pcANYWHERE32 for Windows 95, Windows 98 and Windows NT    Version 8.02
Copyright 1998 Symantec Corp.  All Rights Reserved.       2JUNE98

======================================================================
                 Thank you for choosing pcANYWHERE32

If you experience problems with pcANYWHERE32, please check the manual 
and this document for any information that may pertain to your 
problem. We also encourage you to check the Tech Support FAQ's 
location (see address below) which contains useful information 
pertaining to various pcANYWHERE32 questions. 

If this information does not help, you can contact Symantec Technical 
Support at (541) 465-8430. We also provide the following online 
service and support options:

Internet	HTTP://WWW.SYMANTEC.COM 
		(OnLine Chat, Technical Support, Downloads)
		FTP.SYMANTEC.COM (downloads only)
News Server	HTTP://SERVICE.SYMANTEC.COM (Tech Support FAQ's)
Symantec BBS	(541)484-6669 
CompuServe	Type "GO SYMANTEC" at any prompt
America Online	Type keyword "SYMANTEC"

======================================================================

This file includes additions and changes to the printed manual. It
also includes important upgrade, troubleshooting and compatibility
information.

Please read this information before using pcANYWHERE.

This document is organized into four sections:

1. Installation
2. Compatibility
3. Corrections and Additions
4. New Utilities

======================================================================
1. INSTALLATION
======================================================================

1.1 Upgrading from a previous Version of pcANYWHERE32
    -------------------------------------------------
  If you have a previous version of pcANYWHERE32 installed either
  uninstall the previous version FIRST then install version 8.02 
  OR install directly over your existing version. Attempting to keep
  both versions can cause pcANYWHERE version 8.02 not to function 
  correctly.

1.2 NETWORK INSTALLATIONS
    ---------------------
* Administrators creating a pcANYWHERE32 NT workstation installation 
  from a network drive need to alter the "Add Be A Host" template 
  before workstation users begin to create Host session items. The 
  default template setting "Run as a Service" should be unchecked if 
  Host items files are stored on the network. Host files stored on a
  network drives will not launch if "Run as a Service" is checked.

* Do not restrict access to the pcANYWHERE installation directory by
  setting callers' security privileges to "No Access". Callers must be
  given read-access to these files.

* In order to access Administrator options, a workstation install must
  be performed on the Administrator's machine. If the /A option is
  invoked without first installing a workstation, you will not be
  prompted for an Administrator password.

* If Host or caller files are located on a network drive, you will not
  have access to the "Launch Host at startup" feature.

1.3 Standalone Installations
    ------------------------
  It is not recommended to install the standalone version of 
  pcANYWHERE32 on your network. Installing the standalone version
  on the network instead of the local drive will cause a "Device file 
  aw_host.386 cannot be found" error upon reboot after the 
  installation. If you wish to use pcANYWHERE32 from the network 
  please install a workstation installation.

1.4 International Installations
    ---------------------------
  Installing the International English version of pcANYWHERE32 on 
  a PC that has a Internationalized Symantec product already installed
  will cause your existing LiveUpdate to be replaced by International
  English version of LiveUpdate.

1.5 BackOffice Installation
    -----------------------
  The Package Distribution File (.PDF) required for System
  Management Server software distribution is located in the 
  \BKOFFICE directory. Import the PCAW32.PDF file using the Import 
  utility within the System Management Server Administrator when 
  creating a new pcANYWHERE32 package. Copy the contents of all 
  seven disks located in \installs\pca32 into ONE directory on your 
  BackOffice server.  For more information on how to setup and
  distribute applications from your BackOffice server please refer 
  to the SMS documentation.

  
======================================================================
2. COMPATIBILITY
======================================================================

2.1 pcANYWHERE 5.0 for DOS 
    pcANYWHERE 2.0 for Windows
    pcANYWHERE 7.x for Windows 95 and Windows NT
    --------------------------------------------

* pcANYWHERE 2.0x TCP/IP Hosts can be made visible to a pcANYWHERE32
  Remote browse list in two different ways:

  1. Specify the Host IP explicitly on the Remote TCP/IP browse list,
     located under Application Options, or

  2. Enhance TCP/IP on older pcANYWHERE 2.0 Hosts with the file
     (AWCMTCP.DLL). This file is included in the self extracting file 
     Ports_20.exe which is available on the Symantec BBS or Symantec 
     forum on CompuServe.

* Executing an AutoXfer(tm) procedure with a previous version of 
  pcANYWHERE will "End session when finished" even when this feature 
  is not enabled.

