@LANGUAGE Deutsch
@LANGUAGE English
miro Computer Products                                Stand: 28.10.1993
@+Deutsch
                        Aktuelle Informationen
                    ==============================


Duplizieren dieser Diskette:

       Diese Diskette sollte nur mit Hilfe des DOS-Programms
       DISKCOPY kopiert werden, da andere Kopierprogramme
       (z.B.: COPY oder XCOPY) Dateiflags lschen.

Hardwarekonflikte:

       Grundstzlich gilt: Der Betrieb einer 8514/A Graphikkarte
       zusammen mit einer ARCnet Netzwerkkarte kann zu Adre-
       konflikten fhren. Kontrollieren Sie vor der Installation
       der miroMAGIC Karte, ob die I/O Adresse der Netzwerkkarte
       2E0h ist. In diesem Fall mu sie in einen anderen freien
       Bereich, vorzugsweise zwischen 300h und 340h, verlagert
       werden.

       Es gibt auch andere Einsteckkarten, die den Bus-Reset
       unterdrcken. Dies uert sich in Phnomene wie "flaues Text-
       bild" oder eine MAGICplus wird als CRYSTAL 4.16 erkannt.
       Dann kann es ntig werden, der miroMAGIC ihre ansonsten
       automatisch ermittelte Konfiguration per Software mitzuteilen:
       Dazu mu in der Autoexec.bat die eingefgte Zeile
       MAGICINI -L
       um die Parameter -2MB fr MAGICplus oder MAGIC HR
              oder      -1MB fr MAGIC MR
              und       -DL  fr Einschirmbetrieb
              oder      -DS  fr Zweischirmbetrieb
       erweitert werden. Also zum Beispiel:
       C:\MAGIC\MAGICINI -L -2MB -DL fr eine MAGICplus im
       Einschirmbetrieb. Es kann allerdings vorkommen, da bis zu dieser
       Initialisierung der Text flau erscheint. Einsteckkarten, die diesen
       Effekt hervorrufen knnen:
       ADAPTEC 1542
       ULTRASTOR 24F
       einige IDE-Controller


Kompatibilitt:

       Abweichend zum Handbuch haben wir im Zusammenspiel der
       miroMAGIC mit einigen INTEL-386DX 25MHz Motherboards Pro-
       bleme gefunden. In einigen Motherboards luft die miroMAGIC
       nicht. Dieses Problem lie sich nicht auf eine Revision
       des Motherboards reduzieren, da es innerhalb einer Serie
       sowohl funktionierende als auch nicht taugliche Boards
       gibt.

Windows 3.X im Enhanced Mode:

       Diese Betriebsart luft in manchen Konfigurationen erst
       nach einfgen von EMMEXCLUDE=C400-C7FF in die Datei
       SYSTEM.INI unter [386enh]. In diesem Bereich haben
       erweiterte VGA-Karten zustzlichen Speicher, der vor
       Zugriffen durch den Windows-Memory-Manager geschtzt
       werden mu.

Windows 3.0 mit 640x480 Echtfarben-Auflsung:

       Windows 3.0 hat im Echtfarbenmodus einen Programmfehler. Dieser
       ist in der Datei GDI.EXE lokalisiert. Wir haben zur einfachen
       Behebung des Fehlers nach Hinweis von Microsoft ein Programm
       entwickelt: PATCHGDI.EXE.
       Aufruf: PATCHGDI \Windows-Systempfad
       z.B.: PATCHGDI c:\windows\system
       Patchgdi kopiert daraufhin die alte Datei GDI.EXE nach GDI.OLD
       und verndert die Datei GDI.EXE.
       Diese vernderte Datei ist auch fr alle anderen Betriebsarten
       einsatzfhig.

Bekannte Probleme mit Windows 3.X:

       Bei allen Auflsungen kann es zu Schwierigkeiten mit der DOS-
       Vollbild bzw. -Box Darstellung kommen (keine Eingabe ber Tastatur
       mglich oder nicht korrekte Farbpalette). Dies ist ein Fehler in
       Microsofts VGADIB.3GR und wird nicht durch uns behoben.
       Ein Betrieb der miroMAGIC mit einer Hercules-Monochromkarte oder
       eines Monochrom-Display-Adapters ohne zustzliche VGA ist in
       Verbindung mit Windows nicht mglich. Windows hat keinen Treiber
       fr den virtuellen Betrieb einer Monochromkarte.

AutoCAD mit DSMAGIC (miroGTI4)

       Bekannte Probleme:

       1. Wenn der Aufbau einer Zeichnung mit CTRL-C unterbrochen wird,
          knnen keine lokalen Befehle wie ZOOM, PAN etc. durchgefhrt
          werden. Durch Eingabe von REGEN oder erneutes Laden der Zeich-
          nung kann dieser Zustand beendet werden.

