				CEAMP - TECHNICAL NOTES

CEAMP(Common Emitter Amplifier)

About CEAMP 
Requirements
Installation
Operating from DOS
Operating from Windows 3.x
Operating from Windows 95
Using CEAMP 
Shareware Cost
COPYRIGHT DECLARATION

Requirements:

   80286 or better
   DOS 6.0 or better
   83K RAM
   95K hard drive space available
   VGA monitor or better

ABOUT CEAMP:

      CEAMP is a computer assisted circuit design program for the design
   of common emitter bipolar transistor amplifiers .  There are many circuits
   in electronics that are a standard configuration.  The only difference is
   the component values, which are variable depending on what is required of
   the circuit.  Knowledge of the many electronic math formulas are required
   to get the component values right for the desired output of these 
   standard circuit configurations.  It can take hours, days, even weeks of
   plugging numbers into these formulas to get the right component values.
   Then the component values have to be rounded to the standard values 
   available on the market.  Sometimes a prototype of the circuit must be 
   built (especially if all the formulas are not known) and then troubleshot
   to get the right component values.  CEAMP eliminates all these problems.  
   CEAMP does all the head work, knows all the formulas, and selects 
   component values that are available on the market.  The electronics 
   hobbyist's dream come true!

Installation:

   Unzip the file CEAMP.zip to a temporary directory. Create a directory
   named CEAMP on the c:\ drive and copy or move all files to that 
   directory. NOTE: CEAMP must be installed on the c: drive because it 
   calls data files from the c:\ drive.  

OPERATING FROM DOS:
	
      CEAMP is a DOS program.  In the directory CEAMP find the file 
   CEAMP.BAT and move the file to the root directory (c:\).  All that is
   required to start the program is type CEAMP at the DOS prompt.  If you 
   don't want this batch file in your root directory add CEAMP to the
   path statement in your autoexec.bat.  Again you will then just type 
   CEAMP at the DOS prompt.

OPERATING FROM WINDOWS 3.xx:
	
	In the CEAMP directory there is a file named CEAMP.ICO.
   CEAMP.ICO is the program icon.

SETTING UP IN WINDOWS:
   (1) Open the program group in program manager that you want to run
       CEAMP from.
   (2) Select File-New-Program Item.
   (3) In the program name box type CEAMP (what ever you want to name it).
   (4) In the command line box type C:\CEAMP\CEAMP.EXE
   (5) In the working directory box type C:\CEAMP 
   (6) Select change icon button then the browse button. Go to the CEAMP 
       directory then select CEAMP.ICO.  Click OK.
   (7) Double click the icon to run the program.

OPERATING FROM WINDOWS 95:
	
	When running CEAMP in Windows 95 it must be run in a DOS session.
    Otherwise it runs exactly the same as it does in DOS, and Windows 3.xx.

USING CEAMP:

   THESE CIRCUITS ARE NOT FOR USE IN LIFE SUPPORT OR LIFE CRITICAL SYSTEMS
   Do not use the tab key.  It will run the cursor and the blue input line
   across the screen. There's no print, save, or mouse features with this
   program.  This is the reason the program is only $10.00.
	There is no on line help in CEAMP.  All necessary information for 
   operation is on screen.  If an out of range, or improper value is entered
   the program will advise the user, and start that particular input request
   over again.
	Because there are so many possible outcomes from these circuits it
   is impossible to build and test the circuits.  The formulas used in
   calculating these circuits are proven electronic math formulas.

SHAREWARE COST:

	This software is shareware.  You can evaluate it for 30 days then
   you must pay for it, or stop using it.  This shareware incorporates a
   time lock and will stop functioning after 30 days from the time of
   installation.  Upon payment of $10.00(US) you will be sent the version of
   CEAMP with out the time lock.  The registered version can be sent to
   you by e-mail attachment (the preferred method) or by disk in the mail.
   Please add $2.00 shipping and handling if you require a disk in the mail.
   
			Send check or money order to:

			   James Schmitz (CEAMP)
			    11602 Flagstone Creek
			      Corpus Christi Tx.
			     USA	   78410
   
   Don't forget your e-mail address.   My e-mail address is Jimpy@trip.net
   
COPYRIGHT DECLARATION:

		     Copyright (C) James Schmitz, 1997
			      All rights reserved

	This computer software is protected by copyright law and
   international copyright treaties.  Copying this software without the
   permission of the owner is copyright infringement, and the law imposes
   penalties on infringers.  This software is not to be reverse engineered,
   or disassembled in whole or in part without the permission of the Author.
   You my distribute this software freely.  However, this software is not
   to be distributed for profit.
	This software is not for use in the design of life support, life
   critical, or safety systems.  The creator of this software is not liable
   for damages resulting from the use of this software.

				      END