* Simultaneous File Transfer and Remote Control is only supported
  between pcANYWHERE 7.5 or later Hosts and Remotes.

* If you experience slow performance when connected to a pcANYWHERE32
  host (version 7.5 or higher) from pcANYWHERE 5.0 for DOS or 2.0 
  for Windows remote try turning off the remote's cache file.

* Previous versions of pcANYWHERE (2.0, and 7.x) do not support
  Host conferencing. pcANYWHERE v8.02 Conferencing hosts will be 
  shown as BUSY in version 2.0 and 7.x remote host lists.

* Data Conversion

  Under NT, when converting pcANYWHERE configuration files 
  configured for IPX the connection type will be changed to SPX.

  The master password from a previous installation of pcANYWHERE 2.0x
  should be disabled before converting files.

  Data files configured as "Shared" under a previous Administrator
  installation of pcANYWHERE cannot be converted to pcANYWHERE32.

2.2 NORTON UTILITIES 2.0 for 95 and NT
    ----------------------------------
Users of Norton System Doctor should disable notification when 
operating a pcANYWHERE32 host.  When rebooting a host machine 
remotely, Norton System Doctor message dialogs may keep the 
pcANYWHERE host from resetting properly.

2.3 NORTON ANTIVIRUS 2.0 for 95 and NT
    ----------------------------------
If you have your pcANYWHERE32 Host set to Launch at Startup
and you reboot your host computer NAV might halt the reboot process
when a virus is found.

To allow NAV to inoculate the virus and complete the
reboot so that you may reconnect to your host computer set the
following options in NAV.

1. In the Alert tab set "Remove Alert Dialog after __ Seconds" to
   a numeric value.

2. In the Inoculation tab Disable "Inoculate Boot Records and 
   System Files" to skip this action 

		OR
 
   Set Inoculation to "Inoculate Automatically" for when an item
   has not been inoculated or changed.

3. In the Auto-Protect tab set "When a Virus is Found" to "Repair 
   Automatically" 


2.4 WinFAX Fax/Data Call Discrimination
    -----------------------------------
Please note that if you are running Talkworks please see topic FAX
DATA/VOICE DISCRIMINATION. In order for WinFax to give control of 
an incoming telephone call to a waiting pcANYWHERE32 Host, the 
WinFax feature "Call Discrimination" must be enabled.  

To enable call discrimination in WinFax, follow the procedure below:

1. In Winfax, click on "Setup" drop down menu and then click on
   "Receive".
2. Enable "Automatically answer incoming calls"
3. Click on the "Advanced Tab and enable "Direct data calls to 
   an available data communications program"***.
4. Click on OK.

Run WinFax(using the Controller only is fine as well). Start the
pcANYWHERE Host. WinFax 8.0 will answer the call. If it is a fax 
call, WinFax 8.0 will handle it as normal. If it is a data call,
WinFax 8.0 will hand the call off to pcANYWHERE32.

***If this option is grayed out, WinFax does not detect your modem as
   being capable to support this feature. To verify this, please see 
   the Topic "What to do if the call discrimination option is grayed 
   out." 

***What to do if the call discrimination option is grayed out.
   If your modem is capable of call discrimination, you may
   still be able to use the feature, however modifications to the
   Windows 95 registry will have to be made.  For assistance with 
   this, please contact WinFax Technical Support.  To check if your
   modem is capable of call discrimination before contacting Technical
   Support, please follow the procedure below:
 
 1. Open HyperTerminal and call this new session "Test".
 2. When it prompts for a telephone number, put in 9999 and click on
    dial and then click CANCEL.
 3. On the blank screen type ATZ. Don't worry if you do not see this 
    on screen, just type it in and hit enter. 
 4. On the screen type AT+FAE=1 and hit enter.
 5. If the response is OK, the modem should support call 
    discrimination in Class 1 Fax mode.
 6. If the response is error, type AT+FAA=1 and hit enter.
 7. If the response is OK, the modem should support call 
    discrimination in Class 2 Fax mode.
 8. If the response is error, the modem does not support call
    discrimination in either Class 1 or Class 2 Fax mode. Please 
    contact the modem manufacturer for more information.
 
 If your modem is found to support call discrimination in either
 Class 1 or Class 2 Fax mode and the "Direct data calls to an 
 available data communications program" option is not available,
 please contact Winfax Technical support for more information.


