

To install the modules on your system, perform the following steps:

   1. Create a TEMP directory to store PMMERGE.ZIP file.
   2. Download PMMERGE.ZIP file into this TEMP directory.
   3. UNZIP the PMMERGE.ZIP file using the PKUNZIP utility.
   4. Boot to an alternate source so you can replace open DLL's.
   5. Open a command prompt.
   6. Change to drive letter where OS/2 is installed.
   7. Change to the OS2\DLL directory.
   8. Copy the following DLL's from the TEMP directory :
        PMMERGE.DLL
        GRE2VMAN.DLL
        VMAN.DLL
        SOFTDRAW.DLL
   9. Reboot the normal system.

Note: *.SYM files are included for debug purpose only and if you
need them, they too go into the OS2\DLL directory.
