Final Release of Patch V86S-7

Applicable to V86S-1 Code Build Stream and V86S-4 Card image.
Pre-requisite patches  V86S-2, -3 -4 -5 and -6  must be installed prior
to this patch.

*************** COMPAQ COMPUTER CORPORATION  DISCLAIMER **************
* In accordance to Compaq's commitment to maintain the highest level  *
* of customer satisfaction, this patch is being provided to customers *
* who have purchased the referenced Storageworks product that is      *
* currently covered by one of Compaq's  extensive warranty plans and  *
* is also provided to those customers not yet underCompaq's extended  *
* warranty plan as a courtesy.  The availability of this patch is in  *
* no way an obligation by Compaq to continue this practice in the     *
* future.                                                             *
***********************************************************************

****************************** WARNING ********************************
*                                                                     *
* - Please be sure to cut and paste EXACTLY as indicated.  Any        *
*   addition or subtraction of pertinent patch data will mean the     *
*   patch will not load due to a checksum failure and the controller  *
*   will remain at it's original version.                             *
*                                                                     *
* - As always, any critical data should be backed up prior to         * 
*   performing any updates.                                           *
***********************************************************************

				PATCH V86S-7

Patch Title:    No Save Config 
ACS Version:    HSG80 V86  / HSG60 V86
Patch Number:   7
Date:           8-March-2002

I.     Patch Description:

   Problem Symptoms:  
     1. The Save_configuration option must be turned off.
     2. Patch 86-3 causes crash on partition JBOD w/Save_config 
      
   Resolution: 
     1. Disabling the writing of Save_configuration at this time. 
        Subsequent patch will re-install the option.
     2. Not resetting (save_cfg bit on device).
 

Title:	No saveconfig 

Version:	V86S
Length: 	33
Patch Type:	0
Patch Number:	7 

 Count:  	1
 Address:	C00A82C8
 Value[  0]:	8C800000

 Count:  	1
 Address:	C0FFF3C0
 Value[  0]:	5CA01614

 Count:  	0

Verification:	D780BC72




II.    Patch Installation Script for use with a host to CLI Utility 


Extract the following script to file PATCH_V86S-7.script. 
Submit script to CCL via Command Scripter utility.

----- Begin Script -----
!
!No saveconfig
!
run clcp
2
1
y
V86S
33
0
7
1
C00A82C8
8C800000
1
C0FFF3C0
5CA01614
0
D780BC72
3
0
----- End Script -----




III.   Patch file for use with SWCC Client's Update Software feature. 

Extract the following to filename PATCH_V86S-7_INSTALL.WB_DATA and 
transfer to the Client host.  Specify it in the 'File to load' box 
from the SWCC Update Controller Software screen as selected via the 
'Storage' menu option.


----- Begin SWCC Script -----
! No saveconfig install (c) COMPAQ 6-Mar-2002 !
1
V86S
33
0
7
1
C00A82C8
8C800000
1
C0FFF3C0
5CA01614
0
D780BC72
----- End SWCC Script -----


IV.   Patch Deletion Script for use with SWCC Client'S Update feature. 

Extract the following to filename to PATCH_V86S-7_DELETE.WB_DATA and 
transfer to the Client host.  Specify it in the 'File to load' box from
the SWCC Update Controller Software screen as selected via the
'Storage' menu option.

----- Begin Script -----
! nO SAVECONFIG-delete (c) COMPAQ 6-Mar-2002 !
2
V86S
7
----- End Script -----