FAX/DATA/VOICE CALL DISCRIMINATION
 
 For 3-way call discrimination between FAX, DATA and VOICE calls, 
 Talkworks must be installed and a special dialing sequence must be 
 setup on the remote side.  To setup 3-way call discrimination, follow
 the procedure detailed below:
 
 1. Enable "Direct data calls to available data communications 
    program" as detailed in topic Fax/Data Discrimination, if the 
    option is gray please see topic "What to do if the call
    discrimination option is grayed out."
 2. In Talkworks setup either use a supplied greeting or record your 
    own ensuring that the greeting is at least 5 seconds in length.
 3. Run WinFax with Auto Receive enabled. 
 4. Start the pcANYWHERE Host session.
 5. WinFax 8.0 will handle 3-way call discrimination as detailed 
    above. Users may also elect to setup a DATA ONLY Mailbox in their 
    Talkworks Profile to make the connection easier. For more 
    information, please consult your WinFax User's Manual.
 6. On the remote end, the user must add the following to the dial 
    sequence: xxx-xxxx,,,,,,*,,9* where 'x' represents the number of 
    the host being dialed. The rule of thumb is that for every ring 
    WinFax is set to answer use 3 to 4 commas . For example if WinFax 
    is set to answer after 3 rings the dialing sequence is 
    441-0774,,,,,,,,,*,,9*.   See note for more information.
  
 Note: The initial 12 second pause is the wait time for WinFax to
       answer the call and begin playing the greeting. The first '*'
       is to tell WinFax that the caller is attempting a remote 
       operation. This '*' must be entered while the initial greeting 
       is playing. The next 4 seconds is the wait time for WinFax to
       prompt the caller to enter the password. The '9*' tells WinFax
       that the call is Data and passes it off to pcANYWHERE32. The 
       amount of wait times may vary from PC to PC, depending on how
       many rings WinFax is set to answer on and the length of the 
       greeting. For more information, please consult your Winfax 
       User's Manual. 

**Important**
Certain USRobotics 28.8 modems, with EPROM dates predating '96, 
do not handle call discrimination properly. Please contact USRobotics
for more information.


2.5 WINDOWS NT
    ----------
* For optimal performance under Windows NT,  it is recommended
  that pcANYWHERE32 NT Hosts are configured to "Run as a Service".

* Those who see a performance decrease when opening a DOS window on a
  pcANYWHERE32 NT Host can improve the speed by altering NT tasking,
  located under System in the Control Panel. The default setting 
  should be changed from "Best Foreground Application Response 
  Time", to "Foreground and Background tasks equally responsive".

* Under Microsoft NT 4.0, go to the control panel, click "System", 
  click the "Performance" tab and mode the slider bar all the way to 
  the LEFT. Foreground and background tasks are now equally 
  responsive.

* If you have problems with your remote keyboard (such as non-ALT keys
  selecting menus) when connected to a pcANYWHERE32 NT Host, try 
  individually pressing the ESC, Left and Right Shift, ALT, or
  CTRL keys.

* You may experience difficulty changing desktop resolution and color
  depth under Windows NT 4.0 in certain conditions such as installing 
  new video card hardware or changing between VGA (safe mode) and 
  back again.
  
  To resolve this problem:
    1.  Uninstall pcANYWHERE32
    2.  Within the NT Control Panel, change to the proper resolution
    3.  Reinstall pcANYWHERE32

* When connected to a pcANYWHERE32 host under Windows NT 4.0, the use
  of non-standard cursors (Ex. High-colored or animated) may cause
  unpredictable results, such as improper translation of the cursor
  on the remote and/or markedly slowed session performance.

* If you are using a pcANYWHERE DOS 5.x remote to connect to an NT 4.0
  host and encounter video problems, set the host video mode selection
  to run in "Compatibility" mode.

* If you are using NT Authentication and you are using an NT Domain
  user to login into to a pcANYWHERE host then that user must be given
  the Log On Locally right. If the the NT Domain user account does not
  have this NT User right you will not be able to login to your host.

* When setting up a caller (NT user privileges) to use Trusted Domains
  be sure to add user through the "Add User" wizard to see the Trusted
  Domains. If you use the "New Item" wizard instead of the "Add User"
  you will not see all the Trusted Domains in the list. 

* NT 4.0 Hosts configured for SPX protocol will remain in the
  remote's SPX host list as an available host after the host has
  been canceled. To solve this problem you must add the SAP agent to
  your HOST'S Network configuration.

  To add the SAP agent perform the following steps on your NT host:

 1. Open Control Panel, 
 2. Select Network 
 3. Select Services
 4. Select ADD button
 5. Select SAP AGENT from the list
 
 Note: If you have a service pack already installed it must be 
       reapplied after adding the SAP Agent.   

