	ProLiant BL e-Class GbE Interconnect Switch Firmware		
		Customer-Level Release Notes
			Version 2.1.6
			  6/17/2005

A. Description -

	This version of ProLiant BL e-Class GbE2 Interconnect Switch Firmware
	contains changes made to the previous firmware version.

B. Upgrade Requirement -

	Not-Critical

C. New Features -
	
	None.

D. Problems Fixed -

	1) No NTP poll after switch boot: add polling STP state. SNTP packet
	will not be sent until one port's STP state changes to "forwarding".

	2) "cfg show" from telnet times out after pressing q, Esc, or CTRL-C.

	3) "cfg show" and TFTP operations no longer conflict.  TFTP 
	operations will not be available until "cfg show" completes.

	4) Changes to port X in a VLAN changes the PVID of port Y in the
	same VLAN.

	5) e-Class GbE switches could not disable crossconnect ports 
	(21 & 22) in version 2.1.2.

----------------------------------------------------------------------------

Usage information can be obtained from the following documentation:

	HP ProLiant BL e-Class GbE Interconnect Switch User Guide

	HP ProLiant BL e-Class GbE Interconnect Switch Menu-driven Interface
        	Reference Guide

	HP ProLiant BL e-Class GbE Interconnect Switch Command Line
        	Interface Reference Guide

	HP ProLiant BL e-Class GbE Interconnect Switch Web-based Interface
        	Reference Guide 

This documentation is downloadable from http://www.hp.com/support

----------------------------------------------------------------------------

Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information in this document is provided 
"as is" without warranty of any kind and is subject to change without notice.
The warranties for HP products are set forth in the express limited warranty 
statements accompanying such products. Nothing herein should be construed as 
constituting an additional warranty.

(c) 2002-2005 Hewlett-Packard Development Company, L.P.
