TITLE: ProLiant MIB update kit for HP Systems Insight Manager for Windows, Linux, and HP-UX
VERSION: 7.70
FILENAME: upd770mib.zip (Windows); upd770mib.tar (Linux, HP-UX)

NOTE: The MIBS contained in this Mib Update Kit are an integral part of HP Systems Insight Manager 5.1 release.
      If this Mib Update Kit is applied to HP Systems Insight Manager 5.1, no warn will be done.

_____________________________________
ENHANCEMENTS

The following MIBs were changed in this release:


NOTE: The following mibs are part of the CGESM 12.2(25)SEE1 mibs included on this kit.
The detailed changes are not listed as there are virtually hundreds

    cisco-cdp.mib
    cisco-cluster.mib
    cisco-config-copy.mib
    cisco-entity-fru.mib
    cisco-entity-vendortype-old.mib
    cisco-flash.mib
    cisco-ftp-client.mib
    cisco-igmp-filter.mib
    cisco-lag.mib
    cisco-mac-notification.mib
    cisco-memory-pool.mib
    cisco-nac-nad.mib
    cisco-pae.mib
    cisco-pagp.mib
    cisco-products.mib
    cisco-qos-pib.mib
    cisco-rttmon.mib
    cisco-stp-extensions.mib
    cisco-syslog.mib
    cisco-tc.mib
    cisco-udldp.mib
    cisco-vlan-membership.mib
    cisco-vtp.mib
    entity.mib
    etherlike.mib
    if-mib.mib
    inet-address.mib
    old-cisco-chassis.mib
    p-bridge-mib.mib
    rmon-mib.mib
    rmon2-mib.mib
    snmp-framework-mib.mib
    snmp-mpd-mib.mib
    snmp-notification-mib.mib
    snmp-target-mib.mib
    snmpv2-mib.mib
    tcp-mib.mib
    udp-mib.mib

    Updated the following mibs for GbE2 3.1.0
       - bladetype2-acl.mib
       - bladetype2-network.mib
       - bladetype2-qos.mib
       - bladetype2-physical.mib
       - bladetype2-switch.mib
       - bladetype2-trap.mib

    cpqfca.mib - MIB Rev of 1.26
        - Add new HBAs to cpqFcaHostCntlrModel.

    cpqnic.mib
        - changed the order of an OBJECT-TYPE

    cpqservice.mib
        - changes to some text 

    cpqhost.mib - MIB Rev 1.26 is for release 7.70
       - Added "none" value in cpqHoCrashDumpState enumeration
       - Changed the enumeration of cpqHoCrashDumpCondition OID
       - cpqHoCrashDumpCondition - updated condition for "other" value
       - cpqHoCrashDumpMonitoring - added OID
       - cpqHoCrashDumpNotEnabledTrap - changed description
       - cpqHoBootPagingFileTooSmallTrap - changed description

    cpqida.mib - MIB Rev of 1.34 is for 7.70
       - Add failed battery list for Smart Array P800.
       - Added support for Smart Array E500.

    Cpqnic.mib
       - Added cpqNicIfPhysAdapterIoBayNo
       - Added a new value (redundancySet(11)) to cpqNicIfLogMapGroupType 
       - Fixed the cpqNicVirusThrottle group definition

    cpqscsi.mib - MIB Rev of 1.36
        - Updated the SAS tape trap.
        - Added statsNotSupported(8) to cpqScsiPhyDrvStatsPreserved.

    cpqsinfo.mib - MIB Rev of 1.27 is for 7.70
       - cpqSiMemModuleCellStatus - description changed

    cpqsm2.mib - 
       - Added cpqSm2ServerFatalError trap for Net Integrity Blades

