---------------------------------------------------------------------------
  ProLiant BL p-Class GbE2 Interconnect Switch Firmware, Version 1.1.4
---------------------------------------------------------------------------

Usage information can be obtained from the following documentation:

    HP ProLiant BL p-Class GbE2 Interconnect Switch User Guide
    HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide
    HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
    HP ProLiant BL p-Class GbE2 Interconnect Switch Browser-based Interface
	Reference Guide 

This documentation is downloadable from www.hp.com/support


------------------------------------------------------------------------
Caution:  Do not use the Browser-based Interface (BBI) to upgrade version 
	1.0.0 or 1.0.1 Firmware, since it may cause the switch to panic.
	Use the CLI, serial interface, or the Upgrade Tool.  The BBI may
	be used to upgrade version 1.1.0 and later firmware.

------------------------------------------------------------------------
Fixed Issues:
------------------------------------------------------------------------

/stats/mp/cpu always displays 100% cpu utilization for the last 1, 4, 
and 64 second intervals.

Cisco Discovery Protocol (CDP) traffic may be transmitted across a VLAN
boundary when it is untagged and sent across the XCONNECT ports (17 & 18). 

----------------------------------------------------------------------------

Hewlett-Packard Company shall not be liable for technical or editorial errors
or omissions contained herein. The information in this document is provided 
"as is" without warranty of any kind and is subject to change without notice.
The warranties for HP products are set forth in the express limited warranty 
statements accompanying such products. Nothing herein should be construed as 
constituting an additional warranty.


(c) 2002-2004 Hewlett-Packard Development Company, L.P.