-----------------
NTS/P v1.1
-----------------

Written by Kuhas
E-Mail: kuhas@quakemarines.com
Web Page: http://www.quakemarines.com/kuhas/
Clan Web Page: http://www.quakemarines.com
Sunday, October 12, 1997

-----------------
Requirements
-----------------

- Quake
- About 7.4 MB of hard drive space
- A computer :)

-----------------
Introduction
-----------------

NTS and NTSP (Newbie Targeting System and Newbie Targeting
system Plus) are based on NTS 1.0 and NTSP 1.0, which were based
on an improved version of Chris Pimlott's crosshair improvement. 
I felt that NTS/P 1.0 could be improved, so I began developing NTS/P 1.1,
which is what you are using now.

These are designed to provide you with a better Quake crosshair than
the default crosshair, in looks and accuracy.

NTS is just a crosshair improvement, while NTSP is a crosshair
improvement, and includes player marking, to make other players in
the game easier to see.

----------------
Instructions
----------------

1. Make sure that you do not have a pak2.pak file in your QUAKE\ID1
     directory already. If you do, rename the other pak2.pak file to
     pak3.pak or the next consecutive pak*.pak file. If you already
     have a pak2.pak and it is Christ Pimlott's or my crosshair
     improvement pak file, back his up somewhere, and install this over
     it.
2. IMPORTANT: Do NOT copy over a pak2.pak file unless you know
     it is backed up somewhere. READ THE DISCLAIMER.
3. Select all three options once you have loaded NTS/P 1.1 and then
     use the Drive/Path boxes on the right, to tell NTS/P where your
     QUAKE\ID1 directory is. As you do this double check to make sure you
     do not have a pak2.pak file. If you do, back it up, if you have
     backed it up already, proceed by pressing the [NEXT >] button.
4. Press [NEXT >] if all the settings are correct.
5. Double check your directory to install the pak file to, and press
    [NEXT >] if it is correct. If not, press [ < BACK]
6. Click on [FINISH] to install the NTS/P .pak file, or [Exit] to abort
     the installation.
7. Exit NTS/P when installation is complete.
8. Just start the game as you normally would, and your new aiming
     system will be visible. If not, make sure you type: [crosshair 1]
     (don't type in brackets) at the Quake command line. To disable the
     crosshair, simply type in [crosshair 0] at the same command line.
9. To uninstall/remove the NTS/NTSP crosshair, simply delete your
     pak2.pak file, or whichever pak*.pak file you renamed it to.

Most people just have pak0.pak and pak1.pak in their id1 directory.
This is the most important part of Quake. Do not rename the NTS
pak2.pak ... to pak0.pak or pak1.pak!!! It will destroy your Quake.
Instead, unless you already have a pak2.pak file, it will be perfectly
safe to unzip 'as is' into your QUAKE\ID1 directory, after checking it of
course.

----------------
Disclaimer
----------------

This product is 'as is' since it is free. I take/claim NO
responsibility for it! By using is, you are using it at your own risk! If
you have a question or concern before you install it, just ask me. If 
you are worried that it will do something wrong, then backup ALL
your Quake files. You should have them backed up anyway.

I have tested this program very in depth, and have not had any problems.
If you follow directions you will have no problems. Feel free to
distribute this program, it is freeware, I just ask that you distribute it
unmodified. Thank you.

NTS/P is Copyright 1997, by Kuhas. Please distribute this program
unaltered.