* If you unlock your NT Workstation and you see a screen with the
  color of your desktop but nothing else, it appears that you are
  stuck.  You can perform the following steps to get out of this
  condition:

 1. Press CTRL-ALT-DEL to bring up the NT Security Dialog.  
 2. Select either "Logoff..." or "Shutdown...".  
 3. During the Logoff / Shutdown process NT will prompt you to save
    any unsaved work.
 4. When you are presented with the NT Logon Screen, either by Logoff
    or Shutdown (and the corresponding reboot), the problem will be
    gone and you can re-log into Windows NT."
  
2.6 WINDOWS 95
    ----------
* On Windows 95 remotes only, when selecting CTRL+ALT+DEL in session,
  the CTRL and ALT key are left in the depressed state on the host. In
  session, it may appear as if the keyboard is locked. To correct
  this, the key may be toggled again on the remote or the focus can be 
  changed to the remote desktop and back to the pcANYWHERE terminal 
  window.

* If you have Microsoft's Dialup Networking v1.2 for Windows 95
  installed, it is recommended that you update to the latest version
  of Winsock 2. For more information about this update and how to
  install it please contact Microsoft. 

2.7 WINDOWS 98
    ----------
* pcANYWHERE32 does not currently support the multi-monitor feature
  included in Windows'98.

* pcANYWHERE version 2.0x does not support the Windows '98 operating 
  system.  When using Windows '98 please use pcANYWHERE32.

2.8 WINDOWS NT 5.0 Beta Support
    ---------------------------
* We have included a preliminary NT 5.0 migration.dll and patch to
  allow pcANYWHERE32 testing and use with NT 5.0 betas, however we 
  cannot guarantee any level of functionality due to the continuous
  change associated with beta programs. To aid NT 5.0 beta users the 
  pcANYWHERE team will from time to time post patches at the Symantec
  website to help facilitate the use of pcANYWHERE32 with NT 5.0. It 
  should be noted that our Tech Support team will not field any NT 5.0
  support calls until NT 5.0 is actually released. We will however 
  gladly accept any comments or suggestions at (pca_nt5@symantec.com)
  until that time.

* Steps when migrating
  1) During the upgrade, the user is prompted "Do you have any
     additional install packs to provide ?" Choose Yes to this option.
  2) Remove "Symantec pcANYWHERE32" from the list of install packs to
     use.
  3) Add an additional pack. Browse to the pcANYWHERE32 listing.
  4) Observe that there is now a "Symantec pcANYWHERE32" listing.
  5) Select Next.
  6) Observe that the system compatibility report does not contain
     pcA32. If it does appear there, do not migrate. Cancel and repeat 
     the above steps.

2.9 International Issues
    --------------------
* On Windows 95aJ remotes only, when selecting CTRL+ALT+DEL in 
  session, the CTRL and ALT keys are left in a depressed state on 
  the host.

* Currently the Connection Dialog Host List does not support Double
  Byte Character Sets (DBCS). This may cause some displaying problems.
  You will still be able to connect to the Host, but the name will
  contain different characters.

* NEC PC98 users - If your ALT key (GRPH) locks in session, contact
  NEC or your computer distributor for the keyboard driver upgrade, 
  with the filename KBD98UPD.EXE.

2.10 NOVELL NETWARE
     --------------
* Multiple sessions using IPX connections are not supported under 
  Microsoft Windows 95.

* pcANYWHERE32 SPX Host lists are supported under Windows NT 3.51 
  ONLY if the Novell Netware client for Windows NT is installed. 

* The NetWare Client for NT must be installed BEFORE pcANYWHERE32
  is installed. If you install the client after pcANYWHERE32 is 
  installed you will lose functionality for both the client and 
  pcANYWHERE32. 

  To properly install both the client and pcANYWHERE32 perform 
  the following steps:

  1. Uninstall pcANYWHERE32
  2. Install the Netware client for NT
  3. Install pcANYWHERE32 

2.11 Banyan Vines
     ------------
Multiple sessions using Banyan Vines connections are not currently 
supported under Microsoft Windows 95 and NT 3.51/4.0

2.12 CAPI
     ----
AVM/A1 cards running the North American CAPI drivers (Windows 95) do
not support channel bonding. Checking "Attempt Channel Bonding" in
pcANYWHERE32 may produce unpredictable results.

Contact AVM for information on updated drivers.

If you plan to use channel bonding, make sure the host option called
"attempt channel bonding" is enabled on the pcANYWHERE32 host.

