PCMATA.SYS v1.01

This new ATA driver is a direct replacement for the PCMATA.SYS 
v1.00 contained in Toshiba Card Manager v3.0.  It supports the 
following enhancements:

1. Allows partitions of greater the 128MB.
2. Allows different IO port settings to be used for the ATA drives.
   The /IO=xxx parameter will now accept an available IO port 
   other than 170h.
3. For the T2400C Series and the T2450CT, add "/IO=170" to the end
   of the PCMATA line in C:\PCMPLUS3\PCM.INI.

TO USE THIS NEW DRIVER

Since this is a direct replacement, all that is necessary is to 
rename your old driver and copy this new driver into your 
PCMPLUS3 directory.  The following steps assume your PCMPLUS3 
files are located in the C:\PCMPLUS3 directory and that the new 
driver is on a diskette.

1. type CD \PCMPLUS3 and press enter
2. type REN PCMATA.SYS PCMATA.OLD and press enter
3. insert the diskette containing the new driver into drive A.
4. type COPY A:PCMATA.SYS and press enter
5. restart your computer by pressing ctrl+alt+del to load the 
   new PCMATA.SYS driver

### end of PCMATA.TXT 1/30/95
