
	Installation des CD512E unter WINDOWS 95 und DOS
	
	Installation of CD512E under WINDOWS 95 and DOS (see below)


0.	Zur Installation unter Dos, bzw. zur automatischen Installation 
	des CD512E unter WINDOWS95 stellen Sie bitte sicher, da die Datei 
	MSCDEX.EXE sich im Verzeichnis C:\DOS befindet.
	Zum Installieren starten Sie die Datei A:\INSTALL.EXE


1.	Zur manuellen Installation des CD512E gehen Sie bitte wie folgt vor:

	Fgen Sie in der CONFIG.SYS folgenden Eintrag ein:
	
	DEVICE=C:\TEAC\TEAC_CDI.SYS /D:CDI /P:S-M
	
	Wobei \TEAC das Verzeichnis ist, in den sich die Treiber
	des CD512E befinden, und das Laufwerk als MASTER am SEKUNDREN 
	Port angeschlossen ist. Diesen Eintrag mssen Sie entsprechend
	Ihrer Konfiguration ndern, wobei die Abkrzungen folgende 
	Bedeutungen haben:
	/P: (P)rimr, (S)ekundr,(T)ertir,(Q)uartir - (M)aster,(S)lave

	In der Datei C:\WINDOWS\DOSSTART.BAT, bzw. in der Datei C:\AUTOEXEC.BAT
	mu dann der High Level	Treiber nachgeladen werden, dazu mssen Sie
	folgenden Eintrag in diese Dateien einfgen:

	C:\WINDOWS\COMMAND\MSCDEX.EXE /D:CDI /M:18

2.	Starten Sie nun WINDOWS95 und fhren Sie eine automatische Hardware-
	erkennung durch.
	Nach dem Neustart von WINDOWS95 steht Ihnen das Laufwerk als 32-BIT
	Gert zur Verfgung.

3.	Falls Sie das Gert in der ursprnglichen DOS Umgebung nutzen wollen
	mssen Sie entprechend die Dateien AUTOEXEC.DOS und CONFIG.DOS
	editieren.

4.	Zum Installieren des TEAC AUDIO PLAYERS starten Sie im Verzeichnis 
	A:\WINDOWS das Programm SETUP.EXE

-----------------------------------------------------------------------------


0.	For DOS installation or automatic installation under WINDWS95 
	make sure, that the MSCDEX.EXE is located in the directory C:\DOS.
	Start now the programm A:\INSTALL.EXE.

1.	If you want to set up the drive manually, please modify the mentioned 
	files as listed below:
	
	CONFIG.SYS:
	DEVICE=C:\TEAC\TEAC_CDI.SYS /D:CDI /P:S-M

	here \TEAC is the directory which contains the driver files for the
	CD512E and the drive is connected to the secondary port as MASTER.
	please change this settings to your configuration.
	/P:(P)rimary,(S)econdary,(T)ertiary,(Q)uartiary - (M)aster,(S)lave

	In the file C:\WINDOWS\DOSSTART.BAT, and/or C:\AUTOEXEC.BAT you
	have to add the following line:

	C:\WINDOWS\COMMAND\MSCDEX.EXE /D:CDI /M:18

2.	Start WINDOWS95 and run the hardware detection, after rebooting your
	system the CD512E will apear as a 32-BIT device.

3.	If you want to use the CD512E in your old DOS enviroment you have to
	edit the files AUTOEXEC.DOS and CONFIG.DOS as mentioned above.

4.	For installing the TEAC AUDIO PLAYER run the SETUP.EXE programm in
	the directory A:\WINDOWS

	HOTLINE:
		Tel. 0611 715854
		Fax  0611 715866

		BBS  0611 715866		