Softpaq Solution:  SP10776
File Name:  SP10776.tar
Title:  Compaq Redhat 6.1 Diskettes
Version:  6.1
Language:  English

CATEGORY: Drivers 

DIVISIONS: Systems

EFFECTIVE DATE:  1 January, 2000

PRODUCTS AFFECTED: Compaq ProLiant Servers

OPERATING SYSTEM:
        Redhat 6.1

SYSTEM CONFIGURATION:
	Compaq ProLiant Servers

SUPERSEDES:  NA

IMPORTANT: DO NOT TURN OFF POWER TO THE SYSTEM WHILE PERFORMING THIS
           PROCEDURE!

TO CREATE Three (3) Compaq Redhat 6.1 DISKETTES: 

        1. After downloading the SoftPaq, copy it to an empty directory and
           change to that directory.
 
        2. From that drive and directory, untar the softpaq file:
                  tar xvf SP10776.tar

           The following files should be created:
           cpq-rh-install.img
           cpq-kfloppy-smp.img
           cpq-kfloppy-up.img
           Readme.txt

        3. Obtain three (3) 1.44 MB diskettes

        4. Insert a diskette into the disk drive.  Use dd to put these
	   images onto three seperate diskettes.
 	     dd if=cpq-rh-install.img of=/dev/fd0 bs=18k 
 	     dd if=cpq-kfloppy-smp.img of=/dev/fd0 bs=18k 
 	     dd if=cpq-kfloppy-up.img of=/dev/fd0 bs=18k 
        
        5. At this point, the diskettes have been created and are ready to
        use. 

        6. Insert the Compaq Redhat Boot floppy.

        7. When the diskette boots up, you will be prompted for input.
            Press <F6> for instructions on installing with these
            Compaq Redhat 6.1 Diskettes.
            
        Copyright 1989,2000, Compaq Computer Corporation.
        All rights reserved.

        Product names mentioned herein may be trademarks and/or registered
        trademarks of their respective companies.
