TITLE: ProLiant MIB update kit for HP Systems Insight Manager for Windows, Linux, and HP-UX
VERSION: 7.60
FILENAME: upd760mib.zip (Windows); upd760mib.tar (Linux, HP-UX)

NOTE: The MIBS contained in this Mib Update Kit are an integral part of HP Systems Insight Manager 5.1 release.
      If this Mib Update Kit is applied to HP Systems Insight Manager 5.1, no warning will be done.

_____________________________________
ENHANCEMENTS

The following MIBs were changed in this release:


- BT2NETWORK.MIB
  - Large number of changes. To numerous to highlight here

- bt4network.mib
  - New mib added to support a new switch

- bt4physical.mib
  - New mib added to support a new switch

- bt4switch.mib
  - New mib added to support a new switch

- bt4trap.mib
  - New mib added to support a new switch

- cpqfca.mib - MIB Rev of 1.25
  - Add new HBAs to cpqFcaHostCntlrModel.

- cpqhlth.mib 
  - Updated minor revision comment to keep compliant with the real minor 
    revision value 

- cpqhost.mib 
  - Updated minor revision comment to keep compliant with the real minor 
    revision value 
  - Changed description for cpqHoGUID
  - Added "virtualMachine" value in cpqHoHWInfoPlatform enumeration

- cpqida.mib MIB Rev of 1.33
  - Changes for Smart Array P800 and SAS tape.

- cpqscsi.mib - MIB Rev of 1.35
  - Added hpSc11Xe(19) to cpqScsiCntlrModel list of enumerations.
  - Added sasSc44Ge(5) to cpqSasHbaModel list of enumerations.
  - Added SAS tape support.

- cpqsinfo.mib 
  - Updated minor revision comment to keep compliant with the real minor 
    revision value 
  - Added cpqSiFirmwareLocation OID 
  - Added cpqSiFirmwareStatus OID

- cpqstdeq.mib 
  - Updated minor revision comment to keep compliant with the real minor 
    revision value 
  - cpqSeHPVMFwVer OID - added 
  - cpqSeUSBStorageDeviceAttached TRAP - added
  - cpqSeUSBStorageDeviceRemoved TRAP - added


- cpqrack.mib
  - MIB Rev of 1.4 changes are to support BladeSystem c-class project.
    In c-class, cpqRackNetConnectorTable is used to represent
    all Interrconnect types.
  - Added cpqRackCommonEnclosureHasManagers, 
       cpqRackCommonEnclosureManagerTable,
       cpqRackCommonEnclosureManagerEntry,
       cpqRackCommonEnclosureManagerRack,
       cpqRackCommonEnclosureManagerChassis,
       cpqRackCommonEnclosureManagerIndex,
       cpqRackCommonEnclosureManagerEnclosureName,
       cpqRackCommonEnclosureManagerLocation,
       cpqRackCommonEnclosureManagerPartNumber,
       cpqRackCommonEnclosureManagerSparePartNumber,
       cpqRackCommonEnclosureManagerSerialNum,
       cpqRackCommonEnclosureManagerRole,
       cpqRackCommonEnclosureManagerPresent,
       cpqRackCommonEnclosureManagerRedundant,
       cpqRackCommonEnclosureManagerCondition,
       cpqRackCommonEnclosureManagerEnclosureSerialNum,
       cpqRackNetConnectorDeviceType
  - Added TRAPS cpqRackEnclosureManagerDegraded,
       cpqRackEnclosureManagerOk,
       cpqRackEnclosureManagerRemoved,
       cpqRackEnclosureManagerInserted,
       cpqRackManagerPrimaryRole,
       cpqRackServerBladeEKeyingFailed,
       cpqRackServerBladeEKeyingOk,
       cpqRackNetConnectorInserted,
       cpqRackNetConnectorRemoved,
       cpqRackNetConnectorFailed,
       cpqRackNetConnectorDegraded,
       cpqRackNetConnectorOk

- hpswitchpl.mib
  - new definitions to support the four new switches above

_____________________________________
INSTALL INFORMATION 

This document will guide the user through getting the latest mib and cfg files copied and installed on their management server.

Two procedures exist: one to install the MIB update on Windows platforms and the other to install the MIB update on HP-UX or Linux platforms.

The Windows update will automatically determine if HP Systems Insight Manager is running and then perform the appropriate steps else an error will be summed.

The procedure for HP-UX and Linux is the same for both Operating Systems and only runs if Systems Insight Manager (any version) is installed.

    NOTE: The user must log in with administrator privileges on Windows and as root on HP-UX/Linux. In addition, when updating the MIBs
    for Systems Insight Manager, the log in account must also be a full-rights Systems Insight Manager user in order to execute tools such as MxMib.

    NOTE: This kit contains modifications to event types which if used in a query could cause the query to not trigger as the query
    mechanism uses a perfect match scheme.

_____________________________________
INSTALL PROCEDURE(s)

To Update MIBs on a Windows Platform:

1)  Log in to Windows as a user with administrative rights
2)  Create a temp directory, such as c:\mgmtcd
3)  Launch your browser with this URL: http://www.hp.com/go/hpsim and navigate to the mibs download (if you do not have
    the zip file yet).  Select Download->HP SIM - Windows->Insight Management MIB update kit for HP SIM.
4)  Download and save the zip file, upd760mib.zip, to the newly created directory, c:\mgmtcd
5)  Open My Computer and navigate to c:\mgmtcd.
6)  Using a Win-zip compatible program, unzip the contents of the zip file by double clicking on it 
    and then extract the contents to c:\mgmtcd.
7)  Start a command console by clicking on Start->Run and entering cmd in the dialog box that appears and then click OK.
8)  In the Command Console, navigate to c:\mgmtcd ( cd c:\mgmtcd )
7)  In c:\mgmtcd, execute the following command exactly:
    cscript updatemibs.js
8)  The script will run and display messages on the command console.
9)  When the script completes, you may delete the temp directory c:\mgmtcd and all its contents


To Update MIBs on an HP-UX/Linux Platform:

1)  Log in to HP-UX/Linux as root
2)  Create a directory such as /root/mgmtcd ( mkdir mgmtcd), It does not have to exist off of the root but for the purposes of this document it does)
3)  Launch your browser with this URL:  http://www.hp.com/go/hpsim and navigate to the mibs download.
    Select Download->HP SIM - (HP-UX or Linux)->Proliant MIB update kit for HP SIM.
4)  Download and save the tar file, upd760mib.tar to the newly created directory, /root/mgmtcd
5)  Start a terminal and navigate to the new directory ( cd /root/mgmtcd )
6)  Extract the contents of upd760mib.tar by entering the following command:
    tar -xvf upd760mib.tar
7)  Execute the following:
    chmod +x updatemibs
8)  Execute the following:
    ./updatemibs
9)  The script will run and display messages on the terminal.
10)  When the script completes, you may remove the directory /root/mgmtcd and all its contents


Copyright 2004, 2005, 2006, Hewlett-Packard Development Company, L.P.  All rights reserved.