          Bei Verwendung des miroSPOTVIEW innerhalb von Befehlen, bei
          denen die AutoCAD-Funktion ZOOM gesperrt ist (z.B. DANSICHT,
          AutoCAD ZOOM D) kann es zu Fehlern in der Zeichnungsdarstel-
          lung kommen. Die Ausfhrung des Befehls REGEN lst diese
          Probleme.

       2. Fehler mit dem Tablet 'is/one' des Herstellers Kurta:

          Sollte das SPOTVIEW-Fenster springen, konfigurieren Sie bitte
          Ihr Tablett auf 'low-resolution'. Dies hat keinen Einflu auf
          die Auflsung ihrer miroMAGIC Grafikkarte.

       3. Wenn Sie Eingaben nicht mit 'RETURN' bzw. 'SPACE' abgeschlos-
          sen haben und das SPOTVIEW-Fenster abbauen, wird der Cursor
          nur in dem Bereich dargestellt, der durch den Rahmen des
          SPOTVIEW eingegrenzt wurde. Durch ZOOM ALLES kann der ursprng-
          liche Zustand wiederhergestellt werden.

       4. Wenn Sie das SPOTVIEW Feature benutzen, werden Gummiband-
          Cursor, die aus mehr als einem Element bestehen (z.B. Kreise
          oder Ellipsen), falsch bzw. mehrfach gezeichnet, wenn Sie das
          SPOTVIEW Fenster verschieben oder verlassen.

       5. Wenn Sie den Cursor in das lokale Pan und Zoomfeld am rechten
          Bildschirmrand oder den Bereich mit den Zoomfaktoren am oberen
          Bildschirmrand bewegt haben, werden Eingaben ber die Tastatur
          nicht bercksichtigt.

       6. Whrend eines Zeichenbefehls mit Texteingabe (z.B. Bem, Text,
          Dtext) ist die Verwendung der lokalen Zoom Dynamic Funktion
          nicht sinnvoll, da eventuell falsche Texte in die Zeichnung
          eingefgt werden. Mit dem Befehl Z kann dieser Vorgang rck-
          gngig gemacht werden.

       7. Die Bettigung von CTRL-C whrend der lokalen Funktion Zoom
          Dynamisch fhrt zu einer Zerstrung des Birdeyes. Mit einem
          Regen kann der normale Zustand wiederhergestellt werden.

       8. Die griechische Zeichensatzauswahl ist noch nicht untersttzt
          und kann nicht ausgewhlt werden. Der entsprechende Menpunkt
          mu mit nein beantwortet werden.

Monitoreinstellungen unter OS/2
        
        Bei bestimmten Konfigurationen kann es zum Hngenbleiben der
        DOS-Task kommen. Sollte dieser Fall auftreten, so sollte die
        Task geschlossen und die Diskette in ein Unterverzeichnis Ihrer 
        Festplatte kopiert werden. Von dort kann die Installation
        problemlos erfolgen.

Word Perfect 5.X und MAGICplus:

       Bei Word Perfect sollte fr den Grafikmodus der 8514/A-Treiber
       ausgewhlt werden. Fr den Textschirm empfehlen wir alternativ
       zu Standard VGA-Treiber den in Word Perfect enthaltenen
       "Paradise VGA Plus"-Treiber. Mit diesem Treiber ist es mglich,
       132x25 oder 132x43 Zeichen im Editiermodus zu nutzen. Von
       der MAGIC wird nur der jeweilige "color"-Modus untersttzt.

Generic CADD:

       Nachdem Generic CADD einmal verlassen wurde, ist ein Neustart
       des Rechners notwendig, um Generic CADD erneut starten zu knnen.

@+english
                        Current Information
                    ==============================

Back-up copy:

       To create a back-up copy of your installation disks as
       recommended in the User's Manual, make sure to use the
       DOS DISKCOPY command only. This preserves the read-only
       attributes of all files, which are needed by the INSTALL
       program in order to work correctly.

Hardware conflicts:

       In principle: Running an 8514/A graphics card together
       with an ARCnet network card can lead to address conflicts.
       Before you install your miroMAGIC card check whether
       the network card occupies the I/O address 2E0h. In this
       case you have to change said address to another, unoccupied
       one, preferably between 300h and 340h.

