        
      This mode of operation uses ONLY the PAL Converter diskette         
      in the default disk drive (A or B).      

      - Due to space limitations of a 360kByte floppy, the conversion
        datafiles (.PAL, .JED, .PRT, .STD) are NOT saved.

      - For this reason, ONLY OPTION-1 of the PTP menu:
                   (PAL DEVICE  -->  PLD DEVICE)
        can be performed;  This mode requires communication with a Logic
        programmer via serial port connection.

      - Make sure the serial ports of the computer and Logic programmer are
        connected and properly configured; Check computer configuration with
        option-3 (COMMUNICATION PARAMETERS) in the PTP menu (next screen).
        
      - If saving the PAL conversion datafiles is required, then quit this 
        selection and restart from the MAIN MENU with either:

         * Option-4 which requires a separate floppy for the datafiles.

         * Option-6 which installs the PAL Converter on a Hard-disk system.


