
                                                                Jan. 1996
      Pocket Lan Ethernet Card Setup/Diagnostic program
      ==================================================

The SETUP.EXE program (Setup/Diagnostic) lets you configure the PE-EPP
hardware settings, and test the state and cable connection of the card.

To run the program, insert the PE-EPP driver program diskette in drive 'A' and
do the following:

        > cd \UTILITY        --change directory to UTILITY
        > SETUP              --run the SETUP.EXE program

        or

        > cd \UTILITY        --change directory to UTILITY
        > SETUP /F           --run the SETUP.EXE with parameter /F
                               if the data in your EEPROM has been corrupted
                               or you cannot configure your card through normal
                               Please run "SETUP /F".


Menu Options
============

1.  SETUP lets you configure the hardware settings of PE-EPP.
    You have the option to view/change :

                 Node ID
                 Printer Port's Base Address
                 Printer Port's IRQ
                 Adapter Model
                 Connector
                 Printer Port's Mode
                 RAM Size
                 Printer Port Writes to Adapter
                 Printer Port Reads from Adapter
                 Runtime Configuration by


2.  DIAGNOSTIC lets you diagnose the state and cable connections of PE-EPP.