       We have found some plugIn-Boards, that suppress the RESET of
       the AT-Bus. The visible phenomena are a vga text with low
       brightness or a MAGICplus is detected as a CRYSTAL 4.16.
       In this case it is necessary to override the automatic
       configuration detection of the miro board by a software
       command. The AUTOEXEC.BAT contains after Installation of
       the miroMAGIC a line "C:\MAGIC\MAGICINI -L". Add to this line
       the parameters -2MB for MAGICplus or MAGIC HR
                  or  -1MB for MAGIC MR
                 and  -DL for single screen mode
                 or   -DS for dual screen mode
       Example: c:\MAGIC\MAGICINI -L -2MB -DL for a MAGICplus in
       single screen mode. It is possible, that up to this
       initialisation the text has low brightness.
       Some known boards, that could be source of this problem:
       ADAPTEC 1542
       ULTRASTOR 24F
       some IDE-Controllers

Compatibility:

       We have found some problems running the miroMAGIC with
       a few genuine INTEL 386-25 motherboards. These problems
       are not limited to one series of motherboards. It occurs
       with a few boards within a series.

Windows 3.X in Enhanced Mode:

       Running WIN 3.X with some SuperVGAs and miroMAGIC in enhanced
       386-Mode is sometimes only possible if the line
       EMMEXCLUDE = C400 - C7FF
       is included in the [386enh]-part of the file SYSTEM.INI.
       These VGAs have additional memory in this area, that has to
       be protected against access.

Windows 3.0 with 640x480 True Color resolution:

       Windows 3.0 has a program error in True Color Mode,
       located in the file GDI.EXE. After consulting with
       Microsoft we developed the program PATCHGDI.EXE to
       take care of this problem.
       Call: PATCHGDI \Windows system path
       For ex.: PATCHGDI c:\windows\system
       Now Patchgdi copies the old file GDI.EXE to GDI.OLD
       and changes the file GDI.EXE.
       You can also use this newly changed for all other 
       operating modes.

Known Bugs with Windows 3.x:

       DOS text attributes sometimes become corrupted when switching
       between and full screen DOS application. This is caused by an
       error in Microsoft's VGADIB.3GR grabber routines and will not
       be fixed by miro. Windows does not run if you have a monochrome
       adapter as a single primary adapter in conjunction with a
       miroMAGIC. Windows has no VDD for the monochrom adapter.


AutoCAD with DSMAGIC (miroGTI4)

       Known Problems:

       If the initial building up of a drawing has been interrupted
       by CTRL-C, the driver is not able to execute local Functions
       like zoom and pan. By entering the AutoCAD REGEN command or
       loading the drawing again you are able to end this status.

       Using the spotVIEW, while AutoCAD commands that don't allow
       a transparent zoom are active (like DVIEW or AutoCAD ZOOM D)
       results in a misalignment between the cursor and the displayed
       drawing.To fix this problem, execute the 'REGEN' command.

       Error when using the tablet labeled 'is/one' from Kurta:

       If you encounter some sort of jumping opening the spotview-
       window, you should reconfigure your tablett to 'low-resolution'
       mode. This has no influence to the resolution of your miroMAGIC.

       If you have not completed keyboard input with 'RETURN' or
       'SPACE' and close the SPOTVIEW-window, the cursor is not drawn
       over the whole screen. Executing the command ZOOM ALL will
       normalize the screen.

       When using the SPOTVIEW feature, rubberbands consisting of more
       than 1 element (eg. circles or ellipses) are drawn twice if you
       move the SPOTVIEW window while drawing the circle.

       If the cursor is in the local pan and zoom facilty on the right
       side of the screen or in the zoomfactor region at the top of
       the screen, no keyboard input is accepted.

       If you are drawing text with Autocad (eg. DIM, TEXT, DTEXT),
       executing the local ZOOM DYNAMIC of your MAGICGTI driver is
       not usefull. In some cases, wrong strings are drawn. You can
       fix this by executing the UNDO function build into AutoCAD.

       Using CTRL-C while using the local Zoom dynamic function can
       destroy the birdeye on a second monitor. To resume, execute
       the AutoCAD regen function.

       The greek characterset is not yet supported. This menupoint
       should be answered "no".

Monitorselection with OS/2

        At different configurations your DOS task may hang at the 
        monitor selection. In that case you can close this task and 
        copy the entire miro installation disk onto your harddisk 
        and try again.

Word Perfect 5.X:

       For the graphical preview function the 8514/A driver is
       recommended. For the textscreen we advise you to use the
       "Paradise VGA Plus" - driver instead of the standard VGA
       driver. It gives you the higher resolution of 132x25 or
       132x43 characters. For the MAGIC only the "color" mode
       is implemented.

Generic CADD:

       After quiting Generic CADD a system reboot is necessary to
       use it again.

