*************************************************************************
*                                                                       *
*       PCI-V192 Windows NT 3.50 Driver Release Notes                   *
*                                                                       *
*       Version:        1.01                                            *
*       Date:           June 29, 1995                                   *
*                                                                       *
*************************************************************************

Note:   The built in S3 compatible driver doesn't work on any Vision868
        board. If you'd like to install Windows NT on a PC with PCI-V192
        board, you MUST select others for display and insert this disk
        during the text setup phase. OTHERWISE, THE BUILT IN DRIVER WILL
        HANG UP YOUR SYSTEM.


DRIVER INSTALLATION PROCEDURE
=============================

1.      Log on the workstation as an administrator or with an account
        which has administrator privileges on the workstation.

2.      From the MAIN group in the Program Manager window, start the
        "Control Panel" program.

3.      Start the "Display" control panel applet program.

4.      If the driver has never been installed on the system, select
        the button labeled "Change Display Type...".  From the "Display
        Type" dialog box, select the "Change..." button.  From the
        "Select Device" dialog box, select the "Other..." button.

5.      At this point, specify the path to the new driver and press the
        <ENTER> key.

6.      From the "Select Device" dialog box, select the resolution you
        would like. Select the "Install" button. Windows NT Setup will
        copy the miniport driver and the display driver to the proper
        directories on your system.

7.      The "Windows NT Setup" program will display a dialog box asking
        you to enter the path where the actual files exist.  Enter the
        same path and press the <ENTER> key:

        Example:  A:\NT35

8.      If you are instead prompted with a question to use 'Current' or
        'New' drivers, select 'New', then enter the path.

9.      Reboot the system after exiting the "Windows NT Setup" program.

10.     After the system is rebooted, you will be able to go back into
        the Control Panel Display applet and select and test an alternate
        screen resolution.


KNOWN PROBLEMS IN THIS VERSION
==============================

1.      The color eraser of PaintBrush doesn't work in 16.7M colors modes.

