I. Main features: 

1) 8x Digital ZOOM 

2) 45 Degree PAN (depends on camera) 

3) 45 Degree TILT (depends on camera) 

4) Control from your keyboard (keypad) (move left/right/up/down, zoom +/-) 

5) Works with all webcam applications. 

6) Allows to run multiple webcam applications with only one webcam device (CamSplitter integrated) 

7) Pan-Tilt-Zoom settings can be indication on the picture 

8) Simple setup 

9) FREE Trial download 



II. How it works?

USB based webcams usually support different resolutions for video, and quite often the maximum resolution is 640x480 (VGA). But that high of a resolution is not used in most cases. Typically, most people do not use more than a resolution of 320x200 for online video conferencing purposes because 640x480 is too big for real-time video over the internet. This allows CamZoomer to actually zoom and move the picture displayed on your camera. 



CamZoomer is an add-on application that fits in between your webcam application(s) and a real webcam driver. It takes video from a real webcam (in the maximum allowed resolution) and transfers it to the webcam application. This allows CamZoomer to do 2x ZOOM without any loss of quality. Using digital zoom allows CamZoomer to zoom in even further, up to 8x magnification, with still exceptionally high quality. This virtual zooming technique looks just like the real thing. The same resolution-changing technique allows extremely effective emulation of panning and tilting of your camera. Try CamZoomer and see how effective it is. Download the FREE trial, limited only by a small notification message reminding you to register. 



III. Installation:

1) Download and run CamZoomer.exe from here for FREE. 

2) Follow setup instructions 

3) After installation you will see new icon in systray with 2 letters (CZ). If you don't see, please run CamZoomer from your Start menu. 

4) Right mouse click on the CamZoomer icon from systray and click Choose webcam from menu. 

5) Select webcam you want to use for PAN-TILT-ZOOM and to be available from the several applications the same time and press Ok button. 

6) Run you webcam application and choose CamSplitter capture device (IMPORTANT: You should use CamSplitter as webcam device, not your original camera). 

7) Now you can manage your static camera from keypad. 



IV. How to use:



1) PAN: Press keypad 4 to move LEFT. Press keypad 6 to move RIGHT. 

2) TILT: Press keypad 8 to move UP. Press keypad 2 to move DOWN. 

3) ZOOM: Press keypad + to zoom IN. Press keypad - to zoom OUT. 



V. Software and hardware requirements:



1) Pentium 400 with 64MB RAM or better 

2) Webcam connected to computer 

3) Windows NT/2000/XP/2003 

