			
						
			     HeliQuake v0.4	
			    by: Jared Davies	
						
			

-[Contacts]-
WWW: HTTP://home1.gte.net/rmdavies/
E-Mail: rmdavies@gte.net

-[Specs]-
Progs.dat:[	yes	  ]
Source:	  [	no	  ]
sounds:   [	no	  ]
Models:   [	yes(sorta)]

-[Modes]-
Single play:[	sure			      ]
DeathMatch: [	wouldn't have it any other way]

-[Whats New]-
	v0.4:
		I've made the helicopter an object that you get instead of hitting an
		impulse to get it. Added better model support so it can show both the 
		player model and the helicopter models. i also added dual gun pods and
		stinger missiles.

-[Description]-
	HeliQuake is short for Helicopters for Quake... ingenius don't you think.
	Well so far it isn't much... i have the basic controls for the helicopter
	down and 3 weapons for you to use while your in the helicopter.. this is
	used best when you're using a mouse to control yourself with +mlook because
	where you look is where you go. You'll figure it out.. i hope.. the 3 weapons
	are:
			1: Mini-Missiles	-rapid fire, medium damage
			2: Mini-Gun		-Very rapid, small damage(adds up though)
			3: Bombs		-10 missils => 200pt radius damage
			4: Dual Gun Pods	-rapid fire, medium damage
			5: Singer Missiles	-you have to lock on to a target first
	i will soon be adding guided Pheonix Missles, Hellfire missiles, and Napalm.
	i also enjoy hearing wether you like the patch or what improvements it needs
	send that stuff to:
				rmdavies@gte.net

-[Commands]-
OK here goes=>

	IMPULSE 103	-Puts you in the Helicopter(single player mode only)
	IMPULSE 100	-folled by another impulse to set Collect speed
	IMPULSE 106	-increase collect speed
	IMPULSE 107 	-decrease collect speed
	IMPULSE 108	-toggles hover mode on & off
	IMPULSE 109	-sets sets velocity_z to zero so you stop rising/falling and level out
	IMPULSE 30	-chase cam toggle
	IMPULSE 31	-laser pointer toggle

Well that was sure simple... i hope
For IMPULSE 100 do this=>
	IMPULSE 100	-says to look for the next impulse to get collectspeed
	IMPULSE ##	-if ##=50 then you would rise with velocity 50

-[Known Error's]-
	I get an Overflow not set type of error every now and again... it does
	however reset the config.cfg file you have in quake\heliquak to the
	default config.cfg to i suggest making a backup of your config.cfg file.

