FLASH Memory Update Utility Release 3.2

This utility is used to save and update FLASH memory. It is recommended
that this utility be executed from a bootable MS-DOS diskette that 
contains BIOS recovery files for the target system (i.e. BIOS.REC).  

WARNING: This disk is NOT a DOS bootable diskette.

This utility must be executed in a system without memory managers installed.
If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update
is not safe.  Remove any memory manager or exit Windows before executing
the FLASH Memory Update Utility.



SHOWHDR.EXE:  This tool is provided to display header information on the
specified FLASH data image.  

Usage: SHOWHDR.EXE <FLASH data image filename>


Below is ALR Optima BIOS update procedures:
1. Bootup system with "Optima Flash BIOS programs' Diskette 
2. Select "Update flash memory from a file" and hit enter.
3. Select "Update system BIOS" and hit enter
4. Use Tab key to select file "1004BT0.BIO" CR 5. Select ' Continue with programming"
6. Remove diskette and reboot computer. 

Update System Logo:

1. repeat step 1 and 2 above.
2. Select "Update Logo data area"
3. use tab key to select "Logo1-c.usr" 
4. Select Continue with programming
5. Remove diskette and reboot computer. 

Note :
You must enter system BIOS setup and set BIOS to defaults after updating the BIOS.