2.13 NetBIOS and NetBEUI
     -------------------
Changes to the NetBIOS driver eliminates the need for the LANA numbers
to match from the OS to pcANYWHERE. pcANYWHERE remotes can now select
"AUTO" for a LANA number. This will send out a broadcast packet to all
NetBIOS/NetBEUI users on the network.

2.14 Infrared
     --------
In-session video performance on NT and 95 could be slowed when using
Microsoft's Infrared driver. To avoid this problem perform the
following steps:

1. Open Control Panel and select Infrared
2. Select Monitor Preferences
3. Disable the option "Display the Infrared Icon in Taskbar"

2.15 VIDEO ADAPTERS AND GRAPHICS ACCELERATORS
     ----------------------------------------
If you experience problems with a 3D graphics accelerator video
adapter, you may need to disable some of the adapter's advanced
accelerator features.

* Testing with the Matrox Millenium indicates that the PowerGDI
  Acceleration option should be disabled when the adapter is used 
  with a pcANYWHERE32 Host.

* Diamond Stealth 3D 2000 - If you observe horizontal lines on your
  desktop when windows are dragged, contact Diamond 
  (www.diamondmm.com) for the latest Windows 95 drivers, 
  version 4.04.00.2104 posted 12/10/96, 3D952104.EXE

2.16 MODEMS
     ------
If you experience connection problems using modems under WIN95, try
lowering the default FIFO buffer settings, or changing the default
data rate. These options are found in the modem's Connection
property page, under the headings "Port Settings" and "Maximum
Speed".

2.17 WINDOWS NT RAS
     --------------
* To avoid conflicts with the Remote Access Service and pcANYWHERE 
  modem hosts, a pcANYWHERE network host should be setup instead.  
  For more information, refer to the pcANYWHERE manual under 
  "Remote Networking".

* After successfully configuring a Remote Networking item, a
  pcANYWHERE32 Remote Control item named "RAS" is created in the 
  Remote Control window. This item is not to be used for your 
  dial-up networking connections. Click "Remote Networking" and 
  choose the appropriate item.

2.18 SERIAL PORT HARDWARE
     --------------------
Many older and low-end PC's use 8250 UART chips for their serial
ports. These chips do not adequately support large amounts of data at
high data rates. To get the best performance from pcANYWHERE and other
communication applications, you should use a serial I/O card with a
16550A UART or similar chip. These are available at many computer
stores.

2.19 MICROSOFT QuikRes
     -----------------
Changing the pcANYWHERE host desktop resolution or color depth 
on-the-fly with the freeware program "QuikRes" may cause the host to 
lose desktop optimization or end the connection.

2.20 Video Conferencing
     ------------------
* To configure your video conferencing software to work with 
  pcANYWHERE complete the following steps:

On your PC that will act as the pcANYWHERE remote:

 1. Go to your start menu and select Run
 2. Select Browse and locate your pcANYWHERE install directory.
    For example, the default install directory is c:\PROGRAM FILES\
    pcANYWHERE\
 3. Locate the file Videocon.exe and execute it.
 4. Enter the correct path where the video conferencing software 
    program is located on your host PC.
 5. If you want to pass a TCP/IP address to your video 
    conferencing software enter the software's command line switch.
 6. Select OK

On your PC that will act as the pcANYWHERE host:

 1. Start the pcANYWHERE TCPIP host
 2. Start the CuSeeMe Listener feature on your pcANYWHERE host 

Complete the connection

 1. Establish a pcANYWHERE TCPIP connection between the remote and
    host
 2. ON the Remote's In-session toolbar select the Video Conferencing
    button.

2.21 Nuts & Bolts software
     ---------------------
pcANYWHERE will not function under Windows 95 if the "Write protect 
all VxD's and System Memory" item within the Bomb Shelter component 
is enabled. This item is enabled by default. Disable this item and 
pcANYWHERE will function with this software.

2.22 FTP CORP. "ONNET" STACK USERS
     -----------------------------
pcANYWHERE users owning FTP Corporations' OnNet Stack do not have 
access to the SPX device protocol under pcANYWHERE32.

2.23 TCP/IP FIREWALL SECURITY
     ------------------------
Network administrators may configure their network security to allow 
TCP/IP connections over the Internet.  pcANYWHERE32 uses two ports, 
5631 and 5632, which must be left open by the system administrator 
to allow connections through the firewall.

