
Node: Ugly Assumed-Size Arrays436056
Node: Ugly Complex Part Extraction437777
Node: Ugly Null Arguments439399
Node: Ugly Conversion of Initializers441002
Node: Ugly Integer Conversions442767
Node: Ugly Assigned Labels443875
Node: Compiler445806
Node: Compiler Limits446412
Node: Compiler Types447295
Node: Compiler Constants451994
Node: Compiler Intrinsics452853
Node: Intrinsic Groups453780
Node: Other Intrinsics457221
Node: ACosD Intrinsic464819
Node: AIMax0 Intrinsic465100
Node: AIMin0 Intrinsic465409
Node: AJMax0 Intrinsic465719
Node: AJMin0 Intrinsic466029
Node: ASinD Intrinsic466338
Node: ATan2D Intrinsic466644
Node: ATanD Intrinsic466952
Node: BITest Intrinsic467258
Node: BJTest Intrinsic467567
Node: CDAbs Intrinsic467876
Node: CDCos Intrinsic468249
Node: CDExp Intrinsic468624
Node: CDLog Intrinsic468999
Node: CDSin Intrinsic469374
Node: CDSqRt Intrinsic469750
Node: ChDir Intrinsic (function)470143
Node: ChMod Intrinsic (function)470970
Node: CosD Intrinsic472082
Node: DACosD Intrinsic472394
Node: DASinD Intrinsic472702
Node: DATan2D Intrinsic473013
Node: DATanD Intrinsic473327
Node: Date Intrinsic473636
Node: DbleQ Intrinsic474265
Node: DCmplx Intrinsic474569
Node: DConjg Intrinsic476200
Node: DCosD Intrinsic476585
Node: DFloat Intrinsic476891
Node: DFlotI Intrinsic477263
Node: DFlotJ Intrinsic477573
Node: DImag Intrinsic477882
Node: DReal Intrinsic478259
Node: DSinD Intrinsic479406
Node: DTanD Intrinsic479710
Node: Dtime Intrinsic (function)480025
Node: FGet Intrinsic (function)480919
Node: FGetC Intrinsic (function)481692
Node: FloatI Intrinsic482508
Node: FloatJ Intrinsic482828
Node: FPut Intrinsic (function)483147
Node: FPutC Intrinsic (function)483883
Node: IDate Intrinsic (VXT)484676
Node: IIAbs Intrinsic485395
Node: IIAnd Intrinsic485705
Node: IIBClr Intrinsic486010
Node: IIBits Intrinsic486319
Node: IIBSet Intrinsic486629
Node: IIDiM Intrinsic486938
Node: IIDInt Intrinsic487244
Node: IIDNnt Intrinsic487553
Node: IIEOr Intrinsic487862
Node: IIFix Intrinsic488167
Node: IInt Intrinsic488470
Node: IIOr Intrinsic488769
Node: IIQint Intrinsic489069
Node: IIQNnt Intrinsic489377
Node: IIShftC Intrinsic489688
Node: IISign Intrinsic490002
Node: IMax0 Intrinsic490312
Node: IMax1 Intrinsic490617
Node: IMin0 Intrinsic490921
Node: IMin1 Intrinsic491225
Node: IMod Intrinsic491528
Node: INInt Intrinsic491828
Node: INot Intrinsic492130
Node: IZExt Intrinsic492430
Node: JIAbs Intrinsic492733
Node: JIAnd Intrinsic493037
Node: JIBClr Intrinsic493342
Node: JIBits Intrinsic493651
Node: JIBSet Intrinsic493961
Node: JIDiM Intrinsic494270
Node: JIDInt Intrinsic494576
Node: JIDNnt Intrinsic494885
Node: JIEOr Intrinsic495194
Node: JIFix Intrinsic495499
Node: JInt Intrinsic495802
Node: JIOr Intrinsic496101
Node: JIQint Intrinsic496401
Node: JIQNnt Intrinsic496709
Node: JIShft Intrinsic497019
Node: JIShftC Intrinsic497330
Node: JISign Intrinsic497644
Node: JMax0 Intrinsic497954
Node: JMax1 Intrinsic498259
Node: JMin0 Intrinsic498563
Node: JMin1 Intrinsic498867
Node: JMod Intrinsic499170
Node: JNInt Intrinsic499470
Node: JNot Intrinsic499772
Node: JZExt Intrinsic500072
Node: Kill Intrinsic (function)500385
Node: Link Intrinsic (function)501067
Node: QAbs Intrinsic501879
Node: QACos Intrinsic502189
Node: QACosD Intrinsic502493
Node: QASin Intrinsic502801
Node: QASinD Intrinsic503107
Node: QATan Intrinsic503415
Node: QATan2 Intrinsic503721
Node: QATan2D Intrinsic504031
Node: QATanD Intrinsic504345
Node: QCos Intrinsic504654
