        #
        | README file for
        |
        | Subdirectory KONFIG
	|
        | Copyright (c) 1994-96 ELSA GmbH, Aachen (Germany)
        |
        |                                     Subsidary:
        | ELSA GmbH                           ELSA Inc.
        | Sonnenweg 11                        2041 Mission College Blvd.
        | D-52070 Aachen                      Suite 165
        | Germany                             Santa Clara, CA 95054
        |                                     USA
        |
	| Phone      : +49-241-9177-0         Phone: +1-408-565-9669
	| Support Fax: +49-241-9177-113       Phone:  1-800-272-ELSA
	| BBS (modem): +49-241-9177-981       Fax  : +1-408-565-9650
	| BBS (ISDN) : +49-241-9177-7800      BBS  : +1-408-565-9630
	| CIS        : GO ELSA                CIS  : GO ELSA
        | WWW        : http://www.elsa.de     WWW  : http://www.elsa.com
	|
	| 08/01/96, ap


        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Notes

------------------------------------------------------------------------

1.      Overview

        This directory contains all installation programs for a DOS-PC
        with IPX driver to do the ELSA MicroLink LANCOM configuration
        over a network.


------------------------------------------------------------------------

2.      Contents

        CONFINST.BAT   Installation batch for configuration program
        LIESMICH.TXT   This file (German)
        LCCONF.EXE     Self-extracting archive for configuration program
        README.TXT     This file


------------------------------------------------------------------------

3.      Installation

        The installation of the configuration program on a DOS-PC with
        IPX-driver can be done as follows:

        CONFINST drive path

        Drive  : [ A: / B: / C: / D: / ...]
        Path   : (any, but without concluding backslash)

        Example: CONFINST C: \LC_CONF

        Programstart:

        To start the configuration program do as follows.

        The DOS-PC must have an IPX-driver.

        Change to the subdirectory where the configuration program was
        installed.

        Start the IPX-based paket driver IPXPKT by typing: IPXPKT 0x60

        Start the configuration program by typing: LC_CONF

        After the program is started, fill up your choice list with
        LANCOM-names with corresponding MAC-addresses.
        Subsequently, the configuration by a selected name from the
        choice list is possible.


------------------------------------------------------------------------

4.      Notes
	
        By the configuration of LANCOM equipments, which can only be
        reached by IPX-router, keep in mind, that so-called IPX-
        propagated frames must be transfered.
        For the LANCOM-IPX router, this selection can be done by the
        menu

            /setup/ipx-modul/lan-einstellung/propagate


------------------------------------------------------------------------