    cpqstdeq.mib
       - cpqSePcieSlotMaxLinkSpeed OID - added
       - cpqSePcieSlotMaxLinkWidth OID - added
       - cpqSePcieFunctNegotiatedLinkSpeed OID - added
       - cpqSePcieFunctNegotiatedLinkWidth OID - added
       - cpqSePcieFunctMaxLinkSpeed OID - added
       - cpqSePcieFunctMaxLinkWidth OID - added
       - cpqSePartitionCoreCell OID - description changed
       - cpqSePartitionCoreCellCabinet OID - description changed
       - cpqSePciSlotBusNumberIndex OID - description changed 
       - cpqSePcieSlotMaxLinkSpeed OID - added
       - cpqSePcieSlotMaxLinkWidth OID - added
       - cpqSePcieFunctNegotiatedLinkSpeed OID - added
       - cpqSePcieFunctNegotiatedLinkWidth OID - added
       - cpqSePcieFunctMaxLinkSpeed OID - added
       - cpqSePcieFunctMaxLinkWidth OID - added
       - cpqSePartitionCoreCell OID - description changed
       - cpqSePartitionCoreCellCabinet OID - description changed
       - cpqSePciSlotBusNumberIndex OID - description changed
       - added varbind cpqHoTrapFlags to cpqSeUSBStorageDeviceAttached
         and cpqSeUSBStorageDeviceRemoved
       - cpqSeCpuCacheCpuCoreIndex OID - description changed
       - cpqSeCpuCacheCpuCoreIndex description was changed back to original

    cpqstsys.mib MIB Rev of 1.27
       - Add new status values to cpqSsBackplaneFanStatus and
         cpqSsBackplaneFtpsStatus.
       - Added a second fan bay to cpqSsFanModuleLocation.

    cpqwcrm.mib - New mib added with no rev number documented in mib












_____________________________________
INSTALL INFORMATION 

This document will guide the user through getting the latest mib and cfg files copied and installed on their management server.

Two procedures exist: one to install the MIB update on Windows platforms and the other to install the MIB update on HP-UX or Linux platforms.

The Windows update will automatically determine if HP Systems Insight Manager is running and then perform the appropriate steps else an error will be summed.

The procedure for HP-UX and Linux is the same for both Operating Systems and only runs if Systems Insight Manager (any version) is installed.

    NOTE: The user must log in with administrator privileges on Windows and as root on HP-UX/Linux. In addition, when updating the MIBs
    for Systems Insight Manager, the log in account must also be a full-rights Systems Insight Manager user in order to execute tools such as MxMib.

    NOTE: This kit contains modifications to event types which if used in a query could cause the query to not trigger as the query
    mechanism uses a perfect match scheme.

_____________________________________
INSTALL PROCEDURE(s)

To Update MIBs on a Windows Platform:

1)  Log in to Windows as a user with administrative rights
2)  Create a temp directory, such as c:\mgmtcd
3)  Launch your browser with this URL: http://www.hp.com/go/hpsim and navigate to the mibs download.
    Select Download->HP SIM - Windows->Insight Management MIB update kit for HP SIM.
4)  Download and save the zip file, upd770mib.zip, to the newly created directory, c:\mgmtcd
5)  Open My Computer and navigate to c:\mgmtcd.
6)  Using a Win-zip compatible program, unzip the contents of the zip file by double clicking on it 
    and then extract the contents to c:\mgmtcd.
7)  Start a command console by clicking on Start->Run and entering cmd in the dialog box that appears and then click OK.
8)  In the Command Console, navigate to c:\mgmtcd ( cd c:\mgmtcd )
7)  In c:\mgmtcd, execute the following command exactly:
    cscript updatemibs.js
8)  The script will run and display messages on the command console.
9)  When the script completes, you may delete the temp directory c:\mgmtcd and all its contents


To Update MIBs on an HP-UX/Linux Platform:

1)  Log in to HP-UX/Linux as root
2)  Create a directory such as /root/mgmtcd ( mkdir mgmtcd), It does not have to exist off of the root but for the purposes of this document it does)
3)  Launch your browser with this URL:  http://www.hp.com/go/hpsim and navigate to the mibs download.
    Select Download->HP SIM - (HP-UX or Linux)->Proliant MIB update kit for HP SIM.
4)  Download and save the tar file, upd770mib.tar to the newly created directory, /root/mgmtcd
5)  Start a terminal and navigate to the new directory ( cd /root/mgmtcd )
6)  Extract the contents of upd770mib.tar by entering the following command:
    tar -xvf upd770mib.tar
7)  Execute the following:
    chmod +x updatemibs
8)  Execute the following:
    ./updatemibs
9)  The script will run and display messages on the terminal.
10)  When the script completes, you may remove the directory /root/mgmtcd and all its contents


Copyright 2004, 2005, 2006, Hewlett-Packard Development Company, L.P.  All rights reserved.