Node: QCosD Intrinsic504955
Node: QCosH Intrinsic505258
Node: QDiM Intrinsic505561
Node: QExp Intrinsic505860
Node: QExt Intrinsic506158
Node: QExtD Intrinsic506457
Node: QFloat Intrinsic506761
Node: QInt Intrinsic507068
Node: QLog Intrinsic507368
Node: QLog10 Intrinsic507668
Node: QMax1 Intrinsic507975
Node: QMin1 Intrinsic508280
Node: QMod Intrinsic508583
Node: QNInt Intrinsic508883
Node: QSin Intrinsic509185
Node: QSinD Intrinsic509485
Node: QSinH Intrinsic509788
Node: QSqRt Intrinsic510092
Node: QTan Intrinsic510395
Node: QTanD Intrinsic510695
Node: QTanH Intrinsic510998
Node: Rename Intrinsic (function)511314
Node: Secnds Intrinsic512119
Node: Signal Intrinsic (function)512494
Node: SinD Intrinsic515323
Node: SnglQ Intrinsic515635
Node: SymLnk Intrinsic (function)515950
Node: System Intrinsic (function)516818
Node: TanD Intrinsic518145
Node: Time Intrinsic (VXT)518462
Node: UMask Intrinsic (function)518993
Node: Unlink Intrinsic (function)519601
Node: ZExt Intrinsic520330
Node: Other Compilers520618
Node: Dropping f2c Compatibility522998
Node: Compilers Other Than f2c525824
Node: Other Languages527623
Node: Interoperating with C and C++527875
Node: C Interfacing Tools528908
Node: C Access to Type Information529836
Node: f2c Skeletons and Prototypes530523
Node: C++ Considerations532221
Node: Startup Code532876
Node: Installation533787
Node: Prerequisites534943
Node: Problems Installing543430
Node: General Problems544125
Node: GNU C Required544898
Node: Patching GNU CC Necessary545599
Node: Building GNU CC Necessary546449
Node: Missing strtoul546795
Node: Object File Differences548209
Node: Cleanup Kills Stage Directories548906
Node: Missing gperf?549326
Node: System-specific Problems550737
Node: Cross-compiler Problems551390
Node: Settings553603
Node: Larger File Unit Numbers554681
Node: Always Flush Output556264
Node: Maximum Stackable Size558124
Node: Floating-point Bit Patterns558980
Node: Large Initialization559735
Node: Alpha Problems Fixed561324
Node: Quick Start562211
Node: Complete Installation572947
Node: Unpacking573527
Node: Merging Distributions576616
Node: Installing f77582333
Node: Installing f2c583678
Node: Patching GNU Fortran586603
Node: Where to Install588121
Node: Configuring gcc591466
Node: Building gcc593238
Node: Bootstrap Build595245
Node: Straight Build596991
Node: Pre-installation Checks598380
Node: Installation of Binaries601806
Node: Updating Documentation603167
Node: Missing bison?604021
Node: Missing makeinfo?605367
Node: Distributing Binaries605892
Node: Debugging and Interfacing611830
Node: Main Program Unit614514
Node: Procedures617011
Node: Functions619672
Node: Names621290
Node: Common Blocks624431
Node: Local Equivalence Areas626464
Node: Complex Variables629151
Node: Arrays630481
Node: Adjustable Arrays633815
Node: Alternate Entry Points636674
Node: Alternate Returns643376
Node: Assigned Statement Labels644277
Node: Run-time Library Errors646122
Node: Collected Fortran Wisdom648074
Node: Advantages Over f2c649510
Node: Language Extensions650419
Node: Compiler Options650926
Node: Compiler Speed651378
Node: Program Speed652088
Node: Ease of Debugging653673
Node: Character and Hollerith Constants656103
Node: Block Data and Libraries656897
Node: Loops660221
Node: Working Programs665437
Node: Not My Type666117
Node: Variables Assumed To Be Zero668048
Node: Variables Assumed To Be Saved669102
Node: Unwanted Variables670472
Node: Unused Arguments671352