======================================================================
3. CORRECTIONS AND ADDITIONS
======================================================================

3.1 COMMAND LINE OPTIONS
    --------------------
*You can use the following command line options from the DOS prompt to 
 start Gateways, Hosts, Remotes, or Online functions:

 <path to pcaw32>\AWHOST32.EXE <path to pcaw32>\data\<file>.bhf
 <path to pcaw32>\AWREM32.EXE  <path to pcaw32>\data\<file>.chf
 <path to pcaw32>\AWGATE32.EXE <path to pcaw32>\data\<file>.gwf
 <path to pcaw32>\AWONL32.EXE  <path to pcaw32>\data\<file>.osf

 You can now use a command line option to have a pcANYWHERE host call 
 a remote.  At the command prompt, type:

 AWHOST32.EXE <file>.BHF /c (for Windows 95)
 AWHOST32.EXE <file>.BHF /d /c (for Windows NT)

NOTE: This command will not work if the host is waiting on two devices

* Scripts may be executed from the command line by using the following
  syntax:

    <path to pcaw32>\AWREM32.EXE <path><scriptname>.scr

* Allow host to specify the remote's phone number from the command
  line when the host is calling the remote.  

Format:

<path to pcaw32>\AWHOST32.EXE <path to pcaw32>\data\<file>.bhf /cN
 
Where: 

 N - is the phone number you wish to dial (Ex. 1234567)
     The phone number can be at most 30 digits.

<file>.bhf - is a host file configured for modem or TAPI. 

Example:

AWHOST32.EXE c:\program files\pcanywhere\data\modem.bhf /c1234567 

* Allow host to specify the remote's TCP/IP address or host name
  from the command line when the host is calling the remote.

Format:

<path to pcaw32>\AWHOST32.EXE <path to pcaw32>\data\<file>.bhf /cA

Where:

 A - is the TCP/IP address (Ex. 255.255.255.255) or
     host name (Ex. MY_PC).

3.2 Custom Install Path for Silent Installs
    ---------------------------------------
You are now able to push a silent install of pcAW to a drive 
and/or path of your choice.

Option #1 - This option allows you to change the silent install 
            path from the command line.

 * is3setup.exe <install path you choose> /s

Option #2 - This option uses the setup.iss file to change the 
            silent install path.

 * Open the setup.iss file.
 * Under the "Applications" section add the drive and path to:
   InstallDir=<install path you choose>.
 * Save and close.
 * Run setup.exe /s or is3setup.exe /s
  
3.3 Stophost Utility
    ----------------
This utility is used to cancel waiting pcANYWHERE32 hosts outside 
the pcANYWHERE application. This utility is useful when used in
a DOS batch file or a NetWare login script, thus giving you the
ability to cancel pcANYWHERE hosts on one or more workstations
on your network. The Stophost.exe utility can be found in your
pcANYWHERE installation directory.

3.4 Encryption
    ----------
pcANYWHERE provides two unsupported utilities (MACHKEY.EXE and
CertCons.exe) to help configure and manage your OS's encryption
configuration. For more information on these utilities refer to 
the crypto.txt file located in your pcANYWHERE installation 
directory.

3.5 Host Conferencing
    -----------------
* It is recommended that the host conferencing PC be a Pentium
  class computer, especially if a large number of remotes
  (i.e. 50 or more) will be connecting to the conferencing host. 

* Host Conferencing does not support encryption. If you attempt
  to start an encryption-enabled Conferencing host a message
  will appear indicating encryption will not be used and continue
  to load the TCP/IP Conferencing host. Remotes connecting to the
  Conferencing Host will drop down to the NONE encryption level 
  upon connection.

3.6 Host Administrator
    ------------------
To manipulate host services on other NT PCs outside of an NT Domain,
both the PC running the Host Administrator and the NT PCs you wish to
manipulate must have the same NT account name, password, and 
Administrator rights. This does not apply when manipulating pcANYWHERE
host services on NT PCs within a domain. In this scenario all NT PCs
need only to be logged into the Domain with any account with 
Administrator rights.

3.7 Remote Printing
    ---------------
Win95 users are now able to print from DOS applications remotely.
Remote Printing will work as long as you have a physical or network
printer connected on the host side. 

3.8 Fault Tolerant Booting 
    ----------------------
Because all hardware works differently, pcANYWHERE 8.02 may be
incompatible with your video card or the drivers that it uses.
pcANYWHERE has a built-in mechanism to detect this and disables
itself when this type of scenario comes up.  

If, while your computer is booting up,  you see it reboot itself
for no apparent reason, it may be that pcANYWHERE has noticed 
this scenario and is in the process of disabling itself.  
Please note that pcANYWHERE does not completely disable itself, 
it just changes the defaulted Video Acceleration Mode to Video 
Compatibility Mode which works with all video cards and drivers.

