
								Jul. 1995
	     Ethernet Card Setup/Diagnostic program
			   for
      DE-621 Duplex and DE-620 Ethernet Pocket LAN Adapter
      ====================================================

Thank you for purchasing the D-Link Duplex for desktop, laptop
and notebook PCs to retain DE-620 and printer or key card connection.

Before you installing driver program, please refer to DE-620 or DE-621
manual to get more detail installation. A simple installation is as the
following figure.


				     
				   /	/
				 /    /  
			       /    /	*<------- connect to DE-620 only
			      Ŀ  *  
 connect     |\ 	          *	*<------- connect to printer or
 to pc	     |.|	        *  /	   key card
 printer <-- |.|ͳ DE-621 *  /
 port	     |.|	  	    /
	     |/ 	  



The SETUP620.EXE program (Setup/Diagnostic) lets you configure the DE-620
hardware settings, and test the state and cable connection of the card.

To run the program, insert the DE-620 driver program diskette in drive 'A' and
do the following:

	> cd \UTILITY	     --change directory to UTILITY
	> SETUP620	     --run the SETUP620.EXE program

	or

	> cd \UTILITY	     --change directory to UTILITY
	> SETUP620 /F	     --run the SETUP620.EXE with parameter /F
			       if the data in your EEPROM has been corrupted
			       or you cannot configure your card through normal
			       Please run "SETUP620 /F".


Menu Options
============

1.  SETUP lets you configure the hardware settings of DE-620.
    You have the option to view/change :

		 Node ID
		 Printer Port's Base Address
		 Printer Port's IRQ
		 Adapter Model
		 Connector
		 Printer Port's Mode
		 RAM Size
		 Printer Port Writes to Adapter
		 Printer Port Reads from Adapter
		 Runtime Configuration by


2.  DIAGNOSTIC lets you diagnose the state and cable connections of DE-620.
3.  DIAGNOSTIC lets you diagnose if DE-621 Duplex work with DE-620 is fine.