Node: Surprising Interpretations of Code671815
Node: Aliasing Assumed To Work672661
Node: Output Assumed To Flush678577
Node: Large File Unit Numbers679983
Node: Overly Convenient Options681265
Node: Faster Programs684875
Node: Aligned Data685321
Node: Prefer Automatic Uninitialized Variables689165
Node: Avoid f2c Compatibility690531
Node: Use Submodel Options690999
Node: Trouble691822
Node: But-bugs693431
Node: Signal 11 and Friends695205
Node: Cannot Link Fortran Programs697284
Node: Large Common Blocks698567
Node: Debugger Problems698993
Node: NeXTStep Problems699515
Node: Stack Overflow701337
Node: Nothing Happens703350
Node: Strange Behavior at Run Time704964
Node: Floating-point Errors707257
Node: Actual Bugs711834
Node: Missing Features720231
Node: Better Source Model721948
Node: Fortran 90 Support723717
Node: Intrinsics in PARAMETER Statements724818
Node: SELECT CASE on CHARACTER Type725704
Node: RECURSIVE Keyword726002
Node: Increasing Precision/Range726429
Node: Popular Non-standard Types727966
Node: Full Support for Compiler Types728383
Node: Array Bounds Expressions729055
Node: POINTER Statements729502
Node: Sensible Non-standard Constructs730385
Node: FLUSH Statement732710
Node: Expressions in FORMAT Statements733096
Node: Explicit Assembler Code734271
Node: Q Edit Descriptor734560
Node: Old-style PARAMETER Statements735064
Node: TYPE and ACCEPT I/O Statements735798
Node: STRUCTURE UNION RECORD MAP736364
Node: OPEN CLOSE and INQUIRE Keywords736850
Node: ENCODE and DECODE737282
Node: Suppressing Space Padding738383
Node: Fortran Preprocessor739609
Node: Bit Operations on Floating-point Data740182
Node: POSIX Standard740696
Node: Floating-point Exception Handling740940
Node: Nonportable Conversions741982
Node: Large Automatic Arrays742518
Node: Support for Threads742925
Node: Gracefully Handle Sensible Bad Code743350
Node: Non-standard Conversions744105
Node: Non-standard Intrinsics744448
Node: Modifying DO Variable744864
Node: Better Pedantic Compilation745540
Node: Warn About Implicit Conversions746168
Node: Invalid Use of Hollerith Constant746755
Node: Dummy Array Without Dimensioning Dummy747298
Node: Invalid FORMAT Specifiers748211
Node: Ambiguous Dialects748612
Node: Unused Labels749023
Node: Informational Messages749245
Node: Uninitialized Variables at Run Time749648
Node: Bounds Checking at Run Time750255
Node: Labels Visible to Debugger750703
Node: Disappointments751109
Node: Mangling of Names751747
Node: Multiple Definitions of External Names752597
Node: Limitation on Implicit Declarations753960
Node: Non-bugs754244
Node: Backslash in Constants755369
Node: Initializing Before Specifying760258
Node: Context-Sensitive Intrinsicness761400
Node: Context-Sensitive Constants763296
Node: Equivalence Versus Equality766253
Node: Order of Side Effects768763
Node: Warnings and Errors770491
Node: Open Questions772175
Node: Bugs773323
Node: Bug Criteria774828
Node: Bug Lists781063
Node: Bug Reporting781828
Node: Sending Patches795275
Node: Service800752
Node: Adding Options801213
Node: Projects805262
Node: Efficiency806107
Node: Better Optimization809004
Node: Simplify Porting812374
Node: More Extensions814129
Node: Machine Model817330
Node: Internals Documentation818616
Node: Internals Improvements818930
Node: Better Diagnostics822474
Node: Diagnostics823391
Node: CMPAMBIG824685
Node: EXPIMP831152
Node: INTGLOB832388
Node: LEX834632
Node: GLOBALS840024
Node: Index841877

End Tag Table