3.9 File Transfer/Virus Scanning
    ----------------------------
pcANYWHERE32 will not scan files contained within ZIP files for 
viruses during file transfers when the "Virus Check All Downloadable
Files" option is enabled.

3.10 CALLER SECURITY OPTIONS
     -----------------------
Under Security Options, the feature "Prompt to confirm connection"
will only function for those callers that are not SuperUsers (that 
is, those who have individual caller privileges defined).

3.11 Security Options 
     ----------------
Under Security Options Tab, the feature "Session Options" has been 
changed. The "Allow any caller to reconnect" has been removed from 
this section. This option is now tied in under the Settings Tab. The 
"Abnormal End of Session" and "End of Session" features now include 
the option "Wait for anyone".     

3.12 Drive Security
     --------------
When Floppy Drive Access under Drive security for a Caller is set to 
NO ACCESS you may encounter a "Media Not Present or Not Formatted 
error" when using Windows 95 features such as My Computer or Explorer.
However, some third party applications installed on the Windows 95 
host may be able to access the floppy drive, but they will not see 
any data. For example, Norton Antivirus will scan a floppy, but the 
file scan will be zero since it could not access files the floppy
drive.

3.13 Voice/Data Switching
     --------------------
In NT 3.51 certain modem strings are issuing an X4 command
(Send no dialtone if dial tone is not detected in approximately
5 seconds). For voice first connections the modem is not going
to hear a dial tone and if a carrier is not detected before the
time out a NO CONNECTION will result. To avoid this problem use
the ATX0 command (blind dial, ignore dial tone and busy signal)
in the Extra Modem Commands field.

3.14 Gateways
     --------
* Modem In/SPX out gateways running on NT 3.51 will not display an 
  SPX host list when a pcANYWHERE remote dials into the gateway.
  To get around this you must type both the name of a host PC 
  and the phone number in your Remote objects property Settings 
  dialog. Ex. 123-4567@SPX_HOST_NAME 

* Gateways now support the Callback feature. If a pcANYWHERE 
  remote calls a gateway with a modem, and the gateway connects to 
  a network host with the callback feature enabled, the host will 
  now call back the remote through the gateway. Callbacks through 
  gateways are only supported when the modem is incoming from 
  remote to gateway and network is outgoing from gateway to host.

3.15 SCRIPT LANGUAGE
     ---------------
* The script command "LOAD CONFIG" is no longer supported. Use the
  commands "LOAD ONLSVCINFO" or "LOAD HOSTINFO" instead.

* pcANYWHERE32 v8.02 scripting language is now year 2000 compatible.
  All date functions now require four digit values and will not 
  work when executed in version 7.x. If your version 8.02 script
  does NOT contain date functions then your script should operate
  correctly when executed in version 7.x.

3.16 OLE
     ---
* pcANYWHERE Host objects do not support OLE when they are "Run as a
  service."  Disable this feature when launching Host objects embedded
  within other applications or run from the file manager.

* The OLE service must be installed and activated under Windows NT
  3.51 before installing pcANYWHERE32; otherwise, you might receive an
  "OLE Initialization failed" message when running pcANYWHERE32.

3.17 Active Windows Tracking
     -----------------------
To enable sound with Active Windows Tracking on your remote PC add 
the following DWORD registry Key:

HKEY_CURRENT_USER\Software\Symantec\pcANYWHERE\CurrentVersion
\WINAW32\Sounds\WindowTrackingSound

1 - turns the sound ON during window tracking
0 - turns the sound OFF	during window tracking

When the key does not exist the default is no sound.

3.18 Mouse Synchronization
     ---------------------
If you are experiencing mouse synchronization problems enable the 
Synchronize Mouse Buttons option in the Applications Option's Remote
Operation tab on your remote.

3.19 TCP/IP 
     ------
* When specifying TCP/IP Host names to connect to, lowercase extended
  ASCII characters (e.g. "") cannot be used, or the name will not
  appear on the list of available Hosts.

* The pcANYWHERE32 TCP/IP driver now supports browsing for Hosts at
  connection time. While the default configuration of this feature 
  will work fine for most users, you may need to make some 
  adjustments on your system. To do this, you will need to use the 
  Windows Registry Editor. See your Windows documentation for more 
  information.

  The following Registry items affect the ability to browse and 
  connect to pcANYWHERE32 TCP/IP Hosts:

  TCPIPBrowseDelay -

  Allows the user to set the delay used when creating the Remote's
  browse list. For a RAS connection, start with a setting of 11. If
  the complete Host list is not received over a WAN connection, 
  start this value at 2 and increase until the entire Host list is
  displayed.

