These files will correct Suspend/Resume problems.

To install the modules on your system, perform the following steps:

   1. Create a TEMP directory to store SUSPRES.ZIP file.
   2. Download SUSPRES.ZIP file into this TEMP directory.
   3. UNZIP the SUSPRES.ZIP file using the PKUNZIP utility.
   4. Boot to an alternate souce as a DLL has to be replaced.
   5. Change to drive letter where OS/2 is installed.
   6. Change to the OS2\DLL directory.
   7. Copy the following file's from the TEMP directory :
        SCENTER.DLL
        SCENTER.SYM (used for Debug Only)
   8. Reboot system for changes to take effect.
