Concorde SST

INS (Inertial Navigation System) Upgrade & Patch

CONTENTS

Upgrades your Concorde INS Gauge to a fully working version
Now Programmable and user definable

See the seperate, included INS_MANUAL.ZIP For full use instructions.

PATCH contents.
These 2 service fixes only apply to the early issue of Concorde SST, but they will work with any version of Concorde.
Fixes ADVENTURE PROBLEMS (loss of ATC At New York coast)
Fixes ENGINE START INSTRUCTIONS (Now tells you to use CTRL SHIFT +F4)

INSTALLATION

1) UNZIP ALL FILES to a temporary location. You will 3 files Setup.exe. This readme.txt and INS_manu.zip in this temp location.

2) RUN THE SETUP.EXE PROGRAM from the temporary location. (do NOT try to open it with winzip). When asked for a path from the Winzip self extractor put in here the path to the root directory location that you installed FS98 to. This is Normally
C:\program files\microsoft games\flight simulator\   
When unzipped 'close' the winzip window. 

3) Unzip the INS Manual (found in the temp location) and read it before use of the INS.

4) Fly! :-) 


If prefered:

Manual installation to 'Concorde SST'

Unzip all files to a Temporary location
Copy *.GAU FILES to your FLIGHTSIM98\GAUGES folder 
Copy *.BMP Files to your AIRCRAFT\FSD_PANELS\FSD.CONCORDE\ folder
Copy *.CFG  Files to your AIRCRAFT\FSD_PANELS\FSD.CONCORDE\ folder 

Manual Installation to OTHER AIRCRAFT

Unzip all files to a Temporary location
Copy ALL *.GAU FILES to your FLIGHTSIM98\GAUGES folder
Copy INS.BMP to your intended AIRCRAFT\PANEL folder

Now you must install the following gauges to your panel

gaugexx=DC_concorde.ins.server, x, y, z
This gauge MUST be installed to the MAIN PANEL WINDOW
gaugexx=DC_concorde.ins.small, x, y, 100 
This can be fitted in any spare space on your panel. 

Finally install the Large INS Panel by Pasting the Following lines to your panel.cfg

[WindowXX]

file=ins.bmp
size_mm=1024
windowsize_ratio=1
position=8
visible=0
ident=74

gauge00=DC_concorde.ins.big, 646, 395, 363

MAKE SURE YOU DEFINE THE WINDOW XX as the last in your sequence at the start of the Panel .cfg as follows :- windowXX=INS System

All files are copyright 1999 Flightsim Developers. No unauthorised use or Uploading
is allowed. This file is available ONLY from the Publishers 'The Associates'. 26-2-99