  DisplayHostInList -

  This item can be altered for pcANYWHERE32 Hosts that do not wish 
  to appear in a Remote's browse list, when the Remote is scanning
  the network. The default for this setting is 1. To keep the Host
  from being displayed on a browse list, assign the registry key a
  value of zero.

  TCPIPConnectIfUnknown -

  Use this feature if your Internet service provider filters 
  UDP packets. Test this by specifying a known pcANYWHERE32 
  Host in the TCP/IP Host list. If the status remains "unknown", 
  set the DWORD to 1. (Connecting to a Host whose status is known,
  but is actually busy, will correctly result in a blank screen).

  TCPIPNetBroadcast  -

  Allows you to control TCP/IP network broadcasts for those users
  who would like to limit their network traffic. Create this key 
  as a DWORD and give it value of 0, 1, or 2 depending on the 
  TCP/IP Broadcast you wish to implement. The default value is 1.

  0 - Turns off all TCP/IP Broadcasts, as a result, only those
      hosts specified in applications options - TCP/IP host list
      will appear in a remote's TCP/IP browse list.   
  
  1 - This option is best when accessing pcANYWHERE TCP/IP hosts 
      thru the Internet and on Wide area networks. However, this
      option sends the most TCP/IP packets on your network.

  2 - Use this value to have pcANYWHERE send a typical TCP/IP 
      Broadcast packet on your network. This option sends less
      TCP/IP packets than value 1.

      Note: If your network router filters these Broadcast 
            packets you will not be able access pcANYWHERE hosts
            thru this router.

  TCPIPQueryInterval -

  Usually this item will be used to limit network traffic.  
  Sometimes the additional network queries to refresh the browse 
  list will interfere with getting status lights or making 
  connections. If the user is having a problem getting the status
  lights to turn green, change this value to a very high one such 
  as 1000.  Also, set this registry item to a high value, if the
  user is getting a message that a known ready host is busy when 
  trying to connect to that host and UDP packets are not filtered.
  
  It is especially important to increase this value if the 
  TCPIPBrowseDelay value has been increased, because it is 
  difficult to connect if the network query is going on at the 
  same time. This DWORD registry item allows the user to adjust 
  the amount of delay in seconds between the network broadcasts
  used to refresh the host list. The default is 50 seconds.  
  The minimum setting is 30 seconds.  A setting of zero turns off 
  all list updates.

To add or modify these Registry entries, use the following steps:

1. Run the Registry Editor (REGEDIT.EXE or REGEDT32.EXE)
2. Edit the key:

 HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System

3. Create or edit the DWORD value with the TCP/IP browse option name.
4. Assign the desired value to the entry.

3.20 Multi-Processor Systems
     -----------------------
If you are experiencing any problems with video painting or speed
deprivation during a pcANYWHERE session on multi-processor systems try 
the following registry key called ProcessorMask:

To add or modify these Registry entries, use the following steps:

1. Run the Registry Editor (REGEDIT.EXE or REGEDT32.EXE)
2. Edit the key:
   HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\Host
3. Create or edit the DWORD value with the ProcessorMask name.
4. Assign the desired value to the entry.
   0 = This would be the default value and would force pcANYWHERE32 to 
       use all processors in the system.
   1 = This would force pcANYWHERE32 to use only the first processor
       in the system. Use this to solve the video and speed issues.

====================
4. NEW UTILITIES
====================

4.1 Disk Creation Utilities
    -----------------------
    You are now able to generate pcAW 2.0 and pcAW 5.0 disks from  
    within Win3.1 and DOS. To do this go to the Utility folder. You
    will see two batch files. 
    * Mk_pca20 will create pcANYWHERE version 2.0 disks which you can 
      use for the Win3.1 or Win95 Operating Systems.
    * Mk_pca50 will create a pcANYWHERE version 5.0 disk which you can
      use for the DOS Operating System.

4.2 DOS Print Reg Items
    -------------------
    When printing from DOS the default is to print to the remote
    printer. The following registry keys allow you to print to the 
    host printer or host and remote printer. They are located on the
    CD in the Utility folder. 
    * dosprint_remote - (Default setting) Prints to remotes' printer.
    * dosprint_remote - Prints to hosts' printer.
    * dosprint_host_remote - Prints to both hosts' and remotes' 
                             printer.
    To use these just double-click on either of the keys while in or 
    out of session. 

4.3 pcANYWHERE Thin Clients
    -----------------------
    Information on pcANYWHERE Thin Clients (ActiveX Control, Plugin,
    and Java Client) are found in the Unsuppor.ted Folder.


